2 # Open Virtual Machine Firmware: FDF
4 # Copyright (c) 2006 - 2009, Intel Corporation
6 # All rights reserved. This program and the accompanying materials
7 # are licensed and made available under the terms and conditions of the BSD License
8 # which accompanies this distribution. The full text of the license may be found at
9 # http://opensource.org/licenses/bsd-license.php
11 # THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
12 # WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
16 ################################################################################
19 # The [FD] Section is made up of the definition statements and a
20 # description of what goes into the Flash Device Image. Each FD section
21 # defines one flash "device" image. A flash device image may be one of
22 # the following: Removable media bootable image (like a boot floppy
23 # image,) an Option ROM image (that would be "flashed" into an add-in
24 # card,) a System "Flash" image (that would be burned into a system's
25 # flash) or an Update ("Capsule") image that will be used to update and
26 # existing system flash.
28 ################################################################################
30 BaseAddress = 0xFFE00000 # The base address of the FLASH Device.
31 Size = 0x00200000 # The size in bytes of the FLASH Device
36 ################################################################################
38 # Following are lists of FD Region layout which correspond to the locations of different
39 # images within the flash device.
41 # Regions must be defined in ascending order and may not overlap.
43 # A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
44 # the pipe "|" character, followed by the size of the region, also in hex with the leading
45 # "0x" characters. Like:
47 # PcdOffsetCName|PcdSizeCName
48 # RegionType <FV, DATA, or FILE>
50 ################################################################################
52 gEfiUnixPkgTokenSpaceGuid.PcdUnixFlashFvRecoveryBase|gEfiUnixPkgTokenSpaceGuid.PcdUnixFlashFvRecoverySize
55 ################################################################################
59 # [FV] section is used to define what components or modules are placed within a flash
60 # device file. This section also defines order the components and modules are positioned
61 # within the image. The [FV] section consists of define statements, set statements and
64 ################################################################################
67 FvAlignment = 16 #FV alignment and FV attributes setting.
73 WRITE_DISABLED_CAP = TRUE
74 WRITE_ENABLED_CAP = TRUE
77 WRITE_LOCK_STATUS = TRUE
78 READ_DISABLED_CAP = TRUE
79 READ_ENABLED_CAP = TRUE
82 READ_LOCK_STATUS = TRUE
85 # Files to be placed in DXEFV
87 # This firmware volume will have files placed in it uncompressed,
88 # and then then entire firmware volume will be compressed in a
89 # single compression operation in order to achieve better
90 # overall compression.
94 INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf
95 INF IntelFrameworkModulePkg/Universal/DataHubDxe/DataHubDxe.inf
101 INF MdeModulePkg/Core/Dxe/DxeMain.inf
103 INF IntelFrameworkModulePkg/Universal/StatusCode/RuntimeDxe/StatusCodeRuntimeDxe.inf
104 INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf
106 INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
107 INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
108 INF IntelFrameworkModulePkg/Universal/DataHubDxe/DataHubDxe.inf
109 INF MdeModulePkg/Universal/EbcDxe/EbcDxe.inf
110 INF PcAtChipsetPkg/8259InterruptControllerDxe/8259.inf
111 INF UefiCpuPkg/CpuIoDxe/CpuIo.inf
112 INF UefiCpuPkg/CpuDxe/CpuDxe.inf
113 INF PcAtChipsetPkg/8254TimerDxe/8254Timer.inf
114 INF PcAtChipsetPkg/PciHostBridgeDxe/PciHostBridgeDxe.inf
115 INF IntelFrameworkModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf
116 INF PcAtChipsetPkg/KbcResetDxe/Reset.inf
117 INF MdeModulePkg/Universal/Metronome/Metronome.inf
118 INF PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcatRealTimeClockRuntimeDxe.inf
120 INF MdeModulePkg/Universal/Variable/EmuRuntimeDxe/EmuVariableRuntimeDxe.inf
121 INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
122 INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf
123 INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
124 INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
125 INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
126 INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
127 INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
128 INF IntelFrameworkModulePkg/Universal/BdsDxe/BdsDxe.inf
129 INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
130 INF MdeModulePkg/Universal/PrintDxe/PrintDxe.inf
131 INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
132 INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
133 INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
134 INF MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBusDxe.inf
135 INF MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf
136 INF IntelFrameworkModulePkg/Bus/Pci/IdeBusDxe/IdeBusDxe.inf
137 INF PcAtChipsetPkg/Bus/Pci/IdeControllerDxe/IdeControllerDxe.inf
138 INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
139 INF MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf
141 INF PcAtChipsetPkg/IsaAcpiDxe/IsaAcpi.inf
142 INF IntelFrameworkModulePkg/Bus/Isa/IsaBusDxe/IsaBusDxe.inf
143 INF IntelFrameworkModulePkg/Bus/Isa/IsaSerialDxe/IsaSerialDxe.inf
144 INF IntelFrameworkModulePkg/Bus/Isa/Ps2KeyboardDxe/Ps2keyboardDxe.inf
145 INF IntelFrameworkModulePkg/Bus/Isa/IsaFloppyDxe/IsaFloppyDxe.inf
147 INF MdeModulePkg/Universal/Acpi/AcpiTableDxe/AcpiTableDxe.inf
148 INF MdeModulePkg/Universal/Acpi/AcpiPlatformDxe/AcpiPlatformDxe.inf
149 INF RuleOverride=ACPITABLE OvmfPkg/AcpiTables/AcpiTables.inf
151 INF FatBinPkg/EnhancedFatDxe/Fat.inf
153 INF EdkShellBinPkg/FullShell/FullShell.inf
155 FILE FREEFORM = PCD(gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdLogoFile) {
156 SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE { # LzmaCompress
157 SECTION RAW = MdeModulePkg/Logo/Logo.bmp
161 ################################################################################
170 WRITE_DISABLED_CAP = TRUE
171 WRITE_ENABLED_CAP = TRUE
173 WRITE_LOCK_CAP = TRUE
174 WRITE_LOCK_STATUS = TRUE
175 READ_DISABLED_CAP = TRUE
176 READ_ENABLED_CAP = TRUE
179 READ_LOCK_STATUS = TRUE
182 # Files to be placed in MAINFV
184 # This firmware volume will have all the files placed in it which
185 # must not be compressed at the initial boot phase. The only
186 # exception to this is the compressed 'DXEFV'.
