2 ISA I/O Protocol is used by ISA device drivers to perform I/O, MMIO and DMA
3 operations on the ISA controllers they manage.
5 Copyright (c) 2006 - 2010, Intel Corporation. All rights reserved<BR>
6 This program and the accompanying materials are licensed and made available under
7 the terms and conditions of the BSD License that accompanies this distribution.
8 The full text of the license may be found at
9 http://opensource.org/licenses/bsd-license.php.
11 THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
12 WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
16 #ifndef _EFI_ISA_IO_H_
17 #define _EFI_ISA_IO_H_
19 #include <Protocol/IsaAcpi.h>
22 /// Global ID for the EFI_ISA_IO_PROTOCOL
24 #define EFI_ISA_IO_PROTOCOL_GUID \
26 0x7ee2bd44, 0x3da0, 0x11d4, { 0x9a, 0x38, 0x0, 0x90, 0x27, 0x3f, 0xc1, 0x4d } \
30 /// Forward declaration for the EFI_ISA_IO_PROTOCOL.
32 typedef struct _EFI_ISA_IO_PROTOCOL EFI_ISA_IO_PROTOCOL
;
35 /// Width of EFI_ISA_IO_PROTOCOL I/O Port and MMIO operations.
38 EfiIsaIoWidthUint8
= 0, ///< 8-bit operation.
39 EfiIsaIoWidthUint16
, ///< 16-bit operation.
40 EfiIsaIoWidthUint32
, ///< 32-bit operation
41 EfiIsaIoWidthReserved
,
42 EfiIsaIoWidthFifoUint8
, ///< 8-bit FIFO operation.
43 EfiIsaIoWidthFifoUint16
, ///< 16-bit FIFO operation.
44 EfiIsaIoWidthFifoUint32
, ///< 32-bit FIFO operation.
45 EfiIsaIoWidthFifoReserved
,
46 EfiIsaIoWidthFillUint8
, ///< 8-bit Fill operation.
47 EfiIsaIoWidthFillUint16
, ///< 16-bit Fill operation.
48 EfiIsaIoWidthFillUint32
, ///< 32-bit Fill operation.
49 EfiIsaIoWidthFillReserved
,
51 } EFI_ISA_IO_PROTOCOL_WIDTH
;
54 /// Attributes for the EFI_ISA_IO_PROTOCOL common DMA buffer allocations.
56 #define EFI_ISA_IO_ATTRIBUTE_MEMORY_WRITE_COMBINE 0x080 ///< Map a memory range so write are combined.
57 #define EFI_ISA_IO_ATTRIBUTE_MEMORY_CACHED 0x800 ///< Map a memory range so all read and write accesses are cached.
58 #define EFI_ISA_IO_ATTRIBUTE_MEMORY_DISABLE 0x1000 ///< Disable a memory range.
61 /// Channel attribute for EFI_ISA_IO_PROTOCOL slave DMA requests
63 #define EFI_ISA_IO_SLAVE_DMA_ATTRIBUTE_SPEED_COMPATIBLE 0x001 ///< Set the speed of the DMA transfer in compatible mode.
64 #define EFI_ISA_IO_SLAVE_DMA_ATTRIBUTE_SPEED_A 0x002 ///< Not supported.
65 #define EFI_ISA_IO_SLAVE_DMA_ATTRIBUTE_SPEED_B 0x004 ///< Not supported.
66 #define EFI_ISA_IO_SLAVE_DMA_ATTRIBUTE_SPEED_C 0x008 ///< Not supported.
67 #define EFI_ISA_IO_SLAVE_DMA_ATTRIBUTE_WIDTH_8 0x010 ///< Request 8-bit DMA transfers. Only available on channels 0..3.
68 #define EFI_ISA_IO_SLAVE_DMA_ATTRIBUTE_WIDTH_16 0x020 ///< Request 16-bit DMA transfers. Only available on channels 4..7.
69 #define EFI_ISA_IO_SLAVE_DMA_ATTRIBUTE_SINGLE_MODE 0x040 ///< Request a single DMA transfer.
70 #define EFI_ISA_IO_SLAVE_DMA_ATTRIBUTE_DEMAND_MODE 0x080 ///< Request multiple DMA transfers until TC (Terminal Count) or EOP (End of Process).
