2 Provides services to create and parse HOBs. Only available for PEI
5 The HOB Library supports the efficient creation and searching of HOBs
6 defined in the PI Specification.
7 A HOB is a Hand-Off Block, defined in the Framework architecture, that
8 allows the PEI phase to pass information to the DXE phase. HOBs are position
9 independent and can be relocated easily to different memory memory locations.
11 Copyright (c) 2006 - 2011, Intel Corporation. All rights reserved.<BR>
12 This program and the accompanying materials
13 are licensed and made available under the terms and conditions of the BSD License
14 which accompanies this distribution. The full text of the license may be found at
15 http://opensource.org/licenses/bsd-license.php
17 THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
18 WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
26 Returns the pointer to the HOB list.
28 This function returns the pointer to first HOB in the list.
29 For PEI phase, the PEI service GetHobList() can be used to retrieve the pointer
30 to the HOB list. For the DXE phase, the HOB list pointer can be retrieved through
31 the EFI System Table by looking up theHOB list GUID in the System Configuration Table.
32 Since the System Configuration Table does not exist that the time the DXE Core is
33 launched, the DXE Core uses a global variable from the DXE Core Entry Point Library
34 to manage the pointer to the HOB list.
36 If the pointer to the HOB list is NULL, then ASSERT().
38 @return The pointer to the HOB list.
48 Returns the next instance of a HOB type from the starting HOB.
50 This function searches the first instance of a HOB type from the starting HOB pointer.
51 If there does not exist such HOB type from the starting HOB pointer, it will return NULL.
52 In contrast with macro GET_NEXT_HOB(), this function does not skip the starting HOB pointer
53 unconditionally: it returns HobStart back if HobStart itself meets the requirement;
54 caller is required to use GET_NEXT_HOB() if it wishes to skip current HobStart.
56 If HobStart is NULL, then ASSERT().
58 @param Type The HOB type to return.
59 @param HobStart The starting HOB pointer to search from.
61 @return The next instance of a HOB type from the starting HOB.
68 IN CONST VOID
*HobStart
72 Returns the first instance of a HOB type among the whole HOB list.
74 This function searches the first instance of a HOB type among the whole HOB list.
75 If there does not exist such HOB type in the HOB list, it will return NULL.
77 If the pointer to the HOB list is NULL, then ASSERT().
79 @param Type The HOB type to return.
81 @return The next instance of a HOB type from the starting HOB.
91 Returns the next instance of the matched GUID HOB from the starting HOB.
93 This function searches the first instance of a HOB from the starting HOB pointer.
94 Such HOB should satisfy two conditions:
95 its HOB type is EFI_HOB_TYPE_GUID_EXTENSION and its GUID Name equals to the input Guid.
96 If there does not exist such HOB from the starting HOB pointer, it will return NULL.
97 Caller is required to apply GET_GUID_HOB_DATA () and GET_GUID_HOB_DATA_SIZE ()
98 to extract the data section and its size info respectively.
99 In contrast with macro GET_NEXT_HOB(), this function does not skip the starting HOB pointer
100 unconditionally: it returns HobStart back if HobStart itself meets the requirement;
101 caller is required to use GET_NEXT_HOB() if it wishes to skip current HobStart.
103 If Guid is NULL, then ASSERT().
104 If HobStart is NULL, then ASSERT().
106 @param Guid The GUID to match with in the HOB list.
107 @param HobStart A pointer to a Guid.
109 @return The next instance of the matched GUID HOB from the starting HOB.
115 IN CONST EFI_GUID
*Guid
,
116 IN CONST VOID
*HobStart
120 Returns the first instance of the matched GUID HOB among the whole HOB list.
122 This function searches the first instance of a HOB among the whole HOB list.
123 Such HOB should satisfy two conditions:
124 its HOB type is EFI_HOB_TYPE_GUID_EXTENSION and its GUID Name equals to the input Guid.
