hw/gpio/omap_gpio.c

   1 /*
   2  * TI OMAP processors GPIO emulation.
   3  *
   4  * Copyright (C) 2006-2008 Andrzej Zaborowski  <balrog@zabor.org>
   5  * Copyright (C) 2007-2009 Nokia Corporation
   6  *
   7  * This program is free software; you can redistribute it and/or
   8  * modify it under the terms of the GNU General Public License as
   9  * published by the Free Software Foundation; either version 2 or
  10  * (at your option) version 3 of the License.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License along
  18  * with this program; if not, see <http://www.gnu.org/licenses/>.
  19  */
  20
  21 #include "hw/hw.h"
  22 #include "hw/arm/omap.h"
  23 #include "hw/sysbus.h"
  24
  25 struct omap_gpio_s {
  26     qemu_irq irq;
  27     qemu_irq handler[16];
  28
  29     uint16_t inputs;
  30     uint16_t outputs;
  31     uint16_t dir;
  32     uint16_t edge;
  33     uint16_t mask;
  34     uint16_t ints;
  35     uint16_t pins;
  36 };
  37
  38 #define TYPE_OMAP1_GPIO "omap-gpio"
  39 #define OMAP1_GPIO(obj) \
  40     OBJECT_CHECK(struct omap_gpif_s, (obj), TYPE_OMAP1_GPIO)
  41
  42 struct omap_gpif_s {
  43     SysBusDevice parent_obj;
  44
  45     MemoryRegion iomem;
  46     int mpu_model;
  47     void *clk;
  48     struct omap_gpio_s omap1;
  49 };
  50
  51 /* General-Purpose I/O of OMAP1 */
  52 static void omap_gpio_set(void *opaque, int line, int level)
  53 {
  54     struct omap_gpio_s *s = &((struct omap_gpif_s *) opaque)->omap1;
  55     uint16_t prev = s->inputs;
  56
  57     if (level)
  58         s->inputs |= 1 << line;
  59     else
  60         s->inputs &= ~(1 << line);
  61
  62     if (((s->edge & s->inputs & ~prev) | (~s->edge & ~s->inputs & prev)) &
  63                     (1 << line) & s->dir & ~s->mask) {
  64         s->ints |= 1 << line;
  65         qemu_irq_raise(s->irq);
  66     }
  67 }
  68
  69 static uint64_t omap_gpio_read(void *opaque, hwaddr addr,
  70                                unsigned size)
  71 {
  72     struct omap_gpio_s *s = (struct omap_gpio_s *) opaque;
  73     int offset = addr & OMAP_MPUI_REG_MASK;
  74
  75     if (size != 2) {
  76         return omap_badwidth_read16(opaque, addr);
  77     }
  78
  79     switch (offset) {
  80     case 0x00:  /* DATA_INPUT */
  81         return s->inputs & s->pins;
  82
  83     case 0x04:  /* DATA_OUTPUT */
  84         return s->outputs;
  85
  86     case 0x08:  /* DIRECTION_CONTROL */
  87         return s->dir;
  88
  89     case 0x0c:  /* INTERRUPT_CONTROL */
  90         return s->edge;
  91
  92     case 0x10:  /* INTERRUPT_MASK */
  93         return s->mask;
  94
  95     case 0x14:  /* INTERRUPT_STATUS */
  96         return s->ints;
  97
  98     case 0x18:  /* PIN_CONTROL (not in OMAP310) */
  99         OMAP_BAD_REG(addr);
 100         return s->pins;
 101     }
 102
 103     OMAP_BAD_REG(addr);
 104     return 0;
 105 }
 106
 107 static void omap_gpio_write(void *opaque, hwaddr addr,
 108                             uint64_t value, unsigned size)
 109 {
 110     struct omap_gpio_s *s = (struct omap_gpio_s *) opaque;
 111     int offset = addr & OMAP_MPUI_REG_MASK;
 112     uint16_t diff;
