2 This library is only intended to be used by UEFI network stack modules.
3 It provides basic functions for the UEFI network stack.
5 Copyright (c) 2005 - 2011, Intel Corporation. All rights reserved.<BR>
6 This program and the accompanying materials
7 are licensed and made available under the terms and conditions of the BSD License
8 which accompanies this distribution. The full text of the license may be found at<BR>
9 http://opensource.org/licenses/bsd-license.php
11 THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
12 WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
19 #include <Protocol/Ip6.h>
21 #include <Library/BaseLib.h>
22 #include <Library/BaseMemoryLib.h>
24 typedef UINT32 IP4_ADDR
;
25 typedef UINT32 TCP_SEQNO
;
26 typedef UINT16 TCP_PORTNO
;
29 #define NET_ETHER_ADDR_LEN 6
30 #define NET_IFTYPE_ETHERNET 0x01
32 #define NET_VLAN_TAG_LEN 4
33 #define ETHER_TYPE_VLAN 0x8100
35 #define EFI_IP_PROTO_UDP 0x11
36 #define EFI_IP_PROTO_TCP 0x06
37 #define EFI_IP_PROTO_ICMP 0x01
38 #define IP4_PROTO_IGMP 0x02
42 // The address classification
44 #define IP4_ADDR_CLASSA 1
45 #define IP4_ADDR_CLASSB 2
46 #define IP4_ADDR_CLASSC 3
47 #define IP4_ADDR_CLASSD 4
48 #define IP4_ADDR_CLASSE 5
50 #define IP4_MASK_NUM 33
51 #define IP6_PREFIX_NUM 129
53 #define IP6_HOP_BY_HOP 0
54 #define IP6_DESTINATION 60
55 #define IP6_ROUTING 43
56 #define IP6_FRAGMENT 44
59 #define IP6_NO_NEXT_HEADER 59
61 #define IP_VERSION_4 4
62 #define IP_VERSION_6 6
64 #define IP6_PREFIX_LENGTH 64
69 // Ethernet head definition
72 UINT8 DstMac
[NET_ETHER_ADDR_LEN
];
73 UINT8 SrcMac
[NET_ETHER_ADDR_LEN
];
78 // 802.1Q VLAN Tag Control Information
82 UINT16 Vid
: 12; // Unique VLAN identifier (0 to 4094)
83 UINT16 Cfi
: 1; // Canonical Format Indicator
84 UINT16 Priority
: 3; // 802.1Q priority level (0 to 7)
89 #define VLAN_TCI_CFI_CANONICAL_MAC 0
90 #define VLAN_TCI_CFI_NON_CANONICAL_MAC 1
93 // The EFI_IP4_HEADER is hard to use because the source and
94 // destination address are defined as EFI_IPv4_ADDRESS, which
95 // is a structure. Two structures can't be compared or masked
96 // directly. This is why there is an internal representation.
114 // ICMP head definition. Each ICMP message is categorized as either an error
115 // message or query message. Two message types have their own head format.
125 UINT32 Fourth
; // 4th filed of the head, it depends on Type.
127 } IP4_ICMP_ERROR_HEAD
;
133 } IP4_ICMP_QUERY_HEAD
;
144 EFI_IP6_HEADER IpHead
;
145 } IP6_ICMP_ERROR_HEAD
;
150 } IP6_ICMP_INFORMATION_HEAD
;
153 // UDP header definition
163 // TCP header definition
180 #define NET_MAC_EQUAL(pMac1, pMac2, Len) \
181 (CompareMem ((pMac1), (pMac2), Len) == 0)
183 #define NET_MAC_IS_MULTICAST(Mac, BMac, Len) \
184 (((*((UINT8 *) Mac) & 0x01) == 0x01) && (!NET_MAC_EQUAL (Mac, BMac, Len)))
186 #define NTOHL(x) SwapBytes32 (x)
188 #define HTONL(x) NTOHL(x)
190 #define NTOHS(x) SwapBytes16 (x)
192 #define HTONS(x) NTOHS(x)
193 #define NTOHLL(x) SwapBytes64 (x)
194 #define HTONLL(x) NTOHLL(x)
195 #define NTOHLLL(x) Ip6Swap128 (x)
196 #define HTONLLL(x) NTOHLLL(x)
199 // Test the IP's attribute, All the IPs are in host byte order.
201 #define IP4_IS_MULTICAST(Ip) (((Ip) & 0xF0000000) == 0xE0000000)
202 #define IP4_IS_LOCAL_BROADCAST(Ip) ((Ip) == 0xFFFFFFFF)
203 #define IP4_NET_EQUAL(Ip1, Ip2, NetMask) (((Ip1) & (NetMask)) == ((Ip2) & (NetMask)))
204 #define IP4_IS_VALID_NETMASK(Ip) (NetGetMaskLength (Ip) != IP4_MASK_NUM)
206 #define IP6_IS_MULTICAST(Ip6) (((Ip6)->Addr[0]) == 0xFF)
209 // Convert the EFI_IP4_ADDRESS to plain UINT32 IP4 address.
211 #define EFI_IP4(EfiIpAddr) (*(IP4_ADDR *) ((EfiIpAddr).Addr))
212 #define EFI_NTOHL(EfiIp) (NTOHL (EFI_IP4 ((EfiIp))))
213 #define EFI_IP4_EQUAL(Ip1, Ip2) (CompareMem ((Ip1), (Ip2), sizeof (EFI_IPv4_ADDRESS)) == 0)
215 #define EFI_IP6_EQUAL(Ip1, Ip2) (CompareMem ((Ip1), (Ip2), sizeof (EFI_IPv6_ADDRESS)) == 0)
217 #define IP4_COPY_ADDRESS(Dest, Src) (CopyMem ((Dest), (Src), sizeof (EFI_IPv4_ADDRESS)))
218 #define IP6_COPY_ADDRESS(Dest, Src) (CopyMem ((Dest), (Src), sizeof (EFI_IPv6_ADDRESS)))
219 #define IP6_COPY_LINK_ADDRESS(Mac1, Mac2) (CopyMem ((Mac1), (Mac2), sizeof (EFI_MAC_ADDRESS)))
222 // The debug level definition. This value is also used as the
223 // syslog's servity level. Don't change it.
225 #define NETDEBUG_LEVEL_TRACE 5
226 #define NETDEBUG_LEVEL_WARNING 4
227 #define NETDEBUG_LEVEL_ERROR 3
230 // Network debug message is sent out as syslog packet.
232 #define NET_SYSLOG_FACILITY 16 // Syslog local facility local use
233 #define NET_SYSLOG_PACKET_LEN 512
234 #define NET_SYSLOG_TX_TIMEOUT (500 * 1000 * 10) // 500ms
235 #define NET_DEBUG_MSG_LEN 470 // 512 - (ether+ip4+udp4 head length)
238 // The debug output expects the ASCII format string, Use %a to print ASCII
239 // string, and %s to print UNICODE string. PrintArg must be enclosed in ().