71 #define EFI_ISA_IO_SLAVE_DMA_ATTRIBUTE_AUTO_INITIALIZE 0x100 ///< Automatically reload base and count at the end of the DMA transfer.
74 /// The DMA opreration type for EFI_ISA_IO_PROTOCOL DMA requests.
78 /// A read operation from system memory by a bus master.
80 EfiIsaIoOperationBusMasterRead
,
82 /// A write operation to system memory by a bus master.
84 EfiIsaIoOperationBusMasterWrite
,
86 /// Provides both read and write access to system memory by both the processor
87 /// and a bus master. The buffer is coherent from both the processor's and the
88 /// bus master's point of view.
90 EfiIsaIoOperationBusMasterCommonBuffer
,
92 /// A read operation from system memory by a slave device.
94 EfiIsaIoOperationSlaveRead
,
96 /// A write operation to system memory by a slave master.
98 EfiIsaIoOperationSlaveWrite
,
99 EfiIsaIoOperationMaximum
100 } EFI_ISA_IO_PROTOCOL_OPERATION
;
103 Performs ISA I/O and MMIO Read/Write Cycles
105 @param[in] This A pointer to the EFI_ISA_IO_PROTOCOL instance.
106 @param[in] Width Specifies the width of the I/O or MMIO operation.
107 @param[in] Offset The offset into the ISA I/O or MMIO space to start the
109 @param[in] Count The number of I/O or MMIO operations to perform.
110 @param[in, out] Buffer For read operations, the destination buffer to store
111 the results. For write operations, the source buffer to
114 @retval EFI_SUCCESS The data was successfully read from or written to the device.
115 @retval EFI_UNSUPPORTED The Offset is not valid for this device.
116 @retval EFI_INVALID_PARAMETER Width or Count, or both, were invalid.
117 @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
122 (EFIAPI
*EFI_ISA_IO_PROTOCOL_IO_MEM
)(
123 IN EFI_ISA_IO_PROTOCOL
*This
,
124 IN EFI_ISA_IO_PROTOCOL_WIDTH Width
,
131 /// Structure of functions for accessing ISA I/O and MMIO space.
135 /// Read from ISA I/O or MMIO space.
137 EFI_ISA_IO_PROTOCOL_IO_MEM Read
;
139 /// Write to ISA I/O or MMIO space.
141 EFI_ISA_IO_PROTOCOL_IO_MEM Write
;
142 } EFI_ISA_IO_PROTOCOL_ACCESS
;
145 Copies data from one region of ISA MMIO space to another region of ISA
148 @param[in] This A pointer to the EFI_ISA_IO_PROTOCOL instance.
149 @param[in] Width Specifies the width of the MMIO copy operation.
150 @param[in] DestOffset The offset of the destination in ISA MMIO space.
151 @param[in] SrcOffset The offset of the source in ISA MMIO space.
152 @param[in] Count The number tranfers to perform for this copy operation.
154 @retval EFI_SUCCESS The data was copied sucessfully.
155 @retval EFI_UNSUPPORTED The DestOffset or SrcOffset is not valid for this device.
156 @retval EFI_INVALID_PARAMETER Width or Count, or both, were invalid.
157 @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
162 (EFIAPI
*EFI_ISA_IO_PROTOCOL_COPY_MEM
)(
163 IN EFI_ISA_IO_PROTOCOL
*This
,
164 IN EFI_ISA_IO_PROTOCOL_WIDTH Width
,
165 IN UINT32 DestOffset
,
171 Maps a memory region for DMA.
173 This function returns the device-specific addresses required to access system memory.
174 This function is used to map system memory for ISA DMA operations. All ISA DMA
175 operations must be performed through their mapped addresses, and such mappings must
176 be freed with EFI_ISA_IO_PROTOCOL.Unmap() after the DMA operation is completed.
178 If the DMA operation is a single read or write data transfer through an ISA bus
179 master, then EfiIsaIoOperationBusMasterRead or EfiIsaIoOperationBusMasterWrite
180 is used and the range is unmapped to complete the operation. If the DMA operation
181 is a single read or write data transfer through an ISA slave controller, then
182 EfiIsaIoOperationSlaveRead or EfiIsaIoOperationSlaveWrite is used and the range
183 is unmapped to complete the operation.
