hw/intc/arm_gic.c

   1 /*
   2  * ARM Generic/Distributed Interrupt Controller
   3  *
   4  * Copyright (c) 2006-2007 CodeSourcery.
   5  * Written by Paul Brook
   6  *
   7  * This code is licensed under the GPL.
   8  */
   9
  10 /* This file contains implementation code for the RealView EB interrupt
  11  * controller, MPCore distributed interrupt controller and ARMv7-M
  12  * Nested Vectored Interrupt Controller.
  13  * It is compiled in two ways:
  14  *  (1) as a standalone file to produce a sysbus device which is a GIC
  15  *  that can be used on the realview board and as one of the builtin
  16  *  private peripherals for the ARM MP CPUs (11MPCore, A9, etc)
  17  *  (2) by being directly #included into armv7m_nvic.c to produce the
  18  *  armv7m_nvic device.
  19  */
  20
  21 #include "hw/sysbus.h"
  22 #include "gic_internal.h"
  23 #include "qom/cpu.h"
  24
  25 //#define DEBUG_GIC
  26
  27 #ifdef DEBUG_GIC
  28 #define DPRINTF(fmt, ...) \
  29 do { fprintf(stderr, "arm_gic: " fmt , ## __VA_ARGS__); } while (0)
  30 #else
  31 #define DPRINTF(fmt, ...) do {} while(0)
  32 #endif
  33
  34 static const uint8_t gic_id[] = {
  35     0x90, 0x13, 0x04, 0x00, 0x0d, 0xf0, 0x05, 0xb1
  36 };
  37
  38 #define NUM_CPU(s) ((s)->num_cpu)
  39
  40 static inline int gic_get_current_cpu(GICState *s)
  41 {
  42     if (s->num_cpu > 1) {
  43         return current_cpu->cpu_index;
  44     }
  45     return 0;
  46 }
  47
  48 /* TODO: Many places that call this routine could be optimized.  */
  49 /* Update interrupt status after enabled or pending bits have been changed.  */
  50 void gic_update(GICState *s)
  51 {
  52     int best_irq;
  53     int best_prio;
  54     int irq;
  55     int level;
  56     int cpu;
  57     int cm;
  58
  59     for (cpu = 0; cpu < NUM_CPU(s); cpu++) {
  60         cm = 1 << cpu;
  61         s->current_pending[cpu] = 1023;
  62         if (!s->enabled || !s->cpu_enabled[cpu]) {
  63             qemu_irq_lower(s->parent_irq[cpu]);
  64             return;
  65         }
  66         best_prio = 0x100;
  67         best_irq = 1023;
  68         for (irq = 0; irq < s->num_irq; irq++) {
  69             if (GIC_TEST_ENABLED(irq, cm) && GIC_TEST_PENDING(irq, cm)) {
  70                 if (GIC_GET_PRIORITY(irq, cpu) < best_prio) {
  71                     best_prio = GIC_GET_PRIORITY(irq, cpu);
  72                     best_irq = irq;
  73                 }
  74             }
  75         }
  76         level = 0;
  77         if (best_prio < s->priority_mask[cpu]) {
  78             s->current_pending[cpu] = best_irq;
  79             if (best_prio < s->running_priority[cpu]) {
  80                 DPRINTF("Raised pending IRQ %d (cpu %d)\n", best_irq, cpu);
  81                 level = 1;
  82             }
  83         }
  84         qemu_set_irq(s->parent_irq[cpu], level);
  85     }
  86 }
  87
  88 void gic_set_pending_private(GICState *s, int cpu, int irq)
  89 {
  90     int cm = 1 << cpu;
  91
  92     if (GIC_TEST_PENDING(irq, cm))
  93         return;
  94
  95     DPRINTF("Set %d pending cpu %d\n", irq, cpu);
  96     GIC_SET_PENDING(irq, cm);
  97     gic_update(s);
  98 }
  99
 100 /* Process a change in an external IRQ input.  */
 101 static void gic_set_irq(void *opaque, int irq, int level)
 102 {
 103     /* Meaning of the 'irq' parameter:
 104      *  [0..N-1] : external interrupts
 105      *  [N..N+31] : PPI (internal) interrupts for CPU 0
 106      *  [N+32..N+63] : PPI (internal interrupts for CPU 1
 107      *  ...
