powerpc/tm: Fix restoring FP/VMX facility incorrectly on interrupts
CVE-2019-15031
BugLink: https://bugs.launchpad.net/bugs/1843533
When in userspace and MSR FP=0 the hardware FP state is unrelated to
the current process. This is extended for transactions where if tbegin
is run with FP=0, the hardware checkpoint FP state will also be
unrelated to the current process. Due to this, we need to ensure this
hardware checkpoint is updated with the correct state before we enable
FP for this process.
Unfortunately we get this wrong when returning to a process from a
hardware interrupt. A process that starts a transaction with FP=0 can
take an interrupt. When the kernel returns back to that process, we
change to FP=1 but with hardware checkpoint FP state not updated. If
this transaction is then rolled back, the FP registers now contain the
wrong state.
The process looks like this:
Userspace: Kernel
Start userspace
with MSR FP=0 TM=1
< -----
...
tbegin
bne
Hardware interrupt
---- >
<do_IRQ...>
....
ret_from_except
restore_math()
/* sees FP=0 */
restore_fp()
tm_active_with_fp()
/* sees FP=1 (Incorrect) */
load_fp_state()
FP = 0 -> 1
< -----
Return to userspace
with MSR TM=1 FP=1
with junk in the FP TM checkpoint
TM rollback
reads FP junk
When returning from the hardware exception, tm_active_with_fp() is
incorrectly making restore_fp() call load_fp_state() which is setting
FP=1.
The fix is to remove tm_active_with_fp().
tm_active_with_fp() is attempting to handle the case where FP state
has been changed inside a transaction. In this case the checkpointed
and transactional FP state is different and hence we must restore the
FP state (ie. we can't do lazy FP restore inside a transaction that's
used FP). It's safe to remove tm_active_with_fp() as this case is
handled by restore_tm_state(). restore_tm_state() detects if FP has
been using inside a transaction and will set load_fp and call
restore_math() to ensure the FP state (checkpoint and transaction) is
restored.
This is a data integrity problem for the current process as the FP
registers are corrupted. It's also a security problem as the FP
registers from one process may be leaked to another.
Similarly for VMX.
A simple testcase to replicate this will be posted to
tools/testing/selftests/powerpc/tm/tm-poison.c
This fixes CVE-2019-15031.
Fixes: a7771176b439 ("powerpc: Don't enable FP/Altivec if not checkpointed") Cc: stable@vger.kernel.org # 4.15+ Signed-off-by: Gustavo Romero <gromero@linux.ibm.com> Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190904045529.23002-2-gromero@linux.vnet.ibm.com
(cherry picked from commit a8318c13e79badb92bc6640704a64cc022a6eb97) Signed-off-by: Frank Heimes <frank.heimes@canonical.com> Acked-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Tyler Hicks <tyhicks@canonical.com>
[smb: dropped msr_tm_active removal as that already is done on v5.0] Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
powerpc/tm: Fix FP/VMX unavailable exceptions inside a transaction
CVE-2019-15030
BugLink: https://bugs.launchpad.net/bugs/1843533
When we take an FP unavailable exception in a transaction we have to
account for the hardware FP TM checkpointed registers being
incorrect. In this case for this process we know the current and
checkpointed FP registers must be the same (since FP wasn't used
inside the transaction) hence in the thread_struct we copy the current
FP registers to the checkpointed ones.
This copy is done in tm_reclaim_thread(). We use thread->ckpt_regs.msr
to determine if FP was on when in userspace. thread->ckpt_regs.msr
represents the state of the MSR when exiting userspace. This is setup
by check_if_tm_restore_required().
Unfortunatley there is an optimisation in giveup_all() which returns
early if tsk->thread.regs->msr (via local variable `usermsr`) has
FP=VEC=VSX=SPE=0. This optimisation means that
check_if_tm_restore_required() is not called and hence
thread->ckpt_regs.msr is not updated and will contain an old value.
This can happen if due to load_fp=255 we start a userspace process
with MSR FP=1 and then we are context switched out. In this case
thread->ckpt_regs.msr will contain FP=1. If that same process is then
context switched in and load_fp overflows, MSR will have FP=0. If that
process now enters a transaction and does an FP instruction, the FP
unavailable will not update thread->ckpt_regs.msr (the bug) and MSR
FP=1 will be retained in thread->ckpt_regs.msr. tm_reclaim_thread()
will then not perform the required memcpy and the checkpointed FP regs
in the thread struct will contain the wrong values.
The code path for this happening is:
Userspace: Kernel
Start userspace
with MSR FP/VEC/VSX/SPE=0 TM=1
< -----
...
tbegin
bne
fp instruction
FP unavailable
---- >
fp_unavailable_tm()
tm_reclaim_current()
tm_reclaim_thread()
giveup_all()
return early since FP/VMX/VSX=0
/* ckpt MSR not updated (Incorrect) */
tm_reclaim()
/* thread_struct ckpt FP regs contain junk (OK) */
/* Sees ckpt MSR FP=1 (Incorrect) */
no memcpy() performed
/* thread_struct ckpt FP regs not fixed (Incorrect) */
tm_recheckpoint()
/* Put junk in hardware checkpoint FP regs */
....
< -----
Return to userspace
with MSR TM=1 FP=1
with junk in the FP TM checkpoint
TM rollback
reads FP junk
This is a data integrity problem for the current process as the FP
registers are corrupted. It's also a security problem as the FP
registers from one process may be leaked to another.
This patch moves up check_if_tm_restore_required() in giveup_all() to
ensure thread->ckpt_regs.msr is updated correctly.
A simple testcase to replicate this will be posted to
tools/testing/selftests/powerpc/tm/tm-poison.c
Similarly for VMX.
This fixes CVE-2019-15030.
Fixes: f48e91e87e67 ("powerpc/tm: Fix FP and VMX register corruption") Cc: stable@vger.kernel.org # 4.12+ Signed-off-by: Gustavo Romero <gromero@linux.vnet.ibm.com> Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190904045529.23002-1-gromero@linux.vnet.ibm.com
(cherry picked from commit 8205d5d98ef7f155de211f5e2eb6ca03d95a5a60) Signed-off-by: Frank Heimes <frank.heimes@canonical.com> Acked-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
When malicious guest creates a vring desc with desc.len = 0,
it may cause the host kernel to crash. This bug could be trigger
during the guest migrate.
Nadav Amit [Tue, 20 Aug 2019 14:42:27 +0000 (16:42 +0200)]
x86/kprobes: Set instruction page as executable
BugLink: https://bugs.launchpad.net/bugs/1840750
Set the page as executable after allocation. This patch is a
preparatory patch for a following patch that makes module allocated
pages non-executable.
While at it, do some small cleanup of what appears to be unnecessary
masking.
