2 * Copyright (c) 2016 QLogic Corporation.
6 * See LICENSE.qede_pmd for copyright and licensing details.
9 #ifndef __ECORE_L2_API_H__
10 #define __ECORE_L2_API_H__
12 #include "ecore_status.h"
13 #include "ecore_sp_api.h"
15 #ifndef __EXTRACT__LINUX__
19 ECORE_RSS_IPV4_TCP
= 0x4,
20 ECORE_RSS_IPV6_TCP
= 0x8,
21 ECORE_RSS_IPV4_UDP
= 0x10,
22 ECORE_RSS_IPV6_UDP
= 0x20,
25 /* Should be the same as ETH_RSS_IND_TABLE_ENTRIES_NUM */
26 #define ECORE_RSS_IND_TABLE_SIZE 128
27 #define ECORE_RSS_KEY_SIZE 10 /* size in 32b chunks */
30 struct ecore_queue_start_common_params
{
31 /* Should always be relative to entity sending this. */
35 /* Relative, but relevant only for PFs */
38 /* These are always absolute */
43 struct ecore_rxq_start_ret_params
{
44 void OSAL_IOMEM
*p_prod
;
48 struct ecore_txq_start_ret_params
{
49 void OSAL_IOMEM
*p_doorbell
;
53 struct ecore_rss_params
{
57 u8 update_rss_capabilities
;
58 u8 update_rss_ind_table
;
61 u8 rss_table_size_log
; /* The table size is 2 ^ rss_table_size_log */
63 /* Indirection table consist of rx queue handles */
64 void *rss_ind_table
[ECORE_RSS_IND_TABLE_SIZE
];
65 u32 rss_key
[ECORE_RSS_KEY_SIZE
];
68 struct ecore_sge_tpa_params
{
69 u8 max_buffers_per_cqe
;
74 u8 tpa_ipv4_tunn_en_flg
;
75 u8 tpa_ipv6_tunn_en_flg
;
77 u8 update_tpa_param_flg
;
79 u8 tpa_hdr_data_split_flg
;
80 u8 tpa_gro_consistent_flg
;
83 u16 tpa_min_size_to_start
;
84 u16 tpa_min_size_to_cont
;
87 enum ecore_filter_opcode
{
91 ECORE_FILTER_REPLACE
, /* Delete all MACs and add new one instead */
92 ECORE_FILTER_FLUSH
, /* Removes all filters */
95 enum ecore_filter_ucast_type
{
98 ECORE_FILTER_MAC_VLAN
,
99 ECORE_FILTER_INNER_MAC
,
100 ECORE_FILTER_INNER_VLAN
,
101 ECORE_FILTER_INNER_PAIR
,
102 ECORE_FILTER_INNER_MAC_VNI_PAIR
,
103 ECORE_FILTER_MAC_VNI_PAIR
,
105 ECORE_FILTER_UNUSED
, /* @DPDK */
108 struct ecore_filter_ucast
{
109 enum ecore_filter_opcode opcode
;
110 enum ecore_filter_ucast_type type
;
114 u8 vport_to_remove_from
;
115 unsigned char mac
[ETH_ALEN
];
121 struct ecore_filter_mcast
{
122 /* MOVE is not supported for multicast */
123 enum ecore_filter_opcode opcode
;
125 u8 vport_to_remove_from
;
127 #define ECORE_MAX_MC_ADDRS 64
128 unsigned char mac
[ECORE_MAX_MC_ADDRS
][ETH_ALEN
];
131 struct ecore_filter_accept_flags
{
132 u8 update_rx_mode_config
;
133 u8 update_tx_mode_config
;
136 #define ECORE_ACCEPT_NONE 0x01
137 #define ECORE_ACCEPT_UCAST_MATCHED 0x02
138 #define ECORE_ACCEPT_UCAST_UNMATCHED 0x04
139 #define ECORE_ACCEPT_MCAST_MATCHED 0x08
140 #define ECORE_ACCEPT_MCAST_UNMATCHED 0x10
141 #define ECORE_ACCEPT_BCAST 0x20
144 struct ecore_arfs_config_params
{
149 bool arfs_enable
; /* Enable or disable arfs mode */
152 /* Add / remove / move / remove-all unicast MAC-VLAN filters.
153 * FW will assert in the following cases, so driver should take care...:
154 * 1. Adding a filter to a full table.
155 * 2. Adding a filter which already exists on that vport.
156 * 3. Removing a filter which doesn't exist.