190 INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf
196 INF OvmfPkg/Sec/SecMain.inf
201 INF MdeModulePkg/Core/Pei/PeiMain.inf
202 INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf
203 INF IntelFrameworkModulePkg/Universal/StatusCode/Pei/StatusCodePei.inf
204 INF OvmfPkg/PlatformPei/PlatformPei.inf
205 INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf
208 # This file contains the compressed 'DXEFV', which is compressed
209 # in a single compression operation in order to achieve better
210 # overall compression.
212 FILE FV_IMAGE = 20bc8ac9-94d1-4208-ab28-5d673fd73486 {
213 SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE { # LzmaCompress
214 SECTION FV_IMAGE = DXEFV
218 INF RuleOverride=RESET_VECTOR OvmfPkg/ResetVector/Bin/ResetVector.inf
220 ################################################################################
222 # Rules are use with the [FV] section's module INF type to define
223 # how an FFS file is created for a given INF file. The following Rule are the default
224 # rules for the different module type. User can add the customized rules to define the
225 # content of the FFS file.
227 ################################################################################
229 [Rule.Common.PEI_CORE]
230 FILE PEI_CORE = $(NAMED_GUID) {
232 UI STRING ="$(MODULE_NAME)" Optional
233 VERSION STRING ="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
237 FILE SEC = $(NAMED_GUID) {
239 UI STRING ="$(MODULE_NAME)" Optional
240 VERSION STRING ="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
244 FILE PEIM = $(NAMED_GUID) {
245 PEI_DEPEX PEI_DEPEX Optional |.depex
247 UI STRING="$(MODULE_NAME)" Optional
248 VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
251 [Rule.Common.PEIM.TIANOCOMPRESSED]
252 FILE PEIM = $(NAMED_GUID) {
253 PEI_DEPEX PEI_DEPEX Optional |.depex
254 GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {
256 UI STRING="$(MODULE_NAME)" Optional
257 VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
261 [Rule.Common.DXE_CORE]
262 FILE DXE_CORE = $(NAMED_GUID) {
264 UI STRING="$(MODULE_NAME)" Optional
265 VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
268 [Rule.Common.UEFI_DRIVER]
269 FILE DRIVER = $(NAMED_GUID) {
270 DXE_DEPEX DXE_DEPEX Optional |.depex
272 UI STRING="$(MODULE_NAME)" Optional
273 VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
276 [Rule.Common.DXE_DRIVER]
277 FILE DRIVER = $(NAMED_GUID) {
278 DXE_DEPEX DXE_DEPEX Optional |.depex
280 UI STRING="$(MODULE_NAME)" Optional
281 VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
284 [Rule.Common.DXE_RUNTIME_DRIVER]
285 FILE DRIVER = $(NAMED_GUID) {
286 DXE_DEPEX DXE_DEPEX Optional |.depex
288 UI STRING="$(MODULE_NAME)" Optional
289 VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
292 [Rule.Common.UEFI_APPLICATION]
293 FILE APPLICATION = $(NAMED_GUID) {
295 UI STRING="$(MODULE_NAME)" Optional
296 VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
299 [Rule.Common.USER_DEFINED.ACPITABLE]
300 FILE FREEFORM = $(NAMED_GUID) {
305 [Rule.Common.SEC.RESET_VECTOR]
306 FILE RAW = $(NAMED_GUID) {
310 [OptionRom.CirrusLogic5446]
311 INF OptionRomPkg/CirrusLogic5430Dxe/CirrusLogic5430Dxe.inf {
312 PCI_DEVICE_ID = 0x00B8