Signed-off-by: Nadav Amit <namit@vmware.com> Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: <akpm@linux-foundation.org> Cc: <ard.biesheuvel@linaro.org> Cc: <deneen.t.dock@intel.com> Cc: <kernel-hardening@lists.openwall.com> Cc: <kristen@linux.intel.com> Cc: <linux_dti@icloud.com> Cc: <will.deacon@arm.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Rik van Riel <riel@surriel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190426001143.4983-11-namit@vmware.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
(cherry picked from commit 7298e24f904224fa79eb8fd7e0fbd78950ccf2db) Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Acked-by: Kamal Mostafa <kamal@canonical.com> Acked-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/1836916
The recent fix for Icelake HDMI codec introduced the mapping from pin
NID to the i915 gfx port number. However, it forgot the reverse
mapping from the port number to the pin NID that is used in the ELD
notifier callback. As a result, it's processed to a wrong widget and
gives a warning like
snd_hda_codec_hdmi hdaudioC0D2: HDMI: pin nid 5 not registered
This patch corrects it with a proper reverse mapping function.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204133 Fixes: b0d8bc50b9f2 ("ALSA: hda: hdmi - add Icelake support") Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
(cherry picked from commit 3140aafb22edeab0cc41f15f53b12a118c0ac215) Signed-off-by: Hui Wang <hui.wang@canonical.com> Acked-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Hui Wang [Fri, 19 Jul 2019 14:39:17 +0000 (22:39 +0800)]
Input: alps - fix a mismatch between a condition check and its comment
BugLink: https://bugs.launchpad.net/bugs/1836752
In the function alps_is_cs19_trackpoint(), we check if the param[1] is
in the 0x20~0x2f range, but the code we wrote for this checking is not
correct:
(param[1] & 0x20) does not mean param[1] is in the range of 0x20~0x2f,
it also means the param[1] is in the range of 0x30~0x3f, 0x60~0x6f...
Now fix it with a new condition checking ((param[1] & 0xf0) == 0x20).
BugLink: https://bugs.launchpad.net/bugs/1836752
On a latest Lenovo laptop, the trackpoint and 3 buttons below it
don't work at all, when we move the trackpoint or press those 3
buttons, the kernel will print out:
"Rejected trackstick packet from non DualPoint device"
This device is identified as an alps touchpad but the packet has
trackpoint format, so the alps.c drops the packet and prints out
the message above.
According to XiaoXiao's explanation, this device is named cs19 and
is trackpoint-only device, its firmware is only for trackpoint, it
is independent of touchpad and is a device completely different from
DualPoint ones.
To drive this device with mininal changes to the existing driver, we
just let the alps driver not handle this device, then the trackpoint.c
will be the driver of this device if the trackpoint driver is enabled.
(if not, this device will fallback to a bare PS/2 device)
With the trackpoint.c, this trackpoint and 3 buttons all work well,
they have all features that the trackpoint should have, like
scrolling-screen, drag-and-drop and frame-selection.
Signed-off-by: XiaoXiao Liu <sliuuxiaonxiao@gmail.com> Signed-off-by: Hui Wang <hui.wang@canonical.com> Reviewed-by: Pali Rohár <pali.rohar@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
(cherry picked from commit 7e4935ccc3236751e5fe4bd6846f86e46bb2e427) Signed-off-by: Hui Wang <hui.wang@canonical.com> Acked-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
s390: add alignment hints to vector load and store
BugLink: https://bugs.launchpad.net/bugs/1836857
The z14 introduced alignment hints to increase the performance of
vector loads and stores. The kernel uses an implicit alignmenet
of 8 bytes for the vector registers, set the alignment hint to 3.
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
(cherry picked from commit 142c52d7bce45d335f48d53fdbf428bb15cf3924) Signed-off-by: Frank Heimes <frank.heimes@canonical.com> Acked-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
BugLink: http://bugs.launchpad.net/bugs/1835001
Right now we are aware of two cases that needs another hotplug retry:
- Unpowered type-c dongles
- HDMI slow unplug
Both have a complete explanation in the code to schedule another run
of the hotplug handler.
It could have more checks to just trigger the retry in those two
specific cases but why would sink signal a long pulse if there is
no change? Also the drawback of running the hotplug handler again
is really low and that could fix another cases that we are not
aware.
Also retrying for old DP ports(non-DDI) to make it consistent and not
cause CI failures if those systems are connected to chamelium boards
that will be used to simulate the issues reported in here.
v2: Also retrying for old DP ports(non-DDI)(Imre)
v4: Renamed INTEL_HOTPLUG_NOCHANGE to INTEL_HOTPLUG_UNCHANGED to keep
it consistent(Rodrigo)
Tested-by: Timo Aaltonen <tjaalton@ubuntu.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190712005343.24571-2-jose.souza@intel.com
(backported from commit bb80c9255770fa1ed54e889a6bee628bdd0f6762
git://anongit.freedesktop.org/drm-intel) Signed-off-by: You-Sheng Yang <vicamo.yang@canonical.com> Acked-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Imre Deak [Tue, 23 Jul 2019 07:39:27 +0000 (15:39 +0800)]
drm/i915: Add support for retrying hotplug
BugLink: http://bugs.launchpad.net/bugs/1835001
There is some scenarios that we are aware that sink probe can fail,
so lets add the infrastructure to let hotplug() hook to request
another probe after some time.
v2: Handle shared HPD pins (Imre)
v3: Rebased
v4: Renamed INTEL_HOTPLUG_NOCHANGE to INTEL_HOTPLUG_UNCHANGED to keep
it consistent(Rodrigo)
v5: Making the working queue used explicit through all the callers to
hotplug_work (Ville)
Tested-by: Timo Aaltonen <tjaalton@ubuntu.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190712005343.24571-1-jose.souza@intel.com
(backported from commit 3944709df8e9298225fc2b29e53ee8e6f4b26618
git://anongit.freedesktop.org/drm-intel) Signed-off-by: You-Sheng Yang <vicamo.yang@canonical.com> Acked-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Thomas Richter [Wed, 24 Jul 2019 16:30:35 +0000 (18:30 +0200)]
s390/cpumf: Add extended counter set definitions for model 8561 and 8562
BugLink: https://bugs.launchpad.net/bugs/1836860
Add the extended counter set definitions for s390 machine types
8561 and 8262. They are identical with machine types 3906 and
3907.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
(cherry picked from commit 820bace734722715c643dcb5f74b502cb912d4eb) Signed-off-by: Frank Heimes <frank.heimes@canonical.com> Acked-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Thomas Richter [Wed, 24 Jul 2019 16:30:34 +0000 (18:30 +0200)]
s390/cpum_cf: Add support for CPU-MF SVN 6
BugLink: https://bugs.launchpad.net/bugs/1836860
Add support for the CPU-Measurement Facility counter
second version number 6. This number is used to detect some
more counters in the crypto counter set and the extended
counter set.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
(cherry picked from commit 46a984ffb86c8542fa510656fa8cb33befe8ee8f) Signed-off-by: Frank Heimes <frank.heimes@canonical.com> Acked-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Hans de Goede [Thu, 25 Jul 2019 07:19:10 +0000 (15:19 +0800)]
platform/x86: asus-wmi: Only Tell EC the OS will handle display hotkeys from asus_nb_wmi
BugLink: https://bugs.launchpad.net/bugs/1837117
Commit 78f3ac76d9e5 ("platform/x86: asus-wmi: Tell the EC the OS will
handle the display off hotkey") causes the backlight to be permanently off
on various EeePC laptop models using the eeepc-wmi driver (Asus EeePC
1015BX, Asus EeePC 1025C).
