hw/arm: Factor out powerdown notifier from GPIO

[mirror_qemu.git] / hw / arm / virt.c

/*
 * ARM mach-virt emulation
 *
 * Copyright (c) 2013 Linaro Limited
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms and conditions of the GNU General Public License,
 * version 2 or later, as published by the Free Software Foundation.
 *
 * This program is distributed in the hope it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
 * more details.
 *
 * You should have received a copy of the GNU General Public License along with
 * this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 * Emulate a virtual board which works by passing Linux all the information
 * it needs about what devices are present via the device tree.
 * There are some restrictions about what we can do here:
 *  + we can only present devices whose Linux drivers will work based
 *    purely on the device tree with no platform data at all
 *  + we want to present a very stripped-down minimalist platform,
 *    both because this reduces the security attack surface from the guest
 *    and also because it reduces our exposure to being broken when
 *    the kernel updates its device tree bindings and requires further
 *    information in a device binding that we aren't providing.
 * This is essentially the same approach kvmtool uses.
 */

#include "qemu/osdep.h"
#include "qemu-common.h"
#include "qemu/units.h"
#include "qemu/option.h"
#include "qapi/error.h"
#include "hw/sysbus.h"
#include "hw/boards.h"
#include "hw/arm/boot.h"
#include "hw/arm/primecell.h"
#include "hw/arm/virt.h"
#include "hw/block/flash.h"
#include "hw/vfio/vfio-calxeda-xgmac.h"
#include "hw/vfio/vfio-amd-xgbe.h"
#include "hw/display/ramfb.h"
#include "net/net.h"
#include "sysemu/device_tree.h"
#include "sysemu/numa.h"
#include "sysemu/runstate.h"
#include "sysemu/sysemu.h"
#include "sysemu/kvm.h"
#include "hw/loader.h"
#include "exec/address-spaces.h"
#include "qemu/bitops.h"
#include "qemu/error-report.h"
#include "qemu/module.h"
#include "hw/pci-host/gpex.h"
#include "hw/arm/sysbus-fdt.h"
#include "hw/platform-bus.h"
#include "hw/qdev-properties.h"
#include "hw/arm/fdt.h"
#include "hw/intc/arm_gic.h"
#include "hw/intc/arm_gicv3_common.h"
#include "hw/irq.h"
#include "kvm_arm.h"
#include "hw/firmware/smbios.h"
#include "qapi/visitor.h"
#include "standard-headers/linux/input.h"
#include "hw/arm/smmuv3.h"
#include "hw/acpi/acpi.h"
#include "target/arm/internals.h"
#include "hw/mem/pc-dimm.h"
#include "hw/mem/nvdimm.h"
#include "hw/acpi/generic_event_device.h"

#define DEFINE_VIRT_MACHINE_LATEST(major, minor, latest) \
    static void virt_##major##_##minor##_class_init(ObjectClass *oc, \
                                                    void *data) \
    { \
        MachineClass *mc = MACHINE_CLASS(oc); \
        virt_machine_##major##_##minor##_options(mc); \
        mc->desc = "QEMU " # major "." # minor " ARM Virtual Machine"; \
        if (latest) { \
            mc->alias = "virt"; \
        } \
    } \
    static const TypeInfo machvirt_##major##_##minor##_info = { \
        .name = MACHINE_TYPE_NAME("virt-" # major "." # minor), \
        .parent = TYPE_VIRT_MACHINE, \
        .class_init = virt_##major##_##minor##_class_init, \
    }; \
    static void machvirt_machine_##major##_##minor##_init(void) \
    { \
        type_register_static(&machvirt_##major##_##minor##_info); \
    } \
    type_init(machvirt_machine_##major##_##minor##_init);

#define DEFINE_VIRT_MACHINE_AS_LATEST(major, minor) \
    DEFINE_VIRT_MACHINE_LATEST(major, minor, true)
#define DEFINE_VIRT_MACHINE(major, minor) \
    DEFINE_VIRT_MACHINE_LATEST(major, minor, false)


/* Number of external interrupt lines to configure the GIC with */
#define NUM_IRQS 256

#define PLATFORM_BUS_NUM_IRQS 64

/* Legacy RAM limit in GB (< version 4.0) */
#define LEGACY_RAMLIMIT_GB 255
#define LEGACY_RAMLIMIT_BYTES (LEGACY_RAMLIMIT_GB * GiB)

/* Addresses and sizes of our components.
 * 0..128MB is space for a flash device so we can run bootrom code such as UEFI.
 * 128MB..256MB is used for miscellaneous device I/O.
 * 256MB..1GB is reserved for possible future PCI support (ie where the
 * PCI memory window will go if we add a PCI host controller).
 * 1GB and up is RAM (which may happily spill over into the
 * high memory region beyond 4GB).
 * This represents a compromise between how much RAM can be given to
 * a 32 bit VM and leaving space for expansion and in particular for PCI.
 * Note that devices should generally be placed at multiples of 0x10000,
 * to accommodate guests using 64K pages.
 */
static const MemMapEntry base_memmap[] = {
    /* Space up to 0x8000000 is reserved for a boot ROM */
    [VIRT_FLASH] =              {          0, 0x08000000 },
    [VIRT_CPUPERIPHS] =         { 0x08000000, 0x00020000 },
    /* GIC distributor and CPU interfaces sit inside the CPU peripheral space */
    [VIRT_GIC_DIST] =           { 0x08000000, 0x00010000 },
    [VIRT_GIC_CPU] =            { 0x08010000, 0x00010000 },
    [VIRT_GIC_V2M] =            { 0x08020000, 0x00001000 },
    [VIRT_GIC_HYP] =            { 0x08030000, 0x00010000 },
    [VIRT_GIC_VCPU] =           { 0x08040000, 0x00010000 },
    /* The space in between here is reserved for GICv3 CPU/vCPU/HYP */
    [VIRT_GIC_ITS] =            { 0x08080000, 0x00020000 },
    /* This redistributor space allows up to 2*64kB*123 CPUs */
    [VIRT_GIC_REDIST] =         { 0x080A0000, 0x00F60000 },
    [VIRT_UART] =               { 0x09000000, 0x00001000 },
    [VIRT_RTC] =                { 0x09010000, 0x00001000 },
    [VIRT_FW_CFG] =             { 0x09020000, 0x00000018 },
    [VIRT_GPIO] =               { 0x09030000, 0x00001000 },
    [VIRT_SECURE_UART] =        { 0x09040000, 0x00001000 },
    [VIRT_SMMU] =               { 0x09050000, 0x00020000 },
    [VIRT_PCDIMM_ACPI] =        { 0x09070000, MEMORY_HOTPLUG_IO_LEN },
    [VIRT_ACPI_GED] =           { 0x09080000, ACPI_GED_EVT_SEL_LEN },
    [VIRT_MMIO] =               { 0x0a000000, 0x00000200 },
    /* ...repeating for a total of NUM_VIRTIO_TRANSPORTS, each of that size */
    [VIRT_PLATFORM_BUS] =       { 0x0c000000, 0x02000000 },
    [VIRT_SECURE_MEM] =         { 0x0e000000, 0x01000000 },
    [VIRT_PCIE_MMIO] =          { 0x10000000, 0x2eff0000 },
    [VIRT_PCIE_PIO] =           { 0x3eff0000, 0x00010000 },
    [VIRT_PCIE_ECAM] =          { 0x3f000000, 0x01000000 },
    /* Actual RAM size depends on initial RAM and device memory settings */
    [VIRT_MEM] =                { GiB, LEGACY_RAMLIMIT_BYTES },
};

/*
 * Highmem IO Regions: This memory map is floating, located after the RAM.
 * Each MemMapEntry base (GPA) will be dynamically computed, depending on the
 * top of the RAM, so that its base get the same alignment as the size,
 * ie. a 512GiB entry will be aligned on a 512GiB boundary. If there is
 * less than 256GiB of RAM, the floating area starts at the 256GiB mark.
 * Note the extended_memmap is sized so that it eventually also includes the
 * base_memmap entries (VIRT_HIGH_GIC_REDIST2 index is greater than the last
 * index of base_memmap).
 */
static MemMapEntry extended_memmap[] = {
    /* Additional 64 MB redist region (can contain up to 512 redistributors) */
    [VIRT_HIGH_GIC_REDIST2] =   { 0x0, 64 * MiB },
    [VIRT_HIGH_PCIE_ECAM] =     { 0x0, 256 * MiB },
    /* Second PCIe window */
    [VIRT_HIGH_PCIE_MMIO] =     { 0x0, 512 * GiB },
};

static const int a15irqmap[] = {
    [VIRT_UART] = 1,
    [VIRT_RTC] = 2,
    [VIRT_PCIE] = 3, /* ... to 6 */
    [VIRT_GPIO] = 7,
    [VIRT_SECURE_UART] = 8,
    [VIRT_ACPI_GED] = 9,
    [VIRT_MMIO] = 16, /* ...to 16 + NUM_VIRTIO_TRANSPORTS - 1 */
    [VIRT_GIC_V2M] = 48, /* ...to 48 + NUM_GICV2M_SPIS - 1 */
    [VIRT_SMMU] = 74,    /* ...to 74 + NUM_SMMU_IRQS - 1 */
    [VIRT_PLATFORM_BUS] = 112, /* ...to 112 + PLATFORM_BUS_NUM_IRQS -1 */
};

static const char *valid_cpus[] = {
    ARM_CPU_TYPE_NAME("cortex-a7"),
    ARM_CPU_TYPE_NAME("cortex-a15"),
    ARM_CPU_TYPE_NAME("cortex-a53"),
    ARM_CPU_TYPE_NAME("cortex-a57"),
    ARM_CPU_TYPE_NAME("cortex-a72"),
    ARM_CPU_TYPE_NAME("host"),
    ARM_CPU_TYPE_NAME("max"),
};

static bool cpu_type_valid(const char *cpu)
{
    int i;

    for (i = 0; i < ARRAY_SIZE(valid_cpus); i++) {
        if (strcmp(cpu, valid_cpus[i]) == 0) {
            return true;
        }
    }
    return false;
}

static void create_fdt(VirtMachineState *vms)
{
    MachineState *ms = MACHINE(vms);
    int nb_numa_nodes = ms->numa_state->num_nodes;
    void *fdt = create_device_tree(&vms->fdt_size);

    if (!fdt) {
        error_report("create_device_tree() failed");
        exit(1);
    }

    vms->fdt = fdt;

    /* Header */
    qemu_fdt_setprop_string(fdt, "/", "compatible", "linux,dummy-virt");
    qemu_fdt_setprop_cell(fdt, "/", "#address-cells", 0x2);
    qemu_fdt_setprop_cell(fdt, "/", "#size-cells", 0x2);

    /* /chosen must exist for load_dtb to fill in necessary properties later */
    qemu_fdt_add_subnode(fdt, "/chosen");