 113     int ln;
 114
 115     if (size != 2) {
 116         return omap_badwidth_write16(opaque, addr, value);
 117     }
 118
 119     switch (offset) {
 120     case 0x00:  /* DATA_INPUT */
 121         OMAP_RO_REG(addr);
 122         return;
 123
 124     case 0x04:  /* DATA_OUTPUT */
 125         diff = (s->outputs ^ value) & ~s->dir;
 126         s->outputs = value;
 127         while ((ln = ffs(diff))) {
 128             ln --;
 129             if (s->handler[ln])
 130                 qemu_set_irq(s->handler[ln], (value >> ln) & 1);
 131             diff &= ~(1 << ln);
 132         }
 133         break;
 134
 135     case 0x08:  /* DIRECTION_CONTROL */
 136         diff = s->outputs & (s->dir ^ value);
 137         s->dir = value;
 138
 139         value = s->outputs & ~s->dir;
 140         while ((ln = ffs(diff))) {
 141             ln --;
 142             if (s->handler[ln])
 143                 qemu_set_irq(s->handler[ln], (value >> ln) & 1);
 144             diff &= ~(1 << ln);
 145         }
 146         break;
 147
 148     case 0x0c:  /* INTERRUPT_CONTROL */
 149         s->edge = value;
 150         break;
 151
 152     case 0x10:  /* INTERRUPT_MASK */
 153         s->mask = value;
 154         break;
 155
 156     case 0x14:  /* INTERRUPT_STATUS */
 157         s->ints &= ~value;
 158         if (!s->ints)
 159             qemu_irq_lower(s->irq);
 160         break;
 161
 162     case 0x18:  /* PIN_CONTROL (not in OMAP310 TRM) */
 163         OMAP_BAD_REG(addr);
 164         s->pins = value;
 165         break;
 166
 167     default:
 168         OMAP_BAD_REG(addr);
 169         return;
 170     }
 171 }
 172
 173 /* *Some* sources say the memory region is 32-bit.  */
 174 static const MemoryRegionOps omap_gpio_ops = {
 175     .read = omap_gpio_read,
 176     .write = omap_gpio_write,
 177     .endianness = DEVICE_NATIVE_ENDIAN,
 178 };
 179
 180 static void omap_gpio_reset(struct omap_gpio_s *s)
 181 {
 182     s->inputs = 0;
 183     s->outputs = ~0;
 184     s->dir = ~0;
 185     s->edge = ~0;
 186     s->mask = ~0;
 187     s->ints = 0;
 188     s->pins = ~0;
 189 }
 190
 191 struct omap2_gpio_s {
 192     qemu_irq irq[2];
 193     qemu_irq wkup;
 194     qemu_irq *handler;
 195     MemoryRegion iomem;
 196
 197     uint8_t revision;
 198     uint8_t config[2];
 199     uint32_t inputs;
 200     uint32_t outputs;
 201     uint32_t dir;
 202     uint32_t level[2];
 203     uint32_t edge[2];
 204     uint32_t mask[2];
 205     uint32_t wumask;
 206     uint32_t ints[2];
 207     uint32_t debounce;
 208     uint8_t delay;
 209 };
 210
 211 #define TYPE_OMAP2_GPIO "omap2-gpio"
 212 #define OMAP2_GPIO(obj) \
 213     OBJECT_CHECK(struct omap2_gpif_s, (obj), TYPE_OMAP2_GPIO)
 214
 215 struct omap2_gpif_s {
 216     SysBusDevice parent_obj;
 217
 218     MemoryRegion iomem;
 219     int mpu_model;
 220     void *iclk;
 221     void *fclk[6];
 222     int modulecount;
 223     struct omap2_gpio_s *modules;
 224     qemu_irq *handler;
 225     int autoidle;
 226     int gpo;
 227 };
 228
 229 /* General-Purpose Interface of OMAP2/3 */
 230 static inline void omap2_gpio_module_int_update(struct omap2_gpio_s *s,
