update sources to ceph Nautilus 14.2.1

[ceph.git] / ceph / src / spdk / dpdk / drivers / net / bnx2x / bnx2x.c

/* SPDX-License-Identifier: BSD-3-Clause
 * Copyright (c) 2007-2013 Broadcom Corporation.
 *
 * Eric Davis        <edavis@broadcom.com>
 * David Christensen <davidch@broadcom.com>
 * Gary Zambrano     <zambrano@broadcom.com>
 *
 * Copyright (c) 2013-2015 Brocade Communications Systems, Inc.
 * Copyright (c) 2015-2018 Cavium Inc.
 * All rights reserved.
 * www.cavium.com
 */

#define BNX2X_DRIVER_VERSION "1.78.18"

#include "bnx2x.h"
#include "bnx2x_vfpf.h"
#include "ecore_sp.h"
#include "ecore_init.h"
#include "ecore_init_ops.h"

#include "rte_version.h"

#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <zlib.h>

#define BNX2X_PMD_VER_PREFIX "BNX2X PMD"
#define BNX2X_PMD_VERSION_MAJOR 1
#define BNX2X_PMD_VERSION_MINOR 0
#define BNX2X_PMD_VERSION_REVISION 6
#define BNX2X_PMD_VERSION_PATCH 1

static inline const char *
bnx2x_pmd_version(void)
{
        static char version[32];

        snprintf(version, sizeof(version), "%s %s_%d.%d.%d.%d",
                        BNX2X_PMD_VER_PREFIX,
                        BNX2X_DRIVER_VERSION,
                        BNX2X_PMD_VERSION_MAJOR,
                        BNX2X_PMD_VERSION_MINOR,
                        BNX2X_PMD_VERSION_REVISION,
                        BNX2X_PMD_VERSION_PATCH);

        return version;
}

static z_stream zlib_stream;

#define EVL_VLID_MASK 0x0FFF

#define BNX2X_DEF_SB_ATT_IDX 0x0001
#define BNX2X_DEF_SB_IDX     0x0002

/*
 * FLR Support - bnx2x_pf_flr_clnup() is called during nic_load in the per
 * function HW initialization.
 */
#define FLR_WAIT_USEC     10000 /* 10 msecs */
#define FLR_WAIT_INTERVAL 50    /* usecs */
#define FLR_POLL_CNT      (FLR_WAIT_USEC / FLR_WAIT_INTERVAL)   /* 200 */

struct pbf_pN_buf_regs {
        int pN;
        uint32_t init_crd;
        uint32_t crd;
        uint32_t crd_freed;
};

struct pbf_pN_cmd_regs {
        int pN;
        uint32_t lines_occup;
        uint32_t lines_freed;
};

/* resources needed for unloading a previously loaded device */

#define BNX2X_PREV_WAIT_NEEDED 1
rte_spinlock_t bnx2x_prev_mtx;
struct bnx2x_prev_list_node {
        LIST_ENTRY(bnx2x_prev_list_node) node;
        uint8_t bus;
        uint8_t slot;
        uint8_t path;
        uint8_t aer;
        uint8_t undi;
};

static LIST_HEAD(, bnx2x_prev_list_node) bnx2x_prev_list
        = LIST_HEAD_INITIALIZER(bnx2x_prev_list);

static int load_count[2][3] = { { 0 } };
        /* per-path: 0-common, 1-port0, 2-port1 */

static void bnx2x_cmng_fns_init(struct bnx2x_softc *sc, uint8_t read_cfg,
                                uint8_t cmng_type);
static int bnx2x_get_cmng_fns_mode(struct bnx2x_softc *sc);
static void storm_memset_cmng(struct bnx2x_softc *sc, struct cmng_init *cmng,
                              uint8_t port);
static void bnx2x_set_reset_global(struct bnx2x_softc *sc);
static void bnx2x_set_reset_in_progress(struct bnx2x_softc *sc);
static uint8_t bnx2x_reset_is_done(struct bnx2x_softc *sc, int engine);
static uint8_t bnx2x_clear_pf_load(struct bnx2x_softc *sc);
static uint8_t bnx2x_chk_parity_attn(struct bnx2x_softc *sc, uint8_t * global,
                                     uint8_t print);
static void bnx2x_int_disable(struct bnx2x_softc *sc);
static int bnx2x_release_leader_lock(struct bnx2x_softc *sc);
static void bnx2x_pf_disable(struct bnx2x_softc *sc);
static void bnx2x_update_rx_prod(struct bnx2x_softc *sc,
                                 struct bnx2x_fastpath *fp,
                                 uint16_t rx_bd_prod, uint16_t rx_cq_prod);
static void bnx2x_link_report(struct bnx2x_softc *sc);
void bnx2x_link_status_update(struct bnx2x_softc *sc);
static int bnx2x_alloc_mem(struct bnx2x_softc *sc);
static void bnx2x_free_mem(struct bnx2x_softc *sc);
static int bnx2x_alloc_fw_stats_mem(struct bnx2x_softc *sc);
static void bnx2x_free_fw_stats_mem(struct bnx2x_softc *sc);
static __rte_noinline
int bnx2x_nic_load(struct bnx2x_softc *sc);

static int bnx2x_handle_sp_tq(struct bnx2x_softc *sc);
static void bnx2x_handle_fp_tq(struct bnx2x_fastpath *fp, int scan_fp);
static void bnx2x_ack_sb(struct bnx2x_softc *sc, uint8_t igu_sb_id,
                         uint8_t storm, uint16_t index, uint8_t op,
                         uint8_t update);

int bnx2x_test_bit(int nr, volatile unsigned long *addr)
{
        int res;

        mb();
        res = ((*addr) & (1UL << nr)) != 0;
        mb();
        return res;
}

void bnx2x_set_bit(unsigned int nr, volatile unsigned long *addr)
{
        __sync_fetch_and_or(addr, (1UL << nr));
}

void bnx2x_clear_bit(int nr, volatile unsigned long *addr)
{
        __sync_fetch_and_and(addr, ~(1UL << nr));
}

int bnx2x_test_and_clear_bit(int nr, volatile unsigned long *addr)
{
        unsigned long mask = (1UL << nr);
        return __sync_fetch_and_and(addr, ~mask) & mask;
}

int bnx2x_cmpxchg(volatile int *addr, int old, int new)
{
        return __sync_val_compare_and_swap(addr, old, new);
}

int
bnx2x_dma_alloc(struct bnx2x_softc *sc, size_t size, struct bnx2x_dma *dma,
              const char *msg, uint32_t align)
{
        char mz_name[RTE_MEMZONE_NAMESIZE];
        const struct rte_memzone *z;

        dma->sc = sc;
        if (IS_PF(sc))
                snprintf(mz_name, sizeof(mz_name), "bnx2x%d_%s_%" PRIx64, SC_ABS_FUNC(sc), msg,
                        rte_get_timer_cycles());
        else
                snprintf(mz_name, sizeof(mz_name), "bnx2x%d_%s_%" PRIx64, sc->pcie_device, msg,
                        rte_get_timer_cycles());

        /* Caller must take care that strlen(mz_name) < RTE_MEMZONE_NAMESIZE */
        z = rte_memzone_reserve_aligned(mz_name, (uint64_t)size,
                                        SOCKET_ID_ANY,
                                        RTE_MEMZONE_IOVA_CONTIG, align);
        if (z == NULL) {
                PMD_DRV_LOG(ERR, "DMA alloc failed for %s", msg);
                return -ENOMEM;
        }
        dma->paddr = (uint64_t) z->iova;
        dma->vaddr = z->addr;

        PMD_DRV_LOG(DEBUG, "%s: virt=%p phys=%" PRIx64, msg, dma->vaddr, dma->paddr);

        return 0;
}

static int bnx2x_acquire_hw_lock(struct bnx2x_softc *sc, uint32_t resource)
{
        uint32_t lock_status;
        uint32_t resource_bit = (1 << resource);
        int func = SC_FUNC(sc);
        uint32_t hw_lock_control_reg;
        int cnt;

        PMD_INIT_FUNC_TRACE();

        /* validate the resource is within range */
        if (resource > HW_LOCK_MAX_RESOURCE_VALUE) {
                PMD_DRV_LOG(NOTICE,
                            "resource 0x%x > HW_LOCK_MAX_RESOURCE_VALUE",
                            resource);
                return -1;
        }

        if (func <= 5) {
                hw_lock_control_reg = (MISC_REG_DRIVER_CONTROL_1 + (func * 8));
        } else {
                hw_lock_control_reg =
                    (MISC_REG_DRIVER_CONTROL_7 + ((func - 6) * 8));
        }

        /* validate the resource is not already taken */
        lock_status = REG_RD(sc, hw_lock_control_reg);
        if (lock_status & resource_bit) {
                PMD_DRV_LOG(NOTICE,
                            "resource in use (status 0x%x bit 0x%x)",
                            lock_status, resource_bit);
                return -1;
        }

        /* try every 5ms for 5 seconds */
        for (cnt = 0; cnt < 1000; cnt++) {
                REG_WR(sc, (hw_lock_control_reg + 4), resource_bit);
                lock_status = REG_RD(sc, hw_lock_control_reg);
                if (lock_status & resource_bit) {
                        return 0;
                }
                DELAY(5000);
        }

        PMD_DRV_LOG(NOTICE, "Resource lock timeout!");
        return -1;
}

static int bnx2x_release_hw_lock(struct bnx2x_softc *sc, uint32_t resource)
{
        uint32_t lock_status;
        uint32_t resource_bit = (1 << resource);
        int func = SC_FUNC(sc);
        uint32_t hw_lock_control_reg;

        PMD_INIT_FUNC_TRACE();

        /* validate the resource is within range */
        if (resource > HW_LOCK_MAX_RESOURCE_VALUE) {
                PMD_DRV_LOG(NOTICE,
                            "resource 0x%x > HW_LOCK_MAX_RESOURCE_VALUE",
                            resource);
                return -1;
        }

        if (func <= 5) {
                hw_lock_control_reg = (MISC_REG_DRIVER_CONTROL_1 + (func * 8));
        } else {
                hw_lock_control_reg =
                    (MISC_REG_DRIVER_CONTROL_7 + ((func - 6) * 8));
        }

        /* validate the resource is currently taken */
        lock_status = REG_RD(sc, hw_lock_control_reg);
        if (!(lock_status & resource_bit)) {
                PMD_DRV_LOG(NOTICE,
                            "resource not in use (status 0x%x bit 0x%x)",
                            lock_status, resource_bit);
                return -1;
        }

        REG_WR(sc, hw_lock_control_reg, resource_bit);
        return 0;
}

/* copy command into DMAE command memory and set DMAE command Go */
void bnx2x_post_dmae(struct bnx2x_softc *sc, struct dmae_command *dmae, int idx)
{
        uint32_t cmd_offset;
        uint32_t i;

        cmd_offset = (DMAE_REG_CMD_MEM + (sizeof(struct dmae_command) * idx));
        for (i = 0; i < ((sizeof(struct dmae_command) / 4)); i++) {
                REG_WR(sc, (cmd_offset + (i * 4)), *(((uint32_t *) dmae) + i));
        }

        REG_WR(sc, dmae_reg_go_c[idx], 1);
}

uint32_t bnx2x_dmae_opcode_add_comp(uint32_t opcode, uint8_t comp_type)
{
        return opcode | ((comp_type << DMAE_COMMAND_C_DST_SHIFT) |
                          DMAE_COMMAND_C_TYPE_ENABLE);
}

uint32_t bnx2x_dmae_opcode_clr_src_reset(uint32_t opcode)
{
        return opcode & ~DMAE_COMMAND_SRC_RESET;
}

uint32_t
bnx2x_dmae_opcode(struct bnx2x_softc * sc, uint8_t src_type, uint8_t dst_type,
                uint8_t with_comp, uint8_t comp_type)
{
        uint32_t opcode = 0;

        opcode |= ((src_type << DMAE_COMMAND_SRC_SHIFT) |
                   (dst_type << DMAE_COMMAND_DST_SHIFT));

        opcode |= (DMAE_COMMAND_SRC_RESET | DMAE_COMMAND_DST_RESET);

        opcode |= (SC_PORT(sc) ? DMAE_CMD_PORT_1 : DMAE_CMD_PORT_0);

        opcode |= ((SC_VN(sc) << DMAE_COMMAND_E1HVN_SHIFT) |
                   (SC_VN(sc) << DMAE_COMMAND_DST_VN_SHIFT));

        opcode |= (DMAE_COM_SET_ERR << DMAE_COMMAND_ERR_POLICY_SHIFT);

#ifdef __BIG_ENDIAN
        opcode |= DMAE_CMD_ENDIANITY_B_DW_SWAP;
#else
        opcode |= DMAE_CMD_ENDIANITY_DW_SWAP;
#endif

        if (with_comp) {
                opcode = bnx2x_dmae_opcode_add_comp(opcode, comp_type);
        }

        return opcode;
}

static void
bnx2x_prep_dmae_with_comp(struct bnx2x_softc *sc, struct dmae_command *dmae,
                        uint8_t src_type, uint8_t dst_type)
{
        memset(dmae, 0, sizeof(struct dmae_command));

        /* set the opcode */
        dmae->opcode = bnx2x_dmae_opcode(sc, src_type, dst_type,
                                       TRUE, DMAE_COMP_PCI);

        /* fill in the completion parameters */
        dmae->comp_addr_lo = U64_LO(BNX2X_SP_MAPPING(sc, wb_comp));
        dmae->comp_addr_hi = U64_HI(BNX2X_SP_MAPPING(sc, wb_comp));
        dmae->comp_val = DMAE_COMP_VAL;
}

/* issue a DMAE command over the init channel and wait for completion */
static int
bnx2x_issue_dmae_with_comp(struct bnx2x_softc *sc, struct dmae_command *dmae)
{
        uint32_t *wb_comp = BNX2X_SP(sc, wb_comp);
        int timeout = CHIP_REV_IS_SLOW(sc) ? 400000 : 4000;

        /* reset completion */
        *wb_comp = 0;

        /* post the command on the channel used for initializations */
        bnx2x_post_dmae(sc, dmae, INIT_DMAE_C(sc));

        /* wait for completion */
        DELAY(500);

        while ((*wb_comp & ~DMAE_PCI_ERR_FLAG) != DMAE_COMP_VAL) {
                if (!timeout ||
                    (sc->recovery_state != BNX2X_RECOVERY_DONE &&
                     sc->recovery_state != BNX2X_RECOVERY_NIC_LOADING)) {
                        PMD_DRV_LOG(INFO, "DMAE timeout!");
                        return DMAE_TIMEOUT;
                }

                timeout--;
                DELAY(50);
        }

        if (*wb_comp & DMAE_PCI_ERR_FLAG) {
                PMD_DRV_LOG(INFO, "DMAE PCI error!");
                return DMAE_PCI_ERROR;
        }

        return 0;
}

void bnx2x_read_dmae(struct bnx2x_softc *sc, uint32_t src_addr, uint32_t len32)
{
        struct dmae_command dmae;
        uint32_t *data;
        uint32_t i;
        int rc;

        if (!sc->dmae_ready) {
                data = BNX2X_SP(sc, wb_data[0]);

                for (i = 0; i < len32; i++) {
                        data[i] = REG_RD(sc, (src_addr + (i * 4)));
                }

                return;
        }

        /* set opcode and fixed command fields */
        bnx2x_prep_dmae_with_comp(sc, &dmae, DMAE_SRC_GRC, DMAE_DST_PCI);

        /* fill in addresses and len */
        dmae.src_addr_lo = (src_addr >> 2);     /* GRC addr has dword resolution */
        dmae.src_addr_hi = 0;
        dmae.dst_addr_lo = U64_LO(BNX2X_SP_MAPPING(sc, wb_data));
        dmae.dst_addr_hi = U64_HI(BNX2X_SP_MAPPING(sc, wb_data));
        dmae.len = len32;

        /* issue the command and wait for completion */
        if ((rc = bnx2x_issue_dmae_with_comp(sc, &dmae)) != 0) {
                rte_panic("DMAE failed (%d)", rc);
        };
}

void
bnx2x_write_dmae(struct bnx2x_softc *sc, rte_iova_t dma_addr, uint32_t dst_addr,
               uint32_t len32)
{
        struct dmae_command dmae;
        int rc;

        if (!sc->dmae_ready) {
                ecore_init_str_wr(sc, dst_addr, BNX2X_SP(sc, wb_data[0]), len32);
                return;
        }

        /* set opcode and fixed command fields */
        bnx2x_prep_dmae_with_comp(sc, &dmae, DMAE_SRC_PCI, DMAE_DST_GRC);

        /* fill in addresses and len */
        dmae.src_addr_lo = U64_LO(dma_addr);
        dmae.src_addr_hi = U64_HI(dma_addr);
        dmae.dst_addr_lo = (dst_addr >> 2);     /* GRC addr has dword resolution */
        dmae.dst_addr_hi = 0;
        dmae.len = len32;

        /* issue the command and wait for completion */
        if ((rc = bnx2x_issue_dmae_with_comp(sc, &dmae)) != 0) {
                rte_panic("DMAE failed (%d)", rc);
        }
}

static void
bnx2x_write_dmae_phys_len(struct bnx2x_softc *sc, rte_iova_t phys_addr,
                        uint32_t addr, uint32_t len)
{
        uint32_t dmae_wr_max = DMAE_LEN32_WR_MAX(sc);
        uint32_t offset = 0;

        while (len > dmae_wr_max) {
                bnx2x_write_dmae(sc, (phys_addr + offset),      /* src DMA address */
                               (addr + offset), /* dst GRC address */
                               dmae_wr_max);
                offset += (dmae_wr_max * 4);
                len -= dmae_wr_max;
        }

        bnx2x_write_dmae(sc, (phys_addr + offset),      /* src DMA address */
                       (addr + offset), /* dst GRC address */
                       len);
}

void
bnx2x_set_ctx_validation(struct bnx2x_softc *sc, struct eth_context *cxt,
                       uint32_t cid)
{
        /* ustorm cxt validation */
        cxt->ustorm_ag_context.cdu_usage =
            CDU_RSRVD_VALUE_TYPE_A(HW_CID(sc, cid),
                                   CDU_REGION_NUMBER_UCM_AG,
                                   ETH_CONNECTION_TYPE);
        /* xcontext validation */
        cxt->xstorm_ag_context.cdu_reserved =
            CDU_RSRVD_VALUE_TYPE_A(HW_CID(sc, cid),
                                   CDU_REGION_NUMBER_XCM_AG,
                                   ETH_CONNECTION_TYPE);
}

static void
bnx2x_storm_memset_hc_timeout(struct bnx2x_softc *sc, uint8_t fw_sb_id,
                            uint8_t sb_index, uint8_t ticks)
{
        uint32_t addr =
            (BAR_CSTRORM_INTMEM +
             CSTORM_STATUS_BLOCK_DATA_TIMEOUT_OFFSET(fw_sb_id, sb_index));

        REG_WR8(sc, addr, ticks);
}

static void
bnx2x_storm_memset_hc_disable(struct bnx2x_softc *sc, uint16_t fw_sb_id,
                            uint8_t sb_index, uint8_t disable)
{
        uint32_t enable_flag =
            (disable) ? 0 : (1 << HC_INDEX_DATA_HC_ENABLED_SHIFT);
        uint32_t addr =
            (BAR_CSTRORM_INTMEM +
             CSTORM_STATUS_BLOCK_DATA_FLAGS_OFFSET(fw_sb_id, sb_index));
        uint8_t flags;

        /* clear and set */
        flags = REG_RD8(sc, addr);
        flags &= ~HC_INDEX_DATA_HC_ENABLED;
        flags |= enable_flag;
        REG_WR8(sc, addr, flags);
}

void
bnx2x_update_coalesce_sb_index(struct bnx2x_softc *sc, uint8_t fw_sb_id,
                             uint8_t sb_index, uint8_t disable, uint16_t usec)
{
        uint8_t ticks = (usec / 4);

        bnx2x_storm_memset_hc_timeout(sc, fw_sb_id, sb_index, ticks);

        disable = (disable) ? 1 : ((usec) ? 0 : 1);
        bnx2x_storm_memset_hc_disable(sc, fw_sb_id, sb_index, disable);
}

uint32_t elink_cb_reg_read(struct bnx2x_softc *sc, uint32_t reg_addr)
{
        return REG_RD(sc, reg_addr);
}

void elink_cb_reg_write(struct bnx2x_softc *sc, uint32_t reg_addr, uint32_t val)
{
        REG_WR(sc, reg_addr, val);
}

void
elink_cb_event_log(__rte_unused struct bnx2x_softc *sc,
                   __rte_unused const elink_log_id_t elink_log_id, ...)
{
        PMD_DRV_LOG(DEBUG, "ELINK EVENT LOG (%d)", elink_log_id);
}

static int bnx2x_set_spio(struct bnx2x_softc *sc, int spio, uint32_t mode)
{
        uint32_t spio_reg;

        /* Only 2 SPIOs are configurable */
        if ((spio != MISC_SPIO_SPIO4) && (spio != MISC_SPIO_SPIO5)) {
                PMD_DRV_LOG(NOTICE, "Invalid SPIO 0x%x", spio);
                return -1;
        }

        bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_SPIO);

        /* read SPIO and mask except the float bits */
        spio_reg = (REG_RD(sc, MISC_REG_SPIO) & MISC_SPIO_FLOAT);

        switch (mode) {
        case MISC_SPIO_OUTPUT_LOW:
                /* clear FLOAT and set CLR */
                spio_reg &= ~(spio << MISC_SPIO_FLOAT_POS);
                spio_reg |= (spio << MISC_SPIO_CLR_POS);
                break;

        case MISC_SPIO_OUTPUT_HIGH:
                /* clear FLOAT and set SET */
                spio_reg &= ~(spio << MISC_SPIO_FLOAT_POS);
                spio_reg |= (spio << MISC_SPIO_SET_POS);
                break;

        case MISC_SPIO_INPUT_HI_Z:
                /* set FLOAT */
                spio_reg |= (spio << MISC_SPIO_FLOAT_POS);
                break;

        default:
                break;
        }

        REG_WR(sc, MISC_REG_SPIO, spio_reg);
        bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_SPIO);

        return 0;
}

static int bnx2x_gpio_read(struct bnx2x_softc *sc, int gpio_num, uint8_t port)
{
        /* The GPIO should be swapped if swap register is set and active */
        int gpio_port = ((REG_RD(sc, NIG_REG_PORT_SWAP) &&
                          REG_RD(sc, NIG_REG_STRAP_OVERRIDE)) ^ port);
        int gpio_shift = gpio_num;
        if (gpio_port)
                gpio_shift += MISC_REGISTERS_GPIO_PORT_SHIFT;

        uint32_t gpio_mask = (1 << gpio_shift);
        uint32_t gpio_reg;

        if (gpio_num > MISC_REGISTERS_GPIO_3) {
                PMD_DRV_LOG(NOTICE, "Invalid GPIO %d", gpio_num);
                return -1;
        }

        /* read GPIO value */
        gpio_reg = REG_RD(sc, MISC_REG_GPIO);

        /* get the requested pin value */
        return ((gpio_reg & gpio_mask) == gpio_mask) ? 1 : 0;
}

static int
bnx2x_gpio_write(struct bnx2x_softc *sc, int gpio_num, uint32_t mode, uint8_t port)
{
        /* The GPIO should be swapped if swap register is set and active */
        int gpio_port = ((REG_RD(sc, NIG_REG_PORT_SWAP) &&
                          REG_RD(sc, NIG_REG_STRAP_OVERRIDE)) ^ port);
        int gpio_shift = gpio_num;
        if (gpio_port)
                gpio_shift += MISC_REGISTERS_GPIO_PORT_SHIFT;

        uint32_t gpio_mask = (1 << gpio_shift);
        uint32_t gpio_reg;

        if (gpio_num > MISC_REGISTERS_GPIO_3) {
                PMD_DRV_LOG(NOTICE, "Invalid GPIO %d", gpio_num);
                return -1;
        }

        bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_GPIO);

        /* read GPIO and mask except the float bits */
        gpio_reg = (REG_RD(sc, MISC_REG_GPIO) & MISC_REGISTERS_GPIO_FLOAT);

        switch (mode) {
        case MISC_REGISTERS_GPIO_OUTPUT_LOW:
                /* clear FLOAT and set CLR */
                gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS);
                gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_CLR_POS);
                break;

        case MISC_REGISTERS_GPIO_OUTPUT_HIGH:
                /* clear FLOAT and set SET */
                gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS);
                gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_SET_POS);
                break;

        case MISC_REGISTERS_GPIO_INPUT_HI_Z:
                /* set FLOAT */
                gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS);
                break;

        default:
                break;
        }

        REG_WR(sc, MISC_REG_GPIO, gpio_reg);
        bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_GPIO);

        return 0;
}

static int
bnx2x_gpio_mult_write(struct bnx2x_softc *sc, uint8_t pins, uint32_t mode)
{
        uint32_t gpio_reg;

        /* any port swapping should be handled by caller */

        bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_GPIO);

        /* read GPIO and mask except the float bits */
        gpio_reg = REG_RD(sc, MISC_REG_GPIO);
        gpio_reg &= ~(pins << MISC_REGISTERS_GPIO_FLOAT_POS);
        gpio_reg &= ~(pins << MISC_REGISTERS_GPIO_CLR_POS);
        gpio_reg &= ~(pins << MISC_REGISTERS_GPIO_SET_POS);

        switch (mode) {
        case MISC_REGISTERS_GPIO_OUTPUT_LOW:
                /* set CLR */
                gpio_reg |= (pins << MISC_REGISTERS_GPIO_CLR_POS);
                break;

        case MISC_REGISTERS_GPIO_OUTPUT_HIGH:
                /* set SET */
                gpio_reg |= (pins << MISC_REGISTERS_GPIO_SET_POS);
                break;

        case MISC_REGISTERS_GPIO_INPUT_HI_Z:
                /* set FLOAT */
                gpio_reg |= (pins << MISC_REGISTERS_GPIO_FLOAT_POS);
                break;

        default:
                PMD_DRV_LOG(NOTICE, "Invalid GPIO mode assignment %d", mode);
                bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_GPIO);
                return -1;
        }

        REG_WR(sc, MISC_REG_GPIO, gpio_reg);
        bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_GPIO);

        return 0;
}

static int
bnx2x_gpio_int_write(struct bnx2x_softc *sc, int gpio_num, uint32_t mode,
                   uint8_t port)
{
        /* The GPIO should be swapped if swap register is set and active */
        int gpio_port = ((REG_RD(sc, NIG_REG_PORT_SWAP) &&
                          REG_RD(sc, NIG_REG_STRAP_OVERRIDE)) ^ port);
        int gpio_shift = gpio_num;
        if (gpio_port)
                gpio_shift += MISC_REGISTERS_GPIO_PORT_SHIFT;

        uint32_t gpio_mask = (1 << gpio_shift);
        uint32_t gpio_reg;

        if (gpio_num > MISC_REGISTERS_GPIO_3) {
                PMD_DRV_LOG(NOTICE, "Invalid GPIO %d", gpio_num);
                return -1;
        }

        bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_GPIO);

        /* read GPIO int */
        gpio_reg = REG_RD(sc, MISC_REG_GPIO_INT);

        switch (mode) {
        case MISC_REGISTERS_GPIO_INT_OUTPUT_CLR:
                /* clear SET and set CLR */
                gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_INT_SET_POS);
                gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_INT_CLR_POS);
                break;

        case MISC_REGISTERS_GPIO_INT_OUTPUT_SET:
                /* clear CLR and set SET */
                gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_INT_CLR_POS);
                gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_INT_SET_POS);
                break;

        default:
                break;
        }

        REG_WR(sc, MISC_REG_GPIO_INT, gpio_reg);
        bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_GPIO);

        return 0;
}

uint32_t
elink_cb_gpio_read(struct bnx2x_softc * sc, uint16_t gpio_num, uint8_t port)
{
        return bnx2x_gpio_read(sc, gpio_num, port);
}

uint8_t elink_cb_gpio_write(struct bnx2x_softc * sc, uint16_t gpio_num, uint8_t mode,   /* 0=low 1=high */
                            uint8_t port)
{
        return bnx2x_gpio_write(sc, gpio_num, mode, port);
}

uint8_t
elink_cb_gpio_mult_write(struct bnx2x_softc * sc, uint8_t pins,
                         uint8_t mode /* 0=low 1=high */ )
{
        return bnx2x_gpio_mult_write(sc, pins, mode);
}

uint8_t elink_cb_gpio_int_write(struct bnx2x_softc * sc, uint16_t gpio_num, uint8_t mode,       /* 0=low 1=high */
                                uint8_t port)
{
        return bnx2x_gpio_int_write(sc, gpio_num, mode, port);
}

void elink_cb_notify_link_changed(struct bnx2x_softc *sc)
{
        REG_WR(sc, (MISC_REG_AEU_GENERAL_ATTN_12 +
                    (SC_FUNC(sc) * sizeof(uint32_t))), 1);
}

/* send the MCP a request, block until there is a reply */
uint32_t
elink_cb_fw_command(struct bnx2x_softc *sc, uint32_t command, uint32_t param)
{
        int mb_idx = SC_FW_MB_IDX(sc);
        uint32_t seq;
        uint32_t rc = 0;
        uint32_t cnt = 1;
        uint8_t delay = CHIP_REV_IS_SLOW(sc) ? 100 : 10;

        seq = ++sc->fw_seq;
        SHMEM_WR(sc, func_mb[mb_idx].drv_mb_param, param);
        SHMEM_WR(sc, func_mb[mb_idx].drv_mb_header, (command | seq));

        PMD_DRV_LOG(DEBUG,
                    "wrote command 0x%08x to FW MB param 0x%08x",
                    (command | seq), param);

        /* Let the FW do it's magic. GIve it up to 5 seconds... */
        do {
                DELAY(delay * 1000);
                rc = SHMEM_RD(sc, func_mb[mb_idx].fw_mb_header);
        } while ((seq != (rc & FW_MSG_SEQ_NUMBER_MASK)) && (cnt++ < 500));

        /* is this a reply to our command? */
        if (seq == (rc & FW_MSG_SEQ_NUMBER_MASK)) {
                rc &= FW_MSG_CODE_MASK;
        } else {
                /* Ruh-roh! */
                PMD_DRV_LOG(NOTICE, "FW failed to respond!");
                rc = 0;
        }

        return rc;
}

static uint32_t
bnx2x_fw_command(struct bnx2x_softc *sc, uint32_t command, uint32_t param)
{
        return elink_cb_fw_command(sc, command, param);
}

static void
__storm_memset_dma_mapping(struct bnx2x_softc *sc, uint32_t addr,
                           rte_iova_t mapping)
{
        REG_WR(sc, addr, U64_LO(mapping));
        REG_WR(sc, (addr + 4), U64_HI(mapping));
}

static void
storm_memset_spq_addr(struct bnx2x_softc *sc, rte_iova_t mapping,
                      uint16_t abs_fid)
{
        uint32_t addr = (XSEM_REG_FAST_MEMORY +
                         XSTORM_SPQ_PAGE_BASE_OFFSET(abs_fid));
        __storm_memset_dma_mapping(sc, addr, mapping);
}

static void
storm_memset_vf_to_pf(struct bnx2x_softc *sc, uint16_t abs_fid, uint16_t pf_id)
{
        REG_WR8(sc, (BAR_XSTRORM_INTMEM + XSTORM_VF_TO_PF_OFFSET(abs_fid)),
                pf_id);
        REG_WR8(sc, (BAR_CSTRORM_INTMEM + CSTORM_VF_TO_PF_OFFSET(abs_fid)),
                pf_id);
        REG_WR8(sc, (BAR_TSTRORM_INTMEM + TSTORM_VF_TO_PF_OFFSET(abs_fid)),
                pf_id);
        REG_WR8(sc, (BAR_USTRORM_INTMEM + USTORM_VF_TO_PF_OFFSET(abs_fid)),
                pf_id);
}

static void
storm_memset_func_en(struct bnx2x_softc *sc, uint16_t abs_fid, uint8_t enable)
{
        REG_WR8(sc, (BAR_XSTRORM_INTMEM + XSTORM_FUNC_EN_OFFSET(abs_fid)),
                enable);
        REG_WR8(sc, (BAR_CSTRORM_INTMEM + CSTORM_FUNC_EN_OFFSET(abs_fid)),
                enable);
        REG_WR8(sc, (BAR_TSTRORM_INTMEM + TSTORM_FUNC_EN_OFFSET(abs_fid)),
                enable);
        REG_WR8(sc, (BAR_USTRORM_INTMEM + USTORM_FUNC_EN_OFFSET(abs_fid)),
                enable);
}

static void
storm_memset_eq_data(struct bnx2x_softc *sc, struct event_ring_data *eq_data,
                     uint16_t pfid)
{
        uint32_t addr;
        size_t size;

        addr = (BAR_CSTRORM_INTMEM + CSTORM_EVENT_RING_DATA_OFFSET(pfid));
        size = sizeof(struct event_ring_data);
        ecore_storm_memset_struct(sc, addr, size, (uint32_t *) eq_data);
}

static void
storm_memset_eq_prod(struct bnx2x_softc *sc, uint16_t eq_prod, uint16_t pfid)
{
        uint32_t addr = (BAR_CSTRORM_INTMEM +
                         CSTORM_EVENT_RING_PROD_OFFSET(pfid));
        REG_WR16(sc, addr, eq_prod);
}

/*
 * Post a slowpath command.
 *
 * A slowpath command is used to propagate a configuration change through
 * the controller in a controlled manner, allowing each STORM processor and
 * other H/W blocks to phase in the change.  The commands sent on the
 * slowpath are referred to as ramrods.  Depending on the ramrod used the
 * completion of the ramrod will occur in different ways.  Here's a
 * breakdown of ramrods and how they complete:
 *
 * RAMROD_CMD_ID_ETH_PORT_SETUP
 *   Used to setup the leading connection on a port.  Completes on the
 *   Receive Completion Queue (RCQ) of that port (typically fp[0]).
 *
 * RAMROD_CMD_ID_ETH_CLIENT_SETUP
 *   Used to setup an additional connection on a port.  Completes on the
 *   RCQ of the multi-queue/RSS connection being initialized.
 *
 * RAMROD_CMD_ID_ETH_STAT_QUERY
 *   Used to force the storm processors to update the statistics database
 *   in host memory.  This ramrod is send on the leading connection CID and
 *   completes as an index increment of the CSTORM on the default status
 *   block.
 *
 * RAMROD_CMD_ID_ETH_UPDATE
 *   Used to update the state of the leading connection, usually to udpate
 *   the RSS indirection table.  Completes on the RCQ of the leading
 *   connection. (Not currently used under FreeBSD until OS support becomes
 *   available.)
 *
 * RAMROD_CMD_ID_ETH_HALT
 *   Used when tearing down a connection prior to driver unload.  Completes
 *   on the RCQ of the multi-queue/RSS connection being torn down.  Don't
 *   use this on the leading connection.
 *
 * RAMROD_CMD_ID_ETH_SET_MAC
 *   Sets the Unicast/Broadcast/Multicast used by the port.  Completes on
 *   the RCQ of the leading connection.
 *
 * RAMROD_CMD_ID_ETH_CFC_DEL
 *   Used when tearing down a conneciton prior to driver unload.  Completes
 *   on the RCQ of the leading connection (since the current connection
 *   has been completely removed from controller memory).
 *
 * RAMROD_CMD_ID_ETH_PORT_DEL
 *   Used to tear down the leading connection prior to driver unload,
 *   typically fp[0].  Completes as an index increment of the CSTORM on the
 *   default status block.
 *
 * RAMROD_CMD_ID_ETH_FORWARD_SETUP
 *   Used for connection offload.  Completes on the RCQ of the multi-queue
 *   RSS connection that is being offloaded.  (Not currently used under
 *   FreeBSD.)
 *
 * There can only be one command pending per function.
 *
 * Returns:
 *   0 = Success, !0 = Failure.
 */

/* must be called under the spq lock */
static inline struct eth_spe *bnx2x_sp_get_next(struct bnx2x_softc *sc)
{
        struct eth_spe *next_spe = sc->spq_prod_bd;

        if (sc->spq_prod_bd == sc->spq_last_bd) {
                /* wrap back to the first eth_spq */
                sc->spq_prod_bd = sc->spq;
                sc->spq_prod_idx = 0;
        } else {
                sc->spq_prod_bd++;
                sc->spq_prod_idx++;
        }

        return next_spe;
}

/* must be called under the spq lock */
static void bnx2x_sp_prod_update(struct bnx2x_softc *sc)
{
        int func = SC_FUNC(sc);

        /*
         * Make sure that BD data is updated before writing the producer.
         * BD data is written to the memory, the producer is read from the
         * memory, thus we need a full memory barrier to ensure the ordering.
         */
        mb();

        REG_WR16(sc, (BAR_XSTRORM_INTMEM + XSTORM_SPQ_PROD_OFFSET(func)),
                 sc->spq_prod_idx);

        mb();
}

/**
 * bnx2x_is_contextless_ramrod - check if the current command ends on EQ
 *
 * @cmd:      command to check
 * @cmd_type: command type
 */
static int bnx2x_is_contextless_ramrod(int cmd, int cmd_type)
{
        if ((cmd_type == NONE_CONNECTION_TYPE) ||
            (cmd == RAMROD_CMD_ID_ETH_FORWARD_SETUP) ||
            (cmd == RAMROD_CMD_ID_ETH_CLASSIFICATION_RULES) ||
            (cmd == RAMROD_CMD_ID_ETH_FILTER_RULES) ||
            (cmd == RAMROD_CMD_ID_ETH_MULTICAST_RULES) ||
            (cmd == RAMROD_CMD_ID_ETH_SET_MAC) ||
            (cmd == RAMROD_CMD_ID_ETH_RSS_UPDATE)) {
                return TRUE;
        } else {
                return FALSE;
        }
}

/**
 * bnx2x_sp_post - place a single command on an SP ring
 *
 * @sc:         driver handle
 * @command:    command to place (e.g. SETUP, FILTER_RULES, etc.)
 * @cid:        SW CID the command is related to
 * @data_hi:    command private data address (high 32 bits)
 * @data_lo:    command private data address (low 32 bits)
 * @cmd_type:   command type (e.g. NONE, ETH)
 *
 * SP data is handled as if it's always an address pair, thus data fields are
 * not swapped to little endian in upper functions. Instead this function swaps
 * data as if it's two uint32 fields.
 */
int
bnx2x_sp_post(struct bnx2x_softc *sc, int command, int cid, uint32_t data_hi,
            uint32_t data_lo, int cmd_type)
{
        struct eth_spe *spe;
        uint16_t type;
        int common;

        common = bnx2x_is_contextless_ramrod(command, cmd_type);

        if (common) {
                if (!atomic_load_acq_long(&sc->eq_spq_left)) {
                        PMD_DRV_LOG(INFO, "EQ ring is full!");
                        return -1;
                }
        } else {
                if (!atomic_load_acq_long(&sc->cq_spq_left)) {
                        PMD_DRV_LOG(INFO, "SPQ ring is full!");
                        return -1;
                }
        }

        spe = bnx2x_sp_get_next(sc);

        /* CID needs port number to be encoded int it */
        spe->hdr.conn_and_cmd_data =
            htole32((command << SPE_HDR_CMD_ID_SHIFT) | HW_CID(sc, cid));

        type = (cmd_type << SPE_HDR_CONN_TYPE_SHIFT) & SPE_HDR_CONN_TYPE;

        /* TBD: Check if it works for VFs */
        type |= ((SC_FUNC(sc) << SPE_HDR_FUNCTION_ID_SHIFT) &
                 SPE_HDR_FUNCTION_ID);

        spe->hdr.type = htole16(type);

        spe->data.update_data_addr.hi = htole32(data_hi);
        spe->data.update_data_addr.lo = htole32(data_lo);

        /*
         * It's ok if the actual decrement is issued towards the memory
         * somewhere between the lock and unlock. Thus no more explict
         * memory barrier is needed.
         */
        if (common) {
                atomic_subtract_acq_long(&sc->eq_spq_left, 1);
        } else {
                atomic_subtract_acq_long(&sc->cq_spq_left, 1);
        }

        PMD_DRV_LOG(DEBUG,
                    "SPQE[%x] (%x:%x) (cmd, common?) (%d,%d) hw_cid %x"
                    "data (%x:%x) type(0x%x) left (CQ, EQ) (%lx,%lx)",
                    sc->spq_prod_idx,
                    (uint32_t) U64_HI(sc->spq_dma.paddr),
                    (uint32_t) (U64_LO(sc->spq_dma.paddr) +
                                (uint8_t *) sc->spq_prod_bd -
                                (uint8_t *) sc->spq), command, common,
                    HW_CID(sc, cid), data_hi, data_lo, type,
                    atomic_load_acq_long(&sc->cq_spq_left),
                    atomic_load_acq_long(&sc->eq_spq_left));

        bnx2x_sp_prod_update(sc);

        return 0;
}

static void bnx2x_drv_pulse(struct bnx2x_softc *sc)
{
        SHMEM_WR(sc, func_mb[SC_FW_MB_IDX(sc)].drv_pulse_mb,
                 sc->fw_drv_pulse_wr_seq);
}

static int bnx2x_tx_queue_has_work(const struct bnx2x_fastpath *fp)
{
        uint16_t hw_cons;
        struct bnx2x_tx_queue *txq = fp->sc->tx_queues[fp->index];

        if (unlikely(!txq)) {
                PMD_TX_LOG(ERR, "ERROR: TX queue is NULL");
                return 0;
        }

        mb();                   /* status block fields can change */
        hw_cons = le16toh(*fp->tx_cons_sb);
        return hw_cons != txq->tx_pkt_head;
}

static uint8_t bnx2x_has_tx_work(struct bnx2x_fastpath *fp)
{
        /* expand this for multi-cos if ever supported */
        return bnx2x_tx_queue_has_work(fp);
}

static int bnx2x_has_rx_work(struct bnx2x_fastpath *fp)
{
        uint16_t rx_cq_cons_sb;
        struct bnx2x_rx_queue *rxq;
        rxq = fp->sc->rx_queues[fp->index];
        if (unlikely(!rxq)) {
                PMD_RX_LOG(ERR, "ERROR: RX queue is NULL");
                return 0;
        }

        mb();                   /* status block fields can change */
        rx_cq_cons_sb = le16toh(*fp->rx_cq_cons_sb);
        if (unlikely((rx_cq_cons_sb & MAX_RCQ_ENTRIES(rxq)) ==
                     MAX_RCQ_ENTRIES(rxq)))
                rx_cq_cons_sb++;
        return rxq->rx_cq_head != rx_cq_cons_sb;
}

static void
bnx2x_sp_event(struct bnx2x_softc *sc, struct bnx2x_fastpath *fp,
             union eth_rx_cqe *rr_cqe)
{
        int cid = SW_CID(rr_cqe->ramrod_cqe.conn_and_cmd_data);
        int command = CQE_CMD(rr_cqe->ramrod_cqe.conn_and_cmd_data);
        enum ecore_queue_cmd drv_cmd = ECORE_Q_CMD_MAX;
        struct ecore_queue_sp_obj *q_obj = &BNX2X_SP_OBJ(sc, fp).q_obj;

        PMD_DRV_LOG(DEBUG,
                    "fp=%d cid=%d got ramrod #%d state is %x type is %d",
                    fp->index, cid, command, sc->state,
                    rr_cqe->ramrod_cqe.ramrod_type);

        switch (command) {
        case (RAMROD_CMD_ID_ETH_CLIENT_UPDATE):
                PMD_DRV_LOG(DEBUG, "got UPDATE ramrod. CID %d", cid);
                drv_cmd = ECORE_Q_CMD_UPDATE;
                break;

        case (RAMROD_CMD_ID_ETH_CLIENT_SETUP):
                PMD_DRV_LOG(DEBUG, "got MULTI[%d] setup ramrod", cid);
                drv_cmd = ECORE_Q_CMD_SETUP;
                break;

        case (RAMROD_CMD_ID_ETH_TX_QUEUE_SETUP):
                PMD_DRV_LOG(DEBUG, "got MULTI[%d] tx-only setup ramrod", cid);
                drv_cmd = ECORE_Q_CMD_SETUP_TX_ONLY;
                break;

        case (RAMROD_CMD_ID_ETH_HALT):
                PMD_DRV_LOG(DEBUG, "got MULTI[%d] halt ramrod", cid);
                drv_cmd = ECORE_Q_CMD_HALT;
                break;

        case (RAMROD_CMD_ID_ETH_TERMINATE):
                PMD_DRV_LOG(DEBUG, "got MULTI[%d] teminate ramrod", cid);
                drv_cmd = ECORE_Q_CMD_TERMINATE;
                break;

        case (RAMROD_CMD_ID_ETH_EMPTY):
                PMD_DRV_LOG(DEBUG, "got MULTI[%d] empty ramrod", cid);
                drv_cmd = ECORE_Q_CMD_EMPTY;
                break;

        default:
                PMD_DRV_LOG(DEBUG,
                            "ERROR: unexpected MC reply (%d)"
                            "on fp[%d]", command, fp->index);
                return;
        }

        if ((drv_cmd != ECORE_Q_CMD_MAX) &&
            q_obj->complete_cmd(sc, q_obj, drv_cmd)) {
                /*
                 * q_obj->complete_cmd() failure means that this was
                 * an unexpected completion.
                 *
                 * In this case we don't want to increase the sc->spq_left
                 * because apparently we haven't sent this command the first
                 * place.
                 */
                // rte_panic("Unexpected SP completion");
                return;
        }

        atomic_add_acq_long(&sc->cq_spq_left, 1);

        PMD_DRV_LOG(DEBUG, "sc->cq_spq_left 0x%lx",
                    atomic_load_acq_long(&sc->cq_spq_left));
}

static uint8_t bnx2x_rxeof(struct bnx2x_softc *sc, struct bnx2x_fastpath *fp)
{
        struct bnx2x_rx_queue *rxq;
        uint16_t bd_cons, bd_prod, bd_prod_fw, comp_ring_cons;
        uint16_t hw_cq_cons, sw_cq_cons, sw_cq_prod;

        rxq = sc->rx_queues[fp->index];
        if (!rxq) {
                PMD_RX_LOG(ERR, "RX queue %d is NULL", fp->index);
                return 0;
        }

        /* CQ "next element" is of the size of the regular element */
        hw_cq_cons = le16toh(*fp->rx_cq_cons_sb);
        if (unlikely((hw_cq_cons & USABLE_RCQ_ENTRIES_PER_PAGE) ==
                     USABLE_RCQ_ENTRIES_PER_PAGE)) {
                hw_cq_cons++;
        }

        bd_cons = rxq->rx_bd_head;
        bd_prod = rxq->rx_bd_tail;
        bd_prod_fw = bd_prod;
        sw_cq_cons = rxq->rx_cq_head;
        sw_cq_prod = rxq->rx_cq_tail;

        /*
         * Memory barrier necessary as speculative reads of the rx
         * buffer can be ahead of the index in the status block
         */
        rmb();

        while (sw_cq_cons != hw_cq_cons) {
                union eth_rx_cqe *cqe;
                struct eth_fast_path_rx_cqe *cqe_fp;
                uint8_t cqe_fp_flags;
                enum eth_rx_cqe_type cqe_fp_type;

                comp_ring_cons = RCQ_ENTRY(sw_cq_cons, rxq);
                bd_prod = RX_BD(bd_prod, rxq);
                bd_cons = RX_BD(bd_cons, rxq);

                cqe = &rxq->cq_ring[comp_ring_cons];
                cqe_fp = &cqe->fast_path_cqe;
                cqe_fp_flags = cqe_fp->type_error_flags;
                cqe_fp_type = cqe_fp_flags & ETH_FAST_PATH_RX_CQE_TYPE;

                /* is this a slowpath msg? */
                if (CQE_TYPE_SLOW(cqe_fp_type)) {
                        bnx2x_sp_event(sc, fp, cqe);
                        goto next_cqe;
                }

                /* is this an error packet? */
                if (unlikely(cqe_fp_flags &
                             ETH_FAST_PATH_RX_CQE_PHY_DECODE_ERR_FLG)) {
                        PMD_RX_LOG(DEBUG, "flags 0x%x rx packet %u",
                                   cqe_fp_flags, sw_cq_cons);
                        goto next_rx;
                }

                PMD_RX_LOG(DEBUG, "Dropping fastpath called from attn poller!");

next_rx:
                bd_cons = NEXT_RX_BD(bd_cons);
                bd_prod = NEXT_RX_BD(bd_prod);
                bd_prod_fw = NEXT_RX_BD(bd_prod_fw);

next_cqe:
                sw_cq_prod = NEXT_RCQ_IDX(sw_cq_prod);
                sw_cq_cons = NEXT_RCQ_IDX(sw_cq_cons);

        }                       /* while work to do */

        rxq->rx_bd_head = bd_cons;
        rxq->rx_bd_tail = bd_prod_fw;
        rxq->rx_cq_head = sw_cq_cons;
        rxq->rx_cq_tail = sw_cq_prod;

        /* Update producers */
        bnx2x_update_rx_prod(sc, fp, bd_prod_fw, sw_cq_prod);

        return sw_cq_cons != hw_cq_cons;
}

static uint16_t
bnx2x_free_tx_pkt(__rte_unused struct bnx2x_fastpath *fp, struct bnx2x_tx_queue *txq,
                uint16_t pkt_idx, uint16_t bd_idx)
{
        struct eth_tx_start_bd *tx_start_bd =
            &txq->tx_ring[TX_BD(bd_idx, txq)].start_bd;
        uint16_t nbd = rte_le_to_cpu_16(tx_start_bd->nbd);
        struct rte_mbuf *tx_mbuf = txq->sw_ring[TX_BD(pkt_idx, txq)];

        if (likely(tx_mbuf != NULL)) {
                rte_pktmbuf_free_seg(tx_mbuf);
        } else {
                PMD_RX_LOG(ERR, "fp[%02d] lost mbuf %lu",
                           fp->index, (unsigned long)TX_BD(pkt_idx, txq));
        }

        txq->sw_ring[TX_BD(pkt_idx, txq)] = NULL;
        txq->nb_tx_avail += nbd;

        while (nbd--)
                bd_idx = NEXT_TX_BD(bd_idx);

        return bd_idx;
}

/* processes transmit completions */
uint8_t bnx2x_txeof(__rte_unused struct bnx2x_softc * sc, struct bnx2x_fastpath * fp)
{
        uint16_t bd_cons, hw_cons, sw_cons;
        __rte_unused uint16_t tx_bd_avail;

        struct bnx2x_tx_queue *txq = fp->sc->tx_queues[fp->index];

        if (unlikely(!txq)) {
                PMD_TX_LOG(ERR, "ERROR: TX queue is NULL");
                return 0;
        }

        bd_cons = txq->tx_bd_head;
        hw_cons = rte_le_to_cpu_16(*fp->tx_cons_sb);
        sw_cons = txq->tx_pkt_head;

        while (sw_cons != hw_cons) {
                bd_cons = bnx2x_free_tx_pkt(fp, txq, sw_cons, bd_cons);
                sw_cons++;
        }

        txq->tx_pkt_head = sw_cons;
        txq->tx_bd_head = bd_cons;

        tx_bd_avail = txq->nb_tx_avail;

        PMD_TX_LOG(DEBUG, "fp[%02d] avail=%u cons_sb=%u, "
                   "pkt_head=%u pkt_tail=%u bd_head=%u bd_tail=%u",
                   fp->index, tx_bd_avail, hw_cons,
                   txq->tx_pkt_head, txq->tx_pkt_tail,
                   txq->tx_bd_head, txq->tx_bd_tail);
        return TRUE;
}

static void bnx2x_drain_tx_queues(struct bnx2x_softc *sc)
{
        struct bnx2x_fastpath *fp;
        int i, count;

        /* wait until all TX fastpath tasks have completed */
        for (i = 0; i < sc->num_queues; i++) {
                fp = &sc->fp[i];

                count = 1000;

                while (bnx2x_has_tx_work(fp)) {
                        bnx2x_txeof(sc, fp);

                        if (count == 0) {
                                PMD_TX_LOG(ERR,
                                           "Timeout waiting for fp[%d] "
                                           "transmits to complete!", i);
                                rte_panic("tx drain failure");
                                return;
                        }

                        count--;
                        DELAY(1000);
                        rmb();
                }
        }

        return;
}

static int
bnx2x_del_all_macs(struct bnx2x_softc *sc, struct ecore_vlan_mac_obj *mac_obj,
                 int mac_type, uint8_t wait_for_comp)
{
        unsigned long ramrod_flags = 0, vlan_mac_flags = 0;
        int rc;

        /* wait for completion of requested */
        if (wait_for_comp) {
                bnx2x_set_bit(RAMROD_COMP_WAIT, &ramrod_flags);
        }

        /* Set the mac type of addresses we want to clear */
        bnx2x_set_bit(mac_type, &vlan_mac_flags);

        rc = mac_obj->delete_all(sc, mac_obj, &vlan_mac_flags, &ramrod_flags);
        if (rc < 0)
                PMD_DRV_LOG(ERR, "Failed to delete MACs (%d)", rc);

        return rc;
}

static int
bnx2x_fill_accept_flags(struct bnx2x_softc *sc, uint32_t rx_mode,
                        unsigned long *rx_accept_flags,
                        unsigned long *tx_accept_flags)
{
        /* Clear the flags first */
        *rx_accept_flags = 0;
        *tx_accept_flags = 0;

        switch (rx_mode) {
        case BNX2X_RX_MODE_NONE:
                /*
                 * 'drop all' supersedes any accept flags that may have been
                 * passed to the function.
                 */
                break;

        case BNX2X_RX_MODE_NORMAL:
                bnx2x_set_bit(ECORE_ACCEPT_UNICAST, rx_accept_flags);
                bnx2x_set_bit(ECORE_ACCEPT_MULTICAST, rx_accept_flags);
                bnx2x_set_bit(ECORE_ACCEPT_BROADCAST, rx_accept_flags);

                /* internal switching mode */
                bnx2x_set_bit(ECORE_ACCEPT_UNICAST, tx_accept_flags);
                bnx2x_set_bit(ECORE_ACCEPT_MULTICAST, tx_accept_flags);
                bnx2x_set_bit(ECORE_ACCEPT_BROADCAST, tx_accept_flags);

                break;

        case BNX2X_RX_MODE_ALLMULTI:
                bnx2x_set_bit(ECORE_ACCEPT_UNICAST, rx_accept_flags);
                bnx2x_set_bit(ECORE_ACCEPT_ALL_MULTICAST, rx_accept_flags);
                bnx2x_set_bit(ECORE_ACCEPT_BROADCAST, rx_accept_flags);

                /* internal switching mode */
                bnx2x_set_bit(ECORE_ACCEPT_UNICAST, tx_accept_flags);
                bnx2x_set_bit(ECORE_ACCEPT_ALL_MULTICAST, tx_accept_flags);
                bnx2x_set_bit(ECORE_ACCEPT_BROADCAST, tx_accept_flags);

                break;

        case BNX2X_RX_MODE_ALLMULTI_PROMISC:
        case BNX2X_RX_MODE_PROMISC:
                /*
                 * According to deffinition of SI mode, iface in promisc mode
                 * should receive matched and unmatched (in resolution of port)
                 * unicast packets.
                 */
                bnx2x_set_bit(ECORE_ACCEPT_UNMATCHED, rx_accept_flags);
                bnx2x_set_bit(ECORE_ACCEPT_UNICAST, rx_accept_flags);
                bnx2x_set_bit(ECORE_ACCEPT_ALL_MULTICAST, rx_accept_flags);
                bnx2x_set_bit(ECORE_ACCEPT_BROADCAST, rx_accept_flags);

                /* internal switching mode */
                bnx2x_set_bit(ECORE_ACCEPT_ALL_MULTICAST, tx_accept_flags);
                bnx2x_set_bit(ECORE_ACCEPT_BROADCAST, tx_accept_flags);

                if (IS_MF_SI(sc)) {
                        bnx2x_set_bit(ECORE_ACCEPT_ALL_UNICAST, tx_accept_flags);
                } else {
                        bnx2x_set_bit(ECORE_ACCEPT_UNICAST, tx_accept_flags);
                }

                break;

        default:
                PMD_RX_LOG(ERR, "Unknown rx_mode (%d)", rx_mode);
                return -1;
        }

        /* Set ACCEPT_ANY_VLAN as we do not enable filtering by VLAN */
        if (rx_mode != BNX2X_RX_MODE_NONE) {
                bnx2x_set_bit(ECORE_ACCEPT_ANY_VLAN, rx_accept_flags);
                bnx2x_set_bit(ECORE_ACCEPT_ANY_VLAN, tx_accept_flags);
        }

        return 0;
}

static int
bnx2x_set_q_rx_mode(struct bnx2x_softc *sc, uint8_t cl_id,
                  unsigned long rx_mode_flags,
                  unsigned long rx_accept_flags,
                  unsigned long tx_accept_flags, unsigned long ramrod_flags)
{
        struct ecore_rx_mode_ramrod_params ramrod_param;
        int rc;

        memset(&ramrod_param, 0, sizeof(ramrod_param));