240 // For example: NET_DEBUG_TRACE ("Tcp", ("State transit to %a\n", Name));
242 #define NET_DEBUG_TRACE(Module, PrintArg) \
244 NETDEBUG_LEVEL_TRACE, \
248 NetDebugASPrint PrintArg \
251 #define NET_DEBUG_WARNING(Module, PrintArg) \
253 NETDEBUG_LEVEL_WARNING, \
257 NetDebugASPrint PrintArg \
260 #define NET_DEBUG_ERROR(Module, PrintArg) \
262 NETDEBUG_LEVEL_ERROR, \
266 NetDebugASPrint PrintArg \
270 Allocate a buffer, then format the message to it. This is a
271 help function for the NET_DEBUG_XXX macros. The PrintArg of
272 these macros treats the variable length print parameters as a
273 single parameter, and pass it to the NetDebugASPrint. For
274 example, NET_DEBUG_TRACE ("Tcp", ("State transit to %a\n", Name))
278 NETDEBUG_LEVEL_TRACE,
282 NetDebugASPrint ("State transit to %a\n", Name)
285 @param Format The ASCII format string.
286 @param ... The variable length parameter whose format is determined
287 by the Format string.
289 @return The buffer containing the formatted message,
290 or NULL if memory allocation failed.
301 Builds an UDP4 syslog packet and send it using SNP.
303 This function will locate a instance of SNP then send the message through it.
304 Because it isn't open the SNP BY_DRIVER, apply caution when using it.
306 @param Level The servity level of the message.
307 @param Module The Moudle that generates the log.
308 @param File The file that contains the log.
309 @param Line The exact line that contains the log.
310 @param Message The user message to log.
312 @retval EFI_INVALID_PARAMETER Any input parameter is invalid.
313 @retval EFI_OUT_OF_RESOURCES Failed to allocate memory for the packet
314 @retval EFI_SUCCESS The log is discard because that it is more verbose
315 than the mNetDebugLevelMax. Or, it has been sent out.
329 Return the length of the mask.
331 Return the length of the mask. Valid values are 0 to 32.
332 If the mask is invalid, return the invalid length 33, which is IP4_MASK_NUM.
333 NetMask is in the host byte order.
335 @param[in] NetMask The netmask to get the length from.
337 @return The length of the netmask, or IP4_MASK_NUM (33) if the mask is invalid.
347 Return the class of the IP address, such as class A, B, C.
348 Addr is in host byte order.
350 The address of class A starts with 0.
351 If the address belong to class A, return IP4_ADDR_CLASSA.
352 The address of class B starts with 10.
353 If the address belong to class B, return IP4_ADDR_CLASSB.
354 The address of class C starts with 110.
355 If the address belong to class C, return IP4_ADDR_CLASSC.
356 The address of class D starts with 1110.
357 If the address belong to class D, return IP4_ADDR_CLASSD.
358 The address of class E starts with 1111.
359 If the address belong to class E, return IP4_ADDR_CLASSE.
362 @param[in] Addr The address to get the class from.
364 @return IP address class, such as IP4_ADDR_CLASSA.
374 Check whether the IP is a valid unicast address according to
375 the netmask. If NetMask is zero, use the IP address's class to get the default mask.
377 If Ip is 0, IP is not a valid unicast address.
378 Class D address is used for multicasting and class E address is reserved for future. If Ip
379 belongs to class D or class E, Ip is not a valid unicast address.
380 If all bits of the host address of Ip are 0 or 1, Ip is not a valid unicast address.
382 @param[in] Ip The IP to check against.
383 @param[in] NetMask The mask of the IP.
385 @return TRUE if Ip is a valid unicast address on the network, otherwise FALSE.
396 Check whether the incoming IPv6 address is a valid unicast address.
398 If the address is a multicast address has binary 0xFF at the start, it is not
399 a valid unicast address. If the address is unspecified ::, it is not a valid
400 unicast address to be assigned to any node. If the address is loopback address
401 ::1, it is also not a valid unicast address to be assigned to any physical
404 @param[in] Ip6 The IPv6 address to check against.
406 @return TRUE if Ip6 is a valid unicast address on the network, otherwise FALSE.
411 NetIp6IsValidUnicast (
412 IN EFI_IPv6_ADDRESS
*Ip6
417 Check whether the incoming Ipv6 address is the unspecified address or not.
419 @param[in] Ip6 - Ip6 address, in network order.
421 @retval TRUE - Yes, incoming Ipv6 address is the unspecified address.
422 @retval FALSE - The incoming Ipv6 address is not the unspecified address
427 NetIp6IsUnspecifiedAddr (
428 IN EFI_IPv6_ADDRESS
*Ip6
432 Check whether the incoming Ipv6 address is a link-local address.
434 @param[in] Ip6 - Ip6 address, in network order.
436 @retval TRUE - The incoming Ipv6 address is a link-local address.
437 @retval FALSE - The incoming Ipv6 address is not a link-local address.
442 NetIp6IsLinkLocalAddr (
443 IN EFI_IPv6_ADDRESS
*Ip6
447 Check whether the Ipv6 address1 and address2 are on the connected network.
449 @param[in] Ip1 - Ip6 address1, in network order.
450 @param[in] Ip2 - Ip6 address2, in network order.
451 @param[in] PrefixLength - The prefix length of the checking net.
453 @retval TRUE - Yes, the Ipv6 address1 and address2 are connected.
454 @retval FALSE - No the Ipv6 address1 and address2 are not connected.
460 EFI_IPv6_ADDRESS
*Ip1
,
461 EFI_IPv6_ADDRESS
*Ip2
,
466 Switches the endianess of an IPv6 address.
468 This function swaps the bytes in a 128-bit IPv6 address to switch the value
469 from little endian to big endian or vice versa. The byte swapped value is
472 @param Ip6 Points to an IPv6 address.
474 @return The byte swapped IPv6 address.
480 EFI_IPv6_ADDRESS
*Ip6
483 extern IP4_ADDR gIp4AllMasks
[IP4_MASK_NUM
];
486 extern EFI_IPv4_ADDRESS mZeroIp4Addr
;
488 #define NET_IS_DIGIT(Ch) (('0' <= (Ch)) && ((Ch) <= '9'))
489 #define NET_ROUNDUP(size, unit) (((size) + (unit) - 1) & (~((unit) - 1)))
490 #define NET_IS_LOWER_CASE_CHAR(Ch) (('a' <= (Ch)) && ((Ch) <= 'z'))
491 #define NET_IS_UPPER_CASE_CHAR(Ch) (('A' <= (Ch)) && ((Ch) <= 'Z'))
493 #define TICKS_PER_MS 10000U
494 #define TICKS_PER_SECOND 10000000U
496 #define NET_RANDOM(Seed) ((UINT32) ((UINT32) (Seed) * 1103515245UL + 12345) % 4294967295UL)
499 Extract a UINT32 from a byte stream.
501 This function copies a UINT32 from a byte stream, and then converts it from Network
502 byte order to host byte order. Use this function to avoid alignment error.
504 @param[in] Buf The buffer to extract the UINT32.
