2 # build a platform or a module
4 # Copyright (c) 2014, Hewlett-Packard Development Company, L.P.<BR>
5 # Copyright (c) 2007 - 2016, Intel Corporation. All rights reserved.<BR>
7 # This program and the accompanying materials
8 # are licensed and made available under the terms and conditions of the BSD License
9 # which accompanies this distribution. The full text of the license may be found at
10 # http://opensource.org/licenses/bsd-license.php
12 # THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
13 # WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
19 import Common
.LongFilePathOs
as os
27 import encodings
.ascii
30 from threading
import *
31 from optparse
import OptionParser
32 from subprocess
import *
33 from Common
import Misc
as Utils
35 from Common
.LongFilePathSupport
import OpenLongFilePath
as open
36 from Common
.LongFilePathSupport
import LongFilePath
37 from Common
.TargetTxtClassObject
import *
38 from Common
.ToolDefClassObject
import *
39 from Common
.DataType
import *
40 from Common
.BuildVersion
import gBUILD_VERSION
41 from AutoGen
.AutoGen
import *
42 from Common
.BuildToolError
import *
43 from Workspace
.WorkspaceDatabase
import *
44 from Common
.MultipleWorkspace
import MultipleWorkspace
as mws
46 from BuildReport
import BuildReport
47 from GenPatchPcdTable
.GenPatchPcdTable
import *
48 from PatchPcdValue
.PatchPcdValue
import *
50 import Common
.EdkLogger
51 import Common
.GlobalData
as GlobalData
53 # Version and Copyright
54 VersionNumber
= "0.60" + ' ' + gBUILD_VERSION
55 __version__
= "%prog Version " + VersionNumber
56 __copyright__
= "Copyright (c) 2007 - 2016, Intel Corporation All rights reserved."
58 ## standard targets of build command
59 gSupportedTarget
= ['all', 'genc', 'genmake', 'modules', 'libraries', 'fds', 'clean', 'cleanall', 'cleanlib', 'run']
61 ## build configuration file
62 gBuildConfiguration
= "target.txt"
63 gToolsDefinition
= "tools_def.txt"
65 TemporaryTablePattern
= re
.compile(r
'^_\d+_\d+_[a-fA-F0-9]+$')
68 ## Check environment PATH variable to make sure the specified tool is found
70 # If the tool is found in the PATH, then True is returned
71 # Otherwise, False is returned
73 def IsToolInPath(tool
):
74 if os
.environ
.has_key('PATHEXT'):
75 extns
= os
.environ
['PATHEXT'].split(os
.path
.pathsep
)
78 for pathDir
in os
.environ
['PATH'].split(os
.path
.pathsep
):
80 if os
.path
.exists(os
.path
.join(pathDir
, tool
+ ext
)):
84 ## Check environment variables
86 # Check environment variables that must be set for build. Currently they are
88 # WORKSPACE The directory all packages/platforms start from
89 # EDK_TOOLS_PATH The directory contains all tools needed by the build
90 # PATH $(EDK_TOOLS_PATH)/Bin/<sys> must be set in PATH
92 # If any of above environment variable is not set or has error, the build
95 def CheckEnvVariable():
97 if "WORKSPACE" not in os
.environ
:
98 EdkLogger
.error("build", ATTRIBUTE_NOT_AVAILABLE
, "Environment variable not found",
99 ExtraData
="WORKSPACE")
101 WorkspaceDir
= os
.path
.normcase(os
.path
.normpath(os
.environ
["WORKSPACE"]))
102 if not os
.path
.exists(WorkspaceDir
):
103 EdkLogger
.error("build", FILE_NOT_FOUND
, "WORKSPACE doesn't exist", ExtraData
="%s" % WorkspaceDir
)
104 elif ' ' in WorkspaceDir
:
105 EdkLogger
.error("build", FORMAT_NOT_SUPPORTED
, "No space is allowed in WORKSPACE path",
106 ExtraData
=WorkspaceDir
)
107 os
.environ
["WORKSPACE"] = WorkspaceDir
109 # set multiple workspace
110 PackagesPath
= os
.getenv("PACKAGES_PATH")
111 mws
.setWs(WorkspaceDir
, PackagesPath
)
114 # Check EFI_SOURCE (Edk build convention). EDK_SOURCE will always point to ECP
116 if "ECP_SOURCE" not in os
.environ
:
117 os
.environ
["ECP_SOURCE"] = mws
.join(WorkspaceDir
, GlobalData
.gEdkCompatibilityPkg
)
118 if "EFI_SOURCE" not in os
.environ
:
119 os
.environ
["EFI_SOURCE"] = os
.environ
["ECP_SOURCE"]
120 if "EDK_SOURCE" not in os
.environ
:
121 os
.environ
["EDK_SOURCE"] = os
.environ
["ECP_SOURCE"]
124 # Unify case of characters on case-insensitive systems
126 EfiSourceDir
= os
.path
.normcase(os
.path
.normpath(os
.environ
["EFI_SOURCE"]))
127 EdkSourceDir
= os
.path
.normcase(os
.path
.normpath(os
.environ
["EDK_SOURCE"]))
128 EcpSourceDir
= os
.path
.normcase(os
.path
.normpath(os
.environ
["ECP_SOURCE"]))
130 os
.environ
["EFI_SOURCE"] = EfiSourceDir
131 os
.environ
["EDK_SOURCE"] = EdkSourceDir
132 os
.environ
["ECP_SOURCE"] = EcpSourceDir
133 os
.environ
["EDK_TOOLS_PATH"] = os
.path
.normcase(os
.environ
["EDK_TOOLS_PATH"])
135 if not os
.path
.exists(EcpSourceDir
):
136 EdkLogger
.verbose("ECP_SOURCE = %s doesn't exist. Edk modules could not be built." % EcpSourceDir
)
137 elif ' ' in EcpSourceDir
:
138 EdkLogger
.error("build", FORMAT_NOT_SUPPORTED
, "No space is allowed in ECP_SOURCE path",
139 ExtraData
=EcpSourceDir
)
140 if not os
.path
.exists(EdkSourceDir
):
141 if EdkSourceDir
== EcpSourceDir
:
142 EdkLogger
.verbose("EDK_SOURCE = %s doesn't exist. Edk modules could not be built." % EdkSourceDir
)
144 EdkLogger
.error("build", PARAMETER_INVALID
, "EDK_SOURCE does not exist",
145 ExtraData
=EdkSourceDir
)
146 elif ' ' in EdkSourceDir
:
147 EdkLogger
.error("build", FORMAT_NOT_SUPPORTED
, "No space is allowed in EDK_SOURCE path",
148 ExtraData
=EdkSourceDir
)
149 if not os
.path
.exists(EfiSourceDir
):
150 if EfiSourceDir
== EcpSourceDir
:
151 EdkLogger
.verbose("EFI_SOURCE = %s doesn't exist. Edk modules could not be built." % EfiSourceDir
)
153 EdkLogger
.error("build", PARAMETER_INVALID
, "EFI_SOURCE does not exist",
154 ExtraData
=EfiSourceDir
)
155 elif ' ' in EfiSourceDir
:
156 EdkLogger
.error("build", FORMAT_NOT_SUPPORTED
, "No space is allowed in EFI_SOURCE path",
157 ExtraData
=EfiSourceDir
)
159 # check those variables on single workspace case
161 # change absolute path to relative path to WORKSPACE
162 if EfiSourceDir
.upper().find(WorkspaceDir
.upper()) != 0:
163 EdkLogger
.error("build", PARAMETER_INVALID
, "EFI_SOURCE is not under WORKSPACE",
164 ExtraData
="WORKSPACE = %s\n EFI_SOURCE = %s" % (WorkspaceDir
, EfiSourceDir
))
165 if EdkSourceDir
.upper().find(WorkspaceDir
.upper()) != 0:
166 EdkLogger
.error("build", PARAMETER_INVALID
, "EDK_SOURCE is not under WORKSPACE",
167 ExtraData
="WORKSPACE = %s\n EDK_SOURCE = %s" % (WorkspaceDir
, EdkSourceDir
))
168 if EcpSourceDir
.upper().find(WorkspaceDir
.upper()) != 0:
169 EdkLogger
.error("build", PARAMETER_INVALID
, "ECP_SOURCE is not under WORKSPACE",
170 ExtraData
="WORKSPACE = %s\n ECP_SOURCE = %s" % (WorkspaceDir
, EcpSourceDir
))
172 # check EDK_TOOLS_PATH
173 if "EDK_TOOLS_PATH" not in os
.environ
:
174 EdkLogger
.error("build", ATTRIBUTE_NOT_AVAILABLE
, "Environment variable not found",
175 ExtraData
="EDK_TOOLS_PATH")
178 if "PATH" not in os
.environ
:
179 EdkLogger
.error("build", ATTRIBUTE_NOT_AVAILABLE
, "Environment variable not found",
182 GlobalData
.gWorkspace
= WorkspaceDir
183 GlobalData
.gEfiSource
= EfiSourceDir
184 GlobalData
.gEdkSource
= EdkSourceDir
185 GlobalData
.gEcpSource
= EcpSourceDir
187 GlobalData
.gGlobalDefines
["WORKSPACE"] = WorkspaceDir
188 GlobalData
.gGlobalDefines
["EFI_SOURCE"] = EfiSourceDir
189 GlobalData
.gGlobalDefines
["EDK_SOURCE"] = EdkSourceDir
190 GlobalData
.gGlobalDefines
["ECP_SOURCE"] = EcpSourceDir
191 GlobalData
.gGlobalDefines
["EDK_TOOLS_PATH"] = os
.environ
["EDK_TOOLS_PATH"]
193 ## Get normalized file path
195 # Convert the path to be local format, and remove the WORKSPACE path at the
196 # beginning if the file path is given in full path.
198 # @param FilePath File path to be normalized
199 # @param Workspace Workspace path which the FilePath will be checked against
201 # @retval string The normalized file path
203 def NormFile(FilePath
, Workspace
):
204 # check if the path is absolute or relative
205 if os
.path
.isabs(FilePath
):
206 FileFullPath
= os
.path
.normpath(FilePath
)
208 FileFullPath
= os
.path
.normpath(mws
.join(Workspace
, FilePath
))
209 Workspace
= mws
.getWs(Workspace
, FilePath
)
211 # check if the file path exists or not
212 if not os
.path
.isfile(FileFullPath
):
213 EdkLogger
.error("build", FILE_NOT_FOUND
, ExtraData
="\t%s (Please give file in absolute path or relative to WORKSPACE)" % FileFullPath
)
215 # remove workspace directory from the beginning part of the file path
216 if Workspace
[-1] in ["\\", "/"]:
217 return FileFullPath
[len(Workspace
):]
219 return FileFullPath
[(len(Workspace
) + 1):]
221 ## Get the output of an external program
223 # This is the entrance method of thread reading output of an external program and
224 # putting them in STDOUT/STDERR of current program.
226 # @param From The stream message read from
227 # @param To The stream message put on
228 # @param ExitFlag The flag used to indicate stopping reading
230 def ReadMessage(From
, To
, ExitFlag
):
232 # read one line a time
233 Line
= From
.readline()
234 # empty string means "end"
235 if Line
!= None and Line
!= "":
242 ## Launch an external program
244 # This method will call subprocess.Popen to execute an external program with
245 # given options in specified directory. Because of the dead-lock issue during
246 # redirecting output of the external program, threads are used to to do the
249 # @param Command A list or string containing the call of the program
250 # @param WorkingDir The directory in which the program will be running
252 def LaunchCommand(Command
, WorkingDir
):
253 # if working directory doesn't exist, Popen() will raise an exception
254 if not os
.path
.isdir(WorkingDir
):
255 EdkLogger
.error("build", FILE_NOT_FOUND
, ExtraData
=WorkingDir
)
257 # Command is used as the first Argument in following Popen().
258 # It could be a string or sequence. We find that if command is a string in following Popen(),
259 # ubuntu may fail with an error message that the command is not found.
260 # So here we may need convert command from string to list instance.