        /* Prepare ramrod parameters */
        ramrod_param.cid = 0;
        ramrod_param.cl_id = cl_id;
        ramrod_param.rx_mode_obj = &sc->rx_mode_obj;
        ramrod_param.func_id = SC_FUNC(sc);

        ramrod_param.pstate = &sc->sp_state;
        ramrod_param.state = ECORE_FILTER_RX_MODE_PENDING;

        ramrod_param.rdata = BNX2X_SP(sc, rx_mode_rdata);
        ramrod_param.rdata_mapping =
            (rte_iova_t)BNX2X_SP_MAPPING(sc, rx_mode_rdata),
            bnx2x_set_bit(ECORE_FILTER_RX_MODE_PENDING, &sc->sp_state);

        ramrod_param.ramrod_flags = ramrod_flags;
        ramrod_param.rx_mode_flags = rx_mode_flags;

        ramrod_param.rx_accept_flags = rx_accept_flags;
        ramrod_param.tx_accept_flags = tx_accept_flags;

        rc = ecore_config_rx_mode(sc, &ramrod_param);
        if (rc < 0) {
                PMD_RX_LOG(ERR, "Set rx_mode %d failed", sc->rx_mode);
                return rc;
        }

        return 0;
}

int bnx2x_set_storm_rx_mode(struct bnx2x_softc *sc)
{
        unsigned long rx_mode_flags = 0, ramrod_flags = 0;
        unsigned long rx_accept_flags = 0, tx_accept_flags = 0;
        int rc;

        rc = bnx2x_fill_accept_flags(sc, sc->rx_mode, &rx_accept_flags,
                                   &tx_accept_flags);
        if (rc) {
                return rc;
        }

        bnx2x_set_bit(RAMROD_RX, &ramrod_flags);
        bnx2x_set_bit(RAMROD_TX, &ramrod_flags);
        bnx2x_set_bit(RAMROD_COMP_WAIT, &ramrod_flags);

        return bnx2x_set_q_rx_mode(sc, sc->fp[0].cl_id, rx_mode_flags,
                                 rx_accept_flags, tx_accept_flags,
                                 ramrod_flags);
}

/* returns the "mcp load_code" according to global load_count array */
static int bnx2x_nic_load_no_mcp(struct bnx2x_softc *sc)
{
        int path = SC_PATH(sc);
        int port = SC_PORT(sc);

        PMD_DRV_LOG(INFO, "NO MCP - load counts[%d]      %d, %d, %d",
                    path, load_count[path][0], load_count[path][1],
                    load_count[path][2]);

        load_count[path][0]++;
        load_count[path][1 + port]++;
        PMD_DRV_LOG(INFO, "NO MCP - new load counts[%d]  %d, %d, %d",
                    path, load_count[path][0], load_count[path][1],
                    load_count[path][2]);
        if (load_count[path][0] == 1)
                return FW_MSG_CODE_DRV_LOAD_COMMON;
        else if (load_count[path][1 + port] == 1)
                return FW_MSG_CODE_DRV_LOAD_PORT;
        else
                return FW_MSG_CODE_DRV_LOAD_FUNCTION;
}

/* returns the "mcp load_code" according to global load_count array */
static int bnx2x_nic_unload_no_mcp(struct bnx2x_softc *sc)
{
        int port = SC_PORT(sc);
        int path = SC_PATH(sc);

        PMD_DRV_LOG(INFO, "NO MCP - load counts[%d]      %d, %d, %d",
                    path, load_count[path][0], load_count[path][1],
                    load_count[path][2]);
        load_count[path][0]--;
        load_count[path][1 + port]--;
        PMD_DRV_LOG(INFO, "NO MCP - new load counts[%d]  %d, %d, %d",
                    path, load_count[path][0], load_count[path][1],
                    load_count[path][2]);
        if (load_count[path][0] == 0) {
                return FW_MSG_CODE_DRV_UNLOAD_COMMON;
        } else if (load_count[path][1 + port] == 0) {
                return FW_MSG_CODE_DRV_UNLOAD_PORT;
        } else {
                return FW_MSG_CODE_DRV_UNLOAD_FUNCTION;
        }
}

/* request unload mode from the MCP: COMMON, PORT or FUNCTION */
static uint32_t bnx2x_send_unload_req(struct bnx2x_softc *sc, int unload_mode)
{
        uint32_t reset_code = 0;

        /* Select the UNLOAD request mode */
        if (unload_mode == UNLOAD_NORMAL) {
                reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS;
        } else {
                reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS;
        }

        /* Send the request to the MCP */
        if (!BNX2X_NOMCP(sc)) {
                reset_code = bnx2x_fw_command(sc, reset_code, 0);
        } else {
                reset_code = bnx2x_nic_unload_no_mcp(sc);
        }

        return reset_code;
}

/* send UNLOAD_DONE command to the MCP */
static void bnx2x_send_unload_done(struct bnx2x_softc *sc, uint8_t keep_link)
{
        uint32_t reset_param =
            keep_link ? DRV_MSG_CODE_UNLOAD_SKIP_LINK_RESET : 0;

        /* Report UNLOAD_DONE to MCP */
        if (!BNX2X_NOMCP(sc)) {
                bnx2x_fw_command(sc, DRV_MSG_CODE_UNLOAD_DONE, reset_param);
        }
}

static int bnx2x_func_wait_started(struct bnx2x_softc *sc)
{
        int tout = 50;

        if (!sc->port.pmf) {
                return 0;
        }

        /*
         * (assumption: No Attention from MCP at this stage)
         * PMF probably in the middle of TX disable/enable transaction
         * 1. Sync IRS for default SB
         * 2. Sync SP queue - this guarantees us that attention handling started
         * 3. Wait, that TX disable/enable transaction completes
         *
         * 1+2 guarantee that if DCBX attention was scheduled it already changed
         * pending bit of transaction from STARTED-->TX_STOPPED, if we already
         * received completion for the transaction the state is TX_STOPPED.
         * State will return to STARTED after completion of TX_STOPPED-->STARTED
         * transaction.
         */

        while (ecore_func_get_state(sc, &sc->func_obj) !=
               ECORE_F_STATE_STARTED && tout--) {
                DELAY(20000);
        }

        if (ecore_func_get_state(sc, &sc->func_obj) != ECORE_F_STATE_STARTED) {
                /*
                 * Failed to complete the transaction in a "good way"
                 * Force both transactions with CLR bit.
                 */
                struct ecore_func_state_params func_params = { NULL };

                PMD_DRV_LOG(NOTICE, "Unexpected function state! "
                            "Forcing STARTED-->TX_STOPPED-->STARTED");

                func_params.f_obj = &sc->func_obj;
                bnx2x_set_bit(RAMROD_DRV_CLR_ONLY, &func_params.ramrod_flags);

                /* STARTED-->TX_STOPPED */
                func_params.cmd = ECORE_F_CMD_TX_STOP;
                ecore_func_state_change(sc, &func_params);

                /* TX_STOPPED-->STARTED */
                func_params.cmd = ECORE_F_CMD_TX_START;
                return ecore_func_state_change(sc, &func_params);
        }

        return 0;
}

static int bnx2x_stop_queue(struct bnx2x_softc *sc, int index)
{
        struct bnx2x_fastpath *fp = &sc->fp[index];
        struct ecore_queue_state_params q_params = { NULL };
        int rc;

        PMD_DRV_LOG(DEBUG, "stopping queue %d cid %d", index, fp->index);

        q_params.q_obj = &sc->sp_objs[fp->index].q_obj;
        /* We want to wait for completion in this context */
        bnx2x_set_bit(RAMROD_COMP_WAIT, &q_params.ramrod_flags);

        /* Stop the primary connection: */

        /* ...halt the connection */
        q_params.cmd = ECORE_Q_CMD_HALT;
        rc = ecore_queue_state_change(sc, &q_params);
        if (rc) {
                return rc;
        }

        /* ...terminate the connection */
        q_params.cmd = ECORE_Q_CMD_TERMINATE;
        memset(&q_params.params.terminate, 0,
               sizeof(q_params.params.terminate));
        q_params.params.terminate.cid_index = FIRST_TX_COS_INDEX;
        rc = ecore_queue_state_change(sc, &q_params);
        if (rc) {
                return rc;
        }

        /* ...delete cfc entry */
        q_params.cmd = ECORE_Q_CMD_CFC_DEL;
        memset(&q_params.params.cfc_del, 0, sizeof(q_params.params.cfc_del));
        q_params.params.cfc_del.cid_index = FIRST_TX_COS_INDEX;
        return ecore_queue_state_change(sc, &q_params);
}

/* wait for the outstanding SP commands */
static uint8_t bnx2x_wait_sp_comp(struct bnx2x_softc *sc, unsigned long mask)
{
        unsigned long tmp;
        int tout = 5000;        /* wait for 5 secs tops */

        while (tout--) {
                mb();
                if (!(atomic_load_acq_long(&sc->sp_state) & mask)) {
                        return TRUE;
                }

                DELAY(1000);
        }

        mb();

        tmp = atomic_load_acq_long(&sc->sp_state);
        if (tmp & mask) {
                PMD_DRV_LOG(INFO, "Filtering completion timed out: "
                            "sp_state 0x%lx, mask 0x%lx", tmp, mask);
                return FALSE;
        }

        return FALSE;
}

static int bnx2x_func_stop(struct bnx2x_softc *sc)
{
        struct ecore_func_state_params func_params = { NULL };
        int rc;

        /* prepare parameters for function state transitions */
        bnx2x_set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags);
        func_params.f_obj = &sc->func_obj;
        func_params.cmd = ECORE_F_CMD_STOP;

        /*
         * Try to stop the function the 'good way'. If it fails (in case
         * of a parity error during bnx2x_chip_cleanup()) and we are
         * not in a debug mode, perform a state transaction in order to
         * enable further HW_RESET transaction.
         */
        rc = ecore_func_state_change(sc, &func_params);
        if (rc) {
                PMD_DRV_LOG(NOTICE, "FUNC_STOP ramrod failed. "
                            "Running a dry transaction");
                bnx2x_set_bit(RAMROD_DRV_CLR_ONLY, &func_params.ramrod_flags);
                return ecore_func_state_change(sc, &func_params);
        }

        return 0;
}

static int bnx2x_reset_hw(struct bnx2x_softc *sc, uint32_t load_code)
{
        struct ecore_func_state_params func_params = { NULL };

        /* Prepare parameters for function state transitions */
        bnx2x_set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags);

        func_params.f_obj = &sc->func_obj;
        func_params.cmd = ECORE_F_CMD_HW_RESET;

        func_params.params.hw_init.load_phase = load_code;

        return ecore_func_state_change(sc, &func_params);
}

static void bnx2x_int_disable_sync(struct bnx2x_softc *sc, int disable_hw)
{
        if (disable_hw) {
                /* prevent the HW from sending interrupts */
                bnx2x_int_disable(sc);
        }
}

static void
bnx2x_chip_cleanup(struct bnx2x_softc *sc, uint32_t unload_mode, uint8_t keep_link)
{
        int port = SC_PORT(sc);
        struct ecore_mcast_ramrod_params rparam = { NULL };
        uint32_t reset_code;
        int i, rc = 0;

        bnx2x_drain_tx_queues(sc);

        /* give HW time to discard old tx messages */
        DELAY(1000);

        /* Clean all ETH MACs */
        rc = bnx2x_del_all_macs(sc, &sc->sp_objs[0].mac_obj, ECORE_ETH_MAC,
                              FALSE);
        if (rc < 0) {
                PMD_DRV_LOG(NOTICE, "Failed to delete all ETH MACs (%d)", rc);
        }

        /* Clean up UC list  */
        rc = bnx2x_del_all_macs(sc, &sc->sp_objs[0].mac_obj, ECORE_UC_LIST_MAC,
                              TRUE);
        if (rc < 0) {
                PMD_DRV_LOG(NOTICE, "Failed to delete UC MACs list (%d)", rc);
        }

        /* Disable LLH */
        REG_WR(sc, NIG_REG_LLH0_FUNC_EN + port * 8, 0);

        /* Set "drop all" to stop Rx */

        /*
         * We need to take the if_maddr_lock() here in order to prevent
         * a race between the completion code and this code.
         */

        if (bnx2x_test_bit(ECORE_FILTER_RX_MODE_PENDING, &sc->sp_state)) {
                bnx2x_set_bit(ECORE_FILTER_RX_MODE_SCHED, &sc->sp_state);
        } else {
                bnx2x_set_storm_rx_mode(sc);
        }

        /* Clean up multicast configuration */
        rparam.mcast_obj = &sc->mcast_obj;
        rc = ecore_config_mcast(sc, &rparam, ECORE_MCAST_CMD_DEL);
        if (rc < 0) {
                PMD_DRV_LOG(NOTICE,
                            "Failed to send DEL MCAST command (%d)", rc);
        }

        /*
         * Send the UNLOAD_REQUEST to the MCP. This will return if
         * this function should perform FUNCTION, PORT, or COMMON HW
         * reset.
         */
        reset_code = bnx2x_send_unload_req(sc, unload_mode);

        /*
         * (assumption: No Attention from MCP at this stage)
         * PMF probably in the middle of TX disable/enable transaction
         */
        rc = bnx2x_func_wait_started(sc);
        if (rc) {
                PMD_DRV_LOG(NOTICE, "bnx2x_func_wait_started failed");
        }

        /*
         * Close multi and leading connections
         * Completions for ramrods are collected in a synchronous way
         */
        for (i = 0; i < sc->num_queues; i++) {
                if (bnx2x_stop_queue(sc, i)) {
                        goto unload_error;
                }
        }

        /*
         * If SP settings didn't get completed so far - something
         * very wrong has happen.
         */
        if (!bnx2x_wait_sp_comp(sc, ~0x0UL)) {
                PMD_DRV_LOG(NOTICE, "Common slow path ramrods got stuck!");
        }

unload_error:

        rc = bnx2x_func_stop(sc);
        if (rc) {
                PMD_DRV_LOG(NOTICE, "Function stop failed!");
        }

        /* disable HW interrupts */
        bnx2x_int_disable_sync(sc, TRUE);

        /* Reset the chip */
        rc = bnx2x_reset_hw(sc, reset_code);
        if (rc) {
                PMD_DRV_LOG(NOTICE, "Hardware reset failed");
        }

        /* Report UNLOAD_DONE to MCP */
        bnx2x_send_unload_done(sc, keep_link);
}

static void bnx2x_disable_close_the_gate(struct bnx2x_softc *sc)
{
        uint32_t val;

        PMD_DRV_LOG(DEBUG, "Disabling 'close the gates'");

        val = REG_RD(sc, MISC_REG_AEU_GENERAL_MASK);
        val &= ~(MISC_AEU_GENERAL_MASK_REG_AEU_PXP_CLOSE_MASK |
                 MISC_AEU_GENERAL_MASK_REG_AEU_NIG_CLOSE_MASK);
        REG_WR(sc, MISC_REG_AEU_GENERAL_MASK, val);
}

/*
 * Cleans the object that have internal lists without sending
 * ramrods. Should be run when interrutps are disabled.
 */
static void bnx2x_squeeze_objects(struct bnx2x_softc *sc)
{
        unsigned long ramrod_flags = 0, vlan_mac_flags = 0;
        struct ecore_mcast_ramrod_params rparam = { NULL };
        struct ecore_vlan_mac_obj *mac_obj = &sc->sp_objs->mac_obj;
        int rc;

        /* Cleanup MACs' object first... */

        /* Wait for completion of requested */
        bnx2x_set_bit(RAMROD_COMP_WAIT, &ramrod_flags);
        /* Perform a dry cleanup */
        bnx2x_set_bit(RAMROD_DRV_CLR_ONLY, &ramrod_flags);

        /* Clean ETH primary MAC */
        bnx2x_set_bit(ECORE_ETH_MAC, &vlan_mac_flags);
        rc = mac_obj->delete_all(sc, &sc->sp_objs->mac_obj, &vlan_mac_flags,
                                 &ramrod_flags);
        if (rc != 0) {
                PMD_DRV_LOG(NOTICE, "Failed to clean ETH MACs (%d)", rc);
        }

        /* Cleanup UC list */
        vlan_mac_flags = 0;
        bnx2x_set_bit(ECORE_UC_LIST_MAC, &vlan_mac_flags);
        rc = mac_obj->delete_all(sc, mac_obj, &vlan_mac_flags, &ramrod_flags);
        if (rc != 0) {
                PMD_DRV_LOG(NOTICE, "Failed to clean UC list MACs (%d)", rc);
        }

        /* Now clean mcast object... */

        rparam.mcast_obj = &sc->mcast_obj;
        bnx2x_set_bit(RAMROD_DRV_CLR_ONLY, &rparam.ramrod_flags);

        /* Add a DEL command... */
        rc = ecore_config_mcast(sc, &rparam, ECORE_MCAST_CMD_DEL);
        if (rc < 0) {
                PMD_DRV_LOG(NOTICE,
                            "Failed to send DEL MCAST command (%d)", rc);
        }

        /* now wait until all pending commands are cleared */

        rc = ecore_config_mcast(sc, &rparam, ECORE_MCAST_CMD_CONT);
        while (rc != 0) {
                if (rc < 0) {
                        PMD_DRV_LOG(NOTICE,
                                    "Failed to clean MCAST object (%d)", rc);
                        return;
                }

                rc = ecore_config_mcast(sc, &rparam, ECORE_MCAST_CMD_CONT);
        }
}

/* stop the controller */
__rte_noinline
int
bnx2x_nic_unload(struct bnx2x_softc *sc, uint32_t unload_mode, uint8_t keep_link)
{
        uint8_t global = FALSE;
        uint32_t val;

        PMD_DRV_LOG(DEBUG, "Starting NIC unload...");

        /* mark driver as unloaded in shmem2 */
        if (IS_PF(sc) && SHMEM2_HAS(sc, drv_capabilities_flag)) {
                val = SHMEM2_RD(sc, drv_capabilities_flag[SC_FW_MB_IDX(sc)]);
                SHMEM2_WR(sc, drv_capabilities_flag[SC_FW_MB_IDX(sc)],
                          val & ~DRV_FLAGS_CAPABILITIES_LOADED_L2);
        }

        if (IS_PF(sc) && sc->recovery_state != BNX2X_RECOVERY_DONE &&
            (sc->state == BNX2X_STATE_CLOSED || sc->state == BNX2X_STATE_ERROR)) {
                /*
                 * We can get here if the driver has been unloaded
                 * during parity error recovery and is either waiting for a
                 * leader to complete or for other functions to unload and
                 * then ifconfig down has been issued. In this case we want to
                 * unload and let other functions to complete a recovery
                 * process.
                 */
                sc->recovery_state = BNX2X_RECOVERY_DONE;
                sc->is_leader = 0;
                bnx2x_release_leader_lock(sc);
                mb();

                PMD_DRV_LOG(NOTICE, "Can't unload in closed or error state");
                return -1;
        }

        /*
         * Nothing to do during unload if previous bnx2x_nic_load()
         * did not completed successfully - all resourses are released.
         */
        if ((sc->state == BNX2X_STATE_CLOSED) || (sc->state == BNX2X_STATE_ERROR)) {
                return 0;
        }

        sc->state = BNX2X_STATE_CLOSING_WAITING_HALT;
        mb();

        sc->rx_mode = BNX2X_RX_MODE_NONE;
        bnx2x_set_rx_mode(sc);
        mb();

        if (IS_PF(sc)) {
                /* set ALWAYS_ALIVE bit in shmem */
                sc->fw_drv_pulse_wr_seq |= DRV_PULSE_ALWAYS_ALIVE;

                bnx2x_drv_pulse(sc);

                bnx2x_stats_handle(sc, STATS_EVENT_STOP);
                bnx2x_save_statistics(sc);
        }

        /* wait till consumers catch up with producers in all queues */
        bnx2x_drain_tx_queues(sc);

        /* if VF indicate to PF this function is going down (PF will delete sp
         * elements and clear initializations
         */
        if (IS_VF(sc)) {
                bnx2x_vf_unload(sc);
        } else if (unload_mode != UNLOAD_RECOVERY) {
                /* if this is a normal/close unload need to clean up chip */
                bnx2x_chip_cleanup(sc, unload_mode, keep_link);
        } else {
                /* Send the UNLOAD_REQUEST to the MCP */
                bnx2x_send_unload_req(sc, unload_mode);

                /*
                 * Prevent transactions to host from the functions on the
                 * engine that doesn't reset global blocks in case of global
                 * attention once gloabl blocks are reset and gates are opened
                 * (the engine which leader will perform the recovery
                 * last).
                 */
                if (!CHIP_IS_E1x(sc)) {
                        bnx2x_pf_disable(sc);
                }

                /* disable HW interrupts */
                bnx2x_int_disable_sync(sc, TRUE);

                /* Report UNLOAD_DONE to MCP */
                bnx2x_send_unload_done(sc, FALSE);
        }

        /*
         * At this stage no more interrupts will arrive so we may safely clean
         * the queue'able objects here in case they failed to get cleaned so far.
         */
        if (IS_PF(sc)) {
                bnx2x_squeeze_objects(sc);
        }

        /* There should be no more pending SP commands at this stage */
        sc->sp_state = 0;

        sc->port.pmf = 0;

        if (IS_PF(sc)) {
                bnx2x_free_mem(sc);
        }

        bnx2x_free_fw_stats_mem(sc);

        sc->state = BNX2X_STATE_CLOSED;

        /*
         * Check if there are pending parity attentions. If there are - set
         * RECOVERY_IN_PROGRESS.
         */
        if (IS_PF(sc) && bnx2x_chk_parity_attn(sc, &global, FALSE)) {
                bnx2x_set_reset_in_progress(sc);

                /* Set RESET_IS_GLOBAL if needed */
                if (global) {
                        bnx2x_set_reset_global(sc);
                }
        }

        /*
         * The last driver must disable a "close the gate" if there is no
         * parity attention or "process kill" pending.
         */
        if (IS_PF(sc) && !bnx2x_clear_pf_load(sc) &&
            bnx2x_reset_is_done(sc, SC_PATH(sc))) {
                bnx2x_disable_close_the_gate(sc);
        }

        PMD_DRV_LOG(DEBUG, "Ended NIC unload");

        return 0;
}

/*
 * Encapsulte an mbuf cluster into the tx bd chain and makes the memory
 * visible to the controller.
 *
 * If an mbuf is submitted to this routine and cannot be given to the
 * controller (e.g. it has too many fragments) then the function may free
 * the mbuf and return to the caller.
 *
 * Returns:
 *     int: Number of TX BDs used for the mbuf
 *
 *   Note the side effect that an mbuf may be freed if it causes a problem.
 */
int bnx2x_tx_encap(struct bnx2x_tx_queue *txq, struct rte_mbuf *m0)
{
        struct eth_tx_start_bd *tx_start_bd;
        uint16_t bd_prod, pkt_prod;
        struct bnx2x_softc *sc;
        uint32_t nbds = 0;

        sc = txq->sc;
        bd_prod = txq->tx_bd_tail;
        pkt_prod = txq->tx_pkt_tail;

        txq->sw_ring[TX_BD(pkt_prod, txq)] = m0;

        tx_start_bd = &txq->tx_ring[TX_BD(bd_prod, txq)].start_bd;

        tx_start_bd->addr =
            rte_cpu_to_le_64(rte_mbuf_data_iova(m0));
        tx_start_bd->nbytes = rte_cpu_to_le_16(m0->data_len);
        tx_start_bd->bd_flags.as_bitfield = ETH_TX_BD_FLAGS_START_BD;
        tx_start_bd->general_data =
            (1 << ETH_TX_START_BD_HDR_NBDS_SHIFT);

        tx_start_bd->nbd = rte_cpu_to_le_16(2);

        if (m0->ol_flags & PKT_TX_VLAN_PKT) {
                tx_start_bd->vlan_or_ethertype =
                    rte_cpu_to_le_16(m0->vlan_tci);
                tx_start_bd->bd_flags.as_bitfield |=
                    (X_ETH_OUTBAND_VLAN <<
                     ETH_TX_BD_FLAGS_VLAN_MODE_SHIFT);
        } else {
                if (IS_PF(sc))
                        tx_start_bd->vlan_or_ethertype =
                            rte_cpu_to_le_16(pkt_prod);
                else {
                        struct ether_hdr *eh =
                            rte_pktmbuf_mtod(m0, struct ether_hdr *);

                        tx_start_bd->vlan_or_ethertype =
                            rte_cpu_to_le_16(rte_be_to_cpu_16(eh->ether_type));
                }
        }

        bd_prod = NEXT_TX_BD(bd_prod);
        if (IS_VF(sc)) {
                struct eth_tx_parse_bd_e2 *tx_parse_bd;
                const struct ether_hdr *eh =
                    rte_pktmbuf_mtod(m0, struct ether_hdr *);
                uint8_t mac_type = UNICAST_ADDRESS;

                tx_parse_bd =
                    &txq->tx_ring[TX_BD(bd_prod, txq)].parse_bd_e2;
                if (is_multicast_ether_addr(&eh->d_addr)) {
                        if (is_broadcast_ether_addr(&eh->d_addr))
                                mac_type = BROADCAST_ADDRESS;
                        else
                                mac_type = MULTICAST_ADDRESS;
                }
                tx_parse_bd->parsing_data =
                    (mac_type << ETH_TX_PARSE_BD_E2_ETH_ADDR_TYPE_SHIFT);

                rte_memcpy(&tx_parse_bd->data.mac_addr.dst_hi,
                           &eh->d_addr.addr_bytes[0], 2);
                rte_memcpy(&tx_parse_bd->data.mac_addr.dst_mid,
                           &eh->d_addr.addr_bytes[2], 2);
                rte_memcpy(&tx_parse_bd->data.mac_addr.dst_lo,
                           &eh->d_addr.addr_bytes[4], 2);
                rte_memcpy(&tx_parse_bd->data.mac_addr.src_hi,
                           &eh->s_addr.addr_bytes[0], 2);
                rte_memcpy(&tx_parse_bd->data.mac_addr.src_mid,
                           &eh->s_addr.addr_bytes[2], 2);
                rte_memcpy(&tx_parse_bd->data.mac_addr.src_lo,
                           &eh->s_addr.addr_bytes[4], 2);

                tx_parse_bd->data.mac_addr.dst_hi =
                    rte_cpu_to_be_16(tx_parse_bd->data.mac_addr.dst_hi);
                tx_parse_bd->data.mac_addr.dst_mid =
                    rte_cpu_to_be_16(tx_parse_bd->data.
                                     mac_addr.dst_mid);
                tx_parse_bd->data.mac_addr.dst_lo =
                    rte_cpu_to_be_16(tx_parse_bd->data.mac_addr.dst_lo);
                tx_parse_bd->data.mac_addr.src_hi =
                    rte_cpu_to_be_16(tx_parse_bd->data.mac_addr.src_hi);
                tx_parse_bd->data.mac_addr.src_mid =
                    rte_cpu_to_be_16(tx_parse_bd->data.
                                     mac_addr.src_mid);
                tx_parse_bd->data.mac_addr.src_lo =
                    rte_cpu_to_be_16(tx_parse_bd->data.mac_addr.src_lo);

                PMD_TX_LOG(DEBUG,
                           "PBD dst %x %x %x src %x %x %x p_data %x",
                           tx_parse_bd->data.mac_addr.dst_hi,
                           tx_parse_bd->data.mac_addr.dst_mid,
                           tx_parse_bd->data.mac_addr.dst_lo,
                           tx_parse_bd->data.mac_addr.src_hi,
                           tx_parse_bd->data.mac_addr.src_mid,
                           tx_parse_bd->data.mac_addr.src_lo,
                           tx_parse_bd->parsing_data);
        }

        PMD_TX_LOG(DEBUG,
                   "start bd: nbytes %d flags %x vlan %x",
                   tx_start_bd->nbytes,
                   tx_start_bd->bd_flags.as_bitfield,
                   tx_start_bd->vlan_or_ethertype);

        bd_prod = NEXT_TX_BD(bd_prod);
        pkt_prod++;

        if (TX_IDX(bd_prod) < 2)
                nbds++;

        txq->nb_tx_avail -= 2;
        txq->tx_bd_tail = bd_prod;
        txq->tx_pkt_tail = pkt_prod;

        return nbds + 2;
}

static uint16_t bnx2x_cid_ilt_lines(struct bnx2x_softc *sc)
{
        return L2_ILT_LINES(sc);
}

static void bnx2x_ilt_set_info(struct bnx2x_softc *sc)
{
        struct ilt_client_info *ilt_client;
        struct ecore_ilt *ilt = sc->ilt;
        uint16_t line = 0;

        PMD_INIT_FUNC_TRACE();

        ilt->start_line = FUNC_ILT_BASE(SC_FUNC(sc));

        /* CDU */
        ilt_client = &ilt->clients[ILT_CLIENT_CDU];
        ilt_client->client_num = ILT_CLIENT_CDU;
        ilt_client->page_size = CDU_ILT_PAGE_SZ;
        ilt_client->flags = ILT_CLIENT_SKIP_MEM;
        ilt_client->start = line;
        line += bnx2x_cid_ilt_lines(sc);

        if (CNIC_SUPPORT(sc)) {
                line += CNIC_ILT_LINES;
        }

        ilt_client->end = (line - 1);

        /* QM */
        if (QM_INIT(sc->qm_cid_count)) {
                ilt_client = &ilt->clients[ILT_CLIENT_QM];
                ilt_client->client_num = ILT_CLIENT_QM;
                ilt_client->page_size = QM_ILT_PAGE_SZ;
                ilt_client->flags = 0;
                ilt_client->start = line;

                /* 4 bytes for each cid */
                line += DIV_ROUND_UP(sc->qm_cid_count * QM_QUEUES_PER_FUNC * 4,
                                     QM_ILT_PAGE_SZ);

                ilt_client->end = (line - 1);
        }

        if (CNIC_SUPPORT(sc)) {
                /* SRC */
                ilt_client = &ilt->clients[ILT_CLIENT_SRC];
                ilt_client->client_num = ILT_CLIENT_SRC;
                ilt_client->page_size = SRC_ILT_PAGE_SZ;
                ilt_client->flags = 0;
                ilt_client->start = line;
                line += SRC_ILT_LINES;
                ilt_client->end = (line - 1);

                /* TM */
                ilt_client = &ilt->clients[ILT_CLIENT_TM];
                ilt_client->client_num = ILT_CLIENT_TM;
                ilt_client->page_size = TM_ILT_PAGE_SZ;
                ilt_client->flags = 0;
                ilt_client->start = line;
                line += TM_ILT_LINES;
                ilt_client->end = (line - 1);
        }

        assert((line <= ILT_MAX_LINES));
}

static void bnx2x_set_fp_rx_buf_size(struct bnx2x_softc *sc)
{
        int i;

        for (i = 0; i < sc->num_queues; i++) {
                /* get the Rx buffer size for RX frames */
                sc->fp[i].rx_buf_size =
                    (IP_HEADER_ALIGNMENT_PADDING + ETH_OVERHEAD + sc->mtu);
        }
}

int bnx2x_alloc_ilt_mem(struct bnx2x_softc *sc)
{

        sc->ilt = rte_malloc("", sizeof(struct ecore_ilt), RTE_CACHE_LINE_SIZE);

        return sc->ilt == NULL;
}

static int bnx2x_alloc_ilt_lines_mem(struct bnx2x_softc *sc)
{
        sc->ilt->lines = rte_calloc("",
                                    sizeof(struct ilt_line), ILT_MAX_LINES,
                                    RTE_CACHE_LINE_SIZE);
        return sc->ilt->lines == NULL;
}

void bnx2x_free_ilt_mem(struct bnx2x_softc *sc)
{
        rte_free(sc->ilt);
        sc->ilt = NULL;
}

static void bnx2x_free_ilt_lines_mem(struct bnx2x_softc *sc)
{
        if (sc->ilt->lines != NULL) {
                rte_free(sc->ilt->lines);
                sc->ilt->lines = NULL;
        }
}

static void bnx2x_free_mem(struct bnx2x_softc *sc)
{
        uint32_t i;

        for (i = 0; i < L2_ILT_LINES(sc); i++) {
                sc->context[i].vcxt = NULL;
                sc->context[i].size = 0;
        }

        ecore_ilt_mem_op(sc, ILT_MEMOP_FREE);

        bnx2x_free_ilt_lines_mem(sc);
}

static int bnx2x_alloc_mem(struct bnx2x_softc *sc)
{
        int context_size;
        int allocated;
        int i;
        char cdu_name[RTE_MEMZONE_NAMESIZE];

        /*
         * Allocate memory for CDU context:
         * This memory is allocated separately and not in the generic ILT
         * functions because CDU differs in few aspects:
         * 1. There can be multiple entities allocating memory for context -
         * regular L2, CNIC, and SRIOV drivers. Each separately controls
         * its own ILT lines.
         * 2. Since CDU page-size is not a single 4KB page (which is the case
         * for the other ILT clients), to be efficient we want to support
         * allocation of sub-page-size in the last entry.
         * 3. Context pointers are used by the driver to pass to FW / update
         * the context (for the other ILT clients the pointers are used just to
         * free the memory during unload).
         */
        context_size = (sizeof(union cdu_context) * BNX2X_L2_CID_COUNT(sc));
        for (i = 0, allocated = 0; allocated < context_size; i++) {
                sc->context[i].size = min(CDU_ILT_PAGE_SZ,
                                          (context_size - allocated));

                snprintf(cdu_name, sizeof(cdu_name), "cdu_%d", i);
                if (bnx2x_dma_alloc(sc, sc->context[i].size,
                                  &sc->context[i].vcxt_dma,
                                  cdu_name, BNX2X_PAGE_SIZE) != 0) {
                        bnx2x_free_mem(sc);
                        return -1;
                }

                sc->context[i].vcxt =
                    (union cdu_context *)sc->context[i].vcxt_dma.vaddr;

                allocated += sc->context[i].size;
        }

        bnx2x_alloc_ilt_lines_mem(sc);

        if (ecore_ilt_mem_op(sc, ILT_MEMOP_ALLOC)) {
                PMD_DRV_LOG(NOTICE, "ecore_ilt_mem_op ILT_MEMOP_ALLOC failed");
                bnx2x_free_mem(sc);
                return -1;
        }

        return 0;
}

static void bnx2x_free_fw_stats_mem(struct bnx2x_softc *sc)
{
        sc->fw_stats_num = 0;

        sc->fw_stats_req_size = 0;
        sc->fw_stats_req = NULL;
        sc->fw_stats_req_mapping = 0;

        sc->fw_stats_data_size = 0;
        sc->fw_stats_data = NULL;
        sc->fw_stats_data_mapping = 0;
}

static int bnx2x_alloc_fw_stats_mem(struct bnx2x_softc *sc)
{
        uint8_t num_queue_stats;
        int num_groups, vf_headroom = 0;

        /* number of queues for statistics is number of eth queues */
        num_queue_stats = BNX2X_NUM_ETH_QUEUES(sc);

        /*
         * Total number of FW statistics requests =
         *   1 for port stats + 1 for PF stats + num of queues
         */
        sc->fw_stats_num = (2 + num_queue_stats);

        /*
         * Request is built from stats_query_header and an array of
         * stats_query_cmd_group each of which contains STATS_QUERY_CMD_COUNT
         * rules. The real number or requests is configured in the
         * stats_query_header.
         */
        num_groups = (sc->fw_stats_num + vf_headroom) / STATS_QUERY_CMD_COUNT;
        if ((sc->fw_stats_num + vf_headroom) % STATS_QUERY_CMD_COUNT)
                num_groups++;

        sc->fw_stats_req_size =
            (sizeof(struct stats_query_header) +
             (num_groups * sizeof(struct stats_query_cmd_group)));

        /*
         * Data for statistics requests + stats_counter.
         * stats_counter holds per-STORM counters that are incremented when
         * STORM has finished with the current request. Memory for FCoE
         * offloaded statistics are counted anyway, even if they will not be sent.
         * VF stats are not accounted for here as the data of VF stats is stored
         * in memory allocated by the VF, not here.
         */
        sc->fw_stats_data_size =
            (sizeof(struct stats_counter) +
             sizeof(struct per_port_stats) + sizeof(struct per_pf_stats) +
             /* sizeof(struct fcoe_statistics_params) + */
             (sizeof(struct per_queue_stats) * num_queue_stats));

        if (bnx2x_dma_alloc(sc, (sc->fw_stats_req_size + sc->fw_stats_data_size),
                          &sc->fw_stats_dma, "fw_stats",
                          RTE_CACHE_LINE_SIZE) != 0) {
                bnx2x_free_fw_stats_mem(sc);
                return -1;
        }

        /* set up the shortcuts */

        sc->fw_stats_req = (struct bnx2x_fw_stats_req *)sc->fw_stats_dma.vaddr;
        sc->fw_stats_req_mapping = sc->fw_stats_dma.paddr;

        sc->fw_stats_data =
            (struct bnx2x_fw_stats_data *)((uint8_t *) sc->fw_stats_dma.vaddr +
                                         sc->fw_stats_req_size);
        sc->fw_stats_data_mapping = (sc->fw_stats_dma.paddr +
                                     sc->fw_stats_req_size);

        return 0;
}

/*
 * Bits map:
 * 0-7  - Engine0 load counter.
 * 8-15 - Engine1 load counter.
 * 16   - Engine0 RESET_IN_PROGRESS bit.
 * 17   - Engine1 RESET_IN_PROGRESS bit.
 * 18   - Engine0 ONE_IS_LOADED. Set when there is at least one active
 *        function on the engine
 * 19   - Engine1 ONE_IS_LOADED.
 * 20   - Chip reset flow bit. When set none-leader must wait for both engines
 *        leader to complete (check for both RESET_IN_PROGRESS bits and not
 *        for just the one belonging to its engine).
 */
#define BNX2X_RECOVERY_GLOB_REG     MISC_REG_GENERIC_POR_1
#define BNX2X_PATH0_LOAD_CNT_MASK   0x000000ff
#define BNX2X_PATH0_LOAD_CNT_SHIFT  0
#define BNX2X_PATH1_LOAD_CNT_MASK   0x0000ff00
#define BNX2X_PATH1_LOAD_CNT_SHIFT  8
#define BNX2X_PATH0_RST_IN_PROG_BIT 0x00010000
#define BNX2X_PATH1_RST_IN_PROG_BIT 0x00020000
#define BNX2X_GLOBAL_RESET_BIT      0x00040000

/* set the GLOBAL_RESET bit, should be run under rtnl lock */
static void bnx2x_set_reset_global(struct bnx2x_softc *sc)
{
        uint32_t val;
        bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
        val = REG_RD(sc, BNX2X_RECOVERY_GLOB_REG);
        REG_WR(sc, BNX2X_RECOVERY_GLOB_REG, val | BNX2X_GLOBAL_RESET_BIT);
        bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
}

/* clear the GLOBAL_RESET bit, should be run under rtnl lock */
static void bnx2x_clear_reset_global(struct bnx2x_softc *sc)
{
        uint32_t val;
        bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
        val = REG_RD(sc, BNX2X_RECOVERY_GLOB_REG);
        REG_WR(sc, BNX2X_RECOVERY_GLOB_REG, val & (~BNX2X_GLOBAL_RESET_BIT));
        bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
}

/* checks the GLOBAL_RESET bit, should be run under rtnl lock */
static uint8_t bnx2x_reset_is_global(struct bnx2x_softc *sc)
{
        return REG_RD(sc, BNX2X_RECOVERY_GLOB_REG) & BNX2X_GLOBAL_RESET_BIT;
}

/* clear RESET_IN_PROGRESS bit for the engine, should be run under rtnl lock */
static void bnx2x_set_reset_done(struct bnx2x_softc *sc)
{
        uint32_t val;
        uint32_t bit = SC_PATH(sc) ? BNX2X_PATH1_RST_IN_PROG_BIT :
            BNX2X_PATH0_RST_IN_PROG_BIT;

        bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);

        val = REG_RD(sc, BNX2X_RECOVERY_GLOB_REG);
        /* Clear the bit */
        val &= ~bit;
        REG_WR(sc, BNX2X_RECOVERY_GLOB_REG, val);

        bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
}

/* set RESET_IN_PROGRESS for the engine, should be run under rtnl lock */
static void bnx2x_set_reset_in_progress(struct bnx2x_softc *sc)
{
        uint32_t val;
        uint32_t bit = SC_PATH(sc) ? BNX2X_PATH1_RST_IN_PROG_BIT :
            BNX2X_PATH0_RST_IN_PROG_BIT;

        bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);

        val = REG_RD(sc, BNX2X_RECOVERY_GLOB_REG);
        /* Set the bit */
        val |= bit;
        REG_WR(sc, BNX2X_RECOVERY_GLOB_REG, val);

        bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
}

/* check RESET_IN_PROGRESS bit for an engine, should be run under rtnl lock */
static uint8_t bnx2x_reset_is_done(struct bnx2x_softc *sc, int engine)
{
        uint32_t val = REG_RD(sc, BNX2X_RECOVERY_GLOB_REG);
        uint32_t bit = engine ? BNX2X_PATH1_RST_IN_PROG_BIT :
            BNX2X_PATH0_RST_IN_PROG_BIT;

        /* return false if bit is set */
        return (val & bit) ? FALSE : TRUE;
}

/* get the load status for an engine, should be run under rtnl lock */
static uint8_t bnx2x_get_load_status(struct bnx2x_softc *sc, int engine)
{
        uint32_t mask = engine ? BNX2X_PATH1_LOAD_CNT_MASK :
            BNX2X_PATH0_LOAD_CNT_MASK;
        uint32_t shift = engine ? BNX2X_PATH1_LOAD_CNT_SHIFT :
            BNX2X_PATH0_LOAD_CNT_SHIFT;
        uint32_t val = REG_RD(sc, BNX2X_RECOVERY_GLOB_REG);

        val = ((val & mask) >> shift);

        return val != 0;
}

/* set pf load mark */
static void bnx2x_set_pf_load(struct bnx2x_softc *sc)
{
        uint32_t val;
        uint32_t val1;
        uint32_t mask = SC_PATH(sc) ? BNX2X_PATH1_LOAD_CNT_MASK :
            BNX2X_PATH0_LOAD_CNT_MASK;
        uint32_t shift = SC_PATH(sc) ? BNX2X_PATH1_LOAD_CNT_SHIFT :
            BNX2X_PATH0_LOAD_CNT_SHIFT;

        bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);

        PMD_INIT_FUNC_TRACE();

        val = REG_RD(sc, BNX2X_RECOVERY_GLOB_REG);

        /* get the current counter value */
        val1 = ((val & mask) >> shift);

        /* set bit of this PF */
        val1 |= (1 << SC_ABS_FUNC(sc));

        /* clear the old value */
        val &= ~mask;

        /* set the new one */
        val |= ((val1 << shift) & mask);

        REG_WR(sc, BNX2X_RECOVERY_GLOB_REG, val);

        bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
}

/* clear pf load mark */
static uint8_t bnx2x_clear_pf_load(struct bnx2x_softc *sc)
{
        uint32_t val1, val;
        uint32_t mask = SC_PATH(sc) ? BNX2X_PATH1_LOAD_CNT_MASK :
            BNX2X_PATH0_LOAD_CNT_MASK;
        uint32_t shift = SC_PATH(sc) ? BNX2X_PATH1_LOAD_CNT_SHIFT :
            BNX2X_PATH0_LOAD_CNT_SHIFT;

        bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
        val = REG_RD(sc, BNX2X_RECOVERY_GLOB_REG);

        /* get the current counter value */
        val1 = (val & mask) >> shift;

        /* clear bit of that PF */
        val1 &= ~(1 << SC_ABS_FUNC(sc));

        /* clear the old value */
        val &= ~mask;

        /* set the new one */
        val |= ((val1 << shift) & mask);

        REG_WR(sc, BNX2X_RECOVERY_GLOB_REG, val);
        bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
        return val1 != 0;
}

/* send load requrest to mcp and analyze response */
static int bnx2x_nic_load_request(struct bnx2x_softc *sc, uint32_t * load_code)
{
        PMD_INIT_FUNC_TRACE();

        /* init fw_seq */
        sc->fw_seq =
            (SHMEM_RD(sc, func_mb[SC_FW_MB_IDX(sc)].drv_mb_header) &
             DRV_MSG_SEQ_NUMBER_MASK);

        PMD_DRV_LOG(DEBUG, "initial fw_seq 0x%04x", sc->fw_seq);

#ifdef BNX2X_PULSE
        /* get the current FW pulse sequence */
        sc->fw_drv_pulse_wr_seq =
            (SHMEM_RD(sc, func_mb[SC_FW_MB_IDX(sc)].drv_pulse_mb) &
             DRV_PULSE_SEQ_MASK);
#else
        /* set ALWAYS_ALIVE bit in shmem */
        sc->fw_drv_pulse_wr_seq |= DRV_PULSE_ALWAYS_ALIVE;
        bnx2x_drv_pulse(sc);
#endif

        /* load request */
        (*load_code) = bnx2x_fw_command(sc, DRV_MSG_CODE_LOAD_REQ,
                                      DRV_MSG_CODE_LOAD_REQ_WITH_LFA);

        /* if the MCP fails to respond we must abort */
        if (!(*load_code)) {
                PMD_DRV_LOG(NOTICE, "MCP response failure!");
                return -1;
        }

        /* if MCP refused then must abort */
        if ((*load_code) == FW_MSG_CODE_DRV_LOAD_REFUSED) {
                PMD_DRV_LOG(NOTICE, "MCP refused load request");
                return -1;
        }

        return 0;
}

/*
 * Check whether another PF has already loaded FW to chip. In virtualized
 * environments a pf from anoth VM may have already initialized the device
 * including loading FW.
 */
static int bnx2x_nic_load_analyze_req(struct bnx2x_softc *sc, uint32_t load_code)
{
        uint32_t my_fw, loaded_fw;

        /* is another pf loaded on this engine? */
        if ((load_code != FW_MSG_CODE_DRV_LOAD_COMMON_CHIP) &&
            (load_code != FW_MSG_CODE_DRV_LOAD_COMMON)) {
                /* build my FW version dword */
                my_fw = (BNX2X_5710_FW_MAJOR_VERSION +
                         (BNX2X_5710_FW_MINOR_VERSION << 8) +
                         (BNX2X_5710_FW_REVISION_VERSION << 16) +
                         (BNX2X_5710_FW_ENGINEERING_VERSION << 24));

                /* read loaded FW from chip */
                loaded_fw = REG_RD(sc, XSEM_REG_PRAM);
                PMD_DRV_LOG(DEBUG, "loaded FW 0x%08x / my FW 0x%08x",
                            loaded_fw, my_fw);

                /* abort nic load if version mismatch */
                if (my_fw != loaded_fw) {
                        PMD_DRV_LOG(NOTICE,
                                    "FW 0x%08x already loaded (mine is 0x%08x)",
                                    loaded_fw, my_fw);
                        return -1;
                }
        }

        return 0;
}

/* mark PMF if applicable */
static void bnx2x_nic_load_pmf(struct bnx2x_softc *sc, uint32_t load_code)
{
        uint32_t ncsi_oem_data_addr;

        PMD_INIT_FUNC_TRACE();

        if ((load_code == FW_MSG_CODE_DRV_LOAD_COMMON) ||
            (load_code == FW_MSG_CODE_DRV_LOAD_COMMON_CHIP) ||
            (load_code == FW_MSG_CODE_DRV_LOAD_PORT)) {
                /*
                 * Barrier here for ordering between the writing to sc->port.pmf here
                 * and reading it from the periodic task.
                 */
                sc->port.pmf = 1;
                mb();
        } else {
                sc->port.pmf = 0;
        }

        PMD_DRV_LOG(DEBUG, "pmf %d", sc->port.pmf);

        if (load_code == FW_MSG_CODE_DRV_LOAD_COMMON_CHIP) {
                if (SHMEM2_HAS(sc, ncsi_oem_data_addr)) {
                        ncsi_oem_data_addr = SHMEM2_RD(sc, ncsi_oem_data_addr);
                        if (ncsi_oem_data_addr) {
                                REG_WR(sc,
                                       (ncsi_oem_data_addr +
                                        offsetof(struct glob_ncsi_oem_data,
                                                 driver_version)), 0);
                        }
                }
        }
}

static void bnx2x_read_mf_cfg(struct bnx2x_softc *sc)
{
        int n = (CHIP_IS_MODE_4_PORT(sc) ? 2 : 1);
        int abs_func;
        int vn;

        if (BNX2X_NOMCP(sc)) {
                return;         /* what should be the default bvalue in this case */
        }

        /*
         * The formula for computing the absolute function number is...
         * For 2 port configuration (4 functions per port):
         *   abs_func = 2 * vn + SC_PORT + SC_PATH
         * For 4 port configuration (2 functions per port):
         *   abs_func = 4 * vn + 2 * SC_PORT + SC_PATH
         */
        for (vn = VN_0; vn < SC_MAX_VN_NUM(sc); vn++) {
                abs_func = (n * (2 * vn + SC_PORT(sc)) + SC_PATH(sc));
                if (abs_func >= E1H_FUNC_MAX) {
                        break;
                }
                sc->devinfo.mf_info.mf_config[vn] =
                    MFCFG_RD(sc, func_mf_config[abs_func].config);
        }

        if (sc->devinfo.mf_info.mf_config[SC_VN(sc)] &
            FUNC_MF_CFG_FUNC_DISABLED) {
                PMD_DRV_LOG(DEBUG, "mf_cfg function disabled");
                sc->flags |= BNX2X_MF_FUNC_DIS;
        } else {
                PMD_DRV_LOG(DEBUG, "mf_cfg function enabled");
                sc->flags &= ~BNX2X_MF_FUNC_DIS;
        }
}

/* acquire split MCP access lock register */
static int bnx2x_acquire_alr(struct bnx2x_softc *sc)
{
        uint32_t j, val;

        for (j = 0; j < 1000; j++) {
                val = (1UL << 31);
                REG_WR(sc, GRCBASE_MCP + 0x9c, val);
                val = REG_RD(sc, GRCBASE_MCP + 0x9c);
                if (val & (1L << 31))
                        break;

                DELAY(5000);
        }

        if (!(val & (1L << 31))) {
                PMD_DRV_LOG(NOTICE, "Cannot acquire MCP access lock register");
                return -1;
        }

        return 0;
}

/* release split MCP access lock register */
static void bnx2x_release_alr(struct bnx2x_softc *sc)
{
        REG_WR(sc, GRCBASE_MCP + 0x9c, 0);
}

static void bnx2x_fan_failure(struct bnx2x_softc *sc)
{
        int port = SC_PORT(sc);
        uint32_t ext_phy_config;

        /* mark the failure */
        ext_phy_config =
            SHMEM_RD(sc, dev_info.port_hw_config[port].external_phy_config);

        ext_phy_config &= ~PORT_HW_CFG_XGXS_EXT_PHY_TYPE_MASK;
        ext_phy_config |= PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE;
        SHMEM_WR(sc, dev_info.port_hw_config[port].external_phy_config,
                 ext_phy_config);

        /* log the failure */
        PMD_DRV_LOG(INFO,
                    "Fan Failure has caused the driver to shutdown "
                    "the card to prevent permanent damage. "
                    "Please contact OEM Support for assistance");

        rte_panic("Schedule task to handle fan failure");
}

/* this function is called upon a link interrupt */
static void bnx2x_link_attn(struct bnx2x_softc *sc)
{
        uint32_t pause_enabled = 0;
        struct host_port_stats *pstats;
        int cmng_fns;

        /* Make sure that we are synced with the current statistics */
        bnx2x_stats_handle(sc, STATS_EVENT_STOP);

        elink_link_update(&sc->link_params, &sc->link_vars);

        if (sc->link_vars.link_up) {

                /* dropless flow control */
                if (sc->dropless_fc) {
                        pause_enabled = 0;

                        if (sc->link_vars.flow_ctrl & ELINK_FLOW_CTRL_TX) {
                                pause_enabled = 1;
                        }

                        REG_WR(sc,
                               (BAR_USTRORM_INTMEM +
                                USTORM_ETH_PAUSE_ENABLED_OFFSET(SC_PORT(sc))),
                               pause_enabled);
                }

                if (sc->link_vars.mac_type != ELINK_MAC_TYPE_EMAC) {
                        pstats = BNX2X_SP(sc, port_stats);
                        /* reset old mac stats */
                        memset(&(pstats->mac_stx[0]), 0,
                               sizeof(struct mac_stx));
                }

                if (sc->state == BNX2X_STATE_OPEN) {
                        bnx2x_stats_handle(sc, STATS_EVENT_LINK_UP);
                }
        }

        if (sc->link_vars.link_up && sc->link_vars.line_speed) {
                cmng_fns = bnx2x_get_cmng_fns_mode(sc);

                if (cmng_fns != CMNG_FNS_NONE) {
                        bnx2x_cmng_fns_init(sc, FALSE, cmng_fns);
                        storm_memset_cmng(sc, &sc->cmng, SC_PORT(sc));
                }
        }

        bnx2x_link_report(sc);

        if (IS_MF(sc)) {
                bnx2x_link_sync_notify(sc);
        }
}

static void bnx2x_attn_int_asserted(struct bnx2x_softc *sc, uint32_t asserted)
{
        int port = SC_PORT(sc);
        uint32_t aeu_addr = port ? MISC_REG_AEU_MASK_ATTN_FUNC_1 :
            MISC_REG_AEU_MASK_ATTN_FUNC_0;
        uint32_t nig_int_mask_addr = port ? NIG_REG_MASK_INTERRUPT_PORT1 :
            NIG_REG_MASK_INTERRUPT_PORT0;
        uint32_t aeu_mask;
        uint32_t nig_mask = 0;
        uint32_t reg_addr;
        uint32_t igu_acked;
        uint32_t cnt;

        if (sc->attn_state & asserted) {
                PMD_DRV_LOG(ERR, "IGU ERROR attn=0x%08x", asserted);
        }

        bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port);

        aeu_mask = REG_RD(sc, aeu_addr);

        aeu_mask &= ~(asserted & 0x3ff);

        REG_WR(sc, aeu_addr, aeu_mask);

        bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port);

        sc->attn_state |= asserted;

        if (asserted & ATTN_HARD_WIRED_MASK) {
                if (asserted & ATTN_NIG_FOR_FUNC) {

                        /* save nig interrupt mask */
                        nig_mask = REG_RD(sc, nig_int_mask_addr);

                        /* If nig_mask is not set, no need to call the update function */
                        if (nig_mask) {
                                REG_WR(sc, nig_int_mask_addr, 0);

                                bnx2x_link_attn(sc);
                        }

                        /* handle unicore attn? */
                }

                if (asserted & ATTN_SW_TIMER_4_FUNC) {
                        PMD_DRV_LOG(DEBUG, "ATTN_SW_TIMER_4_FUNC!");
                }

                if (asserted & GPIO_2_FUNC) {
                        PMD_DRV_LOG(DEBUG, "GPIO_2_FUNC!");
                }

                if (asserted & GPIO_3_FUNC) {
                        PMD_DRV_LOG(DEBUG, "GPIO_3_FUNC!");
                }

                if (asserted & GPIO_4_FUNC) {
                        PMD_DRV_LOG(DEBUG, "GPIO_4_FUNC!");
                }

                if (port == 0) {
                        if (asserted & ATTN_GENERAL_ATTN_1) {
                                PMD_DRV_LOG(DEBUG, "ATTN_GENERAL_ATTN_1!");
                                REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_1, 0x0);
                        }
                        if (asserted & ATTN_GENERAL_ATTN_2) {
                                PMD_DRV_LOG(DEBUG, "ATTN_GENERAL_ATTN_2!");
                                REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_2, 0x0);
                        }
                        if (asserted & ATTN_GENERAL_ATTN_3) {
                                PMD_DRV_LOG(DEBUG, "ATTN_GENERAL_ATTN_3!");
                                REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_3, 0x0);
                        }
                } else {
                        if (asserted & ATTN_GENERAL_ATTN_4) {
                                PMD_DRV_LOG(DEBUG, "ATTN_GENERAL_ATTN_4!");
                                REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_4, 0x0);
                        }
                        if (asserted & ATTN_GENERAL_ATTN_5) {
                                PMD_DRV_LOG(DEBUG, "ATTN_GENERAL_ATTN_5!");
                                REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_5, 0x0);
                        }
                        if (asserted & ATTN_GENERAL_ATTN_6) {
                                PMD_DRV_LOG(DEBUG, "ATTN_GENERAL_ATTN_6!");
                                REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_6, 0x0);
                        }
                }
        }
        /* hardwired */
        if (sc->devinfo.int_block == INT_BLOCK_HC) {
                reg_addr =
                    (HC_REG_COMMAND_REG + port * 32 +
                     COMMAND_REG_ATTN_BITS_SET);
        } else {
                reg_addr = (BAR_IGU_INTMEM + IGU_CMD_ATTN_BIT_SET_UPPER * 8);
        }

        PMD_DRV_LOG(DEBUG, "about to mask 0x%08x at %s addr 0x%08x",
                    asserted,
                    (sc->devinfo.int_block == INT_BLOCK_HC) ? "HC" : "IGU",
                    reg_addr);
        REG_WR(sc, reg_addr, asserted);

        /* now set back the mask */
        if (asserted & ATTN_NIG_FOR_FUNC) {
                /*
                 * Verify that IGU ack through BAR was written before restoring
                 * NIG mask. This loop should exit after 2-3 iterations max.
                 */
                if (sc->devinfo.int_block != INT_BLOCK_HC) {
                        cnt = 0;

                        do {
                                igu_acked =
                                    REG_RD(sc, IGU_REG_ATTENTION_ACK_BITS);
                        } while (((igu_acked & ATTN_NIG_FOR_FUNC) == 0)
                                 && (++cnt < MAX_IGU_ATTN_ACK_TO));

                        if (!igu_acked) {
                                PMD_DRV_LOG(ERR,
                                            "Failed to verify IGU ack on time");
                        }

                        mb();
                }

                REG_WR(sc, nig_int_mask_addr, nig_mask);