185 If performing a DMA read operation, all the data must be present in system memory before the Map() is performed. Similarly,
186 if performing a DMA write operation, the data must not be accessed in system
187 memory until EFI_ISA_IO_PROTOCOL.Unmap() is performed. Bus master operations that
188 require both read and write access or require multiple host device interactions
189 within the same mapped region must use EfiIsaIoOperationBusMasterCommonBuffer.
190 However, only memory allocated via the EFI_ISA_IO_PROTOCOL.AllocateBuffer() interface
191 is guaranteed to be able to be mapped for this operation type. In all mapping
192 requests the NumberOfBytes returned may be less than originally requested. It is
193 the caller's responsibility to make additional requests to complete the entire
196 @param[in] This A pointer to the EFI_ISA_IO_PROTOCOL instance.
197 @param[in] Operation Indicates the type of DMA (slave or bus master),
198 and if the DMA operation is going to read or
199 write to system memory.
200 @param[in] ChannelNumber The slave channel number to use for this DMA
201 operation. If Operation and ChannelAttributes
202 shows that this device performs bus mastering
203 DMA, then this field is ignored. The legal
204 range for this field is 0..7.
205 @param[in] ChannelAttributes A bitmask of the attributes used to configure
206 the slave DMA channel for this DMA operation.
207 See EFI_ISA_IO_SLAVE_DMA_ATTRIBUTE_* for the
208 legal bit combinations.
209 @param[in] HostAddress The system memory address to map to the device.
210 @param[in, out] NumberOfBytes On input the number of bytes to map. On
211 output the number of bytes that were mapped.
212 @param[out] DeviceAddress The resulting map address for the bus master
213 device to use to access the hosts HostAddress.
214 @param[out] Mapping A returned value that must be passed to into
215 EFI_ISA_IO_PROTOCOL.Unmap() to free all the the
216 resources associated with this map request.
218 @retval EFI_SUCCESS The range was mapped for the returned NumberOfBytes.
219 @retval EFI_INVALID_PARAMETER The Operation is undefined.
220 @retval EFI_INVALID_PARAMETER The HostAddress is undefined.
221 @retval EFI_UNSUPPORTED The HostAddress can not be mapped as a common buffer.
222 @retval EFI_DEVICE_ERROR The system hardware could not map the requested address.
223 @retval EFI_OUT_OF_RESOURCES The memory pages could not be allocated.
228 (EFIAPI
*EFI_ISA_IO_PROTOCOL_MAP
)(
229 IN EFI_ISA_IO_PROTOCOL
*This
,
230 IN EFI_ISA_IO_PROTOCOL_OPERATION Operation
,
231 IN UINT8 ChannelNumber OPTIONAL
,
232 IN UINT32 ChannelAttributes
,
233 IN VOID
*HostAddress
,
234 IN OUT UINTN
*NumberOfBytes
,
235 OUT EFI_PHYSICAL_ADDRESS
*DeviceAddress
,
240 Unmaps a memory region that was previously mapped with EFI_ISA_IO_PROTOCOL.Map().
242 The EFI_ISA_IO_PROTOCOL.Map() operation is completed and any corresponding
243 resources are released. If the operation was EfiIsaIoOperationSlaveWrite
244 or EfiIsaIoOperationBusMasterWrite, the data is committed to system memory.
245 Any resources used for the mapping are freed.
247 @param[in] This A pointer to the EFI_ISA_IO_PROTOCOL instance.
248 @param[in] Mapping The mapping value returned from EFI_ISA_IO_PROTOCOL.Map().
250 @retval EFI_SUCCESS The memory region was unmapped.
251 @retval EFI_DEVICE_ERROR The data was not committed to the target system memory.
255 (EFIAPI
*EFI_ISA_IO_PROTOCOL_UNMAP
)(
256 IN EFI_ISA_IO_PROTOCOL
*This
,
261 Allocates pages that are suitable for an EfiIsaIoOperationBusMasterCommonBuffer
264 @param[in] This A pointer to the EFI_ISA_IO_PROTOCOL instance.
265 @param[in] Type The type allocation to perform.
266 @param[in] MemoryType The type of memory to allocate.