261 if not isinstance(Command
, list):
262 if platform
.system() != 'Windows':
263 Command
= Command
.split()
266 EndOfProcedure
= None
269 Proc
= Popen(Command
, stdout
=PIPE
, stderr
=PIPE
, env
=os
.environ
, cwd
=WorkingDir
, bufsize
=-1)
271 # launch two threads to read the STDOUT and STDERR
272 EndOfProcedure
= Event()
273 EndOfProcedure
.clear()
275 StdOutThread
= Thread(target
=ReadMessage
, args
=(Proc
.stdout
, EdkLogger
.info
, EndOfProcedure
))
276 StdOutThread
.setName("STDOUT-Redirector")
277 StdOutThread
.setDaemon(False)
281 StdErrThread
= Thread(target
=ReadMessage
, args
=(Proc
.stderr
, EdkLogger
.quiet
, EndOfProcedure
))
282 StdErrThread
.setName("STDERR-Redirector")
283 StdErrThread
.setDaemon(False)
286 # waiting for program exit
288 except: # in case of aborting
289 # terminate the threads redirecting the program output
290 EdkLogger
.quiet("(Python %s on %s) " % (platform
.python_version(), sys
.platform
) + traceback
.format_exc())
291 if EndOfProcedure
!= None:
294 if type(Command
) != type(""):
295 Command
= " ".join(Command
)
296 EdkLogger
.error("build", COMMAND_FAILURE
, "Failed to start command", ExtraData
="%s [%s]" % (Command
, WorkingDir
))
303 # check the return code of the program
304 if Proc
.returncode
!= 0:
305 if type(Command
) != type(""):
306 Command
= " ".join(Command
)
307 # print out the Response file and its content when make failure
308 RespFile
= os
.path
.join(WorkingDir
, 'OUTPUT', 'respfilelist.txt')
309 if os
.path
.isfile(RespFile
):
311 RespContent
= f
.read()
313 EdkLogger
.info(RespContent
)
315 EdkLogger
.error("build", COMMAND_FAILURE
, ExtraData
="%s [%s]" % (Command
, WorkingDir
))
317 ## The smallest unit that can be built in multi-thread build mode
319 # This is the base class of build unit. The "Obj" parameter must provide
320 # __str__(), __eq__() and __hash__() methods. Otherwise there could be build units
323 # Currently the "Obj" should be only ModuleAutoGen or PlatformAutoGen objects.
328 # @param self The object pointer
329 # @param Obj The object the build is working on
330 # @param Target The build target name, one of gSupportedTarget
331 # @param Dependency The BuildUnit(s) which must be completed in advance
332 # @param WorkingDir The directory build command starts in
334 def __init__(self
, Obj
, BuildCommand
, Target
, Dependency
, WorkingDir
="."):
335 self
.BuildObject
= Obj
336 self
.Dependency
= Dependency
337 self
.WorkingDir
= WorkingDir
339 self
.BuildCommand
= BuildCommand
341 EdkLogger
.error("build", OPTION_MISSING
,
342 "No build command found for this module. "
343 "Please check your setting of %s_%s_%s_MAKE_PATH in Conf/tools_def.txt file." %
344 (Obj
.BuildTarget
, Obj
.ToolChain
, Obj
.Arch
),
350 # It just returns the string representation of self.BuildObject
352 # @param self The object pointer
355 return str(self
.BuildObject
)
357 ## "==" operator method
359 # It just compares self.BuildObject with "Other". So self.BuildObject must
360 # provide its own __eq__() method.
362 # @param self The object pointer
363 # @param Other The other BuildUnit object compared to
365 def __eq__(self
, Other
):
366 return Other
!= None and self
.BuildObject
== Other
.BuildObject \
367 and self
.BuildObject
.Arch
== Other
.BuildObject
.Arch
371 # It just returns the hash value of self.BuildObject which must be hashable.
373 # @param self The object pointer
376 return hash(self
.BuildObject
) + hash(self
.BuildObject
.Arch
)
379 return repr(self
.BuildObject
)
381 ## The smallest module unit that can be built by nmake/make command in multi-thread build mode
383 # This class is for module build by nmake/make build system. The "Obj" parameter
384 # must provide __str__(), __eq__() and __hash__() methods. Otherwise there could
385 # be make units missing build.
387 # Currently the "Obj" should be only ModuleAutoGen object.
389 class ModuleMakeUnit(BuildUnit
):
392 # @param self The object pointer
393 # @param Obj The ModuleAutoGen object the build is working on
394 # @param Target The build target name, one of gSupportedTarget
396 def __init__(self
, Obj
, Target
):
397 Dependency
= [ModuleMakeUnit(La
, Target
) for La
in Obj
.LibraryAutoGenList
]
398 BuildUnit
.__init
__(self
, Obj
, Obj
.BuildCommand
, Target
, Dependency
, Obj
.MakeFileDir
)
399 if Target
in [None, "", "all"]:
400 self
.Target
= "tbuild"
402 ## The smallest platform unit that can be built by nmake/make command in multi-thread build mode
404 # This class is for platform build by nmake/make build system. The "Obj" parameter
405 # must provide __str__(), __eq__() and __hash__() methods. Otherwise there could
406 # be make units missing build.
408 # Currently the "Obj" should be only PlatformAutoGen object.
410 class PlatformMakeUnit(BuildUnit
):
413 # @param self The object pointer
414 # @param Obj The PlatformAutoGen object the build is working on
415 # @param Target The build target name, one of gSupportedTarget
417 def __init__(self
, Obj
, Target
):
418 Dependency
= [ModuleMakeUnit(Lib
, Target
) for Lib
in self
.BuildObject
.LibraryAutoGenList
]
419 Dependency
.extend([ModuleMakeUnit(Mod
, Target
) for Mod
in self
.BuildObject
.ModuleAutoGenList
])
420 BuildUnit
.__init
__(self
, Obj
, Obj
.BuildCommand
, Target
, Dependency
, Obj
.MakeFileDir
)
422 ## The class representing the task of a module build or platform build
424 # This class manages the build tasks in multi-thread build mode. Its jobs include
425 # scheduling thread running, catching thread error, monitor the thread status, etc.
428 # queue for tasks waiting for schedule
429 _PendingQueue
= sdict()
430 _PendingQueueLock
= threading
.Lock()
432 # queue for tasks ready for running
433 _ReadyQueue
= sdict()
434 _ReadyQueueLock
= threading
.Lock()
436 # queue for run tasks
437 _RunningQueue
= sdict()
438 _RunningQueueLock
= threading
.Lock()
440 # queue containing all build tasks, in case duplicate build
443 # flag indicating error occurs in a running thread
444 _ErrorFlag
= threading
.Event()
448 # BoundedSemaphore object used to control the number of running threads
451 # flag indicating if the scheduler is started or not
452 _SchedulerStopped
= threading
.Event()
453 _SchedulerStopped
.set()
455 ## Start the task scheduler thread
457 # @param MaxThreadNumber The maximum thread number
458 # @param ExitFlag Flag used to end the scheduler
461 def StartScheduler(MaxThreadNumber
, ExitFlag
):
462 SchedulerThread
= Thread(target
=BuildTask
.Scheduler
, args
=(MaxThreadNumber
, ExitFlag
))
463 SchedulerThread
.setName("Build-Task-Scheduler")
464 SchedulerThread
.setDaemon(False)
465 SchedulerThread
.start()
466 # wait for the scheduler to be started, especially useful in Linux
467 while not BuildTask
.IsOnGoing():
472 # @param MaxThreadNumber The maximum thread number
473 # @param ExitFlag Flag used to end the scheduler
476 def Scheduler(MaxThreadNumber
, ExitFlag
):
477 BuildTask
._SchedulerStopped
.clear()
479 # use BoundedSemaphore to control the maximum running threads
480 BuildTask
._Thread
= BoundedSemaphore(MaxThreadNumber
)
482 # scheduling loop, which will exits when no pending/ready task and
483 # indicated to do so, or there's error in running thread
485 while (len(BuildTask
._PendingQueue
) > 0 or len(BuildTask
._ReadyQueue
) > 0 \
486 or not ExitFlag
.isSet()) and not BuildTask
._ErrorFlag
.isSet():
487 EdkLogger
.debug(EdkLogger
.DEBUG_8
, "Pending Queue (%d), Ready Queue (%d)"
488 % (len(BuildTask
._PendingQueue
), len(BuildTask
._ReadyQueue
)))
490 # get all pending tasks
491 BuildTask
._PendingQueueLock
.acquire()
492 BuildObjectList
= BuildTask
._PendingQueue
.keys()
494 # check if their dependency is resolved, and if true, move them
497 for BuildObject
in BuildObjectList
:
498 Bt
= BuildTask
._PendingQueue
[BuildObject
]
500 BuildTask
._ReadyQueue
[BuildObject
] = BuildTask
._PendingQueue
.pop(BuildObject
)
501 BuildTask
._PendingQueueLock
.release()
503 # launch build thread until the maximum number of threads is reached
504 while not BuildTask
._ErrorFlag
.isSet():
505 # empty ready queue, do nothing further
506 if len(BuildTask
._ReadyQueue
) == 0:
509 # wait for active thread(s) exit
510 BuildTask
._Thread
.acquire(True)
512 # start a new build thread
513 Bo
= BuildTask
._ReadyQueue
.keys()[0]
514 Bt
= BuildTask
._ReadyQueue
.pop(Bo
)
516 # move into running queue
517 BuildTask
._RunningQueueLock
.acquire()
518 BuildTask
._RunningQueue
[Bo
] = Bt
519 BuildTask
._RunningQueueLock
.release()
528 # wait for all running threads exit
529 if BuildTask
._ErrorFlag
.isSet():
530 EdkLogger
.quiet("\nWaiting for all build threads exit...")
531 # while not BuildTask._ErrorFlag.isSet() and \
532 while len(BuildTask
._RunningQueue
) > 0:
533 EdkLogger
.verbose("Waiting for thread ending...(%d)" % len(BuildTask
._RunningQueue
))
534 EdkLogger
.debug(EdkLogger
.DEBUG_8
, "Threads [%s]" % ", ".join([Th
.getName() for Th
in threading
.enumerate()]))
537 except BaseException
, X
:
539 # TRICK: hide the output of threads left runing, so that the user can
540 # catch the error message easily
542 EdkLogger
.SetLevel(EdkLogger
.ERROR
)
543 BuildTask
._ErrorFlag
.set()
544 BuildTask
._ErrorMessage
= "build thread scheduler error\n\t%s" % str(X
)
546 BuildTask
._PendingQueue
.clear()
547 BuildTask
._ReadyQueue
.clear()
548 BuildTask
._RunningQueue
.clear()
549 BuildTask
._TaskQueue
.clear()
550 BuildTask
._SchedulerStopped
.set()
552 ## Wait for all running method exit
555 def WaitForComplete():
556 BuildTask
._SchedulerStopped
.wait()
558 ## Check if the scheduler is running or not
562 return not BuildTask
._SchedulerStopped
.isSet()
567 if BuildTask
.IsOnGoing():
568 BuildTask
._ErrorFlag
.set()
569 BuildTask
.WaitForComplete()
571 ## Check if there's error in running thread
573 # Since the main thread cannot catch exceptions in other thread, we have to
574 # use threading.Event to communicate this formation to main thread.
578 return BuildTask
._ErrorFlag
.isSet()
580 ## Get error message in running thread
582 # Since the main thread cannot catch exceptions in other thread, we have to
583 # use a static variable to communicate this message to main thread.
586 def GetErrorMessage():
587 return BuildTask
._ErrorMessage
589 ## Factory method to create a BuildTask object
591 # This method will check if a module is building or has been built. And if
592 # true, just return the associated BuildTask object in the _TaskQueue. If
593 # not, create and return a new BuildTask object. The new BuildTask object
594 # will be appended to the _PendingQueue for scheduling later.