        }
}

static void
bnx2x_print_next_block(__rte_unused struct bnx2x_softc *sc, __rte_unused int idx,
                     __rte_unused const char *blk)
{
        PMD_DRV_LOG(INFO, "%s%s", idx ? ", " : "", blk);
}

static int
bnx2x_check_blocks_with_parity0(struct bnx2x_softc *sc, uint32_t sig, int par_num,
                              uint8_t print)
{
        uint32_t cur_bit = 0;
        int i = 0;

        for (i = 0; sig; i++) {
                cur_bit = ((uint32_t) 0x1 << i);
                if (sig & cur_bit) {
                        switch (cur_bit) {
                        case AEU_INPUTS_ATTN_BITS_BRB_PARITY_ERROR:
                                if (print)
                                        bnx2x_print_next_block(sc, par_num++,
                                                             "BRB");
                                break;
                        case AEU_INPUTS_ATTN_BITS_PARSER_PARITY_ERROR:
                                if (print)
                                        bnx2x_print_next_block(sc, par_num++,
                                                             "PARSER");
                                break;
                        case AEU_INPUTS_ATTN_BITS_TSDM_PARITY_ERROR:
                                if (print)
                                        bnx2x_print_next_block(sc, par_num++,
                                                             "TSDM");
                                break;
                        case AEU_INPUTS_ATTN_BITS_SEARCHER_PARITY_ERROR:
                                if (print)
                                        bnx2x_print_next_block(sc, par_num++,
                                                             "SEARCHER");
                                break;
                        case AEU_INPUTS_ATTN_BITS_TCM_PARITY_ERROR:
                                if (print)
                                        bnx2x_print_next_block(sc, par_num++,
                                                             "TCM");
                                break;
                        case AEU_INPUTS_ATTN_BITS_TSEMI_PARITY_ERROR:
                                if (print)
                                        bnx2x_print_next_block(sc, par_num++,
                                                             "TSEMI");
                                break;
                        case AEU_INPUTS_ATTN_BITS_PBCLIENT_PARITY_ERROR:
                                if (print)
                                        bnx2x_print_next_block(sc, par_num++,
                                                             "XPB");
                                break;
                        }

                        /* Clear the bit */
                        sig &= ~cur_bit;
                }
        }

        return par_num;
}

static int
bnx2x_check_blocks_with_parity1(struct bnx2x_softc *sc, uint32_t sig, int par_num,
                              uint8_t * global, uint8_t print)
{
        int i = 0;
        uint32_t cur_bit = 0;
        for (i = 0; sig; i++) {
                cur_bit = ((uint32_t) 0x1 << i);
                if (sig & cur_bit) {
                        switch (cur_bit) {
                        case AEU_INPUTS_ATTN_BITS_PBF_PARITY_ERROR:
                                if (print)
                                        bnx2x_print_next_block(sc, par_num++,
                                                             "PBF");
                                break;
                        case AEU_INPUTS_ATTN_BITS_QM_PARITY_ERROR:
                                if (print)
                                        bnx2x_print_next_block(sc, par_num++,
                                                             "QM");
                                break;
                        case AEU_INPUTS_ATTN_BITS_TIMERS_PARITY_ERROR:
                                if (print)
                                        bnx2x_print_next_block(sc, par_num++,
                                                             "TM");
                                break;
                        case AEU_INPUTS_ATTN_BITS_XSDM_PARITY_ERROR:
                                if (print)
                                        bnx2x_print_next_block(sc, par_num++,
                                                             "XSDM");
                                break;
                        case AEU_INPUTS_ATTN_BITS_XCM_PARITY_ERROR:
                                if (print)
                                        bnx2x_print_next_block(sc, par_num++,
                                                             "XCM");
                                break;
                        case AEU_INPUTS_ATTN_BITS_XSEMI_PARITY_ERROR:
                                if (print)
                                        bnx2x_print_next_block(sc, par_num++,
                                                             "XSEMI");
                                break;
                        case AEU_INPUTS_ATTN_BITS_DOORBELLQ_PARITY_ERROR:
                                if (print)
                                        bnx2x_print_next_block(sc, par_num++,
                                                             "DOORBELLQ");
                                break;
                        case AEU_INPUTS_ATTN_BITS_NIG_PARITY_ERROR:
                                if (print)
                                        bnx2x_print_next_block(sc, par_num++,
                                                             "NIG");
                                break;
                        case AEU_INPUTS_ATTN_BITS_VAUX_PCI_CORE_PARITY_ERROR:
                                if (print)
                                        bnx2x_print_next_block(sc, par_num++,
                                                             "VAUX PCI CORE");
                                *global = TRUE;
                                break;
                        case AEU_INPUTS_ATTN_BITS_DEBUG_PARITY_ERROR:
                                if (print)
                                        bnx2x_print_next_block(sc, par_num++,
                                                             "DEBUG");
                                break;
                        case AEU_INPUTS_ATTN_BITS_USDM_PARITY_ERROR:
                                if (print)
                                        bnx2x_print_next_block(sc, par_num++,
                                                             "USDM");
                                break;
                        case AEU_INPUTS_ATTN_BITS_UCM_PARITY_ERROR:
                                if (print)
                                        bnx2x_print_next_block(sc, par_num++,
                                                             "UCM");
                                break;
                        case AEU_INPUTS_ATTN_BITS_USEMI_PARITY_ERROR:
                                if (print)
                                        bnx2x_print_next_block(sc, par_num++,
                                                             "USEMI");
                                break;
                        case AEU_INPUTS_ATTN_BITS_UPB_PARITY_ERROR:
                                if (print)
                                        bnx2x_print_next_block(sc, par_num++,
                                                             "UPB");
                                break;
                        case AEU_INPUTS_ATTN_BITS_CSDM_PARITY_ERROR:
                                if (print)
                                        bnx2x_print_next_block(sc, par_num++,
                                                             "CSDM");
                                break;
                        case AEU_INPUTS_ATTN_BITS_CCM_PARITY_ERROR:
                                if (print)
                                        bnx2x_print_next_block(sc, par_num++,
                                                             "CCM");
                                break;
                        }

                        /* Clear the bit */
                        sig &= ~cur_bit;
                }
        }

        return par_num;
}

static int
bnx2x_check_blocks_with_parity2(struct bnx2x_softc *sc, uint32_t sig, int par_num,
                              uint8_t print)
{
        uint32_t cur_bit = 0;
        int i = 0;

        for (i = 0; sig; i++) {
                cur_bit = ((uint32_t) 0x1 << i);
                if (sig & cur_bit) {
                        switch (cur_bit) {
                        case AEU_INPUTS_ATTN_BITS_CSEMI_PARITY_ERROR:
                                if (print)
                                        bnx2x_print_next_block(sc, par_num++,
                                                             "CSEMI");
                                break;
                        case AEU_INPUTS_ATTN_BITS_PXP_PARITY_ERROR:
                                if (print)
                                        bnx2x_print_next_block(sc, par_num++,
                                                             "PXP");
                                break;
                        case AEU_IN_ATTN_BITS_PXPPCICLOCKCLIENT_PARITY_ERROR:
                                if (print)
                                        bnx2x_print_next_block(sc, par_num++,
                                                             "PXPPCICLOCKCLIENT");
                                break;
                        case AEU_INPUTS_ATTN_BITS_CFC_PARITY_ERROR:
                                if (print)
                                        bnx2x_print_next_block(sc, par_num++,
                                                             "CFC");
                                break;
                        case AEU_INPUTS_ATTN_BITS_CDU_PARITY_ERROR:
                                if (print)
                                        bnx2x_print_next_block(sc, par_num++,
                                                             "CDU");
                                break;
                        case AEU_INPUTS_ATTN_BITS_DMAE_PARITY_ERROR:
                                if (print)
                                        bnx2x_print_next_block(sc, par_num++,
                                                             "DMAE");
                                break;
                        case AEU_INPUTS_ATTN_BITS_IGU_PARITY_ERROR:
                                if (print)
                                        bnx2x_print_next_block(sc, par_num++,
                                                             "IGU");
                                break;
                        case AEU_INPUTS_ATTN_BITS_MISC_PARITY_ERROR:
                                if (print)
                                        bnx2x_print_next_block(sc, par_num++,
                                                             "MISC");
                                break;
                        }

                        /* Clear the bit */
                        sig &= ~cur_bit;
                }
        }

        return par_num;
}

static int
bnx2x_check_blocks_with_parity3(struct bnx2x_softc *sc, uint32_t sig, int par_num,
                              uint8_t * global, uint8_t print)
{
        uint32_t cur_bit = 0;
        int i = 0;

        for (i = 0; sig; i++) {
                cur_bit = ((uint32_t) 0x1 << i);
                if (sig & cur_bit) {
                        switch (cur_bit) {
                        case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_ROM_PARITY:
                                if (print)
                                        bnx2x_print_next_block(sc, par_num++,
                                                             "MCP ROM");
                                *global = TRUE;
                                break;
                        case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_RX_PARITY:
                                if (print)
                                        bnx2x_print_next_block(sc, par_num++,
                                                             "MCP UMP RX");
                                *global = TRUE;
                                break;
                        case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_TX_PARITY:
                                if (print)
                                        bnx2x_print_next_block(sc, par_num++,
                                                             "MCP UMP TX");
                                *global = TRUE;
                                break;
                        case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY:
                                if (print)
                                        bnx2x_print_next_block(sc, par_num++,
                                                             "MCP SCPAD");
                                *global = TRUE;
                                break;
                        }

                        /* Clear the bit */
                        sig &= ~cur_bit;
                }
        }

        return par_num;
}

static int
bnx2x_check_blocks_with_parity4(struct bnx2x_softc *sc, uint32_t sig, int par_num,
                              uint8_t print)
{
        uint32_t cur_bit = 0;
        int i = 0;

        for (i = 0; sig; i++) {
                cur_bit = ((uint32_t) 0x1 << i);
                if (sig & cur_bit) {
                        switch (cur_bit) {
                        case AEU_INPUTS_ATTN_BITS_PGLUE_PARITY_ERROR:
                                if (print)
                                        bnx2x_print_next_block(sc, par_num++,
                                                             "PGLUE_B");
                                break;
                        case AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR:
                                if (print)
                                        bnx2x_print_next_block(sc, par_num++,
                                                             "ATC");
                                break;
                        }

                        /* Clear the bit */
                        sig &= ~cur_bit;
                }
        }

        return par_num;
}

static uint8_t
bnx2x_parity_attn(struct bnx2x_softc *sc, uint8_t * global, uint8_t print,
                uint32_t * sig)
{
        int par_num = 0;

        if ((sig[0] & HW_PRTY_ASSERT_SET_0) ||
            (sig[1] & HW_PRTY_ASSERT_SET_1) ||
            (sig[2] & HW_PRTY_ASSERT_SET_2) ||
            (sig[3] & HW_PRTY_ASSERT_SET_3) ||
            (sig[4] & HW_PRTY_ASSERT_SET_4)) {
                PMD_DRV_LOG(ERR,
                            "Parity error: HW block parity attention:"
                            "[0]:0x%08x [1]:0x%08x [2]:0x%08x [3]:0x%08x [4]:0x%08x",
                            (uint32_t) (sig[0] & HW_PRTY_ASSERT_SET_0),
                            (uint32_t) (sig[1] & HW_PRTY_ASSERT_SET_1),
                            (uint32_t) (sig[2] & HW_PRTY_ASSERT_SET_2),
                            (uint32_t) (sig[3] & HW_PRTY_ASSERT_SET_3),
                            (uint32_t) (sig[4] & HW_PRTY_ASSERT_SET_4));

                if (print)
                        PMD_DRV_LOG(INFO, "Parity errors detected in blocks: ");

                par_num =
                    bnx2x_check_blocks_with_parity0(sc, sig[0] &
                                                  HW_PRTY_ASSERT_SET_0,
                                                  par_num, print);
                par_num =
                    bnx2x_check_blocks_with_parity1(sc, sig[1] &
                                                  HW_PRTY_ASSERT_SET_1,
                                                  par_num, global, print);
                par_num =
                    bnx2x_check_blocks_with_parity2(sc, sig[2] &
                                                  HW_PRTY_ASSERT_SET_2,
                                                  par_num, print);
                par_num =
                    bnx2x_check_blocks_with_parity3(sc, sig[3] &
                                                  HW_PRTY_ASSERT_SET_3,
                                                  par_num, global, print);
                par_num =
                    bnx2x_check_blocks_with_parity4(sc, sig[4] &
                                                  HW_PRTY_ASSERT_SET_4,
                                                  par_num, print);

                if (print)
                        PMD_DRV_LOG(INFO, "");

                return TRUE;
        }

        return FALSE;
}

static uint8_t
bnx2x_chk_parity_attn(struct bnx2x_softc *sc, uint8_t * global, uint8_t print)
{
        struct attn_route attn = { {0} };
        int port = SC_PORT(sc);

        attn.sig[0] = REG_RD(sc, MISC_REG_AEU_AFTER_INVERT_1_FUNC_0 + port * 4);
        attn.sig[1] = REG_RD(sc, MISC_REG_AEU_AFTER_INVERT_2_FUNC_0 + port * 4);
        attn.sig[2] = REG_RD(sc, MISC_REG_AEU_AFTER_INVERT_3_FUNC_0 + port * 4);
        attn.sig[3] = REG_RD(sc, MISC_REG_AEU_AFTER_INVERT_4_FUNC_0 + port * 4);

        if (!CHIP_IS_E1x(sc))
                attn.sig[4] =
                    REG_RD(sc, MISC_REG_AEU_AFTER_INVERT_5_FUNC_0 + port * 4);

        return bnx2x_parity_attn(sc, global, print, attn.sig);
}

static void bnx2x_attn_int_deasserted4(struct bnx2x_softc *sc, uint32_t attn)
{
        uint32_t val;

        if (attn & AEU_INPUTS_ATTN_BITS_PGLUE_HW_INTERRUPT) {
                val = REG_RD(sc, PGLUE_B_REG_PGLUE_B_INT_STS_CLR);
                PMD_DRV_LOG(INFO, "ERROR: PGLUE hw attention 0x%08x", val);
                if (val & PGLUE_B_PGLUE_B_INT_STS_REG_ADDRESS_ERROR)
                        PMD_DRV_LOG(INFO,
                                    "ERROR: PGLUE_B_PGLUE_B_INT_STS_REG_ADDRESS_ERROR");
                if (val & PGLUE_B_PGLUE_B_INT_STS_REG_INCORRECT_RCV_BEHAVIOR)
                        PMD_DRV_LOG(INFO,
                                    "ERROR: PGLUE_B_PGLUE_B_INT_STS_REG_INCORRECT_RCV_BEHAVIOR");
                if (val & PGLUE_B_PGLUE_B_INT_STS_REG_WAS_ERROR_ATTN)
                        PMD_DRV_LOG(INFO,
                                    "ERROR: PGLUE_B_PGLUE_B_INT_STS_REG_WAS_ERROR_ATTN");
                if (val & PGLUE_B_PGLUE_B_INT_STS_REG_VF_LENGTH_VIOLATION_ATTN)
                        PMD_DRV_LOG(INFO,
                                    "ERROR: PGLUE_B_PGLUE_B_INT_STS_REG_VF_LENGTH_VIOLATION_ATTN");
                if (val &
                    PGLUE_B_PGLUE_B_INT_STS_REG_VF_GRC_SPACE_VIOLATION_ATTN)
                        PMD_DRV_LOG(INFO,
                                    "ERROR: PGLUE_B_PGLUE_B_INT_STS_REG_VF_GRC_SPACE_VIOLATION_ATTN");
                if (val &
                    PGLUE_B_PGLUE_B_INT_STS_REG_VF_MSIX_BAR_VIOLATION_ATTN)
                        PMD_DRV_LOG(INFO,
                                    "ERROR: PGLUE_B_PGLUE_B_INT_STS_REG_VF_MSIX_BAR_VIOLATION_ATTN");
                if (val & PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_ERROR_ATTN)
                        PMD_DRV_LOG(INFO,
                                    "ERROR: PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_ERROR_ATTN");
                if (val & PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_IN_TWO_RCBS_ATTN)
                        PMD_DRV_LOG(INFO,
                                    "ERROR: PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_IN_TWO_RCBS_ATTN");
                if (val & PGLUE_B_PGLUE_B_INT_STS_REG_CSSNOOP_FIFO_OVERFLOW)
                        PMD_DRV_LOG(INFO,
                                    "ERROR: PGLUE_B_PGLUE_B_INT_STS_REG_CSSNOOP_FIFO_OVERFLOW");
        }

        if (attn & AEU_INPUTS_ATTN_BITS_ATC_HW_INTERRUPT) {
                val = REG_RD(sc, ATC_REG_ATC_INT_STS_CLR);
                PMD_DRV_LOG(INFO, "ERROR: ATC hw attention 0x%08x", val);
                if (val & ATC_ATC_INT_STS_REG_ADDRESS_ERROR)
                        PMD_DRV_LOG(INFO,
                                    "ERROR: ATC_ATC_INT_STS_REG_ADDRESS_ERROR");
                if (val & ATC_ATC_INT_STS_REG_ATC_TCPL_TO_NOT_PEND)
                        PMD_DRV_LOG(INFO,
                                    "ERROR: ATC_ATC_INT_STS_REG_ATC_TCPL_TO_NOT_PEND");
                if (val & ATC_ATC_INT_STS_REG_ATC_GPA_MULTIPLE_HITS)
                        PMD_DRV_LOG(INFO,
                                    "ERROR: ATC_ATC_INT_STS_REG_ATC_GPA_MULTIPLE_HITS");
                if (val & ATC_ATC_INT_STS_REG_ATC_RCPL_TO_EMPTY_CNT)
                        PMD_DRV_LOG(INFO,
                                    "ERROR: ATC_ATC_INT_STS_REG_ATC_RCPL_TO_EMPTY_CNT");
                if (val & ATC_ATC_INT_STS_REG_ATC_TCPL_ERROR)
                        PMD_DRV_LOG(INFO,
                                    "ERROR: ATC_ATC_INT_STS_REG_ATC_TCPL_ERROR");
                if (val & ATC_ATC_INT_STS_REG_ATC_IREQ_LESS_THAN_STU)
                        PMD_DRV_LOG(INFO,
                                    "ERROR: ATC_ATC_INT_STS_REG_ATC_IREQ_LESS_THAN_STU");
        }

        if (attn & (AEU_INPUTS_ATTN_BITS_PGLUE_PARITY_ERROR |
                    AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR)) {
                PMD_DRV_LOG(INFO,
                            "ERROR: FATAL parity attention set4 0x%08x",
                            (uint32_t) (attn &
                                        (AEU_INPUTS_ATTN_BITS_PGLUE_PARITY_ERROR
                                         |
                                         AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR)));
        }
}

static void bnx2x_e1h_disable(struct bnx2x_softc *sc)
{
        int port = SC_PORT(sc);

        REG_WR(sc, NIG_REG_LLH0_FUNC_EN + port * 8, 0);
}

static void bnx2x_e1h_enable(struct bnx2x_softc *sc)
{
        int port = SC_PORT(sc);

        REG_WR(sc, NIG_REG_LLH0_FUNC_EN + port * 8, 1);
}

/*
 * called due to MCP event (on pmf):
 *   reread new bandwidth configuration
 *   configure FW
 *   notify others function about the change
 */
static void bnx2x_config_mf_bw(struct bnx2x_softc *sc)
{
        if (sc->link_vars.link_up) {
                bnx2x_cmng_fns_init(sc, TRUE, CMNG_FNS_MINMAX);
                bnx2x_link_sync_notify(sc);
        }

        storm_memset_cmng(sc, &sc->cmng, SC_PORT(sc));
}

static void bnx2x_set_mf_bw(struct bnx2x_softc *sc)
{
        bnx2x_config_mf_bw(sc);
        bnx2x_fw_command(sc, DRV_MSG_CODE_SET_MF_BW_ACK, 0);
}

static void bnx2x_handle_eee_event(struct bnx2x_softc *sc)
{
        bnx2x_fw_command(sc, DRV_MSG_CODE_EEE_RESULTS_ACK, 0);
}

#define DRV_INFO_ETH_STAT_NUM_MACS_REQUIRED 3

static void bnx2x_drv_info_ether_stat(struct bnx2x_softc *sc)
{
        struct eth_stats_info *ether_stat = &sc->sp->drv_info_to_mcp.ether_stat;

        strncpy(ether_stat->version, BNX2X_DRIVER_VERSION,
                ETH_STAT_INFO_VERSION_LEN);

        sc->sp_objs[0].mac_obj.get_n_elements(sc, &sc->sp_objs[0].mac_obj,
                                              DRV_INFO_ETH_STAT_NUM_MACS_REQUIRED,
                                              ether_stat->mac_local + MAC_PAD,
                                              MAC_PAD, ETH_ALEN);

        ether_stat->mtu_size = sc->mtu;

        ether_stat->feature_flags |= FEATURE_ETH_CHKSUM_OFFLOAD_MASK;
        ether_stat->promiscuous_mode = 0;       // (flags & PROMISC) ? 1 : 0;

        ether_stat->txq_size = sc->tx_ring_size;
        ether_stat->rxq_size = sc->rx_ring_size;
}

static void bnx2x_handle_drv_info_req(struct bnx2x_softc *sc)
{
        enum drv_info_opcode op_code;
        uint32_t drv_info_ctl = SHMEM2_RD(sc, drv_info_control);

        /* if drv_info version supported by MFW doesn't match - send NACK */
        if ((drv_info_ctl & DRV_INFO_CONTROL_VER_MASK) != DRV_INFO_CUR_VER) {
                bnx2x_fw_command(sc, DRV_MSG_CODE_DRV_INFO_NACK, 0);
                return;
        }

        op_code = ((drv_info_ctl & DRV_INFO_CONTROL_OP_CODE_MASK) >>
                   DRV_INFO_CONTROL_OP_CODE_SHIFT);

        memset(&sc->sp->drv_info_to_mcp, 0, sizeof(union drv_info_to_mcp));

        switch (op_code) {
        case ETH_STATS_OPCODE:
                bnx2x_drv_info_ether_stat(sc);
                break;
        case FCOE_STATS_OPCODE:
        case ISCSI_STATS_OPCODE:
        default:
                /* if op code isn't supported - send NACK */
                bnx2x_fw_command(sc, DRV_MSG_CODE_DRV_INFO_NACK, 0);
                return;
        }

        /*
         * If we got drv_info attn from MFW then these fields are defined in
         * shmem2 for sure
         */
        SHMEM2_WR(sc, drv_info_host_addr_lo,
                  U64_LO(BNX2X_SP_MAPPING(sc, drv_info_to_mcp)));
        SHMEM2_WR(sc, drv_info_host_addr_hi,
                  U64_HI(BNX2X_SP_MAPPING(sc, drv_info_to_mcp)));

        bnx2x_fw_command(sc, DRV_MSG_CODE_DRV_INFO_ACK, 0);
}

static void bnx2x_dcc_event(struct bnx2x_softc *sc, uint32_t dcc_event)
{
        if (dcc_event & DRV_STATUS_DCC_DISABLE_ENABLE_PF) {
/*
 * This is the only place besides the function initialization
 * where the sc->flags can change so it is done without any
 * locks
 */
                if (sc->devinfo.
                    mf_info.mf_config[SC_VN(sc)] & FUNC_MF_CFG_FUNC_DISABLED) {
                        PMD_DRV_LOG(DEBUG, "mf_cfg function disabled");
                        sc->flags |= BNX2X_MF_FUNC_DIS;
                        bnx2x_e1h_disable(sc);
                } else {
                        PMD_DRV_LOG(DEBUG, "mf_cfg function enabled");
                        sc->flags &= ~BNX2X_MF_FUNC_DIS;
                        bnx2x_e1h_enable(sc);
                }
                dcc_event &= ~DRV_STATUS_DCC_DISABLE_ENABLE_PF;
        }

        if (dcc_event & DRV_STATUS_DCC_BANDWIDTH_ALLOCATION) {
                bnx2x_config_mf_bw(sc);
                dcc_event &= ~DRV_STATUS_DCC_BANDWIDTH_ALLOCATION;
        }

        /* Report results to MCP */
        if (dcc_event)
                bnx2x_fw_command(sc, DRV_MSG_CODE_DCC_FAILURE, 0);
        else
                bnx2x_fw_command(sc, DRV_MSG_CODE_DCC_OK, 0);
}

static void bnx2x_pmf_update(struct bnx2x_softc *sc)
{
        int port = SC_PORT(sc);
        uint32_t val;

        sc->port.pmf = 1;

        /*
         * We need the mb() to ensure the ordering between the writing to
         * sc->port.pmf here and reading it from the bnx2x_periodic_task().
         */
        mb();

        /* enable nig attention */
        val = (0xff0f | (1 << (SC_VN(sc) + 4)));
        if (sc->devinfo.int_block == INT_BLOCK_HC) {
                REG_WR(sc, HC_REG_TRAILING_EDGE_0 + port * 8, val);
                REG_WR(sc, HC_REG_LEADING_EDGE_0 + port * 8, val);
        } else if (!CHIP_IS_E1x(sc)) {
                REG_WR(sc, IGU_REG_TRAILING_EDGE_LATCH, val);
                REG_WR(sc, IGU_REG_LEADING_EDGE_LATCH, val);
        }

        bnx2x_stats_handle(sc, STATS_EVENT_PMF);
}

static int bnx2x_mc_assert(struct bnx2x_softc *sc)
{
        char last_idx;
        int i, rc = 0;
        __rte_unused uint32_t row0, row1, row2, row3;

        /* XSTORM */
        last_idx =
            REG_RD8(sc, BAR_XSTRORM_INTMEM + XSTORM_ASSERT_LIST_INDEX_OFFSET);
        if (last_idx)
                PMD_DRV_LOG(ERR, "XSTORM_ASSERT_LIST_INDEX 0x%x", last_idx);

        /* print the asserts */
        for (i = 0; i < STORM_ASSERT_ARRAY_SIZE; i++) {

                row0 =
                    REG_RD(sc,
                           BAR_XSTRORM_INTMEM + XSTORM_ASSERT_LIST_OFFSET(i));
                row1 =
                    REG_RD(sc,
                           BAR_XSTRORM_INTMEM + XSTORM_ASSERT_LIST_OFFSET(i) +
                           4);
                row2 =
                    REG_RD(sc,
                           BAR_XSTRORM_INTMEM + XSTORM_ASSERT_LIST_OFFSET(i) +
                           8);
                row3 =
                    REG_RD(sc,
                           BAR_XSTRORM_INTMEM + XSTORM_ASSERT_LIST_OFFSET(i) +
                           12);

                if (row0 != COMMON_ASM_INVALID_ASSERT_OPCODE) {
                        PMD_DRV_LOG(ERR,
                                    "XSTORM_ASSERT_INDEX 0x%x = 0x%08x 0x%08x 0x%08x 0x%08x",
                                    i, row3, row2, row1, row0);
                        rc++;
                } else {
                        break;
                }
        }

        /* TSTORM */
        last_idx =
            REG_RD8(sc, BAR_TSTRORM_INTMEM + TSTORM_ASSERT_LIST_INDEX_OFFSET);
        if (last_idx) {
                PMD_DRV_LOG(ERR, "TSTORM_ASSERT_LIST_INDEX 0x%x", last_idx);
        }

        /* print the asserts */
        for (i = 0; i < STORM_ASSERT_ARRAY_SIZE; i++) {

                row0 =
                    REG_RD(sc,
                           BAR_TSTRORM_INTMEM + TSTORM_ASSERT_LIST_OFFSET(i));
                row1 =
                    REG_RD(sc,
                           BAR_TSTRORM_INTMEM + TSTORM_ASSERT_LIST_OFFSET(i) +
                           4);
                row2 =
                    REG_RD(sc,
                           BAR_TSTRORM_INTMEM + TSTORM_ASSERT_LIST_OFFSET(i) +
                           8);
                row3 =
                    REG_RD(sc,
                           BAR_TSTRORM_INTMEM + TSTORM_ASSERT_LIST_OFFSET(i) +
                           12);

                if (row0 != COMMON_ASM_INVALID_ASSERT_OPCODE) {
                        PMD_DRV_LOG(ERR,
                                    "TSTORM_ASSERT_INDEX 0x%x = 0x%08x 0x%08x 0x%08x 0x%08x",
                                    i, row3, row2, row1, row0);
                        rc++;
                } else {
                        break;
                }
        }

        /* CSTORM */
        last_idx =
            REG_RD8(sc, BAR_CSTRORM_INTMEM + CSTORM_ASSERT_LIST_INDEX_OFFSET);
        if (last_idx) {
                PMD_DRV_LOG(ERR, "CSTORM_ASSERT_LIST_INDEX 0x%x", last_idx);
        }

        /* print the asserts */
        for (i = 0; i < STORM_ASSERT_ARRAY_SIZE; i++) {

                row0 =
                    REG_RD(sc,
                           BAR_CSTRORM_INTMEM + CSTORM_ASSERT_LIST_OFFSET(i));
                row1 =
                    REG_RD(sc,
                           BAR_CSTRORM_INTMEM + CSTORM_ASSERT_LIST_OFFSET(i) +
                           4);
                row2 =
                    REG_RD(sc,
                           BAR_CSTRORM_INTMEM + CSTORM_ASSERT_LIST_OFFSET(i) +
                           8);
                row3 =
                    REG_RD(sc,
                           BAR_CSTRORM_INTMEM + CSTORM_ASSERT_LIST_OFFSET(i) +
                           12);

                if (row0 != COMMON_ASM_INVALID_ASSERT_OPCODE) {
                        PMD_DRV_LOG(ERR,
                                    "CSTORM_ASSERT_INDEX 0x%x = 0x%08x 0x%08x 0x%08x 0x%08x",
                                    i, row3, row2, row1, row0);
                        rc++;
                } else {
                        break;
                }
        }

        /* USTORM */
        last_idx =
            REG_RD8(sc, BAR_USTRORM_INTMEM + USTORM_ASSERT_LIST_INDEX_OFFSET);
        if (last_idx) {
                PMD_DRV_LOG(ERR, "USTORM_ASSERT_LIST_INDEX 0x%x", last_idx);
        }

        /* print the asserts */
        for (i = 0; i < STORM_ASSERT_ARRAY_SIZE; i++) {

                row0 =
                    REG_RD(sc,
                           BAR_USTRORM_INTMEM + USTORM_ASSERT_LIST_OFFSET(i));
                row1 =
                    REG_RD(sc,
                           BAR_USTRORM_INTMEM + USTORM_ASSERT_LIST_OFFSET(i) +
                           4);
                row2 =
                    REG_RD(sc,
                           BAR_USTRORM_INTMEM + USTORM_ASSERT_LIST_OFFSET(i) +
                           8);
                row3 =
                    REG_RD(sc,
                           BAR_USTRORM_INTMEM + USTORM_ASSERT_LIST_OFFSET(i) +
                           12);

                if (row0 != COMMON_ASM_INVALID_ASSERT_OPCODE) {
                        PMD_DRV_LOG(ERR,
                                    "USTORM_ASSERT_INDEX 0x%x = 0x%08x 0x%08x 0x%08x 0x%08x",
                                    i, row3, row2, row1, row0);
                        rc++;
                } else {
                        break;
                }
        }

        return rc;
}

static void bnx2x_attn_int_deasserted3(struct bnx2x_softc *sc, uint32_t attn)
{
        int func = SC_FUNC(sc);
        uint32_t val;

        if (attn & EVEREST_GEN_ATTN_IN_USE_MASK) {

                if (attn & BNX2X_PMF_LINK_ASSERT(sc)) {

                        REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_12 + func * 4, 0);
                        bnx2x_read_mf_cfg(sc);
                        sc->devinfo.mf_info.mf_config[SC_VN(sc)] =
                            MFCFG_RD(sc,
                                     func_mf_config[SC_ABS_FUNC(sc)].config);
                        val =
                            SHMEM_RD(sc, func_mb[SC_FW_MB_IDX(sc)].drv_status);

                        if (val & DRV_STATUS_DCC_EVENT_MASK)
                                bnx2x_dcc_event(sc,
                                              (val &
                                               DRV_STATUS_DCC_EVENT_MASK));

                        if (val & DRV_STATUS_SET_MF_BW)
                                bnx2x_set_mf_bw(sc);

                        if (val & DRV_STATUS_DRV_INFO_REQ)
                                bnx2x_handle_drv_info_req(sc);

                        if ((sc->port.pmf == 0) && (val & DRV_STATUS_PMF))
                                bnx2x_pmf_update(sc);

                        if (val & DRV_STATUS_EEE_NEGOTIATION_RESULTS)
                                bnx2x_handle_eee_event(sc);

                        if (sc->link_vars.periodic_flags &
                            ELINK_PERIODIC_FLAGS_LINK_EVENT) {
                                /* sync with link */
                                sc->link_vars.periodic_flags &=
                                    ~ELINK_PERIODIC_FLAGS_LINK_EVENT;
                                if (IS_MF(sc)) {
                                        bnx2x_link_sync_notify(sc);
                                }
                                bnx2x_link_report(sc);
                        }

                        /*
                         * Always call it here: bnx2x_link_report() will
                         * prevent the link indication duplication.
                         */
                        bnx2x_link_status_update(sc);

                } else if (attn & BNX2X_MC_ASSERT_BITS) {

                        PMD_DRV_LOG(ERR, "MC assert!");
                        bnx2x_mc_assert(sc);
                        REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_10, 0);
                        REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_9, 0);
                        REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_8, 0);
                        REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_7, 0);
                        rte_panic("MC assert!");

                } else if (attn & BNX2X_MCP_ASSERT) {

                        PMD_DRV_LOG(ERR, "MCP assert!");
                        REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_11, 0);

                } else {
                        PMD_DRV_LOG(ERR,
                                    "Unknown HW assert! (attn 0x%08x)", attn);
                }
        }

        if (attn & EVEREST_LATCHED_ATTN_IN_USE_MASK) {
                PMD_DRV_LOG(ERR, "LATCHED attention 0x%08x (masked)", attn);
                if (attn & BNX2X_GRC_TIMEOUT) {
                        val = REG_RD(sc, MISC_REG_GRC_TIMEOUT_ATTN);
                        PMD_DRV_LOG(ERR, "GRC time-out 0x%08x", val);
                }
                if (attn & BNX2X_GRC_RSV) {
                        val = REG_RD(sc, MISC_REG_GRC_RSV_ATTN);
                        PMD_DRV_LOG(ERR, "GRC reserved 0x%08x", val);
                }
                REG_WR(sc, MISC_REG_AEU_CLR_LATCH_SIGNAL, 0x7ff);
        }
}

static void bnx2x_attn_int_deasserted2(struct bnx2x_softc *sc, uint32_t attn)
{
        int port = SC_PORT(sc);
        int reg_offset;
        uint32_t val0, mask0, val1, mask1;
        uint32_t val;

        if (attn & AEU_INPUTS_ATTN_BITS_CFC_HW_INTERRUPT) {
                val = REG_RD(sc, CFC_REG_CFC_INT_STS_CLR);
                PMD_DRV_LOG(ERR, "CFC hw attention 0x%08x", val);
/* CFC error attention */
                if (val & 0x2) {
                        PMD_DRV_LOG(ERR, "FATAL error from CFC");
                }
        }

        if (attn & AEU_INPUTS_ATTN_BITS_PXP_HW_INTERRUPT) {
                val = REG_RD(sc, PXP_REG_PXP_INT_STS_CLR_0);
                PMD_DRV_LOG(ERR, "PXP hw attention-0 0x%08x", val);
/* RQ_USDMDP_FIFO_OVERFLOW */
                if (val & 0x18000) {
                        PMD_DRV_LOG(ERR, "FATAL error from PXP");
                }

                if (!CHIP_IS_E1x(sc)) {
                        val = REG_RD(sc, PXP_REG_PXP_INT_STS_CLR_1);
                        PMD_DRV_LOG(ERR, "PXP hw attention-1 0x%08x", val);
                }
        }
#define PXP2_EOP_ERROR_BIT  PXP2_PXP2_INT_STS_CLR_0_REG_WR_PGLUE_EOP_ERROR
#define AEU_PXP2_HW_INT_BIT AEU_INPUTS_ATTN_BITS_PXPPCICLOCKCLIENT_HW_INTERRUPT

        if (attn & AEU_PXP2_HW_INT_BIT) {
/*  CQ47854 workaround do not panic on
 *  PXP2_PXP2_INT_STS_0_REG_WR_PGLUE_EOP_ERROR
 */
                if (!CHIP_IS_E1x(sc)) {
                        mask0 = REG_RD(sc, PXP2_REG_PXP2_INT_MASK_0);
                        val1 = REG_RD(sc, PXP2_REG_PXP2_INT_STS_1);
                        mask1 = REG_RD(sc, PXP2_REG_PXP2_INT_MASK_1);
                        val0 = REG_RD(sc, PXP2_REG_PXP2_INT_STS_0);
                        /*
                         * If the only PXP2_EOP_ERROR_BIT is set in
                         * STS0 and STS1 - clear it
                         *
                         * probably we lose additional attentions between
                         * STS0 and STS_CLR0, in this case user will not
                         * be notified about them
                         */
                        if (val0 & mask0 & PXP2_EOP_ERROR_BIT &&
                            !(val1 & mask1))
                                val0 = REG_RD(sc, PXP2_REG_PXP2_INT_STS_CLR_0);

                        /* print the register, since no one can restore it */
                        PMD_DRV_LOG(ERR,
                                    "PXP2_REG_PXP2_INT_STS_CLR_0 0x%08x", val0);

                        /*
                         * if PXP2_PXP2_INT_STS_0_REG_WR_PGLUE_EOP_ERROR
                         * then notify
                         */
                        if (val0 & PXP2_EOP_ERROR_BIT) {
                                PMD_DRV_LOG(ERR, "PXP2_WR_PGLUE_EOP_ERROR");

                                /*
                                 * if only PXP2_PXP2_INT_STS_0_REG_WR_PGLUE_EOP_ERROR is
                                 * set then clear attention from PXP2 block without panic
                                 */
                                if (((val0 & mask0) == PXP2_EOP_ERROR_BIT) &&
                                    ((val1 & mask1) == 0))
                                        attn &= ~AEU_PXP2_HW_INT_BIT;
                        }
                }
        }

        if (attn & HW_INTERRUT_ASSERT_SET_2) {
                reg_offset = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_2 :
                              MISC_REG_AEU_ENABLE1_FUNC_0_OUT_2);

                val = REG_RD(sc, reg_offset);
                val &= ~(attn & HW_INTERRUT_ASSERT_SET_2);
                REG_WR(sc, reg_offset, val);

                PMD_DRV_LOG(ERR,
                            "FATAL HW block attention set2 0x%x",
                            (uint32_t) (attn & HW_INTERRUT_ASSERT_SET_2));
                rte_panic("HW block attention set2");
        }
}

static void bnx2x_attn_int_deasserted1(struct bnx2x_softc *sc, uint32_t attn)
{
        int port = SC_PORT(sc);
        int reg_offset;
        uint32_t val;

        if (attn & AEU_INPUTS_ATTN_BITS_DOORBELLQ_HW_INTERRUPT) {
                val = REG_RD(sc, DORQ_REG_DORQ_INT_STS_CLR);
                PMD_DRV_LOG(ERR, "DB hw attention 0x%08x", val);
/* DORQ discard attention */
                if (val & 0x2) {
                        PMD_DRV_LOG(ERR, "FATAL error from DORQ");
                }
        }

        if (attn & HW_INTERRUT_ASSERT_SET_1) {
                reg_offset = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_1 :
                              MISC_REG_AEU_ENABLE1_FUNC_0_OUT_1);

                val = REG_RD(sc, reg_offset);
                val &= ~(attn & HW_INTERRUT_ASSERT_SET_1);
                REG_WR(sc, reg_offset, val);

                PMD_DRV_LOG(ERR,
                            "FATAL HW block attention set1 0x%08x",
                            (uint32_t) (attn & HW_INTERRUT_ASSERT_SET_1));
                rte_panic("HW block attention set1");
        }
}

static void bnx2x_attn_int_deasserted0(struct bnx2x_softc *sc, uint32_t attn)
{
        int port = SC_PORT(sc);
        int reg_offset;
        uint32_t val;

        reg_offset = (port) ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 :
            MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0;

        if (attn & AEU_INPUTS_ATTN_BITS_SPIO5) {
                val = REG_RD(sc, reg_offset);
                val &= ~AEU_INPUTS_ATTN_BITS_SPIO5;
                REG_WR(sc, reg_offset, val);

                PMD_DRV_LOG(WARNING, "SPIO5 hw attention");

/* Fan failure attention */
                elink_hw_reset_phy(&sc->link_params);
                bnx2x_fan_failure(sc);
        }

        if ((attn & sc->link_vars.aeu_int_mask) && sc->port.pmf) {
                elink_handle_module_detect_int(&sc->link_params);
        }

        if (attn & HW_INTERRUT_ASSERT_SET_0) {
                val = REG_RD(sc, reg_offset);
                val &= ~(attn & HW_INTERRUT_ASSERT_SET_0);
                REG_WR(sc, reg_offset, val);

                rte_panic("FATAL HW block attention set0 0x%lx",
                          (attn & HW_INTERRUT_ASSERT_SET_0));
        }
}

static void bnx2x_attn_int_deasserted(struct bnx2x_softc *sc, uint32_t deasserted)
{
        struct attn_route attn;
        struct attn_route *group_mask;
        int port = SC_PORT(sc);
        int index;
        uint32_t reg_addr;
        uint32_t val;
        uint32_t aeu_mask;
        uint8_t global = FALSE;

        /*
         * Need to take HW lock because MCP or other port might also
         * try to handle this event.
         */
        bnx2x_acquire_alr(sc);

        if (bnx2x_chk_parity_attn(sc, &global, TRUE)) {
                sc->recovery_state = BNX2X_RECOVERY_INIT;

/* disable HW interrupts */
                bnx2x_int_disable(sc);
                bnx2x_release_alr(sc);
                return;
        }

        attn.sig[0] = REG_RD(sc, MISC_REG_AEU_AFTER_INVERT_1_FUNC_0 + port * 4);
        attn.sig[1] = REG_RD(sc, MISC_REG_AEU_AFTER_INVERT_2_FUNC_0 + port * 4);
        attn.sig[2] = REG_RD(sc, MISC_REG_AEU_AFTER_INVERT_3_FUNC_0 + port * 4);
        attn.sig[3] = REG_RD(sc, MISC_REG_AEU_AFTER_INVERT_4_FUNC_0 + port * 4);
        if (!CHIP_IS_E1x(sc)) {
                attn.sig[4] =
                    REG_RD(sc, MISC_REG_AEU_AFTER_INVERT_5_FUNC_0 + port * 4);
        } else {
                attn.sig[4] = 0;
        }

        for (index = 0; index < MAX_DYNAMIC_ATTN_GRPS; index++) {
                if (deasserted & (1 << index)) {
                        group_mask = &sc->attn_group[index];

                        bnx2x_attn_int_deasserted4(sc,
                                                 attn.
                                                 sig[4] & group_mask->sig[4]);
                        bnx2x_attn_int_deasserted3(sc,
                                                 attn.
                                                 sig[3] & group_mask->sig[3]);
                        bnx2x_attn_int_deasserted1(sc,
                                                 attn.
                                                 sig[1] & group_mask->sig[1]);
                        bnx2x_attn_int_deasserted2(sc,
                                                 attn.
                                                 sig[2] & group_mask->sig[2]);
                        bnx2x_attn_int_deasserted0(sc,
                                                 attn.
                                                 sig[0] & group_mask->sig[0]);
                }
        }

        bnx2x_release_alr(sc);

        if (sc->devinfo.int_block == INT_BLOCK_HC) {
                reg_addr = (HC_REG_COMMAND_REG + port * 32 +
                            COMMAND_REG_ATTN_BITS_CLR);
        } else {
                reg_addr = (BAR_IGU_INTMEM + IGU_CMD_ATTN_BIT_CLR_UPPER * 8);
        }

        val = ~deasserted;
        PMD_DRV_LOG(DEBUG,
                    "about to mask 0x%08x at %s addr 0x%08x", val,
                    (sc->devinfo.int_block == INT_BLOCK_HC) ? "HC" : "IGU",
                    reg_addr);
        REG_WR(sc, reg_addr, val);

        if (~sc->attn_state & deasserted) {
                PMD_DRV_LOG(ERR, "IGU error");
        }

        reg_addr = port ? MISC_REG_AEU_MASK_ATTN_FUNC_1 :
            MISC_REG_AEU_MASK_ATTN_FUNC_0;

        bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port);

        aeu_mask = REG_RD(sc, reg_addr);

        aeu_mask |= (deasserted & 0x3ff);

        REG_WR(sc, reg_addr, aeu_mask);
        bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port);

        sc->attn_state &= ~deasserted;
}

static void bnx2x_attn_int(struct bnx2x_softc *sc)
{
        /* read local copy of bits */
        uint32_t attn_bits = le32toh(sc->def_sb->atten_status_block.attn_bits);
        uint32_t attn_ack =
            le32toh(sc->def_sb->atten_status_block.attn_bits_ack);
        uint32_t attn_state = sc->attn_state;

        /* look for changed bits */
        uint32_t asserted = attn_bits & ~attn_ack & ~attn_state;
        uint32_t deasserted = ~attn_bits & attn_ack & attn_state;

        PMD_DRV_LOG(DEBUG,
                    "attn_bits 0x%08x attn_ack 0x%08x asserted 0x%08x deasserted 0x%08x",
                    attn_bits, attn_ack, asserted, deasserted);

        if (~(attn_bits ^ attn_ack) & (attn_bits ^ attn_state)) {
                PMD_DRV_LOG(ERR, "BAD attention state");
        }

        /* handle bits that were raised */
        if (asserted) {
                bnx2x_attn_int_asserted(sc, asserted);
        }

        if (deasserted) {
                bnx2x_attn_int_deasserted(sc, deasserted);
        }
}

static uint16_t bnx2x_update_dsb_idx(struct bnx2x_softc *sc)
{
        struct host_sp_status_block *def_sb = sc->def_sb;
        uint16_t rc = 0;

        mb();                   /* status block is written to by the chip */

        if (sc->def_att_idx != def_sb->atten_status_block.attn_bits_index) {
                sc->def_att_idx = def_sb->atten_status_block.attn_bits_index;
                rc |= BNX2X_DEF_SB_ATT_IDX;
        }

        if (sc->def_idx != def_sb->sp_sb.running_index) {
                sc->def_idx = def_sb->sp_sb.running_index;
                rc |= BNX2X_DEF_SB_IDX;
        }

        mb();

        return rc;
}

static struct ecore_queue_sp_obj *bnx2x_cid_to_q_obj(struct bnx2x_softc *sc,
                                                          uint32_t cid)
{
        return &sc->sp_objs[CID_TO_FP(cid, sc)].q_obj;
}

static void bnx2x_handle_mcast_eqe(struct bnx2x_softc *sc)
{
        struct ecore_mcast_ramrod_params rparam;
        int rc;

        memset(&rparam, 0, sizeof(rparam));

        rparam.mcast_obj = &sc->mcast_obj;

        /* clear pending state for the last command */
        sc->mcast_obj.raw.clear_pending(&sc->mcast_obj.raw);

        /* if there are pending mcast commands - send them */
        if (sc->mcast_obj.check_pending(&sc->mcast_obj)) {
                rc = ecore_config_mcast(sc, &rparam, ECORE_MCAST_CMD_CONT);
                if (rc < 0) {
                        PMD_DRV_LOG(INFO,
                                    "Failed to send pending mcast commands (%d)",
                                    rc);
                }
        }
}

static void
bnx2x_handle_classification_eqe(struct bnx2x_softc *sc, union event_ring_elem *elem)
{
        unsigned long ramrod_flags = 0;
        int rc = 0;
        uint32_t cid = elem->message.data.eth_event.echo & BNX2X_SWCID_MASK;
        struct ecore_vlan_mac_obj *vlan_mac_obj;

        /* always push next commands out, don't wait here */
        bnx2x_set_bit(RAMROD_CONT, &ramrod_flags);

        switch (le32toh(elem->message.data.eth_event.echo) >> BNX2X_SWCID_SHIFT) {
        case ECORE_FILTER_MAC_PENDING:
                PMD_DRV_LOG(DEBUG, "Got SETUP_MAC completions");
                vlan_mac_obj = &sc->sp_objs[cid].mac_obj;
                break;

        case ECORE_FILTER_MCAST_PENDING:
                PMD_DRV_LOG(DEBUG, "Got SETUP_MCAST completions");
                bnx2x_handle_mcast_eqe(sc);
                return;

        default:
                PMD_DRV_LOG(NOTICE, "Unsupported classification command: %d",
                            elem->message.data.eth_event.echo);
                return;
        }

        rc = vlan_mac_obj->complete(sc, vlan_mac_obj, elem, &ramrod_flags);

        if (rc < 0) {
                PMD_DRV_LOG(NOTICE, "Failed to schedule new commands (%d)", rc);
        } else if (rc > 0) {
                PMD_DRV_LOG(DEBUG, "Scheduled next pending commands...");
        }
}

static void bnx2x_handle_rx_mode_eqe(struct bnx2x_softc *sc)
{
        bnx2x_clear_bit(ECORE_FILTER_RX_MODE_PENDING, &sc->sp_state);

        /* send rx_mode command again if was requested */
        if (bnx2x_test_and_clear_bit(ECORE_FILTER_RX_MODE_SCHED, &sc->sp_state)) {
                bnx2x_set_storm_rx_mode(sc);
        }
}

static void bnx2x_update_eq_prod(struct bnx2x_softc *sc, uint16_t prod)
{
        storm_memset_eq_prod(sc, prod, SC_FUNC(sc));
        wmb();                  /* keep prod updates ordered */
}

static void bnx2x_eq_int(struct bnx2x_softc *sc)
{
        uint16_t hw_cons, sw_cons, sw_prod;
        union event_ring_elem *elem;
        uint8_t echo;
        uint32_t cid;
        uint8_t opcode;
        int spqe_cnt = 0;
        struct ecore_queue_sp_obj *q_obj;
        struct ecore_func_sp_obj *f_obj = &sc->func_obj;
        struct ecore_raw_obj *rss_raw = &sc->rss_conf_obj.raw;

        hw_cons = le16toh(*sc->eq_cons_sb);

        /*
         * The hw_cons range is 1-255, 257 - the sw_cons range is 0-254, 256.
         * when we get to the next-page we need to adjust so the loop
         * condition below will be met. The next element is the size of a
         * regular element and hence incrementing by 1
         */
        if ((hw_cons & EQ_DESC_MAX_PAGE) == EQ_DESC_MAX_PAGE) {
                hw_cons++;
        }

        /*
         * This function may never run in parallel with itself for a
         * specific sc and no need for a read memory barrier here.
         */
        sw_cons = sc->eq_cons;
        sw_prod = sc->eq_prod;

        for (;
             sw_cons != hw_cons;
             sw_prod = NEXT_EQ_IDX(sw_prod), sw_cons = NEXT_EQ_IDX(sw_cons)) {

                elem = &sc->eq[EQ_DESC(sw_cons)];

/* elem CID originates from FW, actually LE */
                cid = SW_CID(elem->message.data.cfc_del_event.cid);
                opcode = elem->message.opcode;

/* handle eq element */
                switch (opcode) {
                case EVENT_RING_OPCODE_STAT_QUERY:
                        PMD_DEBUG_PERIODIC_LOG(DEBUG, "got statistics completion event %d",
                                    sc->stats_comp++);
                        /* nothing to do with stats comp */
                        goto next_spqe;

                case EVENT_RING_OPCODE_CFC_DEL:
                        /* handle according to cid range */
                        /* we may want to verify here that the sc state is HALTING */
                        PMD_DRV_LOG(DEBUG, "got delete ramrod for MULTI[%d]",
                                    cid);
                        q_obj = bnx2x_cid_to_q_obj(sc, cid);
                        if (q_obj->complete_cmd(sc, q_obj, ECORE_Q_CMD_CFC_DEL)) {
                                break;
                        }
                        goto next_spqe;

                case EVENT_RING_OPCODE_STOP_TRAFFIC:
                        PMD_DRV_LOG(DEBUG, "got STOP TRAFFIC");
                        if (f_obj->complete_cmd(sc, f_obj, ECORE_F_CMD_TX_STOP)) {
                                break;
                        }
                        goto next_spqe;

                case EVENT_RING_OPCODE_START_TRAFFIC:
                        PMD_DRV_LOG(DEBUG, "got START TRAFFIC");
                        if (f_obj->complete_cmd
                            (sc, f_obj, ECORE_F_CMD_TX_START)) {
                                break;
                        }
                        goto next_spqe;

                case EVENT_RING_OPCODE_FUNCTION_UPDATE:
                        echo = elem->message.data.function_update_event.echo;
                        if (echo == SWITCH_UPDATE) {
                                PMD_DRV_LOG(DEBUG,
                                            "got FUNC_SWITCH_UPDATE ramrod");
                                if (f_obj->complete_cmd(sc, f_obj,
                                                        ECORE_F_CMD_SWITCH_UPDATE))
                                {
                                        break;
                                }
                        } else {
                                PMD_DRV_LOG(DEBUG,
                                            "AFEX: ramrod completed FUNCTION_UPDATE");
                                f_obj->complete_cmd(sc, f_obj,
                                                    ECORE_F_CMD_AFEX_UPDATE);
                        }
                        goto next_spqe;

                case EVENT_RING_OPCODE_FORWARD_SETUP:
                        q_obj = &bnx2x_fwd_sp_obj(sc, q_obj);
                        if (q_obj->complete_cmd(sc, q_obj,
                                                ECORE_Q_CMD_SETUP_TX_ONLY)) {
                                break;
                        }
                        goto next_spqe;

                case EVENT_RING_OPCODE_FUNCTION_START:
                        PMD_DRV_LOG(DEBUG, "got FUNC_START ramrod");
                        if (f_obj->complete_cmd(sc, f_obj, ECORE_F_CMD_START)) {
                                break;
                        }
                        goto next_spqe;

                case EVENT_RING_OPCODE_FUNCTION_STOP:
                        PMD_DRV_LOG(DEBUG, "got FUNC_STOP ramrod");
                        if (f_obj->complete_cmd(sc, f_obj, ECORE_F_CMD_STOP)) {
                                break;
                        }
                        goto next_spqe;
                }

                switch (opcode | sc->state) {
                case (EVENT_RING_OPCODE_RSS_UPDATE_RULES | BNX2X_STATE_OPEN):
                case (EVENT_RING_OPCODE_RSS_UPDATE_RULES | BNX2X_STATE_OPENING_WAITING_PORT):
                        cid =
                            elem->message.data.eth_event.echo & BNX2X_SWCID_MASK;
                        PMD_DRV_LOG(DEBUG, "got RSS_UPDATE ramrod. CID %d",
                                    cid);
                        rss_raw->clear_pending(rss_raw);
                        break;

                case (EVENT_RING_OPCODE_SET_MAC | BNX2X_STATE_OPEN):
                case (EVENT_RING_OPCODE_SET_MAC | BNX2X_STATE_DIAG):
                case (EVENT_RING_OPCODE_SET_MAC | BNX2X_STATE_CLOSING_WAITING_HALT):
                case (EVENT_RING_OPCODE_CLASSIFICATION_RULES | BNX2X_STATE_OPEN):
                case (EVENT_RING_OPCODE_CLASSIFICATION_RULES | BNX2X_STATE_DIAG):
                case (EVENT_RING_OPCODE_CLASSIFICATION_RULES | BNX2X_STATE_CLOSING_WAITING_HALT):
                        PMD_DRV_LOG(DEBUG,
                                    "got (un)set mac ramrod");
                        bnx2x_handle_classification_eqe(sc, elem);
                        break;

                case (EVENT_RING_OPCODE_MULTICAST_RULES | BNX2X_STATE_OPEN):
                case (EVENT_RING_OPCODE_MULTICAST_RULES | BNX2X_STATE_DIAG):
                case (EVENT_RING_OPCODE_MULTICAST_RULES | BNX2X_STATE_CLOSING_WAITING_HALT):
                        PMD_DRV_LOG(DEBUG,
                                    "got mcast ramrod");
                        bnx2x_handle_mcast_eqe(sc);
                        break;

                case (EVENT_RING_OPCODE_FILTERS_RULES | BNX2X_STATE_OPEN):
                case (EVENT_RING_OPCODE_FILTERS_RULES | BNX2X_STATE_DIAG):
                case (EVENT_RING_OPCODE_FILTERS_RULES | BNX2X_STATE_CLOSING_WAITING_HALT):
                        PMD_DRV_LOG(DEBUG,
                                    "got rx_mode ramrod");
                        bnx2x_handle_rx_mode_eqe(sc);
                        break;

                default:
                        /* unknown event log error and continue */
                        PMD_DRV_LOG(INFO, "Unknown EQ event %d, sc->state 0x%x",
                                    elem->message.opcode, sc->state);
                }

next_spqe:
                spqe_cnt++;
        }                       /* for */

        mb();
        atomic_add_acq_long(&sc->eq_spq_left, spqe_cnt);

        sc->eq_cons = sw_cons;
        sc->eq_prod = sw_prod;

        /* make sure that above mem writes were issued towards the memory */
        wmb();

        /* update producer */
        bnx2x_update_eq_prod(sc, sc->eq_prod);
}

static int bnx2x_handle_sp_tq(struct bnx2x_softc *sc)
{
        uint16_t status;
        int rc = 0;

        /* what work needs to be performed? */
        status = bnx2x_update_dsb_idx(sc);

        /* HW attentions */
        if (status & BNX2X_DEF_SB_ATT_IDX) {
                PMD_DRV_LOG(DEBUG, "---> ATTN INTR <---");
                bnx2x_attn_int(sc);
                status &= ~BNX2X_DEF_SB_ATT_IDX;
                rc = 1;
        }

        /* SP events: STAT_QUERY and others */
        if (status & BNX2X_DEF_SB_IDX) {
/* handle EQ completions */
                PMD_DEBUG_PERIODIC_LOG(DEBUG, "---> EQ INTR <---");
                bnx2x_eq_int(sc);
                bnx2x_ack_sb(sc, sc->igu_dsb_id, USTORM_ID,
                           le16toh(sc->def_idx), IGU_INT_NOP, 1);
                status &= ~BNX2X_DEF_SB_IDX;
        }

        /* if status is non zero then something went wrong */
        if (unlikely(status)) {
                PMD_DRV_LOG(INFO,
                            "Got an unknown SP interrupt! (0x%04x)", status);
        }

