hw/Makefile.objs

   1 # core qdev-related obj files, also used by *-user:
   2 common-obj-y += qdev.o qdev-properties.o
   3 # irq.o needed for qdev GPIO handling:
   4 common-obj-y += irq.o
   5
   6 ifeq ($(CONFIG_SOFTMMU),y)
   7 common-obj-y += usb/ ide/ pci/
   8 common-obj-y += loader.o
   9 common-obj-$(CONFIG_VIRTIO) += virtio-console.o
  10 common-obj-$(CONFIG_VIRTIO) += virtio-rng.o
  11 common-obj-$(CONFIG_VIRTIO_PCI) += virtio-pci.o
  12 common-obj-$(CONFIG_VIRTIO) += virtio-bus.o
  13 common-obj-y += fw_cfg.o
  14 common-obj-$(CONFIG_PCI) += pci_bridge_dev.o
  15 common-obj-$(CONFIG_PCI) += ioh3420.o xio3130_upstream.o xio3130_downstream.o
  16 common-obj-$(CONFIG_PCI) += i82801b11.o
  17 common-obj-y += watchdog.o
  18 common-obj-$(CONFIG_ISA_MMIO) += isa_mmio.o
  19 common-obj-$(CONFIG_ECC) += ecc.o
  20 common-obj-$(CONFIG_NAND) += nand.o
  21 common-obj-$(CONFIG_PFLASH_CFI01) += pflash_cfi01.o
  22 common-obj-$(CONFIG_PFLASH_CFI02) += pflash_cfi02.o
  23
  24 common-obj-$(CONFIG_M48T59) += m48t59.o
  25 common-obj-$(CONFIG_ESCC) += escc.o
  26 common-obj-$(CONFIG_EMPTY_SLOT) += empty_slot.o
  27
  28 common-obj-$(CONFIG_SERIAL) += serial.o serial-isa.o
  29 common-obj-$(CONFIG_SERIAL_PCI) += serial-pci.o
  30 common-obj-$(CONFIG_PARALLEL) += parallel.o
  31 common-obj-$(CONFIG_I8254) += i8254_common.o i8254.o
  32 common-obj-$(CONFIG_PCSPK) += pcspk.o
  33 common-obj-$(CONFIG_PCKBD) += pckbd.o
  34 common-obj-$(CONFIG_FDC) += fdc.o
  35 common-obj-$(CONFIG_ACPI) += acpi.o acpi_piix4.o acpi_ich9.o smbus_ich9.o
  36 common-obj-$(CONFIG_APM) += pm_smbus.o apm.o
  37 common-obj-$(CONFIG_DMA) += dma.o
  38 common-obj-$(CONFIG_I82374) += i82374.o
  39 common-obj-$(CONFIG_HPET) += hpet.o
  40 common-obj-$(CONFIG_APPLESMC) += applesmc.o
  41 ifeq ($(CONFIG_USB_SMARTCARD),y)
  42 common-obj-y += ccid-card-passthru.o
  43 common-obj-$(CONFIG_SMARTCARD_NSS) += ccid-card-emulated.o
  44 endif
  45 common-obj-$(CONFIG_I8259) += i8259_common.o i8259.o
  46 common-obj-$(CONFIG_SDHCI) += sdhci.o
  47 common-obj-y += pam.o
  48
  49 # PPC devices
  50 common-obj-$(CONFIG_PREP_PCI) += prep_pci.o
  51 common-obj-$(CONFIG_I82378) += i82378.o
  52 common-obj-$(CONFIG_PC87312) += pc87312.o
  53 # Mac shared devices
  54 common-obj-$(CONFIG_MACIO) += macio.o
  55 common-obj-$(CONFIG_CUDA) += cuda.o
  56 common-obj-$(CONFIG_ADB) += adb.o
  57 common-obj-$(CONFIG_MAC_NVRAM) += mac_nvram.o
  58 common-obj-$(CONFIG_MAC_DBDMA) += mac_dbdma.o
  59 # OldWorld PowerMac
  60 common-obj-$(CONFIG_HEATHROW_PIC) += heathrow_pic.o
  61 common-obj-$(CONFIG_GRACKLE_PCI) += grackle_pci.o
  62 # NewWorld PowerMac
  63 common-obj-$(CONFIG_UNIN_PCI) += unin_pci.o
  64 common-obj-$(CONFIG_DEC_PCI) += dec_pci.o
  65 # PowerPC E500 boards
  66 common-obj-$(CONFIG_PPCE500_PCI) += ppce500_pci.o
  67
  68 # MIPS devices
  69 common-obj-$(CONFIG_PIIX4) += piix4.o
  70 common-obj-$(CONFIG_G364FB) += g364fb.o