596 # @param BuildItem A BuildUnit object representing a build object
597 # @param Dependency The dependent build object of BuildItem
600 def New(BuildItem
, Dependency
=None):
601 if BuildItem
in BuildTask
._TaskQueue
:
602 Bt
= BuildTask
._TaskQueue
[BuildItem
]
606 Bt
._Init
(BuildItem
, Dependency
)
607 BuildTask
._TaskQueue
[BuildItem
] = Bt
609 BuildTask
._PendingQueueLock
.acquire()
610 BuildTask
._PendingQueue
[BuildItem
] = Bt
611 BuildTask
._PendingQueueLock
.release()
615 ## The real constructor of BuildTask
617 # @param BuildItem A BuildUnit object representing a build object
618 # @param Dependency The dependent build object of BuildItem
620 def _Init(self
, BuildItem
, Dependency
=None):
621 self
.BuildItem
= BuildItem
623 self
.DependencyList
= []
624 if Dependency
== None:
625 Dependency
= BuildItem
.Dependency
627 Dependency
.extend(BuildItem
.Dependency
)
628 self
.AddDependency(Dependency
)
629 # flag indicating build completes, used to avoid unnecessary re-build
630 self
.CompleteFlag
= False
632 ## Check if all dependent build tasks are completed or not
636 for Dep
in self
.DependencyList
:
637 if Dep
.CompleteFlag
== True:
644 ## Add dependent build task
646 # @param Dependency The list of dependent build objects
648 def AddDependency(self
, Dependency
):
649 for Dep
in Dependency
:
650 if not Dep
.BuildObject
.IsBinaryModule
:
651 self
.DependencyList
.append(BuildTask
.New(Dep
)) # BuildTask list
653 ## The thread wrapper of LaunchCommand function
655 # @param Command A list or string contains the call of the command
656 # @param WorkingDir The directory in which the program will be running
658 def _CommandThread(self
, Command
, WorkingDir
):
660 LaunchCommand(Command
, WorkingDir
)
661 self
.CompleteFlag
= True
664 # TRICK: hide the output of threads left runing, so that the user can
665 # catch the error message easily
667 if not BuildTask
._ErrorFlag
.isSet():
668 GlobalData
.gBuildingModule
= "%s [%s, %s, %s]" % (str(self
.BuildItem
.BuildObject
),
669 self
.BuildItem
.BuildObject
.Arch
,
670 self
.BuildItem
.BuildObject
.ToolChain
,
671 self
.BuildItem
.BuildObject
.BuildTarget
673 EdkLogger
.SetLevel(EdkLogger
.ERROR
)
674 BuildTask
._ErrorFlag
.set()
675 BuildTask
._ErrorMessage
= "%s broken\n %s [%s]" % \
676 (threading
.currentThread().getName(), Command
, WorkingDir
)
677 # indicate there's a thread is available for another build task
678 BuildTask
._RunningQueueLock
.acquire()
679 BuildTask
._RunningQueue
.pop(self
.BuildItem
)
680 BuildTask
._RunningQueueLock
.release()
681 BuildTask
._Thread
.release()
683 ## Start build task thread
686 EdkLogger
.quiet("Building ... %s" % repr(self
.BuildItem
))
687 Command
= self
.BuildItem
.BuildCommand
+ [self
.BuildItem
.Target
]
688 self
.BuildTread
= Thread(target
=self
._CommandThread
, args
=(Command
, self
.BuildItem
.WorkingDir
))
689 self
.BuildTread
.setName("build thread")
690 self
.BuildTread
.setDaemon(False)
691 self
.BuildTread
.start()
693 ## The class contains the information related to EFI image
698 # Constructor will load all required image information.
700 # @param BaseName The full file path of image.
701 # @param Guid The GUID for image.
702 # @param Arch Arch of this image.
703 # @param OutputDir The output directory for image.
704 # @param DebugDir The debug directory for image.
705 # @param ImageClass PeImage Information
707 def __init__(self
, BaseName
, Guid
, Arch
, OutputDir
, DebugDir
, ImageClass
):
708 self
.BaseName
= BaseName
711 self
.OutputDir
= OutputDir
712 self
.DebugDir
= DebugDir
713 self
.Image
= ImageClass
714 self
.Image
.Size
= (self
.Image
.Size
/ 0x1000 + 1) * 0x1000
716 ## The class implementing the EDK2 build process
718 # The build process includes:
719 # 1. Load configuration from target.txt and tools_def.txt in $(WORKSPACE)/Conf
720 # 2. Parse DSC file of active platform
721 # 3. Parse FDF file if any
722 # 4. Establish build database, including parse all other files (module, package)
723 # 5. Create AutoGen files (C code file, depex file, makefile) if necessary
724 # 6. Call build command
729 # Constructor will load all necessary configurations, parse platform, modules
730 # and packages and the establish a database for AutoGen.
732 # @param Target The build command target, one of gSupportedTarget
733 # @param WorkspaceDir The directory of workspace
734 # @param BuildOptions Build options passed from command line
736 def __init__(self
, Target
, WorkspaceDir
, BuildOptions
):
737 self
.WorkspaceDir
= WorkspaceDir
739 self
.PlatformFile
= BuildOptions
.PlatformFile
740 self
.ModuleFile
= BuildOptions
.ModuleFile
741 self
.ArchList
= BuildOptions
.TargetArch
742 self
.ToolChainList
= BuildOptions
.ToolChain
743 self
.BuildTargetList
= BuildOptions
.BuildTarget
744 self
.Fdf
= BuildOptions
.FdfFile
745 self
.FdList
= BuildOptions
.RomImage
746 self
.FvList
= BuildOptions
.FvImage
747 self
.CapList
= BuildOptions
.CapName
748 self
.SilentMode
= BuildOptions
.SilentMode
749 self
.ThreadNumber
= BuildOptions
.ThreadNumber
750 self
.SkipAutoGen
= BuildOptions
.SkipAutoGen
751 self
.Reparse
= BuildOptions
.Reparse
752 self
.SkuId
= BuildOptions
.SkuId
753 self
.ConfDirectory
= BuildOptions
.ConfDirectory
754 self
.SpawnMode
= True
755 self
.BuildReport
= BuildReport(BuildOptions
.ReportFile
, BuildOptions
.ReportType
)
756 self
.TargetTxt
= TargetTxtClassObject()
757 self
.ToolDef
= ToolDefClassObject()
758 GlobalData
.BuildOptionPcd
= BuildOptions
.OptionPcd
759 #Set global flag for build mode
760 GlobalData
.gIgnoreSource
= BuildOptions
.IgnoreSources
762 if self
.ConfDirectory
:
763 # Get alternate Conf location, if it is absolute, then just use the absolute directory name
764 ConfDirectoryPath
= os
.path
.normpath(self
.ConfDirectory
)
766 if not os
.path
.isabs(ConfDirectoryPath
):
767 # Since alternate directory name is not absolute, the alternate directory is located within the WORKSPACE
768 # This also handles someone specifying the Conf directory in the workspace. Using --conf=Conf
769 ConfDirectoryPath
= mws
.join(self
.WorkspaceDir
, ConfDirectoryPath
)
771 # Get standard WORKSPACE/Conf use the absolute path to the WORKSPACE/Conf
772 ConfDirectoryPath
= mws
.join(self
.WorkspaceDir
, 'Conf')
773 GlobalData
.gConfDirectory
= ConfDirectoryPath
774 GlobalData
.gDatabasePath
= os
.path
.normpath(os
.path
.join(ConfDirectoryPath
, GlobalData
.gDatabasePath
))
776 if BuildOptions
.DisableCache
:
777 self
.Db
= WorkspaceDatabase(":memory:")
779 self
.Db
= WorkspaceDatabase(GlobalData
.gDatabasePath
, self
.Reparse
)
780 self
.BuildDatabase
= self
.Db
.BuildObject
782 self
.LoadFixAddress
= 0
783 self
.UniFlag
= BuildOptions
.Flag
784 self
.BuildModules
= []
786 if BuildOptions
.CommandLength
:
787 GlobalData
.gCommandMaxLength
= BuildOptions
.CommandLength
789 # print dot character during doing some time-consuming work
790 self
.Progress
= Utils
.Progressor()
794 # print current build environment and configuration
795 EdkLogger
.quiet("%-16s = %s" % ("WORKSPACE", os
.environ
["WORKSPACE"]))
796 if "PACKAGES_PATH" in os
.environ
:
797 # WORKSPACE env has been converted before. Print the same path style with WORKSPACE env.
798 EdkLogger
.quiet("%-16s = %s" % ("PACKAGES_PATH", os
.path
.normcase(os
.path
.normpath(os
.environ
["PACKAGES_PATH"]))))
799 EdkLogger
.quiet("%-16s = %s" % ("ECP_SOURCE", os
.environ
["ECP_SOURCE"]))
800 EdkLogger
.quiet("%-16s = %s" % ("EDK_SOURCE", os
.environ
["EDK_SOURCE"]))
801 EdkLogger
.quiet("%-16s = %s" % ("EFI_SOURCE", os
.environ
["EFI_SOURCE"]))
802 EdkLogger
.quiet("%-16s = %s" % ("EDK_TOOLS_PATH", os
.environ
["EDK_TOOLS_PATH"]))
803 if "EDK_TOOLS_BIN" in os
.environ
:
804 # Print the same path style with WORKSPACE env.
805 EdkLogger
.quiet("%-16s = %s" % ("EDK_TOOLS_BIN", os
.path
.normcase(os
.path
.normpath(os
.environ
["EDK_TOOLS_BIN"]))))
809 os
.chdir(self
.WorkspaceDir
)
811 ## Load configuration
813 # This method will parse target.txt and get the build configurations.
815 def LoadConfiguration(self
):
817 # Check target.txt and tools_def.txt and Init them
819 BuildConfigurationFile
= os
.path
.normpath(os
.path
.join(GlobalData
.gConfDirectory
, gBuildConfiguration
))
820 if os
.path
.isfile(BuildConfigurationFile
) == True:
821 StatusCode
= self
.TargetTxt
.LoadTargetTxtFile(BuildConfigurationFile
)
823 ToolDefinitionFile
= self
.TargetTxt
.TargetTxtDictionary
[DataType
.TAB_TAT_DEFINES_TOOL_CHAIN_CONF
]
824 if ToolDefinitionFile
== '':
825 ToolDefinitionFile
= gToolsDefinition
826 ToolDefinitionFile
= os
.path
.normpath(mws
.join(self
.WorkspaceDir
, 'Conf', ToolDefinitionFile
))
827 if os
.path
.isfile(ToolDefinitionFile
) == True:
828 StatusCode
= self
.ToolDef
.LoadToolDefFile(ToolDefinitionFile
)
830 EdkLogger
.error("build", FILE_NOT_FOUND
, ExtraData
=ToolDefinitionFile
)
832 EdkLogger
.error("build", FILE_NOT_FOUND
, ExtraData
=BuildConfigurationFile
)
834 # if no ARCH given in command line, get it from target.txt
835 if not self
.ArchList
:
836 self
.ArchList
= self
.TargetTxt
.TargetTxtDictionary
[DataType
.TAB_TAT_DEFINES_TARGET_ARCH
]
837 self
.ArchList
= tuple(self
.ArchList
)
839 # if no build target given in command line, get it from target.txt
840 if not self
.BuildTargetList
:
841 self
.BuildTargetList
= self
.TargetTxt
.TargetTxtDictionary
[DataType
.TAB_TAT_DEFINES_TARGET
]
843 # if no tool chain given in command line, get it from target.txt
844 if not self
.ToolChainList
:
845 self
.ToolChainList
= self
.TargetTxt
.TargetTxtDictionary
[DataType
.TAB_TAT_DEFINES_TOOL_CHAIN_TAG
]
846 if self
.ToolChainList
== None or len(self
.ToolChainList
) == 0:
847 EdkLogger
.error("build", RESOURCE_NOT_AVAILABLE
, ExtraData
="No toolchain given. Don't know how to build.\n")
849 # check if the tool chains are defined or not
850 NewToolChainList
= []
851 for ToolChain
in self
.ToolChainList
:
852 if ToolChain
not in self
.ToolDef
.ToolsDefTxtDatabase
[TAB_TOD_DEFINES_TOOL_CHAIN_TAG
]:
853 EdkLogger
.warn("build", "Tool chain [%s] is not defined" % ToolChain
)
855 NewToolChainList
.append(ToolChain
)
856 # if no tool chain available, break the build
857 if len(NewToolChainList
) == 0:
858 EdkLogger
.error("build", RESOURCE_NOT_AVAILABLE
,
859 ExtraData
="[%s] not defined. No toolchain available for build!\n" % ", ".join(self
.ToolChainList
))
861 self
.ToolChainList
= NewToolChainList
863 if self
.ThreadNumber
== None:
864 self
.ThreadNumber
= self
.TargetTxt
.TargetTxtDictionary
[DataType
.TAB_TAT_DEFINES_MAX_CONCURRENT_THREAD_NUMBER
]
865 if self
.ThreadNumber
== '':
866 self
.ThreadNumber
= 0
868 self
.ThreadNumber
= int(self
.ThreadNumber
, 0)
870 if self
.ThreadNumber
== 0:
871 self
.ThreadNumber
= 1
873 if not self
.PlatformFile
:
874 PlatformFile
= self
.TargetTxt
.TargetTxtDictionary
[DataType
.TAB_TAT_DEFINES_ACTIVE_PLATFORM
]
876 # Try to find one in current directory
877 WorkingDirectory
= os
.getcwd()
878 FileList
= glob
.glob(os
.path
.normpath(os
.path
.join(WorkingDirectory
, '*.dsc')))
879 FileNum
= len(FileList
)
881 EdkLogger
.error("build", OPTION_MISSING
,
882 ExtraData
="There are %d DSC files in %s. Use '-p' to specify one.\n" % (FileNum
, WorkingDirectory
))
884 PlatformFile
= FileList
[0]
886 EdkLogger
.error("build", RESOURCE_NOT_AVAILABLE
,
887 ExtraData
="No active platform specified in target.txt or command line! Nothing can be built.\n")
889 self
.PlatformFile
= PathClass(NormFile(PlatformFile
, self
.WorkspaceDir
), self
.WorkspaceDir
)
891 ## Initialize build configuration
893 # This method will parse DSC file and merge the configurations from
894 # command line and target.txt, then get the final build configurations.
