ArmPlatformPkg/ArmRealViewEbPkg/ArmRealViewEb-RTSM-UniCore.fdf

   1 # FLASH layout file for ARM RealView EB.
   2 #
   3 # Copyright (c) 2009 - 2010, Apple Inc. All rights reserved.<BR>
   4 # Copyright (c) 2011 - 2014, ARM Limited. All rights reserved.
   5 #
   6 #    This program and the accompanying materials
   7 #    are licensed and made available under the terms and conditions of the BSD License
   8 #    which accompanies this distribution. The full text of the license may be found at
   9 #    http://opensource.org/licenses/bsd-license.php
  10 #
  11 #    THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  12 #    WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
  13 #
  14
  15 ################################################################################
  16 #
  17 # FD Section
  18 # The [FD] Section is made up of the definition statements and a
  19 # description of what goes into  the Flash Device Image.  Each FD section
  20 # defines one flash "device" image.  A flash device image may be one of
  21 # the following: Removable media bootable image (like a boot floppy
  22 # image,) an Option ROM image (that would be "flashed" into an add-in
  23 # card,) a System "Flash"  image (that would be burned into a system's
  24 # flash) or an Update ("Capsule") image that will be used to update and
  25 # existing system flash.
  26 #
  27 ################################################################################
  28
  29
  30 [FD.ArmRealViewEb_EFI]
  31 BaseAddress   = 0x40000000|gArmTokenSpaceGuid.PcdFdBaseAddress
  32 Size          = 0x00200000|gArmTokenSpaceGuid.PcdFdSize
  33 ErasePolarity = 1
  34 BlockSize     = 0x00010000
  35 NumBlocks     = 0x20
  36
  37 ################################################################################
  38 #
  39 # Following are lists of FD Region layout which correspond to the locations of different
  40 # images within the flash device.
  41 #
  42 # Regions must be defined in ascending order and may not overlap.
  43 #
  44 # A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
  45 # the pipe "|" character, followed by the size of the region, also in hex with the leading
  46 # "0x" characters. Like:
  47 # Offset|Size
  48 # PcdOffsetCName|PcdSizeCName
  49 # RegionType <FV, DATA, or FILE>
  50 #
  51 ################################################################################
  52
  53 0x00000000|0x00050000
  54 gArmTokenSpaceGuid.PcdSecureFvBaseAddress|gArmTokenSpaceGuid.PcdSecureFvSize
  55 FV = FVMAIN_SEC
  56
  57 0x00050000|0x00150000
  58 gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
  59 FV = FVMAIN_COMPACT
  60
  61 ################################################################################
  62 #
  63 # FV Section
  64 #
  65 # [FV] section is used to define what components or modules are placed within a flash
  66 # device file.  This section also defines order the components and modules are positioned
  67 # within the image.  The [FV] section consists of define statements, set statements and
  68 # module statements.
  69 #
  70 ################################################################################
  71
  72 [FV.FVMAIN_SEC]
  73 FvAlignment        = 8
  74 ERASE_POLARITY     = 1
  75 MEMORY_MAPPED      = TRUE
  76 STICKY_WRITE       = TRUE
  77 LOCK_CAP           = TRUE
  78 LOCK_STATUS        = TRUE
  79 WRITE_DISABLED_CAP = TRUE
  80 WRITE_ENABLED_CAP  = TRUE
  81 WRITE_STATUS       = TRUE
  82 WRITE_LOCK_CAP     = TRUE
  83 WRITE_LOCK_STATUS  = TRUE
  84 READ_DISABLED_CAP  = TRUE
  85 READ_ENABLED_CAP   = TRUE
  86 READ_STATUS        = TRUE
  87 READ_LOCK_CAP      = TRUE
  88 READ_LOCK_STATUS   = TRUE
  89
  90   INF ArmPlatformPkg/Sec/Sec.inf
  91
  92
  93 [FV.FvMain]
