MdePkg/Include/Protocol/ScsiPassThruExt.h

   1 /** @file
   2   EFI_EXT_SCSI_PASS_THRU_PROTOCOL as defined in UEFI 2.0.
   3
   4   Copyright (c) 2006, Intel Corporation
   5   All rights reserved. This program and the accompanying materials
   6   are licensed and made available under the terms and conditions of the BSD License
   7   which accompanies this distribution.  The full text of the license may be found at
   8   http://opensource.org/licenses/bsd-license.php
   9
  10   THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  11   WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
  12
  13   Module Name:  ScsiPassThruExt.h
  14
  15 **/
  16
  17 #ifndef __EXT_SCSI_PASS_THROUGH_PROTOCOL_H__
  18 #define __EXT_SCSI_PASS_THROUGH_PROTOCOL_H__
  19
  20 #define EFI_EXT_SCSI_PASS_THRU_PROTOCOL_GUID \
  21   { \
  22     0x1d3de7f0, 0x0807, 0x424f, {0xaa, 0x69, 0x11, 0xa5, 0x4e, 0x19, 0xa4, 0x6f } \
  23   }
  24
  25 typedef struct _EFI_EXT_SCSI_PASS_THRU_PROTOCOL EFI_EXT_SCSI_PASS_THRU_PROTOCOL;
  26
  27 #define TARGET_MAX_BYTES                             0x10
  28
  29 #define EFI_EXT_SCSI_PASS_THRU_ATTRIBUTES_PHYSICAL   0x0001
  30 #define EFI_EXT_SCSI_PASS_THRU_ATTRIBUTES_LOGICAL    0x0002
  31 #define EFI_EXT_SCSI_PASS_THRU_ATTRIBUTES_NONBLOCKIO 0x0004
  32
  33 //
  34 // DataDirection
  35 //
  36 #define EFI_EXT_SCSI_DATA_DIRECTION_READ             0
  37 #define EFI_EXT_SCSI_DATA_DIRECTION_WRITE            1
  38 #define EFI_EXT_SCSI_DATA_DIRECTION_BIDIRECTIONAL    2
  39 //
  40 // HostAdapterStatus
  41 //
  42 #define EFI_EXT_SCSI_STATUS_HOST_ADAPTER_OK                    0x00
  43 #define EFI_EXT_SCSI_STATUS_HOST_ADAPTER_TIMEOUT_COMMAND       0x09
  44 #define EFI_EXT_SCSI_STATUS_HOST_ADAPTER_TIMEOUT               0x0b
  45 #define EFI_EXT_SCSI_STATUS_HOST_ADAPTER_MESSAGE_REJECT        0x0d
  46 #define EFI_EXT_SCSI_STATUS_HOST_ADAPTER_BUS_RESET             0x0e
  47 #define EFI_EXT_SCSI_STATUS_HOST_ADAPTER_PARITY_ERROR          0x0f
  48 #define EFI_EXT_SCSI_STATUS_HOST_ADAPTER_REQUEST_SENSE_FAILED  0x10
  49 #define EFI_EXT_SCSI_STATUS_HOST_ADAPTER_SELECTION_TIMEOUT     0x11
  50 #define EFI_EXT_SCSI_STATUS_HOST_ADAPTER_DATA_OVERRUN_UNDERRUN 0x12
  51 #define EFI_EXT_SCSI_STATUS_HOST_ADAPTER_BUS_FREE              0x13
  52 #define EFI_EXT_SCSI_STATUS_HOST_ADAPTER_PHASE_ERROR           0x14
  53 #define EFI_EXT_SCSI_STATUS_HOST_ADAPTER_OTHER                 0x7f
  54 //
  55 // TargetStatus
  56 //
  57 #define EFI_EXT_SCSI_STATUS_TARGET_GOOD                        0x00
  58 #define EFI_EXT_SCSI_STATUS_TARGET_CHECK_CONDITION             0x02
  59 #define EFI_EXT_SCSI_STATUS_TARGET_CONDITION_MET               0x04
  60 #define EFI_EXT_SCSI_STATUS_TARGET_BUSY                        0x08
  61 #define EFI_EXT_SCSI_STATUS_TARGET_INTERMEDIATE                0x10
  62 #define EFI_EXT_SCSI_STATUS_TARGET_INTERMEDIATE_CONDITION_MET  0x14
  63 #define EFI_EXT_SCSI_STATUS_TARGET_RESERVATION_CONFLICT        0x18
  64 #define EFI_EXT_SCSI_STATUS_TARGET_TASK_SET_FULL               0x28
  65 #define EFI_EXT_SCSI_STATUS_TARGET_ACA_ACTIVE                  0x30
  66 #define EFI_EXT_SCSI_STATUS_TARGET_TASK_ABORTED                0x40
  67
  68 typedef struct {
  69   UINT32 AdapterId;
  70   UINT32 Attributes;
  71   UINT32 IoAlign;
  72 } EFI_EXT_SCSI_PASS_THRU_MODE;
  73
  74 typedef struct {
  75   UINT64 Timeout;
  76   VOID   *InDataBuffer;
  77   VOID   *OutDataBuffer;
  78   VOID   *SenseData;
  79   VOID   *Cdb;
  80   UINT32 InTransferLength;
  81   UINT32 OutTransferLength;
  82   UINT8  CdbLength;
  83   UINT8  DataDirection;
  84   UINT8  HostAdapterStatus;
  85   UINT8  TargetStatus;
  86   UINT8  SenseDataLength;
  87 } EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET;
  88
  89 /**
  90   Sends a SCSI Request Packet to a SCSI device that is attached to the SCSI channel. This function
  91   supports both blocking I/O and nonblocking I/O. The blocking I/O functionality is required, and the
  92   nonblocking I/O functionality is optional.
