Makefile.objs

   1 #######################################################################
   2 # QObject
   3 qobject-obj-y = qint.o qstring.o qdict.o qlist.o qfloat.o qbool.o
   4 qobject-obj-y += qjson.o json-lexer.o json-streamer.o json-parser.o
   5 qobject-obj-y += qerror.o error.o qemu-error.o
   6
   7 #######################################################################
   8 # oslib-obj-y is code depending on the OS (win32 vs posix)
   9 oslib-obj-y = osdep.o
  10 oslib-obj-$(CONFIG_WIN32) += oslib-win32.o qemu-thread-win32.o
  11 oslib-obj-$(CONFIG_POSIX) += oslib-posix.o qemu-thread-posix.o
  12
  13 #######################################################################
  14 # coroutines
  15 coroutine-obj-y = qemu-coroutine.o qemu-coroutine-lock.o qemu-coroutine-io.o
  16 coroutine-obj-y += qemu-coroutine-sleep.o
  17 ifeq ($(CONFIG_UCONTEXT_COROUTINE),y)
  18 coroutine-obj-$(CONFIG_POSIX) += coroutine-ucontext.o
  19 else
  20 ifeq ($(CONFIG_SIGALTSTACK_COROUTINE),y)
  21 coroutine-obj-$(CONFIG_POSIX) += coroutine-sigaltstack.o
  22 else
  23 coroutine-obj-$(CONFIG_POSIX) += coroutine-gthread.o
  24 endif
  25 endif
  26 coroutine-obj-$(CONFIG_WIN32) += coroutine-win32.o
  27
  28 #######################################################################
  29 # block-obj-y is code used by both qemu system emulation and qemu-img
  30
  31 block-obj-y = cutils.o cache-utils.o qemu-option.o module.o async.o
  32 block-obj-y += nbd.o block.o aio.o aes.o qemu-config.o qemu-progress.o qemu-sockets.o
  33 block-obj-y += $(coroutine-obj-y) $(qobject-obj-y) $(version-obj-y)
  34 block-obj-$(CONFIG_POSIX) += posix-aio-compat.o
  35 block-obj-$(CONFIG_LINUX_AIO) += linux-aio.o
  36
  37 block-nested-y += raw.o cow.o qcow.o vdi.o vmdk.o cloop.o dmg.o bochs.o vpc.o vvfat.o
  38 block-nested-y += qcow2.o qcow2-refcount.o qcow2-cluster.o qcow2-snapshot.o qcow2-cache.o
  39 block-nested-y += qed.o qed-gencb.o qed-l2-cache.o qed-table.o qed-cluster.o
  40 block-nested-y += qed-check.o
  41 block-nested-y += parallels.o nbd.o blkdebug.o sheepdog.o blkverify.o
  42 block-nested-y += stream.o
  43 block-nested-$(CONFIG_WIN32) += raw-win32.o
  44 block-nested-$(CONFIG_POSIX) += raw-posix.o
  45 block-nested-$(CONFIG_LIBISCSI) += iscsi.o
  46 block-nested-$(CONFIG_CURL) += curl.o
  47 block-nested-$(CONFIG_RBD) += rbd.o
  48
  49 block-obj-y +=  $(addprefix block/, $(block-nested-y))
  50
  51 net-obj-y = net.o
  52 net-nested-y = queue.o checksum.o util.o
  53 net-nested-y += socket.o
  54 net-nested-y += dump.o
  55 net-nested-$(CONFIG_POSIX) += tap.o
  56 net-nested-$(CONFIG_LINUX) += tap-linux.o
  57 net-nested-$(CONFIG_WIN32) += tap-win32.o
  58 net-nested-$(CONFIG_BSD) += tap-bsd.o
  59 net-nested-$(CONFIG_SOLARIS) += tap-solaris.o
  60 net-nested-$(CONFIG_AIX) += tap-aix.o
  61 net-nested-$(CONFIG_HAIKU) += tap-haiku.o
  62 net-nested-$(CONFIG_SLIRP) += slirp.o
  63 net-nested-$(CONFIG_VDE) += vde.o
  64 net-obj-y += $(addprefix net/, $(net-nested-y))
  65
  66 ifeq ($(CONFIG_VIRTIO)$(CONFIG_VIRTFS)$(CONFIG_PCI),yyy)
  67 # Lots of the fsdev/9pcode is pulled in by vl.c via qemu_fsdev_add.