  94 BlockSize          = 0x40
  95 NumBlocks          = 0         # This FV gets compressed so make it just big enough
  96 FvAlignment        = 8         # FV alignment and FV attributes setting.
  97 ERASE_POLARITY     = 1
  98 MEMORY_MAPPED      = TRUE
  99 STICKY_WRITE       = TRUE
 100 LOCK_CAP           = TRUE
 101 LOCK_STATUS        = TRUE
 102 WRITE_DISABLED_CAP = TRUE
 103 WRITE_ENABLED_CAP  = TRUE
 104 WRITE_STATUS       = TRUE
 105 WRITE_LOCK_CAP     = TRUE
 106 WRITE_LOCK_STATUS  = TRUE
 107 READ_DISABLED_CAP  = TRUE
 108 READ_ENABLED_CAP   = TRUE
 109 READ_STATUS        = TRUE
 110 READ_LOCK_CAP      = TRUE
 111 READ_LOCK_STATUS   = TRUE
 112 FvNameGuid         = 14801114-da6a-4113-985b-dc876337a15e
 113
 114   INF MdeModulePkg/Core/Dxe/DxeMain.inf
 115
 116   #
 117   # PI DXE Drivers producing Architectural Protocols (EFI Services)
 118   #
 119   INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf
 120   INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
 121   INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
 122   INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
 123   INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
 124   INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf
 125   INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf
 126   INF EmbeddedPkg/EmbeddedMonotonicCounter/EmbeddedMonotonicCounter.inf
 127   INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
 128   INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
 129   INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf
 130
 131   INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
 132   INF ArmPlatformPkg/Drivers/LcdGraphicsOutputDxe/PL111LcdGraphicsOutputDxe.inf
 133
 134   #
 135   # Multiple Console IO support
 136   #
 137   INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
 138   INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
 139   INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
 140   INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
 141   INF EmbeddedPkg/SerialDxe/SerialDxe.inf
 142
 143   INF ArmPkg/Drivers/ArmGic/ArmGicDxe.inf
 144   INF ArmPlatformPkg/Drivers/SP804TimerDxe/SP804TimerDxe.inf
 145
 146   INF ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf
 147
 148   #
 149   # Semi-hosting filesystem
 150   #
 151   INF ArmPkg/Filesystem/SemihostFs/SemihostFs.inf
 152
 153   #
 154   # Multimedia Card Interface
 155   #
 156   INF EmbeddedPkg/Universal/MmcDxe/MmcDxe.inf
 157   INF ArmPlatformPkg/Drivers/PL180MciDxe/PL180MciDxe.inf
 158
 159   # FV Filesystem
 160   INF MdeModulePkg/Universal/FvSimpleFileSystemDxe/FvSimpleFileSystemDxe.inf
 161
 162   #
 163   # FAT filesystem + GPT/MBR partitioning
 164   #
 165   INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
 166   INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
 167   INF FatBinPkg/EnhancedFatDxe/Fat.inf
 168   INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
 169
 170   #
 171   # UEFI application (Shell Embedded Boot Loader)
 172   #
 173   INF ShellBinPkg/UefiShell/UefiShell.inf
 174
 175   #
 176   # Bds
 177   #
 178   INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
 179   INF ArmPlatformPkg/Bds/Bds.inf
 180
 181
 182 [FV.FVMAIN_COMPACT]
 183 FvAlignment        = 8
 184 ERASE_POLARITY     = 1
 185 MEMORY_MAPPED      = TRUE
 186 STICKY_WRITE       = TRUE
 187 LOCK_CAP           = TRUE
 188 LOCK_STATUS        = TRUE
 189 WRITE_DISABLED_CAP = TRUE
 190 WRITE_ENABLED_CAP  = TRUE
 191 WRITE_STATUS       = TRUE
 192 WRITE_LOCK_CAP     = TRUE
 193 WRITE_LOCK_STATUS  = TRUE
 194 READ_DISABLED_CAP  = TRUE
 195 READ_ENABLED_CAP   = TRUE
 196 READ_STATUS        = TRUE
 197 READ_LOCK_CAP      = TRUE
 198 READ_LOCK_STATUS   = TRUE
 199
 200 !if $(EDK2_SKIP_PEICORE) == 1
 201   INF ArmPlatformPkg/PrePi/PeiUniCore.inf
 202 !else
 203   INF ArmPlatformPkg/PrePeiCore/PrePeiCoreUniCore.inf
 204   INF MdeModulePkg/Core/Pei/PeiMain.inf
 205   INF ArmPlatformPkg/PlatformPei/PlatformPeim.inf
 206   INF ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.inf
 207   INF ArmPkg/Drivers/CpuPei/CpuPei.inf
 208   INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf
 209   INF IntelFrameworkModulePkg/Universal/StatusCode/Pei/StatusCodePei.inf
 210   INF MdeModulePkg/Universal/Variable/Pei/VariablePei.inf
 211   INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf
 212 !endif
 213
 214   FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
 215     SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
 216       SECTION FV_IMAGE = FVMAIN
 217     }
 218   }
 219
 220 ################################################################################
 221 #
 222 # Rules are use with the [FV] section's module INF type to define
 223 # how an FFS file is created for a given INF file. The following Rule are the default
 224 # rules for the different module type. User can add the customized rules to define the
 225 # content of the FFS file.
