2 Base Debug library instance base on Serial Port library.
3 It uses PrintLib to send debug messages to serial port device.
5 Copyright (c) 2006 - 2008, Intel Corporation<BR>
6 All rights reserved. This program and the accompanying materials
7 are licensed and made available under the terms and conditions of the BSD License
8 which accompanies this distribution. The full text of the license may be found at
9 http://opensource.org/licenses/bsd-license.php
11 THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
12 WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
17 #include <Library/DebugLib.h>
18 #include <Library/BaseLib.h>
19 #include <Library/PrintLib.h>
20 #include <Library/PcdLib.h>
21 #include <Library/BaseMemoryLib.h>
22 #include <Library/SerialPortLib.h>
26 // Define the maximum debug and assert message length that this library supports
28 #define MAX_DEBUG_MESSAGE_LENGTH 0x100
32 Prints a debug message to the debug output device if the specified error level is enabled.
34 If any bit in ErrorLevel is also set in PcdDebugPrintErrorLevel, then print
35 the message specified by Format and the associated variable argument list to
36 the debug output device.
38 If Format is NULL, then ASSERT().
40 @param ErrorLevel The error level of the debug message.
41 @param Format Format string for the debug message to print.
42 @param ... The variable argument list.
49 IN CONST CHAR8
*Format
,
53 CHAR8 Buffer
[MAX_DEBUG_MESSAGE_LENGTH
];
57 // If Format is NULL, then ASSERT().
59 ASSERT (Format
!= NULL
);
62 // Check driver debug mask value and global mask
64 if ((ErrorLevel
& PcdGet32(PcdDebugPrintErrorLevel
)) == 0) {
69 // Convert the DEBUG() message to an ASCII String
71 VA_START (Marker
, Format
);
72 AsciiVSPrint (Buffer
, sizeof (Buffer
), Format
, Marker
);
76 // Send the print string to a Serial Port
78 SerialPortWrite ((UINT8
*) Buffer
, AsciiStrLen(Buffer
));
83 Prints an assert message containing a filename, line number, and description.
84 This may be followed by a breakpoint or a dead loop.
86 Print a message of the form "ASSERT <FileName>(<LineNumber>): <Description>\n"
87 to the debug output device. If DEBUG_PROPERTY_ASSERT_BREAKPOINT_ENABLED bit of
88 PcdDebugProperyMask is set then CpuBreakpoint() is called. Otherwise, if
89 DEBUG_PROPERTY_ASSERT_DEADLOOP_ENABLED bit of PcdDebugProperyMask is set then
90 CpuDeadLoop() is called. If neither of these bits are set, then this function
91 returns immediately after the message is printed to the debug output device.
92 DebugAssert() must actively prevent recusrsion. If DebugAssert() is called while
93 processing another DebugAssert(), then DebugAssert() must return immediately.
95 If FileName is NULL, then a <FileName> string of "(NULL) Filename" is printed.
97 If Description is NULL, then a <Description> string of "(NULL) Description" is printed.
99 @param FileName Pointer to the name of the source file that generated the assert condition.
100 @param LineNumber The line number in the source file that generated the assert condition
101 @param Description Pointer to the description of the assert condition.
107 IN CONST CHAR8
*FileName
,
109 IN CONST CHAR8
*Description
112 CHAR8 Buffer
[MAX_DEBUG_MESSAGE_LENGTH
];
115 // Generate the ASSERT() message in Unicode format
117 AsciiSPrint (Buffer
, sizeof (Buffer
), "ASSERT %a(%d): %a\n", FileName
, LineNumber
, Description
);
120 // Send the print string to the Console Output device
122 SerialPortWrite ((UINT8
*) Buffer
, AsciiStrLen(Buffer
));
125 // Generate a Breakpoint, DeadLoop, or NOP based on PCD settings
127 if ((PcdGet8(PcdDebugPropertyMask
) & DEBUG_PROPERTY_ASSERT_BREAKPOINT_ENABLED
) != 0) {
129 } else if ((PcdGet8(PcdDebugPropertyMask
) & DEBUG_PROPERTY_ASSERT_DEADLOOP_ENABLED
) != 0) {
136 Fills a target buffer with PcdDebugClearMemoryValue, and returns the target buffer.
138 This function fills Length bytes of Buffer with the value specified by
139 PcdDebugClearMemoryValue, and returns Buffer.
141 If Buffer is NULL, then ASSERT().
143 If Length is greater than (MAX_ADDRESS ? Buffer + 1), then ASSERT().
145 @param Buffer Pointer to the target buffer to be filled with PcdDebugClearMemoryValue.
146 @param Length Number of bytes in Buffer to fill with zeros PcdDebugClearMemoryValue.
148 @return Buffer filled with PcdDebugClearMemoryValue.
159 // If Buffer is NULL, then ASSERT().
161 ASSERT (Buffer
!= NULL
);
164 // SetMem() checks for the the ASSERT() condition on Length and returns Buffer
166 return SetMem (Buffer
, Length
, PcdGet8(PcdDebugClearMemoryValue
));
171 Returns TRUE if ASSERT() macros are enabled.
173 This function returns TRUE if the DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of
174 PcdDebugProperyMask is set. Otherwise FALSE is returned.
176 @retval TRUE The DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of PcdDebugProperyMask is set.
177 @retval FALSE The DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of PcdDebugProperyMask is clear.
186 return (BOOLEAN
) ((PcdGet8(PcdDebugPropertyMask
) & DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED
) != 0);
191 Returns TRUE if the DEBUG() macro is enabled.
193 This function returns TRUE if the DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of
194 PcdDebugProperyMask is set. Otherwise FALSE is returned.
196 @retval TRUE The DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of PcdDebugProperyMask is set.
197 @retval FALSE The DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of PcdDebugProperyMask is clear.
206 return (BOOLEAN
) ((PcdGet8(PcdDebugPropertyMask
) & DEBUG_PROPERTY_DEBUG_PRINT_ENABLED
) != 0);
211 Returns TRUE if the DEBUG_CODE() macros are enabled.
213 This function returns TRUE if the DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of
214 PcdDebugProperyMask is set. Otherwise FALSE is returned.
216 @retval TRUE The DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of PcdDebugProperyMask is set.
217 @retval FALSE The DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of PcdDebugProperyMask is clear.
226 return (BOOLEAN
) ((PcdGet8(PcdDebugPropertyMask
) & DEBUG_PROPERTY_DEBUG_CODE_ENABLED
) != 0);
231 Returns TRUE if the DEBUG_CLEAR_MEMORY() macro is enabled.
233 This function returns TRUE if the DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of
234 PcdDebugProperyMask is set. Otherwise FALSE is returned.
236 @retval TRUE The DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of PcdDebugProperyMask is set.
237 @retval FALSE The DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of PcdDebugProperyMask is clear.
242 DebugClearMemoryEnabled (
246 return (BOOLEAN
) ((PcdGet8(PcdDebugPropertyMask
) & DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED
) != 0);