3 # qemu configure script (c) 2003 Fabrice Bellard
5 # set temporary file name
6 if test ! -z "$TMPDIR" ; then
8 elif test ! -z "$TEMPDIR" ; then
14 TMPC
="${TMPDIR1}/qemu-conf-${RANDOM}-$$-${RANDOM}.c"
15 TMPO
="${TMPDIR1}/qemu-conf-${RANDOM}-$$-${RANDOM}.o"
16 TMPE
="${TMPDIR1}/qemu-conf-${RANDOM}-$$-${RANDOM}"
17 TMPS
="${TMPDIR1}/qemu-conf-${RANDOM}-$$-${RANDOM}.S"
21 interp_prefix
="/usr/gnemul/qemu-%M"
32 i386|i486|i586|i686|i86pc|BePC
)
44 "Power Macintosh"|ppc|ppc64
)
94 CFLAGS
="-O2 -mno-cygwin"
102 if [ "$cpu" = "i386" ] ; then
121 if [ "$cpu" = "i386" -o "$cpu" = "x86_64" ] ; then
127 if [ "$bsd" = "yes" ] ; then
128 if [ ! "$darwin" = "yes" ] ; then
134 # XXX: we assume an absolute path is given when launching configure,
135 # except in './configure' case.
136 source_path
=${0%configure}
137 source_path
=${source_path%/}
138 source_path_used
="yes"
139 if test -z "$source_path" -o "$source_path" = "." ; then
141 source_path_used
="no"
146 --prefix=*) prefix
=`echo $opt | cut -d '=' -f 2`
148 --interp-prefix=*) interp_prefix
=`echo $opt | cut -d '=' -f 2`
150 --source-path=*) source_path
=`echo $opt | cut -d '=' -f 2`
152 --cross-prefix=*) cross_prefix
=`echo $opt | cut -d '=' -f 2`
154 --cc=*) cc
=`echo $opt | cut -d '=' -f 2`
156 --make=*) make=`echo $opt | cut -d '=' -f 2`
158 --extra-cflags=*) CFLAGS
="${opt#--extra-cflags=}"
160 --extra-ldflags=*) LDFLAGS
="${opt#--extra-ldflags=}"
162 --cpu=*) cpu
=`echo $opt | cut -d '=' -f 2`
164 --target-list=*) target_list
=${opt#--target-list=}
166 --enable-gprof) gprof
="yes"
168 --static) static
="yes"
170 --disable-sdl) sdl
="no"
172 --enable-fmod) fmod
="yes"
174 --fmod-lib=*) fmod_lib
=${opt#--fmod-lib=}
176 --fmod-inc=*) fmod_inc
=${opt#--fmod-inc=}
178 --enable-mingw32) mingw32
="yes" ; cross_prefix
="i386-mingw32-"
180 --disable-slirp) slirp
="no"
182 --enable-adlib) adlib
="yes"
184 --disable-kqemu) kqemu
="no"
186 --kernel-path=*) kernel_path
=${opt#--kernel-path=}
188 --enable-cocoa) cocoa
="yes" ; sdl
="no"
190 --disable-gfx-check) check_gfx
="no"
195 # Checking for CFLAGS
196 if test -z "$CFLAGS"; then
200 cc
="${cross_prefix}${cc}"
201 ar="${cross_prefix}${ar}"
202 strip
="${cross_prefix}${strip}"
204 if test "$mingw32" = "yes" ; then
209 if [ "$cpu" = "i386" ] ; then
214 if test -z "$target_list" ; then
215 # these targets are portable
216 target_list
="i386-softmmu ppc-softmmu sparc-softmmu x86_64-softmmu"
