2 Contains all EFI_UDP6_PROTOCOL interfaces.
4 Copyright (c) 2009 - 2010, Intel Corporation. All rights reserved.<BR>
6 This program and the accompanying materials
7 are licensed and made available under the terms and conditions of the BSD License
8 which accompanies this distribution. The full text of the license may be found at
9 http://opensource.org/licenses/bsd-license.php.
11 THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
12 WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
18 EFI_UDP6_PROTOCOL mUdp6Protocol
= {
30 This function copies the current operational settings of this EFI UDPv6 Protocol
31 instance into user-supplied buffers. This function is used optionally to retrieve
32 the operational mode data of underlying networks or drivers.
34 @param[in] This Pointer to the EFI_UDP6_PROTOCOL instance.
35 @param[out] Udp6ConfigData The buffer in which the current UDP configuration
36 data is returned. This parameter is optional and
38 @param[out] Ip6ModeData The buffer in which the current EFI IPv6 Protocol
39 mode data is returned. This parameter is optional
41 @param[out] MnpConfigData The buffer in which the current managed network
42 configuration data is returned. This parameter is
43 optional and may be NULL.
44 @param[out] SnpModeData The buffer in which the simple network mode data
45 is returned. This parameter is optional and may be NULL.
47 @retval EFI_SUCCESS The mode data was read.
48 @retval EFI_NOT_STARTED When Udp6ConfigData is queried, no configuration
49 data is available because this instance has not
51 @retval EFI_INVALID_PARAMETER This is NULL.
57 IN EFI_UDP6_PROTOCOL
*This
,
58 OUT EFI_UDP6_CONFIG_DATA
*Udp6ConfigData OPTIONAL
,
59 OUT EFI_IP6_MODE_DATA
*Ip6ModeData OPTIONAL
,
60 OUT EFI_MANAGED_NETWORK_CONFIG_DATA
*MnpConfigData OPTIONAL
,
61 OUT EFI_SIMPLE_NETWORK_MODE
*SnpModeData OPTIONAL
64 UDP6_INSTANCE_DATA
*Instance
;
70 return EFI_INVALID_PARAMETER
;
73 Instance
= UDP6_INSTANCE_DATA_FROM_THIS (This
);
75 if (!Instance
->Configured
&& (Udp6ConfigData
!= NULL
)) {
76 return EFI_NOT_STARTED
;
79 OldTpl
= gBS
->RaiseTPL (TPL_CALLBACK
);
81 if (Udp6ConfigData
!= NULL
) {
83 // Set the Udp6ConfigData.
85 CopyMem (Udp6ConfigData
, &Instance
->ConfigData
, sizeof (EFI_UDP6_CONFIG_DATA
));
88 Ip
= Instance
->IpInfo
->Ip
.Ip6
;
91 // Get the underlying Ip6ModeData, MnpConfigData and SnpModeData.
93 Status
= Ip
->GetModeData (Ip
, Ip6ModeData
, MnpConfigData
, SnpModeData
);
95 gBS
->RestoreTPL (OldTpl
);
102 This function is used to do the following:
103 Initialize and start this instance of the EFI UDPv6 Protocol.
104 Change the filtering rules and operational parameters.
105 Reset this instance of the EFI UDPv6 Protocol.
107 @param[in] This Pointer to the EFI_UDP6_PROTOCOL instance.
108 @param[in] UdpConfigData Pointer to the buffer to set the configuration
109 data. This parameter is optional and may be NULL.
111 @retval EFI_SUCCESS The configuration settings were set, changed, or
113 @retval EFI_NO_MAPPING When the UdpConifgData.UseAnyStationAddress is set
114 to true and there is no address available for the IP6
115 driver to bind a source address to this instance.
116 @retval EFI_INVALID_PARAMETER One or more following conditions are TRUE:
118 UdpConfigData.StationAddress is not a valid
119 unicast IPv6 address.
