1 # This is NT32 FDF file
3 # Copyright (c) 2007, Intel Corporation
5 # All rights reserved. This program and the accompanying materials
6 # are licensed and made available under the terms and conditions of the BSD License
7 # which accompanies this distribution. The full text of the license may be found at
8 # http://opensource.org/licenses/bsd-license.php
10 # THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
11 # WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
14 ################################################################################
17 # The [FD] Section is made up of the definition statements and a
18 # description of what goes into the Flash Device Image. Each FD section
19 # defines one flash "device" image. A flash device image may be one of
20 # the following: Removable media bootable image (like a boot floppy
21 # image,) an Option ROM image (that would be "flashed" into an add-in
22 # card,) a System "Flash" image (that would be burned into a system's
23 # flash) or an Update ("Capsule") image that will be used to update and
24 # existing system flash.
26 ################################################################################
28 BaseAddress = 0x0|gEfiNt32PkgTokenSpaceGuid.PcdWinNtFdBaseAddress #The base address of the FLASH Device.
29 Size = 0x002a0000 #The size in bytes of the FLASH Device
34 ################################################################################
36 # Following are lists of FD Region layout which correspond to the locations of different
37 # images within the flash device.
39 # Regions must be defined in ascending order and may not overlap.
41 # A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
42 # the pipe "|" character, followed by the size of the region, also in hex with the leading
43 # "0x" characters. Like:
45 # PcdOffsetCName|PcdSizeCName
46 # RegionType <FV, DATA, or FILE>
48 ################################################################################
50 gEfiNt32PkgTokenSpaceGuid.PcdWinNtFlashFvRecoveryBase|gEfiNt32PkgTokenSpaceGuid.PcdWinNtFlashFvRecoverySize
54 gEfiNt32PkgTokenSpaceGuid.PcdWinNtFlashNvStorageVariableBase|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize
56 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
57 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
58 0x8d, 0x2b, 0xf1, 0xff, 0x96, 0x76, 0x8b, 0x4c,
59 0xa9, 0x85, 0x27, 0x47, 0x07, 0x5b, 0x4f, 0x50,
60 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00,
61 0x5f, 0x46, 0x56, 0x48, 0xff, 0x8c, 0xff, 0xff,
62 0x48, 0x00, 0x3b, 0x7c, 0x00, 0x00, 0x00, 0x01,
63 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00,
64 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
65 0x24, 0x56, 0x53, 0x53, 0xb8, 0xbf, 0x00, 0x00,
66 0x5a, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
70 gEfiNt32PkgTokenSpaceGuid.PcdWinNtFlashNvStorageEventLogBase|gEfiNt32PkgTokenSpaceGuid.PcdWinNtFlashNvStorageEventLogSize
73 gEfiNt32PkgTokenSpaceGuid.PcdWinNtFlashNvStorageFtwWorkingBase|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize
75 0x8d, 0x2b, 0xf1, 0xff, 0x96, 0x76, 0x8b, 0x4c,
76 0xa9, 0x85, 0x27, 0x47, 0x07, 0x5b, 0x4f, 0x50,
77 0xd2, 0x5f, 0x05, 0x9e, 0xfe, 0xff, 0xff, 0xff,
78 0xff, 0xff, 0xff, 0xff, 0xe0, 0x1f, 0x00, 0x00
82 gEfiNt32PkgTokenSpaceGuid.PcdWinNtFlashNvStorageFtwSpareBase|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize
84 ################################################################################
88 # [FV] section is used to define what components or modules are placed within a flash
89 # device file. This section also defines order the components and modules are positioned
90 # within the image. The [FV] section consists of define statements, set statements and
93 ################################################################################
95 FvAlignment = 16 #FV alignment and FV attributes setting.
101 WRITE_DISABLED_CAP = TRUE
102 WRITE_ENABLED_CAP = TRUE
104 WRITE_LOCK_CAP = TRUE
105 WRITE_LOCK_STATUS = TRUE
106 READ_DISABLED_CAP = TRUE
107 READ_ENABLED_CAP = TRUE
110 READ_LOCK_STATUS = TRUE
112 ################################################################################
114 # The INF statements point to EDK component and EDK II module INF files, which will be placed into this FV image.