    /* Clock node, for the benefit of the UART. The kernel device tree
     * binding documentation claims the PL011 node clock properties are
     * optional but in practice if you omit them the kernel refuses to
     * probe for the device.
     */
    vms->clock_phandle = qemu_fdt_alloc_phandle(fdt);
    qemu_fdt_add_subnode(fdt, "/apb-pclk");
    qemu_fdt_setprop_string(fdt, "/apb-pclk", "compatible", "fixed-clock");
    qemu_fdt_setprop_cell(fdt, "/apb-pclk", "#clock-cells", 0x0);
    qemu_fdt_setprop_cell(fdt, "/apb-pclk", "clock-frequency", 24000000);
    qemu_fdt_setprop_string(fdt, "/apb-pclk", "clock-output-names",
                                "clk24mhz");
    qemu_fdt_setprop_cell(fdt, "/apb-pclk", "phandle", vms->clock_phandle);

    if (nb_numa_nodes > 0 && ms->numa_state->have_numa_distance) {
        int size = nb_numa_nodes * nb_numa_nodes * 3 * sizeof(uint32_t);
        uint32_t *matrix = g_malloc0(size);
        int idx, i, j;

        for (i = 0; i < nb_numa_nodes; i++) {
            for (j = 0; j < nb_numa_nodes; j++) {
                idx = (i * nb_numa_nodes + j) * 3;
                matrix[idx + 0] = cpu_to_be32(i);
                matrix[idx + 1] = cpu_to_be32(j);
                matrix[idx + 2] =
                    cpu_to_be32(ms->numa_state->nodes[i].distance[j]);
            }
        }

        qemu_fdt_add_subnode(fdt, "/distance-map");
        qemu_fdt_setprop_string(fdt, "/distance-map", "compatible",
                                "numa-distance-map-v1");
        qemu_fdt_setprop(fdt, "/distance-map", "distance-matrix",
                         matrix, size);
        g_free(matrix);
    }
}

static void fdt_add_timer_nodes(const VirtMachineState *vms)
{
    /* On real hardware these interrupts are level-triggered.
     * On KVM they were edge-triggered before host kernel version 4.4,
     * and level-triggered afterwards.
     * On emulated QEMU they are level-triggered.
     *
     * Getting the DTB info about them wrong is awkward for some
     * guest kernels:
     *  pre-4.8 ignore the DT and leave the interrupt configured
     *   with whatever the GIC reset value (or the bootloader) left it at
     *  4.8 before rc6 honour the incorrect data by programming it back
     *   into the GIC, causing problems
     *  4.8rc6 and later ignore the DT and always write "level triggered"
     *   into the GIC
     *
     * For backwards-compatibility, virt-2.8 and earlier will continue
     * to say these are edge-triggered, but later machines will report
     * the correct information.
     */
    ARMCPU *armcpu;
    VirtMachineClass *vmc = VIRT_MACHINE_GET_CLASS(vms);
    uint32_t irqflags = GIC_FDT_IRQ_FLAGS_LEVEL_HI;

    if (vmc->claim_edge_triggered_timers) {
        irqflags = GIC_FDT_IRQ_FLAGS_EDGE_LO_HI;
    }

    if (vms->gic_version == 2) {
        irqflags = deposit32(irqflags, GIC_FDT_IRQ_PPI_CPU_START,
                             GIC_FDT_IRQ_PPI_CPU_WIDTH,
                             (1 << vms->smp_cpus) - 1);
    }

    qemu_fdt_add_subnode(vms->fdt, "/timer");

    armcpu = ARM_CPU(qemu_get_cpu(0));
    if (arm_feature(&armcpu->env, ARM_FEATURE_V8)) {
        const char compat[] = "arm,armv8-timer\0arm,armv7-timer";
        qemu_fdt_setprop(vms->fdt, "/timer", "compatible",
                         compat, sizeof(compat));
    } else {
        qemu_fdt_setprop_string(vms->fdt, "/timer", "compatible",
                                "arm,armv7-timer");
    }
    qemu_fdt_setprop(vms->fdt, "/timer", "always-on", NULL, 0);
    qemu_fdt_setprop_cells(vms->fdt, "/timer", "interrupts",
                       GIC_FDT_IRQ_TYPE_PPI, ARCH_TIMER_S_EL1_IRQ, irqflags,
                       GIC_FDT_IRQ_TYPE_PPI, ARCH_TIMER_NS_EL1_IRQ, irqflags,
                       GIC_FDT_IRQ_TYPE_PPI, ARCH_TIMER_VIRT_IRQ, irqflags,
                       GIC_FDT_IRQ_TYPE_PPI, ARCH_TIMER_NS_EL2_IRQ, irqflags);
}

static void fdt_add_cpu_nodes(const VirtMachineState *vms)
{
    int cpu;
    int addr_cells = 1;
    const MachineState *ms = MACHINE(vms);

    /*
     * From Documentation/devicetree/bindings/arm/cpus.txt
     *  On ARM v8 64-bit systems value should be set to 2,
     *  that corresponds to the MPIDR_EL1 register size.
     *  If MPIDR_EL1[63:32] value is equal to 0 on all CPUs
     *  in the system, #address-cells can be set to 1, since
     *  MPIDR_EL1[63:32] bits are not used for CPUs
     *  identification.
     *
     *  Here we actually don't know whether our system is 32- or 64-bit one.
     *  The simplest way to go is to examine affinity IDs of all our CPUs. If
     *  at least one of them has Aff3 populated, we set #address-cells to 2.
     */
    for (cpu = 0; cpu < vms->smp_cpus; cpu++) {
        ARMCPU *armcpu = ARM_CPU(qemu_get_cpu(cpu));

        if (armcpu->mp_affinity & ARM_AFF3_MASK) {
            addr_cells = 2;
            break;
        }
    }

    qemu_fdt_add_subnode(vms->fdt, "/cpus");
    qemu_fdt_setprop_cell(vms->fdt, "/cpus", "#address-cells", addr_cells);
    qemu_fdt_setprop_cell(vms->fdt, "/cpus", "#size-cells", 0x0);

    for (cpu = vms->smp_cpus - 1; cpu >= 0; cpu--) {
        char *nodename = g_strdup_printf("/cpus/cpu@%d", cpu);
        ARMCPU *armcpu = ARM_CPU(qemu_get_cpu(cpu));
        CPUState *cs = CPU(armcpu);

        qemu_fdt_add_subnode(vms->fdt, nodename);
        qemu_fdt_setprop_string(vms->fdt, nodename, "device_type", "cpu");
        qemu_fdt_setprop_string(vms->fdt, nodename, "compatible",
                                    armcpu->dtb_compatible);

        if (vms->psci_conduit != QEMU_PSCI_CONDUIT_DISABLED
            && vms->smp_cpus > 1) {
            qemu_fdt_setprop_string(vms->fdt, nodename,
                                        "enable-method", "psci");
        }

        if (addr_cells == 2) {
            qemu_fdt_setprop_u64(vms->fdt, nodename, "reg",
                                 armcpu->mp_affinity);
        } else {
            qemu_fdt_setprop_cell(vms->fdt, nodename, "reg",
                                  armcpu->mp_affinity);
        }

        if (ms->possible_cpus->cpus[cs->cpu_index].props.has_node_id) {
            qemu_fdt_setprop_cell(vms->fdt, nodename, "numa-node-id",
                ms->possible_cpus->cpus[cs->cpu_index].props.node_id);
        }

        g_free(nodename);
    }
}

static void fdt_add_its_gic_node(VirtMachineState *vms)
{
    char *nodename;

    vms->msi_phandle = qemu_fdt_alloc_phandle(vms->fdt);
    nodename = g_strdup_printf("/intc/its@%" PRIx64,
                               vms->memmap[VIRT_GIC_ITS].base);
    qemu_fdt_add_subnode(vms->fdt, nodename);
    qemu_fdt_setprop_string(vms->fdt, nodename, "compatible",
                            "arm,gic-v3-its");
    qemu_fdt_setprop(vms->fdt, nodename, "msi-controller", NULL, 0);
    qemu_fdt_setprop_sized_cells(vms->fdt, nodename, "reg",
                                 2, vms->memmap[VIRT_GIC_ITS].base,
                                 2, vms->memmap[VIRT_GIC_ITS].size);
    qemu_fdt_setprop_cell(vms->fdt, nodename, "phandle", vms->msi_phandle);
    g_free(nodename);
}

static void fdt_add_v2m_gic_node(VirtMachineState *vms)
{
    char *nodename;

    nodename = g_strdup_printf("/intc/v2m@%" PRIx64,
                               vms->memmap[VIRT_GIC_V2M].base);
    vms->msi_phandle = qemu_fdt_alloc_phandle(vms->fdt);
    qemu_fdt_add_subnode(vms->fdt, nodename);
    qemu_fdt_setprop_string(vms->fdt, nodename, "compatible",
                            "arm,gic-v2m-frame");
    qemu_fdt_setprop(vms->fdt, nodename, "msi-controller", NULL, 0);
    qemu_fdt_setprop_sized_cells(vms->fdt, nodename, "reg",
                                 2, vms->memmap[VIRT_GIC_V2M].base,
                                 2, vms->memmap[VIRT_GIC_V2M].size);
    qemu_fdt_setprop_cell(vms->fdt, nodename, "phandle", vms->msi_phandle);
    g_free(nodename);
}

static void fdt_add_gic_node(VirtMachineState *vms)
{
    char *nodename;

    vms->gic_phandle = qemu_fdt_alloc_phandle(vms->fdt);
    qemu_fdt_setprop_cell(vms->fdt, "/", "interrupt-parent", vms->gic_phandle);

    nodename = g_strdup_printf("/intc@%" PRIx64,
                               vms->memmap[VIRT_GIC_DIST].base);
    qemu_fdt_add_subnode(vms->fdt, nodename);
    qemu_fdt_setprop_cell(vms->fdt, nodename, "#interrupt-cells", 3);
    qemu_fdt_setprop(vms->fdt, nodename, "interrupt-controller", NULL, 0);
    qemu_fdt_setprop_cell(vms->fdt, nodename, "#address-cells", 0x2);
    qemu_fdt_setprop_cell(vms->fdt, nodename, "#size-cells", 0x2);
    qemu_fdt_setprop(vms->fdt, nodename, "ranges", NULL, 0);
    if (vms->gic_version == 3) {
        int nb_redist_regions = virt_gicv3_redist_region_count(vms);

        qemu_fdt_setprop_string(vms->fdt, nodename, "compatible",
                                "arm,gic-v3");

        qemu_fdt_setprop_cell(vms->fdt, nodename,
                              "#redistributor-regions", nb_redist_regions);

        if (nb_redist_regions == 1) {
            qemu_fdt_setprop_sized_cells(vms->fdt, nodename, "reg",
                                         2, vms->memmap[VIRT_GIC_DIST].base,
                                         2, vms->memmap[VIRT_GIC_DIST].size,
                                         2, vms->memmap[VIRT_GIC_REDIST].base,
                                         2, vms->memmap[VIRT_GIC_REDIST].size);
        } else {
            qemu_fdt_setprop_sized_cells(vms->fdt, nodename, "reg",
                                 2, vms->memmap[VIRT_GIC_DIST].base,
                                 2, vms->memmap[VIRT_GIC_DIST].size,
                                 2, vms->memmap[VIRT_GIC_REDIST].base,
                                 2, vms->memmap[VIRT_GIC_REDIST].size,
                                 2, vms->memmap[VIRT_HIGH_GIC_REDIST2].base,
                                 2, vms->memmap[VIRT_HIGH_GIC_REDIST2].size);
        }

        if (vms->virt) {
            qemu_fdt_setprop_cells(vms->fdt, nodename, "interrupts",
                                   GIC_FDT_IRQ_TYPE_PPI, ARCH_GIC_MAINT_IRQ,
                                   GIC_FDT_IRQ_FLAGS_LEVEL_HI);
        }
    } else {
        /* 'cortex-a15-gic' means 'GIC v2' */
        qemu_fdt_setprop_string(vms->fdt, nodename, "compatible",
                                "arm,cortex-a15-gic");
        if (!vms->virt) {
            qemu_fdt_setprop_sized_cells(vms->fdt, nodename, "reg",
                                         2, vms->memmap[VIRT_GIC_DIST].base,
                                         2, vms->memmap[VIRT_GIC_DIST].size,
                                         2, vms->memmap[VIRT_GIC_CPU].base,
                                         2, vms->memmap[VIRT_GIC_CPU].size);
        } else {
            qemu_fdt_setprop_sized_cells(vms->fdt, nodename, "reg",
                                         2, vms->memmap[VIRT_GIC_DIST].base,
                                         2, vms->memmap[VIRT_GIC_DIST].size,
                                         2, vms->memmap[VIRT_GIC_CPU].base,
                                         2, vms->memmap[VIRT_GIC_CPU].size,
                                         2, vms->memmap[VIRT_GIC_HYP].base,
                                         2, vms->memmap[VIRT_GIC_HYP].size,
                                         2, vms->memmap[VIRT_GIC_VCPU].base,
                                         2, vms->memmap[VIRT_GIC_VCPU].size);
            qemu_fdt_setprop_cells(vms->fdt, nodename, "interrupts",
                                   GIC_FDT_IRQ_TYPE_PPI, ARCH_GIC_MAINT_IRQ,
                                   GIC_FDT_IRQ_FLAGS_LEVEL_HI);
        }
    }

    qemu_fdt_setprop_cell(vms->fdt, nodename, "phandle", vms->gic_phandle);
    g_free(nodename);
}

static void fdt_add_pmu_nodes(const VirtMachineState *vms)
{
    CPUState *cpu;
    ARMCPU *armcpu;
    uint32_t irqflags = GIC_FDT_IRQ_FLAGS_LEVEL_HI;