 231                                                 int line)
 232 {
 233     qemu_set_irq(s->irq[line], s->ints[line] & s->mask[line]);
 234 }
 235
 236 static void omap2_gpio_module_wake(struct omap2_gpio_s *s, int line)
 237 {
 238     if (!(s->config[0] & (1 << 2)))                     /* ENAWAKEUP */
 239         return;
 240     if (!(s->config[0] & (3 << 3)))                     /* Force Idle */
 241         return;
 242     if (!(s->wumask & (1 << line)))
 243         return;
 244
 245     qemu_irq_raise(s->wkup);
 246 }
 247
 248 static inline void omap2_gpio_module_out_update(struct omap2_gpio_s *s,
 249                 uint32_t diff)
 250 {
 251     int ln;
 252
 253     s->outputs ^= diff;
 254     diff &= ~s->dir;
 255     while ((ln = ffs(diff))) {
 256         ln --;
 257         qemu_set_irq(s->handler[ln], (s->outputs >> ln) & 1);
 258         diff &= ~(1 << ln);
 259     }
 260 }
 261
 262 static void omap2_gpio_module_level_update(struct omap2_gpio_s *s, int line)
 263 {
 264     s->ints[line] |= s->dir &
 265             ((s->inputs & s->level[1]) | (~s->inputs & s->level[0]));
 266     omap2_gpio_module_int_update(s, line);
 267 }
 268
 269 static inline void omap2_gpio_module_int(struct omap2_gpio_s *s, int line)
 270 {
 271     s->ints[0] |= 1 << line;
 272     omap2_gpio_module_int_update(s, 0);
 273     s->ints[1] |= 1 << line;
 274     omap2_gpio_module_int_update(s, 1);
 275     omap2_gpio_module_wake(s, line);
 276 }
 277
 278 static void omap2_gpio_set(void *opaque, int line, int level)
 279 {
 280     struct omap2_gpif_s *p = opaque;
 281     struct omap2_gpio_s *s = &p->modules[line >> 5];
 282
 283     line &= 31;
 284     if (level) {
 285         if (s->dir & (1 << line) & ((~s->inputs & s->edge[0]) | s->level[1]))
 286             omap2_gpio_module_int(s, line);
 287         s->inputs |= 1 << line;
 288     } else {
 289         if (s->dir & (1 << line) & ((s->inputs & s->edge[1]) | s->level[0]))
 290             omap2_gpio_module_int(s, line);
 291         s->inputs &= ~(1 << line);
 292     }
 293 }
 294
 295 static void omap2_gpio_module_reset(struct omap2_gpio_s *s)
 296 {
 297     s->config[0] = 0;
 298     s->config[1] = 2;
 299     s->ints[0] = 0;
 300     s->ints[1] = 0;
 301     s->mask[0] = 0;
 302     s->mask[1] = 0;
 303     s->wumask = 0;
 304     s->dir = ~0;
 305     s->level[0] = 0;
 306     s->level[1] = 0;
 307     s->edge[0] = 0;
 308     s->edge[1] = 0;
 309     s->debounce = 0;
 310     s->delay = 0;
 311 }
 312
 313 static uint32_t omap2_gpio_module_read(void *opaque, hwaddr addr)
 314 {
 315     struct omap2_gpio_s *s = (struct omap2_gpio_s *) opaque;
 316
 317     switch (addr) {
 318     case 0x00:  /* GPIO_REVISION */
 319         return s->revision;
 320
 321     case 0x10:  /* GPIO_SYSCONFIG */
 322         return s->config[0];
 323
 324     case 0x14:  /* GPIO_SYSSTATUS */
 325         return 0x01;
 326
 327     case 0x18:  /* GPIO_IRQSTATUS1 */
 328         return s->ints[0];
 329
 330     case 0x1c:  /* GPIO_IRQENABLE1 */
 331     case 0x60:  /* GPIO_CLEARIRQENABLE1 */
 332     case 0x64:  /* GPIO_SETIRQENABLE1 */
 333         return s->mask[0];
 334
 335     case 0x20:  /* GPIO_WAKEUPENABLE */