 108      */
 109     GICState *s = (GICState *)opaque;
 110     int cm, target;
 111     if (irq < (s->num_irq - GIC_INTERNAL)) {
 112         /* The first external input line is internal interrupt 32.  */
 113         cm = ALL_CPU_MASK;
 114         irq += GIC_INTERNAL;
 115         target = GIC_TARGET(irq);
 116     } else {
 117         int cpu;
 118         irq -= (s->num_irq - GIC_INTERNAL);
 119         cpu = irq / GIC_INTERNAL;
 120         irq %= GIC_INTERNAL;
 121         cm = 1 << cpu;
 122         target = cm;
 123     }
 124
 125     if (level == GIC_TEST_LEVEL(irq, cm)) {
 126         return;
 127     }
 128
 129     if (level) {
 130         GIC_SET_LEVEL(irq, cm);
 131         if (GIC_TEST_TRIGGER(irq) || GIC_TEST_ENABLED(irq, cm)) {
 132             DPRINTF("Set %d pending mask %x\n", irq, target);
 133             GIC_SET_PENDING(irq, target);
 134         }
 135     } else {
 136         GIC_CLEAR_LEVEL(irq, cm);
 137     }
 138     gic_update(s);
 139 }
 140
 141 static void gic_set_running_irq(GICState *s, int cpu, int irq)
 142 {
 143     s->running_irq[cpu] = irq;
 144     if (irq == 1023) {
 145         s->running_priority[cpu] = 0x100;
 146     } else {
 147         s->running_priority[cpu] = GIC_GET_PRIORITY(irq, cpu);
 148     }
 149     gic_update(s);
 150 }
 151
 152 uint32_t gic_acknowledge_irq(GICState *s, int cpu)
 153 {
 154     int new_irq;
 155     int cm = 1 << cpu;
 156     new_irq = s->current_pending[cpu];
 157     if (new_irq == 1023
 158             || GIC_GET_PRIORITY(new_irq, cpu) >= s->running_priority[cpu]) {
 159         DPRINTF("ACK no pending IRQ\n");
 160         return 1023;
 161     }
 162     s->last_active[new_irq][cpu] = s->running_irq[cpu];
 163     /* Clear pending flags for both level and edge triggered interrupts.
 164        Level triggered IRQs will be reasserted once they become inactive.  */
 165     GIC_CLEAR_PENDING(new_irq, GIC_TEST_MODEL(new_irq) ? ALL_CPU_MASK : cm);
 166     gic_set_running_irq(s, cpu, new_irq);
 167     DPRINTF("ACK %d\n", new_irq);
 168     return new_irq;
 169 }
 170
 171 void gic_complete_irq(GICState *s, int cpu, int irq)
 172 {
 173     int update = 0;
 174     int cm = 1 << cpu;
 175     DPRINTF("EOI %d\n", irq);
 176     if (irq >= s->num_irq) {
 177         /* This handles two cases:
 178          * 1. If software writes the ID of a spurious interrupt [ie 1023]
 179          * to the GICC_EOIR, the GIC ignores that write.
 180          * 2. If software writes the number of a non-existent interrupt
 181          * this must be a subcase of "value written does not match the last
 182          * valid interrupt value read from the Interrupt Acknowledge
 183          * register" and so this is UNPREDICTABLE. We choose to ignore it.