120 UdpConfigData.RemoteAddress is not a valid unicast
121 IPv6 address if it is not zero.
122 @retval EFI_ALREADY_STARTED The EFI UDPv6 Protocol instance is already
123 started/configured and must be stopped/reset
124 before it can be reconfigured. Only TrafficClass,
125 HopLimit, ReceiveTimeout, and TransmitTimeout can
126 be reconfigured without stopping the current
127 instance of the EFI UDPv6 Protocol.
128 @retval EFI_ACCESS_DENIED UdpConfigData.AllowDuplicatePort is FALSE and
129 UdpConfigData.StationPort is already used by another
131 @retval EFI_OUT_OF_RESOURCES The EFI UDPv6 Protocol driver cannot allocate
132 memory for this EFI UDPv6 Protocol instance.
133 @retval EFI_DEVICE_ERROR An unexpected network or system error occurred, and
134 this instance was not opened.
140 IN EFI_UDP6_PROTOCOL
*This
,
141 IN EFI_UDP6_CONFIG_DATA
*UdpConfigData OPTIONAL
145 UDP6_INSTANCE_DATA
*Instance
;
146 UDP6_SERVICE_DATA
*Udp6Service
;
148 EFI_IPv6_ADDRESS StationAddress
;
149 EFI_IPv6_ADDRESS RemoteAddress
;
150 EFI_IP6_CONFIG_DATA Ip6ConfigData
;
151 EFI_IPv6_ADDRESS LocalAddr
;
152 EFI_IPv6_ADDRESS RemoteAddr
;
155 return EFI_INVALID_PARAMETER
;
158 Instance
= UDP6_INSTANCE_DATA_FROM_THIS (This
);
160 if (!Instance
->Configured
&& (UdpConfigData
== NULL
)) {
164 Udp6Service
= Instance
->Udp6Service
;
165 Status
= EFI_SUCCESS
;
166 ASSERT (Udp6Service
!= NULL
);
168 OldTpl
= gBS
->RaiseTPL (TPL_CALLBACK
);
170 if (UdpConfigData
!= NULL
) {
172 IP6_COPY_ADDRESS (&StationAddress
, &UdpConfigData
->StationAddress
);
173 IP6_COPY_ADDRESS (&RemoteAddress
, &UdpConfigData
->RemoteAddress
);
175 if ((!NetIp6IsUnspecifiedAddr (&StationAddress
) && !NetIp6IsValidUnicast (&StationAddress
)) ||
176 (!NetIp6IsUnspecifiedAddr (&RemoteAddress
) && !NetIp6IsValidUnicast (&RemoteAddress
))
179 // If not use default address, and StationAddress is not a valid unicast
180 // if it is not IPv6 address or RemoteAddress is not a valid unicast IPv6
181 // address if it is not 0.
183 Status
= EFI_INVALID_PARAMETER
;
187 if (Instance
->Configured
) {
189 // The instance is already configured, try to do the re-configuration.
191 if (!Udp6IsReconfigurable (&Instance
->ConfigData
, UdpConfigData
)) {
193 // If the new configuration data wants to change some unreconfigurable
194 // settings, return EFI_ALREADY_STARTED.
196 Status
= EFI_ALREADY_STARTED
;
201 // Save the reconfigurable parameters.
203 Instance
->ConfigData
.TrafficClass
= UdpConfigData
->TrafficClass
;
204 Instance
->ConfigData
.HopLimit
= UdpConfigData
->HopLimit
;
205 Instance
->ConfigData
.ReceiveTimeout
= UdpConfigData
->ReceiveTimeout
;
206 Instance
->ConfigData
.TransmitTimeout
= UdpConfigData
->TransmitTimeout
;
209 // Construct the Ip configuration data from the UdpConfigData.
211 Udp6BuildIp6ConfigData (UdpConfigData
, &Ip6ConfigData
);
214 // Configure the Ip instance wrapped in the IpInfo.