 336     case 0x80:  /* GPIO_CLEARWKUENA */
 337     case 0x84:  /* GPIO_SETWKUENA */
 338         return s->wumask;
 339
 340     case 0x28:  /* GPIO_IRQSTATUS2 */
 341         return s->ints[1];
 342
 343     case 0x2c:  /* GPIO_IRQENABLE2 */
 344     case 0x70:  /* GPIO_CLEARIRQENABLE2 */
 345     case 0x74:  /* GPIO_SETIREQNEABLE2 */
 346         return s->mask[1];
 347
 348     case 0x30:  /* GPIO_CTRL */
 349         return s->config[1];
 350
 351     case 0x34:  /* GPIO_OE */
 352         return s->dir;
 353
 354     case 0x38:  /* GPIO_DATAIN */
 355         return s->inputs;
 356
 357     case 0x3c:  /* GPIO_DATAOUT */
 358     case 0x90:  /* GPIO_CLEARDATAOUT */
 359     case 0x94:  /* GPIO_SETDATAOUT */
 360         return s->outputs;
 361
 362     case 0x40:  /* GPIO_LEVELDETECT0 */
 363         return s->level[0];
 364
 365     case 0x44:  /* GPIO_LEVELDETECT1 */
 366         return s->level[1];
 367
 368     case 0x48:  /* GPIO_RISINGDETECT */
 369         return s->edge[0];
 370
 371     case 0x4c:  /* GPIO_FALLINGDETECT */
 372         return s->edge[1];
 373
 374     case 0x50:  /* GPIO_DEBOUNCENABLE */
 375         return s->debounce;
 376
 377     case 0x54:  /* GPIO_DEBOUNCINGTIME */
 378         return s->delay;
 379     }
 380
 381     OMAP_BAD_REG(addr);
 382     return 0;
 383 }
 384
 385 static void omap2_gpio_module_write(void *opaque, hwaddr addr,
 386                 uint32_t value)
 387 {
 388     struct omap2_gpio_s *s = (struct omap2_gpio_s *) opaque;
 389     uint32_t diff;
 390     int ln;
 391
 392     switch (addr) {
 393     case 0x00:  /* GPIO_REVISION */
 394     case 0x14:  /* GPIO_SYSSTATUS */
 395     case 0x38:  /* GPIO_DATAIN */
 396         OMAP_RO_REG(addr);
 397         break;
 398
 399     case 0x10:  /* GPIO_SYSCONFIG */
 400         if (((value >> 3) & 3) == 3)
 401             fprintf(stderr, "%s: bad IDLEMODE value\n", __FUNCTION__);
 402         if (value & 2)
 403             omap2_gpio_module_reset(s);
 404         s->config[0] = value & 0x1d;
 405         break;
 406
 407     case 0x18:  /* GPIO_IRQSTATUS1 */
 408         if (s->ints[0] & value) {
 409             s->ints[0] &= ~value;
 410             omap2_gpio_module_level_update(s, 0);
 411         }
 412         break;
 413
 414     case 0x1c:  /* GPIO_IRQENABLE1 */
 415         s->mask[0] = value;
 416         omap2_gpio_module_int_update(s, 0);
 417         break;
 418
 419     case 0x20:  /* GPIO_WAKEUPENABLE */
 420         s->wumask = value;
 421         break;
 422
 423     case 0x28:  /* GPIO_IRQSTATUS2 */
 424         if (s->ints[1] & value) {
 425             s->ints[1] &= ~value;
 426             omap2_gpio_module_level_update(s, 1);
 427         }
 428         break;
 429
 430     case 0x2c:  /* GPIO_IRQENABLE2 */
 431         s->mask[1] = value;
 432         omap2_gpio_module_int_update(s, 1);
 433         break;
 434
 435     case 0x30:  /* GPIO_CTRL */
 436         s->config[1] = value & 7;
 437         break;
 438
 439     case 0x34:  /* GPIO_OE */
 440         diff = s->outputs & (s->dir ^ value);
 441         s->dir = value;
 442
 443         value = s->outputs & ~s->dir;
 444         while ((ln = ffs(diff))) {