 184          */
 185         return;
 186     }
 187     if (s->running_irq[cpu] == 1023)
 188         return; /* No active IRQ.  */
 189     /* Mark level triggered interrupts as pending if they are still
 190        raised.  */
 191     if (!GIC_TEST_TRIGGER(irq) && GIC_TEST_ENABLED(irq, cm)
 192         && GIC_TEST_LEVEL(irq, cm) && (GIC_TARGET(irq) & cm) != 0) {
 193         DPRINTF("Set %d pending mask %x\n", irq, cm);
 194         GIC_SET_PENDING(irq, cm);
 195         update = 1;
 196     }
 197     if (irq != s->running_irq[cpu]) {
 198         /* Complete an IRQ that is not currently running.  */
 199         int tmp = s->running_irq[cpu];
 200         while (s->last_active[tmp][cpu] != 1023) {
 201             if (s->last_active[tmp][cpu] == irq) {
 202                 s->last_active[tmp][cpu] = s->last_active[irq][cpu];
 203                 break;
 204             }
 205             tmp = s->last_active[tmp][cpu];
 206         }
 207         if (update) {
 208             gic_update(s);
 209         }
 210     } else {
 211         /* Complete the current running IRQ.  */
 212         gic_set_running_irq(s, cpu, s->last_active[s->running_irq[cpu]][cpu]);
 213     }
 214 }
 215
 216 static uint32_t gic_dist_readb(void *opaque, hwaddr offset)
 217 {
 218     GICState *s = (GICState *)opaque;
 219     uint32_t res;
 220     int irq;
 221     int i;
 222     int cpu;
 223     int cm;
 224     int mask;
 225
 226     cpu = gic_get_current_cpu(s);
 227     cm = 1 << cpu;
 228     if (offset < 0x100) {
 229         if (offset == 0)
 230             return s->enabled;
 231         if (offset == 4)
 232             return ((s->num_irq / 32) - 1) | ((NUM_CPU(s) - 1) << 5);
 233         if (offset < 0x08)
 234             return 0;
 235         if (offset >= 0x80) {
 236             /* Interrupt Security , RAZ/WI */
 237             return 0;
 238         }
 239         goto bad_reg;
 240     } else if (offset < 0x200) {
 241         /* Interrupt Set/Clear Enable.  */
 242         if (offset < 0x180)
 243             irq = (offset - 0x100) * 8;
 244         else
 245             irq = (offset - 0x180) * 8;
 246         irq += GIC_BASE_IRQ;
 247         if (irq >= s->num_irq)
 248             goto bad_reg;
 249         res = 0;
 250         for (i = 0; i < 8; i++) {
 251             if (GIC_TEST_ENABLED(irq + i, cm)) {
 252                 res |= (1 << i);
 253             }
 254         }
 255     } else if (offset < 0x300) {
 256         /* Interrupt Set/Clear Pending.  */
 257         if (offset < 0x280)
 258             irq = (offset - 0x200) * 8;
 259         else
 260             irq = (offset - 0x280) * 8;
 261         irq += GIC_BASE_IRQ;
 262         if (irq >= s->num_irq)
 263             goto bad_reg;
 264         res = 0;
 265         mask = (irq < GIC_INTERNAL) ?  cm : ALL_CPU_MASK;
 266         for (i = 0; i < 8; i++) {
 267             if (GIC_TEST_PENDING(irq + i, mask)) {
 268                 res |= (1 << i);
 269             }
 270         }
 271     } else if (offset < 0x400) {
 272         /* Interrupt Active.  */
 273         irq = (offset - 0x300) * 8 + GIC_BASE_IRQ;
 274         if (irq >= s->num_irq)
 275             goto bad_reg;
 276         res = 0;
 277         mask = (irq < GIC_INTERNAL) ?  cm : ALL_CPU_MASK;
 278         for (i = 0; i < 8; i++) {
 279             if (GIC_TEST_ACTIVE(irq + i, mask)) {
 280                 res |= (1 << i);
 281             }
 282         }
 283     } else if (offset < 0x800) {
 284         /* Interrupt Priority.  */
 285         irq = (offset - 0x400) + GIC_BASE_IRQ;
 286         if (irq >= s->num_irq)
 287             goto bad_reg;
 288         res = GIC_GET_PRIORITY(irq, cpu);
 289     } else if (offset < 0xc00) {
 290         /* Interrupt CPU Target.  */