125 If there does not exist such HOB from the starting HOB pointer, it will return NULL.
126 Caller is required to apply GET_GUID_HOB_DATA () and GET_GUID_HOB_DATA_SIZE ()
127 to extract the data section and its size info respectively.
129 If the pointer to the HOB list is NULL, then ASSERT().
130 If Guid is NULL, then ASSERT().
132 @param Guid The GUID to match with in the HOB list.
134 @return The first instance of the matched GUID HOB among the whole HOB list.
140 IN CONST EFI_GUID
*Guid
144 Get the system boot mode from the HOB list.
146 This function returns the system boot mode information from the
147 PHIT HOB in HOB list.
149 If the pointer to the HOB list is NULL, then ASSERT().
153 @return The Boot Mode.
163 Builds a HOB for a loaded PE32 module.
165 This function builds a HOB for a loaded PE32 module.
166 It can only be invoked during PEI phase;
167 for DXE phase, it will ASSERT() since PEI HOB is read-only for DXE phase.
169 If ModuleName is NULL, then ASSERT().
170 If there is no additional space for HOB creation, then ASSERT().
172 @param ModuleName The GUID File Name of the module.
173 @param MemoryAllocationModule The 64 bit physical address of the module.
174 @param ModuleLength The length of the module in bytes.
175 @param EntryPoint The 64 bit physical address of the module entry point.
181 IN CONST EFI_GUID
*ModuleName
,
182 IN EFI_PHYSICAL_ADDRESS MemoryAllocationModule
,
183 IN UINT64 ModuleLength
,
184 IN EFI_PHYSICAL_ADDRESS EntryPoint
188 Builds a HOB that describes a chunk of system memory.
190 This function builds a HOB that describes a chunk of system memory.
191 It can only be invoked during PEI phase;
192 for DXE phase, it will ASSERT() since PEI HOB is read-only for DXE phase.
194 If there is no additional space for HOB creation, then ASSERT().
196 @param ResourceType The type of resource described by this HOB.
197 @param ResourceAttribute The resource attributes of the memory described by this HOB.
198 @param PhysicalStart The 64 bit physical address of memory described by this HOB.
199 @param NumberOfBytes The length of the memory described by this HOB in bytes.
204 BuildResourceDescriptorHob (
205 IN EFI_RESOURCE_TYPE ResourceType
,
206 IN EFI_RESOURCE_ATTRIBUTE_TYPE ResourceAttribute
,
207 IN EFI_PHYSICAL_ADDRESS PhysicalStart
,
208 IN UINT64 NumberOfBytes
212 Builds a customized HOB tagged with a GUID for identification and returns
213 the start address of GUID HOB data.
215 This function builds a customized HOB tagged with a GUID for identification
216 and returns the start address of GUID HOB data so that caller can fill the customized data.
217 The HOB Header and Name field is already stripped.
218 It can only be invoked during PEI phase;
219 for DXE phase, it will ASSERT() since PEI HOB is read-only for DXE phase.
221 If Guid is NULL, then ASSERT().
222 If there is no additional space for HOB creation, then ASSERT().
223 If DataLength >= (0x10000 - sizeof (EFI_HOB_GUID_TYPE)), then ASSERT().
225 @param Guid The GUID to tag the customized HOB.
226 @param DataLength The size of the data payload for the GUID HOB.
228 @retval NULL The GUID HOB could not be allocated.
229 @retval others The start address of GUID HOB data.
235 IN CONST EFI_GUID
*Guid
,
240 Builds a customized HOB tagged with a GUID for identification, copies the input data to the HOB
241 data field, and returns the start address of the GUID HOB data.
243 This function builds a customized HOB tagged with a GUID for identification and copies the input
244 data to the HOB data field and returns the start address of the GUID HOB data. It can only be
245 invoked during PEI phase; for DXE phase, it will ASSERT() since PEI HOB is read-only for DXE phase.