  68 # only pull in the actual virtio-9p device if we also enabled virtio.
  69 CONFIG_REALLY_VIRTFS=y
  70 fsdev-nested-y = qemu-fsdev.o virtio-9p-marshal.o
  71 else
  72 fsdev-nested-y = qemu-fsdev-dummy.o
  73 endif
  74 fsdev-obj-$(CONFIG_VIRTFS) += $(addprefix fsdev/, $(fsdev-nested-y))
  75
  76 ######################################################################
  77 # Target independent part of system emulation. The long term path is to
  78 # suppress *all* target specific code in case of system emulation, i.e. a
  79 # single QEMU executable should support all CPUs and machines.
  80
  81 common-obj-y = $(block-obj-y) blockdev.o
  82 common-obj-y += $(net-obj-y)
  83 common-obj-y += $(qobject-obj-y)
  84 common-obj-$(CONFIG_LINUX) += $(fsdev-obj-$(CONFIG_LINUX))
  85 common-obj-y += readline.o console.o cursor.o
  86 common-obj-y += $(oslib-obj-y)
  87 common-obj-$(CONFIG_WIN32) += os-win32.o
  88 common-obj-$(CONFIG_POSIX) += os-posix.o
  89
  90 common-obj-y += tcg-runtime.o host-utils.o main-loop.o
  91 common-obj-y += irq.o input.o
  92 common-obj-$(CONFIG_PTIMER) += ptimer.o
  93 common-obj-$(CONFIG_MAX7310) += max7310.o
  94 common-obj-$(CONFIG_WM8750) += wm8750.o
  95 common-obj-$(CONFIG_TWL92230) += twl92230.o
  96 common-obj-$(CONFIG_TSC2005) += tsc2005.o
  97 common-obj-$(CONFIG_LM832X) += lm832x.o
  98 common-obj-$(CONFIG_TMP105) += tmp105.o
  99 common-obj-$(CONFIG_STELLARIS_INPUT) += stellaris_input.o
 100 common-obj-$(CONFIG_SSD0303) += ssd0303.o
 101 common-obj-$(CONFIG_SSD0323) += ssd0323.o
 102 common-obj-$(CONFIG_ADS7846) += ads7846.o
 103 common-obj-$(CONFIG_MAX111X) += max111x.o
 104 common-obj-$(CONFIG_DS1338) += ds1338.o
 105 common-obj-y += i2c.o smbus.o smbus_eeprom.o
 106 common-obj-y += eeprom93xx.o
 107 common-obj-y += scsi-disk.o cdrom.o
 108 common-obj-y += scsi-generic.o scsi-bus.o
 109 common-obj-y += hid.o
 110 common-obj-y += usb.o usb-hub.o usb-$(HOST_USB).o usb-hid.o usb-msd.o usb-wacom.o
 111 common-obj-y += usb-serial.o usb-net.o usb-bus.o usb-desc.o usb-audio.o
 112 common-obj-$(CONFIG_SSI) += ssi.o
 113 common-obj-$(CONFIG_SSI_SD) += ssi-sd.o
 114 common-obj-$(CONFIG_SD) += sd.o
 115 common-obj-y += bt.o bt-host.o bt-vhci.o bt-l2cap.o bt-sdp.o bt-hci.o bt-hid.o usb-bt.o
 116 common-obj-y += bt-hci-csr.o
 117 common-obj-y += buffered_file.o migration.o migration-tcp.o
 118 common-obj-y += qemu-char.o #aio.o
 119 common-obj-y += msmouse.o ps2.o
 120 common-obj-y += qdev.o qdev-properties.o qdev-monitor.o
 121 common-obj-y += block-migration.o iohandler.o
 122 common-obj-y += pflib.o