    CPU_FOREACH(cpu) {
        armcpu = ARM_CPU(cpu);
        if (!arm_feature(&armcpu->env, ARM_FEATURE_PMU)) {
            return;
        }
        if (kvm_enabled()) {
            if (kvm_irqchip_in_kernel()) {
                kvm_arm_pmu_set_irq(cpu, PPI(VIRTUAL_PMU_IRQ));
            }
            kvm_arm_pmu_init(cpu);
        }
    }

    if (vms->gic_version == 2) {
        irqflags = deposit32(irqflags, GIC_FDT_IRQ_PPI_CPU_START,
                             GIC_FDT_IRQ_PPI_CPU_WIDTH,
                             (1 << vms->smp_cpus) - 1);
    }

    armcpu = ARM_CPU(qemu_get_cpu(0));
    qemu_fdt_add_subnode(vms->fdt, "/pmu");
    if (arm_feature(&armcpu->env, ARM_FEATURE_V8)) {
        const char compat[] = "arm,armv8-pmuv3";
        qemu_fdt_setprop(vms->fdt, "/pmu", "compatible",
                         compat, sizeof(compat));
        qemu_fdt_setprop_cells(vms->fdt, "/pmu", "interrupts",
                               GIC_FDT_IRQ_TYPE_PPI, VIRTUAL_PMU_IRQ, irqflags);
    }
}

static inline DeviceState *create_acpi_ged(VirtMachineState *vms, qemu_irq *pic)
{
    DeviceState *dev;
    MachineState *ms = MACHINE(vms);
    int irq = vms->irqmap[VIRT_ACPI_GED];
    uint32_t event = 0;

    if (ms->ram_slots) {
        event = ACPI_GED_MEM_HOTPLUG_EVT;
    }

    dev = qdev_create(NULL, TYPE_ACPI_GED);
    qdev_prop_set_uint32(dev, "ged-event", event);

    sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, vms->memmap[VIRT_ACPI_GED].base);
    sysbus_mmio_map(SYS_BUS_DEVICE(dev), 1, vms->memmap[VIRT_PCDIMM_ACPI].base);
    sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, pic[irq]);

    qdev_init_nofail(dev);

    return dev;
}

static void create_its(VirtMachineState *vms, DeviceState *gicdev)
{
    const char *itsclass = its_class_name();
    DeviceState *dev;

    if (!itsclass) {
        /* Do nothing if not supported */
        return;
    }

    dev = qdev_create(NULL, itsclass);

    object_property_set_link(OBJECT(dev), OBJECT(gicdev), "parent-gicv3",
                             &error_abort);
    qdev_init_nofail(dev);
    sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, vms->memmap[VIRT_GIC_ITS].base);

    fdt_add_its_gic_node(vms);
}

static void create_v2m(VirtMachineState *vms, qemu_irq *pic)
{
    int i;
    int irq = vms->irqmap[VIRT_GIC_V2M];
    DeviceState *dev;

    dev = qdev_create(NULL, "arm-gicv2m");
    sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, vms->memmap[VIRT_GIC_V2M].base);
    qdev_prop_set_uint32(dev, "base-spi", irq);
    qdev_prop_set_uint32(dev, "num-spi", NUM_GICV2M_SPIS);
    qdev_init_nofail(dev);

    for (i = 0; i < NUM_GICV2M_SPIS; i++) {
        sysbus_connect_irq(SYS_BUS_DEVICE(dev), i, pic[irq + i]);
    }

    fdt_add_v2m_gic_node(vms);
}

static void create_gic(VirtMachineState *vms, qemu_irq *pic)
{
    MachineState *ms = MACHINE(vms);
    /* We create a standalone GIC */
    DeviceState *gicdev;
    SysBusDevice *gicbusdev;
    const char *gictype;
    int type = vms->gic_version, i;
    unsigned int smp_cpus = ms->smp.cpus;
    uint32_t nb_redist_regions = 0;

    gictype = (type == 3) ? gicv3_class_name() : gic_class_name();

    gicdev = qdev_create(NULL, gictype);
    qdev_prop_set_uint32(gicdev, "revision", type);
    qdev_prop_set_uint32(gicdev, "num-cpu", smp_cpus);
    /* Note that the num-irq property counts both internal and external
     * interrupts; there are always 32 of the former (mandated by GIC spec).
     */
    qdev_prop_set_uint32(gicdev, "num-irq", NUM_IRQS + 32);
    if (!kvm_irqchip_in_kernel()) {
        qdev_prop_set_bit(gicdev, "has-security-extensions", vms->secure);
    }

    if (type == 3) {
        uint32_t redist0_capacity =
                    vms->memmap[VIRT_GIC_REDIST].size / GICV3_REDIST_SIZE;
        uint32_t redist0_count = MIN(smp_cpus, redist0_capacity);

        nb_redist_regions = virt_gicv3_redist_region_count(vms);

        qdev_prop_set_uint32(gicdev, "len-redist-region-count",
                             nb_redist_regions);
        qdev_prop_set_uint32(gicdev, "redist-region-count[0]", redist0_count);

        if (nb_redist_regions == 2) {
            uint32_t redist1_capacity =
                    vms->memmap[VIRT_HIGH_GIC_REDIST2].size / GICV3_REDIST_SIZE;

            qdev_prop_set_uint32(gicdev, "redist-region-count[1]",
                MIN(smp_cpus - redist0_count, redist1_capacity));
        }
    } else {
        if (!kvm_irqchip_in_kernel()) {
            qdev_prop_set_bit(gicdev, "has-virtualization-extensions",
                              vms->virt);
        }
    }
    qdev_init_nofail(gicdev);
    gicbusdev = SYS_BUS_DEVICE(gicdev);
    sysbus_mmio_map(gicbusdev, 0, vms->memmap[VIRT_GIC_DIST].base);
    if (type == 3) {
        sysbus_mmio_map(gicbusdev, 1, vms->memmap[VIRT_GIC_REDIST].base);
        if (nb_redist_regions == 2) {
            sysbus_mmio_map(gicbusdev, 2,
                            vms->memmap[VIRT_HIGH_GIC_REDIST2].base);
        }
    } else {
        sysbus_mmio_map(gicbusdev, 1, vms->memmap[VIRT_GIC_CPU].base);
        if (vms->virt) {
            sysbus_mmio_map(gicbusdev, 2, vms->memmap[VIRT_GIC_HYP].base);
            sysbus_mmio_map(gicbusdev, 3, vms->memmap[VIRT_GIC_VCPU].base);
        }
    }

    /* Wire the outputs from each CPU's generic timer and the GICv3
     * maintenance interrupt signal to the appropriate GIC PPI inputs,
     * and the GIC's IRQ/FIQ/VIRQ/VFIQ interrupt outputs to the CPU's inputs.
     */
    for (i = 0; i < smp_cpus; i++) {
        DeviceState *cpudev = DEVICE(qemu_get_cpu(i));
        int ppibase = NUM_IRQS + i * GIC_INTERNAL + GIC_NR_SGIS;
        int irq;
        /* Mapping from the output timer irq lines from the CPU to the
         * GIC PPI inputs we use for the virt board.
         */
        const int timer_irq[] = {
            [GTIMER_PHYS] = ARCH_TIMER_NS_EL1_IRQ,
            [GTIMER_VIRT] = ARCH_TIMER_VIRT_IRQ,
            [GTIMER_HYP]  = ARCH_TIMER_NS_EL2_IRQ,
            [GTIMER_SEC]  = ARCH_TIMER_S_EL1_IRQ,
        };

        for (irq = 0; irq < ARRAY_SIZE(timer_irq); irq++) {
            qdev_connect_gpio_out(cpudev, irq,
                                  qdev_get_gpio_in(gicdev,
                                                   ppibase + timer_irq[irq]));
        }

        if (type == 3) {
            qemu_irq irq = qdev_get_gpio_in(gicdev,
                                            ppibase + ARCH_GIC_MAINT_IRQ);
            qdev_connect_gpio_out_named(cpudev, "gicv3-maintenance-interrupt",
                                        0, irq);
        } else if (vms->virt) {
            qemu_irq irq = qdev_get_gpio_in(gicdev,
                                            ppibase + ARCH_GIC_MAINT_IRQ);
            sysbus_connect_irq(gicbusdev, i + 4 * smp_cpus, irq);
        }

        qdev_connect_gpio_out_named(cpudev, "pmu-interrupt", 0,
                                    qdev_get_gpio_in(gicdev, ppibase
                                                     + VIRTUAL_PMU_IRQ));

        sysbus_connect_irq(gicbusdev, i, qdev_get_gpio_in(cpudev, ARM_CPU_IRQ));
        sysbus_connect_irq(gicbusdev, i + smp_cpus,
                           qdev_get_gpio_in(cpudev, ARM_CPU_FIQ));
        sysbus_connect_irq(gicbusdev, i + 2 * smp_cpus,
                           qdev_get_gpio_in(cpudev, ARM_CPU_VIRQ));
        sysbus_connect_irq(gicbusdev, i + 3 * smp_cpus,
                           qdev_get_gpio_in(cpudev, ARM_CPU_VFIQ));
    }

    for (i = 0; i < NUM_IRQS; i++) {
        pic[i] = qdev_get_gpio_in(gicdev, i);
    }

    fdt_add_gic_node(vms);

    if (type == 3 && vms->its) {
        create_its(vms, gicdev);
    } else if (type == 2) {
        create_v2m(vms, pic);
    }
}

static void create_uart(const VirtMachineState *vms, qemu_irq *pic, int uart,
                        MemoryRegion *mem, Chardev *chr)
{
    char *nodename;
    hwaddr base = vms->memmap[uart].base;
    hwaddr size = vms->memmap[uart].size;
    int irq = vms->irqmap[uart];
    const char compat[] = "arm,pl011\0arm,primecell";
    const char clocknames[] = "uartclk\0apb_pclk";
    DeviceState *dev = qdev_create(NULL, "pl011");
    SysBusDevice *s = SYS_BUS_DEVICE(dev);

    qdev_prop_set_chr(dev, "chardev", chr);
    qdev_init_nofail(dev);
    memory_region_add_subregion(mem, base,
                                sysbus_mmio_get_region(s, 0));
    sysbus_connect_irq(s, 0, pic[irq]);

    nodename = g_strdup_printf("/pl011@%" PRIx64, base);
    qemu_fdt_add_subnode(vms->fdt, nodename);
    /* Note that we can't use setprop_string because of the embedded NUL */
    qemu_fdt_setprop(vms->fdt, nodename, "compatible",
                         compat, sizeof(compat));
    qemu_fdt_setprop_sized_cells(vms->fdt, nodename, "reg",
                                     2, base, 2, size);
    qemu_fdt_setprop_cells(vms->fdt, nodename, "interrupts",
                               GIC_FDT_IRQ_TYPE_SPI, irq,
                               GIC_FDT_IRQ_FLAGS_LEVEL_HI);
    qemu_fdt_setprop_cells(vms->fdt, nodename, "clocks",
                               vms->clock_phandle, vms->clock_phandle);
    qemu_fdt_setprop(vms->fdt, nodename, "clock-names",
                         clocknames, sizeof(clocknames));

    if (uart == VIRT_UART) {
        qemu_fdt_setprop_string(vms->fdt, "/chosen", "stdout-path", nodename);
    } else {
        /* Mark as not usable by the normal world */
        qemu_fdt_setprop_string(vms->fdt, nodename, "status", "disabled");
        qemu_fdt_setprop_string(vms->fdt, nodename, "secure-status", "okay");

        qemu_fdt_add_subnode(vms->fdt, "/secure-chosen");
        qemu_fdt_setprop_string(vms->fdt, "/secure-chosen", "stdout-path",
                                nodename);
    }