216 Status
= IpIoConfigIp (Instance
->IpInfo
, &Ip6ConfigData
);
217 if (EFI_ERROR (Status
)) {
218 if (Status
== EFI_NO_MAPPING
) {
219 Instance
->IsNoMapping
= TRUE
;
225 Instance
->IsNoMapping
= FALSE
;
228 // Save the configuration data.
231 &Instance
->ConfigData
,
233 sizeof (EFI_UDP6_CONFIG_DATA
)
235 IP6_COPY_ADDRESS (&Instance
->ConfigData
.StationAddress
, &Ip6ConfigData
.StationAddress
);
237 // Try to allocate the required port resource.
239 Status
= Udp6Bind (&Udp6Service
->ChildrenList
, &Instance
->ConfigData
);
240 if (EFI_ERROR (Status
)) {
242 // Reset the ip instance if bind fails.
244 IpIoConfigIp (Instance
->IpInfo
, NULL
);
249 // Pre calculate the checksum for the pseudo head, ignore the UDP length first.
251 IP6_COPY_ADDRESS (&LocalAddr
, &Instance
->ConfigData
.StationAddress
);
252 IP6_COPY_ADDRESS (&RemoteAddr
, &Instance
->ConfigData
.RemoteAddress
);
254 Instance
->HeadSum
= NetIp6PseudoHeadChecksum (
261 Instance
->Configured
= TRUE
;
265 // UdpConfigData is NULL, reset the instance.
267 Instance
->Configured
= FALSE
;
268 Instance
->IsNoMapping
= FALSE
;
271 // Reset the Ip instance wrapped in the IpInfo.
273 IpIoConfigIp (Instance
->IpInfo
, NULL
);
276 // Cancel all the user tokens.
278 Status
= Instance
->Udp6Proto
.Cancel (&Instance
->Udp6Proto
, NULL
);
281 // Remove the buffered RxData for this instance.
283 Udp6FlushRcvdDgram (Instance
);
285 ASSERT (IsListEmpty (&Instance
->DeliveredDgramQue
));
288 Status
= Udp6SetVariableData (Instance
->Udp6Service
);
292 gBS
->RestoreTPL (OldTpl
);
299 This function is used to enable and disable the multicast group filtering.
301 @param[in] This Pointer to the EFI_UDP6_PROTOCOL instance.
302 @param[in] JoinFlag Set to TRUE to join a multicast group. Set to
303 FALSE to leave one or all multicast groups.
304 @param[in] MulticastAddress Pointer to multicast group address to join or
305 leave. This parameter is optional and may be NULL.
307 @retval EFI_SUCCESS The operation completed successfully.
308 @retval EFI_NOT_STARTED The EFI UDPv6 Protocol instance has not been
310 @retval EFI_OUT_OF_RESOURCES Could not allocate resources to join the group.
311 @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:
313 JoinFlag is TRUE and MulticastAddress is NULL.
314 JoinFlag is TRUE and *MulticastAddress is not a
315 valid multicast address.
316 @retval EFI_ALREADY_STARTED The group address is already in the group table
317 (when JoinFlag is TRUE).
318 @retval EFI_NOT_FOUND The group address is not in the group table (when
320 @retval EFI_DEVICE_ERROR An unexpected system or network error occurred.
326 IN EFI_UDP6_PROTOCOL
*This
,
328 IN EFI_IPv6_ADDRESS
*MulticastAddress OPTIONAL
332 UDP6_INSTANCE_DATA
*Instance
;
333 EFI_IP6_PROTOCOL
*Ip
;
335 EFI_IPv6_ADDRESS
*McastIp
;
337 if ((This
== NULL
) || (JoinFlag
&& (MulticastAddress
== NULL
))) {
338 return EFI_INVALID_PARAMETER
;
344 if (!IP6_IS_MULTICAST (MulticastAddress
)) {
345 return EFI_INVALID_PARAMETER
;
348 McastIp
= AllocateCopyPool (sizeof (EFI_IPv6_ADDRESS
), MulticastAddress
);
349 if (McastIp
== NULL
) {
350 return EFI_OUT_OF_RESOURCES
;
354 Instance
= UDP6_INSTANCE_DATA_FROM_THIS (This
);
355 if (!Instance
->Configured
) {
356 return EFI_NOT_STARTED
;
359 Ip
= Instance
->IpInfo
->Ip
.Ip6
;
361 OldTpl
= gBS
->RaiseTPL (TPL_CALLBACK
);
364 // Invoke the Ip instance the Udp6 instance consumes to do the group operation.