The asus_wmi_set_devstate(ASUS_WMI_DEVID_BACKLIGHT, 2, NULL) call added
by that commit is made conditional in this commit and only enabled in
the quirk_entry structs in the asus-nb-wmi driver fixing the broken
display / backlight on various EeePC laptop models.
Cc: João Paulo Rechi Vita <jprvita@endlessm.com> Fixes: 78f3ac76d9e5 ("platform/x86: asus-wmi: Tell the EC the OS will handle the display off hotkey") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
(cherry picked from commit 1dd93f873d8ed8e5b228d1ae324b1f3c1e94bfa8) Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com> Acked-by: Connor Kuehl <connor.kuehl@canonical.com> Acked-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
When unregister_net_sysctl_table() is called the ctl_hdr pointer will
obviously be freed and so accessing it righter after is invalid. Fix
this by stashing a pointer to the table we want to free before we
unregister the sysctl header.
Note that syzkaller falsely chased this down to the drm tree so the
Fixes tag that syzkaller requested would be wrong. This commit uses a
different but the correct Fixes tag.
/* Splat */
BUG: KASAN: use-after-free in br_netfilter_sysctl_exit_net
net/bridge/br_netfilter_hooks.c:1121 [inline]
BUG: KASAN: use-after-free in brnf_exit_net+0x38c/0x3a0
net/bridge/br_netfilter_hooks.c:1141
Read of size 8 at addr ffff8880a4078d60 by task kworker/u4:4/8749
Memory state around the buggy address: ffff8880a4078c00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8880a4078c80: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
> ffff8880a4078d00: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
^ ffff8880a4078d80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8880a4078e00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
Reported-by: syzbot+43a3fa52c0d9c5c94f41@syzkaller.appspotmail.com Fixes: 22567590b2e6 ("netfilter: bridge: namespace bridge netfilter sysctls") Signed-off-by: Christian Brauner <christian@brauner.io> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
(cherry picked from commit 7e6daf50e1f4ea0ecd56406beb64ffc66e1e94db) Signed-off-by: Connor Kuehl <connor.kuehl@canonical.com> Acked-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/1836910
Currently, the /proc/sys/net/bridge folder is only created in the initial
network namespace. This patch ensures that the /proc/sys/net/bridge folder
is available in each network namespace if the module is loaded and
disappears from all network namespaces when the module is unloaded.
apply per network namespace. This unblocks some use-cases where users would
like to e.g. not do bridge filtering for bridges in a specific network
namespace while doing so for bridges located in another network namespace.
The netfilter rules are afaict already per network namespace so it should
be safe for users to specify whether bridge devices inside a network
namespace are supposed to go through iptables et al. or not. Also, this can
already be done per-bridge by setting an option for each individual bridge
via Netlink. It should also be possible to do this for all bridges in a
network namespace via sysctls.
Cc: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
(cherry picked from commit 22567590b2e634247931b3d2351384ba45720ebe) Signed-off-by: Connor Kuehl <connor.kuehl@canonical.com> Acked-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/1837136
When the ideapad-laptop driver was first written it was written for laptops
which had a hardware rfkill switch. So when the first ideapad laptops
showed up without a hw rfkill switch and it turned out that in this case
the ideapad firmware interface would always report the wifi being hardware-
blocked, a DMI id list of models which lack a hw rfkill switch was started
(by yours truly). Things were done this way to avoid regressing existing
models with a hw rfkill switch. In hindsight this was a mistake.
Lenovo releases a lot of ideapad models every year and even the latest
models still use the "VPC2004" ACPI interface the ideapad-laptop driver
binds to. Having a hw rfkill switch is quite rare on modern hardware, so
all these new models need to be added to the no_hw_rfkill_list, leading
to a never ending game of whack a mole.
Worse the failure mode when not present on the list, is very bad. In this
case the ideapad-laptop driver will report the wifi as being hw-blocked,
at which points NetworkManager does not even try to use it and the user
ends up with non working wifi.
This leads to various Linux fora on the internet being filled with
wifi not working on ideapad laptops stories, which does not make Linux
look good.
The failure mode when we flip the default to assuming that a hw rfkill
switch is not present OTOH is quite benign. When we properly report the
wifi as being hw-blocked on ideapads which do have the hw-switch; and it
is in the wifi-off position, then at least when using NetworkManager +
GNOME3 the user will get a "wifi disabled in hardware" message when trying
to connect to the wifi from the UI. If OTOH we assume there is no hardware
rfkill switch, then the user will get an empty list for the list of
available networks. Although the empty list vs the "wifi disabled in
hardware" message is a regression, it is a very minor regression and it
can easily be fixed on a model by model basis by filling the new
hw_rfkill_list this commit introduces.
Therefor this commit removes the ever growing no_hw_rfkill_list, flipping
the default to assuming there is no hw rfkill switch and adding a new
hw_rfkill_list. Thereby fixing the wifi not working on all the current
ideapad and yoga models which are not on the list yet and also fixing it
for all future ideapad and yoga models using the "VPC2004" ACPI interface.
Note once this patch has been accepted upstream. I plan to write a blog
post asking for users of ideapads and yoga's with a hw rfkill switch to
step forward, so that we can populate the new hw_rfkill_list with the few
older yoga and ideapad models which actually have a hw rfkill switch.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1703338 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
(backported from commit 5105e78e5b2414ec39efaadca1802e37e7105bb1) Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Acked-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Currently it is not possible to use overlayfs on top of shiftfs. This
means Docker inside of LXD cannot make user of the overlay2 graph driver
which is blocking users such as Travis from making use of it
efficiently.
Coly Li [Wed, 7 Aug 2019 12:46:16 +0000 (14:46 +0200)]
bcache: improve bcache_reboot()
BugLink: https://bugs.launchpad.net/bugs/1784665
This patch tries to release mutex bch_register_lock early, to give
chance to stop cache set and bcache device early.
This patch also expends time out of stopping all bcache device from
2 seconds to 10 seconds, because stopping writeback rate update worker
may delay for 5 seconds, 2 seconds is not enough.
After this patch applied, stopping bcache devices during system reboot
or shutdown is very hard to be observed any more.
Signed-off-by: Coly Li <colyli@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
(cherry picked from commit eb8cbb6df38f6e5124a3d5f1f8a3dbf519537c60) Signed-off-by: Andrea Righi <andrea.righi@canonical.com> Acked-by: Kleber Souza <kleber.souza@canonical.com> Acked-by: Stefan Bader <stefan.bader@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
We have observed it where both:
1) LVM/devmapper is involved (bcache backing device is LVM volume) and
2) writeback cache is involved (bcache cache_mode is writeback)
On one machine, we can reliably reproduce it with:
# echo writeback > /sys/block/bcache0/bcache/cache_mode
(not sure whether above line is required)
# mount /dev/bcache0 /test
# for i in {0..10}; do
file="$(mktemp /test/zero.XXX)"
dd if=/dev/zero of="$file" bs=1M count=256
sync
rm $file
done
# fstrim -v /test
Observing this with tracepoints on, we see the following writes:
Note the final one has different hit/bypass flags.
