2 Main Header file for the MMC DXE driver
4 Copyright (c) 2011, ARM Limited. All rights reserved.
6 This program and the accompanying materials
7 are licensed and made available under the terms and conditions of the BSD License
8 which accompanies this distribution. The full text of the license may be found at
9 http://opensource.org/licenses/bsd-license.php
11 THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
12 WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
21 #include <Protocol/DiskIo.h>
22 #include <Protocol/BlockIo.h>
23 #include <Protocol/DevicePath.h>
24 #include <Protocol/MmcHost.h>
26 #include <Library/UefiLib.h>
28 #define MMC_TRACE(txt) DEBUG((EFI_D_BLKIO, "MMC: " txt "\n"))
30 #define MMC_IOBLOCKS_READ 0
31 #define MMC_IOBLOCKS_WRITE 1
33 #define MMC_OCR_POWERUP 0x80000000
35 #define MMC_CSD_GET_CCC(Response) (Response[2] >> 20)
36 #define MMC_CSD_GET_TRANSPEED(Response) (Response[3] & 0xFF)
37 #define MMC_CSD_GET_READBLLEN(Response) ((Response[2] >> 16) & 0xF)
38 #define MMC_CSD_GET_WRITEBLLEN(Response) ((Response[0] >> 22) & 0xF)
39 #define MMC_CSD_GET_FILEFORMAT(Response) ((Response[0] >> 10) & 0x3)
40 #define MMC_CSD_GET_FILEFORMATGRP(Response) ((Response[0] >> 15) & 0x1)
41 #define MMC_CSD_GET_DEVICESIZE(csd) (((Response[1] >> 30) & 0x3) | ((Response[2] & 0x3FF) << 2))
42 #define HC_MMC_CSD_GET_DEVICESIZE(Response) ((Response[1] >> 16) | ((Response[2] & 0x40) << 16));
43 #define MMC_CSD_GET_DEVICESIZEMULT(csd) ((Response[1] >> 15) & 0x7)
45 #define MMC_R0_READY_FOR_DATA (1 << 8)
47 #define MMC_R0_CURRENTSTATE(Response) ((Response[0] >> 9) & 0xF)
49 #define MMC_R0_STATE_IDLE 0
50 #define MMC_R0_STATE_READY 1
51 #define MMC_R0_STATE_IDENT 2
52 #define MMC_R0_STATE_STDBY 3
53 #define MMC_R0_STATE_TRAN 4
54 #define MMC_R0_STATE_DATA 5
59 MMC_CARD_HIGH
, //MMC Card with High capacity
60 SD_CARD
, //SD 1.1 card
61 SD_CARD_2
, //SD 2.0 or above standard card
62 SD_CARD_2_HIGH
//SD 2.0 or above high capacity card
66 UINT32 Reserved0
: 7; // 0
67 UINT32 V170_V195
: 1; // 1.70V - 1.95V
68 UINT32 V200_V260
: 7; // 2.00V - 2.60V
69 UINT32 V270_V360
: 9; // 2.70V - 3.60V
70 UINT32 RESERVED_1
: 5; // Reserved
71 UINT32 AccessMode
: 2; // 00b (byte mode), 10b (sector mode)
72 UINT32 PowerUp
: 1; // This bit is set to LOW if the card has not finished the power up routine
76 UINT32 NOT_USED
; // 1 [0:0]
77 UINT32 CRC
; // CRC7 checksum [7:1]
78 UINT32 MDT
; // Manufacturing date [19:8]
79 UINT32 RESERVED_1
; // Reserved [23:20]
80 UINT32 PSN
; // Product serial number [55:24]
81 UINT8 PRV
; // Product revision [63:56]
82 UINT8 PNM
[5]; // Product name [64:103]
83 UINT16 OID
; // OEM/Application ID [119:104]
84 UINT8 MID
; // Manufacturer ID [127:120]
88 UINT8 NOT_USED
: 1; // Not used, always 1 [0:0]
89 UINT8 CRC
: 7; // CRC [7:1]
91 UINT8 RESERVED_1
: 2; // Reserved [9:8]
92 UINT8 FILE_FORMAT
: 2; // File format [11:10]
93 UINT8 TMP_WRITE_PROTECT