 291         if (s->num_cpu == 1 && s->revision != REV_11MPCORE) {
 292             /* For uniprocessor GICs these RAZ/WI */
 293             res = 0;
 294         } else {
 295             irq = (offset - 0x800) + GIC_BASE_IRQ;
 296             if (irq >= s->num_irq) {
 297                 goto bad_reg;
 298             }
 299             if (irq >= 29 && irq <= 31) {
 300                 res = cm;
 301             } else {
 302                 res = GIC_TARGET(irq);
 303             }
 304         }
 305     } else if (offset < 0xf00) {
 306         /* Interrupt Configuration.  */
 307         irq = (offset - 0xc00) * 2 + GIC_BASE_IRQ;
 308         if (irq >= s->num_irq)
 309             goto bad_reg;
 310         res = 0;
 311         for (i = 0; i < 4; i++) {
 312             if (GIC_TEST_MODEL(irq + i))
 313                 res |= (1 << (i * 2));
 314             if (GIC_TEST_TRIGGER(irq + i))
 315                 res |= (2 << (i * 2));
 316         }
 317     } else if (offset < 0xfe0) {
 318         goto bad_reg;
 319     } else /* offset >= 0xfe0 */ {
 320         if (offset & 3) {
 321             res = 0;
 322         } else {
 323             res = gic_id[(offset - 0xfe0) >> 2];
 324         }
 325     }
 326     return res;
 327 bad_reg:
 328     qemu_log_mask(LOG_GUEST_ERROR,
 329                   "gic_dist_readb: Bad offset %x\n", (int)offset);
 330     return 0;
 331 }
 332
 333 static uint32_t gic_dist_readw(void *opaque, hwaddr offset)
 334 {
 335     uint32_t val;
 336     val = gic_dist_readb(opaque, offset);
 337     val |= gic_dist_readb(opaque, offset + 1) << 8;
 338     return val;
 339 }
 340
 341 static uint32_t gic_dist_readl(void *opaque, hwaddr offset)
 342 {
 343     uint32_t val;
 344     val = gic_dist_readw(opaque, offset);
 345     val |= gic_dist_readw(opaque, offset + 2) << 16;
 346     return val;
 347 }
 348
 349 static void gic_dist_writeb(void *opaque, hwaddr offset,
 350                             uint32_t value)
 351 {
 352     GICState *s = (GICState *)opaque;
 353     int irq;
 354     int i;
 355     int cpu;
 356
 357     cpu = gic_get_current_cpu(s);
 358     if (offset < 0x100) {
 359         if (offset == 0) {
 360             s->enabled = (value & 1);
 361             DPRINTF("Distribution %sabled\n", s->enabled ? "En" : "Dis");
 362         } else if (offset < 4) {
 363             /* ignored.  */
 364         } else if (offset >= 0x80) {
 365             /* Interrupt Security Registers, RAZ/WI */
 366         } else {
 367             goto bad_reg;
 368         }
 369     } else if (offset < 0x180) {
 370         /* Interrupt Set Enable.  */
 371         irq = (offset - 0x100) * 8 + GIC_BASE_IRQ;
 372         if (irq >= s->num_irq)
 373             goto bad_reg;
 374         if (irq < 16)
 375           value = 0xff;
 376         for (i = 0; i < 8; i++) {
 377             if (value & (1 << i)) {
 378                 int mask =
 379                     (irq < GIC_INTERNAL) ? (1 << cpu) : GIC_TARGET(irq + i);
 380                 int cm = (irq < GIC_INTERNAL) ? (1 << cpu) : ALL_CPU_MASK;
 381
 382                 if (!GIC_TEST_ENABLED(irq + i, cm)) {
 383                     DPRINTF("Enabled IRQ %d\n", irq + i);
 384                 }
 385                 GIC_SET_ENABLED(irq + i, cm);
 386                 /* If a raised level triggered IRQ enabled then mark
 387                    is as pending.  */
 388                 if (GIC_TEST_LEVEL(irq + i, mask)
 389                         && !GIC_TEST_TRIGGER(irq + i)) {
 390                     DPRINTF("Set %d pending mask %x\n", irq + i, mask);
 391                     GIC_SET_PENDING(irq + i, mask);
 392                 }
 393             }
 394         }
 395     } else if (offset < 0x200) {
 396         /* Interrupt Clear Enable.  */
 397         irq = (offset - 0x180) * 8 + GIC_BASE_IRQ;