        /* ack status block only if something was actually handled */
        bnx2x_ack_sb(sc, sc->igu_dsb_id, ATTENTION_ID,
                   le16toh(sc->def_att_idx), IGU_INT_ENABLE, 1);

        return rc;
}

static void bnx2x_handle_fp_tq(struct bnx2x_fastpath *fp, int scan_fp)
{
        struct bnx2x_softc *sc = fp->sc;
        uint8_t more_rx = FALSE;

        PMD_DRV_LOG(DEBUG, "---> FP TASK QUEUE (%d) <--", fp->index);

        /* update the fastpath index */
        bnx2x_update_fp_sb_idx(fp);

        if (scan_fp) {
                if (bnx2x_has_rx_work(fp)) {
                        more_rx = bnx2x_rxeof(sc, fp);
                }

                if (more_rx) {
                        /* still more work to do */
                        bnx2x_handle_fp_tq(fp, scan_fp);
                        return;
                }
        }

        bnx2x_ack_sb(sc, fp->igu_sb_id, USTORM_ID,
                   le16toh(fp->fp_hc_idx), IGU_INT_ENABLE, 1);
}

/*
 * Legacy interrupt entry point.
 *
 * Verifies that the controller generated the interrupt and
 * then calls a separate routine to handle the various
 * interrupt causes: link, RX, and TX.
 */
int bnx2x_intr_legacy(struct bnx2x_softc *sc, int scan_fp)
{
        struct bnx2x_fastpath *fp;
        uint32_t status, mask;
        int i, rc = 0;

        /*
         * 0 for ustorm, 1 for cstorm
         * the bits returned from ack_int() are 0-15
         * bit 0 = attention status block
         * bit 1 = fast path status block
         * a mask of 0x2 or more = tx/rx event
         * a mask of 1 = slow path event
         */

        status = bnx2x_ack_int(sc);

        /* the interrupt is not for us */
        if (unlikely(status == 0)) {
                return 0;
        }

        PMD_DEBUG_PERIODIC_LOG(DEBUG, "Interrupt status 0x%04x", status);
        //bnx2x_dump_status_block(sc);

        FOR_EACH_ETH_QUEUE(sc, i) {
                fp = &sc->fp[i];
                mask = (0x2 << (fp->index + CNIC_SUPPORT(sc)));
                if (status & mask) {
                        bnx2x_handle_fp_tq(fp, scan_fp);
                        status &= ~mask;
                }
        }

        if (unlikely(status & 0x1)) {
                rc = bnx2x_handle_sp_tq(sc);
                status &= ~0x1;
        }

        if (unlikely(status)) {
                PMD_DRV_LOG(WARNING,
                            "Unexpected fastpath status (0x%08x)!", status);
        }

        return rc;
}

static int bnx2x_init_hw_common_chip(struct bnx2x_softc *sc);
static int bnx2x_init_hw_common(struct bnx2x_softc *sc);
static int bnx2x_init_hw_port(struct bnx2x_softc *sc);
static int bnx2x_init_hw_func(struct bnx2x_softc *sc);
static void bnx2x_reset_common(struct bnx2x_softc *sc);
static void bnx2x_reset_port(struct bnx2x_softc *sc);
static void bnx2x_reset_func(struct bnx2x_softc *sc);
static int bnx2x_init_firmware(struct bnx2x_softc *sc);
static void bnx2x_release_firmware(struct bnx2x_softc *sc);

static struct
ecore_func_sp_drv_ops bnx2x_func_sp_drv = {
        .init_hw_cmn_chip = bnx2x_init_hw_common_chip,
        .init_hw_cmn = bnx2x_init_hw_common,
        .init_hw_port = bnx2x_init_hw_port,
        .init_hw_func = bnx2x_init_hw_func,

        .reset_hw_cmn = bnx2x_reset_common,
        .reset_hw_port = bnx2x_reset_port,
        .reset_hw_func = bnx2x_reset_func,

        .init_fw = bnx2x_init_firmware,
        .release_fw = bnx2x_release_firmware,
};

static void bnx2x_init_func_obj(struct bnx2x_softc *sc)
{
        sc->dmae_ready = 0;

        PMD_INIT_FUNC_TRACE();

        ecore_init_func_obj(sc,
                            &sc->func_obj,
                            BNX2X_SP(sc, func_rdata),
                            (rte_iova_t)BNX2X_SP_MAPPING(sc, func_rdata),
                            BNX2X_SP(sc, func_afex_rdata),
                            (rte_iova_t)BNX2X_SP_MAPPING(sc, func_afex_rdata),
                            &bnx2x_func_sp_drv);
}

static int bnx2x_init_hw(struct bnx2x_softc *sc, uint32_t load_code)
{
        struct ecore_func_state_params func_params = { NULL };
        int rc;

        PMD_INIT_FUNC_TRACE();

        /* prepare the parameters for function state transitions */
        bnx2x_set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags);

        func_params.f_obj = &sc->func_obj;
        func_params.cmd = ECORE_F_CMD_HW_INIT;

        func_params.params.hw_init.load_phase = load_code;

        /*
         * Via a plethora of function pointers, we will eventually reach
         * bnx2x_init_hw_common(), bnx2x_init_hw_port(), or bnx2x_init_hw_func().
         */
        rc = ecore_func_state_change(sc, &func_params);

        return rc;
}

static void
bnx2x_fill(struct bnx2x_softc *sc, uint32_t addr, int fill, uint32_t len)
{
        uint32_t i;

        if (!(len % 4) && !(addr % 4)) {
                for (i = 0; i < len; i += 4) {
                        REG_WR(sc, (addr + i), fill);
                }
        } else {
                for (i = 0; i < len; i++) {
                        REG_WR8(sc, (addr + i), fill);
                }
        }
}

/* writes FP SP data to FW - data_size in dwords */
static void
bnx2x_wr_fp_sb_data(struct bnx2x_softc *sc, int fw_sb_id, uint32_t * sb_data_p,
                  uint32_t data_size)
{
        uint32_t index;

        for (index = 0; index < data_size; index++) {
                REG_WR(sc,
                       (BAR_CSTRORM_INTMEM +
                        CSTORM_STATUS_BLOCK_DATA_OFFSET(fw_sb_id) +
                        (sizeof(uint32_t) * index)), *(sb_data_p + index));
        }
}

static void bnx2x_zero_fp_sb(struct bnx2x_softc *sc, int fw_sb_id)
{
        struct hc_status_block_data_e2 sb_data_e2;
        struct hc_status_block_data_e1x sb_data_e1x;
        uint32_t *sb_data_p;
        uint32_t data_size = 0;

        if (!CHIP_IS_E1x(sc)) {
                memset(&sb_data_e2, 0, sizeof(struct hc_status_block_data_e2));
                sb_data_e2.common.state = SB_DISABLED;
                sb_data_e2.common.p_func.vf_valid = FALSE;
                sb_data_p = (uint32_t *) & sb_data_e2;
                data_size = (sizeof(struct hc_status_block_data_e2) /
                             sizeof(uint32_t));
        } else {
                memset(&sb_data_e1x, 0,
                       sizeof(struct hc_status_block_data_e1x));
                sb_data_e1x.common.state = SB_DISABLED;
                sb_data_e1x.common.p_func.vf_valid = FALSE;
                sb_data_p = (uint32_t *) & sb_data_e1x;
                data_size = (sizeof(struct hc_status_block_data_e1x) /
                             sizeof(uint32_t));
        }

        bnx2x_wr_fp_sb_data(sc, fw_sb_id, sb_data_p, data_size);

        bnx2x_fill(sc,
                 (BAR_CSTRORM_INTMEM + CSTORM_STATUS_BLOCK_OFFSET(fw_sb_id)), 0,
                 CSTORM_STATUS_BLOCK_SIZE);
        bnx2x_fill(sc, (BAR_CSTRORM_INTMEM + CSTORM_SYNC_BLOCK_OFFSET(fw_sb_id)),
                 0, CSTORM_SYNC_BLOCK_SIZE);
}

static void
bnx2x_wr_sp_sb_data(struct bnx2x_softc *sc,
                  struct hc_sp_status_block_data *sp_sb_data)
{
        uint32_t i;

        for (i = 0;
             i < (sizeof(struct hc_sp_status_block_data) / sizeof(uint32_t));
             i++) {
                REG_WR(sc,
                       (BAR_CSTRORM_INTMEM +
                        CSTORM_SP_STATUS_BLOCK_DATA_OFFSET(SC_FUNC(sc)) +
                        (i * sizeof(uint32_t))),
                       *((uint32_t *) sp_sb_data + i));
        }
}

static void bnx2x_zero_sp_sb(struct bnx2x_softc *sc)
{
        struct hc_sp_status_block_data sp_sb_data;

        memset(&sp_sb_data, 0, sizeof(struct hc_sp_status_block_data));

        sp_sb_data.state = SB_DISABLED;
        sp_sb_data.p_func.vf_valid = FALSE;

        bnx2x_wr_sp_sb_data(sc, &sp_sb_data);

        bnx2x_fill(sc,
                 (BAR_CSTRORM_INTMEM +
                  CSTORM_SP_STATUS_BLOCK_OFFSET(SC_FUNC(sc))),
                 0, CSTORM_SP_STATUS_BLOCK_SIZE);
        bnx2x_fill(sc,
                 (BAR_CSTRORM_INTMEM +
                  CSTORM_SP_SYNC_BLOCK_OFFSET(SC_FUNC(sc))),
                 0, CSTORM_SP_SYNC_BLOCK_SIZE);
}

static void
bnx2x_setup_ndsb_state_machine(struct hc_status_block_sm *hc_sm, int igu_sb_id,
                             int igu_seg_id)
{
        hc_sm->igu_sb_id = igu_sb_id;
        hc_sm->igu_seg_id = igu_seg_id;
        hc_sm->timer_value = 0xFF;
        hc_sm->time_to_expire = 0xFFFFFFFF;
}

static void bnx2x_map_sb_state_machines(struct hc_index_data *index_data)
{
        /* zero out state machine indices */

        /* rx indices */
        index_data[HC_INDEX_ETH_RX_CQ_CONS].flags &= ~HC_INDEX_DATA_SM_ID;

        /* tx indices */
        index_data[HC_INDEX_OOO_TX_CQ_CONS].flags &= ~HC_INDEX_DATA_SM_ID;
        index_data[HC_INDEX_ETH_TX_CQ_CONS_COS0].flags &= ~HC_INDEX_DATA_SM_ID;
        index_data[HC_INDEX_ETH_TX_CQ_CONS_COS1].flags &= ~HC_INDEX_DATA_SM_ID;
        index_data[HC_INDEX_ETH_TX_CQ_CONS_COS2].flags &= ~HC_INDEX_DATA_SM_ID;

        /* map indices */

        /* rx indices */
        index_data[HC_INDEX_ETH_RX_CQ_CONS].flags |=
            (SM_RX_ID << HC_INDEX_DATA_SM_ID_SHIFT);

        /* tx indices */
        index_data[HC_INDEX_OOO_TX_CQ_CONS].flags |=
            (SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT);
        index_data[HC_INDEX_ETH_TX_CQ_CONS_COS0].flags |=
            (SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT);
        index_data[HC_INDEX_ETH_TX_CQ_CONS_COS1].flags |=
            (SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT);
        index_data[HC_INDEX_ETH_TX_CQ_CONS_COS2].flags |=
            (SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT);
}

static void
bnx2x_init_sb(struct bnx2x_softc *sc, rte_iova_t busaddr, int vfid,
            uint8_t vf_valid, int fw_sb_id, int igu_sb_id)
{
        struct hc_status_block_data_e2 sb_data_e2;
        struct hc_status_block_data_e1x sb_data_e1x;
        struct hc_status_block_sm *hc_sm_p;
        uint32_t *sb_data_p;
        int igu_seg_id;
        int data_size;

        if (CHIP_INT_MODE_IS_BC(sc)) {
                igu_seg_id = HC_SEG_ACCESS_NORM;
        } else {
                igu_seg_id = IGU_SEG_ACCESS_NORM;
        }

        bnx2x_zero_fp_sb(sc, fw_sb_id);

        if (!CHIP_IS_E1x(sc)) {
                memset(&sb_data_e2, 0, sizeof(struct hc_status_block_data_e2));
                sb_data_e2.common.state = SB_ENABLED;
                sb_data_e2.common.p_func.pf_id = SC_FUNC(sc);
                sb_data_e2.common.p_func.vf_id = vfid;
                sb_data_e2.common.p_func.vf_valid = vf_valid;
                sb_data_e2.common.p_func.vnic_id = SC_VN(sc);
                sb_data_e2.common.same_igu_sb_1b = TRUE;
                sb_data_e2.common.host_sb_addr.hi = U64_HI(busaddr);
                sb_data_e2.common.host_sb_addr.lo = U64_LO(busaddr);
                hc_sm_p = sb_data_e2.common.state_machine;
                sb_data_p = (uint32_t *) & sb_data_e2;
                data_size = (sizeof(struct hc_status_block_data_e2) /
                             sizeof(uint32_t));
                bnx2x_map_sb_state_machines(sb_data_e2.index_data);
        } else {
                memset(&sb_data_e1x, 0,
                       sizeof(struct hc_status_block_data_e1x));
                sb_data_e1x.common.state = SB_ENABLED;
                sb_data_e1x.common.p_func.pf_id = SC_FUNC(sc);
                sb_data_e1x.common.p_func.vf_id = 0xff;
                sb_data_e1x.common.p_func.vf_valid = FALSE;
                sb_data_e1x.common.p_func.vnic_id = SC_VN(sc);
                sb_data_e1x.common.same_igu_sb_1b = TRUE;
                sb_data_e1x.common.host_sb_addr.hi = U64_HI(busaddr);
                sb_data_e1x.common.host_sb_addr.lo = U64_LO(busaddr);
                hc_sm_p = sb_data_e1x.common.state_machine;
                sb_data_p = (uint32_t *) & sb_data_e1x;
                data_size = (sizeof(struct hc_status_block_data_e1x) /
                             sizeof(uint32_t));
                bnx2x_map_sb_state_machines(sb_data_e1x.index_data);
        }

        bnx2x_setup_ndsb_state_machine(&hc_sm_p[SM_RX_ID], igu_sb_id, igu_seg_id);
        bnx2x_setup_ndsb_state_machine(&hc_sm_p[SM_TX_ID], igu_sb_id, igu_seg_id);

        /* write indices to HW - PCI guarantees endianity of regpairs */
        bnx2x_wr_fp_sb_data(sc, fw_sb_id, sb_data_p, data_size);
}

static uint8_t bnx2x_fp_qzone_id(struct bnx2x_fastpath *fp)
{
        if (CHIP_IS_E1x(fp->sc)) {
                return fp->cl_id + SC_PORT(fp->sc) * ETH_MAX_RX_CLIENTS_E1H;
        } else {
                return fp->cl_id;
        }
}

static uint32_t
bnx2x_rx_ustorm_prods_offset(struct bnx2x_softc *sc, struct bnx2x_fastpath *fp)
{
        uint32_t offset = BAR_USTRORM_INTMEM;

        if (IS_VF(sc)) {
                return PXP_VF_ADDR_USDM_QUEUES_START +
                        (sc->acquire_resp.resc.hw_qid[fp->index] *
                         sizeof(struct ustorm_queue_zone_data));
        } else if (!CHIP_IS_E1x(sc)) {
                offset += USTORM_RX_PRODS_E2_OFFSET(fp->cl_qzone_id);
        } else {
                offset += USTORM_RX_PRODS_E1X_OFFSET(SC_PORT(sc), fp->cl_id);
        }

        return offset;
}

static void bnx2x_init_eth_fp(struct bnx2x_softc *sc, int idx)
{
        struct bnx2x_fastpath *fp = &sc->fp[idx];
        uint32_t cids[ECORE_MULTI_TX_COS] = { 0 };
        unsigned long q_type = 0;
        int cos;

        fp->sc = sc;
        fp->index = idx;

        fp->igu_sb_id = (sc->igu_base_sb + idx + CNIC_SUPPORT(sc));
        fp->fw_sb_id = (sc->base_fw_ndsb + idx + CNIC_SUPPORT(sc));

        if (CHIP_IS_E1x(sc))
                fp->cl_id = SC_L_ID(sc) + idx;
        else
/* want client ID same as IGU SB ID for non-E1 */
                fp->cl_id = fp->igu_sb_id;
        fp->cl_qzone_id = bnx2x_fp_qzone_id(fp);

        /* setup sb indices */
        if (!CHIP_IS_E1x(sc)) {
                fp->sb_index_values = fp->status_block.e2_sb->sb.index_values;
                fp->sb_running_index = fp->status_block.e2_sb->sb.running_index;
        } else {
                fp->sb_index_values = fp->status_block.e1x_sb->sb.index_values;
                fp->sb_running_index =
                    fp->status_block.e1x_sb->sb.running_index;
        }

        /* init shortcut */
        fp->ustorm_rx_prods_offset = bnx2x_rx_ustorm_prods_offset(sc, fp);

        fp->rx_cq_cons_sb = &fp->sb_index_values[HC_INDEX_ETH_RX_CQ_CONS];

        for (cos = 0; cos < sc->max_cos; cos++) {
                cids[cos] = idx;
        }
        fp->tx_cons_sb = &fp->sb_index_values[HC_INDEX_ETH_TX_CQ_CONS_COS0];

        /* nothing more for a VF to do */
        if (IS_VF(sc)) {
                return;
        }

        bnx2x_init_sb(sc, fp->sb_dma.paddr, BNX2X_VF_ID_INVALID, FALSE,
                    fp->fw_sb_id, fp->igu_sb_id);

        bnx2x_update_fp_sb_idx(fp);

        /* Configure Queue State object */
        bnx2x_set_bit(ECORE_Q_TYPE_HAS_RX, &q_type);
        bnx2x_set_bit(ECORE_Q_TYPE_HAS_TX, &q_type);

        ecore_init_queue_obj(sc,
                             &sc->sp_objs[idx].q_obj,
                             fp->cl_id,
                             cids,
                             sc->max_cos,
                             SC_FUNC(sc),
                             BNX2X_SP(sc, q_rdata),
                             (rte_iova_t)BNX2X_SP_MAPPING(sc, q_rdata),
                             q_type);

        /* configure classification DBs */
        ecore_init_mac_obj(sc,
                           &sc->sp_objs[idx].mac_obj,
                           fp->cl_id,
                           idx,
                           SC_FUNC(sc),
                           BNX2X_SP(sc, mac_rdata),
                           (rte_iova_t)BNX2X_SP_MAPPING(sc, mac_rdata),
                           ECORE_FILTER_MAC_PENDING, &sc->sp_state,
                           ECORE_OBJ_TYPE_RX_TX, &sc->macs_pool);
}

static void
bnx2x_update_rx_prod(struct bnx2x_softc *sc, struct bnx2x_fastpath *fp,
                   uint16_t rx_bd_prod, uint16_t rx_cq_prod)
{
        union ustorm_eth_rx_producers rx_prods;
        uint32_t i;

        /* update producers */
        rx_prods.prod.bd_prod = rx_bd_prod;
        rx_prods.prod.cqe_prod = rx_cq_prod;
        rx_prods.prod.reserved = 0;

        /*
         * Make sure that the BD and SGE data is updated before updating the
         * producers since FW might read the BD/SGE right after the producer
         * is updated.
         * This is only applicable for weak-ordered memory model archs such
         * as IA-64. The following barrier is also mandatory since FW will
         * assumes BDs must have buffers.
         */
        wmb();

        for (i = 0; i < (sizeof(rx_prods) / 4); i++) {
                REG_WR(sc,
                       (fp->ustorm_rx_prods_offset + (i * 4)),
                       rx_prods.raw_data[i]);
        }

        wmb();                  /* keep prod updates ordered */
}

static void bnx2x_init_rx_rings(struct bnx2x_softc *sc)
{
        struct bnx2x_fastpath *fp;
        int i;
        struct bnx2x_rx_queue *rxq;

        for (i = 0; i < sc->num_queues; i++) {
                fp = &sc->fp[i];
                rxq = sc->rx_queues[fp->index];
                if (!rxq) {
                        PMD_RX_LOG(ERR, "RX queue is NULL");
                        return;
                }

                rxq->rx_bd_head = 0;
                rxq->rx_bd_tail = rxq->nb_rx_desc;
                rxq->rx_cq_head = 0;
                rxq->rx_cq_tail = TOTAL_RCQ_ENTRIES(rxq);
                *fp->rx_cq_cons_sb = 0;

                /*
                 * Activate the BD ring...
                 * Warning, this will generate an interrupt (to the TSTORM)
                 * so this can only be done after the chip is initialized
                 */
                bnx2x_update_rx_prod(sc, fp, rxq->rx_bd_tail, rxq->rx_cq_tail);

                if (i != 0) {
                        continue;
                }
        }
}

static void bnx2x_init_tx_ring_one(struct bnx2x_fastpath *fp)
{
        struct bnx2x_tx_queue *txq = fp->sc->tx_queues[fp->index];

        fp->tx_db.data.header.header = 1 << DOORBELL_HDR_DB_TYPE_SHIFT;
        fp->tx_db.data.zero_fill1 = 0;
        fp->tx_db.data.prod = 0;

        if (!txq) {
                PMD_TX_LOG(ERR, "ERROR: TX queue is NULL");
                return;
        }

        txq->tx_pkt_tail = 0;
        txq->tx_pkt_head = 0;
        txq->tx_bd_tail = 0;
        txq->tx_bd_head = 0;
}

static void bnx2x_init_tx_rings(struct bnx2x_softc *sc)
{
        int i;

        for (i = 0; i < sc->num_queues; i++) {
                bnx2x_init_tx_ring_one(&sc->fp[i]);
        }
}

static void bnx2x_init_def_sb(struct bnx2x_softc *sc)
{
        struct host_sp_status_block *def_sb = sc->def_sb;
        rte_iova_t mapping = sc->def_sb_dma.paddr;
        int igu_sp_sb_index;
        int igu_seg_id;
        int port = SC_PORT(sc);
        int func = SC_FUNC(sc);
        int reg_offset, reg_offset_en5;
        uint64_t section;
        int index, sindex;
        struct hc_sp_status_block_data sp_sb_data;

        memset(&sp_sb_data, 0, sizeof(struct hc_sp_status_block_data));

        if (CHIP_INT_MODE_IS_BC(sc)) {
                igu_sp_sb_index = DEF_SB_IGU_ID;
                igu_seg_id = HC_SEG_ACCESS_DEF;
        } else {
                igu_sp_sb_index = sc->igu_dsb_id;
                igu_seg_id = IGU_SEG_ACCESS_DEF;
        }

        /* attentions */
        section = ((uint64_t) mapping +
                   offsetof(struct host_sp_status_block, atten_status_block));
        def_sb->atten_status_block.status_block_id = igu_sp_sb_index;
        sc->attn_state = 0;

        reg_offset = (port) ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 :
            MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0;

        reg_offset_en5 = (port) ? MISC_REG_AEU_ENABLE5_FUNC_1_OUT_0 :
            MISC_REG_AEU_ENABLE5_FUNC_0_OUT_0;

        for (index = 0; index < MAX_DYNAMIC_ATTN_GRPS; index++) {
/* take care of sig[0]..sig[4] */
                for (sindex = 0; sindex < 4; sindex++) {
                        sc->attn_group[index].sig[sindex] =
                            REG_RD(sc,
                                   (reg_offset + (sindex * 0x4) +
                                    (0x10 * index)));
                }

                if (!CHIP_IS_E1x(sc)) {
                        /*
                         * enable5 is separate from the rest of the registers,
                         * and the address skip is 4 and not 16 between the
                         * different groups
                         */
                        sc->attn_group[index].sig[4] =
                            REG_RD(sc, (reg_offset_en5 + (0x4 * index)));
                } else {
                        sc->attn_group[index].sig[4] = 0;
                }
        }

        if (sc->devinfo.int_block == INT_BLOCK_HC) {
                reg_offset =
                    port ? HC_REG_ATTN_MSG1_ADDR_L : HC_REG_ATTN_MSG0_ADDR_L;
                REG_WR(sc, reg_offset, U64_LO(section));
                REG_WR(sc, (reg_offset + 4), U64_HI(section));
        } else if (!CHIP_IS_E1x(sc)) {
                REG_WR(sc, IGU_REG_ATTN_MSG_ADDR_L, U64_LO(section));
                REG_WR(sc, IGU_REG_ATTN_MSG_ADDR_H, U64_HI(section));
        }

        section = ((uint64_t) mapping +
                   offsetof(struct host_sp_status_block, sp_sb));

        bnx2x_zero_sp_sb(sc);

        /* PCI guarantees endianity of regpair */
        sp_sb_data.state = SB_ENABLED;
        sp_sb_data.host_sb_addr.lo = U64_LO(section);
        sp_sb_data.host_sb_addr.hi = U64_HI(section);
        sp_sb_data.igu_sb_id = igu_sp_sb_index;
        sp_sb_data.igu_seg_id = igu_seg_id;
        sp_sb_data.p_func.pf_id = func;
        sp_sb_data.p_func.vnic_id = SC_VN(sc);
        sp_sb_data.p_func.vf_id = 0xff;

        bnx2x_wr_sp_sb_data(sc, &sp_sb_data);

        bnx2x_ack_sb(sc, sc->igu_dsb_id, USTORM_ID, 0, IGU_INT_ENABLE, 0);
}

static void bnx2x_init_sp_ring(struct bnx2x_softc *sc)
{
        atomic_store_rel_long(&sc->cq_spq_left, MAX_SPQ_PENDING);
        sc->spq_prod_idx = 0;
        sc->dsb_sp_prod =
            &sc->def_sb->sp_sb.index_values[HC_SP_INDEX_ETH_DEF_CONS];
        sc->spq_prod_bd = sc->spq;
        sc->spq_last_bd = (sc->spq_prod_bd + MAX_SP_DESC_CNT);
}

static void bnx2x_init_eq_ring(struct bnx2x_softc *sc)
{
        union event_ring_elem *elem;
        int i;

        for (i = 1; i <= NUM_EQ_PAGES; i++) {
                elem = &sc->eq[EQ_DESC_CNT_PAGE * i - 1];

                elem->next_page.addr.hi = htole32(U64_HI(sc->eq_dma.paddr +
                                                         BNX2X_PAGE_SIZE *
                                                         (i % NUM_EQ_PAGES)));
                elem->next_page.addr.lo = htole32(U64_LO(sc->eq_dma.paddr +
                                                         BNX2X_PAGE_SIZE *
                                                         (i % NUM_EQ_PAGES)));
        }

        sc->eq_cons = 0;
        sc->eq_prod = NUM_EQ_DESC;
        sc->eq_cons_sb = &sc->def_sb->sp_sb.index_values[HC_SP_INDEX_EQ_CONS];

        atomic_store_rel_long(&sc->eq_spq_left,
                              (min((MAX_SP_DESC_CNT - MAX_SPQ_PENDING),
                                   NUM_EQ_DESC) - 1));
}

static void bnx2x_init_internal_common(struct bnx2x_softc *sc)
{
        int i;

        if (IS_MF_SI(sc)) {
/*
 * In switch independent mode, the TSTORM needs to accept
 * packets that failed classification, since approximate match
 * mac addresses aren't written to NIG LLH.
 */
                REG_WR8(sc,
                        (BAR_TSTRORM_INTMEM +
                         TSTORM_ACCEPT_CLASSIFY_FAILED_OFFSET), 2);
        } else
                REG_WR8(sc,
                        (BAR_TSTRORM_INTMEM +
                         TSTORM_ACCEPT_CLASSIFY_FAILED_OFFSET), 0);

        /*
         * Zero this manually as its initialization is currently missing
         * in the initTool.
         */
        for (i = 0; i < (USTORM_AGG_DATA_SIZE >> 2); i++) {
                REG_WR(sc,
                       (BAR_USTRORM_INTMEM + USTORM_AGG_DATA_OFFSET + (i * 4)),
                       0);
        }

        if (!CHIP_IS_E1x(sc)) {
                REG_WR8(sc, (BAR_CSTRORM_INTMEM + CSTORM_IGU_MODE_OFFSET),
                        CHIP_INT_MODE_IS_BC(sc) ? HC_IGU_BC_MODE :
                        HC_IGU_NBC_MODE);
        }
}

static void bnx2x_init_internal(struct bnx2x_softc *sc, uint32_t load_code)
{
        switch (load_code) {
        case FW_MSG_CODE_DRV_LOAD_COMMON:
        case FW_MSG_CODE_DRV_LOAD_COMMON_CHIP:
                bnx2x_init_internal_common(sc);
                /* no break */

        case FW_MSG_CODE_DRV_LOAD_PORT:
                /* nothing to do */
                /* no break */

        case FW_MSG_CODE_DRV_LOAD_FUNCTION:
                /* internal memory per function is initialized inside bnx2x_pf_init */
                break;

        default:
                PMD_DRV_LOG(NOTICE, "Unknown load_code (0x%x) from MCP",
                            load_code);
                break;
        }
}

static void
storm_memset_func_cfg(struct bnx2x_softc *sc,
                      struct tstorm_eth_function_common_config *tcfg,
                      uint16_t abs_fid)
{
        uint32_t addr;
        size_t size;

        addr = (BAR_TSTRORM_INTMEM +
                TSTORM_FUNCTION_COMMON_CONFIG_OFFSET(abs_fid));
        size = sizeof(struct tstorm_eth_function_common_config);
        ecore_storm_memset_struct(sc, addr, size, (uint32_t *) tcfg);
}

static void bnx2x_func_init(struct bnx2x_softc *sc, struct bnx2x_func_init_params *p)
{
        struct tstorm_eth_function_common_config tcfg = { 0 };

        if (CHIP_IS_E1x(sc)) {
                storm_memset_func_cfg(sc, &tcfg, p->func_id);
        }

        /* Enable the function in the FW */
        storm_memset_vf_to_pf(sc, p->func_id, p->pf_id);
        storm_memset_func_en(sc, p->func_id, 1);

        /* spq */
        if (p->func_flgs & FUNC_FLG_SPQ) {
                storm_memset_spq_addr(sc, p->spq_map, p->func_id);
                REG_WR(sc,
                       (XSEM_REG_FAST_MEMORY +
                        XSTORM_SPQ_PROD_OFFSET(p->func_id)), p->spq_prod);
        }
}

/*
 * Calculates the sum of vn_min_rates.
 * It's needed for further normalizing of the min_rates.
 * Returns:
 *   sum of vn_min_rates.
 *     or
 *   0 - if all the min_rates are 0.
 * In the later case fainess algorithm should be deactivated.
 * If all min rates are not zero then those that are zeroes will be set to 1.
 */
static void bnx2x_calc_vn_min(struct bnx2x_softc *sc, struct cmng_init_input *input)
{
        uint32_t vn_cfg;
        uint32_t vn_min_rate;
        int all_zero = 1;
        int vn;

        for (vn = VN_0; vn < SC_MAX_VN_NUM(sc); vn++) {
                vn_cfg = sc->devinfo.mf_info.mf_config[vn];
                vn_min_rate = (((vn_cfg & FUNC_MF_CFG_MIN_BW_MASK) >>
                                FUNC_MF_CFG_MIN_BW_SHIFT) * 100);

                if (vn_cfg & FUNC_MF_CFG_FUNC_HIDE) {
                        /* skip hidden VNs */
                        vn_min_rate = 0;
                } else if (!vn_min_rate) {
                        /* If min rate is zero - set it to 100 */
                        vn_min_rate = DEF_MIN_RATE;
                } else {
                        all_zero = 0;
                }

                input->vnic_min_rate[vn] = vn_min_rate;
        }

        /* if ETS or all min rates are zeros - disable fairness */
        if (all_zero) {
                input->flags.cmng_enables &= ~CMNG_FLAGS_PER_PORT_FAIRNESS_VN;
        } else {
                input->flags.cmng_enables |= CMNG_FLAGS_PER_PORT_FAIRNESS_VN;
        }
}

static uint16_t
bnx2x_extract_max_cfg(__rte_unused struct bnx2x_softc *sc, uint32_t mf_cfg)
{
        uint16_t max_cfg = ((mf_cfg & FUNC_MF_CFG_MAX_BW_MASK) >>
                            FUNC_MF_CFG_MAX_BW_SHIFT);

        if (!max_cfg) {
                PMD_DRV_LOG(DEBUG,
                            "Max BW configured to 0 - using 100 instead");
                max_cfg = 100;
        }

        return max_cfg;
}

static void
bnx2x_calc_vn_max(struct bnx2x_softc *sc, int vn, struct cmng_init_input *input)
{
        uint16_t vn_max_rate;
        uint32_t vn_cfg = sc->devinfo.mf_info.mf_config[vn];
        uint32_t max_cfg;

        if (vn_cfg & FUNC_MF_CFG_FUNC_HIDE) {
                vn_max_rate = 0;
        } else {
                max_cfg = bnx2x_extract_max_cfg(sc, vn_cfg);

                if (IS_MF_SI(sc)) {
                        /* max_cfg in percents of linkspeed */
                        vn_max_rate =
                            ((sc->link_vars.line_speed * max_cfg) / 100);
                } else {        /* SD modes */
                        /* max_cfg is absolute in 100Mb units */
                        vn_max_rate = (max_cfg * 100);
                }
        }

        input->vnic_max_rate[vn] = vn_max_rate;
}

static void
bnx2x_cmng_fns_init(struct bnx2x_softc *sc, uint8_t read_cfg, uint8_t cmng_type)
{
        struct cmng_init_input input;
        int vn;

        memset(&input, 0, sizeof(struct cmng_init_input));

        input.port_rate = sc->link_vars.line_speed;

        if (cmng_type == CMNG_FNS_MINMAX) {
/* read mf conf from shmem */
                if (read_cfg) {
                        bnx2x_read_mf_cfg(sc);
                }

/* get VN min rate and enable fairness if not 0 */
                bnx2x_calc_vn_min(sc, &input);

/* get VN max rate */
                if (sc->port.pmf) {
                        for (vn = VN_0; vn < SC_MAX_VN_NUM(sc); vn++) {
                                bnx2x_calc_vn_max(sc, vn, &input);
                        }
                }

/* always enable rate shaping and fairness */
                input.flags.cmng_enables |= CMNG_FLAGS_PER_PORT_RATE_SHAPING_VN;

                ecore_init_cmng(&input, &sc->cmng);
                return;
        }
}

static int bnx2x_get_cmng_fns_mode(struct bnx2x_softc *sc)
{
        if (CHIP_REV_IS_SLOW(sc)) {
                return CMNG_FNS_NONE;
        }

        if (IS_MF(sc)) {
                return CMNG_FNS_MINMAX;
        }

        return CMNG_FNS_NONE;
}

static void
storm_memset_cmng(struct bnx2x_softc *sc, struct cmng_init *cmng, uint8_t port)
{
        int vn;
        int func;
        uint32_t addr;
        size_t size;

        addr = (BAR_XSTRORM_INTMEM + XSTORM_CMNG_PER_PORT_VARS_OFFSET(port));
        size = sizeof(struct cmng_struct_per_port);
        ecore_storm_memset_struct(sc, addr, size, (uint32_t *) & cmng->port);

        for (vn = VN_0; vn < SC_MAX_VN_NUM(sc); vn++) {
                func = func_by_vn(sc, vn);

                addr = (BAR_XSTRORM_INTMEM +
                        XSTORM_RATE_SHAPING_PER_VN_VARS_OFFSET(func));
                size = sizeof(struct rate_shaping_vars_per_vn);
                ecore_storm_memset_struct(sc, addr, size,
                                          (uint32_t *) & cmng->
                                          vnic.vnic_max_rate[vn]);

                addr = (BAR_XSTRORM_INTMEM +
                        XSTORM_FAIRNESS_PER_VN_VARS_OFFSET(func));
                size = sizeof(struct fairness_vars_per_vn);
                ecore_storm_memset_struct(sc, addr, size,
                                          (uint32_t *) & cmng->
                                          vnic.vnic_min_rate[vn]);
        }
}

static void bnx2x_pf_init(struct bnx2x_softc *sc)
{
        struct bnx2x_func_init_params func_init;
        struct event_ring_data eq_data;
        uint16_t flags;

        memset(&eq_data, 0, sizeof(struct event_ring_data));
        memset(&func_init, 0, sizeof(struct bnx2x_func_init_params));

        if (!CHIP_IS_E1x(sc)) {
/* reset IGU PF statistics: MSIX + ATTN */
/* PF */
                REG_WR(sc,
                       (IGU_REG_STATISTIC_NUM_MESSAGE_SENT +
                        (BNX2X_IGU_STAS_MSG_VF_CNT * 4) +
                        ((CHIP_IS_MODE_4_PORT(sc) ? SC_FUNC(sc) : SC_VN(sc)) *
                         4)), 0);
/* ATTN */
                REG_WR(sc,
                       (IGU_REG_STATISTIC_NUM_MESSAGE_SENT +
                        (BNX2X_IGU_STAS_MSG_VF_CNT * 4) +
                        (BNX2X_IGU_STAS_MSG_PF_CNT * 4) +
                        ((CHIP_IS_MODE_4_PORT(sc) ? SC_FUNC(sc) : SC_VN(sc)) *
                         4)), 0);
        }

        /* function setup flags */
        flags = (FUNC_FLG_STATS | FUNC_FLG_LEADING | FUNC_FLG_SPQ);

        func_init.func_flgs = flags;
        func_init.pf_id = SC_FUNC(sc);
        func_init.func_id = SC_FUNC(sc);
        func_init.spq_map = sc->spq_dma.paddr;
        func_init.spq_prod = sc->spq_prod_idx;

        bnx2x_func_init(sc, &func_init);

        memset(&sc->cmng, 0, sizeof(struct cmng_struct_per_port));

        /*
         * Congestion management values depend on the link rate.
         * There is no active link so initial link rate is set to 10Gbps.
         * When the link comes up the congestion management values are
         * re-calculated according to the actual link rate.
         */
        sc->link_vars.line_speed = SPEED_10000;
        bnx2x_cmng_fns_init(sc, TRUE, bnx2x_get_cmng_fns_mode(sc));

        /* Only the PMF sets the HW */
        if (sc->port.pmf) {
                storm_memset_cmng(sc, &sc->cmng, SC_PORT(sc));
        }

        /* init Event Queue - PCI bus guarantees correct endainity */
        eq_data.base_addr.hi = U64_HI(sc->eq_dma.paddr);
        eq_data.base_addr.lo = U64_LO(sc->eq_dma.paddr);
        eq_data.producer = sc->eq_prod;
        eq_data.index_id = HC_SP_INDEX_EQ_CONS;
        eq_data.sb_id = DEF_SB_ID;
        storm_memset_eq_data(sc, &eq_data, SC_FUNC(sc));
}

static void bnx2x_hc_int_enable(struct bnx2x_softc *sc)
{
        int port = SC_PORT(sc);
        uint32_t addr = (port) ? HC_REG_CONFIG_1 : HC_REG_CONFIG_0;
        uint32_t val = REG_RD(sc, addr);
        uint8_t msix = (sc->interrupt_mode == INTR_MODE_MSIX)
            || (sc->interrupt_mode == INTR_MODE_SINGLE_MSIX);
        uint8_t single_msix = (sc->interrupt_mode == INTR_MODE_SINGLE_MSIX);
        uint8_t msi = (sc->interrupt_mode == INTR_MODE_MSI);

        if (msix) {
                val &= ~(HC_CONFIG_0_REG_SINGLE_ISR_EN_0 |
                         HC_CONFIG_0_REG_INT_LINE_EN_0);
                val |= (HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 |
                        HC_CONFIG_0_REG_ATTN_BIT_EN_0);
                if (single_msix) {
                        val |= HC_CONFIG_0_REG_SINGLE_ISR_EN_0;
                }
        } else if (msi) {
                val &= ~HC_CONFIG_0_REG_INT_LINE_EN_0;
                val |= (HC_CONFIG_0_REG_SINGLE_ISR_EN_0 |
                        HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 |
                        HC_CONFIG_0_REG_ATTN_BIT_EN_0);
        } else {
                val |= (HC_CONFIG_0_REG_SINGLE_ISR_EN_0 |
                        HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 |
                        HC_CONFIG_0_REG_INT_LINE_EN_0 |
                        HC_CONFIG_0_REG_ATTN_BIT_EN_0);

                REG_WR(sc, addr, val);

                val &= ~HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0;
        }

        REG_WR(sc, addr, val);

        /* ensure that HC_CONFIG is written before leading/trailing edge config */
        mb();

        /* init leading/trailing edge */
        if (IS_MF(sc)) {
                val = (0xee0f | (1 << (SC_VN(sc) + 4)));
                if (sc->port.pmf) {
                        /* enable nig and gpio3 attention */
                        val |= 0x1100;
                }
        } else {
                val = 0xffff;
        }

        REG_WR(sc, (HC_REG_TRAILING_EDGE_0 + port * 8), val);
        REG_WR(sc, (HC_REG_LEADING_EDGE_0 + port * 8), val);

        /* make sure that interrupts are indeed enabled from here on */
        mb();
}

static void bnx2x_igu_int_enable(struct bnx2x_softc *sc)
{
        uint32_t val;
        uint8_t msix = (sc->interrupt_mode == INTR_MODE_MSIX)
            || (sc->interrupt_mode == INTR_MODE_SINGLE_MSIX);
        uint8_t single_msix = (sc->interrupt_mode == INTR_MODE_SINGLE_MSIX);
        uint8_t msi = (sc->interrupt_mode == INTR_MODE_MSI);

        val = REG_RD(sc, IGU_REG_PF_CONFIGURATION);

        if (msix) {
                val &= ~(IGU_PF_CONF_INT_LINE_EN | IGU_PF_CONF_SINGLE_ISR_EN);
                val |= (IGU_PF_CONF_MSI_MSIX_EN | IGU_PF_CONF_ATTN_BIT_EN);
                if (single_msix) {
                        val |= IGU_PF_CONF_SINGLE_ISR_EN;
                }
        } else if (msi) {
                val &= ~IGU_PF_CONF_INT_LINE_EN;
                val |= (IGU_PF_CONF_MSI_MSIX_EN |
                        IGU_PF_CONF_ATTN_BIT_EN | IGU_PF_CONF_SINGLE_ISR_EN);
        } else {
                val &= ~IGU_PF_CONF_MSI_MSIX_EN;
                val |= (IGU_PF_CONF_INT_LINE_EN |
                        IGU_PF_CONF_ATTN_BIT_EN | IGU_PF_CONF_SINGLE_ISR_EN);
        }

        /* clean previous status - need to configure igu prior to ack */
        if ((!msix) || single_msix) {
                REG_WR(sc, IGU_REG_PF_CONFIGURATION, val);
                bnx2x_ack_int(sc);
        }

        val |= IGU_PF_CONF_FUNC_EN;

        PMD_DRV_LOG(DEBUG, "write 0x%x to IGU mode %s",
                    val, ((msix) ? "MSI-X" : ((msi) ? "MSI" : "INTx")));

        REG_WR(sc, IGU_REG_PF_CONFIGURATION, val);

        mb();

        /* init leading/trailing edge */
        if (IS_MF(sc)) {
                val = (0xee0f | (1 << (SC_VN(sc) + 4)));
                if (sc->port.pmf) {
                        /* enable nig and gpio3 attention */
                        val |= 0x1100;
                }
        } else {
                val = 0xffff;
        }

        REG_WR(sc, IGU_REG_TRAILING_EDGE_LATCH, val);
        REG_WR(sc, IGU_REG_LEADING_EDGE_LATCH, val);

        /* make sure that interrupts are indeed enabled from here on */
        mb();
}

static void bnx2x_int_enable(struct bnx2x_softc *sc)
{
        if (sc->devinfo.int_block == INT_BLOCK_HC) {
                bnx2x_hc_int_enable(sc);
        } else {
                bnx2x_igu_int_enable(sc);
        }
}

static void bnx2x_hc_int_disable(struct bnx2x_softc *sc)
{
        int port = SC_PORT(sc);
        uint32_t addr = (port) ? HC_REG_CONFIG_1 : HC_REG_CONFIG_0;
        uint32_t val = REG_RD(sc, addr);

        val &= ~(HC_CONFIG_0_REG_SINGLE_ISR_EN_0 |
                 HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 |
                 HC_CONFIG_0_REG_INT_LINE_EN_0 | HC_CONFIG_0_REG_ATTN_BIT_EN_0);
        /* flush all outstanding writes */
        mb();

        REG_WR(sc, addr, val);
        if (REG_RD(sc, addr) != val) {
                PMD_DRV_LOG(ERR, "proper val not read from HC IGU!");
        }
}

static void bnx2x_igu_int_disable(struct bnx2x_softc *sc)
{
        uint32_t val = REG_RD(sc, IGU_REG_PF_CONFIGURATION);

        val &= ~(IGU_PF_CONF_MSI_MSIX_EN |
                 IGU_PF_CONF_INT_LINE_EN | IGU_PF_CONF_ATTN_BIT_EN);

        PMD_DRV_LOG(DEBUG, "write %x to IGU", val);

        /* flush all outstanding writes */
        mb();

        REG_WR(sc, IGU_REG_PF_CONFIGURATION, val);
        if (REG_RD(sc, IGU_REG_PF_CONFIGURATION) != val) {
                PMD_DRV_LOG(ERR, "proper val not read from IGU!");
        }
}

static void bnx2x_int_disable(struct bnx2x_softc *sc)
{
        if (sc->devinfo.int_block == INT_BLOCK_HC) {
                bnx2x_hc_int_disable(sc);
        } else {
                bnx2x_igu_int_disable(sc);
        }
}

static void bnx2x_nic_init(struct bnx2x_softc *sc, int load_code)
{
        int i;

        PMD_INIT_FUNC_TRACE();

        for (i = 0; i < sc->num_queues; i++) {
                bnx2x_init_eth_fp(sc, i);
        }

        rmb();                  /* ensure status block indices were read */

        bnx2x_init_rx_rings(sc);
        bnx2x_init_tx_rings(sc);

        if (IS_VF(sc)) {
                bnx2x_memset_stats(sc);
                return;
        }

        /* initialize MOD_ABS interrupts */
        elink_init_mod_abs_int(sc, &sc->link_vars,
                               sc->devinfo.chip_id,
                               sc->devinfo.shmem_base,
                               sc->devinfo.shmem2_base, SC_PORT(sc));

        bnx2x_init_def_sb(sc);
        bnx2x_update_dsb_idx(sc);
        bnx2x_init_sp_ring(sc);
        bnx2x_init_eq_ring(sc);
        bnx2x_init_internal(sc, load_code);
        bnx2x_pf_init(sc);
        bnx2x_stats_init(sc);

        /* flush all before enabling interrupts */
        mb();

        bnx2x_int_enable(sc);

        /* check for SPIO5 */
        bnx2x_attn_int_deasserted0(sc,
                                 REG_RD(sc,
                                        (MISC_REG_AEU_AFTER_INVERT_1_FUNC_0 +
                                         SC_PORT(sc) * 4)) &
                                 AEU_INPUTS_ATTN_BITS_SPIO5);
}

static void bnx2x_init_objs(struct bnx2x_softc *sc)
{
        /* mcast rules must be added to tx if tx switching is enabled */
        ecore_obj_type o_type;
        if (sc->flags & BNX2X_TX_SWITCHING)
                o_type = ECORE_OBJ_TYPE_RX_TX;
        else
                o_type = ECORE_OBJ_TYPE_RX;

        /* RX_MODE controlling object */
        ecore_init_rx_mode_obj(sc, &sc->rx_mode_obj);

        /* multicast configuration controlling object */
        ecore_init_mcast_obj(sc,
                             &sc->mcast_obj,
                             sc->fp[0].cl_id,
                             sc->fp[0].index,
                             SC_FUNC(sc),
                             SC_FUNC(sc),
                             BNX2X_SP(sc, mcast_rdata),
                             (rte_iova_t)BNX2X_SP_MAPPING(sc, mcast_rdata),
                             ECORE_FILTER_MCAST_PENDING,
                             &sc->sp_state, o_type);

        /* Setup CAM credit pools */
        ecore_init_mac_credit_pool(sc,
                                   &sc->macs_pool,
                                   SC_FUNC(sc),
                                   CHIP_IS_E1x(sc) ? VNICS_PER_PORT(sc) :
                                   VNICS_PER_PATH(sc));

        ecore_init_vlan_credit_pool(sc,
                                    &sc->vlans_pool,
                                    SC_ABS_FUNC(sc) >> 1,
                                    CHIP_IS_E1x(sc) ? VNICS_PER_PORT(sc) :
                                    VNICS_PER_PATH(sc));

        /* RSS configuration object */
        ecore_init_rss_config_obj(&sc->rss_conf_obj,
                                  sc->fp[0].cl_id,
                                  sc->fp[0].index,
                                  SC_FUNC(sc),
                                  SC_FUNC(sc),
                                  BNX2X_SP(sc, rss_rdata),
                                  (rte_iova_t)BNX2X_SP_MAPPING(sc, rss_rdata),
                                  ECORE_FILTER_RSS_CONF_PENDING,
                                  &sc->sp_state, ECORE_OBJ_TYPE_RX);
}

/*
 * Initialize the function. This must be called before sending CLIENT_SETUP
 * for the first client.
 */
static int bnx2x_func_start(struct bnx2x_softc *sc)
{
        struct ecore_func_state_params func_params = { NULL };
        struct ecore_func_start_params *start_params =
            &func_params.params.start;

        /* Prepare parameters for function state transitions */
        bnx2x_set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags);

        func_params.f_obj = &sc->func_obj;
        func_params.cmd = ECORE_F_CMD_START;

        /* Function parameters */
        start_params->mf_mode = sc->devinfo.mf_info.mf_mode;
        start_params->sd_vlan_tag = OVLAN(sc);

        if (CHIP_IS_E2(sc) || CHIP_IS_E3(sc)) {
                start_params->network_cos_mode = STATIC_COS;
        } else {                /* CHIP_IS_E1X */
                start_params->network_cos_mode = FW_WRR;
        }

        start_params->gre_tunnel_mode = 0;
        start_params->gre_tunnel_rss = 0;

        return ecore_func_state_change(sc, &func_params);
}

static int bnx2x_set_power_state(struct bnx2x_softc *sc, uint8_t state)
{
        uint16_t pmcsr;

        /* If there is no power capability, silently succeed */
        if (!(sc->devinfo.pcie_cap_flags & BNX2X_PM_CAPABLE_FLAG)) {
                PMD_DRV_LOG(WARNING, "No power capability");
                return 0;
        }

        pci_read(sc, (sc->devinfo.pcie_pm_cap_reg + PCIR_POWER_STATUS), &pmcsr,
                 2);

        switch (state) {
        case PCI_PM_D0:
                pci_write_word(sc,
                               (sc->devinfo.pcie_pm_cap_reg +
                                PCIR_POWER_STATUS),
                               ((pmcsr & ~PCIM_PSTAT_DMASK) | PCIM_PSTAT_PME));

                if (pmcsr & PCIM_PSTAT_DMASK) {
                        /* delay required during transition out of D3hot */
                        DELAY(20000);
                }

                break;

        case PCI_PM_D3hot:
                /* don't shut down the power for emulation and FPGA */
                if (CHIP_REV_IS_SLOW(sc)) {
                        return 0;
                }

                pmcsr &= ~PCIM_PSTAT_DMASK;
                pmcsr |= PCIM_PSTAT_D3;

                if (sc->wol) {
                        pmcsr |= PCIM_PSTAT_PMEENABLE;
                }

                pci_write_long(sc,
                               (sc->devinfo.pcie_pm_cap_reg +
                                PCIR_POWER_STATUS), pmcsr);

                /*
                 * No more memory access after this point until device is brought back
                 * to D0 state.
                 */
                break;

        default:
                PMD_DRV_LOG(NOTICE, "Can't support PCI power state = %d",
                            state);
                return -1;
        }

        return 0;
}

/* return true if succeeded to acquire the lock */
static uint8_t bnx2x_trylock_hw_lock(struct bnx2x_softc *sc, uint32_t resource)
{
        uint32_t lock_status;
        uint32_t resource_bit = (1 << resource);
        int func = SC_FUNC(sc);
        uint32_t hw_lock_control_reg;

        /* Validating that the resource is within range */
        if (resource > HW_LOCK_MAX_RESOURCE_VALUE) {
                PMD_DRV_LOG(INFO,
                            "resource(0x%x) > HW_LOCK_MAX_RESOURCE_VALUE(0x%x)",
                            resource, HW_LOCK_MAX_RESOURCE_VALUE);
                return FALSE;
        }

        if (func <= 5) {
                hw_lock_control_reg = (MISC_REG_DRIVER_CONTROL_1 + func * 8);
        } else {
                hw_lock_control_reg =
                    (MISC_REG_DRIVER_CONTROL_7 + (func - 6) * 8);
        }

        /* try to acquire the lock */
        REG_WR(sc, hw_lock_control_reg + 4, resource_bit);
        lock_status = REG_RD(sc, hw_lock_control_reg);
        if (lock_status & resource_bit) {
                return TRUE;
        }

        PMD_DRV_LOG(NOTICE, "Failed to get a resource lock 0x%x", resource);

        return FALSE;
}

/*
 * Get the recovery leader resource id according to the engine this function
 * belongs to. Currently only only 2 engines is supported.
 */
static int bnx2x_get_leader_lock_resource(struct bnx2x_softc *sc)
{
        if (SC_PATH(sc)) {
                return HW_LOCK_RESOURCE_RECOVERY_LEADER_1;
        } else {
                return HW_LOCK_RESOURCE_RECOVERY_LEADER_0;
        }
}

/* try to acquire a leader lock for current engine */
static uint8_t bnx2x_trylock_leader_lock(struct bnx2x_softc *sc)
{
        return bnx2x_trylock_hw_lock(sc, bnx2x_get_leader_lock_resource(sc));
}

static int bnx2x_release_leader_lock(struct bnx2x_softc *sc)
{
        return bnx2x_release_hw_lock(sc, bnx2x_get_leader_lock_resource(sc));
}

/* close gates #2, #3 and #4 */
static void bnx2x_set_234_gates(struct bnx2x_softc *sc, uint8_t close)
{
        uint32_t val;

        /* gates #2 and #4a are closed/opened */
        /* #4 */
        REG_WR(sc, PXP_REG_HST_DISCARD_DOORBELLS, ! !close);
        /* #2 */
        REG_WR(sc, PXP_REG_HST_DISCARD_INTERNAL_WRITES, ! !close);

        /* #3 */
        if (CHIP_IS_E1x(sc)) {
/* prevent interrupts from HC on both ports */
                val = REG_RD(sc, HC_REG_CONFIG_1);
                if (close)
                        REG_WR(sc, HC_REG_CONFIG_1, (val & ~(uint32_t)
                                                     HC_CONFIG_1_REG_BLOCK_DISABLE_1));
                else
                        REG_WR(sc, HC_REG_CONFIG_1,
                               (val | HC_CONFIG_1_REG_BLOCK_DISABLE_1));

                val = REG_RD(sc, HC_REG_CONFIG_0);
                if (close)
                        REG_WR(sc, HC_REG_CONFIG_0, (val & ~(uint32_t)
                                                     HC_CONFIG_0_REG_BLOCK_DISABLE_0));
                else
                        REG_WR(sc, HC_REG_CONFIG_0,
                               (val | HC_CONFIG_0_REG_BLOCK_DISABLE_0));

        } else {
/* Prevent incoming interrupts in IGU */
                val = REG_RD(sc, IGU_REG_BLOCK_CONFIGURATION);

                if (close)
                        REG_WR(sc, IGU_REG_BLOCK_CONFIGURATION,
                               (val & ~(uint32_t)
                                IGU_BLOCK_CONFIGURATION_REG_BLOCK_ENABLE));
                else
                        REG_WR(sc, IGU_REG_BLOCK_CONFIGURATION,
                               (val |
                                IGU_BLOCK_CONFIGURATION_REG_BLOCK_ENABLE));
        }

        wmb();
}

/* poll for pending writes bit, it should get cleared in no more than 1s */
static int bnx2x_er_poll_igu_vq(struct bnx2x_softc *sc)
{
        uint32_t cnt = 1000;
        uint32_t pend_bits = 0;

        do {
                pend_bits = REG_RD(sc, IGU_REG_PENDING_BITS_STATUS);

                if (pend_bits == 0) {
                        break;
                }

                DELAY(1000);
        } while (cnt-- > 0);

        if (cnt <= 0) {
                PMD_DRV_LOG(NOTICE, "Still pending IGU requests bits=0x%08x!",
                            pend_bits);
                return -1;
        }

        return 0;
}

#define SHARED_MF_CLP_MAGIC  0x80000000 /* 'magic' bit */

static void bnx2x_clp_reset_prep(struct bnx2x_softc *sc, uint32_t * magic_val)
{
        /* Do some magic... */
        uint32_t val = MFCFG_RD(sc, shared_mf_config.clp_mb);
        *magic_val = val & SHARED_MF_CLP_MAGIC;
        MFCFG_WR(sc, shared_mf_config.clp_mb, val | SHARED_MF_CLP_MAGIC);
}

/* restore the value of the 'magic' bit */
static void bnx2x_clp_reset_done(struct bnx2x_softc *sc, uint32_t magic_val)
{
        /* Restore the 'magic' bit value... */
        uint32_t val = MFCFG_RD(sc, shared_mf_config.clp_mb);
        MFCFG_WR(sc, shared_mf_config.clp_mb,
                 (val & (~SHARED_MF_CLP_MAGIC)) | magic_val);
}

/* prepare for MCP reset, takes care of CLP configurations */
static void bnx2x_reset_mcp_prep(struct bnx2x_softc *sc, uint32_t * magic_val)
{
        uint32_t shmem;
        uint32_t validity_offset;

        /* set `magic' bit in order to save MF config */
        bnx2x_clp_reset_prep(sc, magic_val);