506 @return The UINT32 extracted.
516 Puts a UINT32 into the byte stream in network byte order.
518 Converts a UINT32 from host byte order to network byte order, then copies it to the
521 @param[in, out] Buf The buffer in which to put the UINT32.
522 @param[in] Data The data to be converted and put into the byte stream.
533 Initialize a random seed using current time.
535 Get current time first. Then initialize a random seed based on some basic
536 mathematical operations on the hour, day, minute, second, nanosecond and year
539 @return The random seed, initialized with current time.
549 #define NET_LIST_USER_STRUCT(Entry, Type, Field) \
550 BASE_CR(Entry, Type, Field)
552 #define NET_LIST_USER_STRUCT_S(Entry, Type, Field, Sig) \
553 CR(Entry, Type, Field, Sig)
556 // Iterate through the double linked list. It is NOT delete safe
558 #define NET_LIST_FOR_EACH(Entry, ListHead) \
559 for(Entry = (ListHead)->ForwardLink; Entry != (ListHead); Entry = Entry->ForwardLink)
562 // Iterate through the double linked list. This is delete-safe.
563 // Don't touch NextEntry. Also, don't use this macro if list
564 // entries other than the Entry may be deleted when processing
565 // the current Entry.
567 #define NET_LIST_FOR_EACH_SAFE(Entry, NextEntry, ListHead) \
568 for(Entry = (ListHead)->ForwardLink, NextEntry = Entry->ForwardLink; \
569 Entry != (ListHead); \
570 Entry = NextEntry, NextEntry = Entry->ForwardLink \
574 // Make sure the list isn't empty before getting the first/last record.
576 #define NET_LIST_HEAD(ListHead, Type, Field) \
577 NET_LIST_USER_STRUCT((ListHead)->ForwardLink, Type, Field)
579 #define NET_LIST_TAIL(ListHead, Type, Field) \
580 NET_LIST_USER_STRUCT((ListHead)->BackLink, Type, Field)
584 Remove the first node entry on the list, and return the removed node entry.
586 Removes the first node entry from a doubly linked list. It is up to the caller of
587 this function to release the memory used by the first node, if that is required. On
588 exit, the removed node is returned.
590 If Head is NULL, then ASSERT().
591 If Head was not initialized, then ASSERT().
592 If PcdMaximumLinkedListLength is not zero, and the number of nodes in the
593 linked list including the head node is greater than or equal to PcdMaximumLinkedListLength,
596 @param[in, out] Head The list header.
598 @return The first node entry that is removed from the list, NULL if the list is empty.
604 IN OUT LIST_ENTRY
*Head
608 Remove the last node entry on the list and return the removed node entry.
610 Removes the last node entry from a doubly linked list. It is up to the caller of
611 this function to release the memory used by the first node, if that is required. On
612 exit, the removed node is returned.
614 If Head is NULL, then ASSERT().
615 If Head was not initialized, then ASSERT().
616 If PcdMaximumLinkedListLength is not zero, and the number of nodes in the
617 linked list including the head node is greater than or equal to PcdMaximumLinkedListLength,
620 @param[in, out] Head The list head.
622 @return The last node entry that is removed from the list, NULL if the list is empty.
628 IN OUT LIST_ENTRY
*Head
632 Insert a new node entry after a designated node entry of a doubly linked list.
634 Inserts a new node entry designated by NewEntry after the node entry designated by PrevEntry
635 of the doubly linked list.
637 @param[in, out] PrevEntry The entry after which to insert.
638 @param[in, out] NewEntry The new entry to insert.
644 IN OUT LIST_ENTRY
*PrevEntry
,
645 IN OUT LIST_ENTRY
*NewEntry
649 Insert a new node entry before a designated node entry of a doubly linked list.
651 Inserts a new node entry designated by NewEntry before the node entry designated by PostEntry
652 of the doubly linked list.
654 @param[in, out] PostEntry The entry to insert before.
655 @param[in, out] NewEntry The new entry to insert.
660 NetListInsertBefore (
661 IN OUT LIST_ENTRY
*PostEntry
,
662 IN OUT LIST_ENTRY
*NewEntry
667 // Object container: EFI network stack spec defines various kinds of
668 // tokens. The drivers can share code to manage those objects.
682 #define NET_MAP_INCREAMENT 64
685 Initialize the netmap. Netmap is a reposity to keep the <Key, Value> pairs.
687 Initialize the forward and backward links of two head nodes donated by Map->Used
688 and Map->Recycled of two doubly linked lists.
689 Initializes the count of the <Key, Value> pairs in the netmap to zero.
691 If Map is NULL, then ASSERT().
692 If the address of Map->Used is NULL, then ASSERT().
693 If the address of Map->Recycled is NULl, then ASSERT().
695 @param[in, out] Map The netmap to initialize.
705 To clean up the netmap, that is, release allocated memories.
707 Removes all nodes of the Used doubly linked list and frees memory of all related netmap items.
708 Removes all nodes of the Recycled doubly linked list and free memory of all related netmap items.
709 The number of the <Key, Value> pairs in the netmap is set to zero.
711 If Map is NULL, then ASSERT().
713 @param[in, out] Map The netmap to clean up.
723 Test whether the netmap is empty and return true if it is.
725 If the number of the <Key, Value> pairs in the netmap is zero, return TRUE.
727 If Map is NULL, then ASSERT().
730 @param[in] Map The net map to test.
732 @return TRUE if the netmap is empty, otherwise FALSE.
742 Return the number of the <Key, Value> pairs in the netmap.
744 @param[in] Map The netmap to get the entry number.
746 @return The entry number in the netmap.
756 Allocate an item to save the <Key, Value> pair to the head of the netmap.
758 Allocate an item to save the <Key, Value> pair and add corresponding node entry
759 to the beginning of the Used doubly linked list. The number of the <Key, Value>
760 pairs in the netmap increase by 1.
762 If Map is NULL, then ASSERT().
764 @param[in, out] Map The netmap to insert into.
765 @param[in] Key The user's key.
766 @param[in] Value The user's value for the key.
768 @retval EFI_OUT_OF_RESOURCES Failed to allocate the memory for the item.
769 @retval EFI_SUCCESS The item is inserted to the head.
777 IN VOID
*Value OPTIONAL
781 Allocate an item to save the <Key, Value> pair to the tail of the netmap.
783 Allocate an item to save the <Key, Value> pair and add corresponding node entry
784 to the tail of the Used doubly linked list. The number of the <Key, Value>
785 pairs in the netmap increase by 1.
787 If Map is NULL, then ASSERT().
789 @param[in, out] Map The netmap to insert into.
790 @param[in] Key The user's key.
791 @param[in] Value The user's value for the key.
793 @retval EFI_OUT_OF_RESOURCES Failed to allocate the memory for the item.
794 @retval EFI_SUCCESS The item is inserted to the tail.
802 IN VOID
*Value OPTIONAL
806 Finds the key in the netmap and returns the point to the item containing the Key.
808 Iterate the Used doubly linked list of the netmap to get every item. Compare the key of every
809 item with the key to search. It returns the point to the item contains the Key if found.
