2 Type and macro definitions specific to the Virtio Filesystem device.
4 At the time of this writing, the latest released Virtio specification (v1.1)
5 does not include the virtio-fs device. The development version of the
6 specification defines it however; see the latest version at
7 <https://github.com/oasis-tcs/virtio-spec/blob/87fa6b5d8155/virtio-fs.tex>.
9 This header file is minimal, and only defines the types and macros that are
10 necessary for the OvmfPkg implementation.
12 Copyright (C) 2020, Red Hat, Inc.
14 SPDX-License-Identifier: BSD-2-Clause-Patent
20 #include <IndustryStandard/Virtio.h>
23 // Lowest numbered queue for sending normal priority requests.
25 #define VIRTIO_FS_REQUEST_QUEUE 1
28 // Number of bytes in the "VIRTIO_FS_CONFIG.Tag" field.
30 #define VIRTIO_FS_TAG_BYTES 36
33 // Device configuration layout.
38 // The Tag field can be considered the filesystem label, or a mount point
39 // hint. It is UTF-8 encoded, and padded to full size with NUL bytes. If the
40 // encoded bytes take up the entire Tag field, then there is no NUL
43 UINT8 Tag
[VIRTIO_FS_TAG_BYTES
];
45 // The total number of request virtqueues exposed by the device (i.e.,
46 // excluding the "hiprio" queue).
53 // FUSE-related definitions follow.
55 // From virtio-v1.1-cs01-87fa6b5d8155, 5.11 File System Device: "[...] The
56 // driver acts as the FUSE client mounting the file system. The virtio file
57 // system device provides the mechanism for transporting FUSE requests [...]"
59 // Unfortunately, the documentation of the FUSE wire protocol is lacking. The
60 // Virtio spec (as of this writing) simply defers to
61 // "include/uapi/linux/fuse.h" in the Linux kernel source -- see the reference
62 // in virtio spec file "introduction.tex", at commit 87fa6b5d8155.
64 // Of course, "include/uapi/linux/fuse.h" is a moving target (the virtio spec
65 // does not specify a particular FUSE interface version). The OvmfPkg code
66 // targets version 7.31, because that's the lowest version that the QEMU
67 // virtio-fs daemon supports at this time -- see QEMU commit 72c42e2d6551
68 // ("virtiofsd: Trim out compatibility code", 2020-01-23).
70 // Correspondingly, Linux's "include/uapi/linux/fuse.h" is consulted as checked
71 // out at commit (c6ff213fe5b8^) = d78092e4937d ("fuse: fix page dereference
72 // after free", 2020-09-18); that is, right before commit c6ff213fe5b8 ("fuse:
73 // add submount support to <uapi/linux/fuse.h>", 2020-09-18) introduces FUSE
74 // interface version 7.32.
76 #define VIRTIO_FS_FUSE_MAJOR 7
77 #define VIRTIO_FS_FUSE_MINOR 31
80 // The inode number of the root directory.
82 #define VIRTIO_FS_FUSE_ROOT_DIR_NODE_ID 1
85 // Distinguished errno values.
87 #define VIRTIO_FS_FUSE_ERRNO_ENOENT (-2)
90 // File mode bitmasks.
92 #define VIRTIO_FS_FUSE_MODE_TYPE_MASK 0170000u
93 #define VIRTIO_FS_FUSE_MODE_TYPE_REG 0100000u
94 #define VIRTIO_FS_FUSE_MODE_TYPE_DIR 0040000u
95 #define VIRTIO_FS_FUSE_MODE_PERM_RWXU 0000700u
96 #define VIRTIO_FS_FUSE_MODE_PERM_RUSR 0000400u
97 #define VIRTIO_FS_FUSE_MODE_PERM_WUSR 0000200u
98 #define VIRTIO_FS_FUSE_MODE_PERM_RWXG 0000070u
99 #define VIRTIO_FS_FUSE_MODE_PERM_RGRP 0000040u
100 #define VIRTIO_FS_FUSE_MODE_PERM_WGRP 0000020u
101 #define VIRTIO_FS_FUSE_MODE_PERM_RWXO 0000007u
102 #define VIRTIO_FS_FUSE_MODE_PERM_ROTH 0000004u
103 #define VIRTIO_FS_FUSE_MODE_PERM_WOTH 0000002u
106 // Flags for VirtioFsFuseOpOpen.