        /* get shmem offset */
        shmem = REG_RD(sc, MISC_REG_SHARED_MEM_ADDR);
        validity_offset =
            offsetof(struct shmem_region, validity_map[SC_PORT(sc)]);

        /* Clear validity map flags */
        if (shmem > 0) {
                REG_WR(sc, shmem + validity_offset, 0);
        }
}

#define MCP_TIMEOUT      5000   /* 5 seconds (in ms) */
#define MCP_ONE_TIMEOUT  100    /* 100 ms */

static void bnx2x_mcp_wait_one(struct bnx2x_softc *sc)
{
        /* special handling for emulation and FPGA (10 times longer) */
        if (CHIP_REV_IS_SLOW(sc)) {
                DELAY((MCP_ONE_TIMEOUT * 10) * 1000);
        } else {
                DELAY((MCP_ONE_TIMEOUT) * 1000);
        }
}

/* initialize shmem_base and waits for validity signature to appear */
static int bnx2x_init_shmem(struct bnx2x_softc *sc)
{
        int cnt = 0;
        uint32_t val = 0;

        do {
                sc->devinfo.shmem_base =
                    sc->link_params.shmem_base =
                    REG_RD(sc, MISC_REG_SHARED_MEM_ADDR);

                if (sc->devinfo.shmem_base) {
                        val = SHMEM_RD(sc, validity_map[SC_PORT(sc)]);
                        if (val & SHR_MEM_VALIDITY_MB)
                                return 0;
                }

                bnx2x_mcp_wait_one(sc);

        } while (cnt++ < (MCP_TIMEOUT / MCP_ONE_TIMEOUT));

        PMD_DRV_LOG(NOTICE, "BAD MCP validity signature");

        return -1;
}

static int bnx2x_reset_mcp_comp(struct bnx2x_softc *sc, uint32_t magic_val)
{
        int rc = bnx2x_init_shmem(sc);

        /* Restore the `magic' bit value */
        bnx2x_clp_reset_done(sc, magic_val);

        return rc;
}

static void bnx2x_pxp_prep(struct bnx2x_softc *sc)
{
        REG_WR(sc, PXP2_REG_RD_START_INIT, 0);
        REG_WR(sc, PXP2_REG_RQ_RBC_DONE, 0);
        wmb();
}

/*
 * Reset the whole chip except for:
 *      - PCIE core
 *      - PCI Glue, PSWHST, PXP/PXP2 RF (all controlled by one reset bit)
 *      - IGU
 *      - MISC (including AEU)
 *      - GRC
 *      - RBCN, RBCP
 */
static void bnx2x_process_kill_chip_reset(struct bnx2x_softc *sc, uint8_t global)
{
        uint32_t not_reset_mask1, reset_mask1, not_reset_mask2, reset_mask2;
        uint32_t global_bits2, stay_reset2;

        /*
         * Bits that have to be set in reset_mask2 if we want to reset 'global'
         * (per chip) blocks.
         */
        global_bits2 =
            MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_CMN_CPU |
            MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_CMN_CORE;

        /*
         * Don't reset the following blocks.
         * Important: per port blocks (such as EMAC, BMAC, UMAC) can't be
         *            reset, as in 4 port device they might still be owned
         *            by the MCP (there is only one leader per path).
         */
        not_reset_mask1 =
            MISC_REGISTERS_RESET_REG_1_RST_HC |
            MISC_REGISTERS_RESET_REG_1_RST_PXPV |
            MISC_REGISTERS_RESET_REG_1_RST_PXP;

        not_reset_mask2 =
            MISC_REGISTERS_RESET_REG_2_RST_PCI_MDIO |
            MISC_REGISTERS_RESET_REG_2_RST_EMAC0_HARD_CORE |
            MISC_REGISTERS_RESET_REG_2_RST_EMAC1_HARD_CORE |
            MISC_REGISTERS_RESET_REG_2_RST_MISC_CORE |
            MISC_REGISTERS_RESET_REG_2_RST_RBCN |
            MISC_REGISTERS_RESET_REG_2_RST_GRC |
            MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_REG_HARD_CORE |
            MISC_REGISTERS_RESET_REG_2_RST_MCP_N_HARD_CORE_RST_B |
            MISC_REGISTERS_RESET_REG_2_RST_ATC |
            MISC_REGISTERS_RESET_REG_2_PGLC |
            MISC_REGISTERS_RESET_REG_2_RST_BMAC0 |
            MISC_REGISTERS_RESET_REG_2_RST_BMAC1 |
            MISC_REGISTERS_RESET_REG_2_RST_EMAC0 |
            MISC_REGISTERS_RESET_REG_2_RST_EMAC1 |
            MISC_REGISTERS_RESET_REG_2_UMAC0 | MISC_REGISTERS_RESET_REG_2_UMAC1;

        /*
         * Keep the following blocks in reset:
         *  - all xxMACs are handled by the elink code.
         */
        stay_reset2 =
            MISC_REGISTERS_RESET_REG_2_XMAC |
            MISC_REGISTERS_RESET_REG_2_XMAC_SOFT;

        /* Full reset masks according to the chip */
        reset_mask1 = 0xffffffff;

        if (CHIP_IS_E1H(sc))
                reset_mask2 = 0x1ffff;
        else if (CHIP_IS_E2(sc))
                reset_mask2 = 0xfffff;
        else                    /* CHIP_IS_E3 */
                reset_mask2 = 0x3ffffff;

        /* Don't reset global blocks unless we need to */
        if (!global)
                reset_mask2 &= ~global_bits2;

        /*
         * In case of attention in the QM, we need to reset PXP
         * (MISC_REGISTERS_RESET_REG_2_RST_PXP_RQ_RD_WR) before QM
         * because otherwise QM reset would release 'close the gates' shortly
         * before resetting the PXP, then the PSWRQ would send a write
         * request to PGLUE. Then when PXP is reset, PGLUE would try to
         * read the payload data from PSWWR, but PSWWR would not
         * respond. The write queue in PGLUE would stuck, dmae commands
         * would not return. Therefore it's important to reset the second
         * reset register (containing the
         * MISC_REGISTERS_RESET_REG_2_RST_PXP_RQ_RD_WR bit) before the
         * first one (containing the MISC_REGISTERS_RESET_REG_1_RST_QM
         * bit).
         */
        REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
               reset_mask2 & (~not_reset_mask2));

        REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR,
               reset_mask1 & (~not_reset_mask1));

        mb();
        wmb();

        REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET,
               reset_mask2 & (~stay_reset2));

        mb();
        wmb();

        REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, reset_mask1);
        wmb();
}

static int bnx2x_process_kill(struct bnx2x_softc *sc, uint8_t global)
{
        int cnt = 1000;
        uint32_t val = 0;
        uint32_t sr_cnt, blk_cnt, port_is_idle_0, port_is_idle_1, pgl_exp_rom2;
        uint32_t tags_63_32 = 0;

        /* Empty the Tetris buffer, wait for 1s */
        do {
                sr_cnt = REG_RD(sc, PXP2_REG_RD_SR_CNT);
                blk_cnt = REG_RD(sc, PXP2_REG_RD_BLK_CNT);
                port_is_idle_0 = REG_RD(sc, PXP2_REG_RD_PORT_IS_IDLE_0);
                port_is_idle_1 = REG_RD(sc, PXP2_REG_RD_PORT_IS_IDLE_1);
                pgl_exp_rom2 = REG_RD(sc, PXP2_REG_PGL_EXP_ROM2);
                if (CHIP_IS_E3(sc)) {
                        tags_63_32 = REG_RD(sc, PGLUE_B_REG_TAGS_63_32);
                }

                if ((sr_cnt == 0x7e) && (blk_cnt == 0xa0) &&
                    ((port_is_idle_0 & 0x1) == 0x1) &&
                    ((port_is_idle_1 & 0x1) == 0x1) &&
                    (pgl_exp_rom2 == 0xffffffff) &&
                    (!CHIP_IS_E3(sc) || (tags_63_32 == 0xffffffff)))
                        break;
                DELAY(1000);
        } while (cnt-- > 0);

        if (cnt <= 0) {
                PMD_DRV_LOG(NOTICE,
                            "ERROR: Tetris buffer didn't get empty or there "
                            "are still outstanding read requests after 1s! "
                            "sr_cnt=0x%08x, blk_cnt=0x%08x, port_is_idle_0=0x%08x, "
                            "port_is_idle_1=0x%08x, pgl_exp_rom2=0x%08x",
                            sr_cnt, blk_cnt, port_is_idle_0, port_is_idle_1,
                            pgl_exp_rom2);
                return -1;
        }

        mb();

        /* Close gates #2, #3 and #4 */
        bnx2x_set_234_gates(sc, TRUE);

        /* Poll for IGU VQs for 57712 and newer chips */
        if (!CHIP_IS_E1x(sc) && bnx2x_er_poll_igu_vq(sc)) {
                return -1;
        }

        /* clear "unprepared" bit */
        REG_WR(sc, MISC_REG_UNPREPARED, 0);
        mb();

        /* Make sure all is written to the chip before the reset */
        wmb();

        /*
         * Wait for 1ms to empty GLUE and PCI-E core queues,
         * PSWHST, GRC and PSWRD Tetris buffer.
         */
        DELAY(1000);

        /* Prepare to chip reset: */
        /* MCP */
        if (global) {
                bnx2x_reset_mcp_prep(sc, &val);
        }

        /* PXP */
        bnx2x_pxp_prep(sc);
        mb();

        /* reset the chip */
        bnx2x_process_kill_chip_reset(sc, global);
        mb();

        /* Recover after reset: */
        /* MCP */
        if (global && bnx2x_reset_mcp_comp(sc, val)) {
                return -1;
        }

        /* Open the gates #2, #3 and #4 */
        bnx2x_set_234_gates(sc, FALSE);

        return 0;
}

static int bnx2x_leader_reset(struct bnx2x_softc *sc)
{
        int rc = 0;
        uint8_t global = bnx2x_reset_is_global(sc);
        uint32_t load_code;

        /*
         * If not going to reset MCP, load "fake" driver to reset HW while
         * driver is owner of the HW.
         */
        if (!global && !BNX2X_NOMCP(sc)) {
                load_code = bnx2x_fw_command(sc, DRV_MSG_CODE_LOAD_REQ,
                                           DRV_MSG_CODE_LOAD_REQ_WITH_LFA);
                if (!load_code) {
                        PMD_DRV_LOG(NOTICE, "MCP response failure, aborting");
                        rc = -1;
                        goto exit_leader_reset;
                }

                if ((load_code != FW_MSG_CODE_DRV_LOAD_COMMON_CHIP) &&
                    (load_code != FW_MSG_CODE_DRV_LOAD_COMMON)) {
                        PMD_DRV_LOG(NOTICE,
                                    "MCP unexpected response, aborting");
                        rc = -1;
                        goto exit_leader_reset2;
                }

                load_code = bnx2x_fw_command(sc, DRV_MSG_CODE_LOAD_DONE, 0);
                if (!load_code) {
                        PMD_DRV_LOG(NOTICE, "MCP response failure, aborting");
                        rc = -1;
                        goto exit_leader_reset2;
                }
        }

        /* try to recover after the failure */
        if (bnx2x_process_kill(sc, global)) {
                PMD_DRV_LOG(NOTICE, "Something bad occurred on engine %d!",
                            SC_PATH(sc));
                rc = -1;
                goto exit_leader_reset2;
        }

        /*
         * Clear the RESET_IN_PROGRESS and RESET_GLOBAL bits and update the driver
         * state.
         */
        bnx2x_set_reset_done(sc);
        if (global) {
                bnx2x_clear_reset_global(sc);
        }

exit_leader_reset2:

        /* unload "fake driver" if it was loaded */
        if (!global &&!BNX2X_NOMCP(sc)) {
                bnx2x_fw_command(sc, DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP, 0);
                bnx2x_fw_command(sc, DRV_MSG_CODE_UNLOAD_DONE, 0);
        }

exit_leader_reset:

        sc->is_leader = 0;
        bnx2x_release_leader_lock(sc);

        mb();
        return rc;
}

/*
 * prepare INIT transition, parameters configured:
 *   - HC configuration
 *   - Queue's CDU context
 */
static void
bnx2x_pf_q_prep_init(struct bnx2x_softc *sc, struct bnx2x_fastpath *fp,
                   struct ecore_queue_init_params *init_params)
{
        uint8_t cos;
        int cxt_index, cxt_offset;

        bnx2x_set_bit(ECORE_Q_FLG_HC, &init_params->rx.flags);
        bnx2x_set_bit(ECORE_Q_FLG_HC, &init_params->tx.flags);

        bnx2x_set_bit(ECORE_Q_FLG_HC_EN, &init_params->rx.flags);
        bnx2x_set_bit(ECORE_Q_FLG_HC_EN, &init_params->tx.flags);

        /* HC rate */
        init_params->rx.hc_rate =
            sc->hc_rx_ticks ? (1000000 / sc->hc_rx_ticks) : 0;
        init_params->tx.hc_rate =
            sc->hc_tx_ticks ? (1000000 / sc->hc_tx_ticks) : 0;

        /* FW SB ID */
        init_params->rx.fw_sb_id = init_params->tx.fw_sb_id = fp->fw_sb_id;

        /* CQ index among the SB indices */
        init_params->rx.sb_cq_index = HC_INDEX_ETH_RX_CQ_CONS;
        init_params->tx.sb_cq_index = HC_INDEX_ETH_FIRST_TX_CQ_CONS;

        /* set maximum number of COSs supported by this queue */
        init_params->max_cos = sc->max_cos;

        /* set the context pointers queue object */
        for (cos = FIRST_TX_COS_INDEX; cos < init_params->max_cos; cos++) {
                cxt_index = fp->index / ILT_PAGE_CIDS;
                cxt_offset = fp->index - (cxt_index * ILT_PAGE_CIDS);
                init_params->cxts[cos] =
                    &sc->context[cxt_index].vcxt[cxt_offset].eth;
        }
}

/* set flags that are common for the Tx-only and not normal connections */
static unsigned long
bnx2x_get_common_flags(struct bnx2x_softc *sc, uint8_t zero_stats)
{
        unsigned long flags = 0;

        /* PF driver will always initialize the Queue to an ACTIVE state */
        bnx2x_set_bit(ECORE_Q_FLG_ACTIVE, &flags);

        /*
         * tx only connections collect statistics (on the same index as the
         * parent connection). The statistics are zeroed when the parent
         * connection is initialized.
         */

        bnx2x_set_bit(ECORE_Q_FLG_STATS, &flags);
        if (zero_stats) {
                bnx2x_set_bit(ECORE_Q_FLG_ZERO_STATS, &flags);
        }

        /*
         * tx only connections can support tx-switching, though their
         * CoS-ness doesn't survive the loopback
         */
        if (sc->flags & BNX2X_TX_SWITCHING) {
                bnx2x_set_bit(ECORE_Q_FLG_TX_SWITCH, &flags);
        }

        bnx2x_set_bit(ECORE_Q_FLG_PCSUM_ON_PKT, &flags);

        return flags;
}

static unsigned long bnx2x_get_q_flags(struct bnx2x_softc *sc, uint8_t leading)
{
        unsigned long flags = 0;

        if (IS_MF_SD(sc)) {
                bnx2x_set_bit(ECORE_Q_FLG_OV, &flags);
        }

        if (leading) {
                bnx2x_set_bit(ECORE_Q_FLG_LEADING_RSS, &flags);
                bnx2x_set_bit(ECORE_Q_FLG_MCAST, &flags);
        }

        bnx2x_set_bit(ECORE_Q_FLG_VLAN, &flags);

        /* merge with common flags */
        return flags | bnx2x_get_common_flags(sc, TRUE);
}

static void
bnx2x_pf_q_prep_general(struct bnx2x_softc *sc, struct bnx2x_fastpath *fp,
                      struct ecore_general_setup_params *gen_init, uint8_t cos)
{
        gen_init->stat_id = bnx2x_stats_id(fp);
        gen_init->spcl_id = fp->cl_id;
        gen_init->mtu = sc->mtu;
        gen_init->cos = cos;
}

static void
bnx2x_pf_rx_q_prep(struct bnx2x_softc *sc, struct bnx2x_fastpath *fp,
                 struct rxq_pause_params *pause,
                 struct ecore_rxq_setup_params *rxq_init)
{
        struct bnx2x_rx_queue *rxq;

        rxq = sc->rx_queues[fp->index];
        if (!rxq) {
                PMD_RX_LOG(ERR, "RX queue is NULL");
                return;
        }
        /* pause */
        pause->bd_th_lo = BD_TH_LO(sc);
        pause->bd_th_hi = BD_TH_HI(sc);

        pause->rcq_th_lo = RCQ_TH_LO(sc);
        pause->rcq_th_hi = RCQ_TH_HI(sc);

        /* validate rings have enough entries to cross high thresholds */
        if (sc->dropless_fc &&
            pause->bd_th_hi + FW_PREFETCH_CNT > sc->rx_ring_size) {
                PMD_DRV_LOG(WARNING, "rx bd ring threshold limit");
        }

        if (sc->dropless_fc &&
            pause->rcq_th_hi + FW_PREFETCH_CNT > USABLE_RCQ_ENTRIES(rxq)) {
                PMD_DRV_LOG(WARNING, "rcq ring threshold limit");
        }

        pause->pri_map = 1;

        /* rxq setup */
        rxq_init->dscr_map = (rte_iova_t)rxq->rx_ring_phys_addr;
        rxq_init->rcq_map = (rte_iova_t)rxq->cq_ring_phys_addr;
        rxq_init->rcq_np_map = (rte_iova_t)(rxq->cq_ring_phys_addr +
                                              BNX2X_PAGE_SIZE);

        /*
         * This should be a maximum number of data bytes that may be
         * placed on the BD (not including paddings).
         */
        rxq_init->buf_sz = (fp->rx_buf_size - IP_HEADER_ALIGNMENT_PADDING);

        rxq_init->cl_qzone_id = fp->cl_qzone_id;
        rxq_init->rss_engine_id = SC_FUNC(sc);
        rxq_init->mcast_engine_id = SC_FUNC(sc);

        rxq_init->cache_line_log = BNX2X_RX_ALIGN_SHIFT;
        rxq_init->fw_sb_id = fp->fw_sb_id;

        rxq_init->sb_cq_index = HC_INDEX_ETH_RX_CQ_CONS;

        /*
         * configure silent vlan removal
         * if multi function mode is afex, then mask default vlan
         */
        if (IS_MF_AFEX(sc)) {
                rxq_init->silent_removal_value =
                    sc->devinfo.mf_info.afex_def_vlan_tag;
                rxq_init->silent_removal_mask = EVL_VLID_MASK;
        }
}

static void
bnx2x_pf_tx_q_prep(struct bnx2x_softc *sc, struct bnx2x_fastpath *fp,
                 struct ecore_txq_setup_params *txq_init, uint8_t cos)
{
        struct bnx2x_tx_queue *txq = fp->sc->tx_queues[fp->index];

        if (!txq) {
                PMD_TX_LOG(ERR, "ERROR: TX queue is NULL");
                return;
        }
        txq_init->dscr_map = (rte_iova_t)txq->tx_ring_phys_addr;
        txq_init->sb_cq_index = HC_INDEX_ETH_FIRST_TX_CQ_CONS + cos;
        txq_init->traffic_type = LLFC_TRAFFIC_TYPE_NW;
        txq_init->fw_sb_id = fp->fw_sb_id;

        /*
         * set the TSS leading client id for TX classfication to the
         * leading RSS client id
         */
        txq_init->tss_leading_cl_id = BNX2X_FP(sc, 0, cl_id);
}

/*
 * This function performs 2 steps in a queue state machine:
 *   1) RESET->INIT
 *   2) INIT->SETUP
 */
static int
bnx2x_setup_queue(struct bnx2x_softc *sc, struct bnx2x_fastpath *fp, uint8_t leading)
{
        struct ecore_queue_state_params q_params = { NULL };
        struct ecore_queue_setup_params *setup_params = &q_params.params.setup;
        int rc;

        PMD_DRV_LOG(DEBUG, "setting up queue %d", fp->index);

        bnx2x_ack_sb(sc, fp->igu_sb_id, USTORM_ID, 0, IGU_INT_ENABLE, 0);

        q_params.q_obj = &BNX2X_SP_OBJ(sc, fp).q_obj;

        /* we want to wait for completion in this context */
        bnx2x_set_bit(RAMROD_COMP_WAIT, &q_params.ramrod_flags);

        /* prepare the INIT parameters */
        bnx2x_pf_q_prep_init(sc, fp, &q_params.params.init);

        /* Set the command */
        q_params.cmd = ECORE_Q_CMD_INIT;

        /* Change the state to INIT */
        rc = ecore_queue_state_change(sc, &q_params);
        if (rc) {
                PMD_DRV_LOG(NOTICE, "Queue(%d) INIT failed", fp->index);
                return rc;
        }

        PMD_DRV_LOG(DEBUG, "init complete");

        /* now move the Queue to the SETUP state */
        memset(setup_params, 0, sizeof(*setup_params));

        /* set Queue flags */
        setup_params->flags = bnx2x_get_q_flags(sc, leading);

        /* set general SETUP parameters */
        bnx2x_pf_q_prep_general(sc, fp, &setup_params->gen_params,
                              FIRST_TX_COS_INDEX);

        bnx2x_pf_rx_q_prep(sc, fp,
                         &setup_params->pause_params,
                         &setup_params->rxq_params);

        bnx2x_pf_tx_q_prep(sc, fp, &setup_params->txq_params, FIRST_TX_COS_INDEX);

        /* Set the command */
        q_params.cmd = ECORE_Q_CMD_SETUP;

        /* change the state to SETUP */
        rc = ecore_queue_state_change(sc, &q_params);
        if (rc) {
                PMD_DRV_LOG(NOTICE, "Queue(%d) SETUP failed", fp->index);
                return rc;
        }

        return rc;
}

static int bnx2x_setup_leading(struct bnx2x_softc *sc)
{
        if (IS_PF(sc))
                return bnx2x_setup_queue(sc, &sc->fp[0], TRUE);
        else                    /* VF */
                return bnx2x_vf_setup_queue(sc, &sc->fp[0], TRUE);
}

static int
bnx2x_config_rss_pf(struct bnx2x_softc *sc, struct ecore_rss_config_obj *rss_obj,
                  uint8_t config_hash)
{
        struct ecore_config_rss_params params = { NULL };
        uint32_t i;

        /*
         * Although RSS is meaningless when there is a single HW queue we
         * still need it enabled in order to have HW Rx hash generated.
         */

        params.rss_obj = rss_obj;

        bnx2x_set_bit(RAMROD_COMP_WAIT, &params.ramrod_flags);

        bnx2x_set_bit(ECORE_RSS_MODE_REGULAR, &params.rss_flags);

        /* RSS configuration */
        bnx2x_set_bit(ECORE_RSS_IPV4, &params.rss_flags);
        bnx2x_set_bit(ECORE_RSS_IPV4_TCP, &params.rss_flags);
        bnx2x_set_bit(ECORE_RSS_IPV6, &params.rss_flags);
        bnx2x_set_bit(ECORE_RSS_IPV6_TCP, &params.rss_flags);
        if (rss_obj->udp_rss_v4) {
                bnx2x_set_bit(ECORE_RSS_IPV4_UDP, &params.rss_flags);
        }
        if (rss_obj->udp_rss_v6) {
                bnx2x_set_bit(ECORE_RSS_IPV6_UDP, &params.rss_flags);
        }

        /* Hash bits */
        params.rss_result_mask = MULTI_MASK;

        rte_memcpy(params.ind_table, rss_obj->ind_table,
                         sizeof(params.ind_table));

        if (config_hash) {
/* RSS keys */
                for (i = 0; i < sizeof(params.rss_key) / 4; i++) {
                        params.rss_key[i] = (uint32_t) rte_rand();
                }

                bnx2x_set_bit(ECORE_RSS_SET_SRCH, &params.rss_flags);
        }

        if (IS_PF(sc))
                return ecore_config_rss(sc, &params);
        else
                return bnx2x_vf_config_rss(sc, &params);
}

static int bnx2x_config_rss_eth(struct bnx2x_softc *sc, uint8_t config_hash)
{
        return bnx2x_config_rss_pf(sc, &sc->rss_conf_obj, config_hash);
}

static int bnx2x_init_rss_pf(struct bnx2x_softc *sc)
{
        uint8_t num_eth_queues = BNX2X_NUM_ETH_QUEUES(sc);
        uint32_t i;

        /*
         * Prepare the initial contents of the indirection table if
         * RSS is enabled
         */
        for (i = 0; i < sizeof(sc->rss_conf_obj.ind_table); i++) {
                sc->rss_conf_obj.ind_table[i] =
                    (sc->fp->cl_id + (i % num_eth_queues));
        }

        if (sc->udp_rss) {
                sc->rss_conf_obj.udp_rss_v4 = sc->rss_conf_obj.udp_rss_v6 = 1;
        }

        /*
         * For 57711 SEARCHER configuration (rss_keys) is
         * per-port, so if explicit configuration is needed, do it only
         * for a PMF.
         *
         * For 57712 and newer it's a per-function configuration.
         */
        return bnx2x_config_rss_eth(sc, sc->port.pmf || !CHIP_IS_E1x(sc));
}

static int
bnx2x_set_mac_one(struct bnx2x_softc *sc, uint8_t * mac,
                struct ecore_vlan_mac_obj *obj, uint8_t set, int mac_type,
                unsigned long *ramrod_flags)
{
        struct ecore_vlan_mac_ramrod_params ramrod_param;
        int rc;

        memset(&ramrod_param, 0, sizeof(ramrod_param));

        /* fill in general parameters */
        ramrod_param.vlan_mac_obj = obj;
        ramrod_param.ramrod_flags = *ramrod_flags;

        /* fill a user request section if needed */
        if (!bnx2x_test_bit(RAMROD_CONT, ramrod_flags)) {
                rte_memcpy(ramrod_param.user_req.u.mac.mac, mac,
                                 ETH_ALEN);

                bnx2x_set_bit(mac_type, &ramrod_param.user_req.vlan_mac_flags);

/* Set the command: ADD or DEL */
                ramrod_param.user_req.cmd = (set) ? ECORE_VLAN_MAC_ADD :
                    ECORE_VLAN_MAC_DEL;
        }

        rc = ecore_config_vlan_mac(sc, &ramrod_param);

        if (rc == ECORE_EXISTS) {
                PMD_DRV_LOG(INFO, "Failed to schedule ADD operations (EEXIST)");
/* do not treat adding same MAC as error */
                rc = 0;
        } else if (rc < 0) {
                PMD_DRV_LOG(ERR,
                            "%s MAC failed (%d)", (set ? "Set" : "Delete"), rc);
        }

        return rc;
}

static int bnx2x_set_eth_mac(struct bnx2x_softc *sc, uint8_t set)
{
        unsigned long ramrod_flags = 0;

        PMD_DRV_LOG(DEBUG, "Adding Ethernet MAC");

        bnx2x_set_bit(RAMROD_COMP_WAIT, &ramrod_flags);

        /* Eth MAC is set on RSS leading client (fp[0]) */
        return bnx2x_set_mac_one(sc, sc->link_params.mac_addr,
                               &sc->sp_objs->mac_obj,
                               set, ECORE_ETH_MAC, &ramrod_flags);
}

static int bnx2x_get_cur_phy_idx(struct bnx2x_softc *sc)
{
        uint32_t sel_phy_idx = 0;

        if (sc->link_params.num_phys <= 1) {
                return ELINK_INT_PHY;
        }

        if (sc->link_vars.link_up) {
                sel_phy_idx = ELINK_EXT_PHY1;
/* In case link is SERDES, check if the ELINK_EXT_PHY2 is the one */
                if ((sc->link_vars.link_status & LINK_STATUS_SERDES_LINK) &&
                    (sc->link_params.phy[ELINK_EXT_PHY2].supported &
                     ELINK_SUPPORTED_FIBRE))
                        sel_phy_idx = ELINK_EXT_PHY2;
        } else {
                switch (elink_phy_selection(&sc->link_params)) {
                case PORT_HW_CFG_PHY_SELECTION_HARDWARE_DEFAULT:
                case PORT_HW_CFG_PHY_SELECTION_FIRST_PHY:
                case PORT_HW_CFG_PHY_SELECTION_FIRST_PHY_PRIORITY:
                        sel_phy_idx = ELINK_EXT_PHY1;
                        break;
                case PORT_HW_CFG_PHY_SELECTION_SECOND_PHY:
                case PORT_HW_CFG_PHY_SELECTION_SECOND_PHY_PRIORITY:
                        sel_phy_idx = ELINK_EXT_PHY2;
                        break;
                }
        }

        return sel_phy_idx;
}

static int bnx2x_get_link_cfg_idx(struct bnx2x_softc *sc)
{
        uint32_t sel_phy_idx = bnx2x_get_cur_phy_idx(sc);

        /*
         * The selected activated PHY is always after swapping (in case PHY
         * swapping is enabled). So when swapping is enabled, we need to reverse
         * the configuration
         */

        if (sc->link_params.multi_phy_config & PORT_HW_CFG_PHY_SWAPPED_ENABLED) {
                if (sel_phy_idx == ELINK_EXT_PHY1)
                        sel_phy_idx = ELINK_EXT_PHY2;
                else if (sel_phy_idx == ELINK_EXT_PHY2)
                        sel_phy_idx = ELINK_EXT_PHY1;
        }

        return ELINK_LINK_CONFIG_IDX(sel_phy_idx);
}

static void bnx2x_set_requested_fc(struct bnx2x_softc *sc)
{
        /*
         * Initialize link parameters structure variables
         * It is recommended to turn off RX FC for jumbo frames
         * for better performance
         */
        if (CHIP_IS_E1x(sc) && (sc->mtu > 5000)) {
                sc->link_params.req_fc_auto_adv = ELINK_FLOW_CTRL_TX;
        } else {
                sc->link_params.req_fc_auto_adv = ELINK_FLOW_CTRL_BOTH;
        }
}

static void bnx2x_calc_fc_adv(struct bnx2x_softc *sc)
{
        uint8_t cfg_idx = bnx2x_get_link_cfg_idx(sc);
        switch (sc->link_vars.ieee_fc &
                MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK) {
        case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE:
        default:
                sc->port.advertising[cfg_idx] &= ~(ADVERTISED_Asym_Pause |
                                                   ADVERTISED_Pause);
                break;

        case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH:
                sc->port.advertising[cfg_idx] |= (ADVERTISED_Asym_Pause |
                                                  ADVERTISED_Pause);
                break;

        case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC:
                sc->port.advertising[cfg_idx] |= ADVERTISED_Asym_Pause;
                break;
        }
}

static uint16_t bnx2x_get_mf_speed(struct bnx2x_softc *sc)
{
        uint16_t line_speed = sc->link_vars.line_speed;
        if (IS_MF(sc)) {
                uint16_t maxCfg = bnx2x_extract_max_cfg(sc,
                                                      sc->devinfo.
                                                      mf_info.mf_config[SC_VN
                                                                        (sc)]);

/* calculate the current MAX line speed limit for the MF devices */
                if (IS_MF_SI(sc)) {
                        line_speed = (line_speed * maxCfg) / 100;
                } else {        /* SD mode */
                        uint16_t vn_max_rate = maxCfg * 100;

                        if (vn_max_rate < line_speed) {
                                line_speed = vn_max_rate;
                        }
                }
        }

        return line_speed;
}

static void
bnx2x_fill_report_data(struct bnx2x_softc *sc, struct bnx2x_link_report_data *data)
{
        uint16_t line_speed = bnx2x_get_mf_speed(sc);

        memset(data, 0, sizeof(*data));

        /* fill the report data with the effective line speed */
        data->line_speed = line_speed;

        /* Link is down */
        if (!sc->link_vars.link_up || (sc->flags & BNX2X_MF_FUNC_DIS)) {
                bnx2x_set_bit(BNX2X_LINK_REPORT_LINK_DOWN,
                            &data->link_report_flags);
        }

        /* Full DUPLEX */
        if (sc->link_vars.duplex == DUPLEX_FULL) {
                bnx2x_set_bit(BNX2X_LINK_REPORT_FULL_DUPLEX,
                            &data->link_report_flags);
        }

        /* Rx Flow Control is ON */
        if (sc->link_vars.flow_ctrl & ELINK_FLOW_CTRL_RX) {
                bnx2x_set_bit(BNX2X_LINK_REPORT_RX_FC_ON, &data->link_report_flags);
        }

        /* Tx Flow Control is ON */
        if (sc->link_vars.flow_ctrl & ELINK_FLOW_CTRL_TX) {
                bnx2x_set_bit(BNX2X_LINK_REPORT_TX_FC_ON, &data->link_report_flags);
        }
}

/* report link status to OS, should be called under phy_lock */
static void bnx2x_link_report(struct bnx2x_softc *sc)
{
        struct bnx2x_link_report_data cur_data;

        /* reread mf_cfg */
        if (IS_PF(sc)) {
                bnx2x_read_mf_cfg(sc);
        }

        /* Read the current link report info */
        bnx2x_fill_report_data(sc, &cur_data);

        /* Don't report link down or exactly the same link status twice */
        if (!memcmp(&cur_data, &sc->last_reported_link, sizeof(cur_data)) ||
            (bnx2x_test_bit(BNX2X_LINK_REPORT_LINK_DOWN,
                          &sc->last_reported_link.link_report_flags) &&
             bnx2x_test_bit(BNX2X_LINK_REPORT_LINK_DOWN,
                          &cur_data.link_report_flags))) {
                return;
        }

        sc->link_cnt++;

        /* report new link params and remember the state for the next time */
        rte_memcpy(&sc->last_reported_link, &cur_data, sizeof(cur_data));

        if (bnx2x_test_bit(BNX2X_LINK_REPORT_LINK_DOWN,
                         &cur_data.link_report_flags)) {
                PMD_DRV_LOG(INFO, "NIC Link is Down");
        } else {
                __rte_unused const char *duplex;
                __rte_unused const char *flow;

                if (bnx2x_test_and_clear_bit(BNX2X_LINK_REPORT_FULL_DUPLEX,
                                           &cur_data.link_report_flags)) {
                        duplex = "full";
                } else {
                        duplex = "half";
                }

/*
 * Handle the FC at the end so that only these flags would be
 * possibly set. This way we may easily check if there is no FC
 * enabled.
 */
                if (cur_data.link_report_flags) {
                        if (bnx2x_test_bit(BNX2X_LINK_REPORT_RX_FC_ON,
                                         &cur_data.link_report_flags) &&
                            bnx2x_test_bit(BNX2X_LINK_REPORT_TX_FC_ON,
                                         &cur_data.link_report_flags)) {
                                flow = "ON - receive & transmit";
                        } else if (bnx2x_test_bit(BNX2X_LINK_REPORT_RX_FC_ON,
                                                &cur_data.link_report_flags) &&
                                   !bnx2x_test_bit(BNX2X_LINK_REPORT_TX_FC_ON,
                                                 &cur_data.link_report_flags)) {
                                flow = "ON - receive";
                        } else if (!bnx2x_test_bit(BNX2X_LINK_REPORT_RX_FC_ON,
                                                 &cur_data.link_report_flags) &&
                                   bnx2x_test_bit(BNX2X_LINK_REPORT_TX_FC_ON,
                                                &cur_data.link_report_flags)) {
                                flow = "ON - transmit";
                        } else {
                                flow = "none";  /* possible? */
                        }
                } else {
                        flow = "none";
                }

                PMD_DRV_LOG(INFO,
                            "NIC Link is Up, %d Mbps %s duplex, Flow control: %s",
                            cur_data.line_speed, duplex, flow);
        }
}

void bnx2x_link_status_update(struct bnx2x_softc *sc)
{
        if (sc->state != BNX2X_STATE_OPEN) {
                return;
        }

        if (IS_PF(sc) && !CHIP_REV_IS_SLOW(sc)) {
                elink_link_status_update(&sc->link_params, &sc->link_vars);
        } else {
                sc->port.supported[0] |= (ELINK_SUPPORTED_10baseT_Half |
                                          ELINK_SUPPORTED_10baseT_Full |
                                          ELINK_SUPPORTED_100baseT_Half |
                                          ELINK_SUPPORTED_100baseT_Full |
                                          ELINK_SUPPORTED_1000baseT_Full |
                                          ELINK_SUPPORTED_2500baseX_Full |
                                          ELINK_SUPPORTED_10000baseT_Full |
                                          ELINK_SUPPORTED_TP |
                                          ELINK_SUPPORTED_FIBRE |
                                          ELINK_SUPPORTED_Autoneg |
                                          ELINK_SUPPORTED_Pause |
                                          ELINK_SUPPORTED_Asym_Pause);
                sc->port.advertising[0] = sc->port.supported[0];

                sc->link_params.sc = sc;
                sc->link_params.port = SC_PORT(sc);
                sc->link_params.req_duplex[0] = DUPLEX_FULL;
                sc->link_params.req_flow_ctrl[0] = ELINK_FLOW_CTRL_NONE;
                sc->link_params.req_line_speed[0] = SPEED_10000;
                sc->link_params.speed_cap_mask[0] = 0x7f0000;
                sc->link_params.switch_cfg = ELINK_SWITCH_CFG_10G;

                if (CHIP_REV_IS_FPGA(sc)) {
                        sc->link_vars.mac_type = ELINK_MAC_TYPE_EMAC;
                        sc->link_vars.line_speed = ELINK_SPEED_1000;
                        sc->link_vars.link_status = (LINK_STATUS_LINK_UP |
                                                     LINK_STATUS_SPEED_AND_DUPLEX_1000TFD);
                } else {
                        sc->link_vars.mac_type = ELINK_MAC_TYPE_BMAC;
                        sc->link_vars.line_speed = ELINK_SPEED_10000;
                        sc->link_vars.link_status = (LINK_STATUS_LINK_UP |
                                                     LINK_STATUS_SPEED_AND_DUPLEX_10GTFD);
                }

                sc->link_vars.link_up = 1;

                sc->link_vars.duplex = DUPLEX_FULL;
                sc->link_vars.flow_ctrl = ELINK_FLOW_CTRL_NONE;

                if (IS_PF(sc)) {
                        REG_WR(sc,
                               NIG_REG_EGRESS_DRAIN0_MODE +
                               sc->link_params.port * 4, 0);
                        bnx2x_stats_handle(sc, STATS_EVENT_LINK_UP);
                        bnx2x_link_report(sc);
                }
        }

        if (IS_PF(sc)) {
                if (sc->link_vars.link_up) {
                        bnx2x_stats_handle(sc, STATS_EVENT_LINK_UP);
                } else {
                        bnx2x_stats_handle(sc, STATS_EVENT_STOP);
                }
                bnx2x_link_report(sc);
        } else {
                bnx2x_link_report(sc);
                bnx2x_stats_handle(sc, STATS_EVENT_LINK_UP);
        }
}

static int bnx2x_initial_phy_init(struct bnx2x_softc *sc, int load_mode)
{
        int rc, cfg_idx = bnx2x_get_link_cfg_idx(sc);
        uint16_t req_line_speed = sc->link_params.req_line_speed[cfg_idx];
        struct elink_params *lp = &sc->link_params;

        bnx2x_set_requested_fc(sc);

        if (load_mode == LOAD_DIAG) {
                lp->loopback_mode = ELINK_LOOPBACK_XGXS;
/* Prefer doing PHY loopback at 10G speed, if possible */
                if (lp->req_line_speed[cfg_idx] < ELINK_SPEED_10000) {
                        if (lp->speed_cap_mask[cfg_idx] &
                            PORT_HW_CFG_SPEED_CAPABILITY_D0_10G) {
                                lp->req_line_speed[cfg_idx] = ELINK_SPEED_10000;
                        } else {
                                lp->req_line_speed[cfg_idx] = ELINK_SPEED_1000;
                        }
                }
        }

        if (load_mode == LOAD_LOOPBACK_EXT) {
                lp->loopback_mode = ELINK_LOOPBACK_EXT;
        }

        rc = elink_phy_init(&sc->link_params, &sc->link_vars);

        bnx2x_calc_fc_adv(sc);

        if (sc->link_vars.link_up) {
                bnx2x_stats_handle(sc, STATS_EVENT_LINK_UP);
                bnx2x_link_report(sc);
        }

        sc->link_params.req_line_speed[cfg_idx] = req_line_speed;
        return rc;
}

/* update flags in shmem */
static void
bnx2x_update_drv_flags(struct bnx2x_softc *sc, uint32_t flags, uint32_t set)
{
        uint32_t drv_flags;

        if (SHMEM2_HAS(sc, drv_flags)) {
                bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_DRV_FLAGS);
                drv_flags = SHMEM2_RD(sc, drv_flags);

                if (set) {
                        drv_flags |= flags;
                } else {
                        drv_flags &= ~flags;
                }

                SHMEM2_WR(sc, drv_flags, drv_flags);

                bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_DRV_FLAGS);
        }
}

/* periodic timer callout routine, only runs when the interface is up */
void bnx2x_periodic_callout(struct bnx2x_softc *sc)
{
        if ((sc->state != BNX2X_STATE_OPEN) ||
            (atomic_load_acq_long(&sc->periodic_flags) == PERIODIC_STOP)) {
                PMD_DRV_LOG(WARNING, "periodic callout exit (state=0x%x)",
                            sc->state);
                return;
        }
        if (!CHIP_REV_IS_SLOW(sc)) {
/*
 * This barrier is needed to ensure the ordering between the writing
 * to the sc->port.pmf in the bnx2x_nic_load() or bnx2x_pmf_update() and
 * the reading here.
 */
                mb();
                if (sc->port.pmf) {
                        elink_period_func(&sc->link_params, &sc->link_vars);
                }
        }
#ifdef BNX2X_PULSE
        if (IS_PF(sc) && !BNX2X_NOMCP(sc)) {
                int mb_idx = SC_FW_MB_IDX(sc);
                uint32_t drv_pulse;
                uint32_t mcp_pulse;

                ++sc->fw_drv_pulse_wr_seq;
                sc->fw_drv_pulse_wr_seq &= DRV_PULSE_SEQ_MASK;

                drv_pulse = sc->fw_drv_pulse_wr_seq;
                bnx2x_drv_pulse(sc);

                mcp_pulse = (SHMEM_RD(sc, func_mb[mb_idx].mcp_pulse_mb) &
                             MCP_PULSE_SEQ_MASK);

/*
 * The delta between driver pulse and mcp response should
 * be 1 (before mcp response) or 0 (after mcp response).
 */
                if ((drv_pulse != mcp_pulse) &&
                    (drv_pulse != ((mcp_pulse + 1) & MCP_PULSE_SEQ_MASK))) {
                        /* someone lost a heartbeat... */
                        PMD_DRV_LOG(ERR,
                                    "drv_pulse (0x%x) != mcp_pulse (0x%x)",
                                    drv_pulse, mcp_pulse);
                }
        }
#endif
}

/* start the controller */
static __rte_noinline
int bnx2x_nic_load(struct bnx2x_softc *sc)
{
        uint32_t val;
        uint32_t load_code = 0;
        int i, rc = 0;

        PMD_INIT_FUNC_TRACE();

        sc->state = BNX2X_STATE_OPENING_WAITING_LOAD;

        if (IS_PF(sc)) {
/* must be called before memory allocation and HW init */
                bnx2x_ilt_set_info(sc);
        }

        bnx2x_set_fp_rx_buf_size(sc);

        if (IS_PF(sc)) {
                if (bnx2x_alloc_mem(sc) != 0) {
                        sc->state = BNX2X_STATE_CLOSED;
                        rc = -ENOMEM;
                        goto bnx2x_nic_load_error0;
                }
        }

        if (bnx2x_alloc_fw_stats_mem(sc) != 0) {
                sc->state = BNX2X_STATE_CLOSED;
                rc = -ENOMEM;
                goto bnx2x_nic_load_error0;
        }

        if (IS_VF(sc)) {
                rc = bnx2x_vf_init(sc);
                if (rc) {
                        sc->state = BNX2X_STATE_ERROR;
                        goto bnx2x_nic_load_error0;
                }
        }

        if (IS_PF(sc)) {
/* set pf load just before approaching the MCP */
                bnx2x_set_pf_load(sc);

/* if MCP exists send load request and analyze response */
                if (!BNX2X_NOMCP(sc)) {
                        /* attempt to load pf */
                        if (bnx2x_nic_load_request(sc, &load_code) != 0) {
                                sc->state = BNX2X_STATE_CLOSED;
                                rc = -ENXIO;
                                goto bnx2x_nic_load_error1;
                        }

                        /* what did the MCP say? */
                        if (bnx2x_nic_load_analyze_req(sc, load_code) != 0) {
                                bnx2x_fw_command(sc, DRV_MSG_CODE_LOAD_DONE, 0);
                                sc->state = BNX2X_STATE_CLOSED;
                                rc = -ENXIO;
                                goto bnx2x_nic_load_error2;
                        }
                } else {
                        PMD_DRV_LOG(INFO, "Device has no MCP!");
                        load_code = bnx2x_nic_load_no_mcp(sc);
                }

/* mark PMF if applicable */
                bnx2x_nic_load_pmf(sc, load_code);

/* Init Function state controlling object */
                bnx2x_init_func_obj(sc);

/* Initialize HW */
                if (bnx2x_init_hw(sc, load_code) != 0) {
                        PMD_DRV_LOG(NOTICE, "HW init failed");
                        bnx2x_fw_command(sc, DRV_MSG_CODE_LOAD_DONE, 0);
                        sc->state = BNX2X_STATE_CLOSED;
                        rc = -ENXIO;
                        goto bnx2x_nic_load_error2;
                }
        }

        bnx2x_nic_init(sc, load_code);

        /* Init per-function objects */
        if (IS_PF(sc)) {
                bnx2x_init_objs(sc);

/* set AFEX default VLAN tag to an invalid value */
                sc->devinfo.mf_info.afex_def_vlan_tag = -1;

                sc->state = BNX2X_STATE_OPENING_WAITING_PORT;
                rc = bnx2x_func_start(sc);
                if (rc) {
                        PMD_DRV_LOG(NOTICE, "Function start failed!");
                        bnx2x_fw_command(sc, DRV_MSG_CODE_LOAD_DONE, 0);
                        sc->state = BNX2X_STATE_ERROR;
                        goto bnx2x_nic_load_error3;
                }

/* send LOAD_DONE command to MCP */
                if (!BNX2X_NOMCP(sc)) {
                        load_code =
                            bnx2x_fw_command(sc, DRV_MSG_CODE_LOAD_DONE, 0);
                        if (!load_code) {
                                PMD_DRV_LOG(NOTICE,
                                            "MCP response failure, aborting");
                                sc->state = BNX2X_STATE_ERROR;
                                rc = -ENXIO;
                                goto bnx2x_nic_load_error3;
                        }
                }
        }

        rc = bnx2x_setup_leading(sc);
        if (rc) {
                PMD_DRV_LOG(NOTICE, "Setup leading failed!");
                sc->state = BNX2X_STATE_ERROR;
                goto bnx2x_nic_load_error3;
        }

        FOR_EACH_NONDEFAULT_ETH_QUEUE(sc, i) {
                if (IS_PF(sc))
                        rc = bnx2x_setup_queue(sc, &sc->fp[i], FALSE);
                else            /* IS_VF(sc) */
                        rc = bnx2x_vf_setup_queue(sc, &sc->fp[i], FALSE);

                if (rc) {
                        PMD_DRV_LOG(NOTICE, "Queue(%d) setup failed", i);
                        sc->state = BNX2X_STATE_ERROR;
                        goto bnx2x_nic_load_error3;
                }
        }

        rc = bnx2x_init_rss_pf(sc);
        if (rc) {
                PMD_DRV_LOG(NOTICE, "PF RSS init failed");
                sc->state = BNX2X_STATE_ERROR;
                goto bnx2x_nic_load_error3;
        }

        /* now when Clients are configured we are ready to work */
        sc->state = BNX2X_STATE_OPEN;

        /* Configure a ucast MAC */
        if (IS_PF(sc)) {
                rc = bnx2x_set_eth_mac(sc, TRUE);
        } else {                /* IS_VF(sc) */
                rc = bnx2x_vf_set_mac(sc, TRUE);
        }

        if (rc) {
                PMD_DRV_LOG(NOTICE, "Setting Ethernet MAC failed");
                sc->state = BNX2X_STATE_ERROR;
                goto bnx2x_nic_load_error3;
        }

        if (sc->port.pmf) {
                rc = bnx2x_initial_phy_init(sc, LOAD_OPEN);
                if (rc) {
                        sc->state = BNX2X_STATE_ERROR;
                        goto bnx2x_nic_load_error3;
                }
        }

        sc->link_params.feature_config_flags &=
            ~ELINK_FEATURE_CONFIG_BOOT_FROM_SAN;

        /* start the Tx */
        switch (LOAD_OPEN) {
        case LOAD_NORMAL:
        case LOAD_OPEN:
                break;

        case LOAD_DIAG:
        case LOAD_LOOPBACK_EXT:
                sc->state = BNX2X_STATE_DIAG;
                break;

        default:
                break;
        }

        if (sc->port.pmf) {
                bnx2x_update_drv_flags(sc, 1 << DRV_FLAGS_PORT_MASK, 0);
        } else {
                bnx2x_link_status_update(sc);
        }

        if (IS_PF(sc) && SHMEM2_HAS(sc, drv_capabilities_flag)) {
/* mark driver is loaded in shmem2 */
                val = SHMEM2_RD(sc, drv_capabilities_flag[SC_FW_MB_IDX(sc)]);
                SHMEM2_WR(sc, drv_capabilities_flag[SC_FW_MB_IDX(sc)],
                          (val |
                           DRV_FLAGS_CAPABILITIES_LOADED_SUPPORTED |
                           DRV_FLAGS_CAPABILITIES_LOADED_L2));
        }

        /* start fast path */
        /* Initialize Rx filter */
        bnx2x_set_rx_mode(sc);

        /* wait for all pending SP commands to complete */
        if (IS_PF(sc) && !bnx2x_wait_sp_comp(sc, ~0x0UL)) {
                PMD_DRV_LOG(NOTICE, "Timeout waiting for all SPs to complete!");
                bnx2x_periodic_stop(sc);
                bnx2x_nic_unload(sc, UNLOAD_CLOSE, FALSE);
                return -ENXIO;
        }

        PMD_DRV_LOG(DEBUG, "NIC successfully loaded");

        return 0;

bnx2x_nic_load_error3:

        if (IS_PF(sc)) {
                bnx2x_int_disable_sync(sc, 1);

/* clean out queued objects */
                bnx2x_squeeze_objects(sc);
        }

bnx2x_nic_load_error2:

        if (IS_PF(sc) && !BNX2X_NOMCP(sc)) {
                bnx2x_fw_command(sc, DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP, 0);
                bnx2x_fw_command(sc, DRV_MSG_CODE_UNLOAD_DONE, 0);
        }

        sc->port.pmf = 0;

bnx2x_nic_load_error1:

        /* clear pf_load status, as it was already set */
        if (IS_PF(sc)) {
                bnx2x_clear_pf_load(sc);
        }

bnx2x_nic_load_error0:

        bnx2x_free_fw_stats_mem(sc);
        bnx2x_free_mem(sc);

        return rc;
}

/*
* Handles controller initialization.
*/
int bnx2x_init(struct bnx2x_softc *sc)
{
        int other_engine = SC_PATH(sc) ? 0 : 1;
        uint8_t other_load_status, load_status;
        uint8_t global = FALSE;
        int rc;

        /* Check if the driver is still running and bail out if it is. */
        if (sc->state != BNX2X_STATE_CLOSED) {
                PMD_DRV_LOG(DEBUG, "Init called while driver is running!");
                rc = 0;
                goto bnx2x_init_done;
        }

        bnx2x_set_power_state(sc, PCI_PM_D0);

        /*
         * If parity occurred during the unload, then attentions and/or
         * RECOVERY_IN_PROGRESS may still be set. If so we want the first function
         * loaded on the current engine to complete the recovery. Parity recovery
         * is only relevant for PF driver.
         */
        if (IS_PF(sc)) {
                other_load_status = bnx2x_get_load_status(sc, other_engine);
                load_status = bnx2x_get_load_status(sc, SC_PATH(sc));

                if (!bnx2x_reset_is_done(sc, SC_PATH(sc)) ||
                    bnx2x_chk_parity_attn(sc, &global, TRUE)) {
                        do {
                                /*
                                 * If there are attentions and they are in global blocks, set
                                 * the GLOBAL_RESET bit regardless whether it will be this
                                 * function that will complete the recovery or not.
                                 */
                                if (global) {
                                        bnx2x_set_reset_global(sc);
                                }

                                /*
                                 * Only the first function on the current engine should try
                                 * to recover in open. In case of attentions in global blocks
                                 * only the first in the chip should try to recover.
                                 */
                                if ((!load_status
                                     && (!global ||!other_load_status))
                                    && bnx2x_trylock_leader_lock(sc)
                                    && !bnx2x_leader_reset(sc)) {
                                        PMD_DRV_LOG(INFO,
                                                    "Recovered during init");
                                        break;
                                }

                                /* recovery has failed... */
                                bnx2x_set_power_state(sc, PCI_PM_D3hot);

                                sc->recovery_state = BNX2X_RECOVERY_FAILED;

                                PMD_DRV_LOG(NOTICE,
                                            "Recovery flow hasn't properly "
                                            "completed yet, try again later. "
                                            "If you still see this message after a "
                                            "few retries then power cycle is required.");

                                rc = -ENXIO;
                                goto bnx2x_init_done;
                        } while (0);
                }
        }

        sc->recovery_state = BNX2X_RECOVERY_DONE;

        rc = bnx2x_nic_load(sc);

bnx2x_init_done:

        if (rc) {
                PMD_DRV_LOG(NOTICE, "Initialization failed, "
                            "stack notified driver is NOT running!");
        }

        return rc;
}

static void bnx2x_get_function_num(struct bnx2x_softc *sc)
{
        uint32_t val = 0;

        /*
         * Read the ME register to get the function number. The ME register
         * holds the relative-function number and absolute-function number. The
         * absolute-function number appears only in E2 and above. Before that
         * these bits always contained zero, therefore we cannot blindly use them.
         */

        val = REG_RD(sc, BAR_ME_REGISTER);

        sc->pfunc_rel =
            (uint8_t) ((val & ME_REG_PF_NUM) >> ME_REG_PF_NUM_SHIFT);
        sc->path_id =
            (uint8_t) ((val & ME_REG_ABS_PF_NUM) >> ME_REG_ABS_PF_NUM_SHIFT) &
            1;

        if (CHIP_PORT_MODE(sc) == CHIP_4_PORT_MODE) {
                sc->pfunc_abs = ((sc->pfunc_rel << 1) | sc->path_id);
        } else {
                sc->pfunc_abs = (sc->pfunc_rel | sc->path_id);
        }

        PMD_DRV_LOG(DEBUG,
                    "Relative function %d, Absolute function %d, Path %d",
                    sc->pfunc_rel, sc->pfunc_abs, sc->path_id);
}

static uint32_t bnx2x_get_shmem_mf_cfg_base(struct bnx2x_softc *sc)
{
        uint32_t shmem2_size;
        uint32_t offset;
        uint32_t mf_cfg_offset_value;

        /* Non 57712 */
        offset = (SHMEM_ADDR(sc, func_mb) +
                  (MAX_FUNC_NUM * sizeof(struct drv_func_mb)));

        /* 57712 plus */
        if (sc->devinfo.shmem2_base != 0) {
                shmem2_size = SHMEM2_RD(sc, size);
                if (shmem2_size > offsetof(struct shmem2_region, mf_cfg_addr)) {
                        mf_cfg_offset_value = SHMEM2_RD(sc, mf_cfg_addr);
                        if (SHMEM_MF_CFG_ADDR_NONE != mf_cfg_offset_value) {
                                offset = mf_cfg_offset_value;
                        }
                }
        }

        return offset;
}

static uint32_t bnx2x_pcie_capability_read(struct bnx2x_softc *sc, int reg)
{
        uint32_t ret;
        struct bnx2x_pci_cap *caps;

        /* ensure PCIe capability is enabled */
        caps = pci_find_cap(sc, PCIY_EXPRESS, BNX2X_PCI_CAP);
        if (NULL != caps) {
                PMD_DRV_LOG(DEBUG, "Found PCIe capability: "
                            "id=0x%04X type=0x%04X addr=0x%08X",
                            caps->id, caps->type, caps->addr);
                pci_read(sc, (caps->addr + reg), &ret, 2);
                return ret;
        }

        PMD_DRV_LOG(WARNING, "PCIe capability NOT FOUND!!!");

        return 0;
}

static uint8_t bnx2x_is_pcie_pending(struct bnx2x_softc *sc)
{
        return bnx2x_pcie_capability_read(sc, PCIR_EXPRESS_DEVICE_STA) &
                PCIM_EXP_STA_TRANSACTION_PND;
}

/*
* Walk the PCI capabiites list for the device to find what features are
* supported. These capabilites may be enabled/disabled by firmware so it's
* best to walk the list rather than make assumptions.
*/
static void bnx2x_probe_pci_caps(struct bnx2x_softc *sc)
{
        PMD_INIT_FUNC_TRACE();

        struct bnx2x_pci_cap *caps;
        uint16_t link_status;
        int reg = 0;

        /* check if PCI Power Management is enabled */
        caps = pci_find_cap(sc, PCIY_PMG, BNX2X_PCI_CAP);
        if (NULL != caps) {
                PMD_DRV_LOG(DEBUG, "Found PM capability: "
                            "id=0x%04X type=0x%04X addr=0x%08X",
                            caps->id, caps->type, caps->addr);

                sc->devinfo.pcie_cap_flags |= BNX2X_PM_CAPABLE_FLAG;
                sc->devinfo.pcie_pm_cap_reg = caps->addr;
        }

        link_status = bnx2x_pcie_capability_read(sc, PCIR_EXPRESS_LINK_STA);

        sc->devinfo.pcie_link_speed = (link_status & PCIM_LINK_STA_SPEED);
        sc->devinfo.pcie_link_width =
            ((link_status & PCIM_LINK_STA_WIDTH) >> 4);