160 ecore_filter_ucast_cmd(struct ecore_dev
*p_dev
,
161 struct ecore_filter_ucast
*p_filter_cmd
,
162 enum spq_mode comp_mode
,
163 struct ecore_spq_comp_cb
*p_comp_data
);
165 /* Add / remove / move multicast MAC filters. */
167 ecore_filter_mcast_cmd(struct ecore_dev
*p_dev
,
168 struct ecore_filter_mcast
*p_filter_cmd
,
169 enum spq_mode comp_mode
,
170 struct ecore_spq_comp_cb
*p_comp_data
);
172 /* Set "accept" filters */
174 ecore_filter_accept_cmd(
175 struct ecore_dev
*p_dev
,
177 struct ecore_filter_accept_flags accept_flags
,
178 u8 update_accept_any_vlan
,
180 enum spq_mode comp_mode
,
181 struct ecore_spq_comp_cb
*p_comp_data
);
184 * @brief ecore_eth_rx_queue_start - RX Queue Start Ramrod
186 * This ramrod initializes an RX Queue for a VPort. An Assert is generated if
187 * the VPort ID is not currently initialized.
191 * @p_params Inputs; Relative for PF [SB being an exception]
192 * @param bd_max_bytes Maximum bytes that can be placed on a BD
193 * @param bd_chain_phys_addr Physical address of BDs for receive.
194 * @param cqe_pbl_addr Physical address of the CQE PBL Table.
195 * @param cqe_pbl_size Size of the CQE PBL Table
196 * @param p_ret_params Pointed struct to be filled with outputs.
198 * @return enum _ecore_status_t
201 ecore_eth_rx_queue_start(struct ecore_hwfn
*p_hwfn
,
203 struct ecore_queue_start_common_params
*p_params
,
205 dma_addr_t bd_chain_phys_addr
,
206 dma_addr_t cqe_pbl_addr
,
208 struct ecore_rxq_start_ret_params
*p_ret_params
);
211 * @brief ecore_eth_rx_queue_stop - This ramrod closes an Rx queue
214 * @param p_rxq Handler of queue to close
215 * @param eq_completion_only If True completion will be on
216 * EQe, if False completion will be
217 * on EQe if p_hwfn opaque
218 * different from the RXQ opaque
220 * @param cqe_completion If True completion will be
222 * @return enum _ecore_status_t
225 ecore_eth_rx_queue_stop(struct ecore_hwfn
*p_hwfn
,
227 bool eq_completion_only
,
228 bool cqe_completion
);
231 * @brief - TX Queue Start Ramrod
233 * This ramrod initializes a TX Queue for a VPort. An Assert is generated if
234 * the VPort is not currently initialized.
239 * @param tc traffic class to use with this L2 txq
240 * @param pbl_addr address of the pbl array
241 * @param pbl_size number of entries in pbl
242 * @param p_ret_params Pointer to fill the return parameters in.
244 * @return enum _ecore_status_t
247 ecore_eth_tx_queue_start(struct ecore_hwfn
*p_hwfn
,
249 struct ecore_queue_start_common_params
*p_params
,
253 struct ecore_txq_start_ret_params
*p_ret_params
);
256 * @brief ecore_eth_tx_queue_stop - closes a Tx queue
259 * @param p_txq - handle to Tx queue needed to be closed
261 * @return enum _ecore_status_t
263 enum _ecore_status_t
ecore_eth_tx_queue_stop(struct ecore_hwfn
*p_hwfn
,
266 enum ecore_tpa_mode
{
273 struct ecore_sp_vport_start_params
{
274 enum ecore_tpa_mode tpa_mode
;
275 bool remove_inner_vlan
; /* Inner VLAN removal is enabled */
276 bool tx_switching
; /* Vport supports tx-switching */
277 bool handle_ptp_pkts
; /* Handle PTP packets */
278 bool only_untagged
; /* Untagged pkt control */
279 bool drop_ttl0
; /* Drop packets with TTL = 0 */
280 u8 max_buffers_per_cqe
;
283 u8 vport_id
; /* VPORT ID */
284 u16 mtu
; /* VPORT MTU */
285 bool zero_placement_offset
;
289 /* Strict behavior on transmission errors */
290 bool b_err_illegal_vlan_mode
;
291 bool b_err_illegal_inband_mode
;
292 bool b_err_vlan_insert_with_inband
;
293 bool b_err_small_pkt
;
295 bool b_err_anti_spoof
;
296 bool b_err_ctrl_frame
;
300 * @brief ecore_sp_vport_start -
302 * This ramrod initializes a VPort. An Assert if generated if the Function ID
303 * of the VPort is not enabled.