  93
  94   @param  This    A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance.
  95   @param  Target  The Target is an array of size TARGET_MAX_BYTES and it represents
  96                   the id of the SCSI device to send the SCSI Request Packet. Each
  97                   transport driver may chose to utilize a subset of this size to suit the needs
  98                   of transport target representation. For example, a Fibre Channel driver
  99                   may use only 8 bytes (WWN) to represent an FC target.
 100   @param  Lun     The LUN of the SCSI device to send the SCSI Request Packet.
 101   @param  Packet  A pointer to the SCSI Request Packet to send to the SCSI device
 102                   specified by Target and Lun.
 103   @param  Event   If nonblocking I/O is not supported then Event is ignored, and blocking
 104                   I/O is performed. If Event is NULL, then blocking I/O is performed. If
 105                   Event is not NULL and non blocking I/O is supported, then
 106                   nonblocking I/O is performed, and Event will be signaled when the
 107                   SCSI Request Packet completes.
 108
 109   @retval EFI_SUCCESS           The SCSI Request Packet was sent by the host. For bi-directional
 110                                 commands, InTransferLength bytes were transferred from
 111                                 InDataBuffer. For write and bi-directional commands,
 112                                 OutTransferLength bytes were transferred by
 113                                 OutDataBuffer.
 114   @retval EFI_BAD_BUFFER_SIZE   The SCSI Request Packet was not executed. The number of bytes that
 115                                 could be transferred is returned in InTransferLength. For write
 116                                 and bi-directional commands, OutTransferLength bytes were
 117                                 transferred by OutDataBuffer.
 118   @retval EFI_NOT_READY         The SCSI Request Packet could not be sent because there are too many
 119                                 SCSI Request Packets already queued. The caller may retry again later.
 120   @retval EFI_DEVICE_ERROR      A device error occurred while attempting to send the SCSI Request
 121                                 Packet.
 122   @retval EFI_INVALID_PARAMETER Target, Lun, or the contents of ScsiRequestPacket are invalid.
 123   @retval EFI_UNSUPPORTED       The command described by the SCSI Request Packet is not supported
 124                                 by the host adapter. This includes the case of Bi-directional SCSI
 125                                 commands not supported by the implementation. The SCSI Request
 126                                 Packet was not sent, so no additional status information is available.
 127   @retval EFI_TIMEOUT           A timeout occurred while waiting for the SCSI Request Packet to execute.
 128
 129 **/
 130 typedef
 131 EFI_STATUS
 132 (EFIAPI *EFI_EXT_SCSI_PASS_THRU_PASSTHRU) (
 133   IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL                *This,
 134   IN UINT8                                          *Target,
 135   IN UINT64                                         Lun,
 136   IN OUT EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET *Packet,
 137   IN EFI_EVENT                                      Event     OPTIONAL
 138   )
 139 ;
 140
 141 /**
 142   Used to retrieve the list of legal Target IDs and LUNs for SCSI devices on a SCSI channel. These
 143   can either be the list SCSI devices that are actually present on the SCSI channel, or the list of legal
 144   Target Ids and LUNs for the SCSI channel. Regardless, the caller of this function must probe the
 145   Target ID and LUN returned to see if a SCSI device is actually present at that location on the SCSI
 146   channel.
 147
 148   @param  This   A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance.
