hw/mips_malta.c

   1 /*
   2  * QEMU Malta board support
   3  *
   4  * Copyright (c) 2006 Aurelien Jarno
   5  *
   6  * Permission is hereby granted, free of charge, to any person obtaining a copy
   7  * of this software and associated documentation files (the "Software"), to deal
   8  * in the Software without restriction, including without limitation the rights
   9  * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
  10  * copies of the Software, and to permit persons to whom the Software is
  11  * furnished to do so, subject to the following conditions:
  12  *
  13  * The above copyright notice and this permission notice shall be included in
  14  * all copies or substantial portions of the Software.
  15  *
  16  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  17  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  18  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
  19  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  20  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
  21  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
  22  * THE SOFTWARE.
  23  */
  24
  25 #include "hw.h"
  26 #include "pc.h"
  27 #include "fdc.h"
  28 #include "net.h"
  29 #include "boards.h"
  30 #include "smbus.h"
  31 #include "block.h"
  32 #include "flash.h"
  33 #include "mips.h"
  34 #include "pci.h"
  35 #include "qemu-char.h"
  36 #include "sysemu.h"
  37 #include "audio/audio.h"
  38 #include "boards.h"
  39 #include "qemu-log.h"
  40 #include "mips-bios.h"
  41 #include "ide.h"
  42 #include "loader.h"
  43 #include "elf.h"
  44
  45 //#define DEBUG_BOARD_INIT
  46
  47 #ifdef TARGET_MIPS64
  48 #define PHYS_TO_VIRT(x) ((x) | ~0x7fffffffULL)
  49 #else
  50 #define PHYS_TO_VIRT(x) ((x) | ~0x7fffffffU)
  51 #endif
  52
  53 #define ENVP_ADDR (int32_t)0x80002000
  54 #define VIRT_TO_PHYS_ADDEND (-((int64_t)(int32_t)0x80000000))
  55
  56 #define ENVP_NB_ENTRIES         16
  57 #define ENVP_ENTRY_SIZE         256
  58
  59 #define MAX_IDE_BUS 2
  60
  61 typedef struct {
  62     uint32_t leds;
  63     uint32_t brk;
  64     uint32_t gpout;
  65     uint32_t i2cin;
  66     uint32_t i2coe;
  67     uint32_t i2cout;
  68     uint32_t i2csel;
  69     CharDriverState *display;
  70     char display_text[9];
  71     SerialState *uart;
  72 } MaltaFPGAState;
  73
  74 static PITState *pit;
  75
  76 static struct _loaderparams {
  77     int ram_size;
  78     const char *kernel_filename;
  79     const char *kernel_cmdline;
  80     const char *initrd_filename;
  81 } loaderparams;
  82
  83 /* Malta FPGA */
  84 static void malta_fpga_update_display(void *opaque)
  85 {
  86     char leds_text[9];
  87     int i;
  88     MaltaFPGAState *s = opaque;
  89
  90     for (i = 7 ; i >= 0 ; i--) {
  91         if (s->leds & (1 << i))
  92             leds_text[i] = '#';
  93         else
  94             leds_text[i] = ' ';
  95     }
  96     leds_text[8] = '\0';
  97
  98     qemu_chr_printf(s->display, "\e[H\n\n|\e[32m%-8.8s\e[00m|\r\n", leds_text);
  99     qemu_chr_printf(s->display, "\n\n\n\n|\e[31m%-8.8s\e[00m|", s->display_text);
 100 }
 101
 102 /*
 103  * EEPROM 24C01 / 24C02 emulation.
 104  *
 105  * Emulation for serial EEPROMs:
 106  * 24C01 - 1024 bit (128 x 8)
 107  * 24C02 - 2048 bit (256 x 8)
 108  *
 109  * Typical device names include Microchip 24C02SC or SGS Thomson ST24C02.