108 #define VIRTIO_FS_FUSE_OPEN_REQ_F_RDONLY 0
109 #define VIRTIO_FS_FUSE_OPEN_REQ_F_RDWR 2
112 // FUSE operation codes.
115 VirtioFsFuseOpLookup
= 1,
116 VirtioFsFuseOpForget
= 2,
117 VirtioFsFuseOpGetAttr
= 3,
118 VirtioFsFuseOpMkDir
= 9,
119 VirtioFsFuseOpUnlink
= 10,
120 VirtioFsFuseOpRmDir
= 11,
121 VirtioFsFuseOpOpen
= 14,
122 VirtioFsFuseOpStatFs
= 17,
123 VirtioFsFuseOpRelease
= 18,
124 VirtioFsFuseOpFsync
= 20,
125 VirtioFsFuseOpFlush
= 25,
126 VirtioFsFuseOpInit
= 26,
127 VirtioFsFuseOpOpenDir
= 27,
128 VirtioFsFuseOpReleaseDir
= 29,
129 VirtioFsFuseOpFsyncDir
= 30,
130 VirtioFsFuseOpCreate
= 35,
131 } VIRTIO_FS_FUSE_OPCODE
;
135 // Request-response headers common to all request types.
146 } VIRTIO_FS_FUSE_REQUEST
;
152 } VIRTIO_FS_FUSE_RESPONSE
;
155 // Structure with which the Virtio Filesystem device reports a NodeId to the
156 // FUSE client (i.e., to the Virtio Filesystem driver). This structure is a
157 // part of the response headers for operations that inform the FUSE client of
165 UINT32 EntryValidNsec
;
166 UINT32 AttrValidNsec
;
167 } VIRTIO_FS_FUSE_NODE_RESPONSE
;
170 // Structure describing the host-side attributes of an inode. This structure is
171 // a part of the response headers for operations that inform the FUSE client of
191 } VIRTIO_FS_FUSE_ATTRIBUTES_RESPONSE
;
194 // Header for VirtioFsFuseOpForget.
197 UINT64 NumberOfLookups
;
198 } VIRTIO_FS_FUSE_FORGET_REQUEST
;
201 // Headers for VirtioFsFuseOpGetAttr.
207 } VIRTIO_FS_FUSE_GETATTR_REQUEST
;
211 UINT32 AttrValidNsec
;
213 } VIRTIO_FS_FUSE_GETATTR_RESPONSE
;
216 // Header for VirtioFsFuseOpMkDir.
221 } VIRTIO_FS_FUSE_MKDIR_REQUEST
;
224 // Headers for VirtioFsFuseOpOpen and VirtioFsFuseOpOpenDir.
229 } VIRTIO_FS_FUSE_OPEN_REQUEST
;
235 } VIRTIO_FS_FUSE_OPEN_RESPONSE
;
238 // Header for VirtioFsFuseOpStatFs.
251 } VIRTIO_FS_FUSE_STATFS_RESPONSE
;
254 // Header for VirtioFsFuseOpRelease and VirtioFsFuseOpReleaseDir.
261 } VIRTIO_FS_FUSE_RELEASE_REQUEST
;
264 // Header for VirtioFsFuseOpFsync and VirtioFsFuseOpFsyncDir.
270 } VIRTIO_FS_FUSE_FSYNC_REQUEST
;
273 // Header for VirtioFsFuseOpFlush.
280 } VIRTIO_FS_FUSE_FLUSH_REQUEST
;
283 // Headers for VirtioFsFuseOpInit.
290 } VIRTIO_FS_FUSE_INIT_REQUEST
;
297 UINT16 MaxBackground
;
298 UINT16 CongestionThreshold
;
304 } VIRTIO_FS_FUSE_INIT_RESPONSE
;
307 // Header for VirtioFsFuseOpCreate.
314 } VIRTIO_FS_FUSE_CREATE_REQUEST
;
317 #endif // VIRTIO_FS_H_