drivers/ata/Kconfig

   1 # SPDX-License-Identifier: GPL-2.0
   2 #
   3 # SATA/PATA driver configuration
   4 #
   5
   6 config HAVE_PATA_PLATFORM
   7         bool
   8         help
   9           This is an internal configuration node for any machine that
  10           uses pata-platform driver to enable the relevant driver in the
  11           configuration structure without having to submit endless patches
  12           to update the PATA_PLATFORM entry.
  13
  14 menuconfig ATA
  15         tristate "Serial ATA and Parallel ATA drivers (libata)"
  16         depends on HAS_IOMEM
  17         depends on BLOCK
  18         select SCSI
  19         select GLOB
  20         ---help---
  21           If you want to use an ATA hard disk, ATA tape drive, ATA CD-ROM or
  22           any other ATA device under Linux, say Y and make sure that you know
  23           the name of your ATA host adapter (the card inside your computer
  24           that "speaks" the ATA protocol, also called ATA controller),
  25           because you will be asked for it.
  26
  27           NOTE: ATA enables basic SCSI support; *however*,
  28           'SCSI disk support', 'SCSI tape support', or
  29           'SCSI CDROM support' may also be needed,
  30           depending on your hardware configuration.
  31
  32 if ATA
  33
  34 config ATA_NONSTANDARD
  35        bool
  36
  37 config ATA_VERBOSE_ERROR
  38         bool "Verbose ATA error reporting"
  39         default y
  40         help
  41           This option adds parsing of ATA command descriptions and error bits
  42           in libata kernel output, making it easier to interpret.
  43           This option will enlarge the kernel by approx. 6KB. Disable it only
  44           if kernel size is more important than ease of debugging.
  45
  46           If unsure, say Y.
  47
  48 config ATA_ACPI
  49         bool "ATA ACPI Support"
  50         depends on ACPI
  51         default y
  52         help
  53           This option adds support for ATA-related ACPI objects.
  54           These ACPI objects add the ability to retrieve taskfiles
  55           from the ACPI BIOS and write them to the disk controller.
  56           These objects may be related to performance, security,
  57           power management, or other areas.
  58           You can disable this at kernel boot time by using the
  59           option libata.noacpi=1
  60
  61 config SATA_ZPODD
  62         bool "SATA Zero Power Optical Disc Drive (ZPODD) support"
  63         depends on ATA_ACPI && PM
  64         help
  65           This option adds support for SATA Zero Power Optical Disc
  66           Drive (ZPODD). It requires both the ODD and the platform
  67           support, and if enabled, will automatically power on/off the
  68           ODD when certain condition is satisfied. This does not impact
  69           end user's experience of the ODD, only power is saved when
  70           the ODD is not in use (i.e. no disc inside).
  71
  72           If unsure, say N.
  73
  74 config SATA_PMP
  75         bool "SATA Port Multiplier support"
  76         default y
  77         help
  78           This option adds support for SATA Port Multipliers
  79           (the SATA version of an ethernet hub, or SAS expander).
  80
  81 if HAS_DMA
  82
  83 comment "Controllers with non-SFF native interface"
  84
  85 config SATA_AHCI
  86         tristate "AHCI SATA support"
  87         depends on PCI
  88         help
  89           This option enables support for AHCI Serial ATA.
  90
  91           If unsure, say N.
  92
  93 config SATA_MOBILE_LPM_POLICY
  94         int "Default SATA Link Power Management policy for mobile chipsets"
  95         range 0 4
  96         default 0
  97         depends on SATA_AHCI
  98         help
  99           Select the Default SATA Link Power Management (LPM) policy to use
 100           for mobile / laptop variants of chipsets / "South Bridges".
 101
 102           The value set has the following meanings:
 103                 0 => Keep firmware settings
 104                 1 => Maximum performance
 105                 2 => Medium power
 106                 3 => Medium power with Device Initiated PM enabled
 107                 4 => Minimum power
 108
 109           Note "Minimum power" is known to cause issues, including disk
 110           corruption, with some disks and should not be used.
 111
 112 config SATA_AHCI_PLATFORM
 113         tristate "Platform AHCI SATA support"
 114         help
 115           This option enables support for Platform AHCI Serial ATA
 116           controllers.
 117
 118           If unsure, say N.
 119
 120 config AHCI_BRCM
 121         tristate "Broadcom AHCI SATA support"
 122         depends on ARCH_BRCMSTB || BMIPS_GENERIC || ARCH_BCM_NSP || \
 123                    ARCH_BCM_63XX
 124         help
 125           This option enables support for the AHCI SATA3 controller found on
 126           Broadcom SoC's.
 127
 128           If unsure, say N.
 129
 130 config AHCI_DA850
 131         tristate "DaVinci DA850 AHCI SATA support"
 132         depends on ARCH_DAVINCI_DA850
 133         help
 134           This option enables support for the DaVinci DA850 SoC's
 135           onboard AHCI SATA.