306 * @param p_params VPORT start params
308 * @return enum _ecore_status_t
311 ecore_sp_vport_start(struct ecore_hwfn
*p_hwfn
,
312 struct ecore_sp_vport_start_params
*p_params
);
314 struct ecore_sp_vport_update_params
{
317 u8 update_vport_active_rx_flg
;
318 u8 vport_active_rx_flg
;
319 u8 update_vport_active_tx_flg
;
320 u8 vport_active_tx_flg
;
321 u8 update_inner_vlan_removal_flg
;
322 u8 inner_vlan_removal_flg
;
323 u8 silent_vlan_removal_flg
;
324 u8 update_default_vlan_enable_flg
;
325 u8 default_vlan_enable_flg
;
326 u8 update_default_vlan_flg
;
328 u8 update_tx_switching_flg
;
330 u8 update_approx_mcast_flg
;
331 u8 update_anti_spoofing_en_flg
;
333 u8 update_accept_any_vlan_flg
;
335 unsigned long bins
[8];
336 struct ecore_rss_params
*rss_params
;
337 struct ecore_filter_accept_flags accept_flags
;
338 struct ecore_sge_tpa_params
*sge_tpa_params
;
339 /* MTU change - notice this requires the vport to be disabled.
340 * If non-zero, value would be used.
346 * @brief ecore_sp_vport_update -
348 * This ramrod updates the parameters of the VPort. Every field can be updated
349 * independently, according to flags.
351 * This ramrod is also used to set the VPort state to active after creation.
352 * An Assert is generated if the VPort does not contain an RX queue.
357 * @return enum _ecore_status_t
360 ecore_sp_vport_update(struct ecore_hwfn
*p_hwfn
,
361 struct ecore_sp_vport_update_params
*p_params
,
362 enum spq_mode comp_mode
,
363 struct ecore_spq_comp_cb
*p_comp_data
);
365 * @brief ecore_sp_vport_stop -
367 * This ramrod closes a VPort after all its RX and TX queues are terminated.
368 * An Assert is generated if any queues are left open.
372 * @param vport_id VPort ID
374 * @return enum _ecore_status_t
376 enum _ecore_status_t
ecore_sp_vport_stop(struct ecore_hwfn
*p_hwfn
,
381 ecore_sp_eth_filter_ucast(struct ecore_hwfn
*p_hwfn
,
383 struct ecore_filter_ucast
*p_filter_cmd
,
384 enum spq_mode comp_mode
,
385 struct ecore_spq_comp_cb
*p_comp_data
);
388 * @brief ecore_sp_rx_eth_queues_update -
390 * This ramrod updates an RX queue. It is used for setting the active state
391 * of the queue and updating the TPA and SGE parameters.
393 * @note Final phase API.
396 * @param pp_rxq_handlers An array of queue handlers to be updated.
397 * @param num_rxqs number of queues to update.
398 * @param complete_cqe_flg Post completion to the CQE Ring if set
399 * @param complete_event_flg Post completion to the Event Ring if set
403 * @return enum _ecore_status_t
407 ecore_sp_eth_rx_queues_update(struct ecore_hwfn
*p_hwfn
,
408 void **pp_rxq_handlers
,
411 u8 complete_event_flg
,
412 enum spq_mode comp_mode
,
413 struct ecore_spq_comp_cb
*p_comp_data
);
415 void __ecore_get_vport_stats(struct ecore_hwfn
*p_hwfn
,
416 struct ecore_ptt
*p_ptt
,
417 struct ecore_eth_stats
*stats
,
418 u16 statistics_bin
, bool b_get_port_stats
);
420 void ecore_get_vport_stats(struct ecore_dev
*p_dev
,
421 struct ecore_eth_stats
*stats
);
423 void ecore_reset_vport_stats(struct ecore_dev
*p_dev
);
426 *@brief ecore_arfs_mode_configure -
428 *Enable or disable rfs mode. It must accept atleast one of tcp or udp true
429 *and atleast one of ipv4 or ipv6 true to enable rfs mode.
433 *@param p_cfg_params arfs mode configuration parameters.
436 void ecore_arfs_mode_configure(struct ecore_hwfn
*p_hwfn
,
437 struct ecore_ptt
*p_ptt
,
438 struct ecore_arfs_config_params
*p_cfg_params
);