 398         if (irq >= s->num_irq)
 399             goto bad_reg;
 400         if (irq < 16)
 401           value = 0;
 402         for (i = 0; i < 8; i++) {
 403             if (value & (1 << i)) {
 404                 int cm = (irq < GIC_INTERNAL) ? (1 << cpu) : ALL_CPU_MASK;
 405
 406                 if (GIC_TEST_ENABLED(irq + i, cm)) {
 407                     DPRINTF("Disabled IRQ %d\n", irq + i);
 408                 }
 409                 GIC_CLEAR_ENABLED(irq + i, cm);
 410             }
 411         }
 412     } else if (offset < 0x280) {
 413         /* Interrupt Set Pending.  */
 414         irq = (offset - 0x200) * 8 + GIC_BASE_IRQ;
 415         if (irq >= s->num_irq)
 416             goto bad_reg;
 417         if (irq < 16)
 418           irq = 0;
 419
 420         for (i = 0; i < 8; i++) {
 421             if (value & (1 << i)) {
 422                 GIC_SET_PENDING(irq + i, GIC_TARGET(irq + i));
 423             }
 424         }
 425     } else if (offset < 0x300) {
 426         /* Interrupt Clear Pending.  */
 427         irq = (offset - 0x280) * 8 + GIC_BASE_IRQ;
 428         if (irq >= s->num_irq)
 429             goto bad_reg;
 430         for (i = 0; i < 8; i++) {
 431             /* ??? This currently clears the pending bit for all CPUs, even
 432                for per-CPU interrupts.  It's unclear whether this is the
 433                corect behavior.  */
 434             if (value & (1 << i)) {
 435                 GIC_CLEAR_PENDING(irq + i, ALL_CPU_MASK);
 436             }
 437         }
 438     } else if (offset < 0x400) {
 439         /* Interrupt Active.  */
 440         goto bad_reg;
 441     } else if (offset < 0x800) {
 442         /* Interrupt Priority.  */
 443         irq = (offset - 0x400) + GIC_BASE_IRQ;
 444         if (irq >= s->num_irq)
 445             goto bad_reg;
 446         if (irq < GIC_INTERNAL) {
 447             s->priority1[irq][cpu] = value;
 448         } else {
 449             s->priority2[irq - GIC_INTERNAL] = value;
 450         }
 451     } else if (offset < 0xc00) {
 452         /* Interrupt CPU Target. RAZ/WI on uniprocessor GICs, with the
 453          * annoying exception of the 11MPCore's GIC.
 454          */
 455         if (s->num_cpu != 1 || s->revision == REV_11MPCORE) {
 456             irq = (offset - 0x800) + GIC_BASE_IRQ;
 457             if (irq >= s->num_irq) {
 458                 goto bad_reg;
 459             }
 460             if (irq < 29) {
 461                 value = 0;
 462             } else if (irq < GIC_INTERNAL) {
 463                 value = ALL_CPU_MASK;
 464             }
 465             s->irq_target[irq] = value & ALL_CPU_MASK;
 466         }
 467     } else if (offset < 0xf00) {
 468         /* Interrupt Configuration.  */
 469         irq = (offset - 0xc00) * 4 + GIC_BASE_IRQ;
 470         if (irq >= s->num_irq)
 471             goto bad_reg;
 472         if (irq < GIC_INTERNAL)
 473             value |= 0xaa;
 474         for (i = 0; i < 4; i++) {
 475             if (value & (1 << (i * 2))) {
 476                 GIC_SET_MODEL(irq + i);
 477             } else {
 478                 GIC_CLEAR_MODEL(irq + i);
 479             }
 480             if (value & (2 << (i * 2))) {
 481                 GIC_SET_TRIGGER(irq + i);
 482             } else {
 483                 GIC_CLEAR_TRIGGER(irq + i);
 484             }
 485         }
 486     } else {
 487         /* 0xf00 is only handled for 32-bit writes.  */
 488         goto bad_reg;
 489     }
 490     gic_update(s);
 491     return;
 492 bad_reg:
 493     qemu_log_mask(LOG_GUEST_ERROR,
 494                   "gic_dist_writeb: Bad offset %x\n", (int)offset);
 495 }
 496
 497 static void gic_dist_writew(void *opaque, hwaddr offset,
 498                             uint32_t value)
 499 {