This is because in should_writeback(), we were hitting a case where
the partial stripe condition was returning true and so
should_writeback() was returning true early.
If that hadn't been the case, it would have hit the would_skip test, and
as would_skip == s->iop.bypass == true, should_writeback() would have
returned false.
Looking at the git history from 'commit 72c270612bd3 ("bcache: Write out
full stripes")', it looks like the idea was to optimise for raid5/6:
* If a stripe is already dirty, force writes to that stripe to
writeback mode - to help build up full stripes of dirty data
To fix this issue, make sure that should_writeback() on a discard op
never returns true.
More details of debugging:
https://www.spinics.net/lists/linux-bcache/msg06996.html
Nicolin Chen [Thu, 8 Aug 2019 00:43:14 +0000 (18:43 -0600)]
dma-contiguous: page-align the size in dma_free_contiguous()
BugLink: https://bugs.launchpad.net/bugs/1839395
According to the original dma_direct_alloc_pages() code:
{
unsigned int count = PAGE_ALIGN(size) >> PAGE_SHIFT;
if (!dma_release_from_contiguous(dev, page, count))
__free_pages(page, get_order(size));
}
The count parameter for dma_release_from_contiguous() was page
aligned before the right-shifting operation, while the new API
dma_free_contiguous() forgets to have PAGE_ALIGN() at the size.
So this patch simply adds it to prevent any corner case.
Fixes: fdaeec198ada ("dma-contiguous: add dma_{alloc,free}_contiguous() helpers") Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
(cherry picked from commit f46cc0152501e46d1b3aa5e7eade61145070eab0) Signed-off-by: dann frazier <dann.frazier@canonical.com> Acked-by: Kleber Souza <kleber.souza@canonical.com> Acked-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Nicolin Chen [Thu, 8 Aug 2019 00:43:13 +0000 (18:43 -0600)]
dma-contiguous: do not overwrite align in dma_alloc_contiguous()
BugLink: https://bugs.launchpad.net/bugs/1839395
The dma_alloc_contiguous() limits align at CONFIG_CMA_ALIGNMENT for
cma_alloc() however it does not restore it for the fallback routine.
This will result in a size mismatch between the allocation and free
when running into the fallback routines after cma_alloc() fails, if
the align is larger than CONFIG_CMA_ALIGNMENT.
This patch adds a cma_align to take care of cma_alloc() and prevent
the align from being overwritten.
Jason Wang [Thu, 8 Aug 2019 04:43:35 +0000 (04:43 +0000)]
vhost: scsi: add weight support
This patch will check the weight and exit the loop if we exceeds the
weight. This is useful for preventing scsi kthread from hogging cpu
which is guest triggerable.
This addresses CVE-2019-3900.
Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Fixes: 057cbf49a1f0 ("tcm_vhost: Initial merge for vhost level target fabric driver") Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
CVE-2019-3900
Jason Wang [Thu, 8 Aug 2019 04:43:34 +0000 (04:43 +0000)]
vhost: vsock: add weight support
This patch will check the weight and exit the loop if we exceeds the
weight. This is useful for preventing vsock kthread from hogging cpu
which is guest triggerable. The weight can help to avoid starving the
request from on direction while another direction is being processed.
The value of weight is picked from vhost-net.
This addresses CVE-2019-3900.
Cc: Stefan Hajnoczi <stefanha@redhat.com> Fixes: 433fc58e6bf2 ("VSOCK: Introduce vhost_vsock.ko") Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
CVE-2019-3900
Jason Wang [Thu, 8 Aug 2019 04:43:33 +0000 (04:43 +0000)]
vhost_net: fix possible infinite loop
When the rx buffer is too small for a packet, we will discard the vq
descriptor and retry it for the next packet:
while ((sock_len = vhost_net_rx_peek_head_len(net, sock->sk,
&busyloop_intr))) {
...
/* On overrun, truncate and discard */
if (unlikely(headcount > UIO_MAXIOV)) {
iov_iter_init(&msg.msg_iter, READ, vq->iov, 1, 1);
err = sock->ops->recvmsg(sock, &msg,
1, MSG_DONTWAIT | MSG_TRUNC);
pr_debug("Discarded rx packet: len %zd\n", sock_len);
continue;
}
...
}
This makes it possible to trigger a infinite while..continue loop
through the co-opreation of two VMs like:
1) Malicious VM1 allocate 1 byte rx buffer and try to slow down the
vhost process as much as possible e.g using indirect descriptors or
other.
2) Malicious VM2 generate packets to VM1 as fast as possible
Fixing this by checking against weight at the end of RX and TX
loop. This also eliminate other similar cases when:
- userspace is consuming the packets in the meanwhile
- theoretical TOCTOU attack if guest moving avail index back and forth
to hit the continue after vhost find guest just add new buffers
This addresses CVE-2019-3900.
Fixes: d8316f3991d20 ("vhost: fix total length when packets are too short") Fixes: 3a4d5c94e9593 ("vhost_net: a kernel-level virtio server") Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
CVE-2019-3900
Jason Wang [Thu, 8 Aug 2019 04:43:32 +0000 (04:43 +0000)]
vhost: introduce vhost_exceeds_weight()
We used to have vhost_exceeds_weight() for vhost-net to:
- prevent vhost kthread from hogging the cpu
- balance the time spent between TX and RX
This function could be useful for vsock and scsi as well. So move it
to vhost.c. Device must specify a weight which counts the number of
requests, or it can also specific a byte_weight which counts the
number of bytes that has been processed.
Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
CVE-2019-3900
Error message printed:
modprobe: ERROR: could not insert 'tipc': Address family not
supported by protocol.
when modprobe tipc after the following patch: switch order of
device registration, commit 7e27e8d6130c
("tipc: switch order of device registration to fix a crash")
Because sock_create_kern(net, AF_TIPC, ...) called by
tipc_topsrv_create_listener() in the initialization process
of tipc_init_net(), so tipc_socket_init() must be execute before that.
Meanwhile, tipc_net_id need to be initialized when sock_create()
called, and tipc_socket_init() is no need to be called for each namespace.
I add a variable tipc_topsrv_net_ops, and split the
register_pernet_subsys() of tipc into two parts, and split
tipc_socket_init() with initialization of pernet params.
By the way, I fixed resources rollback error when tipc_bcast_init()
failed in tipc_init_net().