811 If Map is NULL, then ASSERT().
813 @param[in] Map The netmap to search within.
814 @param[in] Key The key to search.
816 @return The point to the item contains the Key, or NULL if Key isn't in the map.
827 Remove the node entry of the item from the netmap and return the key of the removed item.
829 Remove the node entry of the item from the Used doubly linked list of the netmap.
830 The number of the <Key, Value> pairs in the netmap decrease by 1. Then add the node
831 entry of the item to the Recycled doubly linked list of the netmap. If Value is not NULL,
832 Value will point to the value of the item. It returns the key of the removed item.
834 If Map is NULL, then ASSERT().
835 If Item is NULL, then ASSERT().
836 if item in not in the netmap, then ASSERT().
838 @param[in, out] Map The netmap to remove the item from.
839 @param[in, out] Item The item to remove.
840 @param[out] Value The variable to receive the value if not NULL.
842 @return The key of the removed item.
849 IN OUT NET_MAP_ITEM
*Item
,
850 OUT VOID
**Value OPTIONAL
854 Remove the first node entry on the netmap and return the key of the removed item.
856 Remove the first node entry from the Used doubly linked list of the netmap.
857 The number of the <Key, Value> pairs in the netmap decrease by 1. Then add the node
858 entry to the Recycled doubly linked list of the netmap. If parameter Value is not NULL,
859 parameter Value will point to the value of the item. It returns the key of the removed item.
861 If Map is NULL, then ASSERT().
862 If the Used doubly linked list is empty, then ASSERT().
864 @param[in, out] Map The netmap to remove the head from.
865 @param[out] Value The variable to receive the value if not NULL.
867 @return The key of the item removed.
874 OUT VOID
**Value OPTIONAL
878 Remove the last node entry on the netmap and return the key of the removed item.
880 Remove the last node entry from the Used doubly linked list of the netmap.
881 The number of the <Key, Value> pairs in the netmap decrease by 1. Then add the node
882 entry to the Recycled doubly linked list of the netmap. If parameter Value is not NULL,
883 parameter Value will point to the value of the item. It returns the key of the removed item.
885 If Map is NULL, then ASSERT().
886 If the Used doubly linked list is empty, then ASSERT().
888 @param[in, out] Map The netmap to remove the tail from.
889 @param[out] Value The variable to receive the value if not NULL.
891 @return The key of the item removed.
898 OUT VOID
**Value OPTIONAL
903 (EFIAPI
*NET_MAP_CALLBACK
) (
905 IN NET_MAP_ITEM
*Item
,
910 Iterate through the netmap and call CallBack for each item.
912 It will contiue the traverse if CallBack returns EFI_SUCCESS, otherwise, break
913 from the loop. It returns the CallBack's last return value. This function is
914 delete safe for the current item.
916 If Map is NULL, then ASSERT().
917 If CallBack is NULL, then ASSERT().
919 @param[in] Map The Map to iterate through.
920 @param[in] CallBack The callback function to call for each item.
921 @param[in] Arg The opaque parameter to the callback.
923 @retval EFI_SUCCESS There is no item in the netmap, or CallBack for each item
925 @retval Others It returns the CallBack's last return value.
932 IN NET_MAP_CALLBACK CallBack
,
933 IN VOID
*Arg OPTIONAL
938 // Helper functions to implement driver binding and service binding protocols.
941 Create a child of the service that is identified by ServiceBindingGuid.
943 Get the ServiceBinding Protocol first, then use it to create a child.
945 If ServiceBindingGuid is NULL, then ASSERT().
946 If ChildHandle is NULL, then ASSERT().
948 @param[in] Controller The controller which has the service installed.
949 @param[in] Image The image handle used to open service.
950 @param[in] ServiceBindingGuid The service's Guid.
951 @param[in, out] ChildHandle The handle to receive the created child.
953 @retval EFI_SUCCESS The child was successfully created.
954 @retval Others Failed to create the child.
959 NetLibCreateServiceChild (
960 IN EFI_HANDLE Controller
,
962 IN EFI_GUID
*ServiceBindingGuid
,
963 IN OUT EFI_HANDLE
*ChildHandle
967 Destroy a child of the service that is identified by ServiceBindingGuid.
969 Get the ServiceBinding Protocol first, then use it to destroy a child.
971 If ServiceBindingGuid is NULL, then ASSERT().
973 @param[in] Controller The controller which has the service installed.
974 @param[in] Image The image handle used to open service.
975 @param[in] ServiceBindingGuid The service's Guid.
976 @param[in] ChildHandle The child to destroy.
978 @retval EFI_SUCCESS The child was destroyed.
979 @retval Others Failed to destroy the child.
984 NetLibDestroyServiceChild (
985 IN EFI_HANDLE Controller
,
987 IN EFI_GUID
*ServiceBindingGuid
,
988 IN EFI_HANDLE ChildHandle
992 Get handle with Simple Network Protocol installed on it.
994 There should be MNP Service Binding Protocol installed on the input ServiceHandle.
995 If Simple Network Protocol is already installed on the ServiceHandle, the
996 ServiceHandle will be returned. If SNP is not installed on the ServiceHandle,
997 try to find its parent handle with SNP installed.
999 @param[in] ServiceHandle The handle where network service binding protocols are
1001 @param[out] Snp The pointer to store the address of the SNP instance.
1002 This is an optional parameter that may be NULL.
1004 @return The SNP handle, or NULL if not found.
1009 NetLibGetSnpHandle (
1010 IN EFI_HANDLE ServiceHandle
,
1011 OUT EFI_SIMPLE_NETWORK_PROTOCOL
**Snp OPTIONAL
1015 Retrieve VLAN ID of a VLAN device handle.
1017 Search VLAN device path node in Device Path of specified ServiceHandle and
1018 return its VLAN ID. If no VLAN device path node found, then this ServiceHandle
1019 is not a VLAN device handle, and 0 will be returned.
1021 @param[in] ServiceHandle The handle where network service binding protocols are
1024 @return VLAN ID of the device handle, or 0 if not a VLAN device.
1030 IN EFI_HANDLE ServiceHandle
1034 Find VLAN device handle with specified VLAN ID.
1036 The VLAN child device handle is created by VLAN Config Protocol on ControllerHandle.
1037 This function will append VLAN device path node to the parent device path,
1038 and then use LocateDevicePath() to find the correct VLAN device handle.
1040 @param[in] ControllerHandle The handle where network service binding protocols are
1042 @param[in] VlanId The configured VLAN ID for the VLAN device.
1044 @return The VLAN device handle, or NULL if not found.
1049 NetLibGetVlanHandle (
1050 IN EFI_HANDLE ControllerHandle
,
1055 Get MAC address associated with the network service handle.
1057 There should be MNP Service Binding Protocol installed on the input ServiceHandle.
1058 If SNP is installed on the ServiceHandle or its parent handle, MAC address will
1059 be retrieved from SNP. If no SNP found, try to get SNP mode data use MNP.
