1 /* SPDX-License-Identifier: BSD-3-Clause
2 * Copyright(c) 2010-2014 Intel Corporation
11 #include <sys/queue.h>
16 #include <rte_common.h>
17 #include <rte_byteorder.h>
19 #include <rte_memory.h>
20 #include <rte_memcpy.h>
22 #include <rte_launch.h>
23 #include <rte_atomic.h>
24 #include <rte_cycles.h>
25 #include <rte_prefetch.h>
26 #include <rte_lcore.h>
27 #include <rte_per_lcore.h>
28 #include <rte_branch_prediction.h>
29 #include <rte_interrupts.h>
30 #include <rte_random.h>
31 #include <rte_debug.h>
32 #include <rte_ether.h>
33 #include <rte_ethdev.h>
34 #include <rte_mempool.h>
36 #include <rte_malloc.h>
37 #include <rte_fbk_hash.h>
40 #define RTE_LOGTYPE_IPv4_MULTICAST RTE_LOGTYPE_USER1
44 #define MCAST_CLONE_PORTS 2
45 #define MCAST_CLONE_SEGS 2
47 #define PKT_MBUF_DATA_SIZE RTE_MBUF_DEFAULT_BUF_SIZE
48 #define NB_PKT_MBUF 8192
50 #define HDR_MBUF_DATA_SIZE (2 * RTE_PKTMBUF_HEADROOM)
51 #define NB_HDR_MBUF (NB_PKT_MBUF * MAX_PORTS)
53 #define NB_CLONE_MBUF (NB_PKT_MBUF * MCAST_CLONE_PORTS * MCAST_CLONE_SEGS * 2)
55 /* allow max jumbo frame 9.5 KB */
56 #define JUMBO_FRAME_MAX_SIZE 0x2600
58 #define MAX_PKT_BURST 32
59 #define BURST_TX_DRAIN_US 100 /* TX drain every ~100us */
61 /* Configure how many packets ahead to prefetch, when reading packets */
62 #define PREFETCH_OFFSET 3
65 * Construct Ethernet multicast address from IPv4 multicast address.
66 * Citing RFC 1112, section 6.4:
67 * "An IP host group address is mapped to an Ethernet multicast address
68 * by placing the low-order 23-bits of the IP address into the low-order
69 * 23 bits of the Ethernet multicast address 01-00-5E-00-00-00 (hex)."
71 #define ETHER_ADDR_FOR_IPV4_MCAST(x) \
72 (rte_cpu_to_be_64(0x01005e000000ULL | ((x) & 0x7fffff)) >> 16)
75 * Configurable number of RX/TX ring descriptors
77 #define RTE_TEST_RX_DESC_DEFAULT 1024
78 #define RTE_TEST_TX_DESC_DEFAULT 1024
79 static uint16_t nb_rxd
= RTE_TEST_RX_DESC_DEFAULT
;
80 static uint16_t nb_txd
= RTE_TEST_TX_DESC_DEFAULT
;
82 /* ethernet addresses of ports */
83 static struct ether_addr ports_eth_addr
[MAX_PORTS
];
85 /* mask of enabled ports */
86 static uint32_t enabled_port_mask
= 0;
88 static uint16_t nb_ports
;
90 static int rx_queue_per_lcore
= 1;
94 struct rte_mbuf
*m_table
[MAX_PKT_BURST
];
97 #define MAX_RX_QUEUE_PER_LCORE 16
98 #define MAX_TX_QUEUE_PER_PORT 16
99 struct lcore_queue_conf
{
102 uint8_t rx_queue_list
[MAX_RX_QUEUE_PER_LCORE
];
103 uint16_t tx_queue_id
[MAX_PORTS
];
104 struct mbuf_table tx_mbufs
[MAX_PORTS
];
105 } __rte_cache_aligned
;
106 static struct lcore_queue_conf lcore_queue_conf
[RTE_MAX_LCORE
];
108 static struct rte_eth_conf port_conf
= {
110 .max_rx_pkt_len
= JUMBO_FRAME_MAX_SIZE
,
112 .offloads
= DEV_RX_OFFLOAD_JUMBO_FRAME
,
115 .mq_mode
= ETH_MQ_TX_NONE
,
116 .offloads
= DEV_TX_OFFLOAD_MULTI_SEGS
,
120 static struct rte_mempool
*packet_pool
, *header_pool
, *clone_pool
;
124 static struct rte_fbk_hash_params mcast_hash_params
= {
125 .name
= "MCAST_HASH",
127 .entries_per_bucket
= 4,
133 struct rte_fbk_hash_table
*mcast_hash
= NULL
;
135 struct mcast_group_params
{
140 static struct mcast_group_params mcast_group_table
[] = {
141 {IPv4(224,0,0,101), 0x1},
142 {IPv4(224,0,0,102), 0x2},
143 {IPv4(224,0,0,103), 0x3},
144 {IPv4(224,0,0,104), 0x4},