Fixes: 7e27e8d6130c ("tipc: switch order of device registration to fix a crash") Signed-off-by: Junwei Hu <hujunwei4@huawei.com> Reported-by: Wang Wang <wangwang2@huawei.com> Reported-by: syzbot+1e8114b61079bfe9cbc5@syzkaller.appspotmail.com Reviewed-by: Kang Zhou <zhoukang7@huawei.com> Reviewed-by: Suanming Mou <mousuanming@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
There is no need for this at all. Worst it means that if
the guest tries to write to BARs it could lead (on certain
platforms) to PCI SERR errors.
Please note that with af6fc858a35b90e89ea7a7ee58e66628c55c776b
"xen-pciback: limit guest control of command register"
a guest is still allowed to enable those control bits (safely), but
is not allowed to disable them and that therefore a well behaved
frontend which enables things before using them will still
function correctly.
This is done via an write to the configuration register 0x4 which
triggers on the backend side:
command_write
\- pci_enable_device
\- pci_enable_device_flags
\- do_pci_enable_device
\- pcibios_enable_device
\-pci_enable_resourcess
[which enables the PCI_COMMAND_MEMORY|PCI_COMMAND_IO]
However guests (and drivers) which don't do this could cause
problems, including the security issues which XSA-120 sought
to address.
Reported-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Juergen Gross <jgross@suse.com> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
VMX ghash was using a fallback that did not support interleaving simd
and nosimd operations, leading to failures in the extended test suite.
If I understood correctly, Eric's suggestion was to use the same
data format that the generic code uses, allowing us to call into it
with the same contexts. I wasn't able to get that to work - I think
there's a very different key structure and data layout being used.
So instead steal the arm64 approach and perform the fallback
operations directly if required.
Fixes: cc333cd68dfa ("crypto: vmx - Adding GHASH routines for VMX module") Cc: stable@vger.kernel.org # v4.1+ Reported-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Daniel Axtens <dja@axtens.net> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
TCP zerocopy takes a uarg reference for every skb, plus one for the
tcp_sendmsg_locked datapath temporarily, to avoid reaching refcnt zero
as it builds, sends and frees skbs inside its inner loop.
UDP and RAW zerocopy do not send inside the inner loop so do not need
the extra sock_zerocopy_get + sock_zerocopy_put pair. Commit 52900d22288ed ("udp: elide zerocopy operation in hot path") introduced
extra_uref to pass the initial reference taken in sock_zerocopy_alloc
to the first generated skb.
But, sock_zerocopy_realloc takes this extra reference at the start of
every call. With MSG_MORE, no new skb may be generated to attach the
extra_uref to, so refcnt is incorrectly 2 with only one skb.
Do not take the extra ref if uarg && !tcp, which implies MSG_MORE.
Update extra_uref accordingly.
This conditional assignment triggers a false positive may be used
uninitialized warning, so have to initialize extra_uref at define.
Changes v1->v2: fix typo in Fixes SHA1
Fixes: 52900d22288e7 ("udp: elide zerocopy operation in hot path") Reported-by: syzbot <syzkaller@googlegroups.com> Diagnosed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
This reverts commit 2391b0030e241386d710df10e53e2cfc3c5d4fc1 which has
introduced regression. Now SGE's BAR2 Doorbell/GTS Page Size is
interpreted correctly in the firmware itself by using actual host
page size. Hence previous commit needs to be reverted.
Signed-off-by: Vishal Kulkarni <vishal@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
On device surprise removal path (the notifier) we can't
bail just because the features are disabled. They may
have been enabled during the lifetime of the device.
This bug leads to leaking netdev references and
use-after-frees if there are active connections while
device features are cleared.
Fixes: e8f69799810c ("net/tls: Add generic NIC offload infrastructure") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
TLS offload drivers shouldn't (and currently don't) block
the TLS offload feature changes based on whether there are
active offloaded connections or not.
This seems to be a good idea, because we want the admin to
be able to disable the TLS offload at any time, and there
is no clean way of disabling it for active connections
(TX side is quite problematic). So if features are cleared
existing connections will stay offloaded until they close,
and new connections will not attempt offload to a given
device.
However, the offload state removal handling is currently
broken if feature flags get cleared while there are
active TLS offloads.
RX side will completely bail from cleanup, even on normal
remove path, leaving device state dangling, potentially
causing issues when the 5-tuple is reused. It will also
fail to release the netdev reference.
Remove the RX-side warning message, in next release cycle
it should be printed when features are disabled, rather
than when connection dies, but for that we need a more
efficient method of finding connection of a given netdev
(a'la BPF offload code).
Fixes: 4799ac81e52a ("tls: Add rx inline crypto offload") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Skip RDMA context memory allocations, reduce to 1 ring, and disable
TPA when running in the kdump kernel. Without this patch, the driver
fails to initialize with memory allocation errors when running in a
typical kdump kernel.
Fixes: cf6daed098d1 ("bnxt_en: Increase context memory allocations on 57500 chips for RDMA.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
When making configuration changes, the driver calls bnxt_close_nic()
and then bnxt_open_nic() for the changes to take effect. A parameter
irq_re_init is passed to the call sequence to indicate if IRQ
should be re-initialized. This irq_re_init parameter needs to
be included in the bnxt_reserve_rings() call. bnxt_reserve_rings()
can only call pci_disable_msix() if the irq_re_init parameter is
true, otherwise it may hit BUG() because some IRQs may not have been
freed yet.
Fixes: 41e8d7983752 ("bnxt_en: Modify the ring reservation functions for 57500 series chips.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
For every RX packet, the driver replenishes all buffers used for that
packet and puts them back into the RX ring and RX aggregation ring.
In one code path where the RX packet has one RX buffer and one or more
aggregation buffers, we missed recycling the aggregation buffer(s) if
we are unable to allocate a new SKB buffer. This leads to the
aggregation ring slowly running out of buffers over time. Fix it
by properly recycling the aggregation buffers.
Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Reported-by: Rakesh Hemnani <rhemnani@fb.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Weifeng Voon [Tue, 21 May 2019 05:38:38 +0000 (13:38 +0800)]
net: stmmac: dma channel control register need to be init first
BugLink: https://bugs.launchpad.net/bugs/1837518
stmmac_init_chan() needs to be called before stmmac_init_rx_chan() and
stmmac_init_tx_chan(). This is because if PBLx8 is to be used,
"DMA_CH(#i)_Control.PBLx8" needs to be set before programming
"DMA_CH(#i)_TX_Control.TxPBL" and "DMA_CH(#i)_RX_Control.RxPBL".
Fixes: 47f2a9ce527a ("net: stmmac: dma channel init prepared for multiple queues") Reviewed-by: Zhang, Baoli <baoli.zhang@intel.com> Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: Weifeng Voon <weifeng.voon@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Tan, Tee Min [Tue, 21 May 2019 04:55:42 +0000 (12:55 +0800)]
net: stmmac: fix ethtool flow control not able to get/set
BugLink: https://bugs.launchpad.net/bugs/1837518
Currently ethtool was not able to get/set the flow control due to a
missing "!". It will always return -EOPNOTSUPP even the device is
flow control supported.
