2 Simple Text Out protocol from the EFI 1.0 specification.
4 Abstraction of a very simple text based output device like VGA text mode or
5 a serial terminal. The Simple Text Out protocol instance can represent
6 a single hardware device or a virtual device that is an agregation
7 of multiple physical devices.
9 Copyright (c) 2006, Intel Corporation
10 All rights reserved. This program and the accompanying materials
11 are licensed and made available under the terms and conditions of the BSD License
12 which accompanies this distribution. The full text of the license may be found at
13 http://opensource.org/licenses/bsd-license.php
15 THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
16 WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
20 #ifndef __SIMPLE_TEXT_OUT_H__
21 #define __SIMPLE_TEXT_OUT_H__
23 #define EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL_GUID \
25 0x387477c2, 0x69c7, 0x11d2, {0x8e, 0x39, 0x0, 0xa0, 0xc9, 0x69, 0x72, 0x3b } \
29 // Protocol GUID defined in EFI1.1.
31 #define SIMPLE_TEXT_OUTPUT_PROTOCOL EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL_GUID
33 typedef struct _EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL
;
36 // Backward-compatible with EFI1.1.
38 typedef EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL SIMPLE_TEXT_OUTPUT_INTERFACE
;
41 // Define's for required EFI Unicode Box Draw characters
43 #define BOXDRAW_HORIZONTAL 0x2500
44 #define BOXDRAW_VERTICAL 0x2502
45 #define BOXDRAW_DOWN_RIGHT 0x250c
46 #define BOXDRAW_DOWN_LEFT 0x2510
47 #define BOXDRAW_UP_RIGHT 0x2514
48 #define BOXDRAW_UP_LEFT 0x2518
49 #define BOXDRAW_VERTICAL_RIGHT 0x251c
50 #define BOXDRAW_VERTICAL_LEFT 0x2524
51 #define BOXDRAW_DOWN_HORIZONTAL 0x252c
52 #define BOXDRAW_UP_HORIZONTAL 0x2534
53 #define BOXDRAW_VERTICAL_HORIZONTAL 0x253c
54 #define BOXDRAW_DOUBLE_HORIZONTAL 0x2550
55 #define BOXDRAW_DOUBLE_VERTICAL 0x2551
56 #define BOXDRAW_DOWN_RIGHT_DOUBLE 0x2552
57 #define BOXDRAW_DOWN_DOUBLE_RIGHT 0x2553
58 #define BOXDRAW_DOUBLE_DOWN_RIGHT 0x2554
59 #define BOXDRAW_DOWN_LEFT_DOUBLE 0x2555
60 #define BOXDRAW_DOWN_DOUBLE_LEFT 0x2556
61 #define BOXDRAW_DOUBLE_DOWN_LEFT 0x2557
62 #define BOXDRAW_UP_RIGHT_DOUBLE 0x2558
63 #define BOXDRAW_UP_DOUBLE_RIGHT 0x2559
64 #define BOXDRAW_DOUBLE_UP_RIGHT 0x255a
65 #define BOXDRAW_UP_LEFT_DOUBLE 0x255b
66 #define BOXDRAW_UP_DOUBLE_LEFT 0x255c
67 #define BOXDRAW_DOUBLE_UP_LEFT 0x255d
68 #define BOXDRAW_VERTICAL_RIGHT_DOUBLE 0x255e
69 #define BOXDRAW_VERTICAL_DOUBLE_RIGHT 0x255f
70 #define BOXDRAW_DOUBLE_VERTICAL_RIGHT 0x2560
71 #define BOXDRAW_VERTICAL_LEFT_DOUBLE 0x2561
72 #define BOXDRAW_VERTICAL_DOUBLE_LEFT 0x2562
73 #define BOXDRAW_DOUBLE_VERTICAL_LEFT 0x2563
74 #define BOXDRAW_DOWN_HORIZONTAL_DOUBLE 0x2564
75 #define BOXDRAW_DOWN_DOUBLE_HORIZONTAL 0x2565
76 #define BOXDRAW_DOUBLE_DOWN_HORIZONTAL 0x2566
77 #define BOXDRAW_UP_HORIZONTAL_DOUBLE 0x2567
78 #define BOXDRAW_UP_DOUBLE_HORIZONTAL 0x2568
79 #define BOXDRAW_DOUBLE_UP_HORIZONTAL 0x2569
80 #define BOXDRAW_VERTICAL_HORIZONTAL_DOUBLE 0x256a
81 #define BOXDRAW_VERTICAL_DOUBLE_HORIZONTAL 0x256b
82 #define BOXDRAW_DOUBLE_VERTICAL_HORIZONTAL 0x256c
85 // EFI Required Block Elements Code Chart
87 #define BLOCKELEMENT_FULL_BLOCK 0x2588
88 #define BLOCKELEMENT_LIGHT_SHADE 0x2591
91 // EFI Required Geometric Shapes Code Chart
93 #define GEOMETRICSHAPE_UP_TRIANGLE 0x25b2
94 #define GEOMETRICSHAPE_RIGHT_TRIANGLE 0x25ba
95 #define GEOMETRICSHAPE_DOWN_TRIANGLE 0x25bc
96 #define GEOMETRICSHAPE_LEFT_TRIANGLE 0x25c4
99 // EFI Required Arrow shapes