 445             diff &= ~(1 <<-- ln);
 446             qemu_set_irq(s->handler[ln], (value >> ln) & 1);
 447         }
 448
 449         omap2_gpio_module_level_update(s, 0);
 450         omap2_gpio_module_level_update(s, 1);
 451         break;
 452
 453     case 0x3c:  /* GPIO_DATAOUT */
 454         omap2_gpio_module_out_update(s, s->outputs ^ value);
 455         break;
 456
 457     case 0x40:  /* GPIO_LEVELDETECT0 */
 458         s->level[0] = value;
 459         omap2_gpio_module_level_update(s, 0);
 460         omap2_gpio_module_level_update(s, 1);
 461         break;
 462
 463     case 0x44:  /* GPIO_LEVELDETECT1 */
 464         s->level[1] = value;
 465         omap2_gpio_module_level_update(s, 0);
 466         omap2_gpio_module_level_update(s, 1);
 467         break;
 468
 469     case 0x48:  /* GPIO_RISINGDETECT */
 470         s->edge[0] = value;
 471         break;
 472
 473     case 0x4c:  /* GPIO_FALLINGDETECT */
 474         s->edge[1] = value;
 475         break;
 476
 477     case 0x50:  /* GPIO_DEBOUNCENABLE */
 478         s->debounce = value;
 479         break;
 480
 481     case 0x54:  /* GPIO_DEBOUNCINGTIME */
 482         s->delay = value;
 483         break;
 484
 485     case 0x60:  /* GPIO_CLEARIRQENABLE1 */
 486         s->mask[0] &= ~value;
 487         omap2_gpio_module_int_update(s, 0);
 488         break;
 489
 490     case 0x64:  /* GPIO_SETIRQENABLE1 */
 491         s->mask[0] |= value;
 492         omap2_gpio_module_int_update(s, 0);
 493         break;
 494
 495     case 0x70:  /* GPIO_CLEARIRQENABLE2 */
 496         s->mask[1] &= ~value;
 497         omap2_gpio_module_int_update(s, 1);
 498         break;
 499
 500     case 0x74:  /* GPIO_SETIREQNEABLE2 */
 501         s->mask[1] |= value;
 502         omap2_gpio_module_int_update(s, 1);
 503         break;
 504
 505     case 0x80:  /* GPIO_CLEARWKUENA */
 506         s->wumask &= ~value;
 507         break;
 508
 509     case 0x84:  /* GPIO_SETWKUENA */
 510         s->wumask |= value;
 511         break;
 512
 513     case 0x90:  /* GPIO_CLEARDATAOUT */
 514         omap2_gpio_module_out_update(s, s->outputs & value);
 515         break;
 516
 517     case 0x94:  /* GPIO_SETDATAOUT */
 518         omap2_gpio_module_out_update(s, ~s->outputs & value);
 519         break;
 520
 521     default:
 522         OMAP_BAD_REG(addr);
 523         return;
 524     }
 525 }
 526
 527 static uint32_t omap2_gpio_module_readp(void *opaque, hwaddr addr)
 528 {
 529     return omap2_gpio_module_read(opaque, addr & ~3) >> ((addr & 3) << 3);
 530 }
 531
 532 static void omap2_gpio_module_writep(void *opaque, hwaddr addr,
 533                 uint32_t value)
 534 {
 535     uint32_t cur = 0;
 536     uint32_t mask = 0xffff;
 537
 538     switch (addr & ~3) {
 539     case 0x00:  /* GPIO_REVISION */
 540     case 0x14:  /* GPIO_SYSSTATUS */
 541     case 0x38:  /* GPIO_DATAIN */
 542         OMAP_RO_REG(addr);
 543         break;
 544
 545     case 0x10:  /* GPIO_SYSCONFIG */
 546     case 0x1c:  /* GPIO_IRQENABLE1 */
 547     case 0x20:  /* GPIO_WAKEUPENABLE */
 548     case 0x2c:  /* GPIO_IRQENABLE2 */
 549     case 0x30:  /* GPIO_CTRL */