267 @param[in] Pages The number of pages to allocate.
268 @param[out] HostAddress A pointer to store the base address of the allocated range.
269 @param[in] Attributes The requested bit mask of attributes for the allocated range.
271 @retval EFI_SUCCESS The requested memory pages were allocated.
272 @retval EFI_INVALID_PARAMETER Type is invalid.
273 @retval EFI_INVALID_PARAMETER MemoryType is invalid.
274 @retval EFI_INVALID_PARAMETER HostAddress is NULL.
275 @retval EFI_UNSUPPORTED Attributes is unsupported.
276 @retval EFI_UNSUPPORTED The memory range specified by HostAddress, Pages,
277 and Type is not available for common buffer use.
278 @retval EFI_OUT_OF_RESOURCES The memory pages could not be allocated.
283 (EFIAPI
*EFI_ISA_IO_PROTOCOL_ALLOCATE_BUFFER
)(
284 IN EFI_ISA_IO_PROTOCOL
*This
,
285 IN EFI_ALLOCATE_TYPE Type
,
286 IN EFI_MEMORY_TYPE MemoryType
,
288 OUT VOID
**HostAddress
,
293 Frees a common buffer that was allocated with EFI_ISA_IO_PROTOCOL.AllocateBuffer().
295 @param[in] This A pointer to the EFI_ISA_IO_PROTOCOL instance.
296 @param[in] Pages The number of pages to free from the previously allocated common buffer.
297 @param[in] HostAddress The base address of the previously allocated common buffer.
300 @retval EFI_SUCCESS The requested memory pages were freed.
301 @retval EFI_INVALID_PARAMETER The memory was not allocated with EFI_ISA_IO.AllocateBufer().
306 (EFIAPI
*EFI_ISA_IO_PROTOCOL_FREE_BUFFER
)(
307 IN EFI_ISA_IO_PROTOCOL
*This
,
313 Flushes a DMA buffer, which forces all DMA posted write transactions to complete.
315 @param[in] This A pointer to the EFI_ISA_IO_PROTOCOL instance.
317 @retval EFI_SUCCESS The DMA buffers were flushed.
318 @retval EFI_DEVICE_ERROR The buffers were not flushed due to a hardware error.
323 (EFIAPI
*EFI_ISA_IO_PROTOCOL_FLUSH
)(
324 IN EFI_ISA_IO_PROTOCOL
*This
328 /// The EFI_ISA_IO_PROTOCOL provides the basic Memory, I/O, and DMA interfaces
329 /// used to abstract accesses to ISA controllers. There is one EFI_ISA_IO_PROTOCOL
330 /// instance for each ISA controller on a ISA bus. A device driver that wishes
331 /// to manage an ISA controller in a system will have to retrieve the
332 /// ISA_PCI_IO_PROTOCOL instance associated with the ISA controller.
334 struct _EFI_ISA_IO_PROTOCOL
{
335 EFI_ISA_IO_PROTOCOL_ACCESS Mem
;
336 EFI_ISA_IO_PROTOCOL_ACCESS Io
;
337 EFI_ISA_IO_PROTOCOL_COPY_MEM CopyMem
;
338 EFI_ISA_IO_PROTOCOL_MAP Map
;
339 EFI_ISA_IO_PROTOCOL_UNMAP Unmap
;
340 EFI_ISA_IO_PROTOCOL_ALLOCATE_BUFFER AllocateBuffer
;
341 EFI_ISA_IO_PROTOCOL_FREE_BUFFER FreeBuffer
;
342 EFI_ISA_IO_PROTOCOL_FLUSH Flush
;
344 /// The list of I/O , MMIO, DMA, and Interrupt resources associated with the
345 /// ISA controller abstracted by this instance of the EFI_ISA_IO_PROTOCOL.
347 EFI_ISA_ACPI_RESOURCE_LIST
*ResourceList
;
349 /// The size, in bytes, of the ROM image.
353 /// A pointer to the in memory copy of the ROM image. The ISA Bus Driver is responsible
354 /// for allocating memory for the ROM image, and copying the contents of the ROM to memory
355 /// during ISA Bus initialization.
360 extern EFI_GUID gEfiIsaIoProtocolGuid
;