]> git.proxmox.com Git - ceph.git/blob - ceph/src/spdk/dpdk/drivers/net/mlx5/mlx5_vlan.c
import 15.2.0 Octopus source
[ceph.git] / ceph / src / spdk / dpdk / drivers / net / mlx5 / mlx5_vlan.c
1 /* SPDX-License-Identifier: BSD-3-Clause
2 * Copyright 2015 6WIND S.A.
3 * Copyright 2015 Mellanox Technologies, Ltd
4 */
5
6 #include <stddef.h>
7 #include <errno.h>
8 #include <assert.h>
9 #include <stdint.h>
10
11 /*
12 * Not needed by this file; included to work around the lack of off_t
13 * definition for mlx5dv.h with unpatched rdma-core versions.
14 */
15 #include <sys/types.h>
16
17 /* Verbs headers do not support -pedantic. */
18 #ifdef PEDANTIC
19 #pragma GCC diagnostic ignored "-Wpedantic"
20 #endif
21 #include <infiniband/mlx5dv.h>
22 #include <infiniband/verbs.h>
23 #ifdef PEDANTIC
24 #pragma GCC diagnostic error "-Wpedantic"
25 #endif
26
27 #include <rte_ethdev_driver.h>
28 #include <rte_common.h>
29
30 #include "mlx5.h"
31 #include "mlx5_autoconf.h"
32 #include "mlx5_glue.h"
33 #include "mlx5_rxtx.h"
34 #include "mlx5_utils.h"
35
36 /**
37 * DPDK callback to configure a VLAN filter.
38 *
39 * @param dev
40 * Pointer to Ethernet device structure.
41 * @param vlan_id
42 * VLAN ID to filter.
43 * @param on
44 * Toggle filter.
45 *
46 * @return
47 * 0 on success, a negative errno value otherwise and rte_errno is set.
48 */
49 int
50 mlx5_vlan_filter_set(struct rte_eth_dev *dev, uint16_t vlan_id, int on)
51 {
52 struct mlx5_priv *priv = dev->data->dev_private;
53 unsigned int i;
54
55 DRV_LOG(DEBUG, "port %u %s VLAN filter ID %" PRIu16,
56 dev->data->port_id, (on ? "enable" : "disable"), vlan_id);
57 assert(priv->vlan_filter_n <= RTE_DIM(priv->vlan_filter));
58 for (i = 0; (i != priv->vlan_filter_n); ++i)
59 if (priv->vlan_filter[i] == vlan_id)
60 break;
61 /* Check if there's room for another VLAN filter. */
62 if (i == RTE_DIM(priv->vlan_filter)) {
63 rte_errno = ENOMEM;
64 return -rte_errno;
65 }
66 if (i < priv->vlan_filter_n) {
67 assert(priv->vlan_filter_n != 0);
68 /* Enabling an existing VLAN filter has no effect. */
69 if (on)
70 goto out;
71 /* Remove VLAN filter from list. */
72 --priv->vlan_filter_n;
73 memmove(&priv->vlan_filter[i],
74 &priv->vlan_filter[i + 1],
75 sizeof(priv->vlan_filter[i]) *
76 (priv->vlan_filter_n - i));
77 priv->vlan_filter[priv->vlan_filter_n] = 0;
78 } else {
79 assert(i == priv->vlan_filter_n);
80 /* Disabling an unknown VLAN filter has no effect. */
81 if (!on)
82 goto out;
83 /* Add new VLAN filter. */
84 priv->vlan_filter[priv->vlan_filter_n] = vlan_id;
85 ++priv->vlan_filter_n;
86 }
87 out:
88 if (dev->data->dev_started)
89 return mlx5_traffic_restart(dev);
90 return 0;
91 }
92
93 /**
94 * Callback to set/reset VLAN stripping for a specific queue.
95 *
96 * @param dev
97 * Pointer to Ethernet device structure.
98 * @param queue
99 * RX queue index.
100 * @param on
101 * Enable/disable VLAN stripping.
102 */
103 void
104 mlx5_vlan_strip_queue_set(struct rte_eth_dev *dev, uint16_t queue, int on)
105 {
106 struct mlx5_priv *priv = dev->data->dev_private;
107 struct mlx5_rxq_data *rxq = (*priv->rxqs)[queue];
108 struct mlx5_rxq_ctrl *rxq_ctrl =
109 container_of(rxq, struct mlx5_rxq_ctrl, rxq);
110 struct ibv_wq_attr mod;
111 uint16_t vlan_offloads =
112 (on ? IBV_WQ_FLAGS_CVLAN_STRIPPING : 0) |
113 0;
114 int ret;
115
116 /* Validate hw support */
117 if (!priv->config.hw_vlan_strip) {
118 DRV_LOG(ERR, "port %u VLAN stripping is not supported",
119 dev->data->port_id);
120 return;
121 }
122 /* Validate queue number */
123 if (queue >= priv->rxqs_n) {
124 DRV_LOG(ERR, "port %u VLAN stripping, invalid queue number %d",
125 dev->data->port_id, queue);
126 return;
127 }
128 DRV_LOG(DEBUG, "port %u set VLAN offloads 0x%x for port %uqueue %d",
129 dev->data->port_id, vlan_offloads, rxq->port_id, queue);
130 if (!rxq_ctrl->ibv) {
131 /* Update related bits in RX queue. */
132 rxq->vlan_strip = !!on;
133 return;
134 }
135 mod = (struct ibv_wq_attr){
136 .attr_mask = IBV_WQ_ATTR_FLAGS,
137 .flags_mask = IBV_WQ_FLAGS_CVLAN_STRIPPING,
138 .flags = vlan_offloads,
139 };
140 ret = mlx5_glue->modify_wq(rxq_ctrl->ibv->wq, &mod);
141 if (ret) {
142 DRV_LOG(ERR, "port %u failed to modified stripping mode: %s",
143 dev->data->port_id, strerror(rte_errno));
144 return;
145 }
146 /* Update related bits in RX queue. */
147 rxq->vlan_strip = !!on;
148 }
149
150 /**
151 * Callback to set/reset VLAN offloads for a port.
152 *
153 * @param dev
154 * Pointer to Ethernet device structure.
155 * @param mask
156 * VLAN offload bit mask.
157 *
158 * @return
159 * 0 on success, a negative errno value otherwise and rte_errno is set.
160 */
161 int
162 mlx5_vlan_offload_set(struct rte_eth_dev *dev, int mask)
163 {
164 struct mlx5_priv *priv = dev->data->dev_private;
165 unsigned int i;
166
167 if (mask & ETH_VLAN_STRIP_MASK) {
168 int hw_vlan_strip = !!(dev->data->dev_conf.rxmode.offloads &
169 DEV_RX_OFFLOAD_VLAN_STRIP);
170
171 if (!priv->config.hw_vlan_strip) {
172 DRV_LOG(ERR, "port %u VLAN stripping is not supported",
173 dev->data->port_id);
174 return 0;
175 }
176 /* Run on every RX queue and set/reset VLAN stripping. */
177 for (i = 0; (i != priv->rxqs_n); i++)
178 mlx5_vlan_strip_queue_set(dev, i, hw_vlan_strip);
179 }
180 return 0;
181 }