This patch fixes the condition check for ethtool flow control get/set
function for ETHTOOL_LINK_MODE_Asym_Pause_BIT.
Fixes: 3c1bcc8614db (“net: ethernet: Convert phydev advertize and supported from u32 to link mode”) Signed-off-by: Tan, Tee Min <tee.min.tan@intel.com> Reviewed-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: Voon, Weifeng <weifeng.voon@intel.com@intel.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
When CQE compression is enabled (Multi-host systems), compressed CQEs
might arrive to the driver rx, compressed CQEs don't have a valid hash
offload and the driver already reports a hash value of 0 and invalid hash
type on the skb for compressed CQEs, but this is not good enough.
On a congested PCIe, where CQE compression will kick in aggressively,
gro will deliver lots of out of order packets due to the invalid hash
and this might cause a serious performance drop.
The only valid solution, is to disable rxhash offload at all when CQE
compression is favorable (Multi-host systems).
root ns is yet another fs core node which is freed using kfree() by
tree_put_node().
Rest of the other fs core objects are also allocated using kmalloc
variants.
However, root ns memory is allocated using kvzalloc().
Hence allocate root ns memory using kzalloc().
Fixes: 2530236303d9e ("net/mlx5_core: Flow steering tree initialization") Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Chris Packham [Mon, 20 May 2019 03:45:36 +0000 (15:45 +1200)]
tipc: Avoid copying bytes beyond the supplied data
BugLink: https://bugs.launchpad.net/bugs/1837518
TLV_SET is called with a data pointer and a len parameter that tells us
how many bytes are pointed to by data. When invoking memcpy() we need
to careful to only copy len bytes.
Previously we would copy TLV_LENGTH(len) bytes which would copy an extra
4 bytes past the end of the data pointer which newer GCC versions
complain about.
In file included from test.c:17:
In function 'TLV_SET',
inlined from 'test' at test.c:186:5:
/usr/include/linux/tipc_config.h:317:3:
warning: 'memcpy' forming offset [33, 36] is out of the bounds [0, 32]
of object 'bearer_name' with type 'char[32]' [-Warray-bounds]
memcpy(TLV_DATA(tlv_ptr), data, tlv_len);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
test.c: In function 'test':
test.c::161:10: note:
'bearer_name' declared here
char bearer_name[TIPC_MAX_BEARER_NAME];
^~~~~~~~~~~
We still want to ensure any padding bytes at the end are initialised, do
this with a explicit memset() rather than copy bytes past the end of
data. Apply the same logic to TCM_SET.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The crash happens roughly 125..130ms after the disconnect. This
correlates with the 'delay' timer that is started on certain USB tx/rx
errors in the URB completion handler.
The problem is a race of usbnet_stop() with usbnet_start_xmit(). In
usbnet_stop() we call usbnet_terminate_urbs() to cancel all URBs in
flight. This only makes sense if no new URBs are submitted
concurrently, though. But the usbnet_start_xmit() can run at the same
time on another CPU which almost unconditionally submits an URB. The
error callback of the new URB will then schedule the timer after it was
already stopped.
The fix adds a check if the tx queue is stopped after the tx list lock
has been taken. This should reliably prevent the submission of new URBs
while usbnet_terminate_urbs() does its job. The same thing is done on
the rx side even though it might be safe due to other flags that are
checked there.
Signed-off-by: Jan Klötzke <Jan.Kloetzke@preh.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
(At least) RTL8168e forgets its MAC address in PCI D3. To fix this set
the MAC address when resuming. For resuming from runtime-suspend we
had this in place already, for resuming from S3/S5 it was missing.
The commit referenced as being fixed isn't wrong, it's just the first
one where the patch applies cleanly.
Fixes: 0f07bd850d36 ("r8169: use dev_get_drvdata where possible") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reported-by: Albert Astals Cid <aacid@kde.org> Tested-by: Albert Astals Cid <aacid@kde.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Commit 984203ceff27 ("net: stmmac: mdio: remove reset gpio free")
removed the reset gpio free, when the driver is unbinded or rmmod,
we miss the gpio free.
This patch uses managed API to request the reset gpio, so that the
gpio could be freed properly.
Fixes: 984203ceff27 ("net: stmmac: mdio: remove reset gpio free") Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Function tcf_action_dump() relies on tc_action->order field when starting
nested nla to send action data to userspace. This approach breaks in
several cases:
- When multiple filters point to same shared action, tc_action->order field
is overwritten each time it is attached to filter. This causes filter
dump to output action with incorrect attribute for all filters that have
the action in different position (different order) from the last set
tc_action->order value.
- When action data is displayed using tc action API (RTM_GETACTION), action
order is overwritten by tca_action_gd() according to its position in
resulting array of nl attributes, which will break filter dump for all
filters attached to that shared action that expect it to have different
order value.
Don't rely on tc_action->order when dumping actions. Set nla according to
action position in resulting array of actions instead.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Some boards do not have the PHY firmware programmed in the 3310's flash,
which leads to the PHY not working as expected. Warn the user when the
PHY fails to boot the firmware and refuse to initialise.
Fixes: 20b2af32ff3f ("net: phy: add Marvell Alaska X 88X3310 10Gigabit PHY support") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
MVPP2_TXQ_SCHED_TOKEN_CNTR_REG() expects the logical queue id but
the current code is passing the global tx queue offset, so it ends
up writing to unknown registers (between 0x8280 and 0x82fc, which
seemed to be unused by the hardware). This fixes the issue by using
the logical queue id instead.
Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit") Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Fix below issues in err code path of probe:
1. we don't need to unregister_netdev() because the netdev isn't
registered.
2. when register_netdev() fails, we also need to destroy bm pool for
HWBM case.
Fixes: dc35a10f68d3 ("net: mvneta: bm: add support for hardware buffer management") Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
If a network driver provides to napi_gro_frags() an
skb with a page fragment of exactly 14 bytes, the call
to gro_pull_from_frag0() will 'consume' the fragment
by calling skb_frag_unref(skb, 0), and the page might
be freed and reused.
Reading eth->h_proto at the end of napi_frags_skb() might
read mangled data, or crash under specific debugging features.
BUG: KASAN: use-after-free in napi_frags_skb net/core/dev.c:5833 [inline]
BUG: KASAN: use-after-free in napi_gro_frags+0xc6f/0xd10 net/core/dev.c:5841
Read of size 2 at addr ffff88809366840c by task syz-executor599/8957
Fix the clk mismatch in the error path "failed_reset" because
below error path will disable clk_ahb and clk_ipg directly, it
should use pm_runtime_put_noidle() instead of pm_runtime_put()
to avoid to call runtime resume callback.
Reported-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Tested-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
When identical rules are inserted, the latter one goes to C-TCAM. For
that, a second eRP with the same mask is created. These 2 eRPs by the
nature cannot be merged and also one cannot be parent of another.
Teach mlxsw_sp_acl_erp_delta_fill() about this possibility and handle it
gracefully.