 136
 137           If unsure, say N.
 138
 139 config AHCI_DM816
 140         tristate "DaVinci DM816 AHCI SATA support"
 141         depends on ARCH_OMAP2PLUS
 142         help
 143           This option enables support for the DaVinci DM816 SoC's
 144           onboard AHCI SATA controller.
 145
 146           If unsure, say N.
 147
 148 config AHCI_ST
 149         tristate "ST AHCI SATA support"
 150         depends on ARCH_STI
 151         help
 152           This option enables support for ST AHCI SATA controller.
 153
 154           If unsure, say N.
 155
 156 config AHCI_IMX
 157         tristate "Freescale i.MX AHCI SATA support"
 158         depends on MFD_SYSCON && (ARCH_MXC || COMPILE_TEST)
 159         depends on (HWMON && (THERMAL || !THERMAL_OF)) || !HWMON
 160         help
 161           This option enables support for the Freescale i.MX SoC's
 162           onboard AHCI SATA.
 163
 164           If unsure, say N.
 165
 166 config AHCI_CEVA
 167         tristate "CEVA AHCI SATA support"
 168         depends on OF
 169         help
 170           This option enables support for the CEVA AHCI SATA.
 171           It can be found on the Xilinx Zynq UltraScale+ MPSoC.
 172
 173           If unsure, say N.
 174
 175 config AHCI_MTK
 176         tristate "MediaTek AHCI SATA support"
 177         depends on ARCH_MEDIATEK
 178         select MFD_SYSCON
 179         help
 180           This option enables support for the MediaTek SoC's
 181           onboard AHCI SATA controller.
 182
 183           If unsure, say N.
 184
 185 config AHCI_MVEBU
 186         tristate "Marvell EBU AHCI SATA support"
 187         depends on ARCH_MVEBU
 188         help
 189           This option enables support for the Marvebu EBU SoC's
 190           onboard AHCI SATA.
 191
 192           If unsure, say N.
 193
 194 config AHCI_OCTEON
 195         tristate "Cavium Octeon Soc Serial ATA"
 196         depends on SATA_AHCI_PLATFORM && CAVIUM_OCTEON_SOC
 197         default y
 198         help
 199           This option enables support for Cavium Octeon SoC Serial ATA.
 200
 201           If unsure, say N.
 202
 203 config AHCI_SUNXI
 204         tristate "Allwinner sunxi AHCI SATA support"
 205         depends on ARCH_SUNXI
 206         help
 207           This option enables support for the Allwinner sunxi SoC's
 208           onboard AHCI SATA.
 209
 210           If unsure, say N.
 211
 212 config AHCI_TEGRA
 213         tristate "NVIDIA Tegra AHCI SATA support"
 214         depends on ARCH_TEGRA
 215         help
 216           This option enables support for the NVIDIA Tegra SoC's
 217           onboard AHCI SATA.
 218
 219           If unsure, say N.
 220
 221 config AHCI_XGENE
 222         tristate "APM X-Gene 6.0Gbps AHCI SATA host controller support"
 223         depends on PHY_XGENE
 224         help
 225          This option enables support for APM X-Gene SoC SATA host controller.
 226
 227 config AHCI_QORIQ
 228         tristate "Freescale QorIQ AHCI SATA support"
 229         depends on OF
 230         help
 231           This option enables support for the Freescale QorIQ AHCI SoC's
 232           onboard AHCI SATA.
 233
 234           If unsure, say N.
 235
 236 config SATA_FSL
 237         tristate "Freescale 3.0Gbps SATA support"
 238         depends on FSL_SOC
 239         help
 240           This option enables support for Freescale 3.0Gbps SATA controller.
 241           It can be found on MPC837x and MPC8315.
 242
 243           If unsure, say N.
 244
 245 config SATA_GEMINI
 246         tristate "Gemini SATA bridge support"
 247         depends on ARCH_GEMINI || COMPILE_TEST
 248         default ARCH_GEMINI
 249         help
 250           This enabled support for the FTIDE010 to SATA bridge
 251           found in Cortina Systems Gemini platform.