366 Status
= Ip
->Groups (Ip
, JoinFlag
, MulticastAddress
);
368 if (EFI_ERROR (Status
)) {
373 // Keep a local copy of the configured multicast IPs because IpIo receives
374 // datagrams from the 0 station address IP instance and then UDP delivers to
375 // the matched instance. This copy of multicast IPs is used to avoid receive
376 // the mutlicast datagrams destinated to multicast IPs the other instances configured.
380 Status
= NetMapInsertTail (&Instance
->McastIps
, (VOID
*) McastIp
, NULL
);
383 NetMapIterate (&Instance
->McastIps
, Udp6LeaveGroup
, MulticastAddress
);
388 gBS
->RestoreTPL (OldTpl
);
390 if (EFI_ERROR (Status
)) {
391 if (McastIp
!= NULL
) {
402 This function places a sending request to this instance of the EFI UDPv6 Protocol,
403 alongside the transmit data that was filled by the user.
405 @param[in] This Pointer to the EFI_UDP6_PROTOCOL instance.
406 @param[in] Token Pointer to the completion token that will be
407 placed into the transmit queue.
409 @retval EFI_SUCCESS The data was queued for transmission.
410 @retval EFI_NOT_STARTED This EFI UDPv6 Protocol instance has not been
412 @retval EFI_NO_MAPPING The under-layer IPv6 driver was responsible for
413 choosing a source address for this instance, but
414 no source address was available for use.
415 @retval EFI_INVALID_PARAMETER One or more of the following are TRUE:
417 Token is NULL. Token.Event is NULL.
418 Token.Packet.TxData is NULL.
419 Token.Packet.TxData.FragmentCount is zero.
420 Token.Packet.TxData.DataLength is not equal to the
421 sum of fragment lengths.
423 Token.Packet.TxData.FragmentTable[].FragmentLength
426 Token.Packet.TxData.FragmentTable[].FragmentBuffer
427 fields is NULL. One or more of the
428 Token.Packet.TxData.UdpSessionData.DestinationAddres
429 are not valid unicast IPv6
430 addresses if the UdpSessionData is not NULL.
431 Token.Packet.TxData.UdpSessionData.
432 DestinationAddress is NULL
433 Token.Packet.TxData.UdpSessionData.
436 Token.Packet.TxData.UdpSessionData is NULL and this
437 instance's UdpConfigData.RemoteAddress is unspecified.
438 @retval EFI_ACCESS_DENIED The transmit completion token with the same
439 Token.Event is already in the transmit queue.
440 @retval EFI_NOT_READY The completion token could not be queued because
441 the transmit queue is full.
442 @retval EFI_OUT_OF_RESOURCES Could not queue the transmit data.