897 # parse target.txt, tools_def.txt, and platform file
898 self
.LoadConfiguration()
900 # Allow case-insensitive for those from command line or configuration file
901 ErrorCode
, ErrorInfo
= self
.PlatformFile
.Validate(".dsc", False)
903 EdkLogger
.error("build", ErrorCode
, ExtraData
=ErrorInfo
)
905 # create metafile database
906 self
.Db
.InitDatabase()
908 ## Build a module or platform
910 # Create autogen code and makefile for a module or platform, and the launch
911 # "make" command to build it
913 # @param Target The target of build command
914 # @param Platform The platform file
915 # @param Module The module file
916 # @param BuildTarget The name of build target, one of "DEBUG", "RELEASE"
917 # @param ToolChain The name of toolchain to build
918 # @param Arch The arch of the module/platform
919 # @param CreateDepModuleCodeFile Flag used to indicate creating code
920 # for dependent modules/Libraries
921 # @param CreateDepModuleMakeFile Flag used to indicate creating makefile
922 # for dependent modules/Libraries
924 def _BuildPa(self
, Target
, AutoGenObject
, CreateDepsCodeFile
=True, CreateDepsMakeFile
=True, BuildModule
=False):
925 if AutoGenObject
== None:
928 # skip file generation for cleanxxx targets, run and fds target
929 if Target
not in ['clean', 'cleanlib', 'cleanall', 'run', 'fds']:
930 # for target which must generate AutoGen code and makefile
931 if not self
.SkipAutoGen
or Target
== 'genc':
932 self
.Progress
.Start("Generating code")
933 AutoGenObject
.CreateCodeFile(CreateDepsCodeFile
)
934 self
.Progress
.Stop("done!")
938 if not self
.SkipAutoGen
or Target
== 'genmake':
939 self
.Progress
.Start("Generating makefile")
940 AutoGenObject
.CreateMakeFile(CreateDepsMakeFile
)
941 self
.Progress
.Stop("done!")
942 if Target
== "genmake":
945 # always recreate top/platform makefile when clean, just in case of inconsistency
946 AutoGenObject
.CreateCodeFile(False)
947 AutoGenObject
.CreateMakeFile(False)
949 if EdkLogger
.GetLevel() == EdkLogger
.QUIET
:
950 EdkLogger
.quiet("Building ... %s" % repr(AutoGenObject
))
952 BuildCommand
= AutoGenObject
.BuildCommand
953 if BuildCommand
== None or len(BuildCommand
) == 0:
954 EdkLogger
.error("build", OPTION_MISSING
,
955 "No build command found for this module. "
956 "Please check your setting of %s_%s_%s_MAKE_PATH in Conf/tools_def.txt file." %
957 (AutoGenObject
.BuildTarget
, AutoGenObject
.ToolChain
, AutoGenObject
.Arch
),
958 ExtraData
=str(AutoGenObject
))
960 makefile
= GenMake
.BuildFile(AutoGenObject
)._FILE
_NAME
_[GenMake
.gMakeType
]
964 RunDir
= os
.path
.normpath(os
.path
.join(AutoGenObject
.BuildDir
, GlobalData
.gGlobalDefines
['ARCH']))
965 Command
= '.\SecMain'
967 LaunchCommand(Command
, RunDir
)
972 BuildCommand
= BuildCommand
+ [Target
]
973 LaunchCommand(BuildCommand
, AutoGenObject
.MakeFileDir
)
974 self
.CreateAsBuiltInf()
978 if Target
== 'libraries':
979 for Lib
in AutoGenObject
.LibraryBuildDirectoryList
:
980 NewBuildCommand
= BuildCommand
+ ['-f', os
.path
.normpath(os
.path
.join(Lib
, makefile
)), 'pbuild']
981 LaunchCommand(NewBuildCommand
, AutoGenObject
.MakeFileDir
)
985 if Target
== 'modules':
986 for Lib
in AutoGenObject
.LibraryBuildDirectoryList
:
987 NewBuildCommand
= BuildCommand
+ ['-f', os
.path
.normpath(os
.path
.join(Lib
, makefile
)), 'pbuild']
988 LaunchCommand(NewBuildCommand
, AutoGenObject
.MakeFileDir
)
989 for Mod
in AutoGenObject
.ModuleBuildDirectoryList
:
990 NewBuildCommand
= BuildCommand
+ ['-f', os
.path
.normpath(os
.path
.join(Mod
, makefile
)), 'pbuild']
991 LaunchCommand(NewBuildCommand
, AutoGenObject
.MakeFileDir
)
992 self
.CreateAsBuiltInf()
996 if Target
== 'cleanlib':
997 for Lib
in AutoGenObject
.LibraryBuildDirectoryList
:
998 LibMakefile
= os
.path
.normpath(os
.path
.join(Lib
, makefile
))
999 if os
.path
.exists(LibMakefile
):
1000 NewBuildCommand
= BuildCommand
+ ['-f', LibMakefile
, 'cleanall']
1001 LaunchCommand(NewBuildCommand
, AutoGenObject
.MakeFileDir
)
1005 if Target
== 'clean':
1006 for Mod
in AutoGenObject
.ModuleBuildDirectoryList
:
1007 ModMakefile
= os
.path
.normpath(os
.path
.join(Mod
, makefile
))
1008 if os
.path
.exists(ModMakefile
):
1009 NewBuildCommand
= BuildCommand
+ ['-f', ModMakefile
, 'cleanall']
1010 LaunchCommand(NewBuildCommand
, AutoGenObject
.MakeFileDir
)
1011 for Lib
in AutoGenObject
.LibraryBuildDirectoryList
:
1012 LibMakefile
= os
.path
.normpath(os
.path
.join(Lib
, makefile
))
1013 if os
.path
.exists(LibMakefile
):
1014 NewBuildCommand
= BuildCommand
+ ['-f', LibMakefile
, 'cleanall']
1015 LaunchCommand(NewBuildCommand
, AutoGenObject
.MakeFileDir
)
1019 if Target
== 'cleanall':
1021 #os.rmdir(AutoGenObject.BuildDir)
1022 RemoveDirectory(AutoGenObject
.BuildDir
, True)
1023 except WindowsError, X
:
1024 EdkLogger
.error("build", FILE_DELETE_FAILURE
, ExtraData
=str(X
))
1027 ## Build a module or platform
1029 # Create autogen code and makefile for a module or platform, and the launch
1030 # "make" command to build it
1032 # @param Target The target of build command
1033 # @param Platform The platform file
1034 # @param Module The module file
1035 # @param BuildTarget The name of build target, one of "DEBUG", "RELEASE"
1036 # @param ToolChain The name of toolchain to build
1037 # @param Arch The arch of the module/platform
1038 # @param CreateDepModuleCodeFile Flag used to indicate creating code
1039 # for dependent modules/Libraries
1040 # @param CreateDepModuleMakeFile Flag used to indicate creating makefile
1041 # for dependent modules/Libraries
1043 def _Build(self
, Target
, AutoGenObject
, CreateDepsCodeFile
=True, CreateDepsMakeFile
=True, BuildModule
=False):
1044 if AutoGenObject
== None:
1047 # skip file generation for cleanxxx targets, run and fds target
1048 if Target
not in ['clean', 'cleanlib', 'cleanall', 'run', 'fds']:
1049 # for target which must generate AutoGen code and makefile
1050 if not self
.SkipAutoGen
or Target
== 'genc':
1051 self
.Progress
.Start("Generating code")
1052 AutoGenObject
.CreateCodeFile(CreateDepsCodeFile
)
1053 self
.Progress
.Stop("done!")
1054 if Target
== "genc":
1057 if not self
.SkipAutoGen
or Target
== 'genmake':
1058 self
.Progress
.Start("Generating makefile")
1059 AutoGenObject
.CreateMakeFile(CreateDepsMakeFile
)
1060 #AutoGenObject.CreateAsBuiltInf()
1061 self
.Progress
.Stop("done!")
1062 if Target
== "genmake":
1065 # always recreate top/platform makefile when clean, just in case of inconsistency
1066 AutoGenObject
.CreateCodeFile(False)
1067 AutoGenObject
.CreateMakeFile(False)
1069 if EdkLogger
.GetLevel() == EdkLogger
.QUIET
:
1070 EdkLogger
.quiet("Building ... %s" % repr(AutoGenObject
))
1072 BuildCommand
= AutoGenObject
.BuildCommand
1073 if BuildCommand
== None or len(BuildCommand
) == 0:
1074 EdkLogger
.error("build", OPTION_MISSING
,
1075 "No build command found for this module. "
1076 "Please check your setting of %s_%s_%s_MAKE_PATH in Conf/tools_def.txt file." %
1077 (AutoGenObject
.BuildTarget
, AutoGenObject
.ToolChain
, AutoGenObject
.Arch
),
1078 ExtraData
=str(AutoGenObject
))
1083 BuildCommand
= BuildCommand
+ [Target
]
1084 LaunchCommand(BuildCommand
, AutoGenObject
.MakeFileDir
)
1085 self
.CreateAsBuiltInf()
1090 LaunchCommand(AutoGenObject
.GenFdsCommand
, AutoGenObject
.MakeFileDir
)
1095 RunDir
= os
.path
.normpath(os
.path
.join(AutoGenObject
.BuildDir
, GlobalData
.gGlobalDefines
['ARCH']))
1096 Command
= '.\SecMain'
1098 LaunchCommand(Command
, RunDir
)
1102 if Target
== 'libraries':
1109 if Target
== 'cleanall':
1111 #os.rmdir(AutoGenObject.BuildDir)
1112 RemoveDirectory(AutoGenObject
.BuildDir
, True)
1113 except WindowsError, X
:
1114 EdkLogger
.error("build", FILE_DELETE_FAILURE
, ExtraData
=str(X
))
1117 ## Rebase module image and Get function address for the input module list.
1119 def _RebaseModule (self
, MapBuffer
, BaseAddress
, ModuleList
, AddrIsOffset
= True, ModeIsSmm
= False):
1121 AddrIsOffset
= False
1122 InfFileNameList
= ModuleList
.keys()
1123 #InfFileNameList.sort()
1124 for InfFile
in InfFileNameList
:
1125 sys
.stdout
.write (".")
1127 ModuleInfo
= ModuleList
[InfFile
]
1128 ModuleName
= ModuleInfo
.BaseName
1129 ModuleOutputImage
= ModuleInfo
.Image
.FileName
1130 ModuleDebugImage
= os
.path
.join(ModuleInfo
.DebugDir
, ModuleInfo
.BaseName
+ '.efi')
1131 ## for SMM module in SMRAM, the SMRAM will be allocated from base to top.
1133 BaseAddress
= BaseAddress
- ModuleInfo
.Image
.Size
1135 # Update Image to new BaseAddress by GenFw tool
1137 LaunchCommand(["GenFw", "--rebase", str(BaseAddress
), "-r", ModuleOutputImage
], ModuleInfo
.OutputDir
)
1138 LaunchCommand(["GenFw", "--rebase", str(BaseAddress
), "-r", ModuleDebugImage
], ModuleInfo
.DebugDir
)
1141 # Set new address to the section header only for SMM driver.