1061 @param[in] ServiceHandle The handle where network service binding protocols are
1063 @param[out] MacAddress The pointer to store the returned MAC address.
1064 @param[out] AddressSize The length of returned MAC address.
1066 @retval EFI_SUCCESS MAC address was returned successfully.
1067 @retval Others Failed to get SNP mode data.
1072 NetLibGetMacAddress (
1073 IN EFI_HANDLE ServiceHandle
,
1074 OUT EFI_MAC_ADDRESS
*MacAddress
,
1075 OUT UINTN
*AddressSize
1079 Convert MAC address of the NIC associated with specified Service Binding Handle
1080 to a unicode string. Callers are responsible for freeing the string storage.
1082 Locate simple network protocol associated with the Service Binding Handle and
1083 get the mac address from SNP. Then convert the mac address into a unicode
1084 string. It takes 2 unicode characters to represent a 1 byte binary buffer.
1085 Plus one unicode character for the null-terminator.
1087 @param[in] ServiceHandle The handle where network service binding protocol is
1089 @param[in] ImageHandle The image handle used to act as the agent handle to
1090 get the simple network protocol.
1091 @param[out] MacString The pointer to store the address of the string
1092 representation of the mac address.
1094 @retval EFI_SUCCESS Converted the mac address a unicode string successfully.
1095 @retval EFI_OUT_OF_RESOURCES There are not enough memory resources.
1096 @retval Others Failed to open the simple network protocol.
1101 NetLibGetMacString (
1102 IN EFI_HANDLE ServiceHandle
,
1103 IN EFI_HANDLE ImageHandle
,
1104 OUT CHAR16
**MacString
1108 Detect media status for specified network device.
1110 The underlying UNDI driver may or may not support reporting media status from
1111 GET_STATUS command (PXE_STATFLAGS_GET_STATUS_NO_MEDIA_SUPPORTED). This routine
1112 will try to invoke Snp->GetStatus() to get the media status. If media is already
1113 present, it returns directly. If media is not present, it will stop SNP and then
1114 restart SNP to get the latest media status. This provides an opportunity to get
1115 the correct media status for old UNDI driver, which doesn't support reporting
1116 media status from GET_STATUS command.
1117 Note: there are two limitations for the current algorithm:
1118 1) For UNDI with this capability, when the cable is not attached, there will
1119 be an redundant Stop/Start() process.
1120 2) for UNDI without this capability, in case that network cable is attached when
1121 Snp->Initialize() is invoked while network cable is unattached later,
1122 NetLibDetectMedia() will report MediaPresent as TRUE, causing upper layer
1123 apps to wait for timeout time.
1125 @param[in] ServiceHandle The handle where network service binding protocols are
1127 @param[out] MediaPresent The pointer to store the media status.
1129 @retval EFI_SUCCESS Media detection success.
1130 @retval EFI_INVALID_PARAMETER ServiceHandle is not a valid network device handle.
1131 @retval EFI_UNSUPPORTED The network device does not support media detection.
1132 @retval EFI_DEVICE_ERROR SNP is in an unknown state.
1138 IN EFI_HANDLE ServiceHandle
,
1139 OUT BOOLEAN
*MediaPresent
1143 Create an IPv4 device path node.
1145 The header type of IPv4 device path node is MESSAGING_DEVICE_PATH.
1146 The header subtype of IPv4 device path node is MSG_IPv4_DP.
1147 The length of the IPv4 device path node in bytes is 19.
1148 Get other information from parameters to make up the whole IPv4 device path node.
1150 @param[in, out] Node The pointer to the IPv4 device path node.
1151 @param[in] Controller The controller handle.
1152 @param[in] LocalIp The local IPv4 address.
1153 @param[in] LocalPort The local port.
1154 @param[in] RemoteIp The remote IPv4 address.
1155 @param[in] RemotePort The remote port.
1156 @param[in] Protocol The protocol type in the IP header.
1157 @param[in] UseDefaultAddress Whether this instance is using default address or not.
1162 NetLibCreateIPv4DPathNode (
1163 IN OUT IPv4_DEVICE_PATH
*Node
,
1164 IN EFI_HANDLE Controller
,
1165 IN IP4_ADDR LocalIp
,
1166 IN UINT16 LocalPort
,
1167 IN IP4_ADDR RemoteIp
,
1168 IN UINT16 RemotePort
,
1170 IN BOOLEAN UseDefaultAddress
1174 Create an IPv6 device path node.
1176 The header type of IPv6 device path node is MESSAGING_DEVICE_PATH.
1177 The header subtype of IPv6 device path node is MSG_IPv6_DP.
1178 The length of the IPv6 device path node in bytes is 43.
1179 Get other information from parameters to make up the whole IPv6 device path node.
1181 @param[in, out] Node The pointer to the IPv6 device path node.
1182 @param[in] Controller The controller handle.
1183 @param[in] LocalIp The local IPv6 address.
1184 @param[in] LocalPort The local port.
1185 @param[in] RemoteIp The remote IPv6 address.
1186 @param[in] RemotePort The remote port.
1187 @param[in] Protocol The protocol type in the IP header.
1192 NetLibCreateIPv6DPathNode (
1193 IN OUT IPv6_DEVICE_PATH
*Node
,
1194 IN EFI_HANDLE Controller
,
1195 IN EFI_IPv6_ADDRESS
*LocalIp
,
1196 IN UINT16 LocalPort
,
1197 IN EFI_IPv6_ADDRESS
*RemoteIp
,
1198 IN UINT16 RemotePort
,
1204 Find the UNDI/SNP handle from controller and protocol GUID.
1206 For example, IP will open an MNP child to transmit/receive
1207 packets. When MNP is stopped, IP should also be stopped. IP
1208 needs to find its own private data that is related the IP's
1209 service binding instance that is installed on the UNDI/SNP handle.
1210 The controller is then either an MNP or an ARP child handle. Note that
1211 IP opens these handles using BY_DRIVER. Use that infomation to get the
1214 @param[in] Controller The protocol handle to check.
1215 @param[in] ProtocolGuid The protocol that is related with the handle.
1217 @return The UNDI/SNP handle or NULL for errors.
1222 NetLibGetNicHandle (
1223 IN EFI_HANDLE Controller
,
1224 IN EFI_GUID
*ProtocolGuid
1228 This is the default unload handle for all the network drivers.
1230 Disconnect the driver specified by ImageHandle from all the devices in the handle database.
1231 Uninstall all the protocols installed in the driver entry point.
1233 @param[in] ImageHandle The drivers' driver image.
1235 @retval EFI_SUCCESS The image is unloaded.
1236 @retval Others Failed to unload the image.
1241 NetLibDefaultUnload (
1242 IN EFI_HANDLE ImageHandle
1246 Convert one Null-terminated ASCII string (decimal dotted) to EFI_IPv4_ADDRESS.
1248 @param[in] String The pointer to the Ascii string.
1249 @param[out] Ip4Address The pointer to the converted IPv4 address.
1251 @retval EFI_SUCCESS Converted to an IPv4 address successfully.