145 {IPv4(224,0,0,105), 0x5},
146 {IPv4(224,0,0,106), 0x6},
147 {IPv4(224,0,0,107), 0x7},
148 {IPv4(224,0,0,108), 0x8},
149 {IPv4(224,0,0,109), 0x9},
150 {IPv4(224,0,0,110), 0xA},
151 {IPv4(224,0,0,111), 0xB},
152 {IPv4(224,0,0,112), 0xC},
153 {IPv4(224,0,0,113), 0xD},
154 {IPv4(224,0,0,114), 0xE},
155 {IPv4(224,0,0,115), 0xF},
158 #define N_MCAST_GROUPS \
159 (sizeof (mcast_group_table) / sizeof (mcast_group_table[0]))
162 /* Send burst of packets on an output interface */
164 send_burst(struct lcore_queue_conf
*qconf
, uint16_t port
)
166 struct rte_mbuf
**m_table
;
170 queueid
= qconf
->tx_queue_id
[port
];
171 m_table
= (struct rte_mbuf
**)qconf
->tx_mbufs
[port
].m_table
;
172 n
= qconf
->tx_mbufs
[port
].len
;
174 ret
= rte_eth_tx_burst(port
, queueid
, m_table
, n
);
175 while (unlikely (ret
< n
)) {
176 rte_pktmbuf_free(m_table
[ret
]);
180 qconf
->tx_mbufs
[port
].len
= 0;
183 /* Get number of bits set. */
184 static inline uint32_t
189 for (n
= 0; v
!= 0; v
&= v
- 1, n
++)
196 * Create the output multicast packet based on the given input packet.
197 * There are two approaches for creating outgoing packet, though both
198 * are based on data zero-copy idea, they differ in few details:
199 * First one creates a clone of the input packet, e.g - walk though all
200 * segments of the input packet, and for each of them create a new packet
201 * mbuf and attach that new mbuf to the segment (refer to rte_pktmbuf_clone()
202 * for more details). Then new mbuf is allocated for the packet header
203 * and is prepended to the 'clone' mbuf.
204 * Second approach doesn't make a clone, it just increment refcnt for all
205 * input packet segments. Then it allocates new mbuf for the packet header
206 * and prepends it to the input packet.
207 * Basically first approach reuses only input packet's data, but creates
208 * it's own copy of packet's metadata. Second approach reuses both input's
209 * packet data and metadata.
210 * The advantage of first approach - is that each outgoing packet has it's
211 * own copy of metadata, so we can safely modify data pointer of the
212 * input packet. That allows us to skip creation if the output packet for
213 * the last destination port, but instead modify input packet's header inplace,
214 * e.g: for N destination ports we need to invoke mcast_out_pkt (N-1) times.
215 * The advantage of second approach - less work for each outgoing packet,
216 * e.g: we skip "clone" operation completely. Though it comes with a price -
217 * input packet's metadata has to be intact. So for N destination ports we
218 * need to invoke mcast_out_pkt N times.
219 * So for small number of outgoing ports (and segments in the input packet)
220 * first approach will be faster.
221 * As number of outgoing ports (and/or input segments) will grow,
222 * second way will become more preferable.
227 * Control which of the two approaches described above should be used:
228 * - 0 - use second approach:
229 * Don't "clone" input packet.
230 * Prepend new header directly to the input packet
231 * - 1 - use first approach:
232 * Make a "clone" of input packet first.
233 * Prepend new header to the clone of the input packet
235 * - The pointer to the new outgoing packet.
236 * - NULL if operation failed.