 500     gic_dist_writeb(opaque, offset, value & 0xff);
 501     gic_dist_writeb(opaque, offset + 1, value >> 8);
 502 }
 503
 504 static void gic_dist_writel(void *opaque, hwaddr offset,
 505                             uint32_t value)
 506 {
 507     GICState *s = (GICState *)opaque;
 508     if (offset == 0xf00) {
 509         int cpu;
 510         int irq;
 511         int mask;
 512
 513         cpu = gic_get_current_cpu(s);
 514         irq = value & 0x3ff;
 515         switch ((value >> 24) & 3) {
 516         case 0:
 517             mask = (value >> 16) & ALL_CPU_MASK;
 518             break;
 519         case 1:
 520             mask = ALL_CPU_MASK ^ (1 << cpu);
 521             break;
 522         case 2:
 523             mask = 1 << cpu;
 524             break;
 525         default:
 526             DPRINTF("Bad Soft Int target filter\n");
 527             mask = ALL_CPU_MASK;
 528             break;
 529         }
 530         GIC_SET_PENDING(irq, mask);
 531         gic_update(s);
 532         return;
 533     }
 534     gic_dist_writew(opaque, offset, value & 0xffff);
 535     gic_dist_writew(opaque, offset + 2, value >> 16);
 536 }
 537
 538 static const MemoryRegionOps gic_dist_ops = {
 539     .old_mmio = {
 540         .read = { gic_dist_readb, gic_dist_readw, gic_dist_readl, },
 541         .write = { gic_dist_writeb, gic_dist_writew, gic_dist_writel, },
 542     },
 543     .endianness = DEVICE_NATIVE_ENDIAN,
 544 };
 545
 546 static uint32_t gic_cpu_read(GICState *s, int cpu, int offset)
 547 {
 548     switch (offset) {
 549     case 0x00: /* Control */
 550         return s->cpu_enabled[cpu];
 551     case 0x04: /* Priority mask */
 552         return s->priority_mask[cpu];
 553     case 0x08: /* Binary Point */
 554         /* ??? Not implemented.  */
 555         return 0;
 556     case 0x0c: /* Acknowledge */
 557         return gic_acknowledge_irq(s, cpu);
 558     case 0x14: /* Running Priority */
 559         return s->running_priority[cpu];
 560     case 0x18: /* Highest Pending Interrupt */
 561         return s->current_pending[cpu];
 562     default:
 563         qemu_log_mask(LOG_GUEST_ERROR,
 564                       "gic_cpu_read: Bad offset %x\n", (int)offset);
 565         return 0;
 566     }
 567 }
 568
 569 static void gic_cpu_write(GICState *s, int cpu, int offset, uint32_t value)
 570 {
 571     switch (offset) {
 572     case 0x00: /* Control */
 573         s->cpu_enabled[cpu] = (value & 1);
 574         DPRINTF("CPU %d %sabled\n", cpu, s->cpu_enabled[cpu] ? "En" : "Dis");
 575         break;
 576     case 0x04: /* Priority mask */
 577         s->priority_mask[cpu] = (value & 0xff);
 578         break;
 579     case 0x08: /* Binary Point */
 580         /* ??? Not implemented.  */
 581         break;
 582     case 0x10: /* End Of Interrupt */
 583         return gic_complete_irq(s, cpu, value & 0x3ff);
 584     default:
 585         qemu_log_mask(LOG_GUEST_ERROR,
 586                       "gic_cpu_write: Bad offset %x\n", (int)offset);
 587         return;
 588     }
 589     gic_update(s);
 590 }
 591
 592 /* Wrappers to read/write the GIC CPU interface for the current CPU */
 593 static uint64_t gic_thiscpu_read(void *opaque, hwaddr addr,
 594                                  unsigned size)
 595 {
 596     GICState *s = (GICState *)opaque;
 597     return gic_cpu_read(s, gic_get_current_cpu(s), addr);
 598 }
 599
 600 static void gic_thiscpu_write(void *opaque, hwaddr addr,
 601                               uint64_t value, unsigned size)
 602 {
 603     GICState *s = (GICState *)opaque;
 604     gic_cpu_write(s, gic_get_current_cpu(s), addr, value);
 605 }
 606
 607 /* Wrappers to read/write the GIC CPU interface for a specific CPU.
 608  * These just decode the opaque pointer into GICState* + cpu id.