1143 LaunchCommand(["GenFw", "--address", str(BaseAddress
), "-r", ModuleOutputImage
], ModuleInfo
.OutputDir
)
1144 LaunchCommand(["GenFw", "--address", str(BaseAddress
), "-r", ModuleDebugImage
], ModuleInfo
.DebugDir
)
1146 # Collect funtion address from Map file
1148 ImageMapTable
= ModuleOutputImage
.replace('.efi', '.map')
1150 if os
.path
.exists(ImageMapTable
):
1151 OrigImageBaseAddress
= 0
1152 ImageMap
= open(ImageMapTable
, 'r')
1153 for LinStr
in ImageMap
:
1154 if len (LinStr
.strip()) == 0:
1157 # Get the preferred address set on link time.
1159 if LinStr
.find ('Preferred load address is') != -1:
1160 StrList
= LinStr
.split()
1161 OrigImageBaseAddress
= int (StrList
[len(StrList
) - 1], 16)
1163 StrList
= LinStr
.split()
1164 if len (StrList
) > 4:
1165 if StrList
[3] == 'f' or StrList
[3] == 'F':
1167 RelativeAddress
= int (StrList
[2], 16) - OrigImageBaseAddress
1168 FunctionList
.append ((Name
, RelativeAddress
))
1169 if ModuleInfo
.Arch
== 'IPF' and Name
.endswith('_ModuleEntryPoint'):
1171 # Get the real entry point address for IPF image.
1173 ModuleInfo
.Image
.EntryPoint
= RelativeAddress
1176 # Add general information.
1179 MapBuffer
.write('\n\n%s (Fixed SMRAM Offset, BaseAddress=0x%010X, EntryPoint=0x%010X)\n' % (ModuleName
, BaseAddress
, BaseAddress
+ ModuleInfo
.Image
.EntryPoint
))
1181 MapBuffer
.write('\n\n%s (Fixed Memory Offset, BaseAddress=-0x%010X, EntryPoint=-0x%010X)\n' % (ModuleName
, 0 - BaseAddress
, 0 - (BaseAddress
+ ModuleInfo
.Image
.EntryPoint
)))
1183 MapBuffer
.write('\n\n%s (Fixed Memory Address, BaseAddress=0x%010X, EntryPoint=0x%010X)\n' % (ModuleName
, BaseAddress
, BaseAddress
+ ModuleInfo
.Image
.EntryPoint
))
1185 # Add guid and general seciton section.
1187 TextSectionAddress
= 0
1188 DataSectionAddress
= 0
1189 for SectionHeader
in ModuleInfo
.Image
.SectionHeaderList
:
1190 if SectionHeader
[0] == '.text':
1191 TextSectionAddress
= SectionHeader
[1]
1192 elif SectionHeader
[0] in ['.data', '.sdata']:
1193 DataSectionAddress
= SectionHeader
[1]
1195 MapBuffer
.write('(GUID=%s, .textbaseaddress=-0x%010X, .databaseaddress=-0x%010X)\n' % (ModuleInfo
.Guid
, 0 - (BaseAddress
+ TextSectionAddress
), 0 - (BaseAddress
+ DataSectionAddress
)))
1197 MapBuffer
.write('(GUID=%s, .textbaseaddress=0x%010X, .databaseaddress=0x%010X)\n' % (ModuleInfo
.Guid
, BaseAddress
+ TextSectionAddress
, BaseAddress
+ DataSectionAddress
))
1199 # Add debug image full path.
1201 MapBuffer
.write('(IMAGE=%s)\n\n' % (ModuleDebugImage
))
1203 # Add funtion address
1205 for Function
in FunctionList
:
1207 MapBuffer
.write(' -0x%010X %s\n' % (0 - (BaseAddress
+ Function
[1]), Function
[0]))
1209 MapBuffer
.write(' 0x%010X %s\n' % (BaseAddress
+ Function
[1], Function
[0]))
1213 # for SMM module in SMRAM, the SMRAM will be allocated from base to top.
1216 BaseAddress
= BaseAddress
+ ModuleInfo
.Image
.Size
1218 ## Collect MAP information of all FVs
1220 def _CollectFvMapBuffer (self
, MapBuffer
, Wa
, ModuleList
):
1222 # First get the XIP base address for FV map file.
1223 GuidPattern
= re
.compile("[-a-fA-F0-9]+")
1224 GuidName
= re
.compile("\(GUID=[-a-fA-F0-9]+")
1225 for FvName
in Wa
.FdfProfile
.FvDict
.keys():
1226 FvMapBuffer
= os
.path
.join(Wa
.FvDir
, FvName
+ '.Fv.map')
1227 if not os
.path
.exists(FvMapBuffer
):
1229 FvMap
= open(FvMapBuffer
, 'r')
1230 #skip FV size information
1236 MatchGuid
= GuidPattern
.match(Line
)
1237 if MatchGuid
!= None:
1239 # Replace GUID with module name
1241 GuidString
= MatchGuid
.group()
1242 if GuidString
.upper() in ModuleList
:
1243 Line
= Line
.replace(GuidString
, ModuleList
[GuidString
.upper()].Name
)
1244 MapBuffer
.write('%s' % (Line
))
1246 # Add the debug image full path.
1248 MatchGuid
= GuidName
.match(Line
)
1249 if MatchGuid
!= None:
1250 GuidString
= MatchGuid
.group().split("=")[1]
1251 if GuidString
.upper() in ModuleList
:
1252 MapBuffer
.write('(IMAGE=%s)\n' % (os
.path
.join(ModuleList
[GuidString
.upper()].DebugDir
, ModuleList
[GuidString
.upper()].Name
+ '.efi')))
1256 ## Collect MAP information of all modules
1258 def _CollectModuleMapBuffer (self
, MapBuffer
, ModuleList
):
1259 sys
.stdout
.write ("Generate Load Module At Fix Address Map")
1261 PatchEfiImageList
= []
1269 # reserve 4K size in SMRAM to make SMM module address not from 0.
1271 IsIpfPlatform
= False
1272 if 'IPF' in self
.ArchList
:
1273 IsIpfPlatform
= True
1274 for ModuleGuid
in ModuleList
:
1275 Module
= ModuleList
[ModuleGuid
]
1276 GlobalData
.gProcessingFile
= "%s [%s, %s, %s]" % (Module
.MetaFile
, Module
.Arch
, Module
.ToolChain
, Module
.BuildTarget
)
1278 OutputImageFile
= ''
1279 for ResultFile
in Module
.CodaTargetList
:
1280 if str(ResultFile
.Target
).endswith('.efi'):
1282 # module list for PEI, DXE, RUNTIME and SMM
1284 OutputImageFile
= os
.path
.join(Module
.OutputDir
, Module
.Name
+ '.efi')
1285 ImageClass
= PeImageClass (OutputImageFile
)
1286 if not ImageClass
.IsValid
:
1287 EdkLogger
.error("build", FILE_PARSE_FAILURE
, ExtraData
=ImageClass
.ErrorInfo
)
1288 ImageInfo
= PeImageInfo(Module
.Name
, Module
.Guid
, Module
.Arch
, Module
.OutputDir
, Module
.DebugDir
, ImageClass
)
1289 if Module
.ModuleType
in ['PEI_CORE', 'PEIM', 'COMBINED_PEIM_DRIVER', 'PIC_PEIM', 'RELOCATABLE_PEIM', 'DXE_CORE']:
1290 PeiModuleList
[Module
.MetaFile
] = ImageInfo
1291 PeiSize
+= ImageInfo
.Image
.Size
1292 elif Module
.ModuleType
in ['BS_DRIVER', 'DXE_DRIVER', 'UEFI_DRIVER']:
1293 BtModuleList
[Module
.MetaFile
] = ImageInfo
1294 BtSize
+= ImageInfo
.Image
.Size
1295 elif Module
.ModuleType
in ['DXE_RUNTIME_DRIVER', 'RT_DRIVER', 'DXE_SAL_DRIVER', 'SAL_RT_DRIVER']:
1296 RtModuleList
[Module
.MetaFile
] = ImageInfo
1297 #IPF runtime driver needs to be at 2 page alignment.
1298 if IsIpfPlatform
and ImageInfo
.Image
.Size
% 0x2000 != 0:
1299 ImageInfo
.Image
.Size
= (ImageInfo
.Image
.Size
/ 0x2000 + 1) * 0x2000
1300 RtSize
+= ImageInfo
.Image
.Size
1301 elif Module
.ModuleType
in ['SMM_CORE', 'DXE_SMM_DRIVER']:
1302 SmmModuleList
[Module
.MetaFile
] = ImageInfo
1303 SmmSize
+= ImageInfo
.Image
.Size
1304 if Module
.ModuleType
== 'DXE_SMM_DRIVER':
1305 PiSpecVersion
= '0x00000000'
1306 if 'PI_SPECIFICATION_VERSION' in Module
.Module
.Specification
:
1307 PiSpecVersion
= Module
.Module
.Specification
['PI_SPECIFICATION_VERSION']
1308 # for PI specification < PI1.1, DXE_SMM_DRIVER also runs as BOOT time driver.
1309 if int(PiSpecVersion
, 16) < 0x0001000A:
1310 BtModuleList
[Module
.MetaFile
] = ImageInfo
1311 BtSize
+= ImageInfo
.Image
.Size
1314 # EFI image is final target.
1315 # Check EFI image contains patchable FixAddress related PCDs.
1317 if OutputImageFile
!= '':
1318 ModuleIsPatch
= False
1319 for Pcd
in Module
.ModulePcdList
:
1320 if Pcd
.Type
== TAB_PCDS_PATCHABLE_IN_MODULE
and Pcd
.TokenCName
in TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_LIST
:
1321 ModuleIsPatch
= True
1323 if not ModuleIsPatch
:
1324 for Pcd
in Module
.LibraryPcdList
:
1325 if Pcd
.Type
== TAB_PCDS_PATCHABLE_IN_MODULE
and Pcd
.TokenCName
in TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_LIST
:
1326 ModuleIsPatch
= True
1329 if not ModuleIsPatch
:
1332 # Module includes the patchable load fix address PCDs.
1333 # It will be fixed up later.
1335 PatchEfiImageList
.append (OutputImageFile
)
1338 # Get Top Memory address
1340 ReservedRuntimeMemorySize
= 0
1341 TopMemoryAddress
= 0
1342 if self
.LoadFixAddress
== 0xFFFFFFFFFFFFFFFF:
1343 TopMemoryAddress
= 0
1345 TopMemoryAddress
= self
.LoadFixAddress
1346 if TopMemoryAddress
< RtSize
+ BtSize
+ PeiSize
:
1347 EdkLogger
.error("build", PARAMETER_INVALID
, "FIX_LOAD_TOP_MEMORY_ADDRESS is too low to load driver")
1348 # Make IPF runtime driver at 2 page alignment.