 123 common-obj-y += bitmap.o bitops.o
 124
 125 common-obj-$(CONFIG_BRLAPI) += baum.o
 126 common-obj-$(CONFIG_POSIX) += migration-exec.o migration-unix.o migration-fd.o
 127 common-obj-$(CONFIG_WIN32) += version.o
 128
 129 common-obj-$(CONFIG_SPICE) += ui/spice-core.o ui/spice-input.o ui/spice-display.o spice-qemu-char.o
 130
 131 include $(SRC_PATH)/qom/Makefile
 132 common-obj-y += $(addprefix qom/, $(qom-y))
 133
 134 audio-obj-y = audio.o noaudio.o wavaudio.o mixeng.o
 135 audio-obj-$(CONFIG_SDL) += sdlaudio.o
 136 audio-obj-$(CONFIG_OSS) += ossaudio.o
 137 audio-obj-$(CONFIG_SPICE) += spiceaudio.o
 138 audio-obj-$(CONFIG_COREAUDIO) += coreaudio.o
 139 audio-obj-$(CONFIG_ALSA) += alsaaudio.o
 140 audio-obj-$(CONFIG_DSOUND) += dsoundaudio.o
 141 audio-obj-$(CONFIG_FMOD) += fmodaudio.o
 142 audio-obj-$(CONFIG_ESD) += esdaudio.o
 143 audio-obj-$(CONFIG_PA) += paaudio.o
 144 audio-obj-$(CONFIG_WINWAVE) += winwaveaudio.o
 145 audio-obj-$(CONFIG_AUDIO_PT_INT) += audio_pt_int.o
 146 audio-obj-$(CONFIG_AUDIO_WIN_INT) += audio_win_int.o
 147 audio-obj-y += wavcapture.o
 148 common-obj-y += $(addprefix audio/, $(audio-obj-y))
 149
 150 ui-obj-y += keymaps.o
 151 ui-obj-$(CONFIG_SDL) += sdl.o sdl_zoom.o x_keymap.o
 152 ui-obj-$(CONFIG_COCOA) += cocoa.o
 153 ui-obj-$(CONFIG_CURSES) += curses.o
 154 vnc-obj-y += vnc.o d3des.o
 155 vnc-obj-y += vnc-enc-zlib.o vnc-enc-hextile.o
 156 vnc-obj-y += vnc-enc-tight.o vnc-palette.o
 157 vnc-obj-y += vnc-enc-zrle.o
 158 vnc-obj-$(CONFIG_VNC_TLS) += vnc-tls.o vnc-auth-vencrypt.o
 159 vnc-obj-$(CONFIG_VNC_SASL) += vnc-auth-sasl.o
 160 ifdef CONFIG_VNC_THREAD
 161 vnc-obj-y += vnc-jobs-async.o
 162 else
 163 vnc-obj-y += vnc-jobs-sync.o
 164 endif
 165 common-obj-y += $(addprefix ui/, $(ui-obj-y))
 166 common-obj-$(CONFIG_VNC) += $(addprefix ui/, $(vnc-obj-y))
 167
 168 common-obj-y += iov.o acl.o
 169 common-obj-$(CONFIG_POSIX) += compatfd.o
 170 common-obj-y += notify.o event_notifier.o
 171 common-obj-y += qemu-timer.o qemu-timer-common.o
 172
 173 slirp-obj-y = cksum.o if.o ip_icmp.o ip_input.o ip_output.o
 174 slirp-obj-y += slirp.o mbuf.o misc.o sbuf.o socket.o tcp_input.o tcp_output.o
 175 slirp-obj-y += tcp_subr.o tcp_timer.o udp.o bootp.o tftp.o arp_table.o
 176 common-obj-$(CONFIG_SLIRP) += $(addprefix slirp/, $(slirp-obj-y))
 177
 178 # xen backend driver support
 179 common-obj-$(CONFIG_XEN_BACKEND) += xen_backend.o xen_devconfig.o
 180 common-obj-$(CONFIG_XEN_BACKEND) += xen_console.o xenfb.o xen_disk.o xen_nic.o
 181
 182 ######################################################################