 550     case 0x34:  /* GPIO_OE */
 551     case 0x3c:  /* GPIO_DATAOUT */
 552     case 0x40:  /* GPIO_LEVELDETECT0 */
 553     case 0x44:  /* GPIO_LEVELDETECT1 */
 554     case 0x48:  /* GPIO_RISINGDETECT */
 555     case 0x4c:  /* GPIO_FALLINGDETECT */
 556     case 0x50:  /* GPIO_DEBOUNCENABLE */
 557     case 0x54:  /* GPIO_DEBOUNCINGTIME */
 558         cur = omap2_gpio_module_read(opaque, addr & ~3) &
 559                 ~(mask << ((addr & 3) << 3));
 560
 561         /* Fall through.  */
 562     case 0x18:  /* GPIO_IRQSTATUS1 */
 563     case 0x28:  /* GPIO_IRQSTATUS2 */
 564     case 0x60:  /* GPIO_CLEARIRQENABLE1 */
 565     case 0x64:  /* GPIO_SETIRQENABLE1 */
 566     case 0x70:  /* GPIO_CLEARIRQENABLE2 */
 567     case 0x74:  /* GPIO_SETIREQNEABLE2 */
 568     case 0x80:  /* GPIO_CLEARWKUENA */
 569     case 0x84:  /* GPIO_SETWKUENA */
 570     case 0x90:  /* GPIO_CLEARDATAOUT */
 571     case 0x94:  /* GPIO_SETDATAOUT */
 572         value <<= (addr & 3) << 3;
 573         omap2_gpio_module_write(opaque, addr, cur | value);
 574         break;
 575
 576     default:
 577         OMAP_BAD_REG(addr);
 578         return;
 579     }
 580 }
 581
 582 static const MemoryRegionOps omap2_gpio_module_ops = {
 583     .old_mmio = {
 584         .read = {
 585             omap2_gpio_module_readp,
 586             omap2_gpio_module_readp,
 587             omap2_gpio_module_read,
 588         },
 589         .write = {
 590             omap2_gpio_module_writep,
 591             omap2_gpio_module_writep,
 592             omap2_gpio_module_write,
 593         },
 594     },
 595     .endianness = DEVICE_NATIVE_ENDIAN,
 596 };
 597
 598 static void omap_gpif_reset(DeviceState *dev)
 599 {
 600     struct omap_gpif_s *s = OMAP1_GPIO(dev);
 601
 602     omap_gpio_reset(&s->omap1);
 603 }
 604
 605 static void omap2_gpif_reset(DeviceState *dev)
 606 {
 607     struct omap2_gpif_s *s = OMAP2_GPIO(dev);
 608     int i;
 609
 610     for (i = 0; i < s->modulecount; i++) {
 611         omap2_gpio_module_reset(&s->modules[i]);
 612     }
 613     s->autoidle = 0;
 614     s->gpo = 0;
 615 }
 616
 617 static uint64_t omap2_gpif_top_read(void *opaque, hwaddr addr,
 618                                     unsigned size)
 619 {
 620     struct omap2_gpif_s *s = (struct omap2_gpif_s *) opaque;
 621
 622     switch (addr) {
 623     case 0x00:  /* IPGENERICOCPSPL_REVISION */
 624         return 0x18;
 625
 626     case 0x10:  /* IPGENERICOCPSPL_SYSCONFIG */
 627         return s->autoidle;
 628
 629     case 0x14:  /* IPGENERICOCPSPL_SYSSTATUS */
 630         return 0x01;
 631
 632     case 0x18:  /* IPGENERICOCPSPL_IRQSTATUS */
 633         return 0x00;
 634
 635     case 0x40:  /* IPGENERICOCPSPL_GPO */
 636         return s->gpo;
 637
 638     case 0x50:  /* IPGENERICOCPSPL_GPI */
 639         return 0x00;
 640     }
 641
 642     OMAP_BAD_REG(addr);
 643     return 0;
 644 }
 645
 646 static void omap2_gpif_top_write(void *opaque, hwaddr addr,
 647                                  uint64_t value, unsigned size)
 648 {
 649     struct omap2_gpif_s *s = (struct omap2_gpif_s *) opaque;
 650
 651     switch (addr) {
 652     case 0x00:  /* IPGENERICOCPSPL_REVISION */