1350 ReservedRuntimeMemorySize
= TopMemoryAddress
% 0x2000
1351 RtSize
= RtSize
+ ReservedRuntimeMemorySize
1354 # Patch FixAddress related PCDs into EFI image
1356 for EfiImage
in PatchEfiImageList
:
1357 EfiImageMap
= EfiImage
.replace('.efi', '.map')
1358 if not os
.path
.exists(EfiImageMap
):
1361 # Get PCD offset in EFI image by GenPatchPcdTable function
1363 PcdTable
= parsePcdInfoFromMapFile(EfiImageMap
, EfiImage
)
1365 # Patch real PCD value by PatchPcdValue tool
1367 for PcdInfo
in PcdTable
:
1369 if PcdInfo
[0] == TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_PEI_PAGE_SIZE
:
1370 ReturnValue
, ErrorInfo
= PatchBinaryFile (EfiImage
, PcdInfo
[1], TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_PEI_PAGE_SIZE_DATA_TYPE
, str (PeiSize
/ 0x1000))
1371 elif PcdInfo
[0] == TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_DXE_PAGE_SIZE
:
1372 ReturnValue
, ErrorInfo
= PatchBinaryFile (EfiImage
, PcdInfo
[1], TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_DXE_PAGE_SIZE_DATA_TYPE
, str (BtSize
/ 0x1000))
1373 elif PcdInfo
[0] == TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_RUNTIME_PAGE_SIZE
:
1374 ReturnValue
, ErrorInfo
= PatchBinaryFile (EfiImage
, PcdInfo
[1], TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_RUNTIME_PAGE_SIZE_DATA_TYPE
, str (RtSize
/ 0x1000))
1375 elif PcdInfo
[0] == TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_SMM_PAGE_SIZE
and len (SmmModuleList
) > 0:
1376 ReturnValue
, ErrorInfo
= PatchBinaryFile (EfiImage
, PcdInfo
[1], TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_SMM_PAGE_SIZE_DATA_TYPE
, str (SmmSize
/ 0x1000))
1377 if ReturnValue
!= 0:
1378 EdkLogger
.error("build", PARAMETER_INVALID
, "Patch PCD value failed", ExtraData
=ErrorInfo
)
1380 MapBuffer
.write('PEI_CODE_PAGE_NUMBER = 0x%x\n' % (PeiSize
/ 0x1000))
1381 MapBuffer
.write('BOOT_CODE_PAGE_NUMBER = 0x%x\n' % (BtSize
/ 0x1000))
1382 MapBuffer
.write('RUNTIME_CODE_PAGE_NUMBER = 0x%x\n' % (RtSize
/ 0x1000))
1383 if len (SmmModuleList
) > 0:
1384 MapBuffer
.write('SMM_CODE_PAGE_NUMBER = 0x%x\n' % (SmmSize
/ 0x1000))
1386 PeiBaseAddr
= TopMemoryAddress
- RtSize
- BtSize
1387 BtBaseAddr
= TopMemoryAddress
- RtSize
1388 RtBaseAddr
= TopMemoryAddress
- ReservedRuntimeMemorySize
1390 self
._RebaseModule
(MapBuffer
, PeiBaseAddr
, PeiModuleList
, TopMemoryAddress
== 0)
1391 self
._RebaseModule
(MapBuffer
, BtBaseAddr
, BtModuleList
, TopMemoryAddress
== 0)
1392 self
._RebaseModule
(MapBuffer
, RtBaseAddr
, RtModuleList
, TopMemoryAddress
== 0)
1393 self
._RebaseModule
(MapBuffer
, 0x1000, SmmModuleList
, AddrIsOffset
=False, ModeIsSmm
=True)
1394 MapBuffer
.write('\n\n')
1395 sys
.stdout
.write ("\n")
1398 ## Save platform Map file
1400 def _SaveMapFile (self
, MapBuffer
, Wa
):
1402 # Map file path is got.
1404 MapFilePath
= os
.path
.join(Wa
.BuildDir
, Wa
.Name
+ '.map')
1406 # Save address map into MAP file.
1408 SaveFileOnChange(MapFilePath
, MapBuffer
.getvalue(), False)
1410 if self
.LoadFixAddress
!= 0:
1411 sys
.stdout
.write ("\nLoad Module At Fix Address Map file can be found at %s\n" % (MapFilePath
))
1414 ## Build active platform for different build targets and different tool chains
1416 def _BuildPlatform(self
):
1417 for BuildTarget
in self
.BuildTargetList
:
1418 GlobalData
.gGlobalDefines
['TARGET'] = BuildTarget
1419 for ToolChain
in self
.ToolChainList
:
1420 GlobalData
.gGlobalDefines
['TOOLCHAIN'] = ToolChain
1421 GlobalData
.gGlobalDefines
['TOOL_CHAIN_TAG'] = ToolChain
1422 Wa
= WorkspaceAutoGen(
1439 self
.Fdf
= Wa
.FdfFile
1440 self
.LoadFixAddress
= Wa
.Platform
.LoadFixAddress
1441 self
.BuildReport
.AddPlatformReport(Wa
)
1442 self
.Progress
.Stop("done!")
1443 for Arch
in Wa
.ArchList
:
1444 GlobalData
.gGlobalDefines
['ARCH'] = Arch
1445 Pa
= PlatformAutoGen(Wa
, self
.PlatformFile
, BuildTarget
, ToolChain
, Arch
)
1446 for Module
in Pa
.Platform
.Modules
:
1447 # Get ModuleAutoGen object to generate C code file and makefile
1448 Ma
= ModuleAutoGen(Wa
, Module
, BuildTarget
, ToolChain
, Arch
, self
.PlatformFile
)
1451 self
.BuildModules
.append(Ma
)
1452 self
._BuildPa
(self
.Target
, Pa
)
1454 # Create MAP file when Load Fix Address is enabled.
1455 if self
.Target
in ["", "all", "fds"]:
1456 for Arch
in Wa
.ArchList
:
1457 GlobalData
.gGlobalDefines
['ARCH'] = Arch
1459 # Check whether the set fix address is above 4G for 32bit image.
1461 if (Arch
== 'IA32' or Arch
== 'ARM') and self
.LoadFixAddress
!= 0xFFFFFFFFFFFFFFFF and self
.LoadFixAddress
>= 0x100000000:
1462 EdkLogger
.error("build", PARAMETER_INVALID
, "FIX_LOAD_TOP_MEMORY_ADDRESS can't be set to larger than or equal to 4G for the platform with IA32 or ARM arch modules")
1467 for Pa
in Wa
.AutoGenObjectList
:
1468 for Ma
in Pa
.ModuleAutoGenList
:
1471 if not Ma
.IsLibrary
:
1472 ModuleList
[Ma
.Guid
.upper()] = Ma
1474 MapBuffer
= StringIO('')
1475 if self
.LoadFixAddress
!= 0:
1477 # Rebase module to the preferred memory address before GenFds
1479 self
._CollectModuleMapBuffer
(MapBuffer
, ModuleList
)
1482 # create FDS again for the updated EFI image
1484 self
._Build
("fds", Wa
)
1486 # Create MAP file for all platform FVs after GenFds.
1488 self
._CollectFvMapBuffer
(MapBuffer
, Wa
, ModuleList
)
1490 # Save MAP buffer into MAP file.
1492 self
._SaveMapFile
(MapBuffer
, Wa
)
1494 ## Build active module for different build targets, different tool chains and different archs
1496 def _BuildModule(self
):
1497 for BuildTarget
in self
.BuildTargetList
:
1498 GlobalData
.gGlobalDefines
['TARGET'] = BuildTarget
1499 for ToolChain
in self
.ToolChainList
:
1500 GlobalData
.gGlobalDefines
['TOOLCHAIN'] = ToolChain
1501 GlobalData
.gGlobalDefines
['TOOL_CHAIN_TAG'] = ToolChain
1503 # module build needs platform build information, so get platform
1506 Wa
= WorkspaceAutoGen(
1524 self
.Fdf
= Wa
.FdfFile
1525 self
.LoadFixAddress
= Wa
.Platform
.LoadFixAddress
1526 Wa
.CreateMakeFile(False)
1527 self
.Progress
.Stop("done!")
1529 for Arch
in Wa
.ArchList
:
1530 GlobalData
.gGlobalDefines
['ARCH'] = Arch
1531 Ma
= ModuleAutoGen(Wa
, self
.ModuleFile
, BuildTarget
, ToolChain
, Arch
, self
.PlatformFile
)
1532 if Ma
== None: continue
1534 self
.BuildModules
.append(Ma
)
1535 if not Ma
.IsBinaryModule
:
1536 self
._Build
(self
.Target
, Ma
, BuildModule
=True)
1538 self
.BuildReport
.AddPlatformReport(Wa
, MaList
)
1543 "Module for [%s] is not a component of active platform."\
1544 " Please make sure that the ARCH and inf file path are"\
1545 " given in the same as in [%s]" % \
1546 (', '.join(Wa
.ArchList
), self
.PlatformFile
),
1547 ExtraData
=self
.ModuleFile
1549 # Create MAP file when Load Fix Address is enabled.
1550 if self
.Target
== "fds" and self
.Fdf
:
1551 for Arch
in Wa
.ArchList
:
1553 # Check whether the set fix address is above 4G for 32bit image.
1555 if (Arch
== 'IA32' or Arch
== 'ARM') and self
.LoadFixAddress
!= 0xFFFFFFFFFFFFFFFF and self
.LoadFixAddress
>= 0x100000000:
1556 EdkLogger
.error("build", PARAMETER_INVALID
, "FIX_LOAD_TOP_MEMORY_ADDRESS can't be set to larger than or equal to 4G for the platorm with IA32 or ARM arch modules")
1561 for Pa
in Wa
.AutoGenObjectList
:
1562 for Ma
in Pa
.ModuleAutoGenList
:
1565 if not Ma
.IsLibrary
:
1566 ModuleList
[Ma
.Guid
.upper()] = Ma
1568 MapBuffer
= StringIO('')
1569 if self
.LoadFixAddress
!= 0:
1571 # Rebase module to the preferred memory address before GenFds
1573 self
._CollectModuleMapBuffer
(MapBuffer
, ModuleList
)
1575 # create FDS again for the updated EFI image
1577 self
._Build
("fds", Wa
)
1579 # Create MAP file for all platform FVs after GenFds.
1581 self
._CollectFvMapBuffer
(MapBuffer
, Wa
, ModuleList
)
1583 # Save MAP buffer into MAP file.
1585 self
._SaveMapFile
(MapBuffer
, Wa
)
1587 ## Build a platform in multi-thread mode
1589 def _MultiThreadBuildPlatform(self
):
1590 for BuildTarget
in self
.BuildTargetList
:
1591 GlobalData
.gGlobalDefines
['TARGET'] = BuildTarget
1592 for ToolChain
in self
.ToolChainList
:
1593 GlobalData
.gGlobalDefines
['TOOLCHAIN'] = ToolChain
1594 GlobalData
.gGlobalDefines
['TOOL_CHAIN_TAG'] = ToolChain
1595 Wa
= WorkspaceAutoGen(
1612 self
.Fdf
= Wa
.FdfFile
1613 self
.LoadFixAddress
= Wa
.Platform
.LoadFixAddress
1614 self
.BuildReport
.AddPlatformReport(Wa
)
1615 Wa
.CreateMakeFile(False)
1617 # multi-thread exit flag
1618 ExitFlag
= threading
.Event()
1620 for Arch
in Wa
.ArchList
:
1621 GlobalData
.gGlobalDefines
['ARCH'] = Arch
1622 Pa
= PlatformAutoGen(Wa
, self
.PlatformFile
, BuildTarget
, ToolChain
, Arch
)
1626 for Inf
in Pa
.Platform
.Modules
:
1627 ModuleList
.append(Inf
)
1628 # Add the INF only list in FDF
1629 if GlobalData
.gFdfParser
!= None:
1630 for InfName
in GlobalData
.gFdfParser
.Profile
.InfList
:
1631 Inf
= PathClass(NormPath(InfName
), self
.WorkspaceDir
, Arch
)
1632 if Inf
in Pa
.Platform
.Modules
:
1634 ModuleList
.append(Inf
)
1635 for Module
in ModuleList
:
1636 # Get ModuleAutoGen object to generate C code file and makefile
1637 Ma
= ModuleAutoGen(Wa
, Module
, BuildTarget
, ToolChain
, Arch
, self
.PlatformFile
)
1641 # Not to auto-gen for targets 'clean', 'cleanlib', 'cleanall', 'run', 'fds'
1642 if self
.Target
not in ['clean', 'cleanlib', 'cleanall', 'run', 'fds']:
1643 # for target which must generate AutoGen code and makefile
1644 if not self
.SkipAutoGen
or self
.Target
== 'genc':
1645 Ma
.CreateCodeFile(True)
1646 if self
.Target
== "genc":
1649 if not self
.SkipAutoGen
or self
.Target
== 'genmake':
1650 Ma
.CreateMakeFile(True)
1651 if self
.Target
== "genmake":
1653 self
.BuildModules
.append(Ma
)
1654 self
.Progress
.Stop("done!")
1656 for Ma
in self
.BuildModules
:
1657 # Generate build task for the module
1658 if not Ma
.IsBinaryModule
:
1659 Bt
= BuildTask
.New(ModuleMakeUnit(Ma
, self
.Target
))
1660 # Break build if any build thread has error
1661 if BuildTask
.HasError():
1662 # we need a full version of makefile for platform
1664 BuildTask
.WaitForComplete()
1665 Pa
.CreateMakeFile(False)
1666 EdkLogger
.error("build", BUILD_ERROR
, "Failed to build module", ExtraData
=GlobalData
.gBuildingModule
)
1667 # Start task scheduler
1668 if not BuildTask
.IsOnGoing():
1669 BuildTask
.StartScheduler(self
.ThreadNumber
, ExitFlag
)
1671 # in case there's an interruption. we need a full version of makefile for platform
1672 Pa
.CreateMakeFile(False)
1673 if BuildTask
.HasError():
1674 EdkLogger
.error("build", BUILD_ERROR
, "Failed to build module", ExtraData
=GlobalData
.gBuildingModule
)
1677 # Save temp tables to a TmpTableDict.