 183 # libuser
 184
 185 user-obj-y =
 186 user-obj-y += envlist.o path.o
 187 user-obj-y += tcg-runtime.o host-utils.o
 188 user-obj-y += cutils.o cache-utils.o
 189 user-obj-y += $(trace-obj-y)
 190
 191 ######################################################################
 192 # libhw
 193
 194 hw-obj-y =
 195 hw-obj-y += vl.o loader.o
 196 hw-obj-$(CONFIG_VIRTIO) += virtio-console.o
 197 hw-obj-y += usb-libhw.o
 198 hw-obj-$(CONFIG_VIRTIO_PCI) += virtio-pci.o
 199 hw-obj-y += fw_cfg.o
 200 hw-obj-$(CONFIG_PCI) += pci.o pci_bridge.o
 201 hw-obj-$(CONFIG_PCI) += msix.o msi.o
 202 hw-obj-$(CONFIG_PCI) += pci_host.o pcie_host.o
 203 hw-obj-$(CONFIG_PCI) += ioh3420.o xio3130_upstream.o xio3130_downstream.o
 204 hw-obj-y += watchdog.o
 205 hw-obj-$(CONFIG_ISA_MMIO) += isa_mmio.o
 206 hw-obj-$(CONFIG_ECC) += ecc.o
 207 hw-obj-$(CONFIG_NAND) += nand.o
 208 hw-obj-$(CONFIG_PFLASH_CFI01) += pflash_cfi01.o
 209 hw-obj-$(CONFIG_PFLASH_CFI02) += pflash_cfi02.o
 210
 211 hw-obj-$(CONFIG_M48T59) += m48t59.o
 212 hw-obj-$(CONFIG_ESCC) += escc.o
 213 hw-obj-$(CONFIG_EMPTY_SLOT) += empty_slot.o
 214
 215 hw-obj-$(CONFIG_SERIAL) += serial.o
 216 hw-obj-$(CONFIG_PARALLEL) += parallel.o
 217 hw-obj-$(CONFIG_I8254) += i8254_common.o i8254.o
 218 hw-obj-$(CONFIG_PCSPK) += pcspk.o
 219 hw-obj-$(CONFIG_PCKBD) += pckbd.o
 220 hw-obj-$(CONFIG_USB_UHCI) += usb-uhci.o
 221 hw-obj-$(CONFIG_USB_OHCI) += usb-ohci.o
 222 hw-obj-$(CONFIG_USB_EHCI) += usb-ehci.o
 223 hw-obj-$(CONFIG_USB_XHCI) += usb-xhci.o
 224 hw-obj-$(CONFIG_FDC) += fdc.o
 225 hw-obj-$(CONFIG_ACPI) += acpi.o acpi_piix4.o
 226 hw-obj-$(CONFIG_APM) += pm_smbus.o apm.o
 227 hw-obj-$(CONFIG_DMA) += dma.o
 228 hw-obj-$(CONFIG_I82374) += i82374.o
 229 hw-obj-$(CONFIG_HPET) += hpet.o
 230 hw-obj-$(CONFIG_APPLESMC) += applesmc.o
 231 hw-obj-$(CONFIG_SMARTCARD) += usb-ccid.o ccid-card-passthru.o
 232 hw-obj-$(CONFIG_SMARTCARD_NSS) += ccid-card-emulated.o
 233 hw-obj-$(CONFIG_USB_REDIR) += usb-redir.o
 234 hw-obj-$(CONFIG_I8259) += i8259_common.o i8259.o
 235
 236 # PPC devices
 237 hw-obj-$(CONFIG_PREP_PCI) += prep_pci.o
 238 hw-obj-$(CONFIG_I82378) += i82378.o
 239 # Mac shared devices
 240 hw-obj-$(CONFIG_MACIO) += macio.o
 241 hw-obj-$(CONFIG_CUDA) += cuda.o
 242 hw-obj-$(CONFIG_ADB) += adb.o
 243 hw-obj-$(CONFIG_MAC_NVRAM) += mac_nvram.o
 244 hw-obj-$(CONFIG_MAC_DBDMA) += mac_dbdma.o
 245 # OldWorld PowerMac
 246 hw-obj-$(CONFIG_HEATHROW_PIC) += heathrow_pic.o
 247 hw-obj-$(CONFIG_GRACKLE_PCI) += grackle_pci.o
 248 # NewWorld PowerMac
 249 hw-obj-$(CONFIG_UNIN_PCI) += unin_pci.o