217 # the following are Linux specific
218 if [ "$linux" = "yes" ] ; then
219 target_list
="i386-user arm-user armeb-user sparc-user ppc-user $target_list"
222 target_list
=$
(echo "$target_list" |
sed -e 's/,/ /g')
225 if test -z "$cross_prefix" ; then
228 # big/little endian test
230 #include <inttypes.h>
231 int main(int argc, char ** argv){
232 volatile uint32_t i=0x01234567;
233 return (*((uint8_t*)(&i))) == 0x67;
237 if $cc -o $TMPE $TMPC 2>/dev
/null
; then
238 $TMPE && bigendian
="yes"
240 echo big
/little
test failed
245 # if cross compiling, cannot launch a program, so make a static guess
246 if test "$cpu" = "powerpc" -o "$cpu" = "mips" -o "$cpu" = "s390" -o "$cpu" = "sparc" -o "$cpu" = "sparc64" -o "$cpu" = "m68k" -o "$cpu" = "armv4b"; then
252 # host long bits test
254 if test "$cpu" = "sparc64" -o "$cpu" = "ia64" -o "$cpu" = "x86_64" -o "$cpu" = "alpha"; then
258 # check gcc options support
264 have_gcc3_options
="no"
265 if $cc -fno-reorder-blocks -fno-optimize-sibling-calls -o $TMPO $TMPC 2> /dev
/null
; then
266 have_gcc3_options
="yes"
269 ##########################################
274 if test -z "$sdl" ; then
276 sdl_config
="sdl-config"
280 if test "$mingw32" = "yes" -a ! -z "$cross_prefix" ; then
281 # win32 cross compilation case
282 sdl_config
="i386-mingw32msvc-sdl-config"
288 #undef main /* We don't want SDL to override our main() */
289 int main( void ) { return SDL_Init (SDL_INIT_VIDEO); }
292 if $cc -o $TMPE `$sdl_config --cflags 2> /dev/null` $TMPC `$sdl_config --libs 2> /dev/null` 2> /dev
/null
; then
293 _sdlversion
=`$sdl_config --version | sed 's/[^0-9]//g'`
294 if test "$_sdlversion" -lt 121 ; then
300 # static link with sdl ?
301 if test "$sdl" = "yes" ; then
303 `$sdl_config --static-libs | grep \\\-laa > /dev/null` && aa
="yes"
304 sdl_static_libs
=`$sdl_config --static-libs`
305 if [ "$aa" = "yes" ] ; then
306 sdl_static_libs
="$sdl_static_libs `aalib-config --static-libs`"
309 if $cc -o $TMPE `$sdl_config --cflags 2> /dev/null` $TMPC $sdl_static_libs 2> /dev
/null
; then
315 fi # sdl compile test
317 fi # cross compilation
320 if test x
"$1" = x
"-h" -o x
"$1" = x
"--help" ; then
323 Usage: configure [options]
324 Options: [defaults in brackets after descriptions]
327 echo "Standard options:"
328 echo " --help print this message"
329 echo " --prefix=PREFIX install in PREFIX [$prefix]"
330 echo " --interp-prefix=PREFIX where to find shared libraries, etc."