        PMD_DRV_LOG(DEBUG, "PCIe link speed=%d width=%d",
                    sc->devinfo.pcie_link_speed, sc->devinfo.pcie_link_width);

        sc->devinfo.pcie_cap_flags |= BNX2X_PCIE_CAPABLE_FLAG;

        /* check if MSI capability is enabled */
        caps = pci_find_cap(sc, PCIY_MSI, BNX2X_PCI_CAP);
        if (NULL != caps) {
                PMD_DRV_LOG(DEBUG, "Found MSI capability at 0x%04x", reg);

                sc->devinfo.pcie_cap_flags |= BNX2X_MSI_CAPABLE_FLAG;
                sc->devinfo.pcie_msi_cap_reg = caps->addr;
        }

        /* check if MSI-X capability is enabled */
        caps = pci_find_cap(sc, PCIY_MSIX, BNX2X_PCI_CAP);
        if (NULL != caps) {
                PMD_DRV_LOG(DEBUG, "Found MSI-X capability at 0x%04x", reg);

                sc->devinfo.pcie_cap_flags |= BNX2X_MSIX_CAPABLE_FLAG;
                sc->devinfo.pcie_msix_cap_reg = caps->addr;
        }
}

static int bnx2x_get_shmem_mf_cfg_info_sd(struct bnx2x_softc *sc)
{
        struct bnx2x_mf_info *mf_info = &sc->devinfo.mf_info;
        uint32_t val;

        /* get the outer vlan if we're in switch-dependent mode */

        val = MFCFG_RD(sc, func_mf_config[SC_ABS_FUNC(sc)].e1hov_tag);
        mf_info->ext_id = (uint16_t) val;

        mf_info->multi_vnics_mode = 1;

        if (!VALID_OVLAN(mf_info->ext_id)) {
                PMD_DRV_LOG(NOTICE, "Invalid VLAN (%d)", mf_info->ext_id);
                return 1;
        }

        /* get the capabilities */
        if ((mf_info->mf_config[SC_VN(sc)] & FUNC_MF_CFG_PROTOCOL_MASK) ==
            FUNC_MF_CFG_PROTOCOL_ISCSI) {
                mf_info->mf_protos_supported |= MF_PROTO_SUPPORT_ISCSI;
        } else if ((mf_info->mf_config[SC_VN(sc)] & FUNC_MF_CFG_PROTOCOL_MASK)
                   == FUNC_MF_CFG_PROTOCOL_FCOE) {
                mf_info->mf_protos_supported |= MF_PROTO_SUPPORT_FCOE;
        } else {
                mf_info->mf_protos_supported |= MF_PROTO_SUPPORT_ETHERNET;
        }

        mf_info->vnics_per_port =
            (CHIP_PORT_MODE(sc) == CHIP_4_PORT_MODE) ? 2 : 4;

        return 0;
}

static uint32_t bnx2x_get_shmem_ext_proto_support_flags(struct bnx2x_softc *sc)
{
        uint32_t retval = 0;
        uint32_t val;

        val = MFCFG_RD(sc, func_ext_config[SC_ABS_FUNC(sc)].func_cfg);

        if (val & MACP_FUNC_CFG_FLAGS_ENABLED) {
                if (val & MACP_FUNC_CFG_FLAGS_ETHERNET) {
                        retval |= MF_PROTO_SUPPORT_ETHERNET;
                }
                if (val & MACP_FUNC_CFG_FLAGS_ISCSI_OFFLOAD) {
                        retval |= MF_PROTO_SUPPORT_ISCSI;
                }
                if (val & MACP_FUNC_CFG_FLAGS_FCOE_OFFLOAD) {
                        retval |= MF_PROTO_SUPPORT_FCOE;
                }
        }

        return retval;
}

static int bnx2x_get_shmem_mf_cfg_info_si(struct bnx2x_softc *sc)
{
        struct bnx2x_mf_info *mf_info = &sc->devinfo.mf_info;
        uint32_t val;

        /*
         * There is no outer vlan if we're in switch-independent mode.
         * If the mac is valid then assume multi-function.
         */

        val = MFCFG_RD(sc, func_ext_config[SC_ABS_FUNC(sc)].func_cfg);

        mf_info->multi_vnics_mode = ((val & MACP_FUNC_CFG_FLAGS_MASK) != 0);

        mf_info->mf_protos_supported =
            bnx2x_get_shmem_ext_proto_support_flags(sc);

        mf_info->vnics_per_port =
            (CHIP_PORT_MODE(sc) == CHIP_4_PORT_MODE) ? 2 : 4;

        return 0;
}

static int bnx2x_get_shmem_mf_cfg_info_niv(struct bnx2x_softc *sc)
{
        struct bnx2x_mf_info *mf_info = &sc->devinfo.mf_info;
        uint32_t e1hov_tag;
        uint32_t func_config;
        uint32_t niv_config;

        mf_info->multi_vnics_mode = 1;

        e1hov_tag = MFCFG_RD(sc, func_mf_config[SC_ABS_FUNC(sc)].e1hov_tag);
        func_config = MFCFG_RD(sc, func_mf_config[SC_ABS_FUNC(sc)].config);
        niv_config = MFCFG_RD(sc, func_mf_config[SC_ABS_FUNC(sc)].afex_config);

        mf_info->ext_id =
            (uint16_t) ((e1hov_tag & FUNC_MF_CFG_E1HOV_TAG_MASK) >>
                        FUNC_MF_CFG_E1HOV_TAG_SHIFT);

        mf_info->default_vlan =
            (uint16_t) ((e1hov_tag & FUNC_MF_CFG_AFEX_VLAN_MASK) >>
                        FUNC_MF_CFG_AFEX_VLAN_SHIFT);

        mf_info->niv_allowed_priorities =
            (uint8_t) ((niv_config & FUNC_MF_CFG_AFEX_COS_FILTER_MASK) >>
                       FUNC_MF_CFG_AFEX_COS_FILTER_SHIFT);

        mf_info->niv_default_cos =
            (uint8_t) ((func_config & FUNC_MF_CFG_TRANSMIT_PRIORITY_MASK) >>
                       FUNC_MF_CFG_TRANSMIT_PRIORITY_SHIFT);

        mf_info->afex_vlan_mode =
            ((niv_config & FUNC_MF_CFG_AFEX_VLAN_MODE_MASK) >>
             FUNC_MF_CFG_AFEX_VLAN_MODE_SHIFT);

        mf_info->niv_mba_enabled =
            ((niv_config & FUNC_MF_CFG_AFEX_MBA_ENABLED_MASK) >>
             FUNC_MF_CFG_AFEX_MBA_ENABLED_SHIFT);

        mf_info->mf_protos_supported =
            bnx2x_get_shmem_ext_proto_support_flags(sc);

        mf_info->vnics_per_port =
            (CHIP_PORT_MODE(sc) == CHIP_4_PORT_MODE) ? 2 : 4;

        return 0;
}

static int bnx2x_check_valid_mf_cfg(struct bnx2x_softc *sc)
{
        struct bnx2x_mf_info *mf_info = &sc->devinfo.mf_info;
        uint32_t mf_cfg1;
        uint32_t mf_cfg2;
        uint32_t ovlan1;
        uint32_t ovlan2;
        uint8_t i, j;

        /* various MF mode sanity checks... */

        if (mf_info->mf_config[SC_VN(sc)] & FUNC_MF_CFG_FUNC_HIDE) {
                PMD_DRV_LOG(NOTICE,
                            "Enumerated function %d is marked as hidden",
                            SC_PORT(sc));
                return 1;
        }

        if ((mf_info->vnics_per_port > 1) && !mf_info->multi_vnics_mode) {
                PMD_DRV_LOG(NOTICE, "vnics_per_port=%d multi_vnics_mode=%d",
                            mf_info->vnics_per_port, mf_info->multi_vnics_mode);
                return 1;
        }

        if (mf_info->mf_mode == MULTI_FUNCTION_SD) {
/* vnic id > 0 must have valid ovlan in switch-dependent mode */
                if ((SC_VN(sc) > 0) && !VALID_OVLAN(OVLAN(sc))) {
                        PMD_DRV_LOG(NOTICE, "mf_mode=SD vnic_id=%d ovlan=%d",
                                    SC_VN(sc), OVLAN(sc));
                        return 1;
                }

                if (!VALID_OVLAN(OVLAN(sc)) && mf_info->multi_vnics_mode) {
                        PMD_DRV_LOG(NOTICE,
                                    "mf_mode=SD multi_vnics_mode=%d ovlan=%d",
                                    mf_info->multi_vnics_mode, OVLAN(sc));
                        return 1;
                }

/*
 * Verify all functions are either MF or SF mode. If MF, make sure
 * sure that all non-hidden functions have a valid ovlan. If SF,
 * make sure that all non-hidden functions have an invalid ovlan.
 */
                FOREACH_ABS_FUNC_IN_PORT(sc, i) {
                        mf_cfg1 = MFCFG_RD(sc, func_mf_config[i].config);
                        ovlan1 = MFCFG_RD(sc, func_mf_config[i].e1hov_tag);
                        if (!(mf_cfg1 & FUNC_MF_CFG_FUNC_HIDE) &&
                            (((mf_info->multi_vnics_mode)
                              && !VALID_OVLAN(ovlan1))
                             || ((!mf_info->multi_vnics_mode)
                                 && VALID_OVLAN(ovlan1)))) {
                                PMD_DRV_LOG(NOTICE,
                                            "mf_mode=SD function %d MF config "
                                            "mismatch, multi_vnics_mode=%d ovlan=%d",
                                            i, mf_info->multi_vnics_mode,
                                            ovlan1);
                                return 1;
                        }
                }

/* Verify all funcs on the same port each have a different ovlan. */
                FOREACH_ABS_FUNC_IN_PORT(sc, i) {
                        mf_cfg1 = MFCFG_RD(sc, func_mf_config[i].config);
                        ovlan1 = MFCFG_RD(sc, func_mf_config[i].e1hov_tag);
                        /* iterate from the next function on the port to the max func */
                        for (j = i + 2; j < MAX_FUNC_NUM; j += 2) {
                                mf_cfg2 =
                                    MFCFG_RD(sc, func_mf_config[j].config);
                                ovlan2 =
                                    MFCFG_RD(sc, func_mf_config[j].e1hov_tag);
                                if (!(mf_cfg1 & FUNC_MF_CFG_FUNC_HIDE)
                                    && VALID_OVLAN(ovlan1)
                                    && !(mf_cfg2 & FUNC_MF_CFG_FUNC_HIDE)
                                    && VALID_OVLAN(ovlan2)
                                    && (ovlan1 == ovlan2)) {
                                        PMD_DRV_LOG(NOTICE,
                                                    "mf_mode=SD functions %d and %d "
                                                    "have the same ovlan (%d)",
                                                    i, j, ovlan1);
                                        return 1;
                                }
                        }
                }
        }
        /* MULTI_FUNCTION_SD */
        return 0;
}

static int bnx2x_get_mf_cfg_info(struct bnx2x_softc *sc)
{
        struct bnx2x_mf_info *mf_info = &sc->devinfo.mf_info;
        uint32_t val, mac_upper;
        uint8_t i, vnic;

        /* initialize mf_info defaults */
        mf_info->vnics_per_port = 1;
        mf_info->multi_vnics_mode = FALSE;
        mf_info->path_has_ovlan = FALSE;
        mf_info->mf_mode = SINGLE_FUNCTION;

        if (!CHIP_IS_MF_CAP(sc)) {
                return 0;
        }

        if (sc->devinfo.mf_cfg_base == SHMEM_MF_CFG_ADDR_NONE) {
                PMD_DRV_LOG(NOTICE, "Invalid mf_cfg_base!");
                return 1;
        }

        /* get the MF mode (switch dependent / independent / single-function) */

        val = SHMEM_RD(sc, dev_info.shared_feature_config.config);

        switch (val & SHARED_FEAT_CFG_FORCE_SF_MODE_MASK) {
        case SHARED_FEAT_CFG_FORCE_SF_MODE_SWITCH_INDEPT:

                mac_upper =
                    MFCFG_RD(sc, func_mf_config[SC_ABS_FUNC(sc)].mac_upper);

                /* check for legal upper mac bytes */
                if (mac_upper != FUNC_MF_CFG_UPPERMAC_DEFAULT) {
                        mf_info->mf_mode = MULTI_FUNCTION_SI;
                } else {
                        PMD_DRV_LOG(NOTICE,
                                    "Invalid config for Switch Independent mode");
                }

                break;

        case SHARED_FEAT_CFG_FORCE_SF_MODE_MF_ALLOWED:
        case SHARED_FEAT_CFG_FORCE_SF_MODE_SPIO4:

                /* get outer vlan configuration */
                val = MFCFG_RD(sc, func_mf_config[SC_ABS_FUNC(sc)].e1hov_tag);

                if ((val & FUNC_MF_CFG_E1HOV_TAG_MASK) !=
                    FUNC_MF_CFG_E1HOV_TAG_DEFAULT) {
                        mf_info->mf_mode = MULTI_FUNCTION_SD;
                } else {
                        PMD_DRV_LOG(NOTICE,
                                    "Invalid config for Switch Dependent mode");
                }

                break;

        case SHARED_FEAT_CFG_FORCE_SF_MODE_FORCED_SF:

                /* not in MF mode, vnics_per_port=1 and multi_vnics_mode=FALSE */
                return 0;

        case SHARED_FEAT_CFG_FORCE_SF_MODE_AFEX_MODE:

                /*
                 * Mark MF mode as NIV if MCP version includes NPAR-SD support
                 * and the MAC address is valid.
                 */
                mac_upper =
                    MFCFG_RD(sc, func_mf_config[SC_ABS_FUNC(sc)].mac_upper);

                if ((SHMEM2_HAS(sc, afex_driver_support)) &&
                    (mac_upper != FUNC_MF_CFG_UPPERMAC_DEFAULT)) {
                        mf_info->mf_mode = MULTI_FUNCTION_AFEX;
                } else {
                        PMD_DRV_LOG(NOTICE, "Invalid config for AFEX mode");
                }

                break;

        default:

                PMD_DRV_LOG(NOTICE, "Unknown MF mode (0x%08x)",
                            (val & SHARED_FEAT_CFG_FORCE_SF_MODE_MASK));

                return 1;
        }

        /* set path mf_mode (which could be different than function mf_mode) */
        if (mf_info->mf_mode == MULTI_FUNCTION_SD) {
                mf_info->path_has_ovlan = TRUE;
        } else if (mf_info->mf_mode == SINGLE_FUNCTION) {
/*
 * Decide on path multi vnics mode. If we're not in MF mode and in
 * 4-port mode, this is good enough to check vnic-0 of the other port
 * on the same path
 */
                if (CHIP_PORT_MODE(sc) == CHIP_4_PORT_MODE) {
                        uint8_t other_port = !(PORT_ID(sc) & 1);
                        uint8_t abs_func_other_port =
                            (SC_PATH(sc) + (2 * other_port));

                        val =
                            MFCFG_RD(sc,
                                     func_mf_config
                                     [abs_func_other_port].e1hov_tag);

                        mf_info->path_has_ovlan = VALID_OVLAN((uint16_t) val);
                }
        }

        if (mf_info->mf_mode == SINGLE_FUNCTION) {
/* invalid MF config */
                if (SC_VN(sc) >= 1) {
                        PMD_DRV_LOG(NOTICE, "VNIC ID >= 1 in SF mode");
                        return 1;
                }

                return 0;
        }

        /* get the MF configuration */
        mf_info->mf_config[SC_VN(sc)] =
            MFCFG_RD(sc, func_mf_config[SC_ABS_FUNC(sc)].config);

        switch (mf_info->mf_mode) {
        case MULTI_FUNCTION_SD:

                bnx2x_get_shmem_mf_cfg_info_sd(sc);
                break;

        case MULTI_FUNCTION_SI:

                bnx2x_get_shmem_mf_cfg_info_si(sc);
                break;

        case MULTI_FUNCTION_AFEX:

                bnx2x_get_shmem_mf_cfg_info_niv(sc);
                break;

        default:

                PMD_DRV_LOG(NOTICE, "Get MF config failed (mf_mode=0x%08x)",
                            mf_info->mf_mode);
                return 1;
        }

        /* get the congestion management parameters */

        vnic = 0;
        FOREACH_ABS_FUNC_IN_PORT(sc, i) {
/* get min/max bw */
                val = MFCFG_RD(sc, func_mf_config[i].config);
                mf_info->min_bw[vnic] =
                    ((val & FUNC_MF_CFG_MIN_BW_MASK) >>
                     FUNC_MF_CFG_MIN_BW_SHIFT);
                mf_info->max_bw[vnic] =
                    ((val & FUNC_MF_CFG_MAX_BW_MASK) >>
                     FUNC_MF_CFG_MAX_BW_SHIFT);
                vnic++;
        }

        return bnx2x_check_valid_mf_cfg(sc);
}

static int bnx2x_get_shmem_info(struct bnx2x_softc *sc)
{
        int port;
        uint32_t mac_hi, mac_lo, val;

        PMD_INIT_FUNC_TRACE();

        port = SC_PORT(sc);
        mac_hi = mac_lo = 0;

        sc->link_params.sc = sc;
        sc->link_params.port = port;

        /* get the hardware config info */
        sc->devinfo.hw_config = SHMEM_RD(sc, dev_info.shared_hw_config.config);
        sc->devinfo.hw_config2 =
            SHMEM_RD(sc, dev_info.shared_hw_config.config2);

        sc->link_params.hw_led_mode =
            ((sc->devinfo.hw_config & SHARED_HW_CFG_LED_MODE_MASK) >>
             SHARED_HW_CFG_LED_MODE_SHIFT);

        /* get the port feature config */
        sc->port.config =
            SHMEM_RD(sc, dev_info.port_feature_config[port].config);

        /* get the link params */
        sc->link_params.speed_cap_mask[ELINK_INT_PHY] =
            SHMEM_RD(sc, dev_info.port_hw_config[port].speed_capability_mask)
            & PORT_HW_CFG_SPEED_CAPABILITY_D0_MASK;
        sc->link_params.speed_cap_mask[ELINK_EXT_PHY1] =
            SHMEM_RD(sc, dev_info.port_hw_config[port].speed_capability_mask2)
            & PORT_HW_CFG_SPEED_CAPABILITY_D0_MASK;

        /* get the lane config */
        sc->link_params.lane_config =
            SHMEM_RD(sc, dev_info.port_hw_config[port].lane_config);

        /* get the link config */
        val = SHMEM_RD(sc, dev_info.port_feature_config[port].link_config);
        sc->port.link_config[ELINK_INT_PHY] = val;
        sc->link_params.switch_cfg = (val & PORT_FEATURE_CONNECTED_SWITCH_MASK);
        sc->port.link_config[ELINK_EXT_PHY1] =
            SHMEM_RD(sc, dev_info.port_feature_config[port].link_config2);

        /* get the override preemphasis flag and enable it or turn it off */
        val = SHMEM_RD(sc, dev_info.shared_feature_config.config);
        if (val & SHARED_FEAT_CFG_OVERRIDE_PREEMPHASIS_CFG_ENABLED) {
                sc->link_params.feature_config_flags |=
                    ELINK_FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED;
        } else {
                sc->link_params.feature_config_flags &=
                    ~ELINK_FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED;
        }

        /* get the initial value of the link params */
        sc->link_params.multi_phy_config =
            SHMEM_RD(sc, dev_info.port_hw_config[port].multi_phy_config);

        /* get external phy info */
        sc->port.ext_phy_config =
            SHMEM_RD(sc, dev_info.port_hw_config[port].external_phy_config);

        /* get the multifunction configuration */
        bnx2x_get_mf_cfg_info(sc);

        /* get the mac address */
        if (IS_MF(sc)) {
                mac_hi =
                    MFCFG_RD(sc, func_mf_config[SC_ABS_FUNC(sc)].mac_upper);
                mac_lo =
                    MFCFG_RD(sc, func_mf_config[SC_ABS_FUNC(sc)].mac_lower);
        } else {
                mac_hi = SHMEM_RD(sc, dev_info.port_hw_config[port].mac_upper);
                mac_lo = SHMEM_RD(sc, dev_info.port_hw_config[port].mac_lower);
        }

        if ((mac_lo == 0) && (mac_hi == 0)) {
                *sc->mac_addr_str = 0;
                PMD_DRV_LOG(NOTICE, "No Ethernet address programmed!");
        } else {
                sc->link_params.mac_addr[0] = (uint8_t) (mac_hi >> 8);
                sc->link_params.mac_addr[1] = (uint8_t) (mac_hi);
                sc->link_params.mac_addr[2] = (uint8_t) (mac_lo >> 24);
                sc->link_params.mac_addr[3] = (uint8_t) (mac_lo >> 16);
                sc->link_params.mac_addr[4] = (uint8_t) (mac_lo >> 8);
                sc->link_params.mac_addr[5] = (uint8_t) (mac_lo);
                snprintf(sc->mac_addr_str, sizeof(sc->mac_addr_str),
                         "%02x:%02x:%02x:%02x:%02x:%02x",
                         sc->link_params.mac_addr[0],
                         sc->link_params.mac_addr[1],
                         sc->link_params.mac_addr[2],
                         sc->link_params.mac_addr[3],
                         sc->link_params.mac_addr[4],
                         sc->link_params.mac_addr[5]);
                PMD_DRV_LOG(DEBUG, "Ethernet address: %s", sc->mac_addr_str);
        }

        return 0;
}

static void bnx2x_media_detect(struct bnx2x_softc *sc)
{
        uint32_t phy_idx = bnx2x_get_cur_phy_idx(sc);
        switch (sc->link_params.phy[phy_idx].media_type) {
        case ELINK_ETH_PHY_SFPP_10G_FIBER:
        case ELINK_ETH_PHY_SFP_1G_FIBER:
        case ELINK_ETH_PHY_XFP_FIBER:
        case ELINK_ETH_PHY_KR:
        case ELINK_ETH_PHY_CX4:
                PMD_DRV_LOG(INFO, "Found 10GBase-CX4 media.");
                sc->media = IFM_10G_CX4;
                break;
        case ELINK_ETH_PHY_DA_TWINAX:
                PMD_DRV_LOG(INFO, "Found 10Gb Twinax media.");
                sc->media = IFM_10G_TWINAX;
                break;
        case ELINK_ETH_PHY_BASE_T:
                PMD_DRV_LOG(INFO, "Found 10GBase-T media.");
                sc->media = IFM_10G_T;
                break;
        case ELINK_ETH_PHY_NOT_PRESENT:
                PMD_DRV_LOG(INFO, "Media not present.");
                sc->media = 0;
                break;
        case ELINK_ETH_PHY_UNSPECIFIED:
        default:
                PMD_DRV_LOG(INFO, "Unknown media!");
                sc->media = 0;
                break;
        }
}

#define GET_FIELD(value, fname)                     \
(((value) & (fname##_MASK)) >> (fname##_SHIFT))
#define IGU_FID(val) GET_FIELD((val), IGU_REG_MAPPING_MEMORY_FID)
#define IGU_VEC(val) GET_FIELD((val), IGU_REG_MAPPING_MEMORY_VECTOR)

static int bnx2x_get_igu_cam_info(struct bnx2x_softc *sc)
{
        int pfid = SC_FUNC(sc);
        int igu_sb_id;
        uint32_t val;
        uint8_t fid, igu_sb_cnt = 0;

        sc->igu_base_sb = 0xff;

        if (CHIP_INT_MODE_IS_BC(sc)) {
                int vn = SC_VN(sc);
                igu_sb_cnt = sc->igu_sb_cnt;
                sc->igu_base_sb = ((CHIP_IS_MODE_4_PORT(sc) ? pfid : vn) *
                                   FP_SB_MAX_E1x);
                sc->igu_dsb_id = (E1HVN_MAX * FP_SB_MAX_E1x +
                                  (CHIP_IS_MODE_4_PORT(sc) ? pfid : vn));
                return 0;
        }

        /* IGU in normal mode - read CAM */
        for (igu_sb_id = 0;
             igu_sb_id < IGU_REG_MAPPING_MEMORY_SIZE; igu_sb_id++) {
                val = REG_RD(sc, IGU_REG_MAPPING_MEMORY + igu_sb_id * 4);
                if (!(val & IGU_REG_MAPPING_MEMORY_VALID)) {
                        continue;
                }
                fid = IGU_FID(val);
                if (fid & IGU_FID_ENCODE_IS_PF) {
                        if ((fid & IGU_FID_PF_NUM_MASK) != pfid) {
                                continue;
                        }
                        if (IGU_VEC(val) == 0) {
                                /* default status block */
                                sc->igu_dsb_id = igu_sb_id;
                        } else {
                                if (sc->igu_base_sb == 0xff) {
                                        sc->igu_base_sb = igu_sb_id;
                                }
                                igu_sb_cnt++;
                        }
                }
        }

        /*
         * Due to new PF resource allocation by MFW T7.4 and above, it's optional
         * that number of CAM entries will not be equal to the value advertised in
         * PCI. Driver should use the minimal value of both as the actual status
         * block count
         */
        sc->igu_sb_cnt = min(sc->igu_sb_cnt, igu_sb_cnt);

        if (igu_sb_cnt == 0) {
                PMD_DRV_LOG(ERR, "CAM configuration error");
                return -1;
        }

        return 0;
}

/*
* Gather various information from the device config space, the device itself,
* shmem, and the user input.
*/
static int bnx2x_get_device_info(struct bnx2x_softc *sc)
{
        uint32_t val;
        int rc;

        /* get the chip revision (chip metal comes from pci config space) */
        sc->devinfo.chip_id = sc->link_params.chip_id =
            (((REG_RD(sc, MISC_REG_CHIP_NUM) & 0xffff) << 16) |
             ((REG_RD(sc, MISC_REG_CHIP_REV) & 0xf) << 12) |
             (((REG_RD(sc, PCICFG_OFFSET + PCI_ID_VAL3) >> 24) & 0xf) << 4) |
             ((REG_RD(sc, MISC_REG_BOND_ID) & 0xf) << 0));

        /* force 57811 according to MISC register */
        if (REG_RD(sc, MISC_REG_CHIP_TYPE) & MISC_REG_CHIP_TYPE_57811_MASK) {
                if (CHIP_IS_57810(sc)) {
                        sc->devinfo.chip_id = ((CHIP_NUM_57811 << 16) |
                                               (sc->
                                                devinfo.chip_id & 0x0000ffff));
                } else if (CHIP_IS_57810_MF(sc)) {
                        sc->devinfo.chip_id = ((CHIP_NUM_57811_MF << 16) |
                                               (sc->
                                                devinfo.chip_id & 0x0000ffff));
                }
                sc->devinfo.chip_id |= 0x1;
        }

        PMD_DRV_LOG(DEBUG,
                    "chip_id=0x%08x (num=0x%04x rev=0x%01x metal=0x%02x bond=0x%01x)",
                    sc->devinfo.chip_id,
                    ((sc->devinfo.chip_id >> 16) & 0xffff),
                    ((sc->devinfo.chip_id >> 12) & 0xf),
                    ((sc->devinfo.chip_id >> 4) & 0xff),
                    ((sc->devinfo.chip_id >> 0) & 0xf));

        val = (REG_RD(sc, 0x2874) & 0x55);
        if ((sc->devinfo.chip_id & 0x1) || (CHIP_IS_E1H(sc) && (val == 0x55))) {
                sc->flags |= BNX2X_ONE_PORT_FLAG;
                PMD_DRV_LOG(DEBUG, "single port device");
        }

        /* set the doorbell size */
        sc->doorbell_size = (1 << BNX2X_DB_SHIFT);

        /* determine whether the device is in 2 port or 4 port mode */
        sc->devinfo.chip_port_mode = CHIP_PORT_MODE_NONE;       /* E1h */
        if (CHIP_IS_E2E3(sc)) {
/*
 * Read port4mode_en_ovwr[0]:
 *   If 1, four port mode is in port4mode_en_ovwr[1].
 *   If 0, four port mode is in port4mode_en[0].
 */
                val = REG_RD(sc, MISC_REG_PORT4MODE_EN_OVWR);
                if (val & 1) {
                        val = ((val >> 1) & 1);
                } else {
                        val = REG_RD(sc, MISC_REG_PORT4MODE_EN);
                }

                sc->devinfo.chip_port_mode =
                    (val) ? CHIP_4_PORT_MODE : CHIP_2_PORT_MODE;

                PMD_DRV_LOG(DEBUG, "Port mode = %s", (val) ? "4" : "2");
        }

        /* get the function and path info for the device */
        bnx2x_get_function_num(sc);

        /* get the shared memory base address */
        sc->devinfo.shmem_base =
            sc->link_params.shmem_base = REG_RD(sc, MISC_REG_SHARED_MEM_ADDR);
        sc->devinfo.shmem2_base =
            REG_RD(sc, (SC_PATH(sc) ? MISC_REG_GENERIC_CR_1 :
                        MISC_REG_GENERIC_CR_0));

        if (!sc->devinfo.shmem_base) {
/* this should ONLY prevent upcoming shmem reads */
                PMD_DRV_LOG(INFO, "MCP not active");
                sc->flags |= BNX2X_NO_MCP_FLAG;
                return 0;
        }

        /* make sure the shared memory contents are valid */
        val = SHMEM_RD(sc, validity_map[SC_PORT(sc)]);
        if ((val & (SHR_MEM_VALIDITY_DEV_INFO | SHR_MEM_VALIDITY_MB)) !=
            (SHR_MEM_VALIDITY_DEV_INFO | SHR_MEM_VALIDITY_MB)) {
                PMD_DRV_LOG(NOTICE, "Invalid SHMEM validity signature: 0x%08x",
                            val);
                return 0;
        }

        /* get the bootcode version */
        sc->devinfo.bc_ver = SHMEM_RD(sc, dev_info.bc_rev);
        snprintf(sc->devinfo.bc_ver_str,
                 sizeof(sc->devinfo.bc_ver_str),
                 "%d.%d.%d",
                 ((sc->devinfo.bc_ver >> 24) & 0xff),
                 ((sc->devinfo.bc_ver >> 16) & 0xff),
                 ((sc->devinfo.bc_ver >> 8) & 0xff));
        PMD_DRV_LOG(INFO, "Bootcode version: %s", sc->devinfo.bc_ver_str);

        /* get the bootcode shmem address */
        sc->devinfo.mf_cfg_base = bnx2x_get_shmem_mf_cfg_base(sc);

        /* clean indirect addresses as they're not used */
        pci_write_long(sc, PCICFG_GRC_ADDRESS, 0);
        if (IS_PF(sc)) {
                REG_WR(sc, PXP2_REG_PGL_ADDR_88_F0, 0);
                REG_WR(sc, PXP2_REG_PGL_ADDR_8C_F0, 0);
                REG_WR(sc, PXP2_REG_PGL_ADDR_90_F0, 0);
                REG_WR(sc, PXP2_REG_PGL_ADDR_94_F0, 0);
                if (CHIP_IS_E1x(sc)) {
                        REG_WR(sc, PXP2_REG_PGL_ADDR_88_F1, 0);
                        REG_WR(sc, PXP2_REG_PGL_ADDR_8C_F1, 0);
                        REG_WR(sc, PXP2_REG_PGL_ADDR_90_F1, 0);
                        REG_WR(sc, PXP2_REG_PGL_ADDR_94_F1, 0);
                }
        }

        /* get the nvram size */
        val = REG_RD(sc, MCP_REG_MCPR_NVM_CFG4);
        sc->devinfo.flash_size =
            (NVRAM_1MB_SIZE << (val & MCPR_NVM_CFG4_FLASH_SIZE));

        bnx2x_set_power_state(sc, PCI_PM_D0);
        /* get various configuration parameters from shmem */
        bnx2x_get_shmem_info(sc);

        /* initialize IGU parameters */
        if (CHIP_IS_E1x(sc)) {
                sc->devinfo.int_block = INT_BLOCK_HC;
                sc->igu_dsb_id = DEF_SB_IGU_ID;
                sc->igu_base_sb = 0;
        } else {
                sc->devinfo.int_block = INT_BLOCK_IGU;

/* do not allow device reset during IGU info preocessing */
                bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_RESET);

                val = REG_RD(sc, IGU_REG_BLOCK_CONFIGURATION);

                if (val & IGU_BLOCK_CONFIGURATION_REG_BACKWARD_COMP_EN) {
                        int tout = 5000;

                        val &= ~(IGU_BLOCK_CONFIGURATION_REG_BACKWARD_COMP_EN);
                        REG_WR(sc, IGU_REG_BLOCK_CONFIGURATION, val);
                        REG_WR(sc, IGU_REG_RESET_MEMORIES, 0x7f);

                        while (tout && REG_RD(sc, IGU_REG_RESET_MEMORIES)) {
                                tout--;
                                DELAY(1000);
                        }

                        if (REG_RD(sc, IGU_REG_RESET_MEMORIES)) {
                                PMD_DRV_LOG(NOTICE,
                                            "FORCING IGU Normal Mode failed!!!");
                                bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_RESET);
                                return -1;
                        }
                }

                if (val & IGU_BLOCK_CONFIGURATION_REG_BACKWARD_COMP_EN) {
                        PMD_DRV_LOG(DEBUG, "IGU Backward Compatible Mode");
                        sc->devinfo.int_block |= INT_BLOCK_MODE_BW_COMP;
                } else {
                        PMD_DRV_LOG(DEBUG, "IGU Normal Mode");
                }

                rc = bnx2x_get_igu_cam_info(sc);

                bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_RESET);

                if (rc) {
                        return rc;
                }
        }

        /*
         * Get base FW non-default (fast path) status block ID. This value is
         * used to initialize the fw_sb_id saved on the fp/queue structure to
         * determine the id used by the FW.
         */
        if (CHIP_IS_E1x(sc)) {
                sc->base_fw_ndsb =
                    ((SC_PORT(sc) * FP_SB_MAX_E1x) + SC_L_ID(sc));
        } else {
/*
 * 57712+ - We currently use one FW SB per IGU SB (Rx and Tx of
 * the same queue are indicated on the same IGU SB). So we prefer
 * FW and IGU SBs to be the same value.
 */
                sc->base_fw_ndsb = sc->igu_base_sb;
        }

        elink_phy_probe(&sc->link_params);

        return 0;
}

static void
bnx2x_link_settings_supported(struct bnx2x_softc *sc, uint32_t switch_cfg)
{
        uint32_t cfg_size = 0;
        uint32_t idx;
        uint8_t port = SC_PORT(sc);

        /* aggregation of supported attributes of all external phys */
        sc->port.supported[0] = 0;
        sc->port.supported[1] = 0;

        switch (sc->link_params.num_phys) {
        case 1:
                sc->port.supported[0] =
                    sc->link_params.phy[ELINK_INT_PHY].supported;
                cfg_size = 1;
                break;
        case 2:
                sc->port.supported[0] =
                    sc->link_params.phy[ELINK_EXT_PHY1].supported;
                cfg_size = 1;
                break;
        case 3:
                if (sc->link_params.multi_phy_config &
                    PORT_HW_CFG_PHY_SWAPPED_ENABLED) {
                        sc->port.supported[1] =
                            sc->link_params.phy[ELINK_EXT_PHY1].supported;
                        sc->port.supported[0] =
                            sc->link_params.phy[ELINK_EXT_PHY2].supported;
                } else {
                        sc->port.supported[0] =
                            sc->link_params.phy[ELINK_EXT_PHY1].supported;
                        sc->port.supported[1] =
                            sc->link_params.phy[ELINK_EXT_PHY2].supported;
                }
                cfg_size = 2;
                break;
        }

        if (!(sc->port.supported[0] || sc->port.supported[1])) {
                PMD_DRV_LOG(ERR,
                            "Invalid phy config in NVRAM (PHY1=0x%08x PHY2=0x%08x)",
                            SHMEM_RD(sc,
                                     dev_info.port_hw_config
                                     [port].external_phy_config),
                            SHMEM_RD(sc,
                                     dev_info.port_hw_config
                                     [port].external_phy_config2));
                return;
        }

        if (CHIP_IS_E3(sc))
                sc->port.phy_addr = REG_RD(sc, MISC_REG_WC0_CTRL_PHY_ADDR);
        else {
                switch (switch_cfg) {
                case ELINK_SWITCH_CFG_1G:
                        sc->port.phy_addr =
                            REG_RD(sc,
                                   NIG_REG_SERDES0_CTRL_PHY_ADDR + port * 0x10);
                        break;
                case ELINK_SWITCH_CFG_10G:
                        sc->port.phy_addr =
                            REG_RD(sc,
                                   NIG_REG_XGXS0_CTRL_PHY_ADDR + port * 0x18);
                        break;
                default:
                        PMD_DRV_LOG(ERR,
                                    "Invalid switch config in"
                                    "link_config=0x%08x",
                                    sc->port.link_config[0]);
                        return;
                }
        }

        PMD_DRV_LOG(INFO, "PHY addr 0x%08x", sc->port.phy_addr);

        /* mask what we support according to speed_cap_mask per configuration */
        for (idx = 0; idx < cfg_size; idx++) {
                if (!(sc->link_params.speed_cap_mask[idx] &
                      PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF)) {
                        sc->port.supported[idx] &=
                            ~ELINK_SUPPORTED_10baseT_Half;
                }

                if (!(sc->link_params.speed_cap_mask[idx] &
                      PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL)) {
                        sc->port.supported[idx] &=
                            ~ELINK_SUPPORTED_10baseT_Full;
                }

                if (!(sc->link_params.speed_cap_mask[idx] &
                      PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF)) {
                        sc->port.supported[idx] &=
                            ~ELINK_SUPPORTED_100baseT_Half;
                }

                if (!(sc->link_params.speed_cap_mask[idx] &
                      PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL)) {
                        sc->port.supported[idx] &=
                            ~ELINK_SUPPORTED_100baseT_Full;
                }

                if (!(sc->link_params.speed_cap_mask[idx] &
                      PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)) {
                        sc->port.supported[idx] &=
                            ~ELINK_SUPPORTED_1000baseT_Full;
                }

                if (!(sc->link_params.speed_cap_mask[idx] &
                      PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G)) {
                        sc->port.supported[idx] &=
                            ~ELINK_SUPPORTED_2500baseX_Full;
                }

                if (!(sc->link_params.speed_cap_mask[idx] &
                      PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)) {
                        sc->port.supported[idx] &=
                            ~ELINK_SUPPORTED_10000baseT_Full;
                }

                if (!(sc->link_params.speed_cap_mask[idx] &
                      PORT_HW_CFG_SPEED_CAPABILITY_D0_20G)) {
                        sc->port.supported[idx] &=
                            ~ELINK_SUPPORTED_20000baseKR2_Full;
                }
        }

        PMD_DRV_LOG(INFO, "PHY supported 0=0x%08x 1=0x%08x",
                    sc->port.supported[0], sc->port.supported[1]);
}

static void bnx2x_link_settings_requested(struct bnx2x_softc *sc)
{
        uint32_t link_config;
        uint32_t idx;
        uint32_t cfg_size = 0;

        sc->port.advertising[0] = 0;
        sc->port.advertising[1] = 0;

        switch (sc->link_params.num_phys) {
        case 1:
        case 2:
                cfg_size = 1;
                break;
        case 3:
                cfg_size = 2;
                break;
        }

        for (idx = 0; idx < cfg_size; idx++) {
                sc->link_params.req_duplex[idx] = DUPLEX_FULL;
                link_config = sc->port.link_config[idx];

                switch (link_config & PORT_FEATURE_LINK_SPEED_MASK) {
                case PORT_FEATURE_LINK_SPEED_AUTO:
                        if (sc->port.supported[idx] & ELINK_SUPPORTED_Autoneg) {
                                sc->link_params.req_line_speed[idx] =
                                    ELINK_SPEED_AUTO_NEG;
                                sc->port.advertising[idx] |=
                                    sc->port.supported[idx];
                                if (sc->link_params.phy[ELINK_EXT_PHY1].type ==
                                    PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84833)
                                        sc->port.advertising[idx] |=
                                            (ELINK_SUPPORTED_100baseT_Half |
                                             ELINK_SUPPORTED_100baseT_Full);
                        } else {
                                /* force 10G, no AN */
                                sc->link_params.req_line_speed[idx] =
                                    ELINK_SPEED_10000;
                                sc->port.advertising[idx] |=
                                    (ADVERTISED_10000baseT_Full |
                                     ADVERTISED_FIBRE);
                                continue;
                        }
                        break;

                case PORT_FEATURE_LINK_SPEED_10M_FULL:
                        if (sc->
                            port.supported[idx] & ELINK_SUPPORTED_10baseT_Full)
                        {
                                sc->link_params.req_line_speed[idx] =
                                    ELINK_SPEED_10;
                                sc->port.advertising[idx] |=
                                    (ADVERTISED_10baseT_Full | ADVERTISED_TP);
                        } else {
                                PMD_DRV_LOG(ERR,
                                            "Invalid NVRAM config link_config=0x%08x "
                                            "speed_cap_mask=0x%08x",
                                            link_config,
                                            sc->
                                            link_params.speed_cap_mask[idx]);
                                return;
                        }
                        break;

                case PORT_FEATURE_LINK_SPEED_10M_HALF:
                        if (sc->
                            port.supported[idx] & ELINK_SUPPORTED_10baseT_Half)
                        {
                                sc->link_params.req_line_speed[idx] =
                                    ELINK_SPEED_10;
                                sc->link_params.req_duplex[idx] = DUPLEX_HALF;
                                sc->port.advertising[idx] |=
                                    (ADVERTISED_10baseT_Half | ADVERTISED_TP);
                        } else {
                                PMD_DRV_LOG(ERR,
                                            "Invalid NVRAM config link_config=0x%08x "
                                            "speed_cap_mask=0x%08x",
                                            link_config,
                                            sc->
                                            link_params.speed_cap_mask[idx]);
                                return;
                        }
                        break;

                case PORT_FEATURE_LINK_SPEED_100M_FULL:
                        if (sc->
                            port.supported[idx] & ELINK_SUPPORTED_100baseT_Full)
                        {
                                sc->link_params.req_line_speed[idx] =
                                    ELINK_SPEED_100;
                                sc->port.advertising[idx] |=
                                    (ADVERTISED_100baseT_Full | ADVERTISED_TP);
                        } else {
                                PMD_DRV_LOG(ERR,
                                            "Invalid NVRAM config link_config=0x%08x "
                                            "speed_cap_mask=0x%08x",
                                            link_config,
                                            sc->
                                            link_params.speed_cap_mask[idx]);
                                return;
                        }
                        break;

                case PORT_FEATURE_LINK_SPEED_100M_HALF:
                        if (sc->
                            port.supported[idx] & ELINK_SUPPORTED_100baseT_Half)
                        {
                                sc->link_params.req_line_speed[idx] =
                                    ELINK_SPEED_100;
                                sc->link_params.req_duplex[idx] = DUPLEX_HALF;
                                sc->port.advertising[idx] |=
                                    (ADVERTISED_100baseT_Half | ADVERTISED_TP);
                        } else {
                                PMD_DRV_LOG(ERR,
                                            "Invalid NVRAM config link_config=0x%08x "
                                            "speed_cap_mask=0x%08x",
                                            link_config,
                                            sc->
                                            link_params.speed_cap_mask[idx]);
                                return;
                        }
                        break;

                case PORT_FEATURE_LINK_SPEED_1G:
                        if (sc->port.supported[idx] &
                            ELINK_SUPPORTED_1000baseT_Full) {
                                sc->link_params.req_line_speed[idx] =
                                    ELINK_SPEED_1000;
                                sc->port.advertising[idx] |=
                                    (ADVERTISED_1000baseT_Full | ADVERTISED_TP);
                        } else {
                                PMD_DRV_LOG(ERR,
                                            "Invalid NVRAM config link_config=0x%08x "
                                            "speed_cap_mask=0x%08x",
                                            link_config,
                                            sc->
                                            link_params.speed_cap_mask[idx]);
                                return;
                        }
                        break;

                case PORT_FEATURE_LINK_SPEED_2_5G:
                        if (sc->port.supported[idx] &
                            ELINK_SUPPORTED_2500baseX_Full) {
                                sc->link_params.req_line_speed[idx] =
                                    ELINK_SPEED_2500;
                                sc->port.advertising[idx] |=
                                    (ADVERTISED_2500baseX_Full | ADVERTISED_TP);
                        } else {
                                PMD_DRV_LOG(ERR,
                                            "Invalid NVRAM config link_config=0x%08x "
                                            "speed_cap_mask=0x%08x",
                                            link_config,
                                            sc->
                                            link_params.speed_cap_mask[idx]);
                                return;
                        }
                        break;

                case PORT_FEATURE_LINK_SPEED_10G_CX4:
                        if (sc->port.supported[idx] &
                            ELINK_SUPPORTED_10000baseT_Full) {
                                sc->link_params.req_line_speed[idx] =
                                    ELINK_SPEED_10000;
                                sc->port.advertising[idx] |=
                                    (ADVERTISED_10000baseT_Full |
                                     ADVERTISED_FIBRE);
                        } else {
                                PMD_DRV_LOG(ERR,
                                            "Invalid NVRAM config link_config=0x%08x "
                                            "speed_cap_mask=0x%08x",
                                            link_config,
                                            sc->
                                            link_params.speed_cap_mask[idx]);
                                return;
                        }
                        break;

                case PORT_FEATURE_LINK_SPEED_20G:
                        sc->link_params.req_line_speed[idx] = ELINK_SPEED_20000;
                        break;

                default:
                        PMD_DRV_LOG(ERR,
                                    "Invalid NVRAM config link_config=0x%08x "
                                    "speed_cap_mask=0x%08x", link_config,
                                    sc->link_params.speed_cap_mask[idx]);
                        sc->link_params.req_line_speed[idx] =
                            ELINK_SPEED_AUTO_NEG;
                        sc->port.advertising[idx] = sc->port.supported[idx];
                        break;
                }

                sc->link_params.req_flow_ctrl[idx] =
                    (link_config & PORT_FEATURE_FLOW_CONTROL_MASK);

                if (sc->link_params.req_flow_ctrl[idx] == ELINK_FLOW_CTRL_AUTO) {
                        if (!
                            (sc->
                             port.supported[idx] & ELINK_SUPPORTED_Autoneg)) {
                                sc->link_params.req_flow_ctrl[idx] =
                                    ELINK_FLOW_CTRL_NONE;
                        } else {
                                bnx2x_set_requested_fc(sc);
                        }
                }
        }
}

static void bnx2x_get_phy_info(struct bnx2x_softc *sc)
{
        uint8_t port = SC_PORT(sc);
        uint32_t eee_mode;

        PMD_INIT_FUNC_TRACE();

        /* shmem data already read in bnx2x_get_shmem_info() */

        bnx2x_link_settings_supported(sc, sc->link_params.switch_cfg);
        bnx2x_link_settings_requested(sc);

        /* configure link feature according to nvram value */
        eee_mode =
            (((SHMEM_RD(sc, dev_info.port_feature_config[port].eee_power_mode))
              & PORT_FEAT_CFG_EEE_POWER_MODE_MASK) >>
             PORT_FEAT_CFG_EEE_POWER_MODE_SHIFT);
        if (eee_mode != PORT_FEAT_CFG_EEE_POWER_MODE_DISABLED) {
                sc->link_params.eee_mode = (ELINK_EEE_MODE_ADV_LPI |
                                            ELINK_EEE_MODE_ENABLE_LPI |
                                            ELINK_EEE_MODE_OUTPUT_TIME);
        } else {
                sc->link_params.eee_mode = 0;
        }

        /* get the media type */
        bnx2x_media_detect(sc);
}

static void bnx2x_set_modes_bitmap(struct bnx2x_softc *sc)
{
        uint32_t flags = MODE_ASIC | MODE_PORT2;

        if (CHIP_IS_E2(sc)) {
                flags |= MODE_E2;
        } else if (CHIP_IS_E3(sc)) {
                flags |= MODE_E3;
                if (CHIP_REV(sc) == CHIP_REV_Ax) {
                        flags |= MODE_E3_A0;
                } else {        /*if (CHIP_REV(sc) == CHIP_REV_Bx) */

                        flags |= MODE_E3_B0 | MODE_COS3;
                }
        }

        if (IS_MF(sc)) {
                flags |= MODE_MF;
                switch (sc->devinfo.mf_info.mf_mode) {
                case MULTI_FUNCTION_SD:
                        flags |= MODE_MF_SD;
                        break;
                case MULTI_FUNCTION_SI:
                        flags |= MODE_MF_SI;
                        break;
                case MULTI_FUNCTION_AFEX:
                        flags |= MODE_MF_AFEX;
                        break;
                }
        } else {
                flags |= MODE_SF;
        }

#if defined(__LITTLE_ENDIAN)
        flags |= MODE_LITTLE_ENDIAN;
#else /* __BIG_ENDIAN */
        flags |= MODE_BIG_ENDIAN;
#endif

        INIT_MODE_FLAGS(sc) = flags;
}

int bnx2x_alloc_hsi_mem(struct bnx2x_softc *sc)
{
        struct bnx2x_fastpath *fp;
        char buf[32];
        uint32_t i;

        if (IS_PF(sc)) {
/************************/
/* DEFAULT STATUS BLOCK */
/************************/

                if (bnx2x_dma_alloc(sc, sizeof(struct host_sp_status_block),
                                  &sc->def_sb_dma, "def_sb",
                                  RTE_CACHE_LINE_SIZE) != 0) {
                        return -1;
                }

                sc->def_sb =
                    (struct host_sp_status_block *)sc->def_sb_dma.vaddr;
/***************/
/* EVENT QUEUE */
/***************/

                if (bnx2x_dma_alloc(sc, BNX2X_PAGE_SIZE,
                                  &sc->eq_dma, "ev_queue",
                                  RTE_CACHE_LINE_SIZE) != 0) {
                        sc->def_sb = NULL;
                        return -1;
                }

                sc->eq = (union event_ring_elem *)sc->eq_dma.vaddr;

/*************/
/* SLOW PATH */
/*************/

                if (bnx2x_dma_alloc(sc, sizeof(struct bnx2x_slowpath),
                                  &sc->sp_dma, "sp",
                                  RTE_CACHE_LINE_SIZE) != 0) {
                        sc->eq = NULL;
                        sc->def_sb = NULL;
                        return -1;
                }

                sc->sp = (struct bnx2x_slowpath *)sc->sp_dma.vaddr;

/*******************/
/* SLOW PATH QUEUE */
/*******************/

                if (bnx2x_dma_alloc(sc, BNX2X_PAGE_SIZE,
                                  &sc->spq_dma, "sp_queue",
                                  RTE_CACHE_LINE_SIZE) != 0) {
                        sc->sp = NULL;
                        sc->eq = NULL;
                        sc->def_sb = NULL;
                        return -1;
                }

                sc->spq = (struct eth_spe *)sc->spq_dma.vaddr;

/***************************/
/* FW DECOMPRESSION BUFFER */
/***************************/

                if (bnx2x_dma_alloc(sc, FW_BUF_SIZE, &sc->gz_buf_dma,
                                  "fw_buf", RTE_CACHE_LINE_SIZE) != 0) {
                        sc->spq = NULL;
                        sc->sp = NULL;
                        sc->eq = NULL;
                        sc->def_sb = NULL;
                        return -1;
                }

                sc->gz_buf = (void *)sc->gz_buf_dma.vaddr;
        }

        /*************/
        /* FASTPATHS */
        /*************/

        /* allocate DMA memory for each fastpath structure */
        for (i = 0; i < sc->num_queues; i++) {
                fp = &sc->fp[i];
                fp->sc = sc;
                fp->index = i;

/*******************/
/* FP STATUS BLOCK */
/*******************/

                snprintf(buf, sizeof(buf), "fp_%d_sb", i);
                if (bnx2x_dma_alloc(sc, sizeof(union bnx2x_host_hc_status_block),
                                  &fp->sb_dma, buf, RTE_CACHE_LINE_SIZE) != 0) {
                        PMD_DRV_LOG(NOTICE, "Failed to alloc %s", buf);
                        return -1;
                } else {
                        if (CHIP_IS_E2E3(sc)) {
                                fp->status_block.e2_sb =
                                    (struct host_hc_status_block_e2 *)
                                    fp->sb_dma.vaddr;
                        } else {
                                fp->status_block.e1x_sb =
                                    (struct host_hc_status_block_e1x *)
                                    fp->sb_dma.vaddr;
                        }
                }
        }

        return 0;
}

void bnx2x_free_hsi_mem(struct bnx2x_softc *sc)
{
        struct bnx2x_fastpath *fp;
        int i;

        for (i = 0; i < sc->num_queues; i++) {
                fp = &sc->fp[i];

/*******************/
/* FP STATUS BLOCK */
/*******************/

                memset(&fp->status_block, 0, sizeof(fp->status_block));
        }

        /***************************/
        /* FW DECOMPRESSION BUFFER */
        /***************************/

        sc->gz_buf = NULL;

        /*******************/
        /* SLOW PATH QUEUE */
        /*******************/

        sc->spq = NULL;

        /*************/
        /* SLOW PATH */
        /*************/

        sc->sp = NULL;

        /***************/
        /* EVENT QUEUE */
        /***************/

        sc->eq = NULL;

        /************************/
        /* DEFAULT STATUS BLOCK */
        /************************/

        sc->def_sb = NULL;

}

/*
* Previous driver DMAE transaction may have occurred when pre-boot stage
* ended and boot began. This would invalidate the addresses of the
* transaction, resulting in was-error bit set in the PCI causing all
* hw-to-host PCIe transactions to timeout. If this happened we want to clear
* the interrupt which detected this from the pglueb and the was-done bit
*/
static void bnx2x_prev_interrupted_dmae(struct bnx2x_softc *sc)
{
        uint32_t val;

        if (!CHIP_IS_E1x(sc)) {
                val = REG_RD(sc, PGLUE_B_REG_PGLUE_B_INT_STS);
                if (val & PGLUE_B_PGLUE_B_INT_STS_REG_WAS_ERROR_ATTN) {
                        REG_WR(sc, PGLUE_B_REG_WAS_ERROR_PF_7_0_CLR,
                               1 << SC_FUNC(sc));
                }
        }
}

static int bnx2x_prev_mcp_done(struct bnx2x_softc *sc)
{
        uint32_t rc = bnx2x_fw_command(sc, DRV_MSG_CODE_UNLOAD_DONE,
                                     DRV_MSG_CODE_UNLOAD_SKIP_LINK_RESET);
        if (!rc) {
                PMD_DRV_LOG(NOTICE, "MCP response failure, aborting");
                return -1;
        }

        return 0;
}

static struct bnx2x_prev_list_node *bnx2x_prev_path_get_entry(struct bnx2x_softc *sc)
{
        struct bnx2x_prev_list_node *tmp;

        LIST_FOREACH(tmp, &bnx2x_prev_list, node) {
                if ((sc->pcie_bus == tmp->bus) &&
                    (sc->pcie_device == tmp->slot) &&
                    (SC_PATH(sc) == tmp->path)) {
                        return tmp;
                }
        }

        return NULL;
}

static uint8_t bnx2x_prev_is_path_marked(struct bnx2x_softc *sc)
{
        struct bnx2x_prev_list_node *tmp;
        int rc = FALSE;

        rte_spinlock_lock(&bnx2x_prev_mtx);

        tmp = bnx2x_prev_path_get_entry(sc);
        if (tmp) {
                if (tmp->aer) {
                        PMD_DRV_LOG(DEBUG,
                                    "Path %d/%d/%d was marked by AER",
                                    sc->pcie_bus, sc->pcie_device, SC_PATH(sc));
                } else {
                        rc = TRUE;
                        PMD_DRV_LOG(DEBUG,
                                    "Path %d/%d/%d was already cleaned from previous drivers",
                                    sc->pcie_bus, sc->pcie_device, SC_PATH(sc));
                }
        }

        rte_spinlock_unlock(&bnx2x_prev_mtx);

        return rc;
}

static int bnx2x_prev_mark_path(struct bnx2x_softc *sc, uint8_t after_undi)
{
        struct bnx2x_prev_list_node *tmp;

        rte_spinlock_lock(&bnx2x_prev_mtx);

        /* Check whether the entry for this path already exists */
        tmp = bnx2x_prev_path_get_entry(sc);
        if (tmp) {
                if (!tmp->aer) {
                        PMD_DRV_LOG(DEBUG,
                                    "Re-marking AER in path %d/%d/%d",
                                    sc->pcie_bus, sc->pcie_device, SC_PATH(sc));
                } else {
                        PMD_DRV_LOG(DEBUG,
                                    "Removing AER indication from path %d/%d/%d",
                                    sc->pcie_bus, sc->pcie_device, SC_PATH(sc));
                        tmp->aer = 0;
                }

                rte_spinlock_unlock(&bnx2x_prev_mtx);
                return 0;
        }

        rte_spinlock_unlock(&bnx2x_prev_mtx);

        /* Create an entry for this path and add it */
        tmp = rte_malloc("", sizeof(struct bnx2x_prev_list_node),
                         RTE_CACHE_LINE_SIZE);
        if (!tmp) {
                PMD_DRV_LOG(NOTICE, "Failed to allocate 'bnx2x_prev_list_node'");
                return -1;
        }

        tmp->bus = sc->pcie_bus;
        tmp->slot = sc->pcie_device;
        tmp->path = SC_PATH(sc);
        tmp->aer = 0;
        tmp->undi = after_undi ? (1 << SC_PORT(sc)) : 0;

        rte_spinlock_lock(&bnx2x_prev_mtx);

        LIST_INSERT_HEAD(&bnx2x_prev_list, tmp, node);

        rte_spinlock_unlock(&bnx2x_prev_mtx);

        return 0;
}

static int bnx2x_do_flr(struct bnx2x_softc *sc)
{
        int i;