115 # Parsing tools will scan the INF file to determine the type of component or module.
116 # The component or module type is used to reference the standard rules
117 # defined elsewhere in the FDF file.
119 # The format for INF statements is:
120 # INF $(PathAndInfFileName)
122 ################################################################################
126 INF MdeModulePkg/Core/Pei/PeiMain.inf
127 INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf
128 INF IntelFrameworkModulePkg/Universal/StatusCode/Pei/PeiStatusCode.inf
129 INF Nt32Pkg/BootModePei/BootModePei.inf
130 INF Nt32Pkg/WinNtFlashMapPei/WinNtFlashMapPei.inf
131 INF MdeModulePkg/Universal/MemoryTest/BaseMemoryTestPei/BaseMemoryTestPei.inf
132 INF MdeModulePkg/Universal/Variable/Pei/VariablePei.inf
133 INF Nt32Pkg/WinNtAutoScanPei/WinNtAutoScanPei.inf
134 INF Nt32Pkg/WinNtFirmwareVolumePei/WinNtFirmwareVolumePei.inf
135 INF Nt32Pkg/WinNtThunkPPIToProtocolPei/WinNtThunkPPIToProtocolPei.inf
136 INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf
141 INF MdeModulePkg/Core/Dxe/DxeMain.inf
142 INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf
143 INF Nt32Pkg/MetronomeDxe/MetronomeDxe.inf
144 INF Nt32Pkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
145 INF Nt32Pkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
146 INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
147 INF Nt32Pkg/FvbServicesRuntimeDxe/FvbServicesRuntimeDxe.inf
148 INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
149 INF IntelFrameworkModulePkg/Universal/DataHubDxe/DataHubDxe.inf
150 INF MdeModulePkg/Universal/EbcDxe/EbcDxe.inf
151 INF MdeModulePkg/Universal/MemoryTest/NullMemoryTestDxe/NullMemoryTestDxe.inf
152 INF IntelFrameworkModulePkg/Universal/HiiDataBaseDxe/HiiDatabase.inf
153 INF Nt32Pkg/WinNtThunkDxe/WinNtThunkDxe.inf
154 INF MdeModulePkg/Universal/FirmwareVolume/Crc32SectionExtractDxe/Crc32SectionExtractDxe.inf
155 INF Nt32Pkg/CpuRuntimeDxe/CpuRuntimeDxe.inf
156 INF Nt32Pkg/PlatformBdsDxe/PlatformBdsDxe.inf
157 INF MdeModulePkg/Universal/FirmwareVolume/FaultTolerantWriteDxe/FtwLite.inf
158 INF IntelFrameworkModulePkg/Universal/DataHubStdErrDxe/DataHubStdErrDxe.inf
159 INF Nt32Pkg/MiscSubClassPlatformDxe/MiscSubClassPlatformDxe.inf
160 INF Nt32Pkg/TimerDxe/TimerDxe.inf
161 INF IntelFrameworkModulePkg/Universal/StatusCode/Dxe/DxeStatusCode.inf
162 INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf
163 INF MdeModulePkg/Universal/WatchDogTimerDxe/WatchDogTimer.inf
164 INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf
165 INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
166 INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
167 INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
168 INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
169 INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
170 INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
171 INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
172 INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
173 INF IntelFrameworkModulePkg/Universal/SetupBrowserDxe/SetupBrowser.inf
174 INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
175 INF MdeModulePkg/Bus/Pci/AtapiPassThruDxe/AtapiPassThru.inf
176 INF IntelFrameworkModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf
177 INF MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBusDxe.inf ##This driver follows UEFI specification definition
178 INF MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf ##This driver follows UEFI specification definition
179 INF IntelFrameworkModulePkg/Bus/Pci/IdeBusDxe/IdeBusDxe.inf
180 INF Nt32Pkg/WinNtBusDriverDxe/WinNtBusDriverDxe.inf
181 INF Nt32Pkg/WinNtBlockIoDxe/WinNtBlockIoDxe.inf
182 INF Nt32Pkg/WinNtConsoleDxe/WinNtConsoleDxe.inf
183 INF Nt32Pkg/WinNtSerialIoDxe/WinNtSerialIoDxe.inf
184 INF Nt32Pkg/WinNtGopDxe/WinNtGopDxe.inf
185 INF Nt32Pkg/WinNtSimpleFileSystemDxe/WinNtSimpleFileSystemDxe.inf
186 INF IntelFrameworkModulePkg/Universal/DriverSampleDxe/DriverSampleDxe.inf
187 INF MdeModulePkg/Application/HelloWorld/HelloWorld.inf
189 ################################################################################
191 # FILE statements are provided so that a platform integrator can include
192 # complete EFI FFS files, as well as a method for constructing FFS files
193 # using curly "{}" brace scoping. The following three FILEs are
194 # for binary shell, binary fat and logo module.
