]> git.proxmox.com Git - mirror_edk2.git/blob - MdeModulePkg/Include/Protocol/SwapAddressRange.h
MdeModulePkg: Clean up source files
[mirror_edk2.git] / MdeModulePkg / Include / Protocol / SwapAddressRange.h
1 /** @file
2 The EFI_SWAP_ADDRESS_RANGE_PROTOCOL is used to abstract the swap operation of boot block
3 and backup block of FV. This swap is especially needed when updating the boot block of FV. If a
4 power failure happens during the boot block update, the swapped backup block (now the boot block)
5 can boot the machine with the old boot block backed up in it. The swap operation is platform dependent, so
6 other protocols such as FTW (Fault Tolerant Write) should use this protocol instead of handling hardware directly.
7
8 Copyright (c) 2009 - 2018, Intel Corporation. All rights reserved.<BR>
9 This program and the accompanying materials are licensed and made available under
10 the terms and conditions of the BSD License that accompanies this distribution.
11 The full text of the license may be found at
12 http://opensource.org/licenses/bsd-license.php.
13
14 THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
15 WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
16
17 **/
18
19 #ifndef _EFI_SWAP_ADDRESS_RANGE_PROTOCOL_H_
20 #define _EFI_SWAP_ADDRESS_RANGE_PROTOCOL_H_
21
22 #define EFI_SWAP_ADDRESS_RANGE_PROTOCOL_GUID \
23 { \
24 0x1259f60d, 0xb754, 0x468e, {0xa7, 0x89, 0x4d, 0xb8, 0x5d, 0x55, 0xe8, 0x7e } \
25 }
26
27 //
28 // Forward reference for pure ANSI compatability
29 //
30 typedef struct _EFI_SWAP_ADDRESS_RANGE_PROTOCOL EFI_SWAP_ADDRESS_RANGE_PROTOCOL;
31
32 #define EFI_UNSUPPORT_LOCK 0
33 #define EFI_SOFTWARE_LOCK 1
34 #define EFI_HARDWARE_LOCK 2
35
36 typedef UINT8 EFI_SWAP_LOCK_CAPABILITY;
37
38 //
39 // Protocol APIs
40 //
41
42 /**
43 This function gets the address range location of
44 boot block and backup block.
45
46 @param This Indicates the calling context.
47 @param BootBlockBase The base address of current boot block.
48 @param BootBlockSize The size (in bytes) of current boot block.
49 @param BackupBlockBase The base address of current backup block.
50 @param BackupBlockSize The size (in bytes) of current backup block.
51
52 @retval EFI_SUCCESS The call was successful.
53
54 **/
55 typedef
56 EFI_STATUS
57 (EFIAPI *EFI_GET_RANGE_LOCATION)(
58 IN EFI_SWAP_ADDRESS_RANGE_PROTOCOL *This,
59 OUT EFI_PHYSICAL_ADDRESS *BootBlockBase,
60 OUT UINTN *BootBlockSize,
61 OUT EFI_PHYSICAL_ADDRESS *BackupBlockBase,
62 OUT UINTN *BackupBlockSize
63 );
64
65 /**
66 This service checks if the boot block and backup block has been swapped.
67
68 @param This Indicates the calling context.
69 @param SwapState True if the boot block and backup block has been swapped.
70 False if the boot block and backup block has not been swapped.
71
72 @retval EFI_SUCCESS The call was successful.
73
74 **/
75 typedef
76 EFI_STATUS
77 (EFIAPI *EFI_GET_SWAP_STATE)(
78 IN EFI_SWAP_ADDRESS_RANGE_PROTOCOL *This,
79 OUT BOOLEAN *SwapState
80 );
81
82 /**
83 This service swaps the boot block and backup block, or swaps them back.
84
85 It also acquires and releases software swap lock during operation. The setting of the new swap state
86 is not affected by the old swap state.
87
88 @param This Indicates the calling context.
89 @param NewSwapState True to swap real boot block and backup block, False to swap them back.
90
91 @retval EFI_SUCCESS The call was successful.
92 @retval EFI_ABORTED Set swap state error.
93
94 **/
95 typedef
96 EFI_STATUS
97 (EFIAPI *EFI_SET_SWAP_STATE)(
98 IN EFI_SWAP_ADDRESS_RANGE_PROTOCOL *This,
99 IN BOOLEAN NewSwapState
100 );
101
102
103
104 /**
105 This service checks if a Real Time Clock (RTC) power failure happened.
106
107 If parameter RtcPowerFailed is true after the function returns, RTC power supply failed or was removed.
108 It is recommended to check RTC power status before calling GetSwapState().
109
110 @param This Indicates the calling context.
111 @param RtcPowerFailed True if the RTC (Real Time Clock) power failed or was removed.
112
113 @retval EFI_SUCCESS The call was successful.
114
115 **/
116 typedef
117 EFI_STATUS
118 (EFIAPI *EFI_GET_RTC_POWER_STATUS)(
119 IN EFI_SWAP_ADDRESS_RANGE_PROTOCOL *This,
120 OUT BOOLEAN *RtcPowerFailed
121 );
122
123 /**
124 This service returns all lock methods for swap operations that the current platform
125 supports. Could be software lock, hardware lock, or unsupport lock.
126 Note that software and hardware lock methods can be used simultaneously.
127
128 @param This Indicates the calling context.
129 @param LockCapability The current lock method for swap operations.
130
131 @retval EFI_SUCCESS The call was successful.
132
133 **/
134 typedef
135 EFI_STATUS
136 (EFIAPI *EFI_GET_SWAP_LOCK_CAPABILITY)(
137 IN EFI_SWAP_ADDRESS_RANGE_PROTOCOL *This,
138 OUT EFI_SWAP_LOCK_CAPABILITY *LockCapability
139 );
140
141
142
143 /**
144 This service is used to acquire or release appointed kind of lock for Swap Address Range operations.
145
146 Note that software and hardware lock mothod can be used simultaneously.
147
148 @param This Indicates the calling context.
149 @param LockCapability Indicates which lock to acquire or release.
150 @param NewLockState True to acquire lock; False to release lock.
151
152 @retval EFI_SUCCESS The call was successful.
153
154 **/
155 typedef
156 EFI_STATUS
157 (EFIAPI *EFI_SET_SWAP_LOCK)(
158 IN EFI_SWAP_ADDRESS_RANGE_PROTOCOL *This,
159 IN EFI_SWAP_LOCK_CAPABILITY LockCapability,
160 IN BOOLEAN NewLockState
161 );
162
163 struct _EFI_SWAP_ADDRESS_RANGE_PROTOCOL {
164 EFI_GET_RANGE_LOCATION GetRangeLocation; // has output parameters for base and length
165 EFI_GET_SWAP_STATE GetSwapState; // are ranges swapped or not
166 EFI_SET_SWAP_STATE SetSwapState; // swap or unswap ranges
167 EFI_GET_RTC_POWER_STATUS GetRtcPowerStatus; // checks RTC battery, or whatever...
168 EFI_GET_SWAP_LOCK_CAPABILITY GetSwapLockCapability; // Get TOP_SWAP lock capability,
169 EFI_SET_SWAP_LOCK SetSwapLock; // Set TOP_SWAP lock state
170 };
171
172 extern EFI_GUID gEfiSwapAddressRangeProtocolGuid;
173
174 #endif