443 @retval EFI_NOT_FOUND There is no route to the destination network or
445 @retval EFI_BAD_BUFFER_SIZE The data length is greater than the maximum UDP
446 packet size. Or, the length of the IP header + UDP
447 header + data length is greater than MTU if
448 DoNotFragment is TRUE.
454 IN EFI_UDP6_PROTOCOL
*This
,
455 IN EFI_UDP6_COMPLETION_TOKEN
*Token
459 UDP6_INSTANCE_DATA
*Instance
;
462 EFI_UDP_HEADER
*Udp6Header
;
463 EFI_UDP6_CONFIG_DATA
*ConfigData
;
464 EFI_IPv6_ADDRESS Source
;
465 EFI_IPv6_ADDRESS Destination
;
466 EFI_UDP6_TRANSMIT_DATA
*TxData
;
467 EFI_UDP6_SESSION_DATA
*UdpSessionData
;
468 UDP6_SERVICE_DATA
*Udp6Service
;
469 IP_IO_OVERRIDE Override
;
471 EFI_IP_ADDRESS IpDestAddr
;
473 if ((This
== NULL
) || (Token
== NULL
)) {
474 return EFI_INVALID_PARAMETER
;
477 Instance
= UDP6_INSTANCE_DATA_FROM_THIS (This
);
479 if (!Instance
->Configured
) {
480 return EFI_NOT_STARTED
;
483 OldTpl
= gBS
->RaiseTPL (TPL_CALLBACK
);
486 // Validate the Token, if the token is invalid return the error code.
488 Status
= Udp6ValidateTxToken (Instance
, Token
);
489 if (EFI_ERROR (Status
)) {
493 if (EFI_ERROR (NetMapIterate (&Instance
->TxTokens
, Udp6TokenExist
, Token
)) ||
494 EFI_ERROR (NetMapIterate (&Instance
->RxTokens
, Udp6TokenExist
, Token
))
497 // Try to find a duplicate token in the two token maps, if found, return
498 // EFI_ACCESS_DENIED.
500 Status
= EFI_ACCESS_DENIED
;
504 TxData
= Token
->Packet
.TxData
;
507 // Create a net buffer to hold the user buffer and the udp header.
509 Packet
= NetbufFromExt (
510 (NET_FRAGMENT
*) TxData
->FragmentTable
,
511 TxData
->FragmentCount
,
514 Udp6NetVectorExtFree
,
517 if (Packet
== NULL
) {
518 Status
= EFI_OUT_OF_RESOURCES
;
523 // Store the IpIo in ProtoData.
525 Udp6Service
= Instance
->Udp6Service
;
526 *((UINTN
*) &Packet
->ProtoData
[0]) = (UINTN
) (Udp6Service
->IpIo
);
528 Udp6Header
= (EFI_UDP_HEADER
*) NetbufAllocSpace (Packet
, UDP6_HEADER_SIZE
, TRUE
);
529 ASSERT (Udp6Header
!= NULL
);
530 ConfigData
= &Instance
->ConfigData
;
533 // Fill the udp header.
535 Udp6Header
->SrcPort
= HTONS (ConfigData
->StationPort
);
536 Udp6Header
->DstPort
= HTONS (ConfigData
->RemotePort
);
537 Udp6Header
->Length
= HTONS ((UINT16
) Packet
->TotalSize
);
538 Udp6Header
->Checksum
= 0;
540 // Set the UDP Header in NET_BUF, this UDP header is for IP6 can fast get the
541 // Udp header for pseudoHeadCheckSum.
543 Packet
->Udp
= Udp6Header
;
544 UdpSessionData
= TxData
->UdpSessionData
;
546 if (UdpSessionData
!= NULL
) {
548 // Set the Destination according to the specified
552 if (UdpSessionData
->DestinationPort
!= 0) {
553 Udp6Header
->DstPort
= HTONS (UdpSessionData
->DestinationPort
);
556 IP6_COPY_ADDRESS (&Source
, &ConfigData
->StationAddress
);
557 if (!NetIp6IsUnspecifiedAddr (&UdpSessionData
->DestinationAddress
)) {
558 IP6_COPY_ADDRESS (&Destination
, &UdpSessionData
->DestinationAddress
);
560 IP6_COPY_ADDRESS (&Destination
, &ConfigData
->RemoteAddress
);
564 //Calculate the pseudo head checksum using the overridden parameters.