    g_free(nodename);
}

static void create_rtc(const VirtMachineState *vms, qemu_irq *pic)
{
    char *nodename;
    hwaddr base = vms->memmap[VIRT_RTC].base;
    hwaddr size = vms->memmap[VIRT_RTC].size;
    int irq = vms->irqmap[VIRT_RTC];
    const char compat[] = "arm,pl031\0arm,primecell";

    sysbus_create_simple("pl031", base, pic[irq]);

    nodename = g_strdup_printf("/pl031@%" PRIx64, base);
    qemu_fdt_add_subnode(vms->fdt, nodename);
    qemu_fdt_setprop(vms->fdt, nodename, "compatible", compat, sizeof(compat));
    qemu_fdt_setprop_sized_cells(vms->fdt, nodename, "reg",
                                 2, base, 2, size);
    qemu_fdt_setprop_cells(vms->fdt, nodename, "interrupts",
                           GIC_FDT_IRQ_TYPE_SPI, irq,
                           GIC_FDT_IRQ_FLAGS_LEVEL_HI);
    qemu_fdt_setprop_cell(vms->fdt, nodename, "clocks", vms->clock_phandle);
    qemu_fdt_setprop_string(vms->fdt, nodename, "clock-names", "apb_pclk");
    g_free(nodename);
}

static DeviceState *gpio_key_dev;
static void virt_powerdown_req(Notifier *n, void *opaque)
{
    /* use gpio Pin 3 for power button event */
    qemu_set_irq(qdev_get_gpio_in(gpio_key_dev, 0), 1);
}

static void create_gpio(const VirtMachineState *vms, qemu_irq *pic)
{
    char *nodename;
    DeviceState *pl061_dev;
    hwaddr base = vms->memmap[VIRT_GPIO].base;
    hwaddr size = vms->memmap[VIRT_GPIO].size;
    int irq = vms->irqmap[VIRT_GPIO];
    const char compat[] = "arm,pl061\0arm,primecell";

    pl061_dev = sysbus_create_simple("pl061", base, pic[irq]);

    uint32_t phandle = qemu_fdt_alloc_phandle(vms->fdt);
    nodename = g_strdup_printf("/pl061@%" PRIx64, base);
    qemu_fdt_add_subnode(vms->fdt, nodename);
    qemu_fdt_setprop_sized_cells(vms->fdt, nodename, "reg",
                                 2, base, 2, size);
    qemu_fdt_setprop(vms->fdt, nodename, "compatible", compat, sizeof(compat));
    qemu_fdt_setprop_cell(vms->fdt, nodename, "#gpio-cells", 2);
    qemu_fdt_setprop(vms->fdt, nodename, "gpio-controller", NULL, 0);
    qemu_fdt_setprop_cells(vms->fdt, nodename, "interrupts",
                           GIC_FDT_IRQ_TYPE_SPI, irq,
                           GIC_FDT_IRQ_FLAGS_LEVEL_HI);
    qemu_fdt_setprop_cell(vms->fdt, nodename, "clocks", vms->clock_phandle);
    qemu_fdt_setprop_string(vms->fdt, nodename, "clock-names", "apb_pclk");
    qemu_fdt_setprop_cell(vms->fdt, nodename, "phandle", phandle);

    gpio_key_dev = sysbus_create_simple("gpio-key", -1,
                                        qdev_get_gpio_in(pl061_dev, 3));
    qemu_fdt_add_subnode(vms->fdt, "/gpio-keys");
    qemu_fdt_setprop_string(vms->fdt, "/gpio-keys", "compatible", "gpio-keys");
    qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys", "#size-cells", 0);
    qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys", "#address-cells", 1);

    qemu_fdt_add_subnode(vms->fdt, "/gpio-keys/poweroff");
    qemu_fdt_setprop_string(vms->fdt, "/gpio-keys/poweroff",
                            "label", "GPIO Key Poweroff");
    qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys/poweroff", "linux,code",
                          KEY_POWER);
    qemu_fdt_setprop_cells(vms->fdt, "/gpio-keys/poweroff",
                           "gpios", phandle, 3, 0);
    g_free(nodename);
}

static void create_virtio_devices(const VirtMachineState *vms, qemu_irq *pic)
{
    int i;
    hwaddr size = vms->memmap[VIRT_MMIO].size;

    /* We create the transports in forwards order. Since qbus_realize()
     * prepends (not appends) new child buses, the incrementing loop below will
     * create a list of virtio-mmio buses with decreasing base addresses.
     *
     * When a -device option is processed from the command line,
     * qbus_find_recursive() picks the next free virtio-mmio bus in forwards
     * order. The upshot is that -device options in increasing command line
     * order are mapped to virtio-mmio buses with decreasing base addresses.
     *
     * When this code was originally written, that arrangement ensured that the
     * guest Linux kernel would give the lowest "name" (/dev/vda, eth0, etc) to
     * the first -device on the command line. (The end-to-end order is a
     * function of this loop, qbus_realize(), qbus_find_recursive(), and the
     * guest kernel's name-to-address assignment strategy.)
     *
     * Meanwhile, the kernel's traversal seems to have been reversed; see eg.
     * the message, if not necessarily the code, of commit 70161ff336.
     * Therefore the loop now establishes the inverse of the original intent.
     *
     * Unfortunately, we can't counteract the kernel change by reversing the
     * loop; it would break existing command lines.
     *
     * In any case, the kernel makes no guarantee about the stability of
     * enumeration order of virtio devices (as demonstrated by it changing
     * between kernel versions). For reliable and stable identification
     * of disks users must use UUIDs or similar mechanisms.
     */
    for (i = 0; i < NUM_VIRTIO_TRANSPORTS; i++) {
        int irq = vms->irqmap[VIRT_MMIO] + i;
        hwaddr base = vms->memmap[VIRT_MMIO].base + i * size;

        sysbus_create_simple("virtio-mmio", base, pic[irq]);
    }

    /* We add dtb nodes in reverse order so that they appear in the finished
     * device tree lowest address first.
     *
     * Note that this mapping is independent of the loop above. The previous
     * loop influences virtio device to virtio transport assignment, whereas
     * this loop controls how virtio transports are laid out in the dtb.
     */
    for (i = NUM_VIRTIO_TRANSPORTS - 1; i >= 0; i--) {
        char *nodename;
        int irq = vms->irqmap[VIRT_MMIO] + i;
        hwaddr base = vms->memmap[VIRT_MMIO].base + i * size;

        nodename = g_strdup_printf("/virtio_mmio@%" PRIx64, base);
        qemu_fdt_add_subnode(vms->fdt, nodename);
        qemu_fdt_setprop_string(vms->fdt, nodename,
                                "compatible", "virtio,mmio");
        qemu_fdt_setprop_sized_cells(vms->fdt, nodename, "reg",
                                     2, base, 2, size);
        qemu_fdt_setprop_cells(vms->fdt, nodename, "interrupts",
                               GIC_FDT_IRQ_TYPE_SPI, irq,
                               GIC_FDT_IRQ_FLAGS_EDGE_LO_HI);
        qemu_fdt_setprop(vms->fdt, nodename, "dma-coherent", NULL, 0);
        g_free(nodename);
    }
}

#define VIRT_FLASH_SECTOR_SIZE (256 * KiB)

static PFlashCFI01 *virt_flash_create1(VirtMachineState *vms,
                                        const char *name,
                                        const char *alias_prop_name)
{
    /*
     * Create a single flash device.  We use the same parameters as
     * the flash devices on the Versatile Express board.
     */
    DeviceState *dev = qdev_create(NULL, TYPE_PFLASH_CFI01);

    qdev_prop_set_uint64(dev, "sector-length", VIRT_FLASH_SECTOR_SIZE);
    qdev_prop_set_uint8(dev, "width", 4);
    qdev_prop_set_uint8(dev, "device-width", 2);
    qdev_prop_set_bit(dev, "big-endian", false);
    qdev_prop_set_uint16(dev, "id0", 0x89);
    qdev_prop_set_uint16(dev, "id1", 0x18);
    qdev_prop_set_uint16(dev, "id2", 0x00);
    qdev_prop_set_uint16(dev, "id3", 0x00);
    qdev_prop_set_string(dev, "name", name);
    object_property_add_child(OBJECT(vms), name, OBJECT(dev),
                              &error_abort);
    object_property_add_alias(OBJECT(vms), alias_prop_name,
                              OBJECT(dev), "drive", &error_abort);
    return PFLASH_CFI01(dev);
}

static void virt_flash_create(VirtMachineState *vms)
{
    vms->flash[0] = virt_flash_create1(vms, "virt.flash0", "pflash0");
    vms->flash[1] = virt_flash_create1(vms, "virt.flash1", "pflash1");
}

static void virt_flash_map1(PFlashCFI01 *flash,
                            hwaddr base, hwaddr size,
                            MemoryRegion *sysmem)
{
    DeviceState *dev = DEVICE(flash);

    assert(size % VIRT_FLASH_SECTOR_SIZE == 0);
    assert(size / VIRT_FLASH_SECTOR_SIZE <= UINT32_MAX);
    qdev_prop_set_uint32(dev, "num-blocks", size / VIRT_FLASH_SECTOR_SIZE);
    qdev_init_nofail(dev);

    memory_region_add_subregion(sysmem, base,
                                sysbus_mmio_get_region(SYS_BUS_DEVICE(dev),
                                                       0));
}

static void virt_flash_map(VirtMachineState *vms,
                           MemoryRegion *sysmem,
                           MemoryRegion *secure_sysmem)
{
    /*
     * Map two flash devices to fill the VIRT_FLASH space in the memmap.
     * sysmem is the system memory space. secure_sysmem is the secure view
     * of the system, and the first flash device should be made visible only
     * there. The second flash device is visible to both secure and nonsecure.
     * If sysmem == secure_sysmem this means there is no separate Secure
     * address space and both flash devices are generally visible.
     */
    hwaddr flashsize = vms->memmap[VIRT_FLASH].size / 2;
    hwaddr flashbase = vms->memmap[VIRT_FLASH].base;

    virt_flash_map1(vms->flash[0], flashbase, flashsize,
                    secure_sysmem);
    virt_flash_map1(vms->flash[1], flashbase + flashsize, flashsize,
                    sysmem);
}

static void virt_flash_fdt(VirtMachineState *vms,
                           MemoryRegion *sysmem,
                           MemoryRegion *secure_sysmem)
{
    hwaddr flashsize = vms->memmap[VIRT_FLASH].size / 2;
    hwaddr flashbase = vms->memmap[VIRT_FLASH].base;
    char *nodename;

    if (sysmem == secure_sysmem) {
        /* Report both flash devices as a single node in the DT */
        nodename = g_strdup_printf("/flash@%" PRIx64, flashbase);
        qemu_fdt_add_subnode(vms->fdt, nodename);
        qemu_fdt_setprop_string(vms->fdt, nodename, "compatible", "cfi-flash");
        qemu_fdt_setprop_sized_cells(vms->fdt, nodename, "reg",
                                     2, flashbase, 2, flashsize,
                                     2, flashbase + flashsize, 2, flashsize);
        qemu_fdt_setprop_cell(vms->fdt, nodename, "bank-width", 4);
        g_free(nodename);
    } else {
        /*
         * Report the devices as separate nodes so we can mark one as
         * only visible to the secure world.
         */
        nodename = g_strdup_printf("/secflash@%" PRIx64, flashbase);
        qemu_fdt_add_subnode(vms->fdt, nodename);
        qemu_fdt_setprop_string(vms->fdt, nodename, "compatible", "cfi-flash");
        qemu_fdt_setprop_sized_cells(vms->fdt, nodename, "reg",
                                     2, flashbase, 2, flashsize);
        qemu_fdt_setprop_cell(vms->fdt, nodename, "bank-width", 4);
        qemu_fdt_setprop_string(vms->fdt, nodename, "status", "disabled");
        qemu_fdt_setprop_string(vms->fdt, nodename, "secure-status", "okay");
        g_free(nodename);

        nodename = g_strdup_printf("/flash@%" PRIx64, flashbase);
        qemu_fdt_add_subnode(vms->fdt, nodename);
        qemu_fdt_setprop_string(vms->fdt, nodename, "compatible", "cfi-flash");
        qemu_fdt_setprop_sized_cells(vms->fdt, nodename, "reg",
                                     2, flashbase + flashsize, 2, flashsize);
        qemu_fdt_setprop_cell(vms->fdt, nodename, "bank-width", 4);
        g_free(nodename);
    }
}

static bool virt_firmware_init(VirtMachineState *vms,
                               MemoryRegion *sysmem,
                               MemoryRegion *secure_sysmem)
{
    int i;
    BlockBackend *pflash_blk0;