196 ################################################################################
197 FILE APPLICATION = c57ad6b7-0515-40a8-9d21-551652854e37 {
198 SECTION COMPRESS PI_STD {
200 SECTION PE32 = EdkShellBinPkg/FullShell/ia32/Shell_Full.efi
204 FILE DRIVER = 961578FE-B6B7-44c3-AF35-6BC705CD2B1F {
205 SECTION COMPRESS PI_STD {
207 SECTION PE32 = FatBinPkg/EnhancedFatDxe/Ia32/Fat.efi
211 FILE FREEFORM = 7BB28B99-61BB-11D5-9A5D-0090273FC14D {
212 SECTION COMPRESS PI_STD {
214 SECTION RAW = MdeModulePkg/Logo/Logo.bmp
220 ################################################################################
222 # Rules are use with the [FV] section's module INF type to define
223 # how an FFS file is created for a given INF file. The following Rule are the default
224 # rules for the different module type. User can add the customized rules to define the
225 # content of the FFS file.
227 ################################################################################
230 ############################################################################
231 # Example of a DXE_DRIVER FFS file with a Checksum encapsulation section #
232 ############################################################################
234 #[Rule.Common.DXE_DRIVER]
235 # FILE DRIVER = $(NAMED_GUID) {
236 # DXE_DEPEX DXE_DEPEX Optional |.depex
240 # UI STRING="$(MODULE_NAME)" Optional
241 # VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
246 ############################################################################
248 [Rule.Common.PEI_CORE]
249 FILE PEI_CORE = $(NAMED_GUID) {
251 UI STRING ="$(MODULE_NAME)" Optional
252 VERSION STRING ="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
256 FILE PEIM = $(NAMED_GUID) {
257 PEI_DEPEX PEI_DEPEX Optional |.depex
259 UI STRING="$(MODULE_NAME)" Optional
260 VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
263 [Rule.Common.DXE_CORE]
264 FILE DXE_CORE = $(NAMED_GUID) {
267 UI STRING="$(MODULE_NAME)" Optional
268 VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
272 [Rule.Common.UEFI_DRIVER]
273 FILE DRIVER = $(NAMED_GUID) {
274 DXE_DEPEX DXE_DEPEX Optional |.depex
278 UI STRING="$(MODULE_NAME)" Optional
279 VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
284 [Rule.Common.DXE_DRIVER]
285 FILE DRIVER = $(NAMED_GUID) {
286 DXE_DEPEX DXE_DEPEX Optional |.depex
290 UI STRING="$(MODULE_NAME)" Optional
291 VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
296 [Rule.Common.DXE_RUNTIME_DRIVER]
297 FILE DRIVER = $(NAMED_GUID) {
298 DXE_DEPEX DXE_DEPEX Optional |.depex
302 UI STRING="$(MODULE_NAME)" Optional
303 VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
308 [Rule.Common.UEFI_APPLICATION]
309 FILE APPLICATION = $(NAMED_GUID) {
313 UI STRING="$(MODULE_NAME)" Optional
314 VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)