 250 hw-obj-$(CONFIG_DEC_PCI) += dec_pci.o
 251 # PowerPC E500 boards
 252 hw-obj-$(CONFIG_PPCE500_PCI) += ppce500_pci.o
 253
 254 # MIPS devices
 255 hw-obj-$(CONFIG_PIIX4) += piix4.o
 256 hw-obj-$(CONFIG_G364FB) += g364fb.o
 257 hw-obj-$(CONFIG_JAZZ_LED) += jazz_led.o
 258
 259 # PCI watchdog devices
 260 hw-obj-$(CONFIG_PCI) += wdt_i6300esb.o
 261
 262 hw-obj-$(CONFIG_PCI) += pcie.o pcie_aer.o pcie_port.o
 263
 264 # PCI network cards
 265 hw-obj-$(CONFIG_NE2000_PCI) += ne2000.o
 266 hw-obj-$(CONFIG_EEPRO100_PCI) += eepro100.o
 267 hw-obj-$(CONFIG_PCNET_PCI) += pcnet-pci.o
 268 hw-obj-$(CONFIG_PCNET_COMMON) += pcnet.o
 269 hw-obj-$(CONFIG_E1000_PCI) += e1000.o
 270 hw-obj-$(CONFIG_RTL8139_PCI) += rtl8139.o
 271
 272 hw-obj-$(CONFIG_SMC91C111) += smc91c111.o
 273 hw-obj-$(CONFIG_LAN9118) += lan9118.o
 274 hw-obj-$(CONFIG_NE2000_ISA) += ne2000-isa.o
 275 hw-obj-$(CONFIG_OPENCORES_ETH) += opencores_eth.o
 276
 277 # IDE
 278 hw-obj-$(CONFIG_IDE_CORE) += ide/core.o ide/atapi.o
 279 hw-obj-$(CONFIG_IDE_QDEV) += ide/qdev.o
 280 hw-obj-$(CONFIG_IDE_PCI) += ide/pci.o
 281 hw-obj-$(CONFIG_IDE_ISA) += ide/isa.o
 282 hw-obj-$(CONFIG_IDE_PIIX) += ide/piix.o
 283 hw-obj-$(CONFIG_IDE_CMD646) += ide/cmd646.o
 284 hw-obj-$(CONFIG_IDE_MACIO) += ide/macio.o
 285 hw-obj-$(CONFIG_IDE_VIA) += ide/via.o
 286 hw-obj-$(CONFIG_AHCI) += ide/ahci.o
 287 hw-obj-$(CONFIG_AHCI) += ide/ich.o
 288
 289 # SCSI layer
 290 hw-obj-$(CONFIG_LSI_SCSI_PCI) += lsi53c895a.o
 291 hw-obj-$(CONFIG_ESP) += esp.o
 292
 293 hw-obj-y += dma-helpers.o sysbus.o isa-bus.o
 294 hw-obj-y += qdev-addr.o
 295
 296 # VGA
 297 hw-obj-$(CONFIG_VGA_PCI) += vga-pci.o
 298 hw-obj-$(CONFIG_VGA_ISA) += vga-isa.o
 299 hw-obj-$(CONFIG_VGA_ISA_MM) += vga-isa-mm.o
 300 hw-obj-$(CONFIG_VMWARE_VGA) += vmware_vga.o
 301 hw-obj-$(CONFIG_VMMOUSE) += vmmouse.o
 302 hw-obj-$(CONFIG_VGA_CIRRUS) += cirrus_vga.o
 303
 304 hw-obj-$(CONFIG_RC4030) += rc4030.o
 305 hw-obj-$(CONFIG_DP8393X) += dp8393x.o
 306 hw-obj-$(CONFIG_DS1225Y) += ds1225y.o
 307 hw-obj-$(CONFIG_MIPSNET) += mipsnet.o
 308
 309 # Sound
 310 sound-obj-y =
 311 sound-obj-$(CONFIG_SB16) += sb16.o
 312 sound-obj-$(CONFIG_ES1370) += es1370.o
 313 sound-obj-$(CONFIG_AC97) += ac97.o
 314 sound-obj-$(CONFIG_ADLIB) += fmopl.o adlib.o
 315 sound-obj-$(CONFIG_GUS) += gus.o gusemu_hal.o gusemu_mixer.o
 316 sound-obj-$(CONFIG_CS4231A) += cs4231a.o
 317 sound-obj-$(CONFIG_HDA) += intel-hda.o hda-audio.o
 318
 319 adlib.o fmopl.o: QEMU_CFLAGS += -DBUILD_Y8950=0
 320 hw-obj-$(CONFIG_SOUND) += $(sound-obj-y)
 321
 322 9pfs-nested-$(CONFIG_VIRTFS)  = virtio-9p.o