    /* Map legacy -drive if=pflash to machine properties */
    for (i = 0; i < ARRAY_SIZE(vms->flash); i++) {
        pflash_cfi01_legacy_drive(vms->flash[i],
                                  drive_get(IF_PFLASH, 0, i));
    }

    virt_flash_map(vms, sysmem, secure_sysmem);

    pflash_blk0 = pflash_cfi01_get_blk(vms->flash[0]);

    if (bios_name) {
        char *fname;
        MemoryRegion *mr;
        int image_size;

        if (pflash_blk0) {
            error_report("The contents of the first flash device may be "
                         "specified with -bios or with -drive if=pflash... "
                         "but you cannot use both options at once");
            exit(1);
        }

        /* Fall back to -bios */

        fname = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
        if (!fname) {
            error_report("Could not find ROM image '%s'", bios_name);
            exit(1);
        }
        mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(vms->flash[0]), 0);
        image_size = load_image_mr(fname, mr);
        g_free(fname);
        if (image_size < 0) {
            error_report("Could not load ROM image '%s'", bios_name);
            exit(1);
        }
    }

    return pflash_blk0 || bios_name;
}

static FWCfgState *create_fw_cfg(const VirtMachineState *vms, AddressSpace *as)
{
    MachineState *ms = MACHINE(vms);
    hwaddr base = vms->memmap[VIRT_FW_CFG].base;
    hwaddr size = vms->memmap[VIRT_FW_CFG].size;
    FWCfgState *fw_cfg;
    char *nodename;

    fw_cfg = fw_cfg_init_mem_wide(base + 8, base, 8, base + 16, as);
    fw_cfg_add_i16(fw_cfg, FW_CFG_NB_CPUS, (uint16_t)ms->smp.cpus);

    nodename = g_strdup_printf("/fw-cfg@%" PRIx64, base);
    qemu_fdt_add_subnode(vms->fdt, nodename);
    qemu_fdt_setprop_string(vms->fdt, nodename,
                            "compatible", "qemu,fw-cfg-mmio");
    qemu_fdt_setprop_sized_cells(vms->fdt, nodename, "reg",
                                 2, base, 2, size);
    qemu_fdt_setprop(vms->fdt, nodename, "dma-coherent", NULL, 0);
    g_free(nodename);
    return fw_cfg;
}

static void create_pcie_irq_map(const VirtMachineState *vms,
                                uint32_t gic_phandle,
                                int first_irq, const char *nodename)
{
    int devfn, pin;
    uint32_t full_irq_map[4 * 4 * 10] = { 0 };
    uint32_t *irq_map = full_irq_map;

    for (devfn = 0; devfn <= 0x18; devfn += 0x8) {
        for (pin = 0; pin < 4; pin++) {
            int irq_type = GIC_FDT_IRQ_TYPE_SPI;
            int irq_nr = first_irq + ((pin + PCI_SLOT(devfn)) % PCI_NUM_PINS);
            int irq_level = GIC_FDT_IRQ_FLAGS_LEVEL_HI;
            int i;

            uint32_t map[] = {
                devfn << 8, 0, 0,                           /* devfn */
                pin + 1,                                    /* PCI pin */
                gic_phandle, 0, 0, irq_type, irq_nr, irq_level }; /* GIC irq */

            /* Convert map to big endian */
            for (i = 0; i < 10; i++) {
                irq_map[i] = cpu_to_be32(map[i]);
            }
            irq_map += 10;
        }
    }

    qemu_fdt_setprop(vms->fdt, nodename, "interrupt-map",
                     full_irq_map, sizeof(full_irq_map));

    qemu_fdt_setprop_cells(vms->fdt, nodename, "interrupt-map-mask",
                           0x1800, 0, 0, /* devfn (PCI_SLOT(3)) */
                           0x7           /* PCI irq */);
}

static void create_smmu(const VirtMachineState *vms, qemu_irq *pic,
                        PCIBus *bus)
{
    char *node;
    const char compat[] = "arm,smmu-v3";
    int irq =  vms->irqmap[VIRT_SMMU];
    int i;
    hwaddr base = vms->memmap[VIRT_SMMU].base;
    hwaddr size = vms->memmap[VIRT_SMMU].size;
    const char irq_names[] = "eventq\0priq\0cmdq-sync\0gerror";
    DeviceState *dev;

    if (vms->iommu != VIRT_IOMMU_SMMUV3 || !vms->iommu_phandle) {
        return;
    }

    dev = qdev_create(NULL, "arm-smmuv3");

    object_property_set_link(OBJECT(dev), OBJECT(bus), "primary-bus",
                             &error_abort);
    qdev_init_nofail(dev);
    sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, base);
    for (i = 0; i < NUM_SMMU_IRQS; i++) {
        sysbus_connect_irq(SYS_BUS_DEVICE(dev), i, pic[irq + i]);
    }

    node = g_strdup_printf("/smmuv3@%" PRIx64, base);
    qemu_fdt_add_subnode(vms->fdt, node);
    qemu_fdt_setprop(vms->fdt, node, "compatible", compat, sizeof(compat));
    qemu_fdt_setprop_sized_cells(vms->fdt, node, "reg", 2, base, 2, size);

    qemu_fdt_setprop_cells(vms->fdt, node, "interrupts",
            GIC_FDT_IRQ_TYPE_SPI, irq    , GIC_FDT_IRQ_FLAGS_EDGE_LO_HI,
            GIC_FDT_IRQ_TYPE_SPI, irq + 1, GIC_FDT_IRQ_FLAGS_EDGE_LO_HI,
            GIC_FDT_IRQ_TYPE_SPI, irq + 2, GIC_FDT_IRQ_FLAGS_EDGE_LO_HI,
            GIC_FDT_IRQ_TYPE_SPI, irq + 3, GIC_FDT_IRQ_FLAGS_EDGE_LO_HI);

    qemu_fdt_setprop(vms->fdt, node, "interrupt-names", irq_names,
                     sizeof(irq_names));

    qemu_fdt_setprop_cell(vms->fdt, node, "clocks", vms->clock_phandle);
    qemu_fdt_setprop_string(vms->fdt, node, "clock-names", "apb_pclk");
    qemu_fdt_setprop(vms->fdt, node, "dma-coherent", NULL, 0);

    qemu_fdt_setprop_cell(vms->fdt, node, "#iommu-cells", 1);

    qemu_fdt_setprop_cell(vms->fdt, node, "phandle", vms->iommu_phandle);
    g_free(node);
}

static void create_pcie(VirtMachineState *vms, qemu_irq *pic)
{
    hwaddr base_mmio = vms->memmap[VIRT_PCIE_MMIO].base;
    hwaddr size_mmio = vms->memmap[VIRT_PCIE_MMIO].size;
    hwaddr base_mmio_high = vms->memmap[VIRT_HIGH_PCIE_MMIO].base;
    hwaddr size_mmio_high = vms->memmap[VIRT_HIGH_PCIE_MMIO].size;
    hwaddr base_pio = vms->memmap[VIRT_PCIE_PIO].base;
    hwaddr size_pio = vms->memmap[VIRT_PCIE_PIO].size;
    hwaddr base_ecam, size_ecam;
    hwaddr base = base_mmio;
    int nr_pcie_buses;
    int irq = vms->irqmap[VIRT_PCIE];
    MemoryRegion *mmio_alias;
    MemoryRegion *mmio_reg;
    MemoryRegion *ecam_alias;
    MemoryRegion *ecam_reg;
    DeviceState *dev;
    char *nodename;
    int i, ecam_id;
    PCIHostState *pci;

    dev = qdev_create(NULL, TYPE_GPEX_HOST);
    qdev_init_nofail(dev);

    ecam_id = VIRT_ECAM_ID(vms->highmem_ecam);
    base_ecam = vms->memmap[ecam_id].base;
    size_ecam = vms->memmap[ecam_id].size;
    nr_pcie_buses = size_ecam / PCIE_MMCFG_SIZE_MIN;
    /* Map only the first size_ecam bytes of ECAM space */
    ecam_alias = g_new0(MemoryRegion, 1);
    ecam_reg = sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), 0);
    memory_region_init_alias(ecam_alias, OBJECT(dev), "pcie-ecam",
                             ecam_reg, 0, size_ecam);
    memory_region_add_subregion(get_system_memory(), base_ecam, ecam_alias);

    /* Map the MMIO window into system address space so as to expose
     * the section of PCI MMIO space which starts at the same base address
     * (ie 1:1 mapping for that part of PCI MMIO space visible through
     * the window).
     */
    mmio_alias = g_new0(MemoryRegion, 1);
    mmio_reg = sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), 1);
    memory_region_init_alias(mmio_alias, OBJECT(dev), "pcie-mmio",
                             mmio_reg, base_mmio, size_mmio);
    memory_region_add_subregion(get_system_memory(), base_mmio, mmio_alias);

    if (vms->highmem) {
        /* Map high MMIO space */
        MemoryRegion *high_mmio_alias = g_new0(MemoryRegion, 1);

        memory_region_init_alias(high_mmio_alias, OBJECT(dev), "pcie-mmio-high",
                                 mmio_reg, base_mmio_high, size_mmio_high);
        memory_region_add_subregion(get_system_memory(), base_mmio_high,
                                    high_mmio_alias);
    }

    /* Map IO port space */
    sysbus_mmio_map(SYS_BUS_DEVICE(dev), 2, base_pio);

    for (i = 0; i < GPEX_NUM_IRQS; i++) {
        sysbus_connect_irq(SYS_BUS_DEVICE(dev), i, pic[irq + i]);
        gpex_set_irq_num(GPEX_HOST(dev), i, irq + i);
    }

    pci = PCI_HOST_BRIDGE(dev);
    if (pci->bus) {
        for (i = 0; i < nb_nics; i++) {
            NICInfo *nd = &nd_table[i];

            if (!nd->model) {
                nd->model = g_strdup("virtio");
            }

            pci_nic_init_nofail(nd, pci->bus, nd->model, NULL);
        }
    }

    nodename = g_strdup_printf("/pcie@%" PRIx64, base);
    qemu_fdt_add_subnode(vms->fdt, nodename);
    qemu_fdt_setprop_string(vms->fdt, nodename,
                            "compatible", "pci-host-ecam-generic");
    qemu_fdt_setprop_string(vms->fdt, nodename, "device_type", "pci");
    qemu_fdt_setprop_cell(vms->fdt, nodename, "#address-cells", 3);
    qemu_fdt_setprop_cell(vms->fdt, nodename, "#size-cells", 2);
    qemu_fdt_setprop_cell(vms->fdt, nodename, "linux,pci-domain", 0);
    qemu_fdt_setprop_cells(vms->fdt, nodename, "bus-range", 0,
                           nr_pcie_buses - 1);
    qemu_fdt_setprop(vms->fdt, nodename, "dma-coherent", NULL, 0);

    if (vms->msi_phandle) {
        qemu_fdt_setprop_cells(vms->fdt, nodename, "msi-parent",
                               vms->msi_phandle);
    }

    qemu_fdt_setprop_sized_cells(vms->fdt, nodename, "reg",
                                 2, base_ecam, 2, size_ecam);

    if (vms->highmem) {
        qemu_fdt_setprop_sized_cells(vms->fdt, nodename, "ranges",
                                     1, FDT_PCI_RANGE_IOPORT, 2, 0,
                                     2, base_pio, 2, size_pio,
                                     1, FDT_PCI_RANGE_MMIO, 2, base_mmio,
                                     2, base_mmio, 2, size_mmio,
                                     1, FDT_PCI_RANGE_MMIO_64BIT,
                                     2, base_mmio_high,
                                     2, base_mmio_high, 2, size_mmio_high);
    } else {
        qemu_fdt_setprop_sized_cells(vms->fdt, nodename, "ranges",
                                     1, FDT_PCI_RANGE_IOPORT, 2, 0,
                                     2, base_pio, 2, size_pio,
                                     1, FDT_PCI_RANGE_MMIO, 2, base_mmio,
                                     2, base_mmio, 2, size_mmio);
    }