101 #define ARROW_LEFT 0x2190
102 #define ARROW_UP 0x2191
103 #define ARROW_RIGHT 0x2192
104 #define ARROW_DOWN 0x2193
107 // EFI Console Colours
109 #define EFI_BLACK 0x00
110 #define EFI_BLUE 0x01
111 #define EFI_GREEN 0x02
112 #define EFI_CYAN (EFI_BLUE | EFI_GREEN)
114 #define EFI_MAGENTA (EFI_BLUE | EFI_RED)
115 #define EFI_BROWN (EFI_GREEN | EFI_RED)
116 #define EFI_LIGHTGRAY (EFI_BLUE | EFI_GREEN | EFI_RED)
117 #define EFI_BRIGHT 0x08
118 #define EFI_DARKGRAY (EFI_BRIGHT)
119 #define EFI_LIGHTBLUE (EFI_BLUE | EFI_BRIGHT)
120 #define EFI_LIGHTGREEN (EFI_GREEN | EFI_BRIGHT)
121 #define EFI_LIGHTCYAN (EFI_CYAN | EFI_BRIGHT)
122 #define EFI_LIGHTRED (EFI_RED | EFI_BRIGHT)
123 #define EFI_LIGHTMAGENTA (EFI_MAGENTA | EFI_BRIGHT)
124 #define EFI_YELLOW (EFI_BROWN | EFI_BRIGHT)
125 #define EFI_WHITE (EFI_BLUE | EFI_GREEN | EFI_RED | EFI_BRIGHT)
127 #define EFI_TEXT_ATTR(f, b) ((f) | ((b) << 4))
129 #define EFI_BACKGROUND_BLACK 0x00
130 #define EFI_BACKGROUND_BLUE 0x10
131 #define EFI_BACKGROUND_GREEN 0x20
132 #define EFI_BACKGROUND_CYAN (EFI_BACKGROUND_BLUE | EFI_BACKGROUND_GREEN)
133 #define EFI_BACKGROUND_RED 0x40
134 #define EFI_BACKGROUND_MAGENTA (EFI_BACKGROUND_BLUE | EFI_BACKGROUND_RED)
135 #define EFI_BACKGROUND_BROWN (EFI_BACKGROUND_GREEN | EFI_BACKGROUND_RED)
136 #define EFI_BACKGROUND_LIGHTGRAY (EFI_BACKGROUND_BLUE | EFI_BACKGROUND_GREEN | EFI_BACKGROUND_RED)
139 // We currently define attributes from 0 - 7F for color manipulations
140 // To internally handle the local display characteristics for a particular character, we are defining
141 // Bit 7 to signify the local glyph representation for a character. If turned on, glyphs will be
142 // pulled from the wide glyph database and will display locally as a wide character (16 X 19 versus 8 X 19)
143 // If bit 7 is off, the narrow glyph database will be used. This does NOT affect information that is sent to
144 // non-local displays (e.g. serial or LAN consoles).
146 #define EFI_WIDE_ATTRIBUTE 0x80
149 Reset the text output device hardware and optionaly run diagnostics
151 @param This Protocol instance pointer.
152 @param ExtendedVerification Driver may perform more exhaustive verfication
153 operation of the device during reset.
155 @retval EFI_SUCCESS The text output device was reset.
156 @retval EFI_DEVICE_ERROR The text output device is not functioning correctly and
162 (EFIAPI
*EFI_TEXT_RESET
) (
163 IN EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL
*This
,
164 IN BOOLEAN ExtendedVerification
169 Write a Unicode string to the output device.
171 @param This Protocol instance pointer.
172 @param String The NULL-terminated Unicode string to be displayed on the output
173 device(s). All output devices must also support the Unicode
174 drawing defined in this file.
176 @retval EFI_SUCCESS The string was output to the device.
177 @retval EFI_DEVICE_ERROR The device reported an error while attempting to output
179 @retval EFI_UNSUPPORTED The output device's mode is not currently in a
181 @retval EFI_WARN_UNKNOWN_GLYPH This warning code indicates that some of the
182 characters in the Unicode string could not be
183 rendered and were skipped.
188 (EFIAPI
*EFI_TEXT_STRING
) (
189 IN EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL
*This
,
195 Verifies that all characters in a Unicode string can be output to the
198 @param This Protocol instance pointer.
199 @param String The NULL-terminated Unicode string to be examined for the output
202 @retval EFI_SUCCESS The device(s) are capable of rendering the output string.