 653     case 0x14:  /* IPGENERICOCPSPL_SYSSTATUS */
 654     case 0x18:  /* IPGENERICOCPSPL_IRQSTATUS */
 655     case 0x50:  /* IPGENERICOCPSPL_GPI */
 656         OMAP_RO_REG(addr);
 657         break;
 658
 659     case 0x10:  /* IPGENERICOCPSPL_SYSCONFIG */
 660         if (value & (1 << 1))                                   /* SOFTRESET */
 661             omap2_gpif_reset(DEVICE(s));
 662         s->autoidle = value & 1;
 663         break;
 664
 665     case 0x40:  /* IPGENERICOCPSPL_GPO */
 666         s->gpo = value & 1;
 667         break;
 668
 669     default:
 670         OMAP_BAD_REG(addr);
 671         return;
 672     }
 673 }
 674
 675 static const MemoryRegionOps omap2_gpif_top_ops = {
 676     .read = omap2_gpif_top_read,
 677     .write = omap2_gpif_top_write,
 678     .endianness = DEVICE_NATIVE_ENDIAN,
 679 };
 680
 681 static int omap_gpio_init(SysBusDevice *sbd)
 682 {
 683     DeviceState *dev = DEVICE(sbd);
 684     struct omap_gpif_s *s = OMAP1_GPIO(dev);
 685
 686     if (!s->clk) {
 687         hw_error("omap-gpio: clk not connected\n");
 688     }
 689     qdev_init_gpio_in(dev, omap_gpio_set, 16);
 690     qdev_init_gpio_out(dev, s->omap1.handler, 16);
 691     sysbus_init_irq(sbd, &s->omap1.irq);
 692     memory_region_init_io(&s->iomem, OBJECT(s), &omap_gpio_ops, &s->omap1,
 693                           "omap.gpio", 0x1000);
 694     sysbus_init_mmio(sbd, &s->iomem);
 695     return 0;
 696 }
 697
 698 static int omap2_gpio_init(SysBusDevice *sbd)
 699 {
 700     DeviceState *dev = DEVICE(sbd);
 701     struct omap2_gpif_s *s = OMAP2_GPIO(dev);
 702     int i;
 703
 704     if (!s->iclk) {
 705         hw_error("omap2-gpio: iclk not connected\n");
 706     }
 707     if (s->mpu_model < omap3430) {
 708         s->modulecount = (s->mpu_model < omap2430) ? 4 : 5;
 709         memory_region_init_io(&s->iomem, OBJECT(s), &omap2_gpif_top_ops, s,
 710                               "omap2.gpio", 0x1000);
 711         sysbus_init_mmio(sbd, &s->iomem);
 712     } else {
 713         s->modulecount = 6;
 714     }
 715     s->modules = g_malloc0(s->modulecount * sizeof(struct omap2_gpio_s));
 716     s->handler = g_malloc0(s->modulecount * 32 * sizeof(qemu_irq));
 717     qdev_init_gpio_in(dev, omap2_gpio_set, s->modulecount * 32);
 718     qdev_init_gpio_out(dev, s->handler, s->modulecount * 32);
 719     for (i = 0; i < s->modulecount; i++) {
 720         struct omap2_gpio_s *m = &s->modules[i];
 721         if (!s->fclk[i]) {
 722             hw_error("omap2-gpio: fclk%d not connected\n", i);
 723         }
 724         m->revision = (s->mpu_model < omap3430) ? 0x18 : 0x25;
 725         m->handler = &s->handler[i * 32];
 726         sysbus_init_irq(sbd, &m->irq[0]); /* mpu irq */
 727         sysbus_init_irq(sbd, &m->irq[1]); /* dsp irq */
 728         sysbus_init_irq(sbd, &m->wkup);
 729         memory_region_init_io(&m->iomem, OBJECT(s), &omap2_gpio_module_ops, m,
 730                               "omap.gpio-module", 0x1000);
 731         sysbus_init_mmio(sbd, &m->iomem);
 732     }
 733     return 0;
 734 }
 735
 736 /* Using qdev pointer properties for the clocks is not ideal.