 149   @param  Target On input, a pointer to the Target ID (an array of size
 150                  TARGET_MAX_BYTES) of a SCSI device present on the SCSI channel.
 151                  On output, a pointer to the Target ID (an array of
 152                  TARGET_MAX_BYTES) of the next SCSI device present on a SCSI
 153                  channel. An input value of 0xF(all bytes in the array are 0xF) in the
 154                  Target array retrieves the Target ID of the first SCSI device present on a
 155                  SCSI channel.
 156   @param  Lun    On input, a pointer to the LUN of a SCSI device present on the SCSI
 157                  channel. On output, a pointer to the LUN of the next SCSI device present
 158                  on a SCSI channel.
 159
 160   @retval EFI_SUCCESS           The Target ID and LUN of the next SCSI device on the SCSI
 161                                 channel was returned in Target and Lun.
 162   @retval EFI_INVALID_PARAMETER Target array is not all 0xF, and Target and Lun were
 163                                 not returned on a previous call to GetNextTargetLun().
 164   @retval EFI_NOT_FOUND         There are no more SCSI devices on this SCSI channel.
 165
 166 **/
 167 typedef
 168 EFI_STATUS
 169 (EFIAPI *EFI_EXT_SCSI_PASS_THRU_GET_NEXT_TARGET_LUN) (
 170   IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL                *This,
 171   IN OUT UINT8                                      **Target,
 172   IN OUT UINT64                                     *Lun
 173   )
 174 ;
 175
 176 /**
 177   Used to allocate and build a device path node for a SCSI device on a SCSI channel.
 178
 179   @param  This       A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance.
 180   @param  Target     The Target is an array of size TARGET_MAX_BYTES and it specifies the
 181                      Target ID of the SCSI device for which a device path node is to be
 182                      allocated and built. Transport drivers may chose to utilize a subset of
 183                      this size to suit the representation of targets. For example, a Fibre
 184                      Channel driver may use only 8 bytes (WWN) in the array to represent a
 185                      FC target.
 186   @param  Lun        The LUN of the SCSI device for which a device path node is to be
 187                      allocated and built.
 188   @param  DevicePath A pointer to a single device path node that describes the SCSI device
 189                      specified by Target and Lun. This function is responsible for
 190                      allocating the buffer DevicePath with the boot service
 191                      AllocatePool(). It is the caller's responsibility to free
 192                      DevicePath when the caller is finished with DevicePath.
 193
 194   @retval EFI_SUCCESS           The device path node that describes the SCSI device specified by
 195                                 Target and Lun was allocated and returned in
 196                                 DevicePath.
 197   @retval EFI_INVALID_PARAMETER DevicePath is NULL.
 198   @retval EFI_NOT_FOUND         The SCSI devices specified by Target and Lun does not exist
 199                                 on the SCSI channel.
 200   @retval EFI_OUT_OF_RESOURCES  There are not enough resources to allocate DevicePath.
 201
 202 **/
 203 typedef
 204 EFI_STATUS
 205 (EFIAPI *EFI_EXT_SCSI_PASS_THRU_BUILD_DEVICE_PATH) (
 206   IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL               *This,
 207   IN UINT8                                         *Target,
 208   IN UINT64                                        Lun,
 209   IN OUT EFI_DEVICE_PATH_PROTOCOL                  **DevicePath
 210   )
 211 ;
 212
 213 /**
 214   Used to translate a device path node to a Target ID and LUN.
 215
 216   @param  This       A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance.
 217   @param  DevicePath A pointer to a single device path node that describes the SCSI device
 218                      on the SCSI channel.
 219   @param  Target     A pointer to the Target Array which represents the ID of a SCSI device
 220                      on the SCSI channel.
 221   @param  Lun        A pointer to the LUN of a SCSI device on the SCSI channel.
 222
 223   @retval EFI_SUCCESS           DevicePath was successfully translated to a Target ID and
 224                                 LUN, and they were returned in Target and Lun.
 225   @retval EFI_INVALID_PARAMETER DevicePath or Target or Lun is NULL.
 226   @retval EFI_NOT_FOUND         A valid translation from DevicePath to a Target ID and LUN
 227                                 does not exist.
 228   @retval EFI_UNSUPPORTED       This driver does not support the device path node type in
 229                                  DevicePath.
 230
 231 **/
 232 typedef
 233 EFI_STATUS
 234 (EFIAPI *EFI_EXT_SCSI_PASS_THRU_GET_TARGET_LUN) (
 235   IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL               *This,
 236   IN EFI_DEVICE_PATH_PROTOCOL                      *DevicePath,
 237   OUT UINT8                                        **Target,
 238   OUT UINT64                                       *Lun
 239   )
 240 ;
 241
 242 /**
 243   Resets a SCSI channel. This operation resets all the SCSI devices connected to the SCSI channel.
 244
 245   @param  This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance.