238 static inline struct rte_mbuf
*
239 mcast_out_pkt(struct rte_mbuf
*pkt
, int use_clone
)
241 struct rte_mbuf
*hdr
;
243 /* Create new mbuf for the header. */
244 if (unlikely ((hdr
= rte_pktmbuf_alloc(header_pool
)) == NULL
))
247 /* If requested, then make a new clone packet. */
248 if (use_clone
!= 0 &&
249 unlikely ((pkt
= rte_pktmbuf_clone(pkt
, clone_pool
)) == NULL
)) {
250 rte_pktmbuf_free(hdr
);
254 /* prepend new header */
257 /* update header's fields */
258 hdr
->pkt_len
= (uint16_t)(hdr
->data_len
+ pkt
->pkt_len
);
259 hdr
->nb_segs
= pkt
->nb_segs
+ 1;
261 __rte_mbuf_sanity_check(hdr
, 1);
266 * Write new Ethernet header to the outgoing packet,
267 * and put it into the outgoing queue for the given port.
270 mcast_send_pkt(struct rte_mbuf
*pkt
, struct ether_addr
*dest_addr
,
271 struct lcore_queue_conf
*qconf
, uint16_t port
)
273 struct ether_hdr
*ethdr
;
276 /* Construct Ethernet header. */
277 ethdr
= (struct ether_hdr
*)rte_pktmbuf_prepend(pkt
, (uint16_t)sizeof(*ethdr
));
278 RTE_ASSERT(ethdr
!= NULL
);
280 ether_addr_copy(dest_addr
, ðdr
->d_addr
);
281 ether_addr_copy(&ports_eth_addr
[port
], ðdr
->s_addr
);
282 ethdr
->ether_type
= rte_be_to_cpu_16(ETHER_TYPE_IPv4
);
284 /* Put new packet into the output queue */
285 len
= qconf
->tx_mbufs
[port
].len
;
286 qconf
->tx_mbufs
[port
].m_table
[len
] = pkt
;
287 qconf
->tx_mbufs
[port
].len
= ++len
;
289 /* Transmit packets */
290 if (unlikely(MAX_PKT_BURST
== len
))
291 send_burst(qconf
, port
);
294 /* Multicast forward of the input packet */
296 mcast_forward(struct rte_mbuf
*m
, struct lcore_queue_conf
*qconf
)
299 struct ipv4_hdr
*iphdr
;
300 uint32_t dest_addr
, port_mask
, port_num
, use_clone
;
305 struct ether_addr as_addr
;
308 /* Remove the Ethernet header from the input packet */
309 iphdr
= (struct ipv4_hdr
*)rte_pktmbuf_adj(m
, (uint16_t)sizeof(struct ether_hdr
));
310 RTE_ASSERT(iphdr
!= NULL
);
312 dest_addr
= rte_be_to_cpu_32(iphdr
->dst_addr
);
315 * Check that it is a valid multicast address and
316 * we have some active ports assigned to it.
318 if(!IS_IPV4_MCAST(dest_addr
) ||
319 (hash
= rte_fbk_hash_lookup(mcast_hash
, dest_addr
)) <= 0 ||
320 (port_mask
= hash
& enabled_port_mask
) == 0) {
325 /* Calculate number of destination ports. */
326 port_num
= bitcnt(port_mask
);
328 /* Should we use rte_pktmbuf_clone() or not. */
329 use_clone
= (port_num
<= MCAST_CLONE_PORTS
&&
330 m
->nb_segs
<= MCAST_CLONE_SEGS
);
332 /* Mark all packet's segments as referenced port_num times */
334 rte_pktmbuf_refcnt_update(m
, (uint16_t)port_num
);
336 /* construct destination ethernet address */
337 dst_eth_addr
.as_int
= ETHER_ADDR_FOR_IPV4_MCAST(dest_addr
);
339 for (port
= 0; use_clone
!= port_mask
; port_mask
>>= 1, port
++) {
341 /* Prepare output packet and send it out. */
342 if ((port_mask
& 1) != 0) {
343 if (likely ((mc
= mcast_out_pkt(m
, use_clone
)) != NULL
))
344 mcast_send_pkt(mc
, &dst_eth_addr
.as_addr
,
346 else if (use_clone
== 0)
352 * If we making clone packets, then, for the last destination port,
353 * we can overwrite input packet's metadata.