1252 @retval EFI_INVALID_PARAMETER The string is malformated, or Ip4Address is NULL.
1257 NetLibAsciiStrToIp4 (
1258 IN CONST CHAR8
*String
,
1259 OUT EFI_IPv4_ADDRESS
*Ip4Address
1263 Convert one Null-terminated ASCII string to EFI_IPv6_ADDRESS. The format of the
1264 string is defined in RFC 4291 - Text Pepresentation of Addresses.
1266 @param[in] String The pointer to the Ascii string.
1267 @param[out] Ip6Address The pointer to the converted IPv6 address.
1269 @retval EFI_SUCCESS Converted to an IPv6 address successfully.
1270 @retval EFI_INVALID_PARAMETER The string is malformated, or Ip6Address is NULL.
1275 NetLibAsciiStrToIp6 (
1276 IN CONST CHAR8
*String
,
1277 OUT EFI_IPv6_ADDRESS
*Ip6Address
1281 Convert one Null-terminated Unicode string (decimal dotted) to EFI_IPv4_ADDRESS.
1283 @param[in] String The pointer to the Ascii string.
1284 @param[out] Ip4Address The pointer to the converted IPv4 address.
1286 @retval EFI_SUCCESS Converted to an IPv4 address successfully.
1287 @retval EFI_INVALID_PARAMETER The string is mal-formated or Ip4Address is NULL.
1288 @retval EFI_OUT_OF_RESOURCES Failed to perform the operation due to lack of resources.
1294 IN CONST CHAR16
*String
,
1295 OUT EFI_IPv4_ADDRESS
*Ip4Address
1299 Convert one Null-terminated Unicode string to EFI_IPv6_ADDRESS. The format of
1300 the string is defined in RFC 4291 - Text Pepresentation of Addresses.
1302 @param[in] String The pointer to the Ascii string.
1303 @param[out] Ip6Address The pointer to the converted IPv6 address.
1305 @retval EFI_SUCCESS Converted to an IPv6 address successfully.
1306 @retval EFI_INVALID_PARAMETER The string is malformated or Ip6Address is NULL.
1307 @retval EFI_OUT_OF_RESOURCES Failed to perform the operation due to a lack of resources.
1313 IN CONST CHAR16
*String
,
1314 OUT EFI_IPv6_ADDRESS
*Ip6Address
1318 Convert one Null-terminated Unicode string to EFI_IPv6_ADDRESS and prefix length.
1319 The format of the string is defined in RFC 4291 - Text Pepresentation of Addresses
1320 Prefixes: ipv6-address/prefix-length.
1322 @param[in] String The pointer to the Ascii string.
1323 @param[out] Ip6Address The pointer to the converted IPv6 address.
1324 @param[out] PrefixLength The pointer to the converted prefix length.
1326 @retval EFI_SUCCESS Converted to an IPv6 address successfully.
1327 @retval EFI_INVALID_PARAMETER The string is malformated, or Ip6Address is NULL.
1328 @retval EFI_OUT_OF_RESOURCES Failed to perform the operation due to a lack of resources.
1333 NetLibStrToIp6andPrefix (
1334 IN CONST CHAR16
*String
,
1335 OUT EFI_IPv6_ADDRESS
*Ip6Address
,
1336 OUT UINT8
*PrefixLength
1340 // Various signatures
1342 #define NET_BUF_SIGNATURE SIGNATURE_32 ('n', 'b', 'u', 'f')
1343 #define NET_VECTOR_SIGNATURE SIGNATURE_32 ('n', 'v', 'e', 'c')
1344 #define NET_QUE_SIGNATURE SIGNATURE_32 ('n', 'b', 'q', 'u')
1347 #define NET_PROTO_DATA 64 // Opaque buffer for protocols
1348 #define NET_BUF_HEAD 1 // Trim or allocate space from head
1349 #define NET_BUF_TAIL 0 // Trim or allocate space from tail
1350 #define NET_VECTOR_OWN_FIRST 0x01 // We allocated the 1st block in the vector
1352 #define NET_CHECK_SIGNATURE(PData, SIGNATURE) \
1353 ASSERT (((PData) != NULL) && ((PData)->Signature == (SIGNATURE)))
1356 // Single memory block in the vector.
1359 UINT32 Len
; // The block's length
1360 UINT8
*Bulk
; // The block's Data
1363 typedef VOID (EFIAPI
*NET_VECTOR_EXT_FREE
) (VOID
*Arg
);
1366 //NET_VECTOR contains several blocks to hold all packet's
1367 //fragments and other house-keeping stuff for sharing. It
1368 //doesn't specify the where actual packet fragment begins.
1372 INTN RefCnt
; // Reference count to share NET_VECTOR.
1373 NET_VECTOR_EXT_FREE Free
; // external function to free NET_VECTOR
1374 VOID
*Arg
; // opeque argument to Free
1375 UINT32 Flag
; // Flags, NET_VECTOR_OWN_FIRST
1376 UINT32 Len
; // Total length of the assocated BLOCKs
1383 //NET_BLOCK_OP operates on the NET_BLOCK. It specifies
1384 //where the actual fragment begins and ends
1387 UINT8
*BlockHead
; // Block's head, or the smallest valid Head
1388 UINT8
*BlockTail
; // Block's tail. BlockTail-BlockHead=block length
1389 UINT8
*Head
; // 1st byte of the data in the block
1390 UINT8
*Tail
; // Tail of the data in the block, Tail-Head=Size
1391 UINT32 Size
; // The size of the data
1396 EFI_IP6_HEADER
*Ip6
;
1400 //NET_BUF is the buffer manage structure used by the
1401 //network stack. Every network packet may be fragmented. The Vector points to
1402 //memory blocks used by each fragment, and BlockOp
1403 //specifies where each fragment begins and ends.
1405 //It also contains an opaque area for the protocol to store
1406 //per-packet information. Protocol must be careful not
1407 //to overwrite the members after that.
1412 LIST_ENTRY List
; // The List this NET_BUF is on
1414 NET_IP_HEAD Ip
; // Network layer header, for fast access
1415 TCP_HEAD
*Tcp
; // Transport layer header, for fast access
1416 EFI_UDP_HEADER
*Udp
; // User Datagram Protocol header
1417 UINT8 ProtoData
[NET_PROTO_DATA
]; //Protocol specific data
1419 NET_VECTOR
*Vector
; // The vector containing the packet
1421 UINT32 BlockOpNum
; // Total number of BlockOp in the buffer
1422 UINT32 TotalSize
; // Total size of the actual packet
1423 NET_BLOCK_OP BlockOp
[1]; // Specify the position of actual packet
1427 //A queue of NET_BUFs. It is a thin extension of
1428 //NET_BUF functions.