246 The HOB Header and Name field is already stripped.
247 It can only be invoked during PEI phase;
248 for DXE phase, it will ASSERT() since PEI HOB is read-only for DXE phase.
250 If Guid is NULL, then ASSERT().
251 If Data is NULL and DataLength > 0, then ASSERT().
252 If there is no additional space for HOB creation, then ASSERT().
253 If DataLength >= (0x10000 - sizeof (EFI_HOB_GUID_TYPE)), then ASSERT().
255 @param Guid The GUID to tag the customized HOB.
256 @param Data The data to be copied into the data field of the GUID HOB.
257 @param DataLength The size of the data payload for the GUID HOB.
259 @retval NULL The GUID HOB could not be allocated.
260 @retval others The start address of GUID HOB data.
266 IN CONST EFI_GUID
*Guid
,
272 Builds a Firmware Volume HOB.
274 This function builds a Firmware Volume HOB.
275 It can only be invoked during PEI phase;
276 for DXE phase, it will ASSERT() since PEI HOB is read-only for DXE phase.
278 If there is no additional space for HOB creation, then ASSERT().
280 @param BaseAddress The base address of the Firmware Volume.
281 @param Length The size of the Firmware Volume in bytes.
287 IN EFI_PHYSICAL_ADDRESS BaseAddress
,
292 Builds a EFI_HOB_TYPE_FV2 HOB.
294 This function builds a EFI_HOB_TYPE_FV2 HOB.
295 It can only be invoked during PEI phase;
296 for DXE phase, it will ASSERT() since PEI HOB is read-only for DXE phase.
298 If there is no additional space for HOB creation, then ASSERT().
300 @param BaseAddress The base address of the Firmware Volume.
301 @param Length The size of the Firmware Volume in bytes.
302 @param FvName The name of the Firmware Volume.
303 @param FileName The name of the file.
309 IN EFI_PHYSICAL_ADDRESS BaseAddress
,
311 IN CONST EFI_GUID
*FvName
,
312 IN CONST EFI_GUID
*FileName
316 Builds a Capsule Volume HOB.
318 This function builds a Capsule Volume HOB.
319 It can only be invoked during PEI phase;
320 for DXE phase, it will ASSERT() since PEI HOB is read-only for DXE phase.
322 If the platform does not support Capsule Volume HOBs, then ASSERT().
323 If there is no additional space for HOB creation, then ASSERT().
325 @param BaseAddress The base address of the Capsule Volume.
326 @param Length The size of the Capsule Volume in bytes.
332 IN EFI_PHYSICAL_ADDRESS BaseAddress
,
337 Builds a HOB for the CPU.
339 This function builds a HOB for the CPU.
340 It can only be invoked during PEI phase;
341 for DXE phase, it will ASSERT() since PEI HOB is read-only for DXE phase.
343 If there is no additional space for HOB creation, then ASSERT().
345 @param SizeOfMemorySpace The maximum physical memory addressability of the processor.
346 @param SizeOfIoSpace The maximum physical I/O addressability of the processor.
352 IN UINT8 SizeOfMemorySpace
,
353 IN UINT8 SizeOfIoSpace
357 Builds a HOB for the Stack.
359 This function builds a HOB for the stack.
360 It can only be invoked during PEI phase;
361 for DXE phase, it will ASSERT() since PEI HOB is read-only for DXE phase.
363 If there is no additional space for HOB creation, then ASSERT().
365 @param BaseAddress The 64 bit physical address of the Stack.
366 @param Length The length of the stack in bytes.
372 IN EFI_PHYSICAL_ADDRESS BaseAddress
,
377 Builds a HOB for the BSP store.
379 This function builds a HOB for BSP store.
380 It can only be invoked during PEI phase;
381 for DXE phase, it will ASSERT() since PEI HOB is read-only for DXE phase.
383 If there is no additional space for HOB creation, then ASSERT().
385 @param BaseAddress The 64 bit physical address of the BSP.
