2 The EFI_FORM_CALLBACK_PROTOCOL is the defined interface for access to custom
3 NV storage devices as well as communication of user selections in a more
4 interactive environment. This protocol should be published by hardware
5 specific drivers which want to export access to custom hardware storage or
6 publish IFR which has a requirement to call back the original driver.
8 Copyright (c) 2006, Intel Corporation
9 All rights reserved. This program and the accompanying materials
10 are licensed and made available under the terms and conditions of the BSD License
11 which accompanies this distribution. The full text of the license may be found at
12 http://opensource.org/licenses/bsd-license.php
14 THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
15 WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
17 Module Name: FormCallback.h
19 @par Revision Reference:
20 This protocol is defined in HII spec 0.92.
24 #ifndef __FORM_CALLBACK_H__
25 #define __FORM_CALLBACK_H__
28 #define EFI_FORM_CALLBACK_PROTOCOL_GUID \
30 0xf3e4543d, 0xcf35, 0x6cef, {0x35, 0xc4, 0x4f, 0xe6, 0x34, 0x4d, 0xfc, 0x54 } \
34 // Forward reference for pure ANSI compatability
36 typedef struct _EFI_FORM_CALLBACK_PROTOCOL EFI_FORM_CALLBACK_PROTOCOL
;
39 #define RESET_REQUIRED 1 // Flags setting to signify that the callback operation resulted in an eventual
40 // reset to be done upon exit of the browser
42 #define EXIT_REQUIRED 2 // Flags setting to signify that after the processing of the callback results - exit the browser
43 #define SAVE_REQUIRED 4 // Flags setting to signify that after the processing of the callback results - save the NV data
44 #define NV_CHANGED 8 // Flags setting to signify that after the processing of the callback results - turn the NV flag on
45 #define NV_NOT_CHANGED 16 // Flags setting to signify that after the processing of the callback results - turn the NV flag off
48 UINT8 OpCode
; // Likely a string, numeric, or one-of
49 UINT8 Length
; // Length of the EFI_IFR_DATA_ENTRY packet
50 UINT16 Flags
; // Flags settings to determine what behavior is desired from the browser after the callback
51 VOID
*Data
; // The data in the form based on the op-code type - this is not a pointer to the data, the data follows immediately
52 // If the OpCode is a OneOf or Numeric type - Data is a UINT16 value
53 // If the OpCode is a String type - Data is a CHAR16[x] type
54 // If the OpCode is a Checkbox type - Data is a UINT8 value
55 // If the OpCode is a NV Access type - Data is a EFI_IFR_NV_DATA structure
60 VOID
*NvRamMap
; // If the flag of the op-code specified retrieval of a copy of the NVRAM map,
61 // this is a pointer to a buffer copy
63 UINT32 EntryCount
; // How many EFI_IFR_DATA_ENTRY entries
65 // EFI_IFR_DATA_ENTRY Data[1]; // The in-line Data entries.
70 EFI_IFR_DATA_ARRAY DataArray
; // Primarily used by those who call back to their drivers and use HII as a repository
71 EFI_IFR_PACKET DataPacket
; // Primarily used by those which do not use HII as a repository
72 CHAR16
*String
; // If returning an error - fill the string with null-terminated contents
73 } EFI_HII_CALLBACK_PACKET
;
76 EFI_IFR_OP_HEADER Header
;
77 UINT16 QuestionId
; // Offset into the map
78 UINT8 StorageWidth
; // Width of the value
80 // CHAR8 Data[1]; // The Data itself
86 // The following types are currently defined:
89 Returns the value of a variable.
91 @param This A pointer to the EFI_FORM_CALLBACK_PROTOCOL instance.
92 @param VariableName A NULL-terminated Unicode string that is the
93 name of the vendor's variable.
94 @param VendorGuid A unique identifier for the vendor.
95 @param Attributes If not NULL, a pointer to the memory location to
96 return the attribute's bit-mask for the variable.