Reported-by: Alex Kushnarov <alexanderk@mellanox.com> Fixes: c22291f7cf45 ("mlxsw: spectrum: acl: Implement delta for ERP") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
IPv6 redirect is broken for VRF. __ip6_route_redirect walks the FIB
entries looking for an exact match on ifindex. With VRF the flowi6_oif
is updated by l3mdev_update_flow to the l3mdev index and the
FLOWI_FLAG_SKIP_NH_OIF set in the flags to tell the lookup to skip the
device match. For redirects the device match is requires so use that
flag to know when the oif needs to be reset to the skb device index.
Fixes: ca254490c8df ("net: Add VRF support to IPv6 stack") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
IPv6 does not consider if the socket is bound to a device when binding
to an address. The result is that a socket can be bound to eth0 and
then bound to the address of eth1. If the device is a VRF, the result
is that a socket can only be bound to an address in the default VRF.
Resolve by considering the device if sk_bound_dev_if is set.
Signed-off-by: Mike Manning <mmanning@vyatta.att-mail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Tested-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
ip_sf_list_clear_all() needs to be defined even if !CONFIG_IP_MULTICAST
Fixes: 3580d04aa674 ("ipv4/igmp: fix another memory leak in igmpv3_del_delrec()") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
According to Amit Klein and Benny Pinkas, IP ID generation is too weak
and might be used by attackers.
Even with recent net_hash_mix() fix (netns: provide pure entropy for net_hash_mix())
having 64bit key and Jenkins hash is risky.
It is time to switch to siphash and its 128bit keys.
Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Amit Klein <aksecurity@gmail.com> Reported-by: Benny Pinkas <benny@pinkas.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
VLAN flows never get offloaded unless ivlan_vld is set in filter spec.
It's not compulsory for vlan_ethtype to be set.
So, always enable ivlan_vld bit for offloading VLAN flows regardless of
vlan_ethtype is set or not.
Fixes: ad9af3e09c (cxgb4: add tc flower match support for vlan) Signed-off-by: Raju Rangoju <rajur@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Once in a while, with just the right timing, 802.3ad slaves will fail to
properly initialize, winding up in a weird state, with a partner system
mac address of 00:00:00:00:00:00. This started happening after a fix to
properly track link_failure_count tracking, where an 802.3ad slave that
reported itself as link up in the miimon code, but wasn't able to get a
valid speed/duplex, started getting set to BOND_LINK_FAIL instead of
BOND_LINK_DOWN. That was the proper thing to do for the general "my link
went down" case, but has created a link initialization race that can put
the interface in this odd state.
The simple fix is to instead set the slave link to BOND_LINK_DOWN again,
if the link has never been up (last_link_up == 0), so the link state
doesn't bounce from BOND_LINK_DOWN to BOND_LINK_FAIL -- it hasn't failed
in this case, it simply hasn't been up yet, and this prevents the
unnecessary state change from DOWN to FAIL and getting stuck in an init
failure w/o a partner mac.
Fixes: ea53abfab960 ("bonding/802.3ad: fix link_failure_count tracking") CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: "David S. Miller" <davem@davemloft.net> CC: netdev@vger.kernel.org Tested-by: Heesoon Kim <Heesoon.Kim@stratus.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Currently we check if the __ICE_PREPARED_FOR_RESET bit is set prior to
calling ice_prepare_for_reset in ice_reset_subtask(), but we aren't
checking that bit in ice_do_reset() before calling
ice_prepare_for_reset(). This is not consistent and can cause issues if
ice_prepare_for_reset() is called prior to ice_do_reset(). Fix this by
checking if the __ICE_PREPARED_FOR_RESET bit is set internal to
ice_prepare_for_reset().
Signed-off-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The quiesce function calls cio_cancel_halt_clear() and if we
get an -EBUSY we go into a loop where we:
- wait for any interrupts
- flush all I/O in the workqueue
- retry cio_cancel_halt_clear
During the period where we are waiting for interrupts or
flushing all I/O, the channel subsystem could have completed
a halt/clear action and turned off the corresponding activity
control bits in the subchannel status word. This means the next
time we call cio_cancel_halt_clear(), we will again start by
calling cancel subchannel and so we can be stuck between calling
cancel and halt forever.
Rather than calling cio_cancel_halt_clear() immediately after
waiting, let's try to disable the subchannel. If we succeed in
disabling the subchannel then we know nothing else can happen
with the device.
Suggested-by: Eric Farman <farman@linux.ibm.com> Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Message-Id: <4d5a4b98ab1b41ac6131b5c36de18b76c5d66898.1555449329.git.alifm@linux.ibm.com> Reviewed-by: Eric Farman <farman@linux.ibm.com> Acked-by: Halil Pasic <pasic@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The current calculation for the video start delay in the current DSI driver
is that it is the total vertical size, minus the front porch and sync length,
plus 1. This equals to the active vertical size plus the back porch plus 1.
That 1 is coming in the Allwinner BSP from an variable that is set to 1.
However, if we look at the Allwinner BSP more closely, and especially in
the "legacy" code for the display (in drivers/video/sunxi/legacy/), we can
see that this variable is actually computed from the porches and the sync
minus 10, clamped between 8 and 100.
This fixes the start delay symptom we've seen on some panels (vblank
timeouts with vertical white stripes at the bottom of the panel).
After an event is sent, we try to copy it into the user buffer of the
first waiter in drm_read() and if the user buffer doesn't have enough
room we put it back onto the list. However, we didn't wake up any
subsequent waiter, so that event may sit on the list until either a new
vblank event is sent or a new waiter appears. Rare, but in the worst
case may lead to a stuck process.
Testcase: igt/drm_read/short-buffer-wakeup Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170804082328.17173-1-chris@chris-wilson.co.uk Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The SND_SOC_DAVINCI_MCASP driver can use either edma or sdma as
a back-end, and it takes the presence of the respective dma engine
drivers in the configuration as an indication to which ones should be
built. However, this is flawed in multiple ways:
- With CONFIG_TI_EDMA=m and CONFIG_SND_SOC_DAVINCI_MCASP=y,
is enabled as =m, and we get a link error:
sound/soc/ti/davinci-mcasp.o: In function `davinci_mcasp_probe':
davinci-mcasp.c:(.text+0x930): undefined reference to `edma_pcm_platform_register'
- When CONFIG_SND_SOC_DAVINCI_MCASP=m has already been selected by
another driver, the same link error appears even if CONFIG_TI_EDMA
is disabled
There are possibly other issues here, but it seems that the only reasonable
solution is to always build both SND_SOC_TI_EDMA_PCM and
SND_SOC_TI_SDMA_PCM as a dependency here. Both are fairly small and
do not have any other compile-time dependencies, so the cost is
very small, and makes the configuration stage much more consistent.
Fixes: f2055e145f29 ("ASoC: ti: Merge davinci and omap directories") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Building with clang shows a variable that is only used by the
suspend/resume functions but defined outside of their #ifdef block:
sound/soc/ti/davinci-mcasp.c:48:12: error: variable 'context_regs' is not needed and will not be emitted
We commonly fix these by marking the PM functions as __maybe_unused,
but here that would grow the davinci_mcasp structure, so instead
add another #ifdef here.