 323 9pfs-nested-$(CONFIG_VIRTFS) += virtio-9p-local.o virtio-9p-xattr.o
 324 9pfs-nested-$(CONFIG_VIRTFS) += virtio-9p-xattr-user.o virtio-9p-posix-acl.o
 325 9pfs-nested-$(CONFIG_VIRTFS) += virtio-9p-coth.o cofs.o codir.o cofile.o
 326 9pfs-nested-$(CONFIG_VIRTFS) += coxattr.o virtio-9p-synth.o
 327 9pfs-nested-$(CONFIG_OPEN_BY_HANDLE) +=  virtio-9p-handle.o
 328 9pfs-nested-$(CONFIG_VIRTFS) += virtio-9p-proxy.o
 329
 330 hw-obj-$(CONFIG_REALLY_VIRTFS) += $(addprefix 9pfs/, $(9pfs-nested-y))
 331
 332 ######################################################################
 333 # libdis
 334 # NOTE: the disassembler code is only needed for debugging
 335
 336 libdis-y =
 337 libdis-$(CONFIG_ALPHA_DIS) += alpha-dis.o
 338 libdis-$(CONFIG_ARM_DIS) += arm-dis.o
 339 libdis-$(CONFIG_CRIS_DIS) += cris-dis.o
 340 libdis-$(CONFIG_HPPA_DIS) += hppa-dis.o
 341 libdis-$(CONFIG_I386_DIS) += i386-dis.o
 342 libdis-$(CONFIG_IA64_DIS) += ia64-dis.o
 343 libdis-$(CONFIG_M68K_DIS) += m68k-dis.o
 344 libdis-$(CONFIG_MICROBLAZE_DIS) += microblaze-dis.o
 345 libdis-$(CONFIG_MIPS_DIS) += mips-dis.o
 346 libdis-$(CONFIG_PPC_DIS) += ppc-dis.o
 347 libdis-$(CONFIG_S390_DIS) += s390-dis.o
 348 libdis-$(CONFIG_SH4_DIS) += sh4-dis.o
 349 libdis-$(CONFIG_SPARC_DIS) += sparc-dis.o
 350
 351 ######################################################################
 352 # trace
 353
 354 ifeq ($(TRACE_BACKEND),dtrace)
 355 trace.h: trace.h-timestamp trace-dtrace.h
 356 else
 357 trace.h: trace.h-timestamp
 358 endif
 359 trace.h-timestamp: $(SRC_PATH)/trace-events $(BUILD_DIR)/config-host.mak
 360         $(call quiet-command,sh $(SRC_PATH)/scripts/tracetool --$(TRACE_BACKEND) -h < $< > $@,"  GEN   trace.h")
 361         @cmp -s $@ trace.h || cp $@ trace.h
 362
 363 trace.c: trace.c-timestamp
 364 trace.c-timestamp: $(SRC_PATH)/trace-events $(BUILD_DIR)/config-host.mak
 365         $(call quiet-command,sh $(SRC_PATH)/scripts/tracetool --$(TRACE_BACKEND) -c < $< > $@,"  GEN   trace.c")
 366         @cmp -s $@ trace.c || cp $@ trace.c
 367
 368 trace.o: trace.c $(GENERATED_HEADERS)
 369
 370 trace-dtrace.h: trace-dtrace.dtrace
 371         $(call quiet-command,dtrace -o $@ -h -s $<, "  GEN   trace-dtrace.h")
 372
 373 # Normal practice is to name DTrace probe file with a '.d' extension
 374 # but that gets picked up by QEMU's Makefile as an external dependency
 375 # rule file. So we use '.dtrace' instead
 376 trace-dtrace.dtrace: trace-dtrace.dtrace-timestamp
 377 trace-dtrace.dtrace-timestamp: $(SRC_PATH)/trace-events $(BUILD_DIR)/config-host.mak