  71 common-obj-$(CONFIG_JAZZ_LED) += jazz_led.o
  72
  73 # Xilinx devices
  74 common-obj-$(CONFIG_XILINX) += xilinx_intc.o
  75 common-obj-$(CONFIG_XILINX) += xilinx_timer.o
  76 common-obj-$(CONFIG_XILINX) += xilinx_uartlite.o
  77 common-obj-$(CONFIG_XILINX_AXI) += xilinx_axidma.o
  78 common-obj-$(CONFIG_XILINX_AXI) += xilinx_axienet.o
  79 common-obj-$(CONFIG_XILINX_AXI) += stream.o
  80
  81 # PKUnity SoC devices
  82 common-obj-$(CONFIG_PUV3) += puv3_intc.o
  83 common-obj-$(CONFIG_PUV3) += puv3_ost.o
  84 common-obj-$(CONFIG_PUV3) += puv3_gpio.o
  85 common-obj-$(CONFIG_PUV3) += puv3_pm.o
  86 common-obj-$(CONFIG_PUV3) += puv3_dma.o
  87
  88 # ARM devices
  89 common-obj-$(CONFIG_ARM_TIMER) += arm_timer.o
  90 common-obj-$(CONFIG_PL011) += pl011.o
  91 common-obj-$(CONFIG_PL022) += pl022.o
  92 common-obj-$(CONFIG_PL031) += pl031.o
  93 common-obj-$(CONFIG_PL041) += pl041.o lm4549.o
  94 common-obj-$(CONFIG_PL050) += pl050.o
  95 common-obj-$(CONFIG_PL061) += pl061.o
  96 common-obj-$(CONFIG_PL080) += pl080.o
  97 common-obj-$(CONFIG_PL110) += pl110.o
  98 common-obj-$(CONFIG_PL181) += pl181.o
  99 common-obj-$(CONFIG_PL190) += pl190.o
 100 common-obj-$(CONFIG_PL310) += arm_l2x0.o
 101 common-obj-$(CONFIG_VERSATILE_PCI) += versatile_pci.o
 102 common-obj-$(CONFIG_VERSATILE_I2C) += versatile_i2c.o
 103 common-obj-$(CONFIG_CADENCE) += cadence_uart.o
 104 common-obj-$(CONFIG_CADENCE) += cadence_ttc.o
 105 common-obj-$(CONFIG_CADENCE) += cadence_gem.o
 106 common-obj-$(CONFIG_XGMAC) += xgmac.o
 107
 108 # PCI watchdog devices
 109 common-obj-$(CONFIG_PCI) += wdt_i6300esb.o
 110
 111 # IndustryPack
 112 common-obj-$(CONFIG_IPACK) += tpci200.o ipoctal232.o ipack.o
 113
 114 # PCI network cards
 115 common-obj-$(CONFIG_NE2000_PCI) += ne2000.o
 116 common-obj-$(CONFIG_EEPRO100_PCI) += eepro100.o
 117 common-obj-$(CONFIG_PCNET_PCI) += pcnet-pci.o
 118 common-obj-$(CONFIG_PCNET_COMMON) += pcnet.o
 119 common-obj-$(CONFIG_E1000_PCI) += e1000.o
 120 common-obj-$(CONFIG_RTL8139_PCI) += rtl8139.o
 121
 122 common-obj-$(CONFIG_SMC91C111) += smc91c111.o
 123 common-obj-$(CONFIG_LAN9118) += lan9118.o
 124 common-obj-$(CONFIG_NE2000_ISA) += ne2000-isa.o
 125 common-obj-$(CONFIG_OPENCORES_ETH) += opencores_eth.o
 126
 127 # SCSI layer
 128 common-obj-$(CONFIG_LSI_SCSI_PCI) += lsi53c895a.o
 129 common-obj-$(CONFIG_MEGASAS_SCSI_PCI) += megasas.o
 130 common-obj-$(CONFIG_ESP) += esp.o
 131 common-obj-$(CONFIG_ESP_PCI) += esp-pci.o
 132
 133 common-obj-y += sysbus.o isa-bus.o
 134 common-obj-y += qdev-addr.o
 135
 136 # VGA
 137 common-obj-$(CONFIG_VGA_PCI) += vga-pci.o
 138 common-obj-$(CONFIG_VGA_ISA) += vga-isa.o
 139 common-obj-$(CONFIG_VGA_ISA_MM) += vga-isa-mm.o
 140 common-obj-$(CONFIG_VMWARE_VGA) += vmware_vga.o
 141 common-obj-$(CONFIG_VMMOUSE) += vmmouse.o
 142 common-obj-$(CONFIG_VGA_CIRRUS) += cirrus_vga.o
 143
 144 common-obj-$(CONFIG_RC4030) += rc4030.o
 145 common-obj-$(CONFIG_DP8393X) += dp8393x.o