 737  * qdev should support a generic means of defining a 'port' with
 738  * an arbitrary interface for connecting two devices. Then we
 739  * could reframe the omap clock API in terms of clock ports,
 740  * and get some type safety. For now the best qdev provides is
 741  * passing an arbitrary pointer.
 742  * (It's not possible to pass in the string which is the clock
 743  * name, because this device does not have the necessary information
 744  * (ie the struct omap_mpu_state_s*) to do the clockname to pointer
 745  * translation.)
 746  */
 747
 748 static Property omap_gpio_properties[] = {
 749     DEFINE_PROP_INT32("mpu_model", struct omap_gpif_s, mpu_model, 0),
 750     DEFINE_PROP_PTR("clk", struct omap_gpif_s, clk),
 751     DEFINE_PROP_END_OF_LIST(),
 752 };
 753
 754 static void omap_gpio_class_init(ObjectClass *klass, void *data)
 755 {
 756     DeviceClass *dc = DEVICE_CLASS(klass);
 757     SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
 758
 759     k->init = omap_gpio_init;
 760     dc->reset = omap_gpif_reset;
 761     dc->props = omap_gpio_properties;
 762 }
 763
 764 static const TypeInfo omap_gpio_info = {
 765     .name          = TYPE_OMAP1_GPIO,
 766     .parent        = TYPE_SYS_BUS_DEVICE,
 767     .instance_size = sizeof(struct omap_gpif_s),
 768     .class_init    = omap_gpio_class_init,
 769 };
 770
 771 static Property omap2_gpio_properties[] = {
 772     DEFINE_PROP_INT32("mpu_model", struct omap2_gpif_s, mpu_model, 0),
 773     DEFINE_PROP_PTR("iclk", struct omap2_gpif_s, iclk),
 774     DEFINE_PROP_PTR("fclk0", struct omap2_gpif_s, fclk[0]),
 775     DEFINE_PROP_PTR("fclk1", struct omap2_gpif_s, fclk[1]),
 776     DEFINE_PROP_PTR("fclk2", struct omap2_gpif_s, fclk[2]),
 777     DEFINE_PROP_PTR("fclk3", struct omap2_gpif_s, fclk[3]),
 778     DEFINE_PROP_PTR("fclk4", struct omap2_gpif_s, fclk[4]),
 779     DEFINE_PROP_PTR("fclk5", struct omap2_gpif_s, fclk[5]),
 780     DEFINE_PROP_END_OF_LIST(),
 781 };
 782
 783 static void omap2_gpio_class_init(ObjectClass *klass, void *data)
 784 {
 785     DeviceClass *dc = DEVICE_CLASS(klass);
 786     SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
 787
 788     k->init = omap2_gpio_init;
 789     dc->reset = omap2_gpif_reset;
 790     dc->props = omap2_gpio_properties;
 791 }
 792
 793 static const TypeInfo omap2_gpio_info = {
 794     .name          = TYPE_OMAP2_GPIO,
 795     .parent        = TYPE_SYS_BUS_DEVICE,
 796     .instance_size = sizeof(struct omap2_gpif_s),
 797     .class_init    = omap2_gpio_class_init,
 798 };
 799
 800 static void omap_gpio_register_types(void)
 801 {
 802     type_register_static(&omap_gpio_info);
 803     type_register_static(&omap2_gpio_info);
 804 }
 805
 806 type_init(omap_gpio_register_types)