        /* only E2 and onwards support FLR */
        if (CHIP_IS_E1x(sc)) {
                PMD_DRV_LOG(WARNING, "FLR not supported in E1H");
                return -1;
        }

        /* only bootcode REQ_BC_VER_4_INITIATE_FLR and onwards support flr */
        if (sc->devinfo.bc_ver < REQ_BC_VER_4_INITIATE_FLR) {
                PMD_DRV_LOG(WARNING,
                            "FLR not supported by BC_VER: 0x%08x",
                            sc->devinfo.bc_ver);
                return -1;
        }

        /* Wait for Transaction Pending bit clean */
        for (i = 0; i < 4; i++) {
                if (i) {
                        DELAY(((1 << (i - 1)) * 100) * 1000);
                }

                if (!bnx2x_is_pcie_pending(sc)) {
                        goto clear;
                }
        }

        PMD_DRV_LOG(NOTICE, "PCIE transaction is not cleared, "
                    "proceeding with reset anyway");

clear:
        bnx2x_fw_command(sc, DRV_MSG_CODE_INITIATE_FLR, 0);

        return 0;
}

struct bnx2x_mac_vals {
        uint32_t xmac_addr;
        uint32_t xmac_val;
        uint32_t emac_addr;
        uint32_t emac_val;
        uint32_t umac_addr;
        uint32_t umac_val;
        uint32_t bmac_addr;
        uint32_t bmac_val[2];
};

static void
bnx2x_prev_unload_close_mac(struct bnx2x_softc *sc, struct bnx2x_mac_vals *vals)
{
        uint32_t val, base_addr, offset, mask, reset_reg;
        uint8_t mac_stopped = FALSE;
        uint8_t port = SC_PORT(sc);
        uint32_t wb_data[2];

        /* reset addresses as they also mark which values were changed */
        vals->bmac_addr = 0;
        vals->umac_addr = 0;
        vals->xmac_addr = 0;
        vals->emac_addr = 0;

        reset_reg = REG_RD(sc, MISC_REG_RESET_REG_2);

        if (!CHIP_IS_E3(sc)) {
                val = REG_RD(sc, NIG_REG_BMAC0_REGS_OUT_EN + port * 4);
                mask = MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port;
                if ((mask & reset_reg) && val) {
                        base_addr = SC_PORT(sc) ? NIG_REG_INGRESS_BMAC1_MEM
                            : NIG_REG_INGRESS_BMAC0_MEM;
                        offset = CHIP_IS_E2(sc) ? BIGMAC2_REGISTER_BMAC_CONTROL
                            : BIGMAC_REGISTER_BMAC_CONTROL;

                        /*
                         * use rd/wr since we cannot use dmae. This is safe
                         * since MCP won't access the bus due to the request
                         * to unload, and no function on the path can be
                         * loaded at this time.
                         */
                        wb_data[0] = REG_RD(sc, base_addr + offset);
                        wb_data[1] = REG_RD(sc, base_addr + offset + 0x4);
                        vals->bmac_addr = base_addr + offset;
                        vals->bmac_val[0] = wb_data[0];
                        vals->bmac_val[1] = wb_data[1];
                        wb_data[0] &= ~ELINK_BMAC_CONTROL_RX_ENABLE;
                        REG_WR(sc, vals->bmac_addr, wb_data[0]);
                        REG_WR(sc, vals->bmac_addr + 0x4, wb_data[1]);
                }

                vals->emac_addr = NIG_REG_NIG_EMAC0_EN + SC_PORT(sc) * 4;
                vals->emac_val = REG_RD(sc, vals->emac_addr);
                REG_WR(sc, vals->emac_addr, 0);
                mac_stopped = TRUE;
        } else {
                if (reset_reg & MISC_REGISTERS_RESET_REG_2_XMAC) {
                        base_addr = SC_PORT(sc) ? GRCBASE_XMAC1 : GRCBASE_XMAC0;
                        val = REG_RD(sc, base_addr + XMAC_REG_PFC_CTRL_HI);
                        REG_WR(sc, base_addr + XMAC_REG_PFC_CTRL_HI,
                               val & ~(1 << 1));
                        REG_WR(sc, base_addr + XMAC_REG_PFC_CTRL_HI,
                               val | (1 << 1));
                        vals->xmac_addr = base_addr + XMAC_REG_CTRL;
                        vals->xmac_val = REG_RD(sc, vals->xmac_addr);
                        REG_WR(sc, vals->xmac_addr, 0);
                        mac_stopped = TRUE;
                }

                mask = MISC_REGISTERS_RESET_REG_2_UMAC0 << port;
                if (mask & reset_reg) {
                        base_addr = SC_PORT(sc) ? GRCBASE_UMAC1 : GRCBASE_UMAC0;
                        vals->umac_addr = base_addr + UMAC_REG_COMMAND_CONFIG;
                        vals->umac_val = REG_RD(sc, vals->umac_addr);
                        REG_WR(sc, vals->umac_addr, 0);
                        mac_stopped = TRUE;
                }
        }

        if (mac_stopped) {
                DELAY(20000);
        }
}

#define BNX2X_PREV_UNDI_PROD_ADDR(p)  (BAR_TSTRORM_INTMEM + 0x1508 + ((p) << 4))
#define BNX2X_PREV_UNDI_RCQ(val)      ((val) & 0xffff)
#define BNX2X_PREV_UNDI_BD(val)       ((val) >> 16 & 0xffff)
#define BNX2X_PREV_UNDI_PROD(rcq, bd) ((bd) << 16 | (rcq))

static void
bnx2x_prev_unload_undi_inc(struct bnx2x_softc *sc, uint8_t port, uint8_t inc)
{
        uint16_t rcq, bd;
        uint32_t tmp_reg = REG_RD(sc, BNX2X_PREV_UNDI_PROD_ADDR(port));

        rcq = BNX2X_PREV_UNDI_RCQ(tmp_reg) + inc;
        bd = BNX2X_PREV_UNDI_BD(tmp_reg) + inc;

        tmp_reg = BNX2X_PREV_UNDI_PROD(rcq, bd);
        REG_WR(sc, BNX2X_PREV_UNDI_PROD_ADDR(port), tmp_reg);
}

static int bnx2x_prev_unload_common(struct bnx2x_softc *sc)
{
        uint32_t reset_reg, tmp_reg = 0, rc;
        uint8_t prev_undi = FALSE;
        struct bnx2x_mac_vals mac_vals;
        uint32_t timer_count = 1000;
        uint32_t prev_brb;

        /*
         * It is possible a previous function received 'common' answer,
         * but hasn't loaded yet, therefore creating a scenario of
         * multiple functions receiving 'common' on the same path.
         */
        memset(&mac_vals, 0, sizeof(mac_vals));

        if (bnx2x_prev_is_path_marked(sc)) {
                return bnx2x_prev_mcp_done(sc);
        }

        reset_reg = REG_RD(sc, MISC_REG_RESET_REG_1);

        /* Reset should be performed after BRB is emptied */
        if (reset_reg & MISC_REGISTERS_RESET_REG_1_RST_BRB1) {
                /* Close the MAC Rx to prevent BRB from filling up */
                bnx2x_prev_unload_close_mac(sc, &mac_vals);

                /* close LLH filters towards the BRB */
                elink_set_rx_filter(&sc->link_params, 0);

                /*
                 * Check if the UNDI driver was previously loaded.
                 * UNDI driver initializes CID offset for normal bell to 0x7
                 */
                if (reset_reg & MISC_REGISTERS_RESET_REG_1_RST_DORQ) {
                        tmp_reg = REG_RD(sc, DORQ_REG_NORM_CID_OFST);
                        if (tmp_reg == 0x7) {
                                PMD_DRV_LOG(DEBUG, "UNDI previously loaded");
                                prev_undi = TRUE;
                                /* clear the UNDI indication */
                                REG_WR(sc, DORQ_REG_NORM_CID_OFST, 0);
                                /* clear possible idle check errors */
                                REG_RD(sc, NIG_REG_NIG_INT_STS_CLR_0);
                        }
                }

                /* wait until BRB is empty */
                tmp_reg = REG_RD(sc, BRB1_REG_NUM_OF_FULL_BLOCKS);
                while (timer_count) {
                        prev_brb = tmp_reg;

                        tmp_reg = REG_RD(sc, BRB1_REG_NUM_OF_FULL_BLOCKS);
                        if (!tmp_reg) {
                                break;
                        }

                        PMD_DRV_LOG(DEBUG, "BRB still has 0x%08x", tmp_reg);

                        /* reset timer as long as BRB actually gets emptied */
                        if (prev_brb > tmp_reg) {
                                timer_count = 1000;
                        } else {
                                timer_count--;
                        }

                        /* If UNDI resides in memory, manually increment it */
                        if (prev_undi) {
                                bnx2x_prev_unload_undi_inc(sc, SC_PORT(sc), 1);
                        }

                        DELAY(10);
                }

                if (!timer_count) {
                        PMD_DRV_LOG(NOTICE, "Failed to empty BRB");
                }
        }

        /* No packets are in the pipeline, path is ready for reset */
        bnx2x_reset_common(sc);

        if (mac_vals.xmac_addr) {
                REG_WR(sc, mac_vals.xmac_addr, mac_vals.xmac_val);
        }
        if (mac_vals.umac_addr) {
                REG_WR(sc, mac_vals.umac_addr, mac_vals.umac_val);
        }
        if (mac_vals.emac_addr) {
                REG_WR(sc, mac_vals.emac_addr, mac_vals.emac_val);
        }
        if (mac_vals.bmac_addr) {
                REG_WR(sc, mac_vals.bmac_addr, mac_vals.bmac_val[0]);
                REG_WR(sc, mac_vals.bmac_addr + 4, mac_vals.bmac_val[1]);
        }

        rc = bnx2x_prev_mark_path(sc, prev_undi);
        if (rc) {
                bnx2x_prev_mcp_done(sc);
                return rc;
        }

        return bnx2x_prev_mcp_done(sc);
}

static int bnx2x_prev_unload_uncommon(struct bnx2x_softc *sc)
{
        int rc;

        /* Test if previous unload process was already finished for this path */
        if (bnx2x_prev_is_path_marked(sc)) {
                return bnx2x_prev_mcp_done(sc);
        }

        /*
         * If function has FLR capabilities, and existing FW version matches
         * the one required, then FLR will be sufficient to clean any residue
         * left by previous driver
         */
        rc = bnx2x_nic_load_analyze_req(sc, FW_MSG_CODE_DRV_LOAD_FUNCTION);
        if (!rc) {
                /* fw version is good */
                rc = bnx2x_do_flr(sc);
        }

        if (!rc) {
                /* FLR was performed */
                return 0;
        }

        PMD_DRV_LOG(INFO, "Could not FLR");

        /* Close the MCP request, return failure */
        rc = bnx2x_prev_mcp_done(sc);
        if (!rc) {
                rc = BNX2X_PREV_WAIT_NEEDED;
        }

        return rc;
}

static int bnx2x_prev_unload(struct bnx2x_softc *sc)
{
        int time_counter = 10;
        uint32_t fw, hw_lock_reg, hw_lock_val;
        uint32_t rc = 0;

        /*
         * Clear HW from errors which may have resulted from an interrupted
         * DMAE transaction.
         */
        bnx2x_prev_interrupted_dmae(sc);

        /* Release previously held locks */
        if (SC_FUNC(sc) <= 5)
                hw_lock_reg = (MISC_REG_DRIVER_CONTROL_1 + SC_FUNC(sc) * 8);
        else
                hw_lock_reg =
                    (MISC_REG_DRIVER_CONTROL_7 + (SC_FUNC(sc) - 6) * 8);

        hw_lock_val = (REG_RD(sc, hw_lock_reg));
        if (hw_lock_val) {
                if (hw_lock_val & HW_LOCK_RESOURCE_NVRAM) {
                        REG_WR(sc, MCP_REG_MCPR_NVM_SW_ARB,
                               (MCPR_NVM_SW_ARB_ARB_REQ_CLR1 << SC_PORT(sc)));
                }
                REG_WR(sc, hw_lock_reg, 0xffffffff);
        }

        if (MCPR_ACCESS_LOCK_LOCK & REG_RD(sc, MCP_REG_MCPR_ACCESS_LOCK)) {
                REG_WR(sc, MCP_REG_MCPR_ACCESS_LOCK, 0);
        }

        do {
                /* Lock MCP using an unload request */
                fw = bnx2x_fw_command(sc, DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS, 0);
                if (!fw) {
                        PMD_DRV_LOG(NOTICE, "MCP response failure, aborting");
                        rc = -1;
                        break;
                }

                if (fw == FW_MSG_CODE_DRV_UNLOAD_COMMON) {
                        rc = bnx2x_prev_unload_common(sc);
                        break;
                }

                /* non-common reply from MCP might require looping */
                rc = bnx2x_prev_unload_uncommon(sc);
                if (rc != BNX2X_PREV_WAIT_NEEDED) {
                        break;
                }

                DELAY(20000);
        } while (--time_counter);

        if (!time_counter || rc) {
                PMD_DRV_LOG(NOTICE, "Failed to unload previous driver!");
                rc = -1;
        }

        return rc;
}

static void
bnx2x_dcbx_set_state(struct bnx2x_softc *sc, uint8_t dcb_on, uint32_t dcbx_enabled)
{
        if (!CHIP_IS_E1x(sc)) {
                sc->dcb_state = dcb_on;
                sc->dcbx_enabled = dcbx_enabled;
        } else {
                sc->dcb_state = FALSE;
                sc->dcbx_enabled = BNX2X_DCBX_ENABLED_INVALID;
        }
        PMD_DRV_LOG(DEBUG,
                    "DCB state [%s:%s]",
                    dcb_on ? "ON" : "OFF",
                    (dcbx_enabled == BNX2X_DCBX_ENABLED_OFF) ? "user-mode" :
                    (dcbx_enabled ==
                     BNX2X_DCBX_ENABLED_ON_NEG_OFF) ? "on-chip static"
                    : (dcbx_enabled ==
                       BNX2X_DCBX_ENABLED_ON_NEG_ON) ?
                    "on-chip with negotiation" : "invalid");
}

static int bnx2x_set_qm_cid_count(struct bnx2x_softc *sc)
{
        int cid_count = BNX2X_L2_MAX_CID(sc);

        if (CNIC_SUPPORT(sc)) {
                cid_count += CNIC_CID_MAX;
        }

        return roundup(cid_count, QM_CID_ROUND);
}

static void bnx2x_init_multi_cos(struct bnx2x_softc *sc)
{
        int pri, cos;

        uint32_t pri_map = 0;

        for (pri = 0; pri < BNX2X_MAX_PRIORITY; pri++) {
                cos = ((pri_map & (0xf << (pri * 4))) >> (pri * 4));
                if (cos < sc->max_cos) {
                        sc->prio_to_cos[pri] = cos;
                } else {
                        PMD_DRV_LOG(WARNING,
                                    "Invalid COS %d for priority %d "
                                    "(max COS is %d), setting to 0", cos, pri,
                                    (sc->max_cos - 1));
                        sc->prio_to_cos[pri] = 0;
                }
        }
}

static int bnx2x_pci_get_caps(struct bnx2x_softc *sc)
{
        struct {
                uint8_t id;
                uint8_t next;
        } pci_cap;
        uint16_t status;
        struct bnx2x_pci_cap *cap;

        cap = sc->pci_caps = rte_zmalloc("caps", sizeof(struct bnx2x_pci_cap),
                                         RTE_CACHE_LINE_SIZE);
        if (!cap) {
                PMD_DRV_LOG(NOTICE, "Failed to allocate memory");
                return -ENOMEM;
        }

#ifndef __FreeBSD__
        pci_read(sc, PCI_STATUS, &status, 2);
        if (!(status & PCI_STATUS_CAP_LIST)) {
#else
        pci_read(sc, PCIR_STATUS, &status, 2);
        if (!(status & PCIM_STATUS_CAPPRESENT)) {
#endif
                PMD_DRV_LOG(NOTICE, "PCIe capability reading failed");
                return -1;
        }

#ifndef __FreeBSD__
        pci_read(sc, PCI_CAPABILITY_LIST, &pci_cap.next, 1);
#else
        pci_read(sc, PCIR_CAP_PTR, &pci_cap.next, 1);
#endif
        while (pci_cap.next) {
                cap->addr = pci_cap.next & ~3;
                pci_read(sc, pci_cap.next & ~3, &pci_cap, 2);
                if (pci_cap.id == 0xff)
                        break;
                cap->id = pci_cap.id;
                cap->type = BNX2X_PCI_CAP;
                cap->next = rte_zmalloc("pci_cap",
                                        sizeof(struct bnx2x_pci_cap),
                                        RTE_CACHE_LINE_SIZE);
                if (!cap->next) {
                        PMD_DRV_LOG(NOTICE, "Failed to allocate memory");
                        return -ENOMEM;
                }
                cap = cap->next;
        }

        return 0;
}

static void bnx2x_init_rte(struct bnx2x_softc *sc)
{
        if (IS_VF(sc)) {
                sc->max_tx_queues = min(BNX2X_VF_MAX_QUEUES_PER_VF,
                                        sc->igu_sb_cnt);
                sc->max_rx_queues = min(BNX2X_VF_MAX_QUEUES_PER_VF,
                                        sc->igu_sb_cnt);
        } else {
                sc->max_rx_queues = BNX2X_MAX_RSS_COUNT(sc);
                sc->max_tx_queues = sc->max_rx_queues;
        }
}

#define FW_HEADER_LEN 104
#define FW_NAME_57711 "/lib/firmware/bnx2x/bnx2x-e1h-7.2.51.0.fw"
#define FW_NAME_57810 "/lib/firmware/bnx2x/bnx2x-e2-7.2.51.0.fw"

void bnx2x_load_firmware(struct bnx2x_softc *sc)
{
        const char *fwname;
        int f;
        struct stat st;

        fwname = sc->devinfo.device_id == CHIP_NUM_57711
                ? FW_NAME_57711 : FW_NAME_57810;
        f = open(fwname, O_RDONLY);
        if (f < 0) {
                PMD_DRV_LOG(NOTICE, "Can't open firmware file");
                return;
        }

        if (fstat(f, &st) < 0) {
                PMD_DRV_LOG(NOTICE, "Can't stat firmware file");
                close(f);
                return;
        }

        sc->firmware = rte_zmalloc("bnx2x_fw", st.st_size, RTE_CACHE_LINE_SIZE);
        if (!sc->firmware) {
                PMD_DRV_LOG(NOTICE, "Can't allocate memory for firmware");
                close(f);
                return;
        }

        if (read(f, sc->firmware, st.st_size) != st.st_size) {
                PMD_DRV_LOG(NOTICE, "Can't read firmware data");
                close(f);
                return;
        }
        close(f);

        sc->fw_len = st.st_size;
        if (sc->fw_len < FW_HEADER_LEN) {
                PMD_DRV_LOG(NOTICE, "Invalid fw size: %" PRIu64, sc->fw_len);
                return;
        }
        PMD_DRV_LOG(DEBUG, "fw_len = %" PRIu64, sc->fw_len);
}

static void
bnx2x_data_to_init_ops(uint8_t * data, struct raw_op *dst, uint32_t len)
{
        uint32_t *src = (uint32_t *) data;
        uint32_t i, j, tmp;

        for (i = 0, j = 0; i < len / 8; ++i, j += 2) {
                tmp = rte_be_to_cpu_32(src[j]);
                dst[i].op = (tmp >> 24) & 0xFF;
                dst[i].offset = tmp & 0xFFFFFF;
                dst[i].raw_data = rte_be_to_cpu_32(src[j + 1]);
        }
}

static void
bnx2x_data_to_init_offsets(uint8_t * data, uint16_t * dst, uint32_t len)
{
        uint16_t *src = (uint16_t *) data;
        uint32_t i;

        for (i = 0; i < len / 2; ++i)
                dst[i] = rte_be_to_cpu_16(src[i]);
}

static void bnx2x_data_to_init_data(uint8_t * data, uint32_t * dst, uint32_t len)
{
        uint32_t *src = (uint32_t *) data;
        uint32_t i;

        for (i = 0; i < len / 4; ++i)
                dst[i] = rte_be_to_cpu_32(src[i]);
}

static void bnx2x_data_to_iro_array(uint8_t * data, struct iro *dst, uint32_t len)
{
        uint32_t *src = (uint32_t *) data;
        uint32_t i, j, tmp;

        for (i = 0, j = 0; i < len / sizeof(struct iro); ++i, ++j) {
                dst[i].base = rte_be_to_cpu_32(src[j++]);
                tmp = rte_be_to_cpu_32(src[j]);
                dst[i].m1 = (tmp >> 16) & 0xFFFF;
                dst[i].m2 = tmp & 0xFFFF;
                ++j;
                tmp = rte_be_to_cpu_32(src[j]);
                dst[i].m3 = (tmp >> 16) & 0xFFFF;
                dst[i].size = tmp & 0xFFFF;
        }
}

/*
* Device attach function.
*
* Allocates device resources, performs secondary chip identification, and
* initializes driver instance variables. This function is called from driver
* load after a successful probe.
*
* Returns:
*   0 = Success, >0 = Failure
*/
int bnx2x_attach(struct bnx2x_softc *sc)
{
        int rc;

        PMD_DRV_LOG(DEBUG, "Starting attach...");

        rc = bnx2x_pci_get_caps(sc);
        if (rc) {
                PMD_DRV_LOG(NOTICE, "PCIe caps reading was failed");
                return rc;
        }

        sc->state = BNX2X_STATE_CLOSED;

        pci_write_long(sc, PCICFG_GRC_ADDRESS, PCICFG_VENDOR_ID_OFFSET);

        sc->igu_base_addr = IS_VF(sc) ? PXP_VF_ADDR_IGU_START : BAR_IGU_INTMEM;

        /* get PCI capabilites */
        bnx2x_probe_pci_caps(sc);

        if (sc->devinfo.pcie_msix_cap_reg != 0) {
                uint32_t val;
                pci_read(sc,
                         (sc->devinfo.pcie_msix_cap_reg + PCIR_MSIX_CTRL), &val,
                         2);
                sc->igu_sb_cnt = (val & PCIM_MSIXCTRL_TABLE_SIZE) + 1;
        } else {
                sc->igu_sb_cnt = 1;
        }

        /* Init RTE stuff */
        bnx2x_init_rte(sc);

        if (IS_PF(sc)) {
                /* Enable internal target-read (in case we are probed after PF
                 * FLR). Must be done prior to any BAR read access. Only for
                 * 57712 and up
                 */
                if (!CHIP_IS_E1x(sc)) {
                        REG_WR(sc, PGLUE_B_REG_INTERNAL_PFID_ENABLE_TARGET_READ,
                               1);
                        DELAY(200000);
                }

                /* get device info and set params */
                if (bnx2x_get_device_info(sc) != 0) {
                        PMD_DRV_LOG(NOTICE, "getting device info");
                        return -ENXIO;
                }

/* get phy settings from shmem and 'and' against admin settings */
                bnx2x_get_phy_info(sc);
        } else {
                /* Left mac of VF unfilled, PF should set it for VF */
                memset(sc->link_params.mac_addr, 0, ETHER_ADDR_LEN);
        }

        sc->wol = 0;

        /* set the default MTU (changed via ifconfig) */
        sc->mtu = ETHER_MTU;

        bnx2x_set_modes_bitmap(sc);

        /* need to reset chip if UNDI was active */
        if (IS_PF(sc) && !BNX2X_NOMCP(sc)) {
/* init fw_seq */
                sc->fw_seq =
                    (SHMEM_RD(sc, func_mb[SC_FW_MB_IDX(sc)].drv_mb_header) &
                     DRV_MSG_SEQ_NUMBER_MASK);
                bnx2x_prev_unload(sc);
        }

        bnx2x_dcbx_set_state(sc, FALSE, BNX2X_DCBX_ENABLED_OFF);

        /* calculate qm_cid_count */
        sc->qm_cid_count = bnx2x_set_qm_cid_count(sc);

        sc->max_cos = 1;
        bnx2x_init_multi_cos(sc);

        return 0;
}

static void
bnx2x_igu_ack_sb(struct bnx2x_softc *sc, uint8_t igu_sb_id, uint8_t segment,
               uint16_t index, uint8_t op, uint8_t update)
{
        uint32_t igu_addr = sc->igu_base_addr;
        igu_addr += (IGU_CMD_INT_ACK_BASE + igu_sb_id) * 8;
        bnx2x_igu_ack_sb_gen(sc, segment, index, op, update, igu_addr);
}

static void
bnx2x_ack_sb(struct bnx2x_softc *sc, uint8_t igu_sb_id, uint8_t storm,
           uint16_t index, uint8_t op, uint8_t update)
{
        if (unlikely(sc->devinfo.int_block == INT_BLOCK_HC))
                bnx2x_hc_ack_sb(sc, igu_sb_id, storm, index, op, update);
        else {
                uint8_t segment;
                if (CHIP_INT_MODE_IS_BC(sc)) {
                        segment = storm;
                } else if (igu_sb_id != sc->igu_dsb_id) {
                        segment = IGU_SEG_ACCESS_DEF;
                } else if (storm == ATTENTION_ID) {
                        segment = IGU_SEG_ACCESS_ATTN;
                } else {
                        segment = IGU_SEG_ACCESS_DEF;
                }
                bnx2x_igu_ack_sb(sc, igu_sb_id, segment, index, op, update);
        }
}

static void
bnx2x_igu_clear_sb_gen(struct bnx2x_softc *sc, uint8_t func, uint8_t idu_sb_id,
                     uint8_t is_pf)
{
        uint32_t data, ctl, cnt = 100;
        uint32_t igu_addr_data = IGU_REG_COMMAND_REG_32LSB_DATA;
        uint32_t igu_addr_ctl = IGU_REG_COMMAND_REG_CTRL;
        uint32_t igu_addr_ack = IGU_REG_CSTORM_TYPE_0_SB_CLEANUP +
            (idu_sb_id / 32) * 4;
        uint32_t sb_bit = 1 << (idu_sb_id % 32);
        uint32_t func_encode = func |
            (is_pf ? 1 : 0) << IGU_FID_ENCODE_IS_PF_SHIFT;
        uint32_t addr_encode = IGU_CMD_E2_PROD_UPD_BASE + idu_sb_id;

        /* Not supported in BC mode */
        if (CHIP_INT_MODE_IS_BC(sc)) {
                return;
        }

        data = ((IGU_USE_REGISTER_cstorm_type_0_sb_cleanup <<
                 IGU_REGULAR_CLEANUP_TYPE_SHIFT) |
                IGU_REGULAR_CLEANUP_SET | IGU_REGULAR_BCLEANUP);

        ctl = ((addr_encode << IGU_CTRL_REG_ADDRESS_SHIFT) |
               (func_encode << IGU_CTRL_REG_FID_SHIFT) |
               (IGU_CTRL_CMD_TYPE_WR << IGU_CTRL_REG_TYPE_SHIFT));

        REG_WR(sc, igu_addr_data, data);

        mb();

        PMD_DRV_LOG(DEBUG, "write 0x%08x to IGU(via GRC) addr 0x%x",
                    ctl, igu_addr_ctl);
        REG_WR(sc, igu_addr_ctl, ctl);

        mb();

        /* wait for clean up to finish */
        while (!(REG_RD(sc, igu_addr_ack) & sb_bit) && --cnt) {
                DELAY(20000);
        }

        if (!(REG_RD(sc, igu_addr_ack) & sb_bit)) {
                PMD_DRV_LOG(DEBUG,
                            "Unable to finish IGU cleanup: "
                            "idu_sb_id %d offset %d bit %d (cnt %d)",
                            idu_sb_id, idu_sb_id / 32, idu_sb_id % 32, cnt);
        }
}

static void bnx2x_igu_clear_sb(struct bnx2x_softc *sc, uint8_t idu_sb_id)
{
        bnx2x_igu_clear_sb_gen(sc, SC_FUNC(sc), idu_sb_id, TRUE /*PF*/);
}

/*******************/
/* ECORE CALLBACKS */
/*******************/

static void bnx2x_reset_common(struct bnx2x_softc *sc)
{
        uint32_t val = 0x1400;

        PMD_INIT_FUNC_TRACE();

        /* reset_common */
        REG_WR(sc, (GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR),
               0xd3ffff7f);

        if (CHIP_IS_E3(sc)) {
                val |= MISC_REGISTERS_RESET_REG_2_MSTAT0;
                val |= MISC_REGISTERS_RESET_REG_2_MSTAT1;
        }

        REG_WR(sc, (GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR), val);
}

static void bnx2x_common_init_phy(struct bnx2x_softc *sc)
{
        uint32_t shmem_base[2];
        uint32_t shmem2_base[2];

        /* Avoid common init in case MFW supports LFA */
        if (SHMEM2_RD(sc, size) >
            (uint32_t) offsetof(struct shmem2_region,
                                lfa_host_addr[SC_PORT(sc)])) {
                return;
        }

        shmem_base[0] = sc->devinfo.shmem_base;
        shmem2_base[0] = sc->devinfo.shmem2_base;

        if (!CHIP_IS_E1x(sc)) {
                shmem_base[1] = SHMEM2_RD(sc, other_shmem_base_addr);
                shmem2_base[1] = SHMEM2_RD(sc, other_shmem2_base_addr);
        }

        elink_common_init_phy(sc, shmem_base, shmem2_base,
                              sc->devinfo.chip_id, 0);
}

static void bnx2x_pf_disable(struct bnx2x_softc *sc)
{
        uint32_t val = REG_RD(sc, IGU_REG_PF_CONFIGURATION);

        val &= ~IGU_PF_CONF_FUNC_EN;

        REG_WR(sc, IGU_REG_PF_CONFIGURATION, val);
        REG_WR(sc, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 0);
        REG_WR(sc, CFC_REG_WEAK_ENABLE_PF, 0);
}

static void bnx2x_init_pxp(struct bnx2x_softc *sc)
{
        uint16_t devctl;
        int r_order, w_order;

        devctl = bnx2x_pcie_capability_read(sc, PCIR_EXPRESS_DEVICE_CTL);

        w_order = ((devctl & PCIM_EXP_CTL_MAX_PAYLOAD) >> 5);
        r_order = ((devctl & PCIM_EXP_CTL_MAX_READ_REQUEST) >> 12);

        ecore_init_pxp_arb(sc, r_order, w_order);
}

static uint32_t bnx2x_get_pretend_reg(struct bnx2x_softc *sc)
{
        uint32_t base = PXP2_REG_PGL_PRETEND_FUNC_F0;
        uint32_t stride = (PXP2_REG_PGL_PRETEND_FUNC_F1 - base);
        return base + (SC_ABS_FUNC(sc)) * stride;
}

/*
 * Called only on E1H or E2.
 * When pretending to be PF, the pretend value is the function number 0..7.
 * When pretending to be VF, the pretend val is the PF-num:VF-valid:ABS-VFID
 * combination.
 */
static int bnx2x_pretend_func(struct bnx2x_softc *sc, uint16_t pretend_func_val)
{
        uint32_t pretend_reg;

        if (CHIP_IS_E1H(sc) && (pretend_func_val > E1H_FUNC_MAX))
                return -1;

        /* get my own pretend register */
        pretend_reg = bnx2x_get_pretend_reg(sc);
        REG_WR(sc, pretend_reg, pretend_func_val);
        REG_RD(sc, pretend_reg);
        return 0;
}

static void bnx2x_setup_fan_failure_detection(struct bnx2x_softc *sc)
{
        int is_required;
        uint32_t val;
        int port;

        is_required = 0;
        val = (SHMEM_RD(sc, dev_info.shared_hw_config.config2) &
               SHARED_HW_CFG_FAN_FAILURE_MASK);

        if (val == SHARED_HW_CFG_FAN_FAILURE_ENABLED) {
                is_required = 1;
        }
        /*
         * The fan failure mechanism is usually related to the PHY type since
         * the power consumption of the board is affected by the PHY. Currently,
         * fan is required for most designs with SFX7101, BNX2X8727 and BNX2X8481.
         */
        else if (val == SHARED_HW_CFG_FAN_FAILURE_PHY_TYPE) {
                for (port = PORT_0; port < PORT_MAX; port++) {
                        is_required |= elink_fan_failure_det_req(sc,
                                                                 sc->
                                                                 devinfo.shmem_base,
                                                                 sc->
                                                                 devinfo.shmem2_base,
                                                                 port);
                }
        }

        if (is_required == 0) {
                return;
        }

        /* Fan failure is indicated by SPIO 5 */
        bnx2x_set_spio(sc, MISC_SPIO_SPIO5, MISC_SPIO_INPUT_HI_Z);

        /* set to active low mode */
        val = REG_RD(sc, MISC_REG_SPIO_INT);
        val |= (MISC_SPIO_SPIO5 << MISC_SPIO_INT_OLD_SET_POS);
        REG_WR(sc, MISC_REG_SPIO_INT, val);

        /* enable interrupt to signal the IGU */
        val = REG_RD(sc, MISC_REG_SPIO_EVENT_EN);
        val |= MISC_SPIO_SPIO5;
        REG_WR(sc, MISC_REG_SPIO_EVENT_EN, val);
}

static void bnx2x_enable_blocks_attention(struct bnx2x_softc *sc)
{
        uint32_t val;

        REG_WR(sc, PXP_REG_PXP_INT_MASK_0, 0);
        if (!CHIP_IS_E1x(sc)) {
                REG_WR(sc, PXP_REG_PXP_INT_MASK_1, 0x40);
        } else {
                REG_WR(sc, PXP_REG_PXP_INT_MASK_1, 0);
        }
        REG_WR(sc, DORQ_REG_DORQ_INT_MASK, 0);
        REG_WR(sc, CFC_REG_CFC_INT_MASK, 0);
        /*
         * mask read length error interrupts in brb for parser
         * (parsing unit and 'checksum and crc' unit)
         * these errors are legal (PU reads fixed length and CAC can cause
         * read length error on truncated packets)
         */
        REG_WR(sc, BRB1_REG_BRB1_INT_MASK, 0xFC00);
        REG_WR(sc, QM_REG_QM_INT_MASK, 0);
        REG_WR(sc, TM_REG_TM_INT_MASK, 0);
        REG_WR(sc, XSDM_REG_XSDM_INT_MASK_0, 0);
        REG_WR(sc, XSDM_REG_XSDM_INT_MASK_1, 0);
        REG_WR(sc, XCM_REG_XCM_INT_MASK, 0);
        /*      REG_WR(sc, XSEM_REG_XSEM_INT_MASK_0, 0); */
        /*      REG_WR(sc, XSEM_REG_XSEM_INT_MASK_1, 0); */
        REG_WR(sc, USDM_REG_USDM_INT_MASK_0, 0);
        REG_WR(sc, USDM_REG_USDM_INT_MASK_1, 0);
        REG_WR(sc, UCM_REG_UCM_INT_MASK, 0);
        /*      REG_WR(sc, USEM_REG_USEM_INT_MASK_0, 0); */
        /*      REG_WR(sc, USEM_REG_USEM_INT_MASK_1, 0); */
        REG_WR(sc, GRCBASE_UPB + PB_REG_PB_INT_MASK, 0);
        REG_WR(sc, CSDM_REG_CSDM_INT_MASK_0, 0);
        REG_WR(sc, CSDM_REG_CSDM_INT_MASK_1, 0);
        REG_WR(sc, CCM_REG_CCM_INT_MASK, 0);
        /*      REG_WR(sc, CSEM_REG_CSEM_INT_MASK_0, 0); */
        /*      REG_WR(sc, CSEM_REG_CSEM_INT_MASK_1, 0); */

        val = (PXP2_PXP2_INT_MASK_0_REG_PGL_CPL_AFT |
               PXP2_PXP2_INT_MASK_0_REG_PGL_CPL_OF |
               PXP2_PXP2_INT_MASK_0_REG_PGL_PCIE_ATTN);
        if (!CHIP_IS_E1x(sc)) {
                val |= (PXP2_PXP2_INT_MASK_0_REG_PGL_READ_BLOCKED |
                        PXP2_PXP2_INT_MASK_0_REG_PGL_WRITE_BLOCKED);
        }
        REG_WR(sc, PXP2_REG_PXP2_INT_MASK_0, val);

        REG_WR(sc, TSDM_REG_TSDM_INT_MASK_0, 0);
        REG_WR(sc, TSDM_REG_TSDM_INT_MASK_1, 0);
        REG_WR(sc, TCM_REG_TCM_INT_MASK, 0);
        /*      REG_WR(sc, TSEM_REG_TSEM_INT_MASK_0, 0); */

        if (!CHIP_IS_E1x(sc)) {
/* enable VFC attentions: bits 11 and 12, bits 31:13 reserved */
                REG_WR(sc, TSEM_REG_TSEM_INT_MASK_1, 0x07ff);
        }

        REG_WR(sc, CDU_REG_CDU_INT_MASK, 0);
        REG_WR(sc, DMAE_REG_DMAE_INT_MASK, 0);
        /*      REG_WR(sc, MISC_REG_MISC_INT_MASK, 0); */
        REG_WR(sc, PBF_REG_PBF_INT_MASK, 0x18); /* bit 3,4 masked */
}

/**
 * bnx2x_init_hw_common - initialize the HW at the COMMON phase.
 *
 * @sc:     driver handle
 */
static int bnx2x_init_hw_common(struct bnx2x_softc *sc)
{
        uint8_t abs_func_id;
        uint32_t val;

        PMD_DRV_LOG(DEBUG, "starting common init for func %d", SC_ABS_FUNC(sc));

        /*
         * take the RESET lock to protect undi_unload flow from accessing
         * registers while we are resetting the chip
         */
        bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_RESET);

        bnx2x_reset_common(sc);

        REG_WR(sc, (GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET), 0xffffffff);

        val = 0xfffc;
        if (CHIP_IS_E3(sc)) {
                val |= MISC_REGISTERS_RESET_REG_2_MSTAT0;
                val |= MISC_REGISTERS_RESET_REG_2_MSTAT1;
        }

        REG_WR(sc, (GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET), val);

        bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_RESET);

        ecore_init_block(sc, BLOCK_MISC, PHASE_COMMON);

        if (!CHIP_IS_E1x(sc)) {
/*
 * 4-port mode or 2-port mode we need to turn off master-enable for
 * everyone. After that we turn it back on for self. So, we disregard
 * multi-function, and always disable all functions on the given path,
 * this means 0,2,4,6 for path 0 and 1,3,5,7 for path 1
 */
                for (abs_func_id = SC_PATH(sc);
                     abs_func_id < (E2_FUNC_MAX * 2); abs_func_id += 2) {
                        if (abs_func_id == SC_ABS_FUNC(sc)) {
                                REG_WR(sc,
                                       PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER,
                                       1);
                                continue;
                        }

                        bnx2x_pretend_func(sc, abs_func_id);

                        /* clear pf enable */
                        bnx2x_pf_disable(sc);

                        bnx2x_pretend_func(sc, SC_ABS_FUNC(sc));
                }
        }

        ecore_init_block(sc, BLOCK_PXP, PHASE_COMMON);

        ecore_init_block(sc, BLOCK_PXP2, PHASE_COMMON);
        bnx2x_init_pxp(sc);

#ifdef __BIG_ENDIAN
        REG_WR(sc, PXP2_REG_RQ_QM_ENDIAN_M, 1);
        REG_WR(sc, PXP2_REG_RQ_TM_ENDIAN_M, 1);
        REG_WR(sc, PXP2_REG_RQ_SRC_ENDIAN_M, 1);
        REG_WR(sc, PXP2_REG_RQ_CDU_ENDIAN_M, 1);
        REG_WR(sc, PXP2_REG_RQ_DBG_ENDIAN_M, 1);
        /* make sure this value is 0 */
        REG_WR(sc, PXP2_REG_RQ_HC_ENDIAN_M, 0);

        //REG_WR(sc, PXP2_REG_RD_PBF_SWAP_MODE, 1);
        REG_WR(sc, PXP2_REG_RD_QM_SWAP_MODE, 1);
        REG_WR(sc, PXP2_REG_RD_TM_SWAP_MODE, 1);
        REG_WR(sc, PXP2_REG_RD_SRC_SWAP_MODE, 1);
        REG_WR(sc, PXP2_REG_RD_CDURD_SWAP_MODE, 1);
#endif

        ecore_ilt_init_page_size(sc, INITOP_SET);

        if (CHIP_REV_IS_FPGA(sc) && CHIP_IS_E1H(sc)) {
                REG_WR(sc, PXP2_REG_PGL_TAGS_LIMIT, 0x1);
        }

        /* let the HW do it's magic... */
        DELAY(100000);

        /* finish PXP init */

        val = REG_RD(sc, PXP2_REG_RQ_CFG_DONE);
        if (val != 1) {
                PMD_DRV_LOG(NOTICE, "PXP2 CFG failed");
                return -1;
        }
        val = REG_RD(sc, PXP2_REG_RD_INIT_DONE);
        if (val != 1) {
                PMD_DRV_LOG(NOTICE, "PXP2 RD_INIT failed");
                return -1;
        }

        /*
         * Timer bug workaround for E2 only. We need to set the entire ILT to have
         * entries with value "0" and valid bit on. This needs to be done by the
         * first PF that is loaded in a path (i.e. common phase)
         */
        if (!CHIP_IS_E1x(sc)) {
/*
 * In E2 there is a bug in the timers block that can cause function 6 / 7
 * (i.e. vnic3) to start even if it is marked as "scan-off".
 * This occurs when a different function (func2,3) is being marked
 * as "scan-off". Real-life scenario for example: if a driver is being
 * load-unloaded while func6,7 are down. This will cause the timer to access
 * the ilt, translate to a logical address and send a request to read/write.
 * Since the ilt for the function that is down is not valid, this will cause
 * a translation error which is unrecoverable.
 * The Workaround is intended to make sure that when this happens nothing
 * fatal will occur. The workaround:
 *  1.  First PF driver which loads on a path will:
 *      a.  After taking the chip out of reset, by using pretend,
 *          it will write "0" to the following registers of
 *          the other vnics.
 *          REG_WR(pdev, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 0);
 *          REG_WR(pdev, CFC_REG_WEAK_ENABLE_PF,0);
 *          REG_WR(pdev, CFC_REG_STRONG_ENABLE_PF,0);
 *          And for itself it will write '1' to
 *          PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER to enable
 *          dmae-operations (writing to pram for example.)
 *          note: can be done for only function 6,7 but cleaner this
 *            way.
 *      b.  Write zero+valid to the entire ILT.
 *      c.  Init the first_timers_ilt_entry, last_timers_ilt_entry of
 *          VNIC3 (of that port). The range allocated will be the
 *          entire ILT. This is needed to prevent  ILT range error.
 *  2.  Any PF driver load flow:
 *      a.  ILT update with the physical addresses of the allocated
 *          logical pages.
 *      b.  Wait 20msec. - note that this timeout is needed to make
 *          sure there are no requests in one of the PXP internal
 *          queues with "old" ILT addresses.
 *      c.  PF enable in the PGLC.
 *      d.  Clear the was_error of the PF in the PGLC. (could have
 *          occurred while driver was down)
 *      e.  PF enable in the CFC (WEAK + STRONG)
 *      f.  Timers scan enable
 *  3.  PF driver unload flow:
 *      a.  Clear the Timers scan_en.
 *      b.  Polling for scan_on=0 for that PF.
 *      c.  Clear the PF enable bit in the PXP.
 *      d.  Clear the PF enable in the CFC (WEAK + STRONG)
 *      e.  Write zero+valid to all ILT entries (The valid bit must
 *          stay set)
 *      f.  If this is VNIC 3 of a port then also init
 *          first_timers_ilt_entry to zero and last_timers_ilt_entry
 *          to the last enrty in the ILT.
 *
 *      Notes:
 *      Currently the PF error in the PGLC is non recoverable.
 *      In the future the there will be a recovery routine for this error.
 *      Currently attention is masked.
 *      Having an MCP lock on the load/unload process does not guarantee that
 *      there is no Timer disable during Func6/7 enable. This is because the
 *      Timers scan is currently being cleared by the MCP on FLR.
 *      Step 2.d can be done only for PF6/7 and the driver can also check if
 *      there is error before clearing it. But the flow above is simpler and
 *      more general.
 *      All ILT entries are written by zero+valid and not just PF6/7
 *      ILT entries since in the future the ILT entries allocation for
 *      PF-s might be dynamic.
 */
                struct ilt_client_info ilt_cli;
                struct ecore_ilt ilt;

                memset(&ilt_cli, 0, sizeof(struct ilt_client_info));
                memset(&ilt, 0, sizeof(struct ecore_ilt));

/* initialize dummy TM client */
                ilt_cli.start = 0;
                ilt_cli.end = ILT_NUM_PAGE_ENTRIES - 1;
                ilt_cli.client_num = ILT_CLIENT_TM;

/*
 * Step 1: set zeroes to all ilt page entries with valid bit on
 * Step 2: set the timers first/last ilt entry to point
 * to the entire range to prevent ILT range error for 3rd/4th
 * vnic (this code assumes existence of the vnic)
 *
 * both steps performed by call to ecore_ilt_client_init_op()
 * with dummy TM client
 *
 * we must use pretend since PXP2_REG_RQ_##blk##_FIRST_ILT
 * and his brother are split registers
 */

                bnx2x_pretend_func(sc, (SC_PATH(sc) + 6));
                ecore_ilt_client_init_op_ilt(sc, &ilt, &ilt_cli, INITOP_CLEAR);
                bnx2x_pretend_func(sc, SC_ABS_FUNC(sc));

                REG_WR(sc, PXP2_REG_RQ_DRAM_ALIGN, BNX2X_PXP_DRAM_ALIGN);
                REG_WR(sc, PXP2_REG_RQ_DRAM_ALIGN_RD, BNX2X_PXP_DRAM_ALIGN);
                REG_WR(sc, PXP2_REG_RQ_DRAM_ALIGN_SEL, 1);
        }

        REG_WR(sc, PXP2_REG_RQ_DISABLE_INPUTS, 0);
        REG_WR(sc, PXP2_REG_RD_DISABLE_INPUTS, 0);

        if (!CHIP_IS_E1x(sc)) {
                int factor = 0;

                ecore_init_block(sc, BLOCK_PGLUE_B, PHASE_COMMON);
                ecore_init_block(sc, BLOCK_ATC, PHASE_COMMON);

/* let the HW do it's magic... */
                do {
                        DELAY(200000);
                        val = REG_RD(sc, ATC_REG_ATC_INIT_DONE);
                } while (factor-- && (val != 1));

                if (val != 1) {
                        PMD_DRV_LOG(NOTICE, "ATC_INIT failed");
                        return -1;
                }
        }

        ecore_init_block(sc, BLOCK_DMAE, PHASE_COMMON);

        /* clean the DMAE memory */
        sc->dmae_ready = 1;
        ecore_init_fill(sc, TSEM_REG_PRAM, 0, 8);

        ecore_init_block(sc, BLOCK_TCM, PHASE_COMMON);

        ecore_init_block(sc, BLOCK_UCM, PHASE_COMMON);

        ecore_init_block(sc, BLOCK_CCM, PHASE_COMMON);

        ecore_init_block(sc, BLOCK_XCM, PHASE_COMMON);

        bnx2x_read_dmae(sc, XSEM_REG_PASSIVE_BUFFER, 3);
        bnx2x_read_dmae(sc, CSEM_REG_PASSIVE_BUFFER, 3);
        bnx2x_read_dmae(sc, TSEM_REG_PASSIVE_BUFFER, 3);
        bnx2x_read_dmae(sc, USEM_REG_PASSIVE_BUFFER, 3);

        ecore_init_block(sc, BLOCK_QM, PHASE_COMMON);

        /* QM queues pointers table */
        ecore_qm_init_ptr_table(sc, sc->qm_cid_count, INITOP_SET);

        /* soft reset pulse */
        REG_WR(sc, QM_REG_SOFT_RESET, 1);
        REG_WR(sc, QM_REG_SOFT_RESET, 0);

        if (CNIC_SUPPORT(sc))
                ecore_init_block(sc, BLOCK_TM, PHASE_COMMON);

        ecore_init_block(sc, BLOCK_DORQ, PHASE_COMMON);
        REG_WR(sc, DORQ_REG_DPM_CID_OFST, BNX2X_DB_SHIFT);

        if (!CHIP_REV_IS_SLOW(sc)) {
/* enable hw interrupt from doorbell Q */
                REG_WR(sc, DORQ_REG_DORQ_INT_MASK, 0);
        }

        ecore_init_block(sc, BLOCK_BRB1, PHASE_COMMON);

        ecore_init_block(sc, BLOCK_PRS, PHASE_COMMON);
        REG_WR(sc, PRS_REG_A_PRSU_20, 0xf);
        REG_WR(sc, PRS_REG_E1HOV_MODE, sc->devinfo.mf_info.path_has_ovlan);

        if (!CHIP_IS_E1x(sc) && !CHIP_IS_E3B0(sc)) {
                if (IS_MF_AFEX(sc)) {
                        /*
                         * configure that AFEX and VLAN headers must be
                         * received in AFEX mode
                         */
                        REG_WR(sc, PRS_REG_HDRS_AFTER_BASIC, 0xE);
                        REG_WR(sc, PRS_REG_MUST_HAVE_HDRS, 0xA);
                        REG_WR(sc, PRS_REG_HDRS_AFTER_TAG_0, 0x6);
                        REG_WR(sc, PRS_REG_TAG_ETHERTYPE_0, 0x8926);
                        REG_WR(sc, PRS_REG_TAG_LEN_0, 0x4);
                } else {
                        /*
                         * Bit-map indicating which L2 hdrs may appear
                         * after the basic Ethernet header
                         */
                        REG_WR(sc, PRS_REG_HDRS_AFTER_BASIC,
                               sc->devinfo.mf_info.path_has_ovlan ? 7 : 6);
                }
        }

        ecore_init_block(sc, BLOCK_TSDM, PHASE_COMMON);
        ecore_init_block(sc, BLOCK_CSDM, PHASE_COMMON);
        ecore_init_block(sc, BLOCK_USDM, PHASE_COMMON);
        ecore_init_block(sc, BLOCK_XSDM, PHASE_COMMON);

        if (!CHIP_IS_E1x(sc)) {
/* reset VFC memories */
                REG_WR(sc, TSEM_REG_FAST_MEMORY + VFC_REG_MEMORIES_RST,
                       VFC_MEMORIES_RST_REG_CAM_RST |
                       VFC_MEMORIES_RST_REG_RAM_RST);
                REG_WR(sc, XSEM_REG_FAST_MEMORY + VFC_REG_MEMORIES_RST,
                       VFC_MEMORIES_RST_REG_CAM_RST |
                       VFC_MEMORIES_RST_REG_RAM_RST);

                DELAY(20000);
        }

        ecore_init_block(sc, BLOCK_TSEM, PHASE_COMMON);
        ecore_init_block(sc, BLOCK_USEM, PHASE_COMMON);
        ecore_init_block(sc, BLOCK_CSEM, PHASE_COMMON);
        ecore_init_block(sc, BLOCK_XSEM, PHASE_COMMON);

        /* sync semi rtc */
        REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR, 0x80000000);
        REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0x80000000);

        ecore_init_block(sc, BLOCK_UPB, PHASE_COMMON);
        ecore_init_block(sc, BLOCK_XPB, PHASE_COMMON);
        ecore_init_block(sc, BLOCK_PBF, PHASE_COMMON);

        if (!CHIP_IS_E1x(sc)) {
                if (IS_MF_AFEX(sc)) {
                        /*
                         * configure that AFEX and VLAN headers must be
                         * sent in AFEX mode
                         */
                        REG_WR(sc, PBF_REG_HDRS_AFTER_BASIC, 0xE);
                        REG_WR(sc, PBF_REG_MUST_HAVE_HDRS, 0xA);
                        REG_WR(sc, PBF_REG_HDRS_AFTER_TAG_0, 0x6);
                        REG_WR(sc, PBF_REG_TAG_ETHERTYPE_0, 0x8926);
                        REG_WR(sc, PBF_REG_TAG_LEN_0, 0x4);
                } else {
                        REG_WR(sc, PBF_REG_HDRS_AFTER_BASIC,
                               sc->devinfo.mf_info.path_has_ovlan ? 7 : 6);
                }
        }

        REG_WR(sc, SRC_REG_SOFT_RST, 1);

        ecore_init_block(sc, BLOCK_SRC, PHASE_COMMON);

        if (CNIC_SUPPORT(sc)) {
                REG_WR(sc, SRC_REG_KEYSEARCH_0, 0x63285672);
                REG_WR(sc, SRC_REG_KEYSEARCH_1, 0x24b8f2cc);
                REG_WR(sc, SRC_REG_KEYSEARCH_2, 0x223aef9b);
                REG_WR(sc, SRC_REG_KEYSEARCH_3, 0x26001e3a);
                REG_WR(sc, SRC_REG_KEYSEARCH_4, 0x7ae91116);
                REG_WR(sc, SRC_REG_KEYSEARCH_5, 0x5ce5230b);
                REG_WR(sc, SRC_REG_KEYSEARCH_6, 0x298d8adf);
                REG_WR(sc, SRC_REG_KEYSEARCH_7, 0x6eb0ff09);
                REG_WR(sc, SRC_REG_KEYSEARCH_8, 0x1830f82f);
                REG_WR(sc, SRC_REG_KEYSEARCH_9, 0x01e46be7);
        }
        REG_WR(sc, SRC_REG_SOFT_RST, 0);

        if (sizeof(union cdu_context) != 1024) {
/* we currently assume that a context is 1024 bytes */
                PMD_DRV_LOG(NOTICE,
                            "please adjust the size of cdu_context(%ld)",
                            (long)sizeof(union cdu_context));
        }

        ecore_init_block(sc, BLOCK_CDU, PHASE_COMMON);
        val = (4 << 24) + (0 << 12) + 1024;
        REG_WR(sc, CDU_REG_CDU_GLOBAL_PARAMS, val);

        ecore_init_block(sc, BLOCK_CFC, PHASE_COMMON);

        REG_WR(sc, CFC_REG_INIT_REG, 0x7FF);
        /* enable context validation interrupt from CFC */
        REG_WR(sc, CFC_REG_CFC_INT_MASK, 0);

        /* set the thresholds to prevent CFC/CDU race */
        REG_WR(sc, CFC_REG_DEBUG0, 0x20020000);
        ecore_init_block(sc, BLOCK_HC, PHASE_COMMON);

        if (!CHIP_IS_E1x(sc) && BNX2X_NOMCP(sc)) {
                REG_WR(sc, IGU_REG_RESET_MEMORIES, 0x36);
        }

        ecore_init_block(sc, BLOCK_IGU, PHASE_COMMON);
        ecore_init_block(sc, BLOCK_MISC_AEU, PHASE_COMMON);

        /* Reset PCIE errors for debug */
        REG_WR(sc, 0x2814, 0xffffffff);
        REG_WR(sc, 0x3820, 0xffffffff);

        if (!CHIP_IS_E1x(sc)) {
                REG_WR(sc, PCICFG_OFFSET + PXPCS_TL_CONTROL_5,
                       (PXPCS_TL_CONTROL_5_ERR_UNSPPORT1 |
                        PXPCS_TL_CONTROL_5_ERR_UNSPPORT));
                REG_WR(sc, PCICFG_OFFSET + PXPCS_TL_FUNC345_STAT,
                       (PXPCS_TL_FUNC345_STAT_ERR_UNSPPORT4 |
                        PXPCS_TL_FUNC345_STAT_ERR_UNSPPORT3 |
                        PXPCS_TL_FUNC345_STAT_ERR_UNSPPORT2));
                REG_WR(sc, PCICFG_OFFSET + PXPCS_TL_FUNC678_STAT,
                       (PXPCS_TL_FUNC678_STAT_ERR_UNSPPORT7 |
                        PXPCS_TL_FUNC678_STAT_ERR_UNSPPORT6 |
                        PXPCS_TL_FUNC678_STAT_ERR_UNSPPORT5));
        }

        ecore_init_block(sc, BLOCK_NIG, PHASE_COMMON);

        /* in E3 this done in per-port section */
        if (!CHIP_IS_E3(sc))
                REG_WR(sc, NIG_REG_LLH_MF_MODE, IS_MF(sc));

        if (CHIP_IS_E1H(sc)) {
/* not applicable for E2 (and above ...) */
                REG_WR(sc, NIG_REG_LLH_E1HOV_MODE, IS_MF_SD(sc));
        }

        if (CHIP_REV_IS_SLOW(sc)) {
                DELAY(200000);
        }

        /* finish CFC init */
        val = reg_poll(sc, CFC_REG_LL_INIT_DONE, 1, 100, 10);
        if (val != 1) {
                PMD_DRV_LOG(NOTICE, "CFC LL_INIT failed");
                return -1;
        }
        val = reg_poll(sc, CFC_REG_AC_INIT_DONE, 1, 100, 10);
        if (val != 1) {
                PMD_DRV_LOG(NOTICE, "CFC AC_INIT failed");
                return -1;
        }
        val = reg_poll(sc, CFC_REG_CAM_INIT_DONE, 1, 100, 10);
        if (val != 1) {
                PMD_DRV_LOG(NOTICE, "CFC CAM_INIT failed");
                return -1;
        }
        REG_WR(sc, CFC_REG_DEBUG0, 0);

        bnx2x_setup_fan_failure_detection(sc);