 378         $(call quiet-command,sh $(SRC_PATH)/scripts/tracetool --$(TRACE_BACKEND) -d < $< > $@,"  GEN   trace-dtrace.dtrace")
 379         @cmp -s $@ trace-dtrace.dtrace || cp $@ trace-dtrace.dtrace
 380
 381 trace-dtrace.o: trace-dtrace.dtrace $(GENERATED_HEADERS)
 382         $(call quiet-command,dtrace -o $@ -G -s $<, "  GEN trace-dtrace.o")
 383
 384 ifeq ($(LIBTOOL),)
 385 trace-dtrace.lo: trace-dtrace.dtrace
 386         @echo "missing libtool. please install and rerun configure."; exit 1
 387 else
 388 trace-dtrace.lo: trace-dtrace.dtrace
 389         $(call quiet-command,$(LIBTOOL) --mode=compile --tag=CC dtrace -o $@ -G -s $<, "  lt GEN trace-dtrace.o")
 390 endif
 391
 392 trace/simple.o: trace/simple.c $(GENERATED_HEADERS)
 393
 394 trace-obj-$(CONFIG_TRACE_DTRACE) += trace-dtrace.o
 395 ifneq ($(TRACE_BACKEND),dtrace)
 396 trace-obj-y = trace.o
 397 endif
 398
 399 trace-nested-$(CONFIG_TRACE_DEFAULT) += default.o
 400
 401 trace-nested-$(CONFIG_TRACE_SIMPLE) += simple.o
 402 trace-obj-$(CONFIG_TRACE_SIMPLE) += qemu-timer-common.o
 403
 404 trace-nested-$(CONFIG_TRACE_STDERR) += stderr.o
 405
 406 trace-nested-y += control.o
 407
 408 trace-obj-y += $(addprefix trace/, $(trace-nested-y))
 409
 410 $(trace-obj-y): $(GENERATED_HEADERS)
 411
 412 ######################################################################
 413 # smartcard
 414
 415 libcacard-y = cac.o event.o vcard.o vreader.o vcard_emul_nss.o vcard_emul_type.o card_7816.o
 416
 417 ######################################################################
 418 # qapi
 419
 420 qapi-nested-y = qapi-visit-core.o qapi-dealloc-visitor.o qmp-input-visitor.o
 421 qapi-nested-y += qmp-output-visitor.o qmp-registry.o qmp-dispatch.o
 422 qapi-nested-y += string-input-visitor.o string-output-visitor.o
 423 qapi-obj-y = $(addprefix qapi/, $(qapi-nested-y))
 424
 425 common-obj-y += qmp-marshal.o qapi-visit.o qapi-types.o $(qapi-obj-y)
 426 common-obj-y += qmp.o hmp.o
 427
 428 ######################################################################
 429 # guest agent
 430
 431 qga-nested-y = commands.o guest-agent-command-state.o
 432 qga-nested-$(CONFIG_POSIX) += commands-posix.o channel-posix.o
 433 qga-nested-$(CONFIG_WIN32) += commands-win32.o channel-win32.o service-win32.o
 434 qga-obj-y = $(addprefix qga/, $(qga-nested-y))
 435 qga-obj-y += qemu-ga.o module.o
 436 qga-obj-$(CONFIG_WIN32) += oslib-win32.o
 437 qga-obj-$(CONFIG_POSIX) += oslib-posix.o qemu-sockets.o qemu-option.o
 438
 439 vl.o: QEMU_CFLAGS+=$(GPROF_CFLAGS)
 440
 441 vl.o: QEMU_CFLAGS+=$(SDL_CFLAGS)
 442
 443 QEMU_CFLAGS+=$(GLIB_CFLAGS)
 444