 252
 253           If unsure, say N.
 254
 255 config SATA_AHCI_SEATTLE
 256         tristate "AMD Seattle 6.0Gbps AHCI SATA host controller support"
 257         depends on ARCH_SEATTLE
 258         help
 259          This option enables support for AMD Seattle SATA host controller.
 260
 261          If unsure, say N
 262
 263 config SATA_INIC162X
 264         tristate "Initio 162x SATA support (Very Experimental)"
 265         depends on PCI
 266         help
 267           This option enables support for Initio 162x Serial ATA.
 268
 269 config SATA_ACARD_AHCI
 270         tristate "ACard AHCI variant (ATP 8620)"
 271         depends on PCI
 272         help
 273           This option enables support for Acard.
 274
 275           If unsure, say N.
 276
 277 config SATA_SIL24
 278         tristate "Silicon Image 3124/3132 SATA support"
 279         depends on PCI
 280         help
 281           This option enables support for Silicon Image 3124/3132 Serial ATA.
 282
 283           If unsure, say N.
 284
 285 endif # HAS_DMA
 286
 287 config ATA_SFF
 288         bool "ATA SFF support (for legacy IDE and PATA)"
 289         default y
 290         help
 291           This option adds support for ATA controllers with SFF
 292           compliant or similar programming interface.
 293
 294           SFF is the legacy IDE interface that has been around since
 295           the dawn of time.  Almost all PATA controllers have an
 296           SFF interface.  Many SATA controllers have an SFF interface
 297           when configured into a legacy compatibility mode.
 298
 299           For users with exclusively modern controllers like AHCI,
 300           Silicon Image 3124, or Marvell 6440, you may choose to
 301           disable this unneeded SFF support.
 302
 303           If unsure, say Y.
 304
 305 if ATA_SFF
 306
 307 comment "SFF controllers with custom DMA interface"
 308
 309 config PDC_ADMA
 310         tristate "Pacific Digital ADMA support"
 311         depends on PCI
 312         help
 313           This option enables support for Pacific Digital ADMA controllers
 314
 315           If unsure, say N.
 316
 317 config PATA_OCTEON_CF
 318         tristate "OCTEON Boot Bus Compact Flash support"
 319         depends on CAVIUM_OCTEON_SOC
 320         help
 321           This option enables a polled compact flash driver for use with
 322           compact flash cards attached to the OCTEON boot bus.
 323
 324           If unsure, say N.
 325
 326 config SATA_QSTOR
 327         tristate "Pacific Digital SATA QStor support"
 328         depends on PCI
 329         help
 330           This option enables support for Pacific Digital Serial ATA QStor.
 331
 332           If unsure, say N.
 333
 334 config SATA_SX4
 335         tristate "Promise SATA SX4 support (Experimental)"
 336         depends on PCI
 337         help
 338           This option enables support for Promise Serial ATA SX4.
 339
 340           If unsure, say N.
 341
 342 config ATA_BMDMA
 343         bool "ATA BMDMA support"
 344         depends on HAS_DMA
 345         default y
 346         help
 347           This option adds support for SFF ATA controllers with BMDMA
 348           capability.  BMDMA stands for bus-master DMA and is the
 349           de facto DMA interface for SFF controllers.
 350
 351           If unsure, say Y.
 352
 353 if ATA_BMDMA
 354
 355 comment "SATA SFF controllers with BMDMA"
 356
 357 config ATA_PIIX
 358         tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support"
 359         depends on PCI
 360         help
 361           This option enables support for ICH5/6/7/8 Serial ATA
 362           and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series
 363           host controllers.
 364
 365           If unsure, say N.
 366
 367 config SATA_DWC
 368         tristate "DesignWare Cores SATA support"
 369         depends on DMADEVICES
 370         select GENERIC_PHY
 371         help
 372           This option enables support for the on-chip SATA controller of the
 373           AppliedMicro processor 460EX.
 374
 375           If unsure, say N.
 376
 377 config SATA_DWC_OLD_DMA
 378         bool "Support old device trees"
 379         depends on SATA_DWC
 380         select DW_DMAC_CORE
 381         default y if 460EX
 382         help
 383           This option enables support for old device trees without the
 384           "dmas" property.
 385
 386 config SATA_DWC_DEBUG
 387         bool "Debugging driver version"
 388         depends on SATA_DWC
 389         help
 390           This option enables debugging output in the driver.
 391
 392 config SATA_DWC_VDEBUG
 393         bool "Verbose debug output"
 394         depends on SATA_DWC_DEBUG
 395         help
 396           This option enables the taskfile dumping and NCQ debugging.
 397
 398 config SATA_HIGHBANK
 399         tristate "Calxeda Highbank SATA support"
 400         depends on ARCH_HIGHBANK || COMPILE_TEST
 401         help
 402           This option enables support for the Calxeda Highbank SoC's
 403           onboard SATA.