331 echo " use %M for cpu name [$interp_prefix]"
332 echo " --target-list=LIST set target list [$target_list]"
334 echo "kqemu kernel acceleration support:"
335 echo " --disable-kqemu disable kqemu build"
336 echo " --kernel-path=PATH set the kernel path (configure probes it)"
338 echo "Advanced options (experts only):"
339 echo " --source-path=PATH path of source code [$source_path]"
340 echo " --cross-prefix=PREFIX use PREFIX for compile tools [$cross_prefix]"
341 echo " --cc=CC use C compiler CC [$cc]"
342 echo " --make=MAKE use specified make [$make]"
343 echo " --static enable static build [$static]"
344 echo " --enable-mingw32 enable Win32 cross compilation with mingw32"
345 echo " --enable-adlib enable Adlib emulation"
346 echo " --enable-fmod enable FMOD audio output driver"
347 echo " --fmod-lib path to FMOD library"
348 echo " --fmod-inc path to FMOD includes"
350 echo "NOTE: The object files are build at the place where configure is launched"
354 if test "$mingw32" = "yes" ; then
355 if test -z "$prefix" ; then
356 prefix
="/c/Program Files/Qemu"
363 if test -z "$prefix" ; then
366 mandir
="$prefix/share/man"
367 datadir
="$prefix/share/qemu"
368 docdir
="$prefix/share/doc/qemu"
373 if test $kqemu = "yes" ; then
374 # test if the source code is installed
375 if test '!' -f "kqemu/Makefile" ; then
380 # Linux specific kqemu configuration
381 if test $kqemu = "yes" -a $linux = "yes" ; then
382 # find the kernel path
383 if test -z "$kernel_path" ; then
384 kernel_version
=`uname -r`
385 kernel_path
="/lib/modules/$kernel_version/build"
386 if test '!' -d "$kernel_path/include" ; then
387 kernel_path
="/usr/src/linux"
388 if test '!' -d "$kernel_path/include" ; then
389 echo "Could not find kernel includes in /lib/modules or /usr/src/linux - cannot build the kqemu module"
395 if test $kqemu = "yes" ; then
397 # test that the kernel config is present
398 if test '!' -f "$kernel_path/Makefile" ; then
399 echo "No Makefile file present in $kernel_path - kqemu cannot be built"
403 # find build system (2.6 or legacy)
405 if grep -q "PATCHLEVEL = 4" $kernel_path/Makefile
; then
414 echo "Install prefix $prefix"
415 echo "BIOS directory $datadir"
416 echo "binary directory $bindir"
417 if test "$mingw32" = "no" ; then
418 echo "Manual directory $mandir"
419 echo "ELF interp prefix $interp_prefix"
421 echo "Source path $source_path"
422 echo "C compiler $cc"
425 echo "host big endian $bigendian"
426 echo "target list $target_list"
427 echo "gprof enabled $gprof"
428 echo "static build $static"
429 if test "$darwin" = "yes" ; then
430 echo "Cocoa support $cocoa"
432 echo "SDL support $sdl"
433 if test "$sdl" != "no" ; then
434 echo "SDL static link $sdl_static"
436 echo "mingw32 support $mingw32"
437 echo "Adlib support $adlib"
438 echo -n "FMOD support $fmod"
439 if test $fmod = "yes"; then
440 echo -n " (lib='$fmod_lib' include='$fmod_inc')"
443 echo "kqemu support $kqemu"
444 if test $kqemu = "yes" -a $linux = "yes" ; then
446 echo "KQEMU Linux module configuration:"
447 echo "kernel sources $kernel_path"
448 echo -n "kbuild type "
449 if test $kbuild26 = "yes"; then
456 if test $sdl_too_old = "yes"; then
457 echo "-> Your SDL version is too old - please upgrade to have SDL support"