    qemu_fdt_setprop_cell(vms->fdt, nodename, "#interrupt-cells", 1);
    create_pcie_irq_map(vms, vms->gic_phandle, irq, nodename);

    if (vms->iommu) {
        vms->iommu_phandle = qemu_fdt_alloc_phandle(vms->fdt);

        create_smmu(vms, pic, pci->bus);

        qemu_fdt_setprop_cells(vms->fdt, nodename, "iommu-map",
                               0x0, vms->iommu_phandle, 0x0, 0x10000);
    }

    g_free(nodename);
}

static void create_platform_bus(VirtMachineState *vms, qemu_irq *pic)
{
    DeviceState *dev;
    SysBusDevice *s;
    int i;
    MemoryRegion *sysmem = get_system_memory();

    dev = qdev_create(NULL, TYPE_PLATFORM_BUS_DEVICE);
    dev->id = TYPE_PLATFORM_BUS_DEVICE;
    qdev_prop_set_uint32(dev, "num_irqs", PLATFORM_BUS_NUM_IRQS);
    qdev_prop_set_uint32(dev, "mmio_size", vms->memmap[VIRT_PLATFORM_BUS].size);
    qdev_init_nofail(dev);
    vms->platform_bus_dev = dev;

    s = SYS_BUS_DEVICE(dev);
    for (i = 0; i < PLATFORM_BUS_NUM_IRQS; i++) {
        int irqn = vms->irqmap[VIRT_PLATFORM_BUS] + i;
        sysbus_connect_irq(s, i, pic[irqn]);
    }

    memory_region_add_subregion(sysmem,
                                vms->memmap[VIRT_PLATFORM_BUS].base,
                                sysbus_mmio_get_region(s, 0));
}

static void create_secure_ram(VirtMachineState *vms,
                              MemoryRegion *secure_sysmem)
{
    MemoryRegion *secram = g_new(MemoryRegion, 1);
    char *nodename;
    hwaddr base = vms->memmap[VIRT_SECURE_MEM].base;
    hwaddr size = vms->memmap[VIRT_SECURE_MEM].size;

    memory_region_init_ram(secram, NULL, "virt.secure-ram", size,
                           &error_fatal);
    memory_region_add_subregion(secure_sysmem, base, secram);

    nodename = g_strdup_printf("/secram@%" PRIx64, base);
    qemu_fdt_add_subnode(vms->fdt, nodename);
    qemu_fdt_setprop_string(vms->fdt, nodename, "device_type", "memory");
    qemu_fdt_setprop_sized_cells(vms->fdt, nodename, "reg", 2, base, 2, size);
    qemu_fdt_setprop_string(vms->fdt, nodename, "status", "disabled");
    qemu_fdt_setprop_string(vms->fdt, nodename, "secure-status", "okay");

    g_free(nodename);
}

static void *machvirt_dtb(const struct arm_boot_info *binfo, int *fdt_size)
{
    const VirtMachineState *board = container_of(binfo, VirtMachineState,
                                                 bootinfo);

    *fdt_size = board->fdt_size;
    return board->fdt;
}

static void virt_build_smbios(VirtMachineState *vms)
{
    MachineClass *mc = MACHINE_GET_CLASS(vms);
    VirtMachineClass *vmc = VIRT_MACHINE_GET_CLASS(vms);
    uint8_t *smbios_tables, *smbios_anchor;
    size_t smbios_tables_len, smbios_anchor_len;
    const char *product = "QEMU Virtual Machine";

    if (kvm_enabled()) {
        product = "KVM Virtual Machine";
    }

    smbios_set_defaults("QEMU", product,
                        vmc->smbios_old_sys_ver ? "1.0" : mc->name, false,
                        true, SMBIOS_ENTRY_POINT_30);

    smbios_get_tables(MACHINE(vms), NULL, 0, &smbios_tables, &smbios_tables_len,
                      &smbios_anchor, &smbios_anchor_len);

    if (smbios_anchor) {
        fw_cfg_add_file(vms->fw_cfg, "etc/smbios/smbios-tables",
                        smbios_tables, smbios_tables_len);
        fw_cfg_add_file(vms->fw_cfg, "etc/smbios/smbios-anchor",
                        smbios_anchor, smbios_anchor_len);
    }
}

static
void virt_machine_done(Notifier *notifier, void *data)
{
    VirtMachineState *vms = container_of(notifier, VirtMachineState,
                                         machine_done);
    MachineState *ms = MACHINE(vms);
    ARMCPU *cpu = ARM_CPU(first_cpu);
    struct arm_boot_info *info = &vms->bootinfo;
    AddressSpace *as = arm_boot_address_space(cpu, info);

    /*
     * If the user provided a dtb, we assume the dynamic sysbus nodes
     * already are integrated there. This corresponds to a use case where
     * the dynamic sysbus nodes are complex and their generation is not yet
     * supported. In that case the user can take charge of the guest dt
     * while qemu takes charge of the qom stuff.
     */
    if (info->dtb_filename == NULL) {
        platform_bus_add_all_fdt_nodes(vms->fdt, "/intc",
                                       vms->memmap[VIRT_PLATFORM_BUS].base,
                                       vms->memmap[VIRT_PLATFORM_BUS].size,
                                       vms->irqmap[VIRT_PLATFORM_BUS]);
    }
    if (arm_load_dtb(info->dtb_start, info, info->dtb_limit, as, ms) < 0) {
        exit(1);
    }

    virt_acpi_setup(vms);
    virt_build_smbios(vms);
}

static uint64_t virt_cpu_mp_affinity(VirtMachineState *vms, int idx)
{
    uint8_t clustersz = ARM_DEFAULT_CPUS_PER_CLUSTER;
    VirtMachineClass *vmc = VIRT_MACHINE_GET_CLASS(vms);

    if (!vmc->disallow_affinity_adjustment) {
        /* Adjust MPIDR like 64-bit KVM hosts, which incorporate the
         * GIC's target-list limitations. 32-bit KVM hosts currently
         * always create clusters of 4 CPUs, but that is expected to
         * change when they gain support for gicv3. When KVM is enabled
         * it will override the changes we make here, therefore our
         * purposes are to make TCG consistent (with 64-bit KVM hosts)
         * and to improve SGI efficiency.
         */
        if (vms->gic_version == 3) {
            clustersz = GICV3_TARGETLIST_BITS;
        } else {
            clustersz = GIC_TARGETLIST_BITS;
        }
    }
    return arm_cpu_mp_affinity(idx, clustersz);
}

static void virt_set_memmap(VirtMachineState *vms)
{
    MachineState *ms = MACHINE(vms);
    hwaddr base, device_memory_base, device_memory_size;
    int i;

    vms->memmap = extended_memmap;

    for (i = 0; i < ARRAY_SIZE(base_memmap); i++) {
        vms->memmap[i] = base_memmap[i];
    }

    if (ms->ram_slots > ACPI_MAX_RAM_SLOTS) {
        error_report("unsupported number of memory slots: %"PRIu64,
                     ms->ram_slots);
        exit(EXIT_FAILURE);
    }

    /*
     * We compute the base of the high IO region depending on the
     * amount of initial and device memory. The device memory start/size
     * is aligned on 1GiB. We never put the high IO region below 256GiB
     * so that if maxram_size is < 255GiB we keep the legacy memory map.
     * The device region size assumes 1GiB page max alignment per slot.
     */
    device_memory_base =
        ROUND_UP(vms->memmap[VIRT_MEM].base + ms->ram_size, GiB);
    device_memory_size = ms->maxram_size - ms->ram_size + ms->ram_slots * GiB;

    /* Base address of the high IO region */
    base = device_memory_base + ROUND_UP(device_memory_size, GiB);
    if (base < device_memory_base) {
        error_report("maxmem/slots too huge");
        exit(EXIT_FAILURE);
    }
    if (base < vms->memmap[VIRT_MEM].base + LEGACY_RAMLIMIT_BYTES) {
        base = vms->memmap[VIRT_MEM].base + LEGACY_RAMLIMIT_BYTES;
    }

    for (i = VIRT_LOWMEMMAP_LAST; i < ARRAY_SIZE(extended_memmap); i++) {
        hwaddr size = extended_memmap[i].size;

        base = ROUND_UP(base, size);
        vms->memmap[i].base = base;
        vms->memmap[i].size = size;
        base += size;
    }
    vms->highest_gpa = base - 1;
    if (device_memory_size > 0) {
        ms->device_memory = g_malloc0(sizeof(*ms->device_memory));
        ms->device_memory->base = device_memory_base;
        memory_region_init(&ms->device_memory->mr, OBJECT(vms),
                           "device-memory", device_memory_size);
    }
}

static void machvirt_init(MachineState *machine)
{
    VirtMachineState *vms = VIRT_MACHINE(machine);
    VirtMachineClass *vmc = VIRT_MACHINE_GET_CLASS(machine);
    MachineClass *mc = MACHINE_GET_CLASS(machine);
    const CPUArchIdList *possible_cpus;
    qemu_irq pic[NUM_IRQS];
    MemoryRegion *sysmem = get_system_memory();
    MemoryRegion *secure_sysmem = NULL;
    int n, virt_max_cpus;
    MemoryRegion *ram = g_new(MemoryRegion, 1);
    bool firmware_loaded;
    bool aarch64 = true;
    bool has_ged = !vmc->no_ged;
    unsigned int smp_cpus = machine->smp.cpus;
    unsigned int max_cpus = machine->smp.max_cpus;

    /*
     * In accelerated mode, the memory map is computed earlier in kvm_type()
     * to create a VM with the right number of IPA bits.
     */
    if (!vms->memmap) {
        virt_set_memmap(vms);
    }

    /* We can probe only here because during property set
     * KVM is not available yet
     */
    if (vms->gic_version <= 0) {
        /* "host" or "max" */
        if (!kvm_enabled()) {
            if (vms->gic_version == 0) {
                error_report("gic-version=host requires KVM");
                exit(1);
            } else {
                /* "max": currently means 3 for TCG */
                vms->gic_version = 3;
            }
        } else {
            vms->gic_version = kvm_arm_vgic_probe();
            if (!vms->gic_version) {
                error_report(
                    "Unable to determine GIC version supported by host");
                exit(1);
            }
        }
    }

    if (!cpu_type_valid(machine->cpu_type)) {
        error_report("mach-virt: CPU type %s not supported", machine->cpu_type);
        exit(1);
    }

    if (vms->secure) {
        if (kvm_enabled()) {
            error_report("mach-virt: KVM does not support Security extensions");
            exit(1);
        }

        /*
         * The Secure view of the world is the same as the NonSecure,
         * but with a few extra devices. Create it as a container region
         * containing the system memory at low priority; any secure-only
         * devices go in at higher priority and take precedence.
         */
        secure_sysmem = g_new(MemoryRegion, 1);
        memory_region_init(secure_sysmem, OBJECT(machine), "secure-memory",
                           UINT64_MAX);
        memory_region_add_subregion_overlap(secure_sysmem, 0, sysmem, -1);
    }

    firmware_loaded = virt_firmware_init(vms, sysmem,
                                         secure_sysmem ?: sysmem);

    /* If we have an EL3 boot ROM then the assumption is that it will
     * implement PSCI itself, so disable QEMU's internal implementation
     * so it doesn't get in the way. Instead of starting secondary
     * CPUs in PSCI powerdown state we will start them all running and
     * let the boot ROM sort them out.
     * The usual case is that we do use QEMU's PSCI implementation;
     * if the guest has EL2 then we will use SMC as the conduit,
     * and otherwise we will use HVC (for backwards compatibility and
     * because if we're using KVM then we must use HVC).
     */
    if (vms->secure && firmware_loaded) {
        vms->psci_conduit = QEMU_PSCI_CONDUIT_DISABLED;
    } else if (vms->virt) {
        vms->psci_conduit = QEMU_PSCI_CONDUIT_SMC;
    } else {
        vms->psci_conduit = QEMU_PSCI_CONDUIT_HVC;
    }