 404
 405           If unsure, say N.
 406
 407 config SATA_MV
 408         tristate "Marvell SATA support"
 409         depends on PCI || ARCH_DOVE || ARCH_MV78XX0 || \
 410                    ARCH_MVEBU || ARCH_ORION5X || COMPILE_TEST
 411         select GENERIC_PHY
 412         help
 413           This option enables support for the Marvell Serial ATA family.
 414           Currently supports 88SX[56]0[48][01] PCI(-X) chips,
 415           as well as the newer [67]042 PCI-X/PCIe and SOC devices.
 416
 417           If unsure, say N.
 418
 419 config SATA_NV
 420         tristate "NVIDIA SATA support"
 421         depends on PCI
 422         help
 423           This option enables support for NVIDIA Serial ATA.
 424
 425           If unsure, say N.
 426
 427 config SATA_PROMISE
 428         tristate "Promise SATA TX2/TX4 support"
 429         depends on PCI
 430         help
 431           This option enables support for Promise Serial ATA TX2/TX4.
 432
 433           If unsure, say N.
 434
 435 config SATA_RCAR
 436         tristate "Renesas R-Car SATA support"
 437         depends on ARCH_RENESAS || COMPILE_TEST
 438         help
 439           This option enables support for Renesas R-Car Serial ATA.
 440
 441           If unsure, say N.
 442
 443 config SATA_SIL
 444         tristate "Silicon Image SATA support"
 445         depends on PCI
 446         help
 447           This option enables support for Silicon Image Serial ATA.
 448
 449           If unsure, say N.
 450
 451 config SATA_SIS
 452         tristate "SiS 964/965/966/180 SATA support"
 453         depends on PCI
 454         select PATA_SIS
 455         help
 456           This option enables support for SiS Serial ATA on
 457           SiS 964/965/966/180 and Parallel ATA on SiS 180.
 458           The PATA support for SiS 180 requires additionally to
 459           enable the PATA_SIS driver in the config.
 460           If unsure, say N.
 461
 462 config SATA_SVW
 463         tristate "ServerWorks Frodo / Apple K2 SATA support"
 464         depends on PCI
 465         help
 466           This option enables support for Broadcom/Serverworks/Apple K2
 467           SATA support.
 468
 469           If unsure, say N.
 470
 471 config SATA_ULI
 472         tristate "ULi Electronics SATA support"
 473         depends on PCI
 474         help
 475           This option enables support for ULi Electronics SATA.
 476
 477           If unsure, say N.
 478
 479 config SATA_VIA
 480         tristate "VIA SATA support"
 481         depends on PCI
 482         help
 483           This option enables support for VIA Serial ATA.
 484
 485           If unsure, say N.
 486
 487 config SATA_VITESSE
 488         tristate "VITESSE VSC-7174 / INTEL 31244 SATA support"
 489         depends on PCI
 490         help
 491           This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA.
 492
 493           If unsure, say N.
 494
 495 comment "PATA SFF controllers with BMDMA"
 496
 497 config PATA_ALI
 498         tristate "ALi PATA support"
 499         depends on PCI
 500         help
 501           This option enables support for the ALi ATA interfaces
 502           found on the many ALi chipsets.
 503
 504           If unsure, say N.
 505
 506 config PATA_AMD
 507         tristate "AMD/NVidia PATA support"
 508         depends on PCI
 509         help
 510           This option enables support for the AMD and NVidia PATA
 511           interfaces found on the chipsets for Athlon/Athlon64.
 512
 513           If unsure, say N.
 514
 515 config PATA_ARASAN_CF
 516         tristate "ARASAN CompactFlash PATA Controller Support"
 517         depends on ARCH_SPEAR13XX || COMPILE_TEST
 518         depends on DMADEVICES
 519         select DMA_ENGINE
 520         help
 521           Say Y here to support the ARASAN CompactFlash PATA controller
 522
 523 config PATA_ARTOP
 524         tristate "ARTOP 6210/6260 PATA support"
 525         depends on PCI
 526         help
 527           This option enables support for ARTOP PATA controllers.
 528
 529           If unsure, say N.
 530
 531 config PATA_ATIIXP
 532         tristate "ATI PATA support"
 533         depends on PCI
 534         help
 535           This option enables support for the ATI ATA interfaces
 536           found on the many ATI chipsets.
 537
 538           If unsure, say N.
 539
 540 config PATA_ATP867X
 541         tristate "ARTOP/Acard ATP867X PATA support"
 542         depends on PCI
 543         help
 544           This option enables support for ARTOP/Acard ATP867X PATA
 545           controllers.