459 #if test "$sdl_static" = "no"; then
460 # echo "WARNING: cannot compile statically with SDL - qemu-fast won't have a graphical output"
463 config_mak
="config-host.mak"
464 config_h
="config-host.h"
466 #echo "Creating $config_mak and $config_h"
468 echo "# Automatically generated by configure - do not modify" > $config_mak
469 echo "/* Automatically generated by configure - do not modify */" > $config_h
471 echo "prefix=$prefix" >> $config_mak
472 echo "bindir=$bindir" >> $config_mak
473 echo "mandir=$mandir" >> $config_mak
474 echo "datadir=$datadir" >> $config_mak
475 echo "docdir=$docdir" >> $config_mak
476 echo "#define CONFIG_QEMU_SHAREDIR \"$datadir\"" >> $config_h
477 echo "MAKE=$make" >> $config_mak
478 echo "CC=$cc" >> $config_mak
479 if test "$have_gcc3_options" = "yes" ; then
480 echo "HAVE_GCC3_OPTIONS=yes" >> $config_mak
482 echo "HOST_CC=$host_cc" >> $config_mak
483 echo "AR=$ar" >> $config_mak
484 echo "STRIP=$strip -s -R .comment -R .note" >> $config_mak
485 echo "CFLAGS=$CFLAGS" >> $config_mak
486 echo "LDFLAGS=$LDFLAGS" >> $config_mak
487 echo "EXESUF=$EXESUF" >> $config_mak
488 if test "$cpu" = "i386" ; then
489 echo "ARCH=i386" >> $config_mak
490 echo "#define HOST_I386 1" >> $config_h
491 elif test "$cpu" = "x86_64" ; then
492 echo "ARCH=x86_64" >> $config_mak
493 echo "#define HOST_X86_64 1" >> $config_h
494 elif test "$cpu" = "armv4b" ; then
495 echo "ARCH=arm" >> $config_mak
496 echo "#define HOST_ARM 1" >> $config_h
497 elif test "$cpu" = "armv4l" ; then
498 echo "ARCH=arm" >> $config_mak
499 echo "#define HOST_ARM 1" >> $config_h
500 elif test "$cpu" = "powerpc" ; then
501 echo "ARCH=ppc" >> $config_mak
502 echo "#define HOST_PPC 1" >> $config_h
503 elif test "$cpu" = "mips" ; then
504 echo "ARCH=mips" >> $config_mak
505 echo "#define HOST_MIPS 1" >> $config_h
506 elif test "$cpu" = "s390" ; then
507 echo "ARCH=s390" >> $config_mak
508 echo "#define HOST_S390 1" >> $config_h
509 elif test "$cpu" = "alpha" ; then
510 echo "ARCH=alpha" >> $config_mak
511 echo "#define HOST_ALPHA 1" >> $config_h
512 elif test "$cpu" = "sparc" ; then
513 echo "ARCH=sparc" >> $config_mak
514 echo "#define HOST_SPARC 1" >> $config_h
515 elif test "$cpu" = "sparc64" ; then
516 echo "ARCH=sparc64" >> $config_mak
517 echo "#define HOST_SPARC64 1" >> $config_h
518 elif test "$cpu" = "ia64" ; then
519 echo "ARCH=ia64" >> $config_mak
520 echo "#define HOST_IA64 1" >> $config_h
521 elif test "$cpu" = "m68k" ; then
522 echo "ARCH=m68k" >> $config_mak
523 echo "#define HOST_M68K 1" >> $config_h
525 echo "Unsupported CPU"
528 if test "$bigendian" = "yes" ; then
529 echo "WORDS_BIGENDIAN=yes" >> $config_mak
530 echo "#define WORDS_BIGENDIAN 1" >> $config_h
532 echo "#define HOST_LONG_BITS $hostlongbits" >> $config_h
533 if test "$mingw32" = "yes" ; then
534 echo "CONFIG_WIN32=yes" >> $config_mak
535 echo "#define CONFIG_WIN32 1" >> $config_h
536 elif test -f "/usr/include/byteswap.h" ; then
537 echo "#define HAVE_BYTESWAP_H 1" >> $config_h
539 if test "$darwin" = "yes" ; then
540 echo "CONFIG_DARWIN=yes" >> $config_mak
541 echo "#define CONFIG_DARWIN 1" >> $config_h
543 if test "$gdbstub" = "yes" ; then
544 echo "CONFIG_GDBSTUB=yes" >> $config_mak