97 @param DataSize The size in bytes of the Buffer. A size of zero causes
98 the variable to be deleted.
99 @param Buffer The buffer to return the contents of the variable.
101 @retval EFI_SUCCESS The function completed successfully.
102 @retval EFI_NOT_FOUND The variable was not found.
103 @retval EFI_BUFFER_TOO_SMALL The DataSize is too small for the result.
104 DataSize has been updated with the size needed to complete the request.
105 @retval EFI_INVALID_PARAMETER One of the parameters has an invalid value.
106 @retval EFI_DEVICE_ERROR The variable could not be saved due to a hardware failure.
111 (EFIAPI
*EFI_NV_READ
) (
112 IN EFI_FORM_CALLBACK_PROTOCOL
*This
,
113 IN CHAR16
*VariableName
,
114 IN EFI_GUID
*VendorGuid
,
115 OUT UINT32
*Attributes OPTIONAL
,
116 IN OUT UINTN
*DataSize
,
121 Sets the value of a variable.
123 @param This A pointer to the EFI_FORM_CALLBACK_PROTOCOL instance.
124 @param VariableName A NULL-terminated Unicode string that is the
125 name of the vendor's variable. Each VariableName is unique for each VendorGuid.
126 @param VendorGuid A unique identifier for the vendor.
127 @param Attributes Attributes bit-mask to set for the variable.
128 @param DataSize The size in bytes of the Buffer. A size of zero causes
129 the variable to be deleted.
130 @param Buffer The buffer containing the contents of the variable.
131 @param ResetRequired Returns a value from the driver that abstracts
132 this information and will enable a system to know if a system reset
133 is required to achieve the configuration changes being enabled through
136 @retval EFI_SUCCESS The firmware has successfully stored the variable and
137 its data as defined by the Attributes.
138 @retval EFI_OUT_OF_RESOURCES Not enough storage is available to hold
139 the variable and its data.
140 @retval EFI_INVALID_PARAMETER An invalid combination of Attributes bits
141 was supplied, or the DataSize exceeds the maximum allowed.
142 @retval EFI_DEVICE_ERROR The variable could not be saved due to a hardware failure.
147 (EFIAPI
*EFI_NV_WRITE
) (
148 IN EFI_FORM_CALLBACK_PROTOCOL
*This
,
149 IN CHAR16
*VariableName
,
150 IN EFI_GUID
*VendorGuid
,
151 IN UINT32 Attributes
,
154 OUT BOOLEAN
*ResetRequired
158 This function is called to provide results data to the driver.
160 @param This A pointer to the EFI_FORM_CALLBACK_PROTOCOL instance.
161 @param KeyValue A unique value which is sent to the original exporting
162 driver so that it can identify the type of data to expect. The format of
163 the data tends to vary based on the opcode that generated the callback.
164 @param Data A pointer to the data being sent to the original exporting driver.
165 @param Packet A pointer to a packet of information which a driver passes
173 (EFIAPI
*EFI_FORM_CALLBACK
) (
174 IN EFI_FORM_CALLBACK_PROTOCOL
*This
,
176 IN EFI_IFR_DATA_ARRAY
*Data
,
177 OUT EFI_HII_CALLBACK_PACKET
**Packet
181 @par Protocol Description:
182 The EFI_FORM_CALLBACK_PROTOCOL is the defined interface for access to
183 custom NVS devices as well as communication of user selections in a more
184 interactive environment. This protocol should be published by hardware-specific
185 drivers that want to export access to custom hardware storage or publish IFR
186 that has a requirement to call back the original driver.
189 The read operation to access the NV data serviced by a hardware-specific driver.
192 The write operation to access the NV data serviced by a hardware-specific driver.
195 The function that is called from the configuration browser to communicate key value pairs.
198 struct _EFI_FORM_CALLBACK_PROTOCOL
{
200 EFI_NV_WRITE NvWrite
;
201 EFI_FORM_CALLBACK Callback
;
204 extern EFI_GUID gEfiFormCallbackProtocolGuid
;