 609  */
 610 static uint64_t gic_do_cpu_read(void *opaque, hwaddr addr,
 611                                 unsigned size)
 612 {
 613     GICState **backref = (GICState **)opaque;
 614     GICState *s = *backref;
 615     int id = (backref - s->backref);
 616     return gic_cpu_read(s, id, addr);
 617 }
 618
 619 static void gic_do_cpu_write(void *opaque, hwaddr addr,
 620                              uint64_t value, unsigned size)
 621 {
 622     GICState **backref = (GICState **)opaque;
 623     GICState *s = *backref;
 624     int id = (backref - s->backref);
 625     gic_cpu_write(s, id, addr, value);
 626 }
 627
 628 static const MemoryRegionOps gic_thiscpu_ops = {
 629     .read = gic_thiscpu_read,
 630     .write = gic_thiscpu_write,
 631     .endianness = DEVICE_NATIVE_ENDIAN,
 632 };
 633
 634 static const MemoryRegionOps gic_cpu_ops = {
 635     .read = gic_do_cpu_read,
 636     .write = gic_do_cpu_write,
 637     .endianness = DEVICE_NATIVE_ENDIAN,
 638 };
 639
 640 void gic_init_irqs_and_distributor(GICState *s, int num_irq)
 641 {
 642     int i;
 643
 644     i = s->num_irq - GIC_INTERNAL;
 645     /* For the GIC, also expose incoming GPIO lines for PPIs for each CPU.
 646      * GPIO array layout is thus:
 647      *  [0..N-1] SPIs
 648      *  [N..N+31] PPIs for CPU 0
 649      *  [N+32..N+63] PPIs for CPU 1
 650      *   ...
 651      */
 652     if (s->revision != REV_NVIC) {
 653         i += (GIC_INTERNAL * s->num_cpu);
 654     }
 655     qdev_init_gpio_in(&s->busdev.qdev, gic_set_irq, i);
 656     for (i = 0; i < NUM_CPU(s); i++) {
 657         sysbus_init_irq(&s->busdev, &s->parent_irq[i]);
 658     }
 659     memory_region_init_io(&s->iomem, OBJECT(s), &gic_dist_ops, s,
 660                           "gic_dist", 0x1000);
 661 }
 662
 663 static void arm_gic_realize(DeviceState *dev, Error **errp)
 664 {
 665     /* Device instance realize function for the GIC sysbus device */
 666     int i;
 667     GICState *s = ARM_GIC(dev);
 668     SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
 669     ARMGICClass *agc = ARM_GIC_GET_CLASS(s);
 670
 671     agc->parent_realize(dev, errp);
 672     if (error_is_set(errp)) {
 673         return;
 674     }
 675
 676     gic_init_irqs_and_distributor(s, s->num_irq);
 677
 678     /* Memory regions for the CPU interfaces (NVIC doesn't have these):
 679      * a region for "CPU interface for this core", then a region for
 680      * "CPU interface for core 0", "for core 1", ...
 681      * NB that the memory region size of 0x100 applies for the 11MPCore
 682      * and also cores following the GIC v1 spec (ie A9).
 683      * GIC v2 defines a larger memory region (0x1000) so this will need
 684      * to be extended when we implement A15.
 685      */
 686     memory_region_init_io(&s->cpuiomem[0], OBJECT(s), &gic_thiscpu_ops, s,
 687                           "gic_cpu", 0x100);
 688     for (i = 0; i < NUM_CPU(s); i++) {
 689         s->backref[i] = s;
 690         memory_region_init_io(&s->cpuiomem[i+1], OBJECT(s), &gic_cpu_ops,
 691                               &s->backref[i], "gic_cpu", 0x100);
 692     }
 693     /* Distributor */
 694     sysbus_init_mmio(sbd, &s->iomem);
 695     /* cpu interfaces (one for "current cpu" plus one per cpu) */
 696     for (i = 0; i <= NUM_CPU(s); i++) {
 697         sysbus_init_mmio(sbd, &s->cpuiomem[i]);
 698     }
 699 }
 700
 701 static void arm_gic_class_init(ObjectClass *klass, void *data)
 702 {
 703     DeviceClass *dc = DEVICE_CLASS(klass);
 704     ARMGICClass *agc = ARM_GIC_CLASS(klass);
 705
 706     dc->no_user = 1;
 707     agc->parent_realize = dc->realize;
 708     dc->realize = arm_gic_realize;
 709 }
 710
 711 static const TypeInfo arm_gic_info = {
 712     .name = TYPE_ARM_GIC,
 713     .parent = TYPE_ARM_GIC_COMMON,
 714     .instance_size = sizeof(GICState),
 715     .class_init = arm_gic_class_init,
 716     .class_size = sizeof(ARMGICClass),
 717 };
 718
 719 static void arm_gic_register_types(void)
 720 {
 721     type_register_static(&arm_gic_info);
 722 }
 723
 724 type_init(arm_gic_register_types)