356 mcast_send_pkt(m
, &dst_eth_addr
.as_addr
, qconf
, port
);
361 /* Send burst of outgoing packet, if timeout expires. */
363 send_timeout_burst(struct lcore_queue_conf
*qconf
)
367 const uint64_t drain_tsc
= (rte_get_tsc_hz() + US_PER_S
- 1) / US_PER_S
* BURST_TX_DRAIN_US
;
369 cur_tsc
= rte_rdtsc();
370 if (likely (cur_tsc
< qconf
->tx_tsc
+ drain_tsc
))
373 for (portid
= 0; portid
< MAX_PORTS
; portid
++) {
374 if (qconf
->tx_mbufs
[portid
].len
!= 0)
375 send_burst(qconf
, portid
);
377 qconf
->tx_tsc
= cur_tsc
;
380 /* main processing loop */
382 main_loop(__rte_unused
void *dummy
)
384 struct rte_mbuf
*pkts_burst
[MAX_PKT_BURST
];
388 struct lcore_queue_conf
*qconf
;
390 lcore_id
= rte_lcore_id();
391 qconf
= &lcore_queue_conf
[lcore_id
];
394 if (qconf
->n_rx_queue
== 0) {
395 RTE_LOG(INFO
, IPv4_MULTICAST
, "lcore %u has nothing to do\n",
400 RTE_LOG(INFO
, IPv4_MULTICAST
, "entering main loop on lcore %u\n",
403 for (i
= 0; i
< qconf
->n_rx_queue
; i
++) {
405 portid
= qconf
->rx_queue_list
[i
];
406 RTE_LOG(INFO
, IPv4_MULTICAST
, " -- lcoreid=%u portid=%d\n",
413 * Read packet from RX queues
415 for (i
= 0; i
< qconf
->n_rx_queue
; i
++) {
417 portid
= qconf
->rx_queue_list
[i
];
418 nb_rx
= rte_eth_rx_burst(portid
, 0, pkts_burst
,
421 /* Prefetch first packets */
422 for (j
= 0; j
< PREFETCH_OFFSET
&& j
< nb_rx
; j
++) {
423 rte_prefetch0(rte_pktmbuf_mtod(
424 pkts_burst
[j
], void *));
427 /* Prefetch and forward already prefetched packets */
428 for (j
= 0; j
< (nb_rx
- PREFETCH_OFFSET
); j
++) {
429 rte_prefetch0(rte_pktmbuf_mtod(pkts_burst
[
430 j
+ PREFETCH_OFFSET
], void *));
431 mcast_forward(pkts_burst
[j
], qconf
);
434 /* Forward remaining prefetched packets */
435 for (; j
< nb_rx
; j
++) {
436 mcast_forward(pkts_burst
[j
], qconf
);
440 /* Send out packets from TX queues */
441 send_timeout_burst(qconf
);
447 print_usage(const char *prgname
)
449 printf("%s [EAL options] -- -p PORTMASK [-q NQ]\n"
450 " -p PORTMASK: hexadecimal bitmask of ports to configure\n"
451 " -q NQ: number of queue (=ports) per lcore (default is 1)\n",
456 parse_portmask(const char *portmask
)
461 /* parse hexadecimal string */
462 pm
= strtoul(portmask
, &end
, 16);
463 if ((portmask
[0] == '\0') || (end
== NULL
) || (*end
!= '\0'))
470 parse_nqueue(const char *q_arg
)
475 /* parse numerical string */
477 n
= strtoul(q_arg
, &end
, 0);
478 if (errno
!= 0 || end
== NULL
|| *end
!= '\0' ||
479 n
== 0 || n
>= MAX_RX_QUEUE_PER_LCORE
)
485 /* Parse the argument given in the command line of the application */
487 parse_args(int argc
, char **argv
)
492 char *prgname
= argv
[0];
493 static struct option lgopts
[] = {
499 while ((opt
= getopt_long(argc
, argvopt
, "p:q:",
500 lgopts
, &option_index
)) != EOF
) {
505 enabled_port_mask
= parse_portmask(optarg
);
506 if (enabled_port_mask
== 0) {
507 printf("invalid portmask\n");
508 print_usage(prgname
);
515 rx_queue_per_lcore
= parse_nqueue(optarg
);
516 if (rx_queue_per_lcore
< 0) {
517 printf("invalid queue number\n");
518 print_usage(prgname
);
524 print_usage(prgname