545 echo "#define CONFIG_GDBSTUB 1" >> $config_h
547 if test "$gprof" = "yes" ; then
548 echo "TARGET_GPROF=yes" >> $config_mak
549 echo "#define HAVE_GPROF 1" >> $config_h
551 if test "$static" = "yes" ; then
552 echo "CONFIG_STATIC=yes" >> $config_mak
553 echo "#define CONFIG_STATIC 1" >> $config_h
555 if test "$slirp" = "yes" ; then
556 echo "CONFIG_SLIRP=yes" >> $config_mak
557 echo "#define CONFIG_SLIRP 1" >> $config_h
559 if test "$adlib" = "yes" ; then
560 echo "CONFIG_ADLIB=yes" >> $config_mak
561 echo "#define CONFIG_ADLIB 1" >> $config_h
563 if test "$oss" = "yes" ; then
564 echo "CONFIG_OSS=yes" >> $config_mak
565 echo "#define CONFIG_OSS 1" >> $config_h
567 if test "$fmod" = "yes" ; then
568 echo "CONFIG_FMOD=yes" >> $config_mak
569 echo "CONFIG_FMOD_LIB=$fmod_lib" >> $config_mak
570 echo "CONFIG_FMOD_INC=$fmod_inc" >> $config_mak
571 echo "#define CONFIG_FMOD 1" >> $config_h
573 echo -n "VERSION=" >>$config_mak
574 head $source_path/VERSION
>>$config_mak
575 echo "" >>$config_mak
576 echo -n "#define QEMU_VERSION \"" >> $config_h
577 head $source_path/VERSION
>> $config_h
578 echo "\"" >> $config_h
580 if test $kqemu = "yes" ; then
581 echo "CONFIG_KQEMU=yes" >> $config_mak
582 if test $linux = "yes" ; then
583 echo "KERNEL_PATH=$kernel_path" >> $config_mak
584 if test $kbuild26 = "yes" ; then
585 echo "CONFIG_KBUILD26=yes" >> $config_mak
589 echo "SRC_PATH=$source_path" >> $config_mak
590 echo "TARGET_DIRS=$target_list" >> $config_mak
593 if [ "$bsd" = "yes" ] ; then
594 echo "#define O_LARGEFILE 0" >> $config_h
595 echo "#define MAP_ANONYMOUS MAP_ANON" >> $config_h
596 echo "#define _BSD 1" >> $config_h
599 for target
in $target_list; do
602 config_mak
=$target_dir/config.mak
603 config_h
=$target_dir/config.h
604 target_cpu
=`echo $target | cut -d '-' -f 1`
605 target_bigendian
="no"
606 [ "$target_cpu" = "armeb" ] && target_bigendian
=yes
607 [ "$target_cpu" = "sparc" ] && target_bigendian
=yes
608 [ "$target_cpu" = "sparc64" ] && target_bigendian
=yes
609 [ "$target_cpu" = "ppc" ] && target_bigendian
=yes
611 if expr $target : '.*-softmmu' > /dev
/null
; then
614 target_user_only
="no"
615 if expr $target : '.*-user' > /dev
/null
; then
616 target_user_only
="yes"
619 if test "$target_user_only" = "no" -a "$check_gfx" = "yes" \
620 -a "$sdl" = "no" -a "$cocoa" = "no" ; then
621 echo "ERROR: QEMU requires SDL or Cocoa for graphical output"
622 echo "To build QEMU with graphical output configure with --disable-gfx-check"
623 echo "Note that this will disable all output from the virtual graphics card."
627 #echo "Creating $config_mak, $config_h and $target_dir/Makefile"
630 mkdir
-p $target_dir/fpu
631 if test "$target" = "arm-user" -o "$target" = "armeb-user" ; then
632 mkdir
-p $target_dir/nwfpe
634 if test "$target_user_only" = "no" ; then
635 mkdir
-p $target_dir/slirp
638 ln -sf $source_path/Makefile.target
$target_dir/Makefile
640 echo "# Automatically generated by configure - do not modify" > $config_mak
641 echo "/* Automatically generated by configure - do not modify */" > $config_h
644 echo "include ../config-host.mak" >> $config_mak
645 echo "#include \"../config-host.h\"" >> $config_h
647 interp_prefix1
=`echo "$interp_prefix" | sed "s/%M/$target_cpu/g"`