: 1; // Temporary write protection [12:12]
94 UINT8 PERM_WRITE_PROTECT
: 1; // Permanent write protection [13:13]
95 UINT8 COPY
: 1; // Copy flag (OTP) [14:14]
96 UINT8 FILE_FORMAT_GRP
: 1; // File format group [15:15]
98 UINT16 RESERVED_2
: 5; // Reserved [20:16]
99 UINT16 WRITE_BL_PARTIAL
: 1; // Partial blocks for write allowed [21:21]
100 UINT16 WRITE_BL_LEN
: 4; // Max. write data block length [25:22]
101 UINT16 R2W_FACTOR
: 3; // Write speed factor [28:26]
102 UINT16 RESERVED_3
: 2; // Reserved [30:29]
103 UINT16 WP_GRP_ENABLE
: 1; // Write protect group enable [31:31]
105 UINT32 WP_GRP_SIZE
: 7; // Write protect group size [38:32]
106 UINT32 SECTOR_SIZE
: 7; // Erase sector size [45:39]
107 UINT32 ERASE_BLK_EN
: 1; // Erase single block enable [46:46]
108 UINT32 C_SIZE_MULT
: 3; // Device size multiplier [49:47]
109 UINT32 VDD_W_CURR_MAX
: 3; // Max. write current @ VDD max [52:50]
110 UINT32 VDD_W_CURR_MIN
: 3; // Max. write current @ VDD min [55:53]
111 UINT32 VDD_R_CURR_MAX
: 3; // Max. read current @ VDD max [58:56]
112 UINT32 VDD_R_CURR_MIN
: 3; // Max. read current @ VDD min [61:59]
113 UINT32 C_SIZELow2
: 2; // Device size [63:62]
115 UINT32 C_SIZEHigh10
: 10;// Device size [73:64]
116 UINT32 RESERVED_4
: 2; // Reserved [75:74]
117 UINT32 DSR_IMP
: 1; // DSR implemented [76:76]
118 UINT32 READ_BLK_MISALIGN
: 1; // Read block misalignment [77:77]
119 UINT32 WRITE_BLK_MISALIGN
: 1; // Write block misalignment [78:78]
120 UINT32 READ_BL_PARTIAL
: 1; // Partial blocks for read allowed [79:79]
121 UINT32 READ_BL_LEN
: 4; // Max. read data block length [83:80]
122 UINT32 CCC
: 12;// Card command classes [95:84]
124 UINT8 TRAN_SPEED
; // Max. bus clock frequency [103:96]
125 UINT8 NSAC
; // Data read access-time 2 in CLK cycles (NSAC*100) [111:104]
126 UINT8 TAAC
; // Data read access-time 1 [119:112]
128 UINT8 RESERVED_5
: 6; // Reserved [125:120]
129 UINT8 CSD_STRUCTURE
: 2; // CSD structure [127:126]
140 typedef struct _MMC_HOST_INSTANCE
{
143 EFI_HANDLE MmcHandle
;
144 EFI_DEVICE_PATH_PROTOCOL
*DevicePath
;
147 EFI_BLOCK_IO_PROTOCOL BlockIo
;
149 EFI_MMC_HOST_PROTOCOL
*MmcHost
;
154 #define MMC_HOST_INSTANCE_SIGNATURE SIGNATURE_32('m', 'm', 'c', 'h')
155 #define MMC_HOST_INSTANCE_FROM_BLOCK_IO_THIS(a) CR (a, MMC_HOST_INSTANCE, BlockIo, MMC_HOST_INSTANCE_SIGNATURE)
156 #define MMC_HOST_INSTANCE_FROM_LINK(a) CR (a, MMC_HOST_INSTANCE, Link, MMC_HOST_INSTANCE_SIGNATURE)
162 IN EFI_COMPONENT_NAME_PROTOCOL
*This
,
164 OUT CHAR16
**DriverName
169 MmcGetControllerName (
170 IN EFI_COMPONENT_NAME_PROTOCOL
*This
,
171 IN EFI_HANDLE ControllerHandle
,
172 IN EFI_HANDLE ChildHandle OPTIONAL
,
174 OUT CHAR16
**ControllerName
177 extern EFI_COMPONENT_NAME_PROTOCOL gMmcComponentName
;
178 extern EFI_COMPONENT_NAME2_PROTOCOL gMmcComponentName2
;
180 extern EFI_DRIVER_DIAGNOSTICS2_PROTOCOL gMmcDriverDiagnostics2
;
182 extern LIST_ENTRY mMmcHostPool
;