    /* The maximum number of CPUs depends on the GIC version, or on how
     * many redistributors we can fit into the memory map.
     */
    if (vms->gic_version == 3) {
        virt_max_cpus =
            vms->memmap[VIRT_GIC_REDIST].size / GICV3_REDIST_SIZE;
        virt_max_cpus +=
            vms->memmap[VIRT_HIGH_GIC_REDIST2].size / GICV3_REDIST_SIZE;
    } else {
        virt_max_cpus = GIC_NCPU;
    }

    if (max_cpus > virt_max_cpus) {
        error_report("Number of SMP CPUs requested (%d) exceeds max CPUs "
                     "supported by machine 'mach-virt' (%d)",
                     max_cpus, virt_max_cpus);
        exit(1);
    }

    vms->smp_cpus = smp_cpus;

    if (vms->virt && kvm_enabled()) {
        error_report("mach-virt: KVM does not support providing "
                     "Virtualization extensions to the guest CPU");
        exit(1);
    }

    create_fdt(vms);

    possible_cpus = mc->possible_cpu_arch_ids(machine);
    for (n = 0; n < possible_cpus->len; n++) {
        Object *cpuobj;
        CPUState *cs;

        if (n >= smp_cpus) {
            break;
        }

        cpuobj = object_new(possible_cpus->cpus[n].type);
        object_property_set_int(cpuobj, possible_cpus->cpus[n].arch_id,
                                "mp-affinity", NULL);

        cs = CPU(cpuobj);
        cs->cpu_index = n;

        numa_cpu_pre_plug(&possible_cpus->cpus[cs->cpu_index], DEVICE(cpuobj),
                          &error_fatal);

        aarch64 &= object_property_get_bool(cpuobj, "aarch64", NULL);

        if (!vms->secure) {
            object_property_set_bool(cpuobj, false, "has_el3", NULL);
        }

        if (!vms->virt && object_property_find(cpuobj, "has_el2", NULL)) {
            object_property_set_bool(cpuobj, false, "has_el2", NULL);
        }

        if (vms->psci_conduit != QEMU_PSCI_CONDUIT_DISABLED) {
            object_property_set_int(cpuobj, vms->psci_conduit,
                                    "psci-conduit", NULL);

            /* Secondary CPUs start in PSCI powered-down state */
            if (n > 0) {
                object_property_set_bool(cpuobj, true,
                                         "start-powered-off", NULL);
            }
        }

        if (vmc->no_pmu && object_property_find(cpuobj, "pmu", NULL)) {
            object_property_set_bool(cpuobj, false, "pmu", NULL);
        }

        if (object_property_find(cpuobj, "reset-cbar", NULL)) {
            object_property_set_int(cpuobj, vms->memmap[VIRT_CPUPERIPHS].base,
                                    "reset-cbar", &error_abort);
        }

        object_property_set_link(cpuobj, OBJECT(sysmem), "memory",
                                 &error_abort);
        if (vms->secure) {
            object_property_set_link(cpuobj, OBJECT(secure_sysmem),
                                     "secure-memory", &error_abort);
        }

        object_property_set_bool(cpuobj, true, "realized", &error_fatal);
        object_unref(cpuobj);
    }
    fdt_add_timer_nodes(vms);
    fdt_add_cpu_nodes(vms);

   if (!kvm_enabled()) {
        ARMCPU *cpu = ARM_CPU(first_cpu);
        bool aarch64 = object_property_get_bool(OBJECT(cpu), "aarch64", NULL);

        if (aarch64 && vms->highmem) {
            int requested_pa_size, pamax = arm_pamax(cpu);

            requested_pa_size = 64 - clz64(vms->highest_gpa);
            if (pamax < requested_pa_size) {
                error_report("VCPU supports less PA bits (%d) than requested "
                            "by the memory map (%d)", pamax, requested_pa_size);
                exit(1);
            }
        }
    }

    memory_region_allocate_system_memory(ram, NULL, "mach-virt.ram",
                                         machine->ram_size);
    memory_region_add_subregion(sysmem, vms->memmap[VIRT_MEM].base, ram);
    if (machine->device_memory) {
        memory_region_add_subregion(sysmem, machine->device_memory->base,
                                    &machine->device_memory->mr);
    }

    virt_flash_fdt(vms, sysmem, secure_sysmem ?: sysmem);

    create_gic(vms, pic);

    fdt_add_pmu_nodes(vms);

    create_uart(vms, pic, VIRT_UART, sysmem, serial_hd(0));

    if (vms->secure) {
        create_secure_ram(vms, secure_sysmem);
        create_uart(vms, pic, VIRT_SECURE_UART, secure_sysmem, serial_hd(1));
    }

    vms->highmem_ecam &= vms->highmem && (!firmware_loaded || aarch64);

    create_rtc(vms, pic);

    create_pcie(vms, pic);

    create_gpio(vms, pic);

    if (has_ged && aarch64 && firmware_loaded && acpi_enabled) {
        vms->acpi_dev = create_acpi_ged(vms, pic);
    }

     /* connect powerdown request */
     vms->powerdown_notifier.notify = virt_powerdown_req;
     qemu_register_powerdown_notifier(&vms->powerdown_notifier);

    /* Create mmio transports, so the user can create virtio backends
     * (which will be automatically plugged in to the transports). If
     * no backend is created the transport will just sit harmlessly idle.
     */
    create_virtio_devices(vms, pic);

    vms->fw_cfg = create_fw_cfg(vms, &address_space_memory);
    rom_set_fw(vms->fw_cfg);

    create_platform_bus(vms, pic);

    vms->bootinfo.ram_size = machine->ram_size;
    vms->bootinfo.nb_cpus = smp_cpus;
    vms->bootinfo.board_id = -1;
    vms->bootinfo.loader_start = vms->memmap[VIRT_MEM].base;
    vms->bootinfo.get_dtb = machvirt_dtb;
    vms->bootinfo.skip_dtb_autoload = true;
    vms->bootinfo.firmware_loaded = firmware_loaded;
    arm_load_kernel(ARM_CPU(first_cpu), machine, &vms->bootinfo);

    vms->machine_done.notify = virt_machine_done;
    qemu_add_machine_init_done_notifier(&vms->machine_done);
}

static bool virt_get_secure(Object *obj, Error **errp)
{
    VirtMachineState *vms = VIRT_MACHINE(obj);

    return vms->secure;
}

static void virt_set_secure(Object *obj, bool value, Error **errp)
{
    VirtMachineState *vms = VIRT_MACHINE(obj);

    vms->secure = value;
}

static bool virt_get_virt(Object *obj, Error **errp)
{
    VirtMachineState *vms = VIRT_MACHINE(obj);

    return vms->virt;
}

static void virt_set_virt(Object *obj, bool value, Error **errp)
{
    VirtMachineState *vms = VIRT_MACHINE(obj);

    vms->virt = value;
}

static bool virt_get_highmem(Object *obj, Error **errp)
{
    VirtMachineState *vms = VIRT_MACHINE(obj);

    return vms->highmem;
}

static void virt_set_highmem(Object *obj, bool value, Error **errp)
{
    VirtMachineState *vms = VIRT_MACHINE(obj);

    vms->highmem = value;
}

static bool virt_get_its(Object *obj, Error **errp)
{
    VirtMachineState *vms = VIRT_MACHINE(obj);

    return vms->its;
}

static void virt_set_its(Object *obj, bool value, Error **errp)
{
    VirtMachineState *vms = VIRT_MACHINE(obj);

    vms->its = value;
}

static char *virt_get_gic_version(Object *obj, Error **errp)
{
    VirtMachineState *vms = VIRT_MACHINE(obj);
    const char *val = vms->gic_version == 3 ? "3" : "2";

    return g_strdup(val);
}

static void virt_set_gic_version(Object *obj, const char *value, Error **errp)
{
    VirtMachineState *vms = VIRT_MACHINE(obj);

    if (!strcmp(value, "3")) {
        vms->gic_version = 3;
    } else if (!strcmp(value, "2")) {
        vms->gic_version = 2;
    } else if (!strcmp(value, "host")) {
        vms->gic_version = 0; /* Will probe later */
    } else if (!strcmp(value, "max")) {
        vms->gic_version = -1; /* Will probe later */
    } else {
        error_setg(errp, "Invalid gic-version value");
        error_append_hint(errp, "Valid values are 3, 2, host, max.\n");
    }
}

static char *virt_get_iommu(Object *obj, Error **errp)
{
    VirtMachineState *vms = VIRT_MACHINE(obj);

    switch (vms->iommu) {
    case VIRT_IOMMU_NONE:
        return g_strdup("none");
    case VIRT_IOMMU_SMMUV3:
        return g_strdup("smmuv3");
    default:
        g_assert_not_reached();
    }
}

static void virt_set_iommu(Object *obj, const char *value, Error **errp)
{
    VirtMachineState *vms = VIRT_MACHINE(obj);

    if (!strcmp(value, "smmuv3")) {
        vms->iommu = VIRT_IOMMU_SMMUV3;
    } else if (!strcmp(value, "none")) {
        vms->iommu = VIRT_IOMMU_NONE;
    } else {
        error_setg(errp, "Invalid iommu value");
        error_append_hint(errp, "Valid values are none, smmuv3.\n");
    }
}

static CpuInstanceProperties
virt_cpu_index_to_props(MachineState *ms, unsigned cpu_index)
{
    MachineClass *mc = MACHINE_GET_CLASS(ms);
    const CPUArchIdList *possible_cpus = mc->possible_cpu_arch_ids(ms);

    assert(cpu_index < possible_cpus->len);
    return possible_cpus->cpus[cpu_index].props;
}

static int64_t virt_get_default_cpu_node_id(const MachineState *ms, int idx)
{
    return idx % ms->numa_state->num_nodes;
}

static const CPUArchIdList *virt_possible_cpu_arch_ids(MachineState *ms)
{
    int n;
    unsigned int max_cpus = ms->smp.max_cpus;
    VirtMachineState *vms = VIRT_MACHINE(ms);

    if (ms->possible_cpus) {
        assert(ms->possible_cpus->len == max_cpus);
        return ms->possible_cpus;
    }

    ms->possible_cpus = g_malloc0(sizeof(CPUArchIdList) +
                                  sizeof(CPUArchId) * max_cpus);
    ms->possible_cpus->len = max_cpus;
    for (n = 0; n < ms->possible_cpus->len; n++) {
        ms->possible_cpus->cpus[n].type = ms->cpu_type;
        ms->possible_cpus->cpus[n].arch_id =
            virt_cpu_mp_affinity(vms, n);
        ms->possible_cpus->cpus[n].props.has_thread_id = true;
        ms->possible_cpus->cpus[n].props.thread_id = n;
    }
    return ms->possible_cpus;
}

static void virt_memory_pre_plug(HotplugHandler *hotplug_dev, DeviceState *dev,
                                 Error **errp)
{
    VirtMachineState *vms = VIRT_MACHINE(hotplug_dev);
    const bool is_nvdimm = object_dynamic_cast(OBJECT(dev), TYPE_NVDIMM);

    if (is_nvdimm) {
        error_setg(errp, "nvdimm is not yet supported");
        return;
    }

    if (!vms->acpi_dev) {
        error_setg(errp,
                   "memory hotplug is not enabled: missing acpi-ged device");
        return;
    }

    pc_dimm_pre_plug(PC_DIMM(dev), MACHINE(hotplug_dev), NULL, errp);
}

static void virt_memory_plug(HotplugHandler *hotplug_dev,
                             DeviceState *dev, Error **errp)
{
    HotplugHandlerClass *hhc;
    VirtMachineState *vms = VIRT_MACHINE(hotplug_dev);
    Error *local_err = NULL;

    pc_dimm_plug(PC_DIMM(dev), MACHINE(vms), &local_err);
    if (local_err) {
        goto out;
    }

    hhc = HOTPLUG_HANDLER_GET_CLASS(vms->acpi_dev);
    hhc->plug(HOTPLUG_HANDLER(vms->acpi_dev), dev, &error_abort);
out:
    error_propagate(errp, local_err);
}