566 if (!NetIp6IsUnspecifiedAddr (&ConfigData
->StationAddress
)) {
567 HeadSum
= NetIp6PseudoHeadChecksum (
575 // calculate the checksum.
577 Udp6Header
->Checksum
= Udp6Checksum (Packet
, HeadSum
);
578 if (Udp6Header
->Checksum
== 0) {
580 // If the calculated checksum is 0, fill the Checksum field with all ones.
582 Udp6Header
->Checksum
= 0XFFFF;
586 // Set the checksum is zero if the ConfigData->StationAddress is unspcified
587 // and the Ipv6 will fill the correct value of this checksum.
589 Udp6Header
->Checksum
= 0;
594 // UdpSessionData is NULL, use the address and port information previously configured.
596 IP6_COPY_ADDRESS (&Destination
, &ConfigData
->RemoteAddress
);
598 HeadSum
= Instance
->HeadSum
;
600 // calculate the checksum.
602 Udp6Header
->Checksum
= Udp6Checksum (Packet
, HeadSum
);
603 if (Udp6Header
->Checksum
== 0) {
605 // If the calculated checksum is 0, fill the Checksum field with all ones.
607 Udp6Header
->Checksum
= 0xffff;
614 // Fill the IpIo Override data.
616 Override
.Ip6OverrideData
.Protocol
= EFI_IP_PROTO_UDP
;
617 Override
.Ip6OverrideData
.HopLimit
= ConfigData
->HopLimit
;
618 Override
.Ip6OverrideData
.FlowLabel
= 0;
621 // Save the token into the TxToken map.
623 Status
= NetMapInsertTail (&Instance
->TxTokens
, Token
, Packet
);
624 if (EFI_ERROR (Status
)) {
629 // Send out this datagram through IpIo.
631 if (UdpSessionData
!= NULL
){
632 IP6_COPY_ADDRESS (&(IpDestAddr
.v6
), &Destination
);
634 ZeroMem (&IpDestAddr
.v6
, sizeof (EFI_IPv6_ADDRESS
));
646 if (EFI_ERROR (Status
)) {
648 // Remove this token from the TxTokens.
650 Udp6RemoveToken (&Instance
->TxTokens
, Token
);
659 gBS
->RestoreTPL (OldTpl
);
666 This function places a completion token into the receive packet queue. This function
667 is always asynchronous.
669 @param[in] This Pointer to the EFI_UDP6_PROTOCOL instance.
670 @param[in] Token Pointer to a token that is associated with the
671 receive data descriptor.
673 @retval EFI_SUCCESS The receive completion token was cached.
674 @retval EFI_NOT_STARTED This EFI UDPv6 Protocol instance has not been
676 @retval EFI_NO_MAPPING When using a default address, configuration (DHCP,
677 BOOTP, RARP, etc.) is not finished yet.
678 @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:
679 This is NULL. Token is NULL. Token.Event is NULL.
680 @retval EFI_OUT_OF_RESOURCES The receive completion token could not be queued
681 due to a lack of system resources (usually
683 @retval EFI_DEVICE_ERROR An unexpected system or network error occurred.
684 The EFI UDPv6 Protocol instance has been reset to
686 @retval EFI_ACCESS_DENIED A receive completion token with the same
687 Token.Event is already in the receive queue.
688 @retval EFI_NOT_READY The receive request could not be queued because
689 the receive queue is full.
695 IN EFI_UDP6_PROTOCOL
*This
,
696 IN EFI_UDP6_COMPLETION_TOKEN
*Token
700 UDP6_INSTANCE_DATA
*Instance
;
703 if ((This
== NULL
) || (Token
== NULL
) || (Token
->Event
== NULL
)) {
704 return EFI_INVALID_PARAMETER
;
707 Instance
= UDP6_INSTANCE_DATA_FROM_THIS (This
);
709 if (!Instance
->Configured
) {
710 return EFI_NOT_STARTED
;
713 OldTpl
= gBS
->RaiseTPL (TPL_CALLBACK
);
715 if (EFI_ERROR (NetMapIterate (&Instance
->RxTokens
, Udp6TokenExist
, Token
)) ||
716 EFI_ERROR (NetMapIterate (&Instance
->TxTokens
, Udp6TokenExist
, Token
))
719 // Return EFI_ACCESS_DENIED if the specified token is already in the TxTokens or
722 Status
= EFI_ACCESS_DENIED
;
726 Token
->Packet
.RxData
= NULL
;
729 // Save the token into the RxTokens map.