1679 for Key
in Wa
.BuildDatabase
._CACHE
_:
1680 if Wa
.BuildDatabase
._CACHE
_[Key
]._RawData
and Wa
.BuildDatabase
._CACHE
_[Key
]._RawData
._Table
and Wa
.BuildDatabase
._CACHE
_[Key
]._RawData
._Table
.Table
:
1681 if TemporaryTablePattern
.match(Wa
.BuildDatabase
._CACHE
_[Key
]._RawData
._Table
.Table
):
1682 TmpTableDict
[Wa
.BuildDatabase
._CACHE
_[Key
]._RawData
._Table
.Table
] = Wa
.BuildDatabase
._CACHE
_[Key
]._RawData
._Table
.Cur
1685 # All modules have been put in build tasks queue. Tell task scheduler
1686 # to exit if all tasks are completed
1689 BuildTask
.WaitForComplete()
1690 self
.CreateAsBuiltInf()
1693 # Check for build error, and raise exception if one
1694 # has been signaled.
1696 if BuildTask
.HasError():
1697 EdkLogger
.error("build", BUILD_ERROR
, "Failed to build module", ExtraData
=GlobalData
.gBuildingModule
)
1699 # Create MAP file when Load Fix Address is enabled.
1700 if self
.Target
in ["", "all", "fds"]:
1701 for Arch
in Wa
.ArchList
:
1703 # Check whether the set fix address is above 4G for 32bit image.
1705 if (Arch
== 'IA32' or Arch
== 'ARM') and self
.LoadFixAddress
!= 0xFFFFFFFFFFFFFFFF and self
.LoadFixAddress
>= 0x100000000:
1706 EdkLogger
.error("build", PARAMETER_INVALID
, "FIX_LOAD_TOP_MEMORY_ADDRESS can't be set to larger than or equal to 4G for the platorm with IA32 or ARM arch modules")
1711 for Pa
in Wa
.AutoGenObjectList
:
1712 for Ma
in Pa
.ModuleAutoGenList
:
1715 if not Ma
.IsLibrary
:
1716 ModuleList
[Ma
.Guid
.upper()] = Ma
1718 # Rebase module to the preferred memory address before GenFds
1720 MapBuffer
= StringIO('')
1721 if self
.LoadFixAddress
!= 0:
1722 self
._CollectModuleMapBuffer
(MapBuffer
, ModuleList
)
1726 # Generate FD image if there's a FDF file found
1728 LaunchCommand(Wa
.GenFdsCommand
, os
.getcwd())
1731 # Create MAP file for all platform FVs after GenFds.
1733 self
._CollectFvMapBuffer
(MapBuffer
, Wa
, ModuleList
)
1735 # Save MAP buffer into MAP file.
1737 self
._SaveMapFile
(MapBuffer
, Wa
)
1739 ## Generate GuidedSectionTools.txt in the FV directories.
1741 def CreateGuidedSectionToolsFile(self
):
1742 for BuildTarget
in self
.BuildTargetList
:
1743 for ToolChain
in self
.ToolChainList
:
1744 Wa
= WorkspaceAutoGen(
1761 if not os
.path
.exists(FvDir
):
1764 for Arch
in self
.ArchList
:
1765 # Build up the list of supported architectures for this build
1766 prefix
= '%s_%s_%s_' % (BuildTarget
, ToolChain
, Arch
)
1768 # Look through the tool definitions for GUIDed tools
1770 for (attrib
, value
) in self
.ToolDef
.ToolsDefTxtDictionary
.iteritems():
1771 if attrib
.upper().endswith('_GUID'):
1772 split
= attrib
.split('_')
1773 thisPrefix
= '_'.join(split
[0:3]) + '_'
1774 if thisPrefix
== prefix
:
1775 guid
= self
.ToolDef
.ToolsDefTxtDictionary
[attrib
]
1778 path
= '_'.join(split
[0:4]) + '_PATH'
1779 path
= self
.ToolDef
.ToolsDefTxtDictionary
[path
]
1780 path
= self
.GetFullPathOfTool(path
)
1781 guidAttribs
.append((guid
, toolName
, path
))
1783 # Write out GuidedSecTools.txt
1784 toolsFile
= os
.path
.join(FvDir
, 'GuidedSectionTools.txt')
1785 toolsFile
= open(toolsFile
, 'wt')
1786 for guidedSectionTool
in guidAttribs
:
1787 print >> toolsFile
, ' '.join(guidedSectionTool
)
1790 ## Returns the full path of the tool.
1792 def GetFullPathOfTool (self
, tool
):
1793 if os
.path
.exists(tool
):
1794 return os
.path
.realpath(tool
)
1796 # We need to search for the tool using the
1797 # PATH environment variable.
1798 for dirInPath
in os
.environ
['PATH'].split(os
.pathsep
):
1799 foundPath
= os
.path
.join(dirInPath
, tool
)
1800 if os
.path
.exists(foundPath
):
1801 return os
.path
.realpath(foundPath
)
1803 # If the tool was not found in the path then we just return
1807 ## Launch the module or platform build
1810 if not self
.ModuleFile
:
1811 if not self
.SpawnMode
or self
.Target
not in ["", "all"]:
1812 self
.SpawnMode
= False
1813 self
._BuildPlatform
()
1815 self
._MultiThreadBuildPlatform
()
1816 self
.CreateGuidedSectionToolsFile()
1818 self
.SpawnMode
= False
1821 if self
.Target
== 'cleanall':
1823 RemoveDirectory(os
.path
.dirname(GlobalData
.gDatabasePath
), True)
1825 def CreateAsBuiltInf(self
):
1826 for Module
in self
.BuildModules
:
1827 Module
.CreateAsBuiltInf()
1828 self
.BuildModules
= []
1829 ## Do some clean-up works when error occurred
1830 def Relinquish(self
):
1831 OldLogLevel
= EdkLogger
.GetLevel()
1832 EdkLogger
.SetLevel(EdkLogger
.ERROR
)
1833 #self.DumpBuildData()
1834 Utils
.Progressor
.Abort()
1835 if self
.SpawnMode
== True:
1837 EdkLogger
.SetLevel(OldLogLevel
)
1839 def DumpBuildData(self
):
1840 CacheDirectory
= os
.path
.dirname(GlobalData
.gDatabasePath
)
1841 Utils
.CreateDirectory(CacheDirectory
)
1842 Utils
.DataDump(Utils
.gFileTimeStampCache
, os
.path
.join(CacheDirectory
, "gFileTimeStampCache"))
1843 Utils
.DataDump(Utils
.gDependencyDatabase
, os
.path
.join(CacheDirectory
, "gDependencyDatabase"))
1845 def RestoreBuildData(self
):
1846 FilePath
= os
.path
.join(os
.path
.dirname(GlobalData
.gDatabasePath
), "gFileTimeStampCache")
1847 if Utils
.gFileTimeStampCache
== {} and os
.path
.isfile(FilePath
):
1848 Utils
.gFileTimeStampCache
= Utils
.DataRestore(FilePath
)
1849 if Utils
.gFileTimeStampCache
== None:
1850 Utils
.gFileTimeStampCache
= {}
1852 FilePath
= os
.path
.join(os
.path
.dirname(GlobalData
.gDatabasePath
), "gDependencyDatabase")
1853 if Utils
.gDependencyDatabase
== {} and os
.path
.isfile(FilePath
):
1854 Utils
.gDependencyDatabase
= Utils
.DataRestore(FilePath
)
1855 if Utils
.gDependencyDatabase
== None:
1856 Utils
.gDependencyDatabase
= {}
1858 def ParseDefines(DefineList
=[]):
1860 if DefineList
!= None:
1861 for Define
in DefineList
:
1862 DefineTokenList
= Define
.split("=", 1)
1863 if not GlobalData
.gMacroNamePattern
.match(DefineTokenList
[0]):
1864 EdkLogger
.error('build', FORMAT_INVALID
,
1865 "The macro name must be in the pattern [A-Z][A-Z0-9_]*",
1866 ExtraData
=DefineTokenList
[0])
1868 if len(DefineTokenList
) == 1:
1869 DefineDict
[DefineTokenList
[0]] = "TRUE"
1871 DefineDict
[DefineTokenList
[0]] = DefineTokenList
[1].strip()
1875 def SingleCheckCallback(option
, opt_str
, value
, parser
):
1876 if option
not in gParamCheck
:
1877 setattr(parser
.values
, option
.dest
, value
)
1878 gParamCheck
.append(option
)
1880 parser
.error("Option %s only allows one instance in command line!" % option
)
1882 ## Parse command line options
1884 # Using standard Python module optparse to parse command line option of this tool.
1886 # @retval Opt A optparse.Values object containing the parsed options
1887 # @retval Args Target of build command
1889 def MyOptionParser():
1890 Parser
= OptionParser(description
=__copyright__
, version
=__version__
, prog
="build.exe", usage
="%prog [options] [all|fds|genc|genmake|clean|cleanall|cleanlib|modules|libraries|run]")
1891 Parser
.add_option("-a", "--arch", action
="append", type="choice", choices
=['IA32', 'X64', 'IPF', 'EBC', 'ARM', 'AARCH64'], dest
="TargetArch",
1892 help="ARCHS is one of list: IA32, X64, IPF, ARM, AARCH64 or EBC, which overrides target.txt's TARGET_ARCH definition. To specify more archs, please repeat this option.")
1893 Parser
.add_option("-p", "--platform", action
="callback", type="string", dest
="PlatformFile", callback
=SingleCheckCallback
,
1894 help="Build the platform specified by the DSC file name argument, overriding target.txt's ACTIVE_PLATFORM definition.")
1895 Parser
.add_option("-m", "--module", action
="callback", type="string", dest
="ModuleFile", callback
=SingleCheckCallback
,
1896 help="Build the module specified by the INF file name argument.")
1897 Parser
.add_option("-b", "--buildtarget", type="string", dest
="BuildTarget", help="Using the TARGET to build the platform, overriding target.txt's TARGET definition.",
1899 Parser
.add_option("-t", "--tagname", action
="append", type="string", dest
="ToolChain",
1900 help="Using the Tool Chain Tagname to build the platform, overriding target.txt's TOOL_CHAIN_TAG definition.")
1901 Parser
.add_option("-x", "--sku-id", action
="callback", type="string", dest
="SkuId", callback
=SingleCheckCallback
,
1902 help="Using this name of SKU ID to build the platform, overriding SKUID_IDENTIFIER in DSC file.")
1904 Parser
.add_option("-n", action
="callback", type="int", dest
="ThreadNumber", callback
=SingleCheckCallback
,
1905 help="Build the platform using multi-threaded compiler. The value overrides target.txt's MAX_CONCURRENT_THREAD_NUMBER. Less than 2 will disable multi-thread builds.")
1907 Parser
.add_option("-f", "--fdf", action
="callback", type="string", dest
="FdfFile", callback
=SingleCheckCallback
,
1908 help="The name of the FDF file to use, which overrides the setting in the DSC file.")
1909 Parser
.add_option("-r", "--rom-image", action
="append", type="string", dest
="RomImage", default
=[],
1910 help="The name of FD to be generated. The name must be from [FD] section in FDF file.")
1911 Parser
.add_option("-i", "--fv-image", action
="append", type="string", dest
="FvImage", default
=[],
1912 help="The name of FV to be generated. The name must be from [FV] section in FDF file.")
1913 Parser
.add_option("-C", "--capsule-image", action
="append", type="string", dest
="CapName", default
=[],
1914 help="The name of Capsule to be generated. The name must be from [Capsule] section in FDF file.")
1915 Parser
.add_option("-u", "--skip-autogen", action
="store_true", dest
="SkipAutoGen", help="Skip AutoGen step.")
1916 Parser
.add_option("-e", "--re-parse", action
="store_true", dest
="Reparse", help="Re-parse all meta-data files.")
1918 Parser
.add_option("-c", "--case-insensitive", action
="store_true", dest
="CaseInsensitive", default
=False, help="Don't check case of file name.")
