hw/cpu/a9mpcore.c

   1 /*
   2  * Cortex-A9MPCore internal peripheral emulation.
   3  *
   4  * Copyright (c) 2009 CodeSourcery.
   5  * Copyright (c) 2011 Linaro Limited.
   6  * Written by Paul Brook, Peter Maydell.
   7  *
   8  * This code is licensed under the GPL.
   9  */
  10
  11 #include "hw/sysbus.h"
  12
  13 typedef struct A9MPPrivState {
  14     SysBusDevice busdev;
  15     uint32_t num_cpu;
  16     MemoryRegion container;
  17     DeviceState *mptimer;
  18     DeviceState *wdt;
  19     DeviceState *gic;
  20     DeviceState *scu;
  21     uint32_t num_irq;
  22 } A9MPPrivState;
  23
  24 static void a9mp_priv_set_irq(void *opaque, int irq, int level)
  25 {
  26     A9MPPrivState *s = (A9MPPrivState *)opaque;
  27     qemu_set_irq(qdev_get_gpio_in(s->gic, irq), level);
  28 }
  29
  30 static int a9mp_priv_init(SysBusDevice *dev)
  31 {
  32     A9MPPrivState *s = FROM_SYSBUS(A9MPPrivState, dev);
  33     SysBusDevice *timerbusdev, *wdtbusdev, *gicbusdev, *scubusdev;
  34     int i;
  35
  36     s->gic = qdev_create(NULL, "arm_gic");
  37     qdev_prop_set_uint32(s->gic, "num-cpu", s->num_cpu);
  38     qdev_prop_set_uint32(s->gic, "num-irq", s->num_irq);
  39     qdev_init_nofail(s->gic);
  40     gicbusdev = SYS_BUS_DEVICE(s->gic);
  41
  42     /* Pass through outbound IRQ lines from the GIC */
  43     sysbus_pass_irq(dev, gicbusdev);
  44
  45     /* Pass through inbound GPIO lines to the GIC */
  46     qdev_init_gpio_in(&s->busdev.qdev, a9mp_priv_set_irq, s->num_irq - 32);
  47
  48     s->scu = qdev_create(NULL, "a9-scu");
  49     qdev_prop_set_uint32(s->scu, "num-cpu", s->num_cpu);
  50     qdev_init_nofail(s->scu);
  51     scubusdev = SYS_BUS_DEVICE(s->scu);
  52
  53     s->mptimer = qdev_create(NULL, "arm_mptimer");
  54     qdev_prop_set_uint32(s->mptimer, "num-cpu", s->num_cpu);
  55     qdev_init_nofail(s->mptimer);
  56     timerbusdev = SYS_BUS_DEVICE(s->mptimer);
  57
  58     s->wdt = qdev_create(NULL, "arm_mptimer");
  59     qdev_prop_set_uint32(s->wdt, "num-cpu", s->num_cpu);
  60     qdev_init_nofail(s->wdt);
  61     wdtbusdev = SYS_BUS_DEVICE(s->wdt);
  62
  63     /* Memory map (addresses are offsets from PERIPHBASE):
  64      *  0x0000-0x00ff -- Snoop Control Unit
  65      *  0x0100-0x01ff -- GIC CPU interface
  66      *  0x0200-0x02ff -- Global Timer
  67      *  0x0300-0x05ff -- nothing
  68      *  0x0600-0x06ff -- private timers and watchdogs
  69      *  0x0700-0x0fff -- nothing
  70      *  0x1000-0x1fff -- GIC Distributor
  71      *
  72      * We should implement the global timer but don't currently do so.
  73      */
  74     memory_region_init(&s->container, OBJECT(s), "a9mp-priv-container", 0x2000);
  75     memory_region_add_subregion(&s->container, 0,
  76                                 sysbus_mmio_get_region(scubusdev, 0));
  77     /* GIC CPU interface */
  78     memory_region_add_subregion(&s->container, 0x100,
  79                                 sysbus_mmio_get_region(gicbusdev, 1));
  80     /* Note that the A9 exposes only the "timer/watchdog for this core"
  81      * memory region, not the "timer/watchdog for core X" ones 11MPcore has.
  82      */
  83     memory_region_add_subregion(&s->container, 0x600,
  84                                 sysbus_mmio_get_region(timerbusdev, 0));
  85     memory_region_add_subregion(&s->container, 0x620,
  86                                 sysbus_mmio_get_region(wdtbusdev, 0));
  87     memory_region_add_subregion(&s->container, 0x1000,
  88                                 sysbus_mmio_get_region(gicbusdev, 0));
  89
  90     sysbus_init_mmio(dev, &s->container);
  91
  92     /* Wire up the interrupt from each watchdog and timer.
  93      * For each core the timer is PPI 29 and the watchdog PPI 30.
  94      */
  95     for (i = 0; i < s->num_cpu; i++) {
  96         int ppibase = (s->num_irq - 32) + i * 32;
  97         sysbus_connect_irq(timerbusdev, i,
  98                            qdev_get_gpio_in(s->gic, ppibase + 29));
  99         sysbus_connect_irq(wdtbusdev, i,
 100                            qdev_get_gpio_in(s->gic, ppibase + 30));
 101     }
 102     return 0;
 103 }
 104
 105 static Property a9mp_priv_properties[] = {
 106     DEFINE_PROP_UINT32("num-cpu", A9MPPrivState, num_cpu, 1),
 107     /* The Cortex-A9MP may have anything from 0 to 224 external interrupt
 108      * IRQ lines (with another 32 internal). We default to 64+32, which
 109      * is the number provided by the Cortex-A9MP test chip in the
 110      * Realview PBX-A9 and Versatile Express A9 development boards.
 111      * Other boards may differ and should set this property appropriately.
 112      */
 113     DEFINE_PROP_UINT32("num-irq", A9MPPrivState, num_irq, 96),
 114     DEFINE_PROP_END_OF_LIST(),
 115 };
 116
 117 static void a9mp_priv_class_init(ObjectClass *klass, void *data)
 118 {
 119     DeviceClass *dc = DEVICE_CLASS(klass);
 120     SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
 121
 122     k->init = a9mp_priv_init;
 123     dc->props = a9mp_priv_properties;
 124 }
 125
 126 static const TypeInfo a9mp_priv_info = {
 127     .name          = "a9mpcore_priv",
 128     .parent        = TYPE_SYS_BUS_DEVICE,
 129     .instance_size = sizeof(A9MPPrivState),
 130     .class_init    = a9mp_priv_class_init,
 131 };
 132
 133 static void a9mp_register_types(void)
 134 {
 135     type_register_static(&a9mp_priv_info);
 136 }
 137
 138 type_init(a9mp_register_types)