1433 LIST_ENTRY List
; // The List this buffer queue is on
1435 LIST_ENTRY BufList
; // list of queued buffers
1436 UINT32 BufSize
; // total length of DATA in the buffers
1437 UINT32 BufNum
; // total number of buffers on the chain
1441 // Pseudo header for TCP and UDP checksum
1453 EFI_IPv6_ADDRESS SrcIp
;
1454 EFI_IPv6_ADDRESS DstIp
;
1457 UINT32 NextHeader
:8;
1458 } NET_IP6_PSEUDO_HDR
;
1462 // The fragment entry table used in network interfaces. This is
1463 // the same as NET_BLOCK now. Use two different to distinguish
1464 // the two in case that NET_BLOCK be enhanced later.
1471 #define NET_GET_REF(PData) ((PData)->RefCnt++)
1472 #define NET_PUT_REF(PData) ((PData)->RefCnt--)
1473 #define NETBUF_FROM_PROTODATA(Info) BASE_CR((Info), NET_BUF, ProtoData)
1475 #define NET_BUF_SHARED(Buf) \
1476 (((Buf)->RefCnt > 1) || ((Buf)->Vector->RefCnt > 1))
1478 #define NET_VECTOR_SIZE(BlockNum) \
1479 (sizeof (NET_VECTOR) + ((BlockNum) - 1) * sizeof (NET_BLOCK))
1481 #define NET_BUF_SIZE(BlockOpNum) \
1482 (sizeof (NET_BUF) + ((BlockOpNum) - 1) * sizeof (NET_BLOCK_OP))
1484 #define NET_HEADSPACE(BlockOp) \
1485 (UINTN)((BlockOp)->Head - (BlockOp)->BlockHead)
1487 #define NET_TAILSPACE(BlockOp) \
1488 (UINTN)((BlockOp)->BlockTail - (BlockOp)->Tail)
1491 Allocate a single block NET_BUF. Upon allocation, all the
1492 free space is in the tail room.
1494 @param[in] Len The length of the block.
1496 @return The pointer to the allocated NET_BUF, or NULL if the
1497 allocation failed due to resource limitations.
1507 Free the net buffer and its associated NET_VECTOR.
1509 Decrease the reference count of the net buffer by one. Free the associated net
1510 vector and itself if the reference count of the net buffer is decreased to 0.
1511 The net vector free operation decreases the reference count of the net
1512 vector by one, and performs the resource free operation when the reference count
1513 of the net vector is 0.
1515 @param[in] Nbuf The pointer to the NET_BUF to be freed.
1525 Get the index of NET_BLOCK_OP that contains the byte at Offset in the net
1528 For example, this function can be used to retrieve the IP header in the packet. It
1529 also can be used to get the fragment that contains the byte used
1530 mainly by the library implementation itself.
1532 @param[in] Nbuf The pointer to the net buffer.
1533 @param[in] Offset The offset of the byte.
1534 @param[out] Index Index of the NET_BLOCK_OP that contains the byte at
1537 @return The pointer to the Offset'th byte of data in the net buffer, or NULL
1538 if there is no such data in the net buffer.
1546 OUT UINT32
*Index OPTIONAL
1550 Create a copy of the net buffer that shares the associated net vector.
1552 The reference count of the newly created net buffer is set to 1. The reference
1553 count of the associated net vector is increased by one.
1555 @param[in] Nbuf The pointer to the net buffer to be cloned.
1557 @return The pointer to the cloned net buffer, or NULL if the
1558 allocation failed due to resource limitations.
1568 Create a duplicated copy of the net buffer with data copied and HeadSpace
1569 bytes of head space reserved.
1571 The duplicated net buffer will allocate its own memory to hold the data of the
1574 @param[in] Nbuf The pointer to the net buffer to be duplicated from.
1575 @param[in, out] Duplicate The pointer to the net buffer to duplicate to. If
1576 NULL, a new net buffer is allocated.
1577 @param[in] HeadSpace The length of the head space to reserve.
1579 @return The pointer to the duplicated net buffer, or NULL if
1580 the allocation failed due to resource limitations.
1587 IN OUT NET_BUF
*Duplicate OPTIONAL
,
1592 Create a NET_BUF structure which contains Len byte data of Nbuf starting from
1595 A new NET_BUF structure will be created but the associated data in NET_VECTOR
1596 is shared. This function exists to perform IP packet fragmentation.
1598 @param[in] Nbuf The pointer to the net buffer to be extracted.
1599 @param[in] Offset Starting point of the data to be included in the new
1601 @param[in] Len The bytes of data to be included in the new net buffer.
1602 @param[in] HeadSpace The bytes of the head space to reserve for the protocol header.
1604 @return The pointer to the cloned net buffer, or NULL if the
1605 allocation failed due to resource limitations.
1618 Reserve some space in the header room of the net buffer.
1620 Upon allocation, all the space is in the tail room of the buffer. Call this
1621 function to move space to the header room. This function is quite limited
1622 in that it can only reserve space from the first block of an empty NET_BUF not
1623 built from the external. However, it should be enough for the network stack.
1625 @param[in, out] Nbuf The pointer to the net buffer.
1626 @param[in] Len The length of buffer to be reserved from the header.
1632 IN OUT NET_BUF
*Nbuf
,
1637 Allocate Len bytes of space from the header or tail of the buffer.
1639 @param[in, out] Nbuf The pointer to the net buffer.
1640 @param[in] Len The length of the buffer to be allocated.
1641 @param[in] FromHead The flag to indicate whether to reserve the data
1642 from head (TRUE) or tail (FALSE).
1644 @return The pointer to the first byte of the allocated buffer,
1645 or NULL, if there is no sufficient space.
1651 IN OUT NET_BUF
*Nbuf
,
1657 Trim Len bytes from the header or the tail of the net buffer.
1659 @param[in, out] Nbuf The pointer to the net buffer.
1660 @param[in] Len The length of the data to be trimmed.
1661 @param[in] FromHead The flag to indicate whether trim data is from the
1662 head (TRUE) or the tail (FALSE).
1664 @return The length of the actual trimmed data, which may be less
1665 than Len if the TotalSize of Nbuf is less than Len.
1671 IN OUT NET_BUF
*Nbuf
,
1677 Copy Len bytes of data from the specific offset of the net buffer to the
1680 The Len bytes of data may cross several fragments of the net buffer.
1682 @param[in] Nbuf The pointer to the net buffer.
1683 @param[in] Offset The sequence number of the first byte to copy.
1684 @param[in] Len The length of the data to copy.
1685 @param[in] Dest The destination of the data to copy to.
1687 @return The length of the actual copied data, or 0 if the offset
1688 specified exceeds the total size of net buffer.
1701 Build a NET_BUF from external blocks.
1703 A new NET_BUF structure will be created from external blocks. An additional block
1704 of memory will be allocated to hold reserved HeadSpace bytes of header room
1705 and existing HeadLen bytes of header, but the external blocks are shared by the
1706 net buffer to avoid data copying.
1708 @param[in] ExtFragment The pointer to the data block.
1709 @param[in] ExtNum The number of the data blocks.
1710 @param[in] HeadSpace The head space to be reserved.
1711 @param[in] HeadLen The length of the protocol header. The function
1712 pulls this amount of data into a linear block.
1713 @param[in] ExtFree The pointer to the caller-provided free function.