203 @retval EFI_UNSUPPORTED Some of the characters in the Unicode string cannot be
204 rendered by one or more of the output devices mapped
210 (EFIAPI
*EFI_TEXT_TEST_STRING
) (
211 IN EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL
*This
,
217 Returns information for an available text mode that the output device(s)
220 @param This Protocol instance pointer.
221 @param ModeNumber The mode number to return information on.
222 @param Columns Returns the geometry of the text output device for the
223 requested ModeNumber.
224 @param Rows Returns the geometry of the text output device for the
225 requested ModeNumber.
227 @retval EFI_SUCCESS The requested mode information was returned.
228 @retval EFI_DEVICE_ERROR The device had an error and could not complete the request.
229 @retval EFI_UNSUPPORTED The mode number was not valid.
234 (EFIAPI
*EFI_TEXT_QUERY_MODE
) (
235 IN EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL
*This
,
243 Sets the output device(s) to a specified mode.
245 @param This Protocol instance pointer.
246 @param ModeNumber The mode number to set.
248 @retval EFI_SUCCESS The requested text mode was set.
249 @retval EFI_DEVICE_ERROR The device had an error and could not complete the request.
250 @retval EFI_UNSUPPORTED The mode number was not valid.
255 (EFIAPI
*EFI_TEXT_SET_MODE
) (
256 IN EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL
*This
,
262 Sets the background and foreground colors for the OutputString () and
263 ClearScreen () functions.
265 @param This Protocol instance pointer.
266 @param Attribute The attribute to set. Bits 0..3 are the foreground color, and
267 bits 4..6 are the background color. All other bits are undefined
268 and must be zero. The valid Attributes are defined in this file.
270 @retval EFI_SUCCESS The attribute was set.
271 @retval EFI_DEVICE_ ERROR The device had an error and could not complete the request.
272 @retval EFI_UNSUPPORTED The attribute requested is not defined.
277 (EFIAPI
*EFI_TEXT_SET_ATTRIBUTE
) (
278 IN EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL
*This
,
284 Clears the output device(s) display to the currently selected background
287 @param This Protocol instance pointer.
289 @retval EFI_SUCCESS The operation completed successfully.
290 @retval EFI_DEVICE_ERROR The device had an error and could not complete the request.
291 @retval EFI_UNSUPPORTED The output device is not in a valid text mode.
296 (EFIAPI
*EFI_TEXT_CLEAR_SCREEN
) (
297 IN EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL
*This
302 Sets the current coordinates of the cursor position
304 @param This Protocol instance pointer.
305 @param Column The position to set the cursor to. Must be greater than or
306 equal to zero and less than the number of columns and rows
308 @param Row The position to set the cursor to. Must be greater than or
309 equal to zero and less than the number of columns and rows
312 @retval EFI_SUCCESS The operation completed successfully.
313 @retval EFI_DEVICE_ERROR The device had an error and could not complete the request.
314 @retval EFI_UNSUPPORTED The output device is not in a valid text mode, or the
315 cursor position is invalid for the current mode.
320 (EFIAPI
*EFI_TEXT_SET_CURSOR_POSITION
) (
321 IN EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL
*This
,
328 Makes the cursor visible or invisible
330 @param This Protocol instance pointer.
331 @param Visible If TRUE, the cursor is set to be visible. If FALSE, the cursor is
334 @retval EFI_SUCCESS The operation completed successfully.
335 @retval EFI_DEVICE_ERROR The device had an error and could not complete the
336 request, or the device does not support changing
338 @retval EFI_UNSUPPORTED The output device is not in a valid text mode.
343 (EFIAPI
*EFI_TEXT_ENABLE_CURSOR
) (
344 IN EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL
*This
,
350 Mode Structure pointed to by Simple Text Out protocol.
352 MaxMode - The number of modes supported by QueryMode () and SetMode ().
353 Mode - The text mode of the output device(s).
354 Attribute - The current character output attribute
355 CursorColumn - The cursor's column.
356 CursorRow - The cursor's row.
357 CursorVisible - The cursor is currently visbile or not.
370 BOOLEAN CursorVisible
;
371 } EFI_SIMPLE_TEXT_OUTPUT_MODE
;
373 struct _EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL
{
374 EFI_TEXT_RESET Reset
;
376 EFI_TEXT_STRING OutputString
;
377 EFI_TEXT_TEST_STRING TestString
;
379 EFI_TEXT_QUERY_MODE QueryMode
;
380 EFI_TEXT_SET_MODE SetMode
;
381 EFI_TEXT_SET_ATTRIBUTE SetAttribute
;
383 EFI_TEXT_CLEAR_SCREEN ClearScreen
;
384 EFI_TEXT_SET_CURSOR_POSITION SetCursorPosition
;
385 EFI_TEXT_ENABLE_CURSOR EnableCursor
;
390 EFI_SIMPLE_TEXT_OUTPUT_MODE
*Mode
;
393 extern EFI_GUID gEfiSimpleTextOutProtocolGuid
;