185 Reset the block device.
187 This function implements EFI_BLOCK_IO_PROTOCOL.Reset().
188 It resets the block device hardware.
189 ExtendedVerification is ignored in this implementation.
191 @param This Indicates a pointer to the calling context.
192 @param ExtendedVerification Indicates that the driver may perform a more exhaustive
193 verification operation of the device during reset.
195 @retval EFI_SUCCESS The block device was reset.
196 @retval EFI_DEVICE_ERROR The block device is not functioning correctly and could not be reset.
202 IN EFI_BLOCK_IO_PROTOCOL
*This
,
203 IN BOOLEAN ExtendedVerification
207 Reads the requested number of blocks from the device.
209 This function implements EFI_BLOCK_IO_PROTOCOL.ReadBlocks().
210 It reads the requested number of blocks from the device.
211 All the blocks are read, or an error is returned.
213 @param This Indicates a pointer to the calling context.
214 @param MediaId The media ID that the read request is for.
215 @param Lba The starting logical block address to read from on the device.
216 @param BufferSize The size of the Buffer in bytes.
217 This must be a multiple of the intrinsic block size of the device.
218 @param Buffer A pointer to the destination buffer for the data. The caller is
219 responsible for either having implicit or explicit ownership of the buffer.
221 @retval EFI_SUCCESS The data was read correctly from the device.
222 @retval EFI_DEVICE_ERROR The device reported an error while attempting to perform the read operation.
223 @retval EFI_NO_MEDIA There is no media in the device.
224 @retval EFI_MEDIA_CHANGED The MediaId is not for the current media.
225 @retval EFI_BAD_BUFFER_SIZE The BufferSize parameter is not a multiple of the intrinsic block size of the device.
226 @retval EFI_INVALID_PARAMETER The read request contains LBAs that are not valid,
227 or the buffer is not on proper alignment.
233 IN EFI_BLOCK_IO_PROTOCOL
*This
,
241 Writes a specified number of blocks to the device.
243 This function implements EFI_BLOCK_IO_PROTOCOL.WriteBlocks().
244 It writes a specified number of blocks to the device.
245 All blocks are written, or an error is returned.
247 @param This Indicates a pointer to the calling context.
248 @param MediaId The media ID that the write request is for.
249 @param Lba The starting logical block address to be written.
250 @param BufferSize The size of the Buffer in bytes.
251 This must be a multiple of the intrinsic block size of the device.
252 @param Buffer Pointer to the source buffer for the data.
254 @retval EFI_SUCCESS The data were written correctly to the device.
255 @retval EFI_WRITE_PROTECTED The device cannot be written to.
256 @retval EFI_NO_MEDIA There is no media in the device.
257 @retval EFI_MEDIA_CHANGED The MediaId is not for the current media.
258 @retval EFI_DEVICE_ERROR The device reported an error while attempting to perform the write operation.
259 @retval EFI_BAD_BUFFER_SIZE The BufferSize parameter is not a multiple of the intrinsic
260 block size of the device.
261 @retval EFI_INVALID_PARAMETER The write request contains LBAs that are not valid,
262 or the buffer is not on proper alignment.
268 IN EFI_BLOCK_IO_PROTOCOL
*This
,
276 Flushes all modified data to a physical block device.
278 @param This Indicates a pointer to the calling context.
280 @retval EFI_SUCCESS All outstanding data were written correctly to the device.
281 @retval EFI_DEVICE_ERROR The device reported an error while attempting to write data.
282 @retval EFI_NO_MEDIA There is no media in the device.
288 IN EFI_BLOCK_IO_PROTOCOL
*This
291 EFI_STATUS
InitializeMmcDevice (
292 IN MMC_HOST_INSTANCE
*MmcHost