1714 @param[in] Arg The argument passed to ExtFree when ExtFree is
1717 @return The pointer to the net buffer built from the data blocks,
1718 or NULL if the allocation failed due to resource
1725 IN NET_FRAGMENT
*ExtFragment
,
1727 IN UINT32 HeadSpace
,
1729 IN NET_VECTOR_EXT_FREE ExtFree
,
1730 IN VOID
*Arg OPTIONAL
1734 Build a fragment table to contain the fragments in the net buffer. This is the
1735 opposite operation of the NetbufFromExt.
1737 @param[in] Nbuf Points to the net buffer.
1738 @param[in, out] ExtFragment The pointer to the data block.
1739 @param[in, out] ExtNum The number of the data blocks.
1741 @retval EFI_BUFFER_TOO_SMALL The number of non-empty blocks is bigger than
1743 @retval EFI_SUCCESS The fragment table was built successfully.
1750 IN OUT NET_FRAGMENT
*ExtFragment
,
1751 IN OUT UINT32
*ExtNum
1755 Build a net buffer from a list of net buffers.
1757 All the fragments will be collected from the list of NEW_BUF, and then a new
1758 net buffer will be created through NetbufFromExt.
1760 @param[in] BufList A List of the net buffer.
1761 @param[in] HeadSpace The head space to be reserved.
1762 @param[in] HeaderLen The length of the protocol header. The function
1763 pulls this amount of data into a linear block.
1764 @param[in] ExtFree The pointer to the caller provided free function.
1765 @param[in] Arg The argument passed to ExtFree when ExtFree is called.
1767 @return The pointer to the net buffer built from the list of net
1774 IN LIST_ENTRY
*BufList
,
1775 IN UINT32 HeadSpace
,
1776 IN UINT32 HeaderLen
,
1777 IN NET_VECTOR_EXT_FREE ExtFree
,
1778 IN VOID
*Arg OPTIONAL
1782 Free a list of net buffers.
1784 @param[in, out] Head The pointer to the head of linked net buffers.
1790 IN OUT LIST_ENTRY
*Head
1794 Initiate the net buffer queue.
1796 @param[in, out] NbufQue The pointer to the net buffer queue to be initialized.
1802 IN OUT NET_BUF_QUEUE
*NbufQue
1806 Allocate and initialize a net buffer queue.
1808 @return The pointer to the allocated net buffer queue, or NULL if the
1809 allocation failed due to resource limit.
1819 Free a net buffer queue.
1821 Decrease the reference count of the net buffer queue by one. The real resource
1822 free operation isn't performed until the reference count of the net buffer
1823 queue is decreased to 0.
1825 @param[in] NbufQue The pointer to the net buffer queue to be freed.
1831 IN NET_BUF_QUEUE
*NbufQue
1835 Remove a net buffer from the head in the specific queue and return it.
1837 @param[in, out] NbufQue The pointer to the net buffer queue.
1839 @return The pointer to the net buffer removed from the specific queue,
1840 or NULL if there is no net buffer in the specific queue.
1846 IN OUT NET_BUF_QUEUE
*NbufQue
1850 Append a net buffer to the net buffer queue.
1852 @param[in, out] NbufQue The pointer to the net buffer queue.
1853 @param[in, out] Nbuf The pointer to the net buffer to be appended.
1859 IN OUT NET_BUF_QUEUE
*NbufQue
,
1860 IN OUT NET_BUF
*Nbuf
1864 Copy Len bytes of data from the net buffer queue at the specific offset to the
1867 The copying operation is the same as NetbufCopy, but applies to the net buffer
1868 queue instead of the net buffer.
1870 @param[in] NbufQue The pointer to the net buffer queue.
1871 @param[in] Offset The sequence number of the first byte to copy.
1872 @param[in] Len The length of the data to copy.
1873 @param[out] Dest The destination of the data to copy to.
1875 @return The length of the actual copied data, or 0 if the offset
1876 specified exceeds the total size of net buffer queue.
1882 IN NET_BUF_QUEUE
*NbufQue
,
1889 Trim Len bytes of data from the buffer queue and free any net buffer
1890 that is completely trimmed.
1892 The trimming operation is the same as NetbufTrim but applies to the net buffer
1893 queue instead of the net buffer.
1895 @param[in, out] NbufQue The pointer to the net buffer queue.
1896 @param[in] Len The length of the data to trim.
1898 @return The actual length of the data trimmed.
1904 IN OUT NET_BUF_QUEUE
*NbufQue
,
1910 Flush the net buffer queue.
1912 @param[in, out] NbufQue The pointer to the queue to be flushed.
1918 IN OUT NET_BUF_QUEUE
*NbufQue
1922 Compute the checksum for a bulk of data.
1924 @param[in] Bulk The pointer to the data.
1925 @param[in] Len The length of the data, in bytes.
1927 @return The computed checksum.
1940 @param[in] Checksum1 The first checksum to be added.
1941 @param[in] Checksum2 The second checksum to be added.
1943 @return The new checksum.
1949 IN UINT16 Checksum1
,
1954 Compute the checksum for a NET_BUF.
1956 @param[in] Nbuf The pointer to the net buffer.
1958 @return The computed checksum.
1968 Compute the checksum for TCP/UDP pseudo header.
1970 Src and Dst are in network byte order, and Len is in host byte order.
1972 @param[in] Src The source address of the packet.
1973 @param[in] Dst The destination address of the packet.
1974 @param[in] Proto The protocol type of the packet.
1975 @param[in] Len The length of the packet.
1977 @return The computed checksum.
1982 NetPseudoHeadChecksum (
1990 Compute the checksum for the TCP6/UDP6 pseudo header.
1992 Src and Dst are in network byte order, and Len is in host byte order.
1994 @param[in] Src The source address of the packet.
1995 @param[in] Dst The destination address of the packet.
1996 @param[in] NextHeader The protocol type of the packet.
1997 @param[in] Len The length of the packet.
1999 @return The computed checksum.
2004 NetIp6PseudoHeadChecksum (
2005 IN EFI_IPv6_ADDRESS
*Src
,
2006 IN EFI_IPv6_ADDRESS
*Dst
,
2007 IN UINT8 NextHeader
,
2012 The function frees the net buffer which allocated by the IP protocol. It releases
2013 only the net buffer and doesn't call the external free function.
2015 This function should be called after finishing the process of mIpSec->ProcessExt()
2016 for outbound traffic. The (EFI_IPSEC2_PROTOCOL)->ProcessExt() allocates a new
2017 buffer for the ESP, so there needs a function to free the old net buffer.
2019 @param[in] Nbuf The network buffer to be freed.
2023 NetIpSecNetbufFree (
2028 This function obtains the system guid from the smbios table.
2030 @param[out] SystemGuid The pointer of the returned system guid.
2032 @retval EFI_SUCCESS Successfully obtained the system guid.
2033 @retval EFI_NOT_FOUND Did not find the SMBIOS table.
2038 NetLibGetSystemGuid (
2039 OUT EFI_GUID
*SystemGuid