 110  */
 111
 112 //~ #define DEBUG
 113
 114 #if defined(DEBUG)
 115 #  define logout(fmt, ...) fprintf(stderr, "MALTA\t%-24s" fmt, __func__, ## __VA_ARGS__)
 116 #else
 117 #  define logout(fmt, ...) ((void)0)
 118 #endif
 119
 120 struct _eeprom24c0x_t {
 121   uint8_t tick;
 122   uint8_t address;
 123   uint8_t command;
 124   uint8_t ack;
 125   uint8_t scl;
 126   uint8_t sda;
 127   uint8_t data;
 128   //~ uint16_t size;
 129   uint8_t contents[256];
 130 };
 131
 132 typedef struct _eeprom24c0x_t eeprom24c0x_t;
 133
 134 static eeprom24c0x_t eeprom = {
 135     .contents = {
 136         /* 00000000: */ 0x80,0x08,0x04,0x0D,0x0A,0x01,0x40,0x00,
 137         /* 00000008: */ 0x01,0x75,0x54,0x00,0x82,0x08,0x00,0x01,
 138         /* 00000010: */ 0x8F,0x04,0x02,0x01,0x01,0x00,0x0E,0x00,
 139         /* 00000018: */ 0x00,0x00,0x00,0x14,0x0F,0x14,0x2D,0x40,
 140         /* 00000020: */ 0x15,0x08,0x15,0x08,0x00,0x00,0x00,0x00,
 141         /* 00000028: */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
 142         /* 00000030: */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
 143         /* 00000038: */ 0x00,0x00,0x00,0x00,0x00,0x00,0x12,0xD0,
 144         /* 00000040: */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
 145         /* 00000048: */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
 146         /* 00000050: */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
 147         /* 00000058: */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
 148         /* 00000060: */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
 149         /* 00000068: */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
 150         /* 00000070: */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
 151         /* 00000078: */ 0x00,0x00,0x00,0x00,0x00,0x00,0x64,0xF4,
 152     },
 153 };
 154
 155 static uint8_t eeprom24c0x_read(void)
 156 {
 157     logout("%u: scl = %u, sda = %u, data = 0x%02x\n",
 158         eeprom.tick, eeprom.scl, eeprom.sda, eeprom.data);
 159     return eeprom.sda;
 160 }
 161
 162 static void eeprom24c0x_write(int scl, int sda)
 163 {
 164     if (eeprom.scl && scl && (eeprom.sda != sda)) {
 165         logout("%u: scl = %u->%u, sda = %u->%u i2c %s\n",
 166                 eeprom.tick, eeprom.scl, scl, eeprom.sda, sda, sda ? "stop" : "start");
 167         if (!sda) {
 168             eeprom.tick = 1;
 169             eeprom.command = 0;
 170         }
 171     } else if (eeprom.tick == 0 && !eeprom.ack) {
 172         /* Waiting for start. */
 173         logout("%u: scl = %u->%u, sda = %u->%u wait for i2c start\n",
 174                 eeprom.tick, eeprom.scl, scl, eeprom.sda, sda);
 175     } else if (!eeprom.scl && scl) {
 176         logout("%u: scl = %u->%u, sda = %u->%u trigger bit\n",
 177                 eeprom.tick, eeprom.scl, scl, eeprom.sda, sda);
 178         if (eeprom.ack) {
 179             logout("\ti2c ack bit = 0\n");
 180             sda = 0;
 181             eeprom.ack = 0;
 182         } else if (eeprom.sda == sda) {
 183             uint8_t bit = (sda != 0);
 184             logout("\ti2c bit = %d\n", bit);
 185             if (eeprom.tick < 9) {
 186                 eeprom.command <<= 1;
 187                 eeprom.command += bit;
 188                 eeprom.tick++;
 189                 if (eeprom.tick == 9) {
 190                     logout("\tcommand 0x%04x, %s\n", eeprom.command, bit ? "read" : "write");
 191                     eeprom.ack = 1;
 192                 }
 193             } else if (eeprom.tick < 17) {
 194                 if (eeprom.command & 1) {
 195                     sda = ((eeprom.data & 0x80) != 0);
 196                 }
 197                 eeprom.address <<= 1;
 198                 eeprom.address += bit;
 199                 eeprom.tick++;
 200                 eeprom.data <<= 1;
 201                 if (eeprom.tick == 17) {
 202                     eeprom.data = eeprom.contents[eeprom.address];
 203                     logout("\taddress 0x%04x, data 0x%02x\n", eeprom.address, eeprom.data);
 204                     eeprom.ack = 1;
 205                     eeprom.tick = 0;
 206                 }
 207             } else if (eeprom.tick >= 17) {
 208                 sda = 0;
 209             }
 210         } else {