);
530 argv
[optind
-1] = prgname
;
533 optind
= 1; /* reset getopt lib */
538 print_ethaddr(const char *name
, struct ether_addr
*eth_addr
)
540 char buf
[ETHER_ADDR_FMT_SIZE
];
541 ether_format_addr(buf
, ETHER_ADDR_FMT_SIZE
, eth_addr
);
542 printf("%s%s", name
, buf
);
546 init_mcast_hash(void)
550 mcast_hash_params
.socket_id
= rte_socket_id();
551 mcast_hash
= rte_fbk_hash_create(&mcast_hash_params
);
552 if (mcast_hash
== NULL
){
556 for (i
= 0; i
< N_MCAST_GROUPS
; i
++){
557 if (rte_fbk_hash_add_key(mcast_hash
,
558 mcast_group_table
[i
].ip
,
559 mcast_group_table
[i
].port_mask
) < 0) {
567 /* Check the link status of all ports in up to 9s, and print them finally */
569 check_all_ports_link_status(uint32_t port_mask
)
571 #define CHECK_INTERVAL 100 /* 100ms */
572 #define MAX_CHECK_TIME 90 /* 9s (90 * 100ms) in total */
574 uint8_t count
, all_ports_up
, print_flag
= 0;
575 struct rte_eth_link link
;
577 printf("\nChecking link status");
579 for (count
= 0; count
<= MAX_CHECK_TIME
; count
++) {
581 RTE_ETH_FOREACH_DEV(portid
) {
582 if ((port_mask
& (1 << portid
)) == 0)
584 memset(&link
, 0, sizeof(link
));
585 rte_eth_link_get_nowait(portid
, &link
);
586 /* print link status if flag set */
587 if (print_flag
== 1) {
588 if (link
.link_status
)
590 "Port%d Link Up. Speed %u Mbps - %s\n",
591 portid
, link
.link_speed
,
592 (link
.link_duplex
== ETH_LINK_FULL_DUPLEX
) ?
593 ("full-duplex") : ("half-duplex\n"));
595 printf("Port %d Link Down\n", portid
);
598 /* clear all_ports_up flag if any link down */
599 if (link
.link_status
== ETH_LINK_DOWN
) {
604 /* after finally printing all link status, get out */
608 if (all_ports_up
== 0) {
611 rte_delay_ms(CHECK_INTERVAL
);
614 /* set the print_flag if all ports up or timeout */
615 if (all_ports_up
== 1 || count
== (MAX_CHECK_TIME
- 1)) {
623 main(int argc
, char **argv
)
625 struct lcore_queue_conf
*qconf
;
626 struct rte_eth_dev_info dev_info
;
627 struct rte_eth_txconf
*txconf
;
630 unsigned lcore_id
= 0, rx_lcore_id
= 0;
631 uint32_t n_tx_queue
, nb_lcores
;
635 ret
= rte_eal_init(argc
, argv
);
637 rte_exit(EXIT_FAILURE
, "Invalid EAL parameters\n");
641 /* parse application arguments (after the EAL ones) */
642 ret
= parse_args(argc
, argv
);
644 rte_exit(EXIT_FAILURE
, "Invalid IPV4_MULTICAST parameters\n");
646 /* create the mbuf pools */
647 packet_pool
= rte_pktmbuf_pool_create("packet_pool", NB_PKT_MBUF
, 32,
648 0, PKT_MBUF_DATA_SIZE
, rte_socket_id());
650 if (packet_pool
== NULL
)
651 rte_exit(EXIT_FAILURE
, "Cannot init packet mbuf pool\n");
653 header_pool
= rte_pktmbuf_pool_create("header_pool", NB_HDR_MBUF
, 32,
654 0, HDR_MBUF_DATA_SIZE
, rte_socket_id());
656 if (header_pool
== NULL
)
657 rte_exit(EXIT_FAILURE
, "Cannot init header mbuf pool\n");
659 clone_pool
= rte_pktmbuf_pool_create("clone_pool", NB_CLONE_MBUF
, 32,
660 0, 0, rte_socket_id());
662 if (clone_pool
== NULL
)
663 rte_exit(EXIT_FAILURE
, "Cannot init clone mbuf pool\n");
665 nb_ports
= rte_eth_dev_count_avail();
667 rte_exit(EXIT_FAILURE
, "No physical ports!\n");