 246
 247   @retval EFI_SUCCESS      The SCSI channel was reset.
 248   @retval EFI_DEVICE_ERROR A device error occurred while attempting to reset the SCSI channel.
 249   @retval EFI_TIMEOUT      A timeout occurred while attempting to reset the SCSI channel.
 250   @retval EFI_UNSUPPORTED  The SCSI channel does not support a channel reset operation.
 251
 252 **/
 253 typedef
 254 EFI_STATUS
 255 (EFIAPI *EFI_EXT_SCSI_PASS_THRU_RESET_CHANNEL) (
 256   IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL               *This
 257   )
 258 ;
 259
 260 /**
 261   Resets a SCSI logical unit that is connected to a SCSI channel.
 262
 263   @param  This   A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance.
 264   @param  Target The Target is an array of size TARGET_MAX_BYTE and it represents the
 265                  target port ID of the SCSI device containing the SCSI logical unit to
 266                  reset. Transport drivers may chose to utilize a subset of this array to suit
 267                  the representation of their targets.
 268   @param  Lun    The LUN of the SCSI device to reset.
 269
 270   @retval EFI_SUCCESS           The SCSI device specified by Target and Lun was reset.
 271   @retval EFI_INVALID_PARAMETER Target or Lun is NULL.
 272   @retval EFI_TIMEOUT           A timeout occurred while attempting to reset the SCSI device
 273                                 specified by Target and Lun.
 274   @retval EFI_UNSUPPORTED       The SCSI channel does not support a target reset operation.
 275   @retval EFI_DEVICE_ERROR      A device error occurred while attempting to reset the SCSI device
 276                                  specified by Target and Lun.
 277
 278 **/
 279 typedef
 280 EFI_STATUS
 281 (EFIAPI *EFI_EXT_SCSI_PASS_THRU_RESET_TARGET_LUN) (
 282   IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL               *This,
 283   IN UINT8                                         *Target,
 284   IN UINT64                                        Lun
 285   )
 286 ;
 287
 288 /**
 289   Used to retrieve the list of legal Target IDs for SCSI devices on a SCSI channel. These can either
 290   be the list SCSI devices that are actually present on the SCSI channel, or the list of legal Target IDs
 291   for the SCSI channel. Regardless, the caller of this function must probe the Target ID returned to
 292   see if a SCSI device is actually present at that location on the SCSI channel.
 293
 294   @param  This   A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance.
 295   @param  Target (TARGET_MAX_BYTES) of a SCSI device present on the SCSI channel.
 296                  On output, a pointer to the Target ID (an array of
 297                  TARGET_MAX_BYTES) of the next SCSI device present on a SCSI
 298                  channel. An input value of 0xF(all bytes in the array are 0xF) in the
 299                  Target array retrieves the Target ID of the first SCSI device present on a
 300                  SCSI channel.
 301
 302   @retval EFI_SUCCESS           The Target ID of the next SCSI device on the SCSI
 303                                 channel was returned in Target.
 304   @retval EFI_INVALID_PARAMETER Target or Lun is NULL.
 305   @retval EFI_TIMEOUT           Target array is not all 0xF, and Target were not
 306                                 returned on a previous call to GetNextTarget().
 307   @retval EFI_NOT_FOUND         There are no more SCSI devices on this SCSI channel.
 308
 309 **/
 310 typedef
 311 EFI_STATUS
 312 (EFIAPI *EFI_EXT_SCSI_PASS_THRU_GET_NEXT_TARGET) (
 313   IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL               *This,
 314   IN OUT UINT8                                     **Target
 315   )
 316 ;
 317
 318 struct _EFI_EXT_SCSI_PASS_THRU_PROTOCOL {
 319   EFI_EXT_SCSI_PASS_THRU_MODE                *Mode;
 320   EFI_EXT_SCSI_PASS_THRU_PASSTHRU            PassThru;
 321   EFI_EXT_SCSI_PASS_THRU_GET_NEXT_TARGET_LUN GetNextTargetLun;
 322   EFI_EXT_SCSI_PASS_THRU_BUILD_DEVICE_PATH   BuildDevicePath;
 323   EFI_EXT_SCSI_PASS_THRU_GET_TARGET_LUN      GetTargetLun;
 324   EFI_EXT_SCSI_PASS_THRU_RESET_CHANNEL       ResetChannel;
 325   EFI_EXT_SCSI_PASS_THRU_RESET_TARGET_LUN    ResetTargetLun;
 326   EFI_EXT_SCSI_PASS_THRU_GET_NEXT_TARGET     GetNextTarget;
 327 };
 328
 329 extern EFI_GUID gEfiExtScsiPassThruProtocolGuid;
 330
 331 #endif