static void virt_machine_device_pre_plug_cb(HotplugHandler *hotplug_dev,
                                            DeviceState *dev, Error **errp)
{
    if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) {
        virt_memory_pre_plug(hotplug_dev, dev, errp);
    }
}

static void virt_machine_device_plug_cb(HotplugHandler *hotplug_dev,
                                        DeviceState *dev, Error **errp)
{
    VirtMachineState *vms = VIRT_MACHINE(hotplug_dev);

    if (vms->platform_bus_dev) {
        if (object_dynamic_cast(OBJECT(dev), TYPE_SYS_BUS_DEVICE)) {
            platform_bus_link_device(PLATFORM_BUS_DEVICE(vms->platform_bus_dev),
                                     SYS_BUS_DEVICE(dev));
        }
    }
    if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) {
        virt_memory_plug(hotplug_dev, dev, errp);
    }
}

static void virt_machine_device_unplug_request_cb(HotplugHandler *hotplug_dev,
                                          DeviceState *dev, Error **errp)
{
    error_setg(errp, "device unplug request for unsupported device"
               " type: %s", object_get_typename(OBJECT(dev)));
}

static HotplugHandler *virt_machine_get_hotplug_handler(MachineState *machine,
                                                        DeviceState *dev)
{
    if (object_dynamic_cast(OBJECT(dev), TYPE_SYS_BUS_DEVICE) ||
       (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM))) {
        return HOTPLUG_HANDLER(machine);
    }

    return NULL;
}

/*
 * for arm64 kvm_type [7-0] encodes the requested number of bits
 * in the IPA address space
 */
static int virt_kvm_type(MachineState *ms, const char *type_str)
{
    VirtMachineState *vms = VIRT_MACHINE(ms);
    int max_vm_pa_size = kvm_arm_get_max_vm_ipa_size(ms);
    int requested_pa_size;

    /* we freeze the memory map to compute the highest gpa */
    virt_set_memmap(vms);

    requested_pa_size = 64 - clz64(vms->highest_gpa);

    if (requested_pa_size > max_vm_pa_size) {
        error_report("-m and ,maxmem option values "
                     "require an IPA range (%d bits) larger than "
                     "the one supported by the host (%d bits)",
                     requested_pa_size, max_vm_pa_size);
       exit(1);
    }
    /*
     * By default we return 0 which corresponds to an implicit legacy
     * 40b IPA setting. Otherwise we return the actual requested PA
     * logsize
     */
    return requested_pa_size > 40 ? requested_pa_size : 0;
}

static void virt_machine_class_init(ObjectClass *oc, void *data)
{
    MachineClass *mc = MACHINE_CLASS(oc);
    HotplugHandlerClass *hc = HOTPLUG_HANDLER_CLASS(oc);

    mc->init = machvirt_init;
    /* Start with max_cpus set to 512, which is the maximum supported by KVM.
     * The value may be reduced later when we have more information about the
     * configuration of the particular instance.
     */
    mc->max_cpus = 512;
    machine_class_allow_dynamic_sysbus_dev(mc, TYPE_VFIO_CALXEDA_XGMAC);
    machine_class_allow_dynamic_sysbus_dev(mc, TYPE_VFIO_AMD_XGBE);
    machine_class_allow_dynamic_sysbus_dev(mc, TYPE_RAMFB_DEVICE);
    machine_class_allow_dynamic_sysbus_dev(mc, TYPE_VFIO_PLATFORM);
    mc->block_default_type = IF_VIRTIO;
    mc->no_cdrom = 1;
    mc->pci_allow_0_address = true;
    /* We know we will never create a pre-ARMv7 CPU which needs 1K pages */
    mc->minimum_page_bits = 12;
    mc->possible_cpu_arch_ids = virt_possible_cpu_arch_ids;
    mc->cpu_index_to_instance_props = virt_cpu_index_to_props;
    mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-a15");
    mc->get_default_cpu_node_id = virt_get_default_cpu_node_id;
    mc->kvm_type = virt_kvm_type;
    assert(!mc->get_hotplug_handler);
    mc->get_hotplug_handler = virt_machine_get_hotplug_handler;
    hc->pre_plug = virt_machine_device_pre_plug_cb;
    hc->plug = virt_machine_device_plug_cb;
    hc->unplug_request = virt_machine_device_unplug_request_cb;
    mc->numa_mem_supported = true;
    mc->auto_enable_numa_with_memhp = true;
}

static void virt_instance_init(Object *obj)
{
    VirtMachineState *vms = VIRT_MACHINE(obj);
    VirtMachineClass *vmc = VIRT_MACHINE_GET_CLASS(vms);

    /* EL3 is disabled by default on virt: this makes us consistent
     * between KVM and TCG for this board, and it also allows us to
     * boot UEFI blobs which assume no TrustZone support.
     */
    vms->secure = false;
    object_property_add_bool(obj, "secure", virt_get_secure,
                             virt_set_secure, NULL);
    object_property_set_description(obj, "secure",
                                    "Set on/off to enable/disable the ARM "
                                    "Security Extensions (TrustZone)",
                                    NULL);

    /* EL2 is also disabled by default, for similar reasons */
    vms->virt = false;
    object_property_add_bool(obj, "virtualization", virt_get_virt,
                             virt_set_virt, NULL);
    object_property_set_description(obj, "virtualization",
                                    "Set on/off to enable/disable emulating a "
                                    "guest CPU which implements the ARM "
                                    "Virtualization Extensions",
                                    NULL);

    /* High memory is enabled by default */
    vms->highmem = true;
    object_property_add_bool(obj, "highmem", virt_get_highmem,
                             virt_set_highmem, NULL);
    object_property_set_description(obj, "highmem",
                                    "Set on/off to enable/disable using "
                                    "physical address space above 32 bits",
                                    NULL);
    /* Default GIC type is v2 */
    vms->gic_version = 2;
    object_property_add_str(obj, "gic-version", virt_get_gic_version,
                        virt_set_gic_version, NULL);
    object_property_set_description(obj, "gic-version",
                                    "Set GIC version. "
                                    "Valid values are 2, 3 and host", NULL);

    vms->highmem_ecam = !vmc->no_highmem_ecam;

    if (vmc->no_its) {
        vms->its = false;
    } else {
        /* Default allows ITS instantiation */
        vms->its = true;
        object_property_add_bool(obj, "its", virt_get_its,
                                 virt_set_its, NULL);
        object_property_set_description(obj, "its",
                                        "Set on/off to enable/disable "
                                        "ITS instantiation",
                                        NULL);
    }

    /* Default disallows iommu instantiation */
    vms->iommu = VIRT_IOMMU_NONE;
    object_property_add_str(obj, "iommu", virt_get_iommu, virt_set_iommu, NULL);
    object_property_set_description(obj, "iommu",
                                    "Set the IOMMU type. "
                                    "Valid values are none and smmuv3",
                                    NULL);

    vms->irqmap = a15irqmap;

    virt_flash_create(vms);
}

static const TypeInfo virt_machine_info = {
    .name          = TYPE_VIRT_MACHINE,
    .parent        = TYPE_MACHINE,
    .abstract      = true,
    .instance_size = sizeof(VirtMachineState),
    .class_size    = sizeof(VirtMachineClass),
    .class_init    = virt_machine_class_init,
    .instance_init = virt_instance_init,
    .interfaces = (InterfaceInfo[]) {
         { TYPE_HOTPLUG_HANDLER },
         { }
    },
};

static void machvirt_machine_init(void)
{
    type_register_static(&virt_machine_info);
}
type_init(machvirt_machine_init);

static void virt_machine_4_2_options(MachineClass *mc)
{
}
DEFINE_VIRT_MACHINE_AS_LATEST(4, 2)

static void virt_machine_4_1_options(MachineClass *mc)
{
    VirtMachineClass *vmc = VIRT_MACHINE_CLASS(OBJECT_CLASS(mc));

    virt_machine_4_2_options(mc);
    compat_props_add(mc->compat_props, hw_compat_4_1, hw_compat_4_1_len);
    vmc->no_ged = true;
    mc->auto_enable_numa_with_memhp = false;
}
DEFINE_VIRT_MACHINE(4, 1)

static void virt_machine_4_0_options(MachineClass *mc)
{
    virt_machine_4_1_options(mc);
    compat_props_add(mc->compat_props, hw_compat_4_0, hw_compat_4_0_len);
}
DEFINE_VIRT_MACHINE(4, 0)

static void virt_machine_3_1_options(MachineClass *mc)
{
    virt_machine_4_0_options(mc);
    compat_props_add(mc->compat_props, hw_compat_3_1, hw_compat_3_1_len);
}
DEFINE_VIRT_MACHINE(3, 1)

static void virt_machine_3_0_options(MachineClass *mc)
{
    virt_machine_3_1_options(mc);
    compat_props_add(mc->compat_props, hw_compat_3_0, hw_compat_3_0_len);
}
DEFINE_VIRT_MACHINE(3, 0)

static void virt_machine_2_12_options(MachineClass *mc)
{
    VirtMachineClass *vmc = VIRT_MACHINE_CLASS(OBJECT_CLASS(mc));

    virt_machine_3_0_options(mc);
    compat_props_add(mc->compat_props, hw_compat_2_12, hw_compat_2_12_len);
    vmc->no_highmem_ecam = true;
    mc->max_cpus = 255;
}
DEFINE_VIRT_MACHINE(2, 12)

static void virt_machine_2_11_options(MachineClass *mc)
{
    VirtMachineClass *vmc = VIRT_MACHINE_CLASS(OBJECT_CLASS(mc));

    virt_machine_2_12_options(mc);
    compat_props_add(mc->compat_props, hw_compat_2_11, hw_compat_2_11_len);
    vmc->smbios_old_sys_ver = true;
}
DEFINE_VIRT_MACHINE(2, 11)

static void virt_machine_2_10_options(MachineClass *mc)
{
    virt_machine_2_11_options(mc);
    compat_props_add(mc->compat_props, hw_compat_2_10, hw_compat_2_10_len);
    /* before 2.11 we never faulted accesses to bad addresses */
    mc->ignore_memory_transaction_failures = true;
}
DEFINE_VIRT_MACHINE(2, 10)

static void virt_machine_2_9_options(MachineClass *mc)
{
    virt_machine_2_10_options(mc);
    compat_props_add(mc->compat_props, hw_compat_2_9, hw_compat_2_9_len);
}
DEFINE_VIRT_MACHINE(2, 9)

static void virt_machine_2_8_options(MachineClass *mc)
{
    VirtMachineClass *vmc = VIRT_MACHINE_CLASS(OBJECT_CLASS(mc));

    virt_machine_2_9_options(mc);
    compat_props_add(mc->compat_props, hw_compat_2_8, hw_compat_2_8_len);
    /* For 2.8 and earlier we falsely claimed in the DT that
     * our timers were edge-triggered, not level-triggered.
     */
    vmc->claim_edge_triggered_timers = true;
}
DEFINE_VIRT_MACHINE(2, 8)

static void virt_machine_2_7_options(MachineClass *mc)
{
    VirtMachineClass *vmc = VIRT_MACHINE_CLASS(OBJECT_CLASS(mc));

    virt_machine_2_8_options(mc);
    compat_props_add(mc->compat_props, hw_compat_2_7, hw_compat_2_7_len);
    /* ITS was introduced with 2.8 */
    vmc->no_its = true;
    /* Stick with 1K pages for migration compatibility */
    mc->minimum_page_bits = 0;
}
DEFINE_VIRT_MACHINE(2, 7)

static void virt_machine_2_6_options(MachineClass *mc)
{
    VirtMachineClass *vmc = VIRT_MACHINE_CLASS(OBJECT_CLASS(mc));

    virt_machine_2_7_options(mc);
    compat_props_add(mc->compat_props, hw_compat_2_6, hw_compat_2_6_len);
    vmc->disallow_affinity_adjustment = true;
    /* Disable PMU for 2.6 as PMU support was first introduced in 2.7 */
    vmc->no_pmu = true;
}
DEFINE_VIRT_MACHINE(2, 6)