 546
 547           If unsure, say N.
 548
 549 config PATA_BK3710
 550         tristate "Palmchip BK3710 PATA support"
 551         depends on ARCH_DAVINCI
 552         help
 553           This option enables support for the integrated IDE controller on
 554           the TI DaVinci SoC.
 555
 556           If unsure, say N.
 557
 558 config PATA_CMD64X
 559         tristate "CMD64x PATA support"
 560         depends on PCI
 561         help
 562           This option enables support for the CMD64x series chips
 563           except for the CMD640.
 564
 565           If unsure, say N.
 566
 567 config PATA_CS5520
 568         tristate "CS5510/5520 PATA support"
 569         depends on PCI && (X86_32 || COMPILE_TEST)
 570         help
 571           This option enables support for the Cyrix 5510/5520
 572           companion chip used with the MediaGX/Geode processor family.
 573
 574           If unsure, say N.
 575
 576 config PATA_CS5530
 577         tristate "CS5530 PATA support"
 578         depends on PCI && (X86_32 || COMPILE_TEST)
 579         help
 580           This option enables support for the Cyrix/NatSemi/AMD CS5530
 581           companion chip used with the MediaGX/Geode processor family.
 582
 583           If unsure, say N.
 584
 585 config PATA_CS5535
 586         tristate "CS5535 PATA support (Experimental)"
 587         depends on PCI && X86_32
 588         help
 589           This option enables support for the NatSemi/AMD CS5535
 590           companion chip used with the Geode processor family.
 591
 592           If unsure, say N.
 593
 594 config PATA_CS5536
 595         tristate "CS5536 PATA support"
 596         depends on PCI && (X86_32 || MIPS || COMPILE_TEST)
 597         help
 598           This option enables support for the AMD CS5536
 599           companion chip used with the Geode LX processor family.
 600
 601           If unsure, say N.
 602
 603 config PATA_CYPRESS
 604         tristate "Cypress CY82C693 PATA support (Very Experimental)"
 605         depends on PCI
 606         help
 607           This option enables support for the Cypress/Contaq CY82C693
 608           chipset found in some Alpha systems
 609
 610           If unsure, say N.
 611
 612 config PATA_EFAR
 613         tristate "EFAR SLC90E66 support"
 614         depends on PCI
 615         help
 616           This option enables support for the EFAR SLC90E66
 617           IDE controller found on some older machines.
 618
 619           If unsure, say N.
 620
 621 config PATA_EP93XX
 622         tristate "Cirrus Logic EP93xx PATA support"
 623         depends on ARCH_EP93XX
 624         help
 625           This option enables support for the PATA controller in
 626           the Cirrus Logic EP9312 and EP9315 ARM CPU.
 627
 628           If unsure, say N.
 629
 630 config PATA_FTIDE010
 631         tristate "Faraday Technology FTIDE010 PATA support"
 632         depends on OF
 633         depends on ARM
 634         depends on SATA_GEMINI
 635         help
 636           This option enables support for the Faraday FTIDE010
 637           PATA controller found in the Cortina Gemini SoCs.
 638
 639           If unsure, say N.
 640
 641 config PATA_HPT366
 642         tristate "HPT 366/368 PATA support"
 643         depends on PCI
 644         help
 645           This option enables support for the HPT 366 and 368
 646           PATA controllers via the new ATA layer.
 647
 648           If unsure, say N.
 649
 650 config PATA_HPT37X
 651         tristate "HPT 370/370A/371/372/374/302 PATA support"
 652         depends on PCI
 653         help
 654           This option enables support for the majority of the later HPT
 655           PATA controllers via the new ATA layer.
 656
 657           If unsure, say N.
 658
 659 config PATA_HPT3X2N
 660         tristate "HPT 371N/372N/302N PATA support"
 661         depends on PCI
 662         help
 663           This option enables support for the N variant HPT PATA
 664           controllers via the new ATA layer.
 665
 666           If unsure, say N.
 667
 668 config PATA_HPT3X3
 669         tristate "HPT 343/363 PATA support"
 670         depends on PCI
 671         help
 672           This option enables support for the HPT 343/363
 673           PATA controllers via the new ATA layer
 674
 675           If unsure, say N.
 676
 677 config PATA_HPT3X3_DMA
 678         bool "HPT 343/363 DMA support"
 679         depends on PATA_HPT3X3
 680         help
 681           This option enables DMA support for the HPT343/363
 682           controllers. Enable with care as there are still some
 683           problems with DMA on this chipset.
 684
 685 config PATA_ICSIDE
 686         tristate "Acorn ICS PATA support"
 687         depends on ARM && ARCH_ACORN
 688         help
 689           On Acorn systems, say Y here if you wish to use the ICS PATA
 690           interface card.  This is not required for ICS partition support.