1920 Parser
.add_option("-w", "--warning-as-error", action
="store_true", dest
="WarningAsError", help="Treat warning in tools as error.")
1921 Parser
.add_option("-j", "--log", action
="store", dest
="LogFile", help="Put log in specified file as well as on console.")
1923 Parser
.add_option("-s", "--silent", action
="store_true", type=None, dest
="SilentMode",
1924 help="Make use of silent mode of (n)make.")
1925 Parser
.add_option("-q", "--quiet", action
="store_true", type=None, help="Disable all messages except FATAL ERRORS.")
1926 Parser
.add_option("-v", "--verbose", action
="store_true", type=None, help="Turn on verbose output with informational messages printed, "\
1927 "including library instances selected, final dependency expression, "\
1928 "and warning messages, etc.")
1929 Parser
.add_option("-d", "--debug", action
="store", type="int", help="Enable debug messages at specified level.")
1930 Parser
.add_option("-D", "--define", action
="append", type="string", dest
="Macros", help="Macro: \"Name [= Value]\".")
1932 Parser
.add_option("-y", "--report-file", action
="store", dest
="ReportFile", help="Create/overwrite the report to the specified filename.")
1933 Parser
.add_option("-Y", "--report-type", action
="append", type="choice", choices
=['PCD', 'LIBRARY', 'FLASH', 'DEPEX', 'BUILD_FLAGS', 'FIXED_ADDRESS', 'EXECUTION_ORDER'], dest
="ReportType", default
=[],
1934 help="Flags that control the type of build report to generate. Must be one of: [PCD, LIBRARY, FLASH, DEPEX, BUILD_FLAGS, FIXED_ADDRESS, EXECUTION_ORDER]. "\
1935 "To specify more than one flag, repeat this option on the command line and the default flag set is [PCD, LIBRARY, FLASH, DEPEX, BUILD_FLAGS, FIXED_ADDRESS]")
1936 Parser
.add_option("-F", "--flag", action
="store", type="string", dest
="Flag",
1937 help="Specify the specific option to parse EDK UNI file. Must be one of: [-c, -s]. -c is for EDK framework UNI file, and -s is for EDK UEFI UNI file. "\
1938 "This option can also be specified by setting *_*_*_BUILD_FLAGS in [BuildOptions] section of platform DSC. If they are both specified, this value "\
1939 "will override the setting in [BuildOptions] section of platform DSC.")
1940 Parser
.add_option("-N", "--no-cache", action
="store_true", dest
="DisableCache", default
=False, help="Disable build cache mechanism")
1941 Parser
.add_option("--conf", action
="store", type="string", dest
="ConfDirectory", help="Specify the customized Conf directory.")
1942 Parser
.add_option("--check-usage", action
="store_true", dest
="CheckUsage", default
=False, help="Check usage content of entries listed in INF file.")
1943 Parser
.add_option("--ignore-sources", action
="store_true", dest
="IgnoreSources", default
=False, help="Focus to a binary build and ignore all source files")
1944 Parser
.add_option("--pcd", action
="append", dest
="OptionPcd", help="Set PCD value by command line. Format: \"PcdName=Value\" ")
1945 Parser
.add_option("-l", "--cmd-len", action
="store", type="int", dest
="CommandLength", help="Specify the maximum line length of build command. Default is 4096.")
1947 (Opt
, Args
) = Parser
.parse_args()
1950 ## Tool entrance method
1952 # This method mainly dispatch specific methods per the command line options.
1953 # If no error found, return zero value so the caller of this tool can know
1954 # if it's executed successfully or not.
1956 # @retval 0 Tool was successful
1957 # @retval 1 Tool failed
1960 StartTime
= time
.time()
1962 # Initialize log system
1963 EdkLogger
.Initialize()
1966 # Parse the options and args
1968 (Option
, Target
) = MyOptionParser()
1969 GlobalData
.gOptions
= Option
1970 GlobalData
.gCaseInsensitive
= Option
.CaseInsensitive
1973 if Option
.verbose
!= None:
1974 EdkLogger
.SetLevel(EdkLogger
.VERBOSE
)
1975 elif Option
.quiet
!= None:
1976 EdkLogger
.SetLevel(EdkLogger
.QUIET
)
1977 elif Option
.debug
!= None:
1978 EdkLogger
.SetLevel(Option
.debug
+ 1)
1980 EdkLogger
.SetLevel(EdkLogger
.INFO
)
1982 if Option
.LogFile
!= None:
1983 EdkLogger
.SetLogFile(Option
.LogFile
)
1985 if Option
.WarningAsError
== True:
1986 EdkLogger
.SetWarningAsError()
1988 if platform
.platform().find("Windows") >= 0:
1989 GlobalData
.gIsWindows
= True
1991 GlobalData
.gIsWindows
= False
1993 EdkLogger
.quiet("Build environment: %s" % platform
.platform())
1994 EdkLogger
.quiet(time
.strftime("Build start time: %H:%M:%S, %b.%d %Y\n", time
.localtime()));
1999 if len(Target
) == 0:
2001 elif len(Target
) >= 2:
2002 EdkLogger
.error("build", OPTION_NOT_SUPPORTED
, "More than one targets are not supported.",
2003 ExtraData
="Please select one of: %s" % (' '.join(gSupportedTarget
)))
2005 Target
= Target
[0].lower()
2007 if Target
not in gSupportedTarget
:
2008 EdkLogger
.error("build", OPTION_NOT_SUPPORTED
, "Not supported target [%s]." % Target
,
2009 ExtraData
="Please select one of: %s" % (' '.join(gSupportedTarget
)))
2012 # Check environment variable: EDK_TOOLS_PATH, WORKSPACE, PATH
2015 GlobalData
.gCommandLineDefines
.update(ParseDefines(Option
.Macros
))
2017 Workspace
= os
.getenv("WORKSPACE")
2019 # Get files real name in workspace dir
2021 GlobalData
.gAllFiles
= Utils
.DirCache(Workspace
)
2023 WorkingDirectory
= os
.getcwd()
2024 if not Option
.ModuleFile
:
2025 FileList
= glob
.glob(os
.path
.normpath(os
.path
.join(WorkingDirectory
, '*.inf')))
2026 FileNum
= len(FileList
)
2028 EdkLogger
.error("build", OPTION_NOT_SUPPORTED
, "There are %d INF files in %s." % (FileNum
, WorkingDirectory
),
2029 ExtraData
="Please use '-m <INF_FILE_PATH>' switch to choose one.")
2031 Option
.ModuleFile
= NormFile(FileList
[0], Workspace
)
2033 if Option
.ModuleFile
:
2034 if os
.path
.isabs (Option
.ModuleFile
):
2035 if os
.path
.normcase (os
.path
.normpath(Option
.ModuleFile
)).find (Workspace
) == 0:
2036 Option
.ModuleFile
= NormFile(os
.path
.normpath(Option
.ModuleFile
), Workspace
)
2037 Option
.ModuleFile
= PathClass(Option
.ModuleFile
, Workspace
)
2038 ErrorCode
, ErrorInfo
= Option
.ModuleFile
.Validate(".inf", False)
2040 EdkLogger
.error("build", ErrorCode
, ExtraData
=ErrorInfo
)
2042 if Option
.PlatformFile
!= None:
2043 if os
.path
.isabs (Option
.PlatformFile
):
2044 if os
.path
.normcase (os
.path
.normpath(Option
.PlatformFile
)).find (Workspace
) == 0:
2045 Option
.PlatformFile
= NormFile(os
.path
.normpath(Option
.PlatformFile
), Workspace
)
2046 Option
.PlatformFile
= PathClass(Option
.PlatformFile
, Workspace
)
2048 if Option
.FdfFile
!= None:
2049 if os
.path
.isabs (Option
.FdfFile
):
2050 if os
.path
.normcase (os
.path
.normpath(Option
.FdfFile
)).find (Workspace
) == 0:
2051 Option
.FdfFile
= NormFile(os
.path
.normpath(Option
.FdfFile
), Workspace
)
2052 Option
.FdfFile
= PathClass(Option
.FdfFile
, Workspace
)
2053 ErrorCode
, ErrorInfo
= Option
.FdfFile
.Validate(".fdf", False)
2055 EdkLogger
.error("build", ErrorCode
, ExtraData
=ErrorInfo
)
2057 if Option
.Flag
!= None and Option
.Flag
not in ['-c', '-s']:
2058 EdkLogger
.error("build", OPTION_VALUE_INVALID
, "UNI flag must be one of -c or -s")
2060 MyBuild
= Build(Target
, Workspace
, Option
)
2061 GlobalData
.gCommandLineDefines
['ARCH'] = ' '.join(MyBuild
.ArchList
)
2063 # Drop temp tables to avoid database locked.
2064 for TmpTableName
in TmpTableDict
:
2065 SqlCommand
= """drop table IF EXISTS %s""" % TmpTableName
2066 TmpTableDict
[TmpTableName
].execute(SqlCommand
)
2067 #MyBuild.DumpBuildData()
2069 # All job done, no error found and no exception raised
2072 except FatalError
, X
:
2074 # for multi-thread build exits safely
2075 MyBuild
.Relinquish()
2076 if Option
!= None and Option
.debug
!= None:
2077 EdkLogger
.quiet("(Python %s on %s) " % (platform
.python_version(), sys
.platform
) + traceback
.format_exc())
2078 ReturnCode
= X
.args
[0]
2080 # error from Fdf parser
2082 # for multi-thread build exits safely
2083 MyBuild
.Relinquish()
2084 if Option
!= None and Option
.debug
!= None:
2085 EdkLogger
.quiet("(Python %s on %s) " % (platform
.python_version(), sys
.platform
) + traceback
.format_exc())
2087 EdkLogger
.error(X
.ToolName
, FORMAT_INVALID
, File
=X
.FileName
, Line
=X
.LineNumber
, ExtraData
=X
.Message
, RaiseError
=False)
2088 ReturnCode
= FORMAT_INVALID
2089 except KeyboardInterrupt:
2090 ReturnCode
= ABORT_ERROR
2091 if Option
!= None and Option
.debug
!= None:
2092 EdkLogger
.quiet("(Python %s on %s) " % (platform
.python_version(), sys
.platform
) + traceback
.format_exc())
2095 # for multi-thread build exits safely
2096 MyBuild
.Relinquish()
2098 # try to get the meta-file from the object causing exception
2099 Tb
= sys
.exc_info()[-1]
2100 MetaFile
= GlobalData
.gProcessingFile
2102 if 'self' in Tb
.tb_frame
.f_locals
and hasattr(Tb
.tb_frame
.f_locals
['self'], 'MetaFile'):
2103 MetaFile
= Tb
.tb_frame
.f_locals
['self'].MetaFile
2108 "Unknown fatal error when processing [%s]" % MetaFile
,
2109 ExtraData
="\n(Please send email to edk2-devel@lists.01.org for help, attaching following call stack trace!)\n",
2112 EdkLogger
.quiet("(Python %s on %s) " % (platform
.python_version(), sys
.platform
) + traceback
.format_exc())
2113 ReturnCode
= CODE_ERROR
2115 Utils
.Progressor
.Abort()
2116 Utils
.ClearDuplicatedInf()
2120 elif ReturnCode
== ABORT_ERROR
:
2121 Conclusion
= "Aborted"
2123 Conclusion
= "Failed"
2124 FinishTime
= time
.time()
2125 BuildDuration
= time
.gmtime(int(round(FinishTime
- StartTime
)))
2126 BuildDurationStr
= ""
2127 if BuildDuration
.tm_yday
> 1:
2128 BuildDurationStr
= time
.strftime("%H:%M:%S", BuildDuration
) + ", %d day(s)" % (BuildDuration
.tm_yday
- 1)
2130 BuildDurationStr
= time
.strftime("%H:%M:%S", BuildDuration
)
2133 MyBuild
.BuildReport
.GenerateReport(BuildDurationStr
)
2135 EdkLogger
.SetLevel(EdkLogger
.QUIET
)
2136 EdkLogger
.quiet("\n- %s -" % Conclusion
)
2137 EdkLogger
.quiet(time
.strftime("Build end time: %H:%M:%S, %b.%d %Y", time
.localtime()))
2138 EdkLogger
.quiet("Build total time: %s\n" % BuildDurationStr
)
2141 if __name__
== '__main__':
2143 ## 0-127 is a safe return range, and 1 is a standard default error
2144 if r
< 0 or r
> 127: r
= 1