 226 #
 227 ################################################################################
 228
 229
 230 ############################################################################
 231 # Example of a DXE_DRIVER FFS file with a Checksum encapsulation section   #
 232 ############################################################################
 233 #
 234 #[Rule.Common.DXE_DRIVER]
 235 #  FILE DRIVER = $(NAMED_GUID) {
 236 #    DXE_DEPEX    DXE_DEPEX               Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 237 #    COMPRESS PI_STD {
 238 #      GUIDED {
 239 #        PE32     PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi
 240 #        UI       STRING="$(MODULE_NAME)" Optional
 241 #        VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 242 #      }
 243 #    }
 244 #  }
 245 #
 246 ############################################################################
 247
 248 [Rule.Common.SEC]
 249   FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {
 250     TE  TE    Align = 32                  $(INF_OUTPUT)/$(MODULE_NAME).efi
 251   }
 252
 253 [Rule.Common.PEI_CORE]
 254   FILE PEI_CORE = $(NAMED_GUID) {
 255     TE     TE                             $(INF_OUTPUT)/$(MODULE_NAME).efi
 256     UI     STRING ="$(MODULE_NAME)" Optional
 257   }
 258
 259 [Rule.Common.PEIM]
 260   FILE PEIM = $(NAMED_GUID) {
 261      PEI_DEPEX PEI_DEPEX Optional         $(INF_OUTPUT)/$(MODULE_NAME).depex
 262      TE       TE                          $(INF_OUTPUT)/$(MODULE_NAME).efi
 263      UI       STRING="$(MODULE_NAME)" Optional
 264   }
 265
 266 [Rule.Common.PEIM.TIANOCOMPRESSED]
 267   FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {
 268     PEI_DEPEX PEI_DEPEX Optional          $(INF_OUTPUT)/$(MODULE_NAME).depex
 269     GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {
 270       PE32      PE32                      $(INF_OUTPUT)/$(MODULE_NAME).efi
 271       UI        STRING="$(MODULE_NAME)" Optional
 272     }
 273   }
 274
 275 [Rule.Common.DXE_CORE]
 276   FILE DXE_CORE = $(NAMED_GUID) {
 277     PE32     PE32                        $(INF_OUTPUT)/$(MODULE_NAME).efi
 278     UI       STRING="$(MODULE_NAME)" Optional
 279   }
 280
 281 [Rule.Common.UEFI_DRIVER]
 282   FILE DRIVER = $(NAMED_GUID) {
 283     DXE_DEPEX    DXE_DEPEX               Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 284     PE32         PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi
 285     UI           STRING="$(MODULE_NAME)" Optional
 286   }
 287
 288 [Rule.Common.DXE_DRIVER]
 289   FILE DRIVER = $(NAMED_GUID) {
 290     DXE_DEPEX    DXE_DEPEX               Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 291     PE32         PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi
 292     UI           STRING="$(MODULE_NAME)" Optional
 293   }
 294
 295 [Rule.Common.DXE_RUNTIME_DRIVER]
 296   FILE DRIVER = $(NAMED_GUID) {
 297     DXE_DEPEX    DXE_DEPEX               Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 298     PE32         PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi
 299     UI           STRING="$(MODULE_NAME)" Optional
 300   }
 301
 302 [Rule.Common.UEFI_APPLICATION]
 303   FILE APPLICATION = $(NAMED_GUID) {
 304     UI     STRING ="$(MODULE_NAME)" Optional
 305     PE32   PE32                          $(INF_OUTPUT)/$(MODULE_NAME).efi
 306   }
 307
 308 [Rule.Common.UEFI_DRIVER.BINARY]
 309   FILE DRIVER = $(NAMED_GUID) {
 310     DXE_DEPEX DXE_DEPEX Optional      |.depex
 311     PE32      PE32                    |.efi
 312     UI        STRING="$(MODULE_NAME)" Optional
 313     VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 314   }
 315
 316 [Rule.Common.UEFI_APPLICATION.BINARY]
 317   FILE APPLICATION = $(NAMED_GUID) {
 318     PE32      PE32                    |.efi
 319     UI        STRING="$(MODULE_NAME)" Optional
 320     VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 321   }