        /* clear PXP2 attentions */
        REG_RD(sc, PXP2_REG_PXP2_INT_STS_CLR_0);

        bnx2x_enable_blocks_attention(sc);

        if (!CHIP_REV_IS_SLOW(sc)) {
                ecore_enable_blocks_parity(sc);
        }

        if (!BNX2X_NOMCP(sc)) {
                if (CHIP_IS_E1x(sc)) {
                        bnx2x_common_init_phy(sc);
                }
        }

        return 0;
}

/**
 * bnx2x_init_hw_common_chip - init HW at the COMMON_CHIP phase.
 *
 * @sc:     driver handle
 */
static int bnx2x_init_hw_common_chip(struct bnx2x_softc *sc)
{
        int rc = bnx2x_init_hw_common(sc);

        if (rc) {
                return rc;
        }

        /* In E2 2-PORT mode, same ext phy is used for the two paths */
        if (!BNX2X_NOMCP(sc)) {
                bnx2x_common_init_phy(sc);
        }

        return 0;
}

static int bnx2x_init_hw_port(struct bnx2x_softc *sc)
{
        int port = SC_PORT(sc);
        int init_phase = port ? PHASE_PORT1 : PHASE_PORT0;
        uint32_t low, high;
        uint32_t val;

        PMD_DRV_LOG(DEBUG, "starting port init for port %d", port);

        REG_WR(sc, NIG_REG_MASK_INTERRUPT_PORT0 + port * 4, 0);

        ecore_init_block(sc, BLOCK_MISC, init_phase);
        ecore_init_block(sc, BLOCK_PXP, init_phase);
        ecore_init_block(sc, BLOCK_PXP2, init_phase);

        /*
         * Timers bug workaround: disables the pf_master bit in pglue at
         * common phase, we need to enable it here before any dmae access are
         * attempted. Therefore we manually added the enable-master to the
         * port phase (it also happens in the function phase)
         */
        if (!CHIP_IS_E1x(sc)) {
                REG_WR(sc, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 1);
        }

        ecore_init_block(sc, BLOCK_ATC, init_phase);
        ecore_init_block(sc, BLOCK_DMAE, init_phase);
        ecore_init_block(sc, BLOCK_PGLUE_B, init_phase);
        ecore_init_block(sc, BLOCK_QM, init_phase);

        ecore_init_block(sc, BLOCK_TCM, init_phase);
        ecore_init_block(sc, BLOCK_UCM, init_phase);
        ecore_init_block(sc, BLOCK_CCM, init_phase);
        ecore_init_block(sc, BLOCK_XCM, init_phase);

        /* QM cid (connection) count */
        ecore_qm_init_cid_count(sc, sc->qm_cid_count, INITOP_SET);

        if (CNIC_SUPPORT(sc)) {
                ecore_init_block(sc, BLOCK_TM, init_phase);
                REG_WR(sc, TM_REG_LIN0_SCAN_TIME + port * 4, 20);
                REG_WR(sc, TM_REG_LIN0_MAX_ACTIVE_CID + port * 4, 31);
        }

        ecore_init_block(sc, BLOCK_DORQ, init_phase);

        ecore_init_block(sc, BLOCK_BRB1, init_phase);

        if (CHIP_IS_E1H(sc)) {
                if (IS_MF(sc)) {
                        low = (BNX2X_ONE_PORT(sc) ? 160 : 246);
                } else if (sc->mtu > 4096) {
                        if (BNX2X_ONE_PORT(sc)) {
                                low = 160;
                        } else {
                                val = sc->mtu;
                                /* (24*1024 + val*4)/256 */
                                low = (96 + (val / 64) + ((val % 64) ? 1 : 0));
                        }
                } else {
                        low = (BNX2X_ONE_PORT(sc) ? 80 : 160);
                }
                high = (low + 56);      /* 14*1024/256 */
                REG_WR(sc, BRB1_REG_PAUSE_LOW_THRESHOLD_0 + port * 4, low);
                REG_WR(sc, BRB1_REG_PAUSE_HIGH_THRESHOLD_0 + port * 4, high);
        }

        if (CHIP_IS_MODE_4_PORT(sc)) {
                REG_WR(sc, SC_PORT(sc) ?
                       BRB1_REG_MAC_GUARANTIED_1 :
                       BRB1_REG_MAC_GUARANTIED_0, 40);
        }

        ecore_init_block(sc, BLOCK_PRS, init_phase);
        if (CHIP_IS_E3B0(sc)) {
                if (IS_MF_AFEX(sc)) {
                        /* configure headers for AFEX mode */
                        if (SC_PORT(sc)) {
                                REG_WR(sc, PRS_REG_HDRS_AFTER_BASIC_PORT_1,
                                       0xE);
                                REG_WR(sc, PRS_REG_HDRS_AFTER_TAG_0_PORT_1,
                                       0x6);
                                REG_WR(sc, PRS_REG_MUST_HAVE_HDRS_PORT_1, 0xA);
                        } else {
                                REG_WR(sc, PRS_REG_HDRS_AFTER_BASIC_PORT_0,
                                       0xE);
                                REG_WR(sc, PRS_REG_HDRS_AFTER_TAG_0_PORT_0,
                                       0x6);
                                REG_WR(sc, PRS_REG_MUST_HAVE_HDRS_PORT_0, 0xA);
                        }
                } else {
                        /* Ovlan exists only if we are in multi-function +
                         * switch-dependent mode, in switch-independent there
                         * is no ovlan headers
                         */
                        REG_WR(sc, SC_PORT(sc) ?
                               PRS_REG_HDRS_AFTER_BASIC_PORT_1 :
                               PRS_REG_HDRS_AFTER_BASIC_PORT_0,
                               (sc->devinfo.mf_info.path_has_ovlan ? 7 : 6));
                }
        }

        ecore_init_block(sc, BLOCK_TSDM, init_phase);
        ecore_init_block(sc, BLOCK_CSDM, init_phase);
        ecore_init_block(sc, BLOCK_USDM, init_phase);
        ecore_init_block(sc, BLOCK_XSDM, init_phase);

        ecore_init_block(sc, BLOCK_TSEM, init_phase);
        ecore_init_block(sc, BLOCK_USEM, init_phase);
        ecore_init_block(sc, BLOCK_CSEM, init_phase);
        ecore_init_block(sc, BLOCK_XSEM, init_phase);

        ecore_init_block(sc, BLOCK_UPB, init_phase);
        ecore_init_block(sc, BLOCK_XPB, init_phase);

        ecore_init_block(sc, BLOCK_PBF, init_phase);

        if (CHIP_IS_E1x(sc)) {
/* configure PBF to work without PAUSE mtu 9000 */
                REG_WR(sc, PBF_REG_P0_PAUSE_ENABLE + port * 4, 0);

/* update threshold */
                REG_WR(sc, PBF_REG_P0_ARB_THRSH + port * 4, (9040 / 16));
/* update init credit */
                REG_WR(sc, PBF_REG_P0_INIT_CRD + port * 4,
                       (9040 / 16) + 553 - 22);

/* probe changes */
                REG_WR(sc, PBF_REG_INIT_P0 + port * 4, 1);
                DELAY(50);
                REG_WR(sc, PBF_REG_INIT_P0 + port * 4, 0);
        }

        if (CNIC_SUPPORT(sc)) {
                ecore_init_block(sc, BLOCK_SRC, init_phase);
        }

        ecore_init_block(sc, BLOCK_CDU, init_phase);
        ecore_init_block(sc, BLOCK_CFC, init_phase);
        ecore_init_block(sc, BLOCK_HC, init_phase);
        ecore_init_block(sc, BLOCK_IGU, init_phase);
        ecore_init_block(sc, BLOCK_MISC_AEU, init_phase);
        /* init aeu_mask_attn_func_0/1:
         *  - SF mode: bits 3-7 are masked. only bits 0-2 are in use
         *  - MF mode: bit 3 is masked. bits 0-2 are in use as in SF
         *             bits 4-7 are used for "per vn group attention" */
        val = IS_MF(sc) ? 0xF7 : 0x7;
        val |= 0x10;
        REG_WR(sc, MISC_REG_AEU_MASK_ATTN_FUNC_0 + port * 4, val);

        ecore_init_block(sc, BLOCK_NIG, init_phase);

        if (!CHIP_IS_E1x(sc)) {
/* Bit-map indicating which L2 hdrs may appear after the
 * basic Ethernet header
 */
                if (IS_MF_AFEX(sc)) {
                        REG_WR(sc, SC_PORT(sc) ?
                               NIG_REG_P1_HDRS_AFTER_BASIC :
                               NIG_REG_P0_HDRS_AFTER_BASIC, 0xE);
                } else {
                        REG_WR(sc, SC_PORT(sc) ?
                               NIG_REG_P1_HDRS_AFTER_BASIC :
                               NIG_REG_P0_HDRS_AFTER_BASIC,
                               IS_MF_SD(sc) ? 7 : 6);
                }

                if (CHIP_IS_E3(sc)) {
                        REG_WR(sc, SC_PORT(sc) ?
                               NIG_REG_LLH1_MF_MODE :
                               NIG_REG_LLH_MF_MODE, IS_MF(sc));
                }
        }
        if (!CHIP_IS_E3(sc)) {
                REG_WR(sc, NIG_REG_XGXS_SERDES0_MODE_SEL + port * 4, 1);
        }

        /* 0x2 disable mf_ov, 0x1 enable */
        REG_WR(sc, NIG_REG_LLH0_BRB1_DRV_MASK_MF + port * 4,
               (IS_MF_SD(sc) ? 0x1 : 0x2));

        if (!CHIP_IS_E1x(sc)) {
                val = 0;
                switch (sc->devinfo.mf_info.mf_mode) {
                case MULTI_FUNCTION_SD:
                        val = 1;
                        break;
                case MULTI_FUNCTION_SI:
                case MULTI_FUNCTION_AFEX:
                        val = 2;
                        break;
                }

                REG_WR(sc, (SC_PORT(sc) ? NIG_REG_LLH1_CLS_TYPE :
                            NIG_REG_LLH0_CLS_TYPE), val);
        }
        REG_WR(sc, NIG_REG_LLFC_ENABLE_0 + port * 4, 0);
        REG_WR(sc, NIG_REG_LLFC_OUT_EN_0 + port * 4, 0);
        REG_WR(sc, NIG_REG_PAUSE_ENABLE_0 + port * 4, 1);

        /* If SPIO5 is set to generate interrupts, enable it for this port */
        val = REG_RD(sc, MISC_REG_SPIO_EVENT_EN);
        if (val & MISC_SPIO_SPIO5) {
                uint32_t reg_addr = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 :
                                     MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0);
                val = REG_RD(sc, reg_addr);
                val |= AEU_INPUTS_ATTN_BITS_SPIO5;
                REG_WR(sc, reg_addr, val);
        }

        return 0;
}

static uint32_t
bnx2x_flr_clnup_reg_poll(struct bnx2x_softc *sc, uint32_t reg,
                       uint32_t expected, uint32_t poll_count)
{
        uint32_t cur_cnt = poll_count;
        uint32_t val;

        while ((val = REG_RD(sc, reg)) != expected && cur_cnt--) {
                DELAY(FLR_WAIT_INTERVAL);
        }

        return val;
}

static int
bnx2x_flr_clnup_poll_hw_counter(struct bnx2x_softc *sc, uint32_t reg,
                              __rte_unused const char *msg, uint32_t poll_cnt)
{
        uint32_t val = bnx2x_flr_clnup_reg_poll(sc, reg, 0, poll_cnt);

        if (val != 0) {
                PMD_DRV_LOG(NOTICE, "%s usage count=%d", msg, val);
                return -1;
        }

        return 0;
}

/* Common routines with VF FLR cleanup */
static uint32_t bnx2x_flr_clnup_poll_count(struct bnx2x_softc *sc)
{
        /* adjust polling timeout */
        if (CHIP_REV_IS_EMUL(sc)) {
                return FLR_POLL_CNT * 2000;
        }

        if (CHIP_REV_IS_FPGA(sc)) {
                return FLR_POLL_CNT * 120;
        }

        return FLR_POLL_CNT;
}

static int bnx2x_poll_hw_usage_counters(struct bnx2x_softc *sc, uint32_t poll_cnt)
{
        /* wait for CFC PF usage-counter to zero (includes all the VFs) */
        if (bnx2x_flr_clnup_poll_hw_counter(sc,
                                          CFC_REG_NUM_LCIDS_INSIDE_PF,
                                          "CFC PF usage counter timed out",
                                          poll_cnt)) {
                return -1;
        }

        /* Wait for DQ PF usage-counter to zero (until DQ cleanup) */
        if (bnx2x_flr_clnup_poll_hw_counter(sc,
                                          DORQ_REG_PF_USAGE_CNT,
                                          "DQ PF usage counter timed out",
                                          poll_cnt)) {
                return -1;
        }

        /* Wait for QM PF usage-counter to zero (until DQ cleanup) */
        if (bnx2x_flr_clnup_poll_hw_counter(sc,
                                          QM_REG_PF_USG_CNT_0 + 4 * SC_FUNC(sc),
                                          "QM PF usage counter timed out",
                                          poll_cnt)) {
                return -1;
        }

        /* Wait for Timer PF usage-counters to zero (until DQ cleanup) */
        if (bnx2x_flr_clnup_poll_hw_counter(sc,
                                          TM_REG_LIN0_VNIC_UC + 4 * SC_PORT(sc),
                                          "Timers VNIC usage counter timed out",
                                          poll_cnt)) {
                return -1;
        }

        if (bnx2x_flr_clnup_poll_hw_counter(sc,
                                          TM_REG_LIN0_NUM_SCANS +
                                          4 * SC_PORT(sc),
                                          "Timers NUM_SCANS usage counter timed out",
                                          poll_cnt)) {
                return -1;
        }

        /* Wait DMAE PF usage counter to zero */
        if (bnx2x_flr_clnup_poll_hw_counter(sc,
                                          dmae_reg_go_c[INIT_DMAE_C(sc)],
                                          "DMAE dommand register timed out",
                                          poll_cnt)) {
                return -1;
        }

        return 0;
}

#define OP_GEN_PARAM(param)                                            \
        (((param) << SDM_OP_GEN_COMP_PARAM_SHIFT) & SDM_OP_GEN_COMP_PARAM)
#define OP_GEN_TYPE(type)                                           \
        (((type) << SDM_OP_GEN_COMP_TYPE_SHIFT) & SDM_OP_GEN_COMP_TYPE)
#define OP_GEN_AGG_VECT(index)                                             \
        (((index) << SDM_OP_GEN_AGG_VECT_IDX_SHIFT) & SDM_OP_GEN_AGG_VECT_IDX)

static int
bnx2x_send_final_clnup(struct bnx2x_softc *sc, uint8_t clnup_func,
                     uint32_t poll_cnt)
{
        uint32_t op_gen_command = 0;
        uint32_t comp_addr = (BAR_CSTRORM_INTMEM +
                              CSTORM_FINAL_CLEANUP_COMPLETE_OFFSET(clnup_func));
        int ret = 0;

        if (REG_RD(sc, comp_addr)) {
                PMD_DRV_LOG(NOTICE,
                            "Cleanup complete was not 0 before sending");
                return -1;
        }

        op_gen_command |= OP_GEN_PARAM(XSTORM_AGG_INT_FINAL_CLEANUP_INDEX);
        op_gen_command |= OP_GEN_TYPE(XSTORM_AGG_INT_FINAL_CLEANUP_COMP_TYPE);
        op_gen_command |= OP_GEN_AGG_VECT(clnup_func);
        op_gen_command |= 1 << SDM_OP_GEN_AGG_VECT_IDX_VALID_SHIFT;

        REG_WR(sc, XSDM_REG_OPERATION_GEN, op_gen_command);

        if (bnx2x_flr_clnup_reg_poll(sc, comp_addr, 1, poll_cnt) != 1) {
                PMD_DRV_LOG(NOTICE, "FW final cleanup did not succeed");
                PMD_DRV_LOG(DEBUG, "At timeout completion address contained %x",
                            (REG_RD(sc, comp_addr)));
                rte_panic("FLR cleanup failed");
                return -1;
        }

        /* Zero completion for nxt FLR */
        REG_WR(sc, comp_addr, 0);

        return ret;
}

static void
bnx2x_pbf_pN_buf_flushed(struct bnx2x_softc *sc, struct pbf_pN_buf_regs *regs,
                       uint32_t poll_count)
{
        uint32_t init_crd, crd, crd_start, crd_freed, crd_freed_start;
        uint32_t cur_cnt = poll_count;

        crd_freed = crd_freed_start = REG_RD(sc, regs->crd_freed);
        crd = crd_start = REG_RD(sc, regs->crd);
        init_crd = REG_RD(sc, regs->init_crd);

        while ((crd != init_crd) &&
               ((uint32_t) ((int32_t) crd_freed - (int32_t) crd_freed_start) <
                (init_crd - crd_start))) {
                if (cur_cnt--) {
                        DELAY(FLR_WAIT_INTERVAL);
                        crd = REG_RD(sc, regs->crd);
                        crd_freed = REG_RD(sc, regs->crd_freed);
                } else {
                        break;
                }
        }
}

static void
bnx2x_pbf_pN_cmd_flushed(struct bnx2x_softc *sc, struct pbf_pN_cmd_regs *regs,
                       uint32_t poll_count)
{
        uint32_t occup, to_free, freed, freed_start;
        uint32_t cur_cnt = poll_count;

        occup = to_free = REG_RD(sc, regs->lines_occup);
        freed = freed_start = REG_RD(sc, regs->lines_freed);

        while (occup &&
               ((uint32_t) ((int32_t) freed - (int32_t) freed_start) <
                to_free)) {
                if (cur_cnt--) {
                        DELAY(FLR_WAIT_INTERVAL);
                        occup = REG_RD(sc, regs->lines_occup);
                        freed = REG_RD(sc, regs->lines_freed);
                } else {
                        break;
                }
        }
}

static void bnx2x_tx_hw_flushed(struct bnx2x_softc *sc, uint32_t poll_count)
{
        struct pbf_pN_cmd_regs cmd_regs[] = {
                {0, (CHIP_IS_E3B0(sc)) ?
                 PBF_REG_TQ_OCCUPANCY_Q0 : PBF_REG_P0_TQ_OCCUPANCY,
                 (CHIP_IS_E3B0(sc)) ?
                 PBF_REG_TQ_LINES_FREED_CNT_Q0 : PBF_REG_P0_TQ_LINES_FREED_CNT},
                {1, (CHIP_IS_E3B0(sc)) ?
                 PBF_REG_TQ_OCCUPANCY_Q1 : PBF_REG_P1_TQ_OCCUPANCY,
                 (CHIP_IS_E3B0(sc)) ?
                 PBF_REG_TQ_LINES_FREED_CNT_Q1 : PBF_REG_P1_TQ_LINES_FREED_CNT},
                {4, (CHIP_IS_E3B0(sc)) ?
                 PBF_REG_TQ_OCCUPANCY_LB_Q : PBF_REG_P4_TQ_OCCUPANCY,
                 (CHIP_IS_E3B0(sc)) ?
                 PBF_REG_TQ_LINES_FREED_CNT_LB_Q :
                 PBF_REG_P4_TQ_LINES_FREED_CNT}
        };

        struct pbf_pN_buf_regs buf_regs[] = {
                {0, (CHIP_IS_E3B0(sc)) ?
                 PBF_REG_INIT_CRD_Q0 : PBF_REG_P0_INIT_CRD,
                 (CHIP_IS_E3B0(sc)) ? PBF_REG_CREDIT_Q0 : PBF_REG_P0_CREDIT,
                 (CHIP_IS_E3B0(sc)) ?
                 PBF_REG_INTERNAL_CRD_FREED_CNT_Q0 :
                 PBF_REG_P0_INTERNAL_CRD_FREED_CNT},
                {1, (CHIP_IS_E3B0(sc)) ?
                 PBF_REG_INIT_CRD_Q1 : PBF_REG_P1_INIT_CRD,
                 (CHIP_IS_E3B0(sc)) ? PBF_REG_CREDIT_Q1 : PBF_REG_P1_CREDIT,
                 (CHIP_IS_E3B0(sc)) ?
                 PBF_REG_INTERNAL_CRD_FREED_CNT_Q1 :
                 PBF_REG_P1_INTERNAL_CRD_FREED_CNT},
                {4, (CHIP_IS_E3B0(sc)) ?
                 PBF_REG_INIT_CRD_LB_Q : PBF_REG_P4_INIT_CRD,
                 (CHIP_IS_E3B0(sc)) ? PBF_REG_CREDIT_LB_Q : PBF_REG_P4_CREDIT,
                 (CHIP_IS_E3B0(sc)) ?
                 PBF_REG_INTERNAL_CRD_FREED_CNT_LB_Q :
                 PBF_REG_P4_INTERNAL_CRD_FREED_CNT},
        };

        uint32_t i;

        /* Verify the command queues are flushed P0, P1, P4 */
        for (i = 0; i < ARRAY_SIZE(cmd_regs); i++) {
                bnx2x_pbf_pN_cmd_flushed(sc, &cmd_regs[i], poll_count);
        }

        /* Verify the transmission buffers are flushed P0, P1, P4 */
        for (i = 0; i < ARRAY_SIZE(buf_regs); i++) {
                bnx2x_pbf_pN_buf_flushed(sc, &buf_regs[i], poll_count);
        }
}

static void bnx2x_hw_enable_status(struct bnx2x_softc *sc)
{
        __rte_unused uint32_t val;

        val = REG_RD(sc, CFC_REG_WEAK_ENABLE_PF);
        PMD_DRV_LOG(DEBUG, "CFC_REG_WEAK_ENABLE_PF is 0x%x", val);

        val = REG_RD(sc, PBF_REG_DISABLE_PF);
        PMD_DRV_LOG(DEBUG, "PBF_REG_DISABLE_PF is 0x%x", val);

        val = REG_RD(sc, IGU_REG_PCI_PF_MSI_EN);
        PMD_DRV_LOG(DEBUG, "IGU_REG_PCI_PF_MSI_EN is 0x%x", val);

        val = REG_RD(sc, IGU_REG_PCI_PF_MSIX_EN);
        PMD_DRV_LOG(DEBUG, "IGU_REG_PCI_PF_MSIX_EN is 0x%x", val);

        val = REG_RD(sc, IGU_REG_PCI_PF_MSIX_FUNC_MASK);
        PMD_DRV_LOG(DEBUG, "IGU_REG_PCI_PF_MSIX_FUNC_MASK is 0x%x", val);

        val = REG_RD(sc, PGLUE_B_REG_SHADOW_BME_PF_7_0_CLR);
        PMD_DRV_LOG(DEBUG, "PGLUE_B_REG_SHADOW_BME_PF_7_0_CLR is 0x%x", val);

        val = REG_RD(sc, PGLUE_B_REG_FLR_REQUEST_PF_7_0_CLR);
        PMD_DRV_LOG(DEBUG, "PGLUE_B_REG_FLR_REQUEST_PF_7_0_CLR is 0x%x", val);

        val = REG_RD(sc, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER);
        PMD_DRV_LOG(DEBUG, "PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER is 0x%x",
                    val);
}

/**
 *      bnx2x_pf_flr_clnup
 *      a. re-enable target read on the PF
 *      b. poll cfc per function usgae counter
 *      c. poll the qm perfunction usage counter
 *      d. poll the tm per function usage counter
 *      e. poll the tm per function scan-done indication
 *      f. clear the dmae channel associated wit hthe PF
 *      g. zero the igu 'trailing edge' and 'leading edge' regs (attentions)
 *      h. call the common flr cleanup code with -1 (pf indication)
 */
static int bnx2x_pf_flr_clnup(struct bnx2x_softc *sc)
{
        uint32_t poll_cnt = bnx2x_flr_clnup_poll_count(sc);

        /* Re-enable PF target read access */
        REG_WR(sc, PGLUE_B_REG_INTERNAL_PFID_ENABLE_TARGET_READ, 1);

        /* Poll HW usage counters */
        if (bnx2x_poll_hw_usage_counters(sc, poll_cnt)) {
                return -1;
        }

        /* Zero the igu 'trailing edge' and 'leading edge' */

        /* Send the FW cleanup command */
        if (bnx2x_send_final_clnup(sc, (uint8_t) SC_FUNC(sc), poll_cnt)) {
                return -1;
        }

        /* ATC cleanup */

        /* Verify TX hw is flushed */
        bnx2x_tx_hw_flushed(sc, poll_cnt);

        /* Wait 100ms (not adjusted according to platform) */
        DELAY(100000);

        /* Verify no pending pci transactions */
        if (bnx2x_is_pcie_pending(sc)) {
                PMD_DRV_LOG(NOTICE, "PCIE Transactions still pending");
        }

        /* Debug */
        bnx2x_hw_enable_status(sc);

        /*
         * Master enable - Due to WB DMAE writes performed before this
         * register is re-initialized as part of the regular function init
         */
        REG_WR(sc, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 1);

        return 0;
}

static int bnx2x_init_hw_func(struct bnx2x_softc *sc)
{
        int port = SC_PORT(sc);
        int func = SC_FUNC(sc);
        int init_phase = PHASE_PF0 + func;
        struct ecore_ilt *ilt = sc->ilt;
        uint16_t cdu_ilt_start;
        uint32_t addr, val;
        uint32_t main_mem_base, main_mem_size, main_mem_prty_clr;
        int main_mem_width, rc;
        uint32_t i;

        PMD_DRV_LOG(DEBUG, "starting func init for func %d", func);

        /* FLR cleanup */
        if (!CHIP_IS_E1x(sc)) {
                rc = bnx2x_pf_flr_clnup(sc);
                if (rc) {
                        PMD_DRV_LOG(NOTICE, "FLR cleanup failed!");
                        return rc;
                }
        }

        /* set MSI reconfigure capability */
        if (sc->devinfo.int_block == INT_BLOCK_HC) {
                addr = (port ? HC_REG_CONFIG_1 : HC_REG_CONFIG_0);
                val = REG_RD(sc, addr);
                val |= HC_CONFIG_0_REG_MSI_ATTN_EN_0;
                REG_WR(sc, addr, val);
        }

        ecore_init_block(sc, BLOCK_PXP, init_phase);
        ecore_init_block(sc, BLOCK_PXP2, init_phase);

        ilt = sc->ilt;
        cdu_ilt_start = ilt->clients[ILT_CLIENT_CDU].start;

        for (i = 0; i < L2_ILT_LINES(sc); i++) {
                ilt->lines[cdu_ilt_start + i].page = sc->context[i].vcxt;
                ilt->lines[cdu_ilt_start + i].page_mapping =
                    (rte_iova_t)sc->context[i].vcxt_dma.paddr;
                ilt->lines[cdu_ilt_start + i].size = sc->context[i].size;
        }
        ecore_ilt_init_op(sc, INITOP_SET);

        REG_WR(sc, PRS_REG_NIC_MODE, 1);

        if (!CHIP_IS_E1x(sc)) {
                uint32_t pf_conf = IGU_PF_CONF_FUNC_EN;

/* Turn on a single ISR mode in IGU if driver is going to use
 * INT#x or MSI
 */
                if ((sc->interrupt_mode != INTR_MODE_MSIX)
                    || (sc->interrupt_mode != INTR_MODE_SINGLE_MSIX)) {
                        pf_conf |= IGU_PF_CONF_SINGLE_ISR_EN;
                }

/*
 * Timers workaround bug: function init part.
 * Need to wait 20msec after initializing ILT,
 * needed to make sure there are no requests in
 * one of the PXP internal queues with "old" ILT addresses
 */
                DELAY(20000);

/*
 * Master enable - Due to WB DMAE writes performed before this
 * register is re-initialized as part of the regular function
 * init
 */
                REG_WR(sc, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 1);
/* Enable the function in IGU */
                REG_WR(sc, IGU_REG_PF_CONFIGURATION, pf_conf);
        }

        sc->dmae_ready = 1;

        ecore_init_block(sc, BLOCK_PGLUE_B, init_phase);

        if (!CHIP_IS_E1x(sc))
                REG_WR(sc, PGLUE_B_REG_WAS_ERROR_PF_7_0_CLR, func);

        ecore_init_block(sc, BLOCK_ATC, init_phase);
        ecore_init_block(sc, BLOCK_DMAE, init_phase);
        ecore_init_block(sc, BLOCK_NIG, init_phase);
        ecore_init_block(sc, BLOCK_SRC, init_phase);
        ecore_init_block(sc, BLOCK_MISC, init_phase);
        ecore_init_block(sc, BLOCK_TCM, init_phase);
        ecore_init_block(sc, BLOCK_UCM, init_phase);
        ecore_init_block(sc, BLOCK_CCM, init_phase);
        ecore_init_block(sc, BLOCK_XCM, init_phase);
        ecore_init_block(sc, BLOCK_TSEM, init_phase);
        ecore_init_block(sc, BLOCK_USEM, init_phase);
        ecore_init_block(sc, BLOCK_CSEM, init_phase);
        ecore_init_block(sc, BLOCK_XSEM, init_phase);

        if (!CHIP_IS_E1x(sc))
                REG_WR(sc, QM_REG_PF_EN, 1);

        if (!CHIP_IS_E1x(sc)) {
                REG_WR(sc, TSEM_REG_VFPF_ERR_NUM, BNX2X_MAX_NUM_OF_VFS + func);
                REG_WR(sc, USEM_REG_VFPF_ERR_NUM, BNX2X_MAX_NUM_OF_VFS + func);
                REG_WR(sc, CSEM_REG_VFPF_ERR_NUM, BNX2X_MAX_NUM_OF_VFS + func);
                REG_WR(sc, XSEM_REG_VFPF_ERR_NUM, BNX2X_MAX_NUM_OF_VFS + func);
        }
        ecore_init_block(sc, BLOCK_QM, init_phase);

        ecore_init_block(sc, BLOCK_TM, init_phase);
        ecore_init_block(sc, BLOCK_DORQ, init_phase);

        ecore_init_block(sc, BLOCK_BRB1, init_phase);
        ecore_init_block(sc, BLOCK_PRS, init_phase);
        ecore_init_block(sc, BLOCK_TSDM, init_phase);
        ecore_init_block(sc, BLOCK_CSDM, init_phase);
        ecore_init_block(sc, BLOCK_USDM, init_phase);
        ecore_init_block(sc, BLOCK_XSDM, init_phase);
        ecore_init_block(sc, BLOCK_UPB, init_phase);
        ecore_init_block(sc, BLOCK_XPB, init_phase);
        ecore_init_block(sc, BLOCK_PBF, init_phase);
        if (!CHIP_IS_E1x(sc))
                REG_WR(sc, PBF_REG_DISABLE_PF, 0);

        ecore_init_block(sc, BLOCK_CDU, init_phase);

        ecore_init_block(sc, BLOCK_CFC, init_phase);

        if (!CHIP_IS_E1x(sc))
                REG_WR(sc, CFC_REG_WEAK_ENABLE_PF, 1);

        if (IS_MF(sc)) {
                REG_WR(sc, NIG_REG_LLH0_FUNC_EN + port * 8, 1);
                REG_WR(sc, NIG_REG_LLH0_FUNC_VLAN_ID + port * 8, OVLAN(sc));
        }

        ecore_init_block(sc, BLOCK_MISC_AEU, init_phase);

        /* HC init per function */
        if (sc->devinfo.int_block == INT_BLOCK_HC) {
                if (CHIP_IS_E1H(sc)) {
                        REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_12 + func * 4, 0);

                        REG_WR(sc, HC_REG_LEADING_EDGE_0 + port * 8, 0);
                        REG_WR(sc, HC_REG_TRAILING_EDGE_0 + port * 8, 0);
                }
                ecore_init_block(sc, BLOCK_HC, init_phase);

        } else {
                uint32_t num_segs, sb_idx, prod_offset;

                REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_12 + func * 4, 0);

                if (!CHIP_IS_E1x(sc)) {
                        REG_WR(sc, IGU_REG_LEADING_EDGE_LATCH, 0);
                        REG_WR(sc, IGU_REG_TRAILING_EDGE_LATCH, 0);
                }

                ecore_init_block(sc, BLOCK_IGU, init_phase);

                if (!CHIP_IS_E1x(sc)) {
                        int dsb_idx = 0;
        /**
         * Producer memory:
         * E2 mode: address 0-135 match to the mapping memory;
         * 136 - PF0 default prod; 137 - PF1 default prod;
         * 138 - PF2 default prod; 139 - PF3 default prod;
         * 140 - PF0 attn prod;    141 - PF1 attn prod;
         * 142 - PF2 attn prod;    143 - PF3 attn prod;
         * 144-147 reserved.
         *
         * E1.5 mode - In backward compatible mode;
         * for non default SB; each even line in the memory
         * holds the U producer and each odd line hold
         * the C producer. The first 128 producers are for
         * NDSB (PF0 - 0-31; PF1 - 32-63 and so on). The last 20
         * producers are for the DSB for each PF.
         * Each PF has five segments: (the order inside each
         * segment is PF0; PF1; PF2; PF3) - 128-131 U prods;
         * 132-135 C prods; 136-139 X prods; 140-143 T prods;
         * 144-147 attn prods;
         */
                        /* non-default-status-blocks */
                        num_segs = CHIP_INT_MODE_IS_BC(sc) ?
                            IGU_BC_NDSB_NUM_SEGS : IGU_NORM_NDSB_NUM_SEGS;
                        for (sb_idx = 0; sb_idx < sc->igu_sb_cnt; sb_idx++) {
                                prod_offset = (sc->igu_base_sb + sb_idx) *
                                    num_segs;

                                for (i = 0; i < num_segs; i++) {
                                        addr = IGU_REG_PROD_CONS_MEMORY +
                                            (prod_offset + i) * 4;
                                        REG_WR(sc, addr, 0);
                                }
                                /* send consumer update with value 0 */
                                bnx2x_ack_sb(sc, sc->igu_base_sb + sb_idx,
                                           USTORM_ID, 0, IGU_INT_NOP, 1);
                                bnx2x_igu_clear_sb(sc, sc->igu_base_sb + sb_idx);
                        }

                        /* default-status-blocks */
                        num_segs = CHIP_INT_MODE_IS_BC(sc) ?
                            IGU_BC_DSB_NUM_SEGS : IGU_NORM_DSB_NUM_SEGS;

                        if (CHIP_IS_MODE_4_PORT(sc))
                                dsb_idx = SC_FUNC(sc);
                        else
                                dsb_idx = SC_VN(sc);

                        prod_offset = (CHIP_INT_MODE_IS_BC(sc) ?
                                       IGU_BC_BASE_DSB_PROD + dsb_idx :
                                       IGU_NORM_BASE_DSB_PROD + dsb_idx);

                        /*
                         * igu prods come in chunks of E1HVN_MAX (4) -
                         * does not matters what is the current chip mode
                         */
                        for (i = 0; i < (num_segs * E1HVN_MAX); i += E1HVN_MAX) {
                                addr = IGU_REG_PROD_CONS_MEMORY +
                                    (prod_offset + i) * 4;
                                REG_WR(sc, addr, 0);
                        }
                        /* send consumer update with 0 */
                        if (CHIP_INT_MODE_IS_BC(sc)) {
                                bnx2x_ack_sb(sc, sc->igu_dsb_id,
                                           USTORM_ID, 0, IGU_INT_NOP, 1);
                                bnx2x_ack_sb(sc, sc->igu_dsb_id,
                                           CSTORM_ID, 0, IGU_INT_NOP, 1);
                                bnx2x_ack_sb(sc, sc->igu_dsb_id,
                                           XSTORM_ID, 0, IGU_INT_NOP, 1);
                                bnx2x_ack_sb(sc, sc->igu_dsb_id,
                                           TSTORM_ID, 0, IGU_INT_NOP, 1);
                                bnx2x_ack_sb(sc, sc->igu_dsb_id,
                                           ATTENTION_ID, 0, IGU_INT_NOP, 1);
                        } else {
                                bnx2x_ack_sb(sc, sc->igu_dsb_id,
                                           USTORM_ID, 0, IGU_INT_NOP, 1);
                                bnx2x_ack_sb(sc, sc->igu_dsb_id,
                                           ATTENTION_ID, 0, IGU_INT_NOP, 1);
                        }
                        bnx2x_igu_clear_sb(sc, sc->igu_dsb_id);

                        /* !!! these should become driver const once
                           rf-tool supports split-68 const */
                        REG_WR(sc, IGU_REG_SB_INT_BEFORE_MASK_LSB, 0);
                        REG_WR(sc, IGU_REG_SB_INT_BEFORE_MASK_MSB, 0);
                        REG_WR(sc, IGU_REG_SB_MASK_LSB, 0);
                        REG_WR(sc, IGU_REG_SB_MASK_MSB, 0);
                        REG_WR(sc, IGU_REG_PBA_STATUS_LSB, 0);
                        REG_WR(sc, IGU_REG_PBA_STATUS_MSB, 0);
                }
        }

        /* Reset PCIE errors for debug */
        REG_WR(sc, 0x2114, 0xffffffff);
        REG_WR(sc, 0x2120, 0xffffffff);

        if (CHIP_IS_E1x(sc)) {
                main_mem_size = HC_REG_MAIN_MEMORY_SIZE / 2;    /*dwords */
                main_mem_base = HC_REG_MAIN_MEMORY +
                    SC_PORT(sc) * (main_mem_size * 4);
                main_mem_prty_clr = HC_REG_HC_PRTY_STS_CLR;
                main_mem_width = 8;

                val = REG_RD(sc, main_mem_prty_clr);
                if (val) {
                        PMD_DRV_LOG(DEBUG,
                                    "Parity errors in HC block during function init (0x%x)!",
                                    val);
                }

/* Clear "false" parity errors in MSI-X table */
                for (i = main_mem_base;
                     i < main_mem_base + main_mem_size * 4;
                     i += main_mem_width) {
                        bnx2x_read_dmae(sc, i, main_mem_width / 4);
                        bnx2x_write_dmae(sc, BNX2X_SP_MAPPING(sc, wb_data),
                                       i, main_mem_width / 4);
                }
/* Clear HC parity attention */
                REG_RD(sc, main_mem_prty_clr);
        }

        /* Enable STORMs SP logging */
        REG_WR8(sc, BAR_USTRORM_INTMEM +
                USTORM_RECORD_SLOW_PATH_OFFSET(SC_FUNC(sc)), 1);
        REG_WR8(sc, BAR_TSTRORM_INTMEM +
                TSTORM_RECORD_SLOW_PATH_OFFSET(SC_FUNC(sc)), 1);
        REG_WR8(sc, BAR_CSTRORM_INTMEM +
                CSTORM_RECORD_SLOW_PATH_OFFSET(SC_FUNC(sc)), 1);
        REG_WR8(sc, BAR_XSTRORM_INTMEM +
                XSTORM_RECORD_SLOW_PATH_OFFSET(SC_FUNC(sc)), 1);

        elink_phy_probe(&sc->link_params);

        return 0;
}

static void bnx2x_link_reset(struct bnx2x_softc *sc)
{
        if (!BNX2X_NOMCP(sc)) {
                elink_lfa_reset(&sc->link_params, &sc->link_vars);
        } else {
                if (!CHIP_REV_IS_SLOW(sc)) {
                        PMD_DRV_LOG(WARNING,
                                    "Bootcode is missing - cannot reset link");
                }
        }
}

static void bnx2x_reset_port(struct bnx2x_softc *sc)
{
        int port = SC_PORT(sc);
        uint32_t val;

        /* reset physical Link */
        bnx2x_link_reset(sc);

        REG_WR(sc, NIG_REG_MASK_INTERRUPT_PORT0 + port * 4, 0);

        /* Do not rcv packets to BRB */
        REG_WR(sc, NIG_REG_LLH0_BRB1_DRV_MASK + port * 4, 0x0);
        /* Do not direct rcv packets that are not for MCP to the BRB */
        REG_WR(sc, (port ? NIG_REG_LLH1_BRB1_NOT_MCP :
                    NIG_REG_LLH0_BRB1_NOT_MCP), 0x0);

        /* Configure AEU */
        REG_WR(sc, MISC_REG_AEU_MASK_ATTN_FUNC_0 + port * 4, 0);

        DELAY(100000);

        /* Check for BRB port occupancy */
        val = REG_RD(sc, BRB1_REG_PORT_NUM_OCC_BLOCKS_0 + port * 4);
        if (val) {
                PMD_DRV_LOG(DEBUG,
                            "BRB1 is not empty, %d blocks are occupied", val);
        }
}

static void bnx2x_ilt_wr(struct bnx2x_softc *sc, uint32_t index, rte_iova_t addr)
{
        int reg;
        uint32_t wb_write[2];

        reg = PXP2_REG_RQ_ONCHIP_AT_B0 + index * 8;

        wb_write[0] = ONCHIP_ADDR1(addr);
        wb_write[1] = ONCHIP_ADDR2(addr);
        REG_WR_DMAE(sc, reg, wb_write, 2);
}

static void bnx2x_clear_func_ilt(struct bnx2x_softc *sc, uint32_t func)
{
        uint32_t i, base = FUNC_ILT_BASE(func);
        for (i = base; i < base + ILT_PER_FUNC; i++) {
                bnx2x_ilt_wr(sc, i, 0);
        }
}

static void bnx2x_reset_func(struct bnx2x_softc *sc)
{
        struct bnx2x_fastpath *fp;
        int port = SC_PORT(sc);
        int func = SC_FUNC(sc);
        int i;

        /* Disable the function in the FW */
        REG_WR8(sc, BAR_XSTRORM_INTMEM + XSTORM_FUNC_EN_OFFSET(func), 0);
        REG_WR8(sc, BAR_CSTRORM_INTMEM + CSTORM_FUNC_EN_OFFSET(func), 0);
        REG_WR8(sc, BAR_TSTRORM_INTMEM + TSTORM_FUNC_EN_OFFSET(func), 0);
        REG_WR8(sc, BAR_USTRORM_INTMEM + USTORM_FUNC_EN_OFFSET(func), 0);

        /* FP SBs */
        FOR_EACH_ETH_QUEUE(sc, i) {
                fp = &sc->fp[i];
                REG_WR8(sc, BAR_CSTRORM_INTMEM +
                        CSTORM_STATUS_BLOCK_DATA_STATE_OFFSET(fp->fw_sb_id),
                        SB_DISABLED);
        }

        /* SP SB */
        REG_WR8(sc, BAR_CSTRORM_INTMEM +
                CSTORM_SP_STATUS_BLOCK_DATA_STATE_OFFSET(func), SB_DISABLED);

        for (i = 0; i < XSTORM_SPQ_DATA_SIZE / 4; i++) {
                REG_WR(sc, BAR_XSTRORM_INTMEM + XSTORM_SPQ_DATA_OFFSET(func),
                       0);
        }

        /* Configure IGU */
        if (sc->devinfo.int_block == INT_BLOCK_HC) {
                REG_WR(sc, HC_REG_LEADING_EDGE_0 + port * 8, 0);
                REG_WR(sc, HC_REG_TRAILING_EDGE_0 + port * 8, 0);
        } else {
                REG_WR(sc, IGU_REG_LEADING_EDGE_LATCH, 0);
                REG_WR(sc, IGU_REG_TRAILING_EDGE_LATCH, 0);
        }

        if (CNIC_LOADED(sc)) {
/* Disable Timer scan */
                REG_WR(sc, TM_REG_EN_LINEAR0_TIMER + port * 4, 0);
/*
 * Wait for at least 10ms and up to 2 second for the timers
 * scan to complete
 */
                for (i = 0; i < 200; i++) {
                        DELAY(10000);
                        if (!REG_RD(sc, TM_REG_LIN0_SCAN_ON + port * 4))
                                break;
                }
        }

        /* Clear ILT */
        bnx2x_clear_func_ilt(sc, func);

        /*
         * Timers workaround bug for E2: if this is vnic-3,
         * we need to set the entire ilt range for this timers.
         */
        if (!CHIP_IS_E1x(sc) && SC_VN(sc) == 3) {
                struct ilt_client_info ilt_cli;
/* use dummy TM client */
                memset(&ilt_cli, 0, sizeof(struct ilt_client_info));
                ilt_cli.start = 0;
                ilt_cli.end = ILT_NUM_PAGE_ENTRIES - 1;
                ilt_cli.client_num = ILT_CLIENT_TM;

                ecore_ilt_boundry_init_op(sc, &ilt_cli, 0);
        }

        /* this assumes that reset_port() called before reset_func() */
        if (!CHIP_IS_E1x(sc)) {
                bnx2x_pf_disable(sc);
        }

        sc->dmae_ready = 0;
}

static void bnx2x_release_firmware(struct bnx2x_softc *sc)
{
        rte_free(sc->init_ops);
        rte_free(sc->init_ops_offsets);
        rte_free(sc->init_data);
        rte_free(sc->iro_array);
}

static int bnx2x_init_firmware(struct bnx2x_softc *sc)
{
        uint32_t len, i;
        uint8_t *p = sc->firmware;
        uint32_t off[24];

        for (i = 0; i < 24; ++i)
                off[i] = rte_be_to_cpu_32(*((uint32_t *) sc->firmware + i));

        len = off[0];
        sc->init_ops = rte_zmalloc("", len, RTE_CACHE_LINE_SIZE);
        if (!sc->init_ops)
                goto alloc_failed;
        bnx2x_data_to_init_ops(p + off[1], sc->init_ops, len);

        len = off[2];
        sc->init_ops_offsets = rte_zmalloc("", len, RTE_CACHE_LINE_SIZE);
        if (!sc->init_ops_offsets)
                goto alloc_failed;
        bnx2x_data_to_init_offsets(p + off[3], sc->init_ops_offsets, len);

        len = off[4];
        sc->init_data = rte_zmalloc("", len, RTE_CACHE_LINE_SIZE);
        if (!sc->init_data)
                goto alloc_failed;
        bnx2x_data_to_init_data(p + off[5], sc->init_data, len);

        sc->tsem_int_table_data = p + off[7];
        sc->tsem_pram_data = p + off[9];
        sc->usem_int_table_data = p + off[11];
        sc->usem_pram_data = p + off[13];
        sc->csem_int_table_data = p + off[15];
        sc->csem_pram_data = p + off[17];
        sc->xsem_int_table_data = p + off[19];
        sc->xsem_pram_data = p + off[21];

        len = off[22];
        sc->iro_array = rte_zmalloc("", len, RTE_CACHE_LINE_SIZE);
        if (!sc->iro_array)
                goto alloc_failed;
        bnx2x_data_to_iro_array(p + off[23], sc->iro_array, len);

        return 0;

alloc_failed:
        bnx2x_release_firmware(sc);
        return -1;
}

static int cut_gzip_prefix(const uint8_t * zbuf, int len)
{
#define MIN_PREFIX_SIZE (10)

        int n = MIN_PREFIX_SIZE;
        uint16_t xlen;

        if (!(zbuf[0] == 0x1f && zbuf[1] == 0x8b && zbuf[2] == Z_DEFLATED) ||
            len <= MIN_PREFIX_SIZE) {
                return -1;
        }

        /* optional extra fields are present */
        if (zbuf[3] & 0x4) {
                xlen = zbuf[13];
                xlen <<= 8;
                xlen += zbuf[12];

                n += xlen;
        }
        /* file name is present */
        if (zbuf[3] & 0x8) {
                while ((zbuf[n++] != 0) && (n < len)) ;
        }

        return n;
}

static int ecore_gunzip(struct bnx2x_softc *sc, const uint8_t * zbuf, int len)
{
        int ret;
        int data_begin = cut_gzip_prefix(zbuf, len);

        PMD_DRV_LOG(DEBUG, "ecore_gunzip %d", len);

        if (data_begin <= 0) {
                PMD_DRV_LOG(NOTICE, "bad gzip prefix");
                return -1;
        }

        memset(&zlib_stream, 0, sizeof(zlib_stream));
        zlib_stream.next_in = zbuf + data_begin;
        zlib_stream.avail_in = len - data_begin;
        zlib_stream.next_out = sc->gz_buf;
        zlib_stream.avail_out = FW_BUF_SIZE;

        ret = inflateInit2(&zlib_stream, -MAX_WBITS);
        if (ret != Z_OK) {
                PMD_DRV_LOG(NOTICE, "zlib inflateInit2 error");
                return ret;
        }

        ret = inflate(&zlib_stream, Z_FINISH);
        if ((ret != Z_STREAM_END) && (ret != Z_OK)) {
                PMD_DRV_LOG(NOTICE, "zlib inflate error: %d %s", ret,
                            zlib_stream.msg);
        }

        sc->gz_outlen = zlib_stream.total_out;
        if (sc->gz_outlen & 0x3) {
                PMD_DRV_LOG(NOTICE, "firmware is not aligned. gz_outlen == %d",
                            sc->gz_outlen);
        }
        sc->gz_outlen >>= 2;

        inflateEnd(&zlib_stream);

        if (ret == Z_STREAM_END)
                return 0;

        return ret;
}

static void
ecore_write_dmae_phys_len(struct bnx2x_softc *sc, rte_iova_t phys_addr,
                          uint32_t addr, uint32_t len)
{
        bnx2x_write_dmae_phys_len(sc, phys_addr, addr, len);
}

void
ecore_storm_memset_struct(struct bnx2x_softc *sc, uint32_t addr, size_t size,
                          uint32_t * data)
{
        uint8_t i;
        for (i = 0; i < size / 4; i++) {
                REG_WR(sc, addr + (i * 4), data[i]);
        }
}

static const char *get_ext_phy_type(uint32_t ext_phy_type)
{
        uint32_t phy_type_idx = ext_phy_type >> 8;
        static const char *types[] =
            { "DIRECT", "BNX2X-8071", "BNX2X-8072", "BNX2X-8073",
                "BNX2X-8705", "BNX2X-8706", "BNX2X-8726", "BNX2X-8481", "SFX-7101",
                "BNX2X-8727",
                "BNX2X-8727-NOC", "BNX2X-84823", "NOT_CONN", "FAILURE"
        };

        if (phy_type_idx < 12)
                return types[phy_type_idx];
        else if (PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN == ext_phy_type)
                return types[12];
        else
                return types[13];
}

static const char *get_state(uint32_t state)
{
        uint32_t state_idx = state >> 12;
        static const char *states[] = { "CLOSED", "OPENING_WAIT4_LOAD",
                "OPENING_WAIT4_PORT", "OPEN", "CLOSING_WAIT4_HALT",
                "CLOSING_WAIT4_DELETE", "CLOSING_WAIT4_UNLOAD",
                "UNKNOWN", "UNKNOWN", "UNKNOWN", "UNKNOWN", "UNKNOWN",
                "UNKNOWN", "DISABLED", "DIAG", "ERROR", "UNDEFINED"
        };

        if (state_idx <= 0xF)
                return states[state_idx];
        else
                return states[0x10];
}

static const char *get_recovery_state(uint32_t state)
{
        static const char *states[] = { "NONE", "DONE", "INIT",
                "WAIT", "FAILED", "NIC_LOADING"
        };
        return states[state];
}

static const char *get_rx_mode(uint32_t mode)
{
        static const char *modes[] = { "NONE", "NORMAL", "ALLMULTI",
                "PROMISC", "MAX_MULTICAST", "ERROR"
        };

        if (mode < 0x4)
                return modes[mode];
        else if (BNX2X_MAX_MULTICAST == mode)
                return modes[4];
        else
                return modes[5];
}

#define BNX2X_INFO_STR_MAX 256
static const char *get_bnx2x_flags(uint32_t flags)
{
        int i;
        static const char *flag[] = { "ONE_PORT ", "NO_ISCSI ",
                "NO_FCOE ", "NO_WOL ", "USING_DAC ", "USING_MSIX ",
                "USING_MSI ", "DISABLE_MSI ", "UNKNOWN ", "NO_MCP ",
                "SAFC_TX_FLAG ", "MF_FUNC_DIS ", "TX_SWITCHING "
        };
        static char flag_str[BNX2X_INFO_STR_MAX];
        memset(flag_str, 0, BNX2X_INFO_STR_MAX);

        for (i = 0; i < 5; i++)
                if (flags & (1 << i)) {
                        strcat(flag_str, flag[i]);
                        flags ^= (1 << i);
                }
        if (flags) {
                static char unknown[BNX2X_INFO_STR_MAX];
                snprintf(unknown, 32, "Unknown flag mask %x", flags);
                strcat(flag_str, unknown);
        }
        return flag_str;
}

/*
 * Prints useful adapter info.
 */
void bnx2x_print_adapter_info(struct bnx2x_softc *sc)
{
        int i = 0;
        __rte_unused uint32_t ext_phy_type;

        PMD_INIT_FUNC_TRACE();
        if (sc->link_vars.phy_flags & PHY_XGXS_FLAG)
                ext_phy_type = ELINK_XGXS_EXT_PHY_TYPE(REG_RD(sc,
                                                              sc->
                                                              devinfo.shmem_base
                                                              + offsetof(struct
                                                                         shmem_region,
                                                                         dev_info.port_hw_config
                                                                         [0].external_phy_config)));
        else
                ext_phy_type = ELINK_SERDES_EXT_PHY_TYPE(REG_RD(sc,
                                                                sc->
                                                                devinfo.shmem_base
                                                                +
                                                                offsetof(struct
                                                                         shmem_region,
                                                                         dev_info.port_hw_config
                                                                         [0].external_phy_config)));

        PMD_INIT_LOG(DEBUG, "\n\n===================================\n");
        /* Hardware chip info. */
        PMD_INIT_LOG(DEBUG, "%12s : %#08x", "ASIC", sc->devinfo.chip_id);
        PMD_INIT_LOG(DEBUG, "%12s : %c%d", "Rev", (CHIP_REV(sc) >> 12) + 'A',
                     (CHIP_METAL(sc) >> 4));

        /* Bus info. */
        PMD_INIT_LOG(DEBUG, "%12s : %d, ", "Bus PCIe", sc->devinfo.pcie_link_width);
        switch (sc->devinfo.pcie_link_speed) {
        case 1:
                PMD_INIT_LOG(DEBUG, "%23s", "2.5 Gbps");
                break;
        case 2:
                PMD_INIT_LOG(DEBUG, "%21s", "5 Gbps");
                break;
        case 4:
                PMD_INIT_LOG(DEBUG, "%21s", "8 Gbps");
                break;
        default:
                PMD_INIT_LOG(DEBUG, "%33s", "Unknown link speed");
        }

        /* Device features. */
        PMD_INIT_LOG(DEBUG, "%12s : ", "Flags");

        /* Miscellaneous flags. */
        if (sc->devinfo.pcie_cap_flags & BNX2X_MSI_CAPABLE_FLAG) {
                PMD_INIT_LOG(DEBUG, "%18s", "MSI");
                i++;
        }

        if (sc->devinfo.pcie_cap_flags & BNX2X_MSIX_CAPABLE_FLAG) {
                if (i > 0)
                        PMD_INIT_LOG(DEBUG, "|");
                PMD_INIT_LOG(DEBUG, "%20s", "MSI-X");
                i++;
        }

        if (IS_PF(sc)) {
                PMD_INIT_LOG(DEBUG, "%12s : ", "Queues");
                switch (sc->sp->rss_rdata.rss_mode) {
                case ETH_RSS_MODE_DISABLED:
                        PMD_INIT_LOG(DEBUG, "%19s", "None");
                        break;
                case ETH_RSS_MODE_REGULAR:
                        PMD_INIT_LOG(DEBUG, "%18s : %d", "RSS", sc->num_queues);
                        break;
                default:
                        PMD_INIT_LOG(DEBUG, "%22s", "Unknown");
                        break;
                }
        }

        /* RTE and Driver versions */
        PMD_INIT_LOG(DEBUG, "%12s : %s", "DPDK",
                     rte_version());
        PMD_INIT_LOG(DEBUG, "%12s : %s", "Driver",
                     bnx2x_pmd_version());

        /* Firmware versions and device features. */
        PMD_INIT_LOG(DEBUG, "%12s : %d.%d.%d",
                     "Firmware",
                     BNX2X_5710_FW_MAJOR_VERSION,
                     BNX2X_5710_FW_MINOR_VERSION,
                     BNX2X_5710_FW_REVISION_VERSION);
        PMD_INIT_LOG(DEBUG, "%12s : %s",
                     "Bootcode", sc->devinfo.bc_ver_str);

        PMD_INIT_LOG(DEBUG, "\n\n===================================\n");
        PMD_INIT_LOG(DEBUG, "%12s : %u", "Bnx2x Func", sc->pcie_func);
        PMD_INIT_LOG(DEBUG, "%12s : %s", "Bnx2x Flags", get_bnx2x_flags(sc->flags));
        PMD_INIT_LOG(DEBUG, "%12s : %s", "DMAE Is",
                     (sc->dmae_ready ? "Ready" : "Not Ready"));
        PMD_INIT_LOG(DEBUG, "%12s : %s", "OVLAN", (OVLAN(sc) ? "YES" : "NO"));
        PMD_INIT_LOG(DEBUG, "%12s : %s", "MF", (IS_MF(sc) ? "YES" : "NO"));
        PMD_INIT_LOG(DEBUG, "%12s : %u", "MTU", sc->mtu);
        PMD_INIT_LOG(DEBUG, "%12s : %s", "PHY Type", get_ext_phy_type(ext_phy_type));
        PMD_INIT_LOG(DEBUG, "%12s : %x:%x:%x:%x:%x:%x", "MAC Addr",
                        sc->link_params.mac_addr[0],
                        sc->link_params.mac_addr[1],
                        sc->link_params.mac_addr[2],
                        sc->link_params.mac_addr[3],
                        sc->link_params.mac_addr[4],
                        sc->link_params.mac_addr[5]);
        PMD_INIT_LOG(DEBUG, "%12s : %s", "RX Mode", get_rx_mode(sc->rx_mode));
        PMD_INIT_LOG(DEBUG, "%12s : %s", "State", get_state(sc->state));
        if (sc->recovery_state)
                PMD_INIT_LOG(DEBUG, "%12s : %s", "Recovery",
                             get_recovery_state(sc->recovery_state));
        PMD_INIT_LOG(DEBUG, "%12s : CQ = %lx,  EQ = %lx", "SPQ Left",
                     sc->cq_spq_left, sc->eq_spq_left);
        PMD_INIT_LOG(DEBUG, "%12s : %x", "Switch", sc->link_params.switch_cfg);
        PMD_INIT_LOG(DEBUG, "\n\n===================================\n");
}