648 echo "#define CONFIG_QEMU_PREFIX \"$interp_prefix1\"" >> $config_h
650 if test "$target_cpu" = "i386" ; then
651 echo "TARGET_ARCH=i386" >> $config_mak
652 echo "#define TARGET_ARCH \"i386\"" >> $config_h
653 echo "#define TARGET_I386 1" >> $config_h
654 if test $kqemu = "yes" -a "$target_softmmu" = "yes" -a $cpu = "i386" ; then
655 echo "#define USE_KQEMU 1" >> $config_h
657 elif test "$target_cpu" = "arm" -o "$target_cpu" = "armeb" ; then
658 echo "TARGET_ARCH=arm" >> $config_mak
659 echo "#define TARGET_ARCH \"arm\"" >> $config_h
660 echo "#define TARGET_ARM 1" >> $config_h
661 elif test "$target_cpu" = "sparc" ; then
662 echo "TARGET_ARCH=sparc" >> $config_mak
663 echo "#define TARGET_ARCH \"sparc\"" >> $config_h
664 echo "#define TARGET_SPARC 1" >> $config_h
665 elif test "$target_cpu" = "sparc64" ; then
666 echo "TARGET_ARCH=sparc64" >> $config_mak
667 echo "#define TARGET_ARCH \"sparc64\"" >> $config_h
668 echo "#define TARGET_SPARC 1" >> $config_h
669 echo "#define TARGET_SPARC64 1" >> $config_h
670 elif test "$target_cpu" = "ppc" ; then
671 echo "TARGET_ARCH=ppc" >> $config_mak
672 echo "#define TARGET_ARCH \"ppc\"" >> $config_h
673 echo "#define TARGET_PPC 1" >> $config_h
674 elif test "$target_cpu" = "x86_64" ; then
675 echo "TARGET_ARCH=x86_64" >> $config_mak
676 echo "#define TARGET_ARCH \"x86_64\"" >> $config_h
677 echo "#define TARGET_I386 1" >> $config_h
678 echo "#define TARGET_X86_64 1" >> $config_h
679 if test $kqemu = "yes" -a "$target_softmmu" = "yes" -a $cpu = "x86_64" ; then
680 echo "#define USE_KQEMU 1" >> $config_h
683 echo "Unsupported target CPU"
686 if test "$target_bigendian" = "yes" ; then
687 echo "TARGET_WORDS_BIGENDIAN=yes" >> $config_mak
688 echo "#define TARGET_WORDS_BIGENDIAN 1" >> $config_h
690 if test "$target_softmmu" = "yes" ; then
691 echo "CONFIG_SOFTMMU=yes" >> $config_mak
692 echo "#define CONFIG_SOFTMMU 1" >> $config_h
694 if test "$target_user_only" = "yes" ; then
695 echo "CONFIG_USER_ONLY=yes" >> $config_mak
696 echo "#define CONFIG_USER_ONLY 1" >> $config_h
699 if test "$target_cpu" = "arm" -o "$target_cpu" = "armeb" ; then
700 echo "CONFIG_SOFTFLOAT=yes" >> $config_mak
701 echo "#define CONFIG_SOFTFLOAT 1" >> $config_h
705 if test "$target_user_only" = "no"; then
706 if test "$target_softmmu" = "no" -o "$static" = "yes"; then
711 if test "$sdl1" = "yes" ; then
712 echo "#define CONFIG_SDL 1" >> $config_h
713 echo "CONFIG_SDL=yes" >> $config_mak
714 if test "$target_softmmu" = "no" -o "$static" = "yes"; then
715 echo "SDL_LIBS=$sdl_static_libs" >> $config_mak
717 echo "SDL_LIBS=`$sdl_config --libs`" >> $config_mak
719 echo -n "SDL_CFLAGS=`$sdl_config --cflags`" >> $config_mak
720 if [ "${aa}" = "yes" ] ; then
721 echo -n " `aalib-config --cflags`" >> $config_mak ;
723 echo "" >> $config_mak
727 if test "$cocoa" = "yes" ; then
728 echo "#define CONFIG_COCOA 1" >> $config_h
729 echo "CONFIG_COCOA=yes" >> $config_mak
732 done # for target in $targets
734 # build tree in object directory if source path is different from current one
735 if test "$source_path_used" = "yes" ; then
737 FILES
="Makefile tests/Makefile"
738 for dir
in $DIRS ; do
742 ln -sf $source_path/$f $f
746 rm -f $TMPO $TMPC $TMPE $TMPS