 691           If you are unsure, say N to this.
 692
 693 config PATA_IMX
 694         tristate "PATA support for Freescale iMX"
 695         depends on ARCH_MXC
 696         help
 697           This option enables support for the PATA host available on Freescale
 698           iMX SoCs.
 699
 700           If unsure, say N.
 701
 702 config PATA_IT8213
 703         tristate "IT8213 PATA support (Experimental)"
 704         depends on PCI
 705         help
 706           This option enables support for the ITE 821 PATA
 707           controllers via the new ATA layer.
 708
 709           If unsure, say N.
 710
 711 config PATA_IT821X
 712         tristate "IT8211/2 PATA support"
 713         depends on PCI
 714         help
 715           This option enables support for the ITE 8211 and 8212
 716           PATA controllers via the new ATA layer, including RAID
 717           mode.
 718
 719           If unsure, say N.
 720
 721 config PATA_JMICRON
 722         tristate "JMicron PATA support"
 723         depends on PCI
 724         help
 725           Enable support for the JMicron IDE controller, via the new
 726           ATA layer.
 727
 728           If unsure, say N.
 729
 730 config PATA_MACIO
 731         tristate "Apple PowerMac/PowerBook internal 'MacIO' IDE"
 732         depends on PPC_PMAC
 733         help
 734           Most IDE capable PowerMacs have IDE busses driven by a variant
 735           of this controller which is part of the Apple chipset used on
 736           most PowerMac models. Some models have multiple busses using
 737           different chipsets, though generally, MacIO is one of them.
 738
 739 config PATA_MARVELL
 740         tristate "Marvell PATA support via legacy mode"
 741         depends on PCI
 742         help
 743           This option enables limited support for the Marvell 88SE61xx ATA
 744           controllers. If you wish to use only the SATA ports then select
 745           the AHCI driver alone. If you wish to the use the PATA port or
 746           both SATA and PATA include this driver.
 747
 748           If unsure, say N.
 749
 750 config PATA_MPC52xx
 751         tristate "Freescale MPC52xx SoC internal IDE"
 752         depends on PPC_MPC52xx && PPC_BESTCOMM
 753         select PPC_BESTCOMM_ATA
 754         help
 755           This option enables support for integrated IDE controller
 756           of the Freescale MPC52xx SoC.
 757
 758           If unsure, say N.
 759
 760 config PATA_NETCELL
 761         tristate "NETCELL Revolution RAID support"
 762         depends on PCI
 763         help
 764           This option enables support for the Netcell Revolution RAID
 765           PATA controller.
 766
 767           If unsure, say N.
 768
 769 config PATA_NINJA32
 770         tristate "Ninja32/Delkin Cardbus ATA support"
 771         depends on PCI
 772         help
 773           This option enables support for the Ninja32, Delkin and
 774           possibly other brands of Cardbus ATA adapter
 775
 776           If unsure, say N.
 777
 778 config PATA_NS87415
 779         tristate "Nat Semi NS87415 PATA support"
 780         depends on PCI
 781         help
 782           This option enables support for the National Semiconductor
 783           NS87415 PCI-IDE controller.
 784
 785           If unsure, say N.
 786
 787 config PATA_OLDPIIX
 788         tristate "Intel PATA old PIIX support"
 789         depends on PCI
 790         help
 791           This option enables support for early PIIX PATA support.
 792
 793           If unsure, say N.
 794
 795 config PATA_OPTIDMA
 796         tristate "OPTI FireStar PATA support (Very Experimental)"
 797         depends on PCI
 798         help
 799           This option enables DMA/PIO support for the later OPTi
 800           controllers found on some old motherboards and in some
 801           laptops.
 802
 803           If unsure, say N.
 804
 805 config PATA_PDC2027X
 806         tristate "Promise PATA 2027x support"
 807         depends on PCI
 808         help
 809           This option enables support for Promise PATA pdc20268 to pdc20277 host adapters.
 810
 811           If unsure, say N.
 812
 813 config PATA_PDC_OLD
 814         tristate "Older Promise PATA controller support"
 815         depends on PCI
 816         help
 817           This option enables support for the Promise 20246, 20262, 20263,
 818           20265 and 20267 adapters.
 819
 820           If unsure, say N.
 821
 822 config PATA_RADISYS
 823         tristate "RADISYS 82600 PATA support (Experimental)"
 824         depends on PCI
 825         help
 826           This option enables support for the RADISYS 82600
 827           PATA controllers via the new ATA layer
 828
 829           If unsure, say N.
 830
 831 config PATA_RDC
 832         tristate "RDC PATA support"
 833         depends on PCI
 834         help
 835           This option enables basic support for the later RDC PATA controllers
 836           controllers via the new ATA layer. For the RDC 1010, you need to
 837           enable the IT821X driver instead.