731 Status
= NetMapInsertTail (&Instance
->RxTokens
, Token
, NULL
);
732 if (EFI_ERROR (Status
)) {
733 Status
= EFI_NOT_READY
;
738 // If there is an icmp error, report it.
740 Udp6ReportIcmpError (Instance
);
743 // Try to delivered the received datagrams.
745 Udp6InstanceDeliverDgram (Instance
);
748 // Dispatch the DPC queued by the NotifyFunction of Token->Event.
754 gBS
->RestoreTPL (OldTpl
);
761 This function is used to abort a pending transmit or receive request.
763 @param[in] This Pointer to the EFI_UDP6_PROTOCOL instance.
764 @param[in] Token Pointer to a token that has been issued by
765 EFI_UDP6_PROTOCOL.Transmit() or
766 EFI_UDP6_PROTOCOL.Receive(). This parameter is
767 optional and may be NULL.
769 @retval EFI_SUCCESS The asynchronous I/O request was aborted, and
770 Token.Event was signaled. When Token is NULL, all
771 pending requests are aborted and their events are
773 @retval EFI_INVALID_PARAMETER This is NULL.
774 @retval EFI_NOT_STARTED This instance has not been started.
775 @retval EFI_NO_MAPPING When using the default address, configuration
776 (DHCP, BOOTP, RARP, etc.) is not finished yet.
777 @retval EFI_NOT_FOUND When Token is not NULL, the asynchronous I/O
778 request is not found in the transmit or receive
779 queue. It is either completed or not issued by
780 Transmit() or Receive().
786 IN EFI_UDP6_PROTOCOL
*This
,
787 IN EFI_UDP6_COMPLETION_TOKEN
*Token OPTIONAL
791 UDP6_INSTANCE_DATA
*Instance
;
795 return EFI_INVALID_PARAMETER
;
798 Instance
= UDP6_INSTANCE_DATA_FROM_THIS (This
);
800 if (!Instance
->Configured
) {
801 return EFI_NOT_STARTED
;
804 OldTpl
= gBS
->RaiseTPL (TPL_CALLBACK
);
807 // Cancle the tokens specified by Token for this instance.
809 Status
= Udp6InstanceCancelToken (Instance
, Token
);
812 // Dispatch the DPC queued by the NotifyFunction of the canceled token's events.
816 gBS
->RestoreTPL (OldTpl
);
823 This function can be used by network drivers and applications to increase the rate that
824 data packets are moved between the communications device and the transmit/receive queues.
826 @param[in] This Pointer to the EFI_UDP6_PROTOCOL instance.
828 @retval EFI_SUCCESS Incoming or outgoing data was processed.
829 @retval EFI_INVALID_PARAMETER This is NULL.
830 @retval EFI_DEVICE_ERROR An unexpected system or network error occurred.
831 @retval EFI_TIMEOUT Data was dropped out of the transmit and/or
838 IN EFI_UDP6_PROTOCOL
*This
841 UDP6_INSTANCE_DATA
*Instance
;
842 EFI_IP6_PROTOCOL
*Ip
;
845 return EFI_INVALID_PARAMETER
;
848 Instance
= UDP6_INSTANCE_DATA_FROM_THIS (This
);
849 Ip
= Instance
->IpInfo
->Ip
.Ip6
;
852 // Invode the Ip instance consumed by the udp instance to do the poll operation.
854 return Ip
->Poll (Ip
);