386 @param Length The length of the BSP store in bytes.
387 @param MemoryType Type of memory allocated by this HOB.
393 IN EFI_PHYSICAL_ADDRESS BaseAddress
,
395 IN EFI_MEMORY_TYPE MemoryType
399 Builds a HOB for the memory allocation.
401 This function builds a HOB for the memory allocation.
402 It can only be invoked during PEI phase;
403 for DXE phase, it will ASSERT() since PEI HOB is read-only for DXE phase.
405 If there is no additional space for HOB creation, then ASSERT().
407 @param BaseAddress The 64 bit physical address of the memory.
408 @param Length The length of the memory allocation in bytes.
409 @param MemoryType Type of memory allocated by this HOB.
414 BuildMemoryAllocationHob (
415 IN EFI_PHYSICAL_ADDRESS BaseAddress
,
417 IN EFI_MEMORY_TYPE MemoryType
421 Returns the type of a HOB.
423 This macro returns the HobType field from the HOB header for the
424 HOB specified by HobStart.
426 @param HobStart A pointer to a HOB.
431 #define GET_HOB_TYPE(HobStart) \
432 ((*(EFI_HOB_GENERIC_HEADER **)&(HobStart))->HobType)
435 Returns the length, in bytes, of a HOB.
437 This macro returns the HobLength field from the HOB header for the
438 HOB specified by HobStart.
440 @param HobStart A pointer to a HOB.
445 #define GET_HOB_LENGTH(HobStart) \
446 ((*(EFI_HOB_GENERIC_HEADER **)&(HobStart))->HobLength)
449 Returns a pointer to the next HOB in the HOB list.
451 This macro returns a pointer to HOB that follows the
452 HOB specified by HobStart in the HOB List.
454 @param HobStart A pointer to a HOB.
456 @return A pointer to the next HOB in the HOB list.
459 #define GET_NEXT_HOB(HobStart) \
460 (VOID *)(*(UINT8 **)&(HobStart) + GET_HOB_LENGTH (HobStart))
463 Determines if a HOB is the last HOB in the HOB list.
465 This macro determine if the HOB specified by HobStart is the
466 last HOB in the HOB list. If HobStart is last HOB in the HOB list,
467 then TRUE is returned. Otherwise, FALSE is returned.
469 @param HobStart A pointer to a HOB.
471 @retval TRUE The HOB specified by HobStart is the last HOB in the HOB list.
472 @retval FALSE The HOB specified by HobStart is not the last HOB in the HOB list.
475 #define END_OF_HOB_LIST(HobStart) (GET_HOB_TYPE (HobStart) == (UINT16)EFI_HOB_TYPE_END_OF_HOB_LIST)
478 Returns a pointer to data buffer from a HOB of type EFI_HOB_TYPE_GUID_EXTENSION.
480 This macro returns a pointer to the data buffer in a HOB specified by HobStart.
481 HobStart is assumed to be a HOB of type EFI_HOB_TYPE_GUID_EXTENSION.
483 @param GuidHob A pointer to a HOB.
485 @return A pointer to the data buffer in a HOB.
488 #define GET_GUID_HOB_DATA(HobStart) \
489 (VOID *)(*(UINT8 **)&(HobStart) + sizeof (EFI_HOB_GUID_TYPE))
492 Returns the size of the data buffer from a HOB of type EFI_HOB_TYPE_GUID_EXTENSION.
494 This macro returns the size, in bytes, of the data buffer in a HOB specified by HobStart.
495 HobStart is assumed to be a HOB of type EFI_HOB_TYPE_GUID_EXTENSION.
497 @param GuidHob A pointer to a HOB.
499 @return The size of the data buffer.
501 #define GET_GUID_HOB_DATA_SIZE(HobStart) \
502 (UINT16)(GET_HOB_LENGTH (HobStart) - sizeof (EFI_HOB_GUID_TYPE))