 146 common-obj-$(CONFIG_DS1225Y) += ds1225y.o
 147 common-obj-$(CONFIG_MIPSNET) += mipsnet.o
 148
 149 common-obj-y += null-machine.o
 150
 151 # Sound
 152 sound-obj-y =
 153 sound-obj-$(CONFIG_SB16) += sb16.o
 154 sound-obj-$(CONFIG_ES1370) += es1370.o
 155 sound-obj-$(CONFIG_AC97) += ac97.o
 156 sound-obj-$(CONFIG_ADLIB) += fmopl.o adlib.o
 157 sound-obj-$(CONFIG_GUS) += gus.o gusemu_hal.o gusemu_mixer.o
 158 sound-obj-$(CONFIG_CS4231A) += cs4231a.o
 159 sound-obj-$(CONFIG_HDA) += intel-hda.o hda-audio.o
 160
 161 $(obj)/adlib.o $(obj)/fmopl.o: QEMU_CFLAGS += -DBUILD_Y8950=0
 162
 163 common-obj-$(CONFIG_SOUND) += $(sound-obj-y)
 164
 165 common-obj-$(CONFIG_REALLY_VIRTFS) += 9pfs/
 166
 167 common-obj-y += usb/
 168 common-obj-$(CONFIG_PTIMER) += ptimer.o
 169 common-obj-$(CONFIG_MAX7310) += max7310.o
 170 common-obj-$(CONFIG_WM8750) += wm8750.o
 171 common-obj-$(CONFIG_TWL92230) += twl92230.o
 172 common-obj-$(CONFIG_TSC2005) += tsc2005.o
 173 common-obj-$(CONFIG_LM832X) += lm832x.o
 174 common-obj-$(CONFIG_TMP105) += tmp105.o
 175 common-obj-$(CONFIG_STELLARIS_INPUT) += stellaris_input.o
 176 common-obj-$(CONFIG_SSD0303) += ssd0303.o
 177 common-obj-$(CONFIG_SSD0323) += ssd0323.o
 178 common-obj-$(CONFIG_ADS7846) += ads7846.o
 179 common-obj-$(CONFIG_MAX111X) += max111x.o
 180 common-obj-$(CONFIG_DS1338) += ds1338.o
 181 common-obj-y += i2c.o smbus.o smbus_eeprom.o
 182 common-obj-y += eeprom93xx.o
 183 common-obj-y += scsi-disk.o cdrom.o hd-geometry.o block-common.o
 184 common-obj-y += scsi-generic.o scsi-bus.o
 185 common-obj-y += hid.o
 186 common-obj-$(CONFIG_SSI) += ssi.o
 187 common-obj-$(CONFIG_SSI_M25P80) += m25p80.o
 188 common-obj-$(CONFIG_SSI_SD) += ssi-sd.o
 189 common-obj-$(CONFIG_SD) += sd.o
 190 common-obj-y += bt.o bt-l2cap.o bt-sdp.o bt-hci.o bt-hid.o
 191 common-obj-y += bt-hci-csr.o
 192 common-obj-y += ps2.o
 193 common-obj-y += qdev-monitor.o
 194 common-obj-y += qdev-properties-system.o
 195
 196 # xen backend driver support
 197 common-obj-$(CONFIG_XEN_BACKEND) += xen_backend.o xen_devconfig.o
 198 common-obj-$(CONFIG_XEN_BACKEND) += xen_console.o xenfb.o xen_disk.o xen_nic.o
 199
 200 # Per-target files
 201 # virtio has to be here due to weird dependency between PCI and virtio-net.
 202 # need to fix this properly
 203 obj-$(CONFIG_VIRTIO) += dataplane/
 204 obj-$(CONFIG_VIRTIO) += virtio.o virtio-blk.o virtio-balloon.o virtio-net.o
 205 obj-$(CONFIG_VIRTIO) += virtio-serial-bus.o virtio-scsi.o
 206 obj-$(CONFIG_SOFTMMU) += vhost_net.o
 207 obj-$(CONFIG_VHOST_NET) += vhost.o
 208 obj-$(CONFIG_REALLY_VIRTFS) += 9pfs/
 209 obj-$(CONFIG_VGA) += vga.o
 210 obj-$(CONFIG_SOFTMMU) += device-hotplug.o
 211 obj-$(CONFIG_XEN) += xen_domainbuild.o xen_machine_pv.o
 212
 213 # Inter-VM PCI shared memory & VFIO PCI device assignment
 214 ifeq ($(CONFIG_PCI), y)
 215 obj-$(CONFIG_KVM) += ivshmem.o
 216 obj-$(CONFIG_LINUX) += vfio_pci.o
 217 endif
 218
 219 endif