 838
 839           If unsure, say N.
 840
 841 config PATA_SC1200
 842         tristate "SC1200 PATA support"
 843         depends on PCI && (X86_32 || COMPILE_TEST)
 844         help
 845           This option enables support for the NatSemi/AMD SC1200 SoC
 846           companion chip used with the Geode processor family.
 847
 848           If unsure, say N.
 849
 850 config PATA_SCH
 851         tristate "Intel SCH PATA support"
 852         depends on PCI
 853         help
 854           This option enables support for Intel SCH PATA on the Intel
 855           SCH (US15W, US15L, UL11L) series host controllers.
 856
 857           If unsure, say N.
 858
 859 config PATA_SERVERWORKS
 860         tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support"
 861         depends on PCI
 862         help
 863           This option enables support for the Serverworks OSB4/CSB5/CSB6 and
 864           HT1000 PATA controllers, via the new ATA layer.
 865
 866           If unsure, say N.
 867
 868 config PATA_SIL680
 869         tristate "CMD / Silicon Image 680 PATA support"
 870         depends on PCI
 871         help
 872           This option enables support for CMD / Silicon Image 680 PATA.
 873
 874           If unsure, say N.
 875
 876 config PATA_SIS
 877         tristate "SiS PATA support"
 878         depends on PCI
 879         help
 880           This option enables support for SiS PATA controllers
 881
 882           If unsure, say N.
 883
 884 config PATA_TOSHIBA
 885         tristate "Toshiba Piccolo support (Experimental)"
 886         depends on PCI
 887         help
 888           Support for the Toshiba Piccolo controllers. Currently only the
 889           primary channel is supported by this driver.
 890
 891           If unsure, say N.
 892
 893 config PATA_TRIFLEX
 894         tristate "Compaq Triflex PATA support"
 895         depends on PCI
 896         help
 897           Enable support for the Compaq 'Triflex' IDE controller as found
 898           on many Compaq Pentium-Pro systems, via the new ATA layer.
 899
 900           If unsure, say N.
 901
 902 config PATA_VIA
 903         tristate "VIA PATA support"
 904         depends on PCI
 905         help
 906           This option enables support for the VIA PATA interfaces
 907           found on the many VIA chipsets.
 908
 909           If unsure, say N.
 910
 911 config PATA_PXA
 912         tristate "PXA DMA-capable PATA support"
 913         depends on ARCH_PXA
 914         help
 915           This option enables support for harddrive attached to PXA CPU's bus.
 916
 917           NOTE: This driver utilizes PXA DMA controller, in case your hardware
 918                 is not capable of doing MWDMA, use pata_platform instead.
 919
 920           If unsure, say N.
 921
 922 config PATA_WINBOND
 923         tristate "Winbond SL82C105 PATA support"
 924         depends on PCI
 925         help
 926           This option enables support for SL82C105 PATA devices found in the
 927           Netwinder and some other systems
 928
 929           If unsure, say N.
 930
 931 endif # ATA_BMDMA
 932
 933 comment "PIO-only SFF controllers"
 934
 935 config PATA_CMD640_PCI
 936         tristate "CMD640 PCI PATA support (Experimental)"
 937         depends on PCI
 938         help
 939           This option enables support for the CMD640 PCI IDE
 940           interface chip. Only the primary channel is currently
 941           supported.
 942
 943           If unsure, say N.
 944
 945 config PATA_FALCON
 946         tristate "Atari Falcon PATA support"
 947         depends on M68K && ATARI
 948         help
 949           This option enables support for the on-board IDE
 950           interface on the Atari Falcon.
 951
 952           If unsure, say N.
 953
 954 config PATA_GAYLE
 955         tristate "Amiga Gayle PATA support"
 956         depends on M68K && AMIGA
 957         help
 958           This option enables support for the on-board IDE
 959           interfaces on some Amiga models (A600, A1200,
 960           A4000 and A4000T) and also for IDE interfaces on
 961           the Zorro expansion bus (M-Tech E-Matrix 530
 962           expansion card).
 963
 964           If unsure, say N.
 965
 966 config PATA_ISAPNP
 967         tristate "ISA Plug and Play PATA support"
 968         depends on ISAPNP
 969         help
 970           This option enables support for ISA plug & play ATA
 971           controllers such as those found on old soundcards.