668 if (nb_ports
> MAX_PORTS
)
669 nb_ports
= MAX_PORTS
;
671 nb_lcores
= rte_lcore_count();
673 /* initialize all ports */
674 RTE_ETH_FOREACH_DEV(portid
) {
675 struct rte_eth_rxconf rxq_conf
;
676 struct rte_eth_conf local_port_conf
= port_conf
;
678 /* skip ports that are not enabled */
679 if ((enabled_port_mask
& (1 << portid
)) == 0) {
680 printf("Skipping disabled port %d\n", portid
);
684 qconf
= &lcore_queue_conf
[rx_lcore_id
];
686 /* limit the frame size to the maximum supported by NIC */
687 rte_eth_dev_info_get(portid
, &dev_info
);
688 local_port_conf
.rxmode
.max_rx_pkt_len
= RTE_MIN(
689 dev_info
.max_rx_pktlen
,
690 local_port_conf
.rxmode
.max_rx_pkt_len
);
692 /* get the lcore_id for this port */
693 while (rte_lcore_is_enabled(rx_lcore_id
) == 0 ||
694 qconf
->n_rx_queue
== (unsigned)rx_queue_per_lcore
) {
697 qconf
= &lcore_queue_conf
[rx_lcore_id
];
699 if (rx_lcore_id
>= RTE_MAX_LCORE
)
700 rte_exit(EXIT_FAILURE
, "Not enough cores\n");
702 qconf
->rx_queue_list
[qconf
->n_rx_queue
] = portid
;
706 printf("Initializing port %d on lcore %u... ", portid
,
710 n_tx_queue
= nb_lcores
;
711 if (n_tx_queue
> MAX_TX_QUEUE_PER_PORT
)
712 n_tx_queue
= MAX_TX_QUEUE_PER_PORT
;
714 ret
= rte_eth_dev_configure(portid
, 1, (uint16_t)n_tx_queue
,
717 rte_exit(EXIT_FAILURE
, "Cannot configure device: err=%d, port=%d\n",
720 ret
= rte_eth_dev_adjust_nb_rx_tx_desc(portid
, &nb_rxd
,
723 rte_exit(EXIT_FAILURE
,
724 "Cannot adjust number of descriptors: err=%d, port=%d\n",
727 rte_eth_macaddr_get(portid
, &ports_eth_addr
[portid
]);
728 print_ethaddr(" Address:", &ports_eth_addr
[portid
]);
731 /* init one RX queue */
733 printf("rxq=%hu ", queueid
);
735 rxq_conf
= dev_info
.default_rxconf
;
736 rxq_conf
.offloads
= local_port_conf
.rxmode
.offloads
;
737 ret
= rte_eth_rx_queue_setup(portid
, queueid
, nb_rxd
,
738 rte_eth_dev_socket_id(portid
),
742 rte_exit(EXIT_FAILURE
, "rte_eth_tx_queue_setup: err=%d, port=%d\n",
745 /* init one TX queue per couple (lcore,port) */
748 RTE_LCORE_FOREACH(lcore_id
) {
749 if (rte_lcore_is_enabled(lcore_id
) == 0)
751 printf("txq=%u,%hu ", lcore_id
, queueid
);
754 txconf
= &dev_info
.default_txconf
;
755 txconf
->offloads
= local_port_conf
.txmode
.offloads
;
756 ret
= rte_eth_tx_queue_setup(portid
, queueid
, nb_txd
,
757 rte_lcore_to_socket_id(lcore_id
), txconf
);
759 rte_exit(EXIT_FAILURE
, "rte_eth_tx_queue_setup: err=%d, "
760 "port=%d\n", ret
, portid
);
762 qconf
= &lcore_queue_conf
[lcore_id
];
763 qconf
->tx_queue_id
[portid
] = queueid
;
766 rte_eth_allmulticast_enable(portid
);
768 ret
= rte_eth_dev_start(portid
);
770 rte_exit(EXIT_FAILURE
, "rte_eth_dev_start: err=%d, port=%d\n",
776 check_all_ports_link_status(enabled_port_mask
);
778 /* initialize the multicast hash */
779 int retval
= init_mcast_hash();
781 rte_exit(EXIT_FAILURE
, "Cannot build the multicast hash\n");
783 /* launch per-lcore init on every lcore */
784 rte_eal_mp_remote_launch(main_loop
, NULL
, CALL_MASTER
);
785 RTE_LCORE_FOREACH_SLAVE(lcore_id
) {
786 if (rte_eal_wait_lcore(lcore_id
) < 0)