Fixes: 1cc0c054f380 ("ASoC: davinci-mcasp: Convert the context save/restore to use array") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
This fixes a bug for messages containing both zero length and
unidirectional xfers.
The function spi_map_msg will allocate dummy tx and/or rx buffers
for use with unidirectional transfers when the hardware can only do
a bidirectional transfer. That dummy buffer will be used in place
of a NULL buffer even when the xfer length is 0.
Then in the function __spi_map_msg, if he hardware can dma,
the zero length xfer will have spi_map_buf called on the dummy
buffer.
Eventually, __sg_alloc_table is called and returns -EINVAL
because nents == 0.
This fix prevents the error by not using the dummy buffer when
the xfer length is zero.
Signed-off-by: Chris Lesiak <chris.lesiak@licor.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The mutex for the regulator_dev must be controlled by the caller of
the regulator_notifier_call_chain(), as described in the comment
for that function.
Failure to mutex lock and unlock surrounding the notifier call results
in a kernel WARN_ON_ONCE() which will dump a backtrace for the
regulator_notifier_call_chain() when that function call is first made.
The mutex can be controlled using the regulator_lock/unlock() API.
Fixes: f6130be652d0 ("regulator: DA9055 regulator driver") Suggested-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The mutex for the regulator_dev must be controlled by the caller of
the regulator_notifier_call_chain(), as described in the comment
for that function.
Failure to mutex lock and unlock surrounding the notifier call results
in a kernel WARN_ON_ONCE() which will dump a backtrace for the
regulator_notifier_call_chain() when that function call is first made.
The mutex can be controlled using the regulator_lock/unlock() API.
Fixes: 4068e5182ada ("regulator: da9062: DA9062 regulator driver") Suggested-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The mutex for the regulator_dev must be controlled by the caller of
the regulator_notifier_call_chain(), as described in the comment
for that function.
Failure to mutex lock and unlock surrounding the notifier call results
in a kernel WARN_ON_ONCE() which will dump a backtrace for the
regulator_notifier_call_chain() when that function call is first made.
The mutex can be controlled using the regulator_lock/unlock() API.
Fixes: c90456e36d9c ("regulator: pv88090: new regulator driver") Suggested-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The mutex for the regulator_dev must be controlled by the caller of
the regulator_notifier_call_chain(), as described in the comment
for that function.
Failure to mutex lock and unlock surrounding the notifier call results
in a kernel WARN_ON_ONCE() which will dump a backtrace for the
regulator_notifier_call_chain() when that function call is first made.
The mutex can be controlled using the regulator_lock/unlock() API.
Fixes: e4ee831f949a ("regulator: Add WM831x DC-DC buck convertor support") Suggested-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The mutex for the regulator_dev must be controlled by the caller of
the regulator_notifier_call_chain(), as described in the comment
for that function.
Failure to mutex lock and unlock surrounding the notifier call results
in a kernel WARN_ON_ONCE() which will dump a backtrace for the
regulator_notifier_call_chain() when that function call is first made.
The mutex can be controlled using the regulator_lock/unlock() API.
Fixes: 99cf3af5e2d5 ("regulator: pv88080: new regulator driver") Suggested-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The mutex for the regulator_dev must be controlled by the caller of
the regulator_notifier_call_chain(), as described in the comment
for that function.
Failure to mutex lock and unlock surrounding the notifier call results
in a kernel WARN_ON_ONCE() which will dump a backtrace for the
regulator_notifier_call_chain() when that function call is first made.
The mutex can be controlled using the regulator_lock/unlock() API.
Fixes: 69ca3e58d178 ("regulator: da9063: Add Dialog DA9063 voltage regulators support.") Suggested-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The mutex for the regulator_dev must be controlled by the caller of
the regulator_notifier_call_chain(), as described in the comment
for that function.
Failure to mutex lock and unlock surrounding the notifier call results
in a kernel WARN_ON_ONCE() which will dump a backtrace for the
regulator_notifier_call_chain() when that function call is first made.
The mutex can be controlled using the regulator_lock/unlock() API.
Fixes: 1028a37daa14 ("regulator: da9211: new regulator driver") Suggested-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The mutex for the regulator_dev must be controlled by the caller of
the regulator_notifier_call_chain(), as described in the comment
for that function.
Failure to mutex lock and unlock surrounding the notifier call results
in a kernel WARN_ON_ONCE() which will dump a backtrace for the
regulator_notifier_call_chain() when that function call is first made.
The mutex can be controlled using the regulator_lock/unlock() API.
Fixes: b59320cc5a5e ("regulator: lp8755: new driver for LP8755") Suggested-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Commit 71abd29057cb ("spi: imx: Add support for SPI Slave mode") added
an RX FIFO flush before start of a transfer. In slave mode, the master
may have sent more data than expected and this data will still be in the
RX FIFO at the start of the next transfer, and so needs to be flushed.
However, the code to do the flush was accidentally saving this data into
the previous transfer's RX buffer, clobbering the contents of whatever
followed that buffer.
Change it to empty the FIFO and throw away the data. Every one of the
RX functions for the different eCSPI versions and modes reads the RX
FIFO data using the same readl() call, so just use that, rather than
using the spi_imx->rx function pointer and making sure all the different
rx functions have a working "throw away" mode.
There is another issue, which affects master mode when switching from
DMA to PIO. There can be extra data in the RX FIFO which triggers this
flush code, causing memory corruption in the same manner. I don't know
why this data is unexpectedly in the FIFO. It's likely there is a
different bug or erratum responsible for that. But regardless of that,
I think this is proper fix the for bug at hand here.
Fixes: 71abd29057cb ("spi: imx: Add support for SPI Slave mode") Cc: Jiada Wang <jiada_wang@mentor.com> Cc: Fabio Estevam <festevam@gmail.com> Cc: Stefan Agner <stefan@agner.ch> Cc: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Trent Piepho <tpiepho@impinj.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The mutex for the regulator_dev must be controlled by the caller of
the regulator_notifier_call_chain(), as described in the comment
for that function.
Failure to mutex lock and unlock surrounding the notifier call results
in a kernel WARN_ON_ONCE() which will dump a backtrace for the
regulator_notifier_call_chain() when that function call is first made.
The mutex can be controlled using the regulator_lock/unlock() API.
Fixes: f307a7e9b7af ("regulator: pv88060: new regulator driver") Suggested-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The mutex for the regulator_dev must be controlled by the caller of
the regulator_notifier_call_chain(), as described in the comment
for that function.
Failure to mutex lock and unlock surrounding the notifier call results
in a kernel WARN_ON_ONCE() which will dump a backtrace for the
regulator_notifier_call_chain() when that function call is first made.
The mutex can be controlled using the regulator_lock/unlock() API.
Fixes: 3eb2c7ecb7ea ("regulator: Add LTC3589 support") Suggested-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
projects / mirror_ubuntu-disco-kernel.git / log