 972
 973           If unsure, say N.
 974
 975 config PATA_IXP4XX_CF
 976         tristate "IXP4XX Compact Flash support"
 977         depends on ARCH_IXP4XX
 978         help
 979           This option enables support for a Compact Flash connected on
 980           the ixp4xx expansion bus. This driver had been written for
 981           Loft/Avila boards in mind but can work with others.
 982
 983           If unsure, say N.
 984
 985 config PATA_MPIIX
 986         tristate "Intel PATA MPIIX support"
 987         depends on PCI
 988         help
 989           This option enables support for MPIIX PATA support.
 990
 991           If unsure, say N.
 992
 993 config PATA_NS87410
 994         tristate "Nat Semi NS87410 PATA support"
 995         depends on PCI
 996         help
 997           This option enables support for the National Semiconductor
 998           NS87410 PCI-IDE controller.
 999
1000           If unsure, say N.
1001
1002 config PATA_OPTI
1003         tristate "OPTI621/6215 PATA support (Very Experimental)"
1004         depends on PCI
1005         help
1006           This option enables full PIO support for the early Opti ATA
1007           controllers found on some old motherboards.
1008
1009           If unsure, say N.
1010
1011 config PATA_PALMLD
1012         tristate "Palm LifeDrive PATA support"
1013         depends on MACH_PALMLD
1014         help
1015           This option enables support for Palm LifeDrive's internal ATA
1016           port via the new ATA layer.
1017
1018           If unsure, say N.
1019
1020 config PATA_PCMCIA
1021         tristate "PCMCIA PATA support"
1022         depends on PCMCIA
1023         help
1024           This option enables support for PCMCIA ATA interfaces, including
1025           compact flash card adapters via the new ATA layer.
1026
1027           If unsure, say N.
1028
1029 config PATA_PLATFORM
1030         tristate "Generic platform device PATA support"
1031         depends on EXPERT || PPC || HAVE_PATA_PLATFORM
1032         help
1033           This option enables support for generic directly connected ATA
1034           devices commonly found on embedded systems.
1035
1036           If unsure, say N.
1037
1038 config PATA_OF_PLATFORM
1039         tristate "OpenFirmware platform device PATA support"
1040         depends on PATA_PLATFORM && OF
1041         help
1042           This option enables support for generic directly connected ATA
1043           devices commonly found on embedded systems with OpenFirmware
1044           bindings.
1045
1046           If unsure, say N.
1047
1048 config PATA_QDI
1049         tristate "QDI VLB PATA support"
1050         depends on ISA
1051         select PATA_LEGACY
1052         help
1053           Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
1054
1055 config PATA_RB532
1056         tristate "RouterBoard 532 PATA CompactFlash support"
1057         depends on MIKROTIK_RB532
1058         help
1059           This option enables support for the RouterBoard 532
1060           PATA CompactFlash controller.
1061
1062           If unsure, say N.
1063
1064 config PATA_RZ1000
1065         tristate "PC Tech RZ1000 PATA support"
1066         depends on PCI
1067         help
1068           This option enables basic support for the PC Tech RZ1000/1
1069           PATA controllers via the new ATA layer
1070
1071           If unsure, say N.
1072
1073 config PATA_SAMSUNG_CF
1074         tristate "Samsung SoC PATA support"
1075         depends on SAMSUNG_DEV_IDE
1076         help
1077           This option enables basic support for Samsung's S3C/S5P board
1078           PATA controllers via the new ATA layer
1079
1080           If unsure, say N.
1081
1082 config PATA_WINBOND_VLB
1083         tristate "Winbond W83759A VLB PATA support (Experimental)"
1084         depends on ISA
1085         select PATA_LEGACY
1086         help
1087           Support for the Winbond W83759A controller on Vesa Local Bus
1088           systems.
1089
1090 comment "Generic fallback / legacy drivers"
1091
1092 config PATA_ACPI
1093         tristate "ACPI firmware driver for PATA"
1094         depends on ATA_ACPI && ATA_BMDMA && PCI
1095         help
1096           This option enables an ACPI method driver which drives
1097           motherboard PATA controller interfaces through the ACPI
1098           firmware in the BIOS. This driver can sometimes handle
1099           otherwise unsupported hardware.
1100
1101 config ATA_GENERIC
1102         tristate "Generic ATA support"
1103         depends on PCI && ATA_BMDMA
1104         help
1105           This option enables support for generic BIOS configured
1106           ATA controllers via the new ATA layer
1107
1108           If unsure, say N.
1109
1110 config PATA_LEGACY
1111         tristate "Legacy ISA PATA support (Experimental)"
1112         depends on (ISA || PCI)
1113         help
1114           This option enables support for ISA/VLB/PCI bus legacy PATA
1115           ports and allows them to be accessed via the new ATA layer.
1116
1117           If unsure, say N.
1118
1119 endif # ATA_SFF
1120 endif # ATA