 211             logout("\tsda changed with raising scl\n");
 212         }
 213     } else {
 214         logout("%u: scl = %u->%u, sda = %u->%u\n", eeprom.tick, eeprom.scl, scl, eeprom.sda, sda);
 215     }
 216     eeprom.scl = scl;
 217     eeprom.sda = sda;
 218 }
 219
 220 static uint32_t malta_fpga_readl(void *opaque, target_phys_addr_t addr)
 221 {
 222     MaltaFPGAState *s = opaque;
 223     uint32_t val = 0;
 224     uint32_t saddr;
 225
 226     saddr = (addr & 0xfffff);
 227
 228     switch (saddr) {
 229
 230     /* SWITCH Register */
 231     case 0x00200:
 232         val = 0x00000000;               /* All switches closed */
 233         break;
 234
 235     /* STATUS Register */
 236     case 0x00208:
 237 #ifdef TARGET_WORDS_BIGENDIAN
 238         val = 0x00000012;
 239 #else
 240         val = 0x00000010;
 241 #endif
 242         break;
 243
 244     /* JMPRS Register */
 245     case 0x00210:
 246         val = 0x00;
 247         break;
 248
 249     /* LEDBAR Register */
 250     case 0x00408:
 251         val = s->leds;
 252         break;
 253
 254     /* BRKRES Register */
 255     case 0x00508:
 256         val = s->brk;
 257         break;
 258
 259     /* UART Registers are handled directly by the serial device */
 260
 261     /* GPOUT Register */
 262     case 0x00a00:
 263         val = s->gpout;
 264         break;
 265
 266     /* XXX: implement a real I2C controller */
 267
 268     /* GPINP Register */
 269     case 0x00a08:
 270         /* IN = OUT until a real I2C control is implemented */
 271         if (s->i2csel)
 272             val = s->i2cout;
 273         else
 274             val = 0x00;
 275         break;
 276
 277     /* I2CINP Register */
 278     case 0x00b00:
 279         val = ((s->i2cin & ~1) | eeprom24c0x_read());
 280         break;
 281
 282     /* I2COE Register */
 283     case 0x00b08:
 284         val = s->i2coe;
 285         break;
 286
 287     /* I2COUT Register */
 288     case 0x00b10:
 289         val = s->i2cout;
 290         break;
 291
 292     /* I2CSEL Register */
 293     case 0x00b18:
 294         val = s->i2csel;
 295         break;
 296
 297     default:
 298 #if 0
 299         printf ("malta_fpga_read: Bad register offset 0x" TARGET_FMT_lx "\n",
 300                 addr);
 301 #endif
 302         break;
 303     }
 304     return val;
 305 }
 306
 307 static void malta_fpga_writel(void *opaque, target_phys_addr_t addr,
 308                               uint32_t val)
 309 {
 310     MaltaFPGAState *s = opaque;
 311     uint32_t saddr;
 312
 313     saddr = (addr & 0xfffff);
 314
 315     switch (saddr) {
 316
 317     /* SWITCH Register */
 318     case 0x00200:
 319         break;
 320
 321     /* JMPRS Register */
 322     case 0x00210:
 323         break;
 324
 325     /* LEDBAR Register */
 326     /* XXX: implement a 8-LED array */
 327     case 0x00408:
 328         s->leds = val & 0xff;
 329         break;
 330
 331     /* ASCIIWORD Register */
 332     case 0x00410:
 333         snprintf(s->display_text, 9, "%08X", val);
 334         malta_fpga_update_display(s);
 335         break;
 336
 337     /* ASCIIPOS0 to ASCIIPOS7 Registers */
 338     case 0x00418:
 339     case 0x00420:
 340     case 0x00428:
 341     case 0x00430:
 342     case 0x00438:
 343     case 0x00440:
 344     case 0x00448:
 345     case 0x00450:
 346         s->display_text[(saddr - 0x00418) >> 3] = (char) val;
 347         malta_fpga_update_display(s);
 348         break;
 349
 350     /* SOFTRES Register */
 351     case 0x00500:
 352         if (val == 0x42)
 353             qemu_system_reset_request ();
 354         break;
 355
 356     /* BRKRES Register */
 357     case 0x00508:
 358         s->brk = val & 0xff;
 359         break;
 360
 361     /* UART Registers are handled directly by the serial device */
 362
 363     /* GPOUT Register */
 364     case 0x00a00:
 365         s->gpout = val & 0xff;
 366         break;
 367
 368     /* I2COE Register */
 369     case 0x00b08:
 370         s->i2coe = val & 0x03;
 371         break;
 372
 373     /* I2COUT Register */
 374     case 0x00b10:
 375         eeprom24c0x_write(val & 0x02, val & 0x01);
 376         s->i2cout = val;
 377         break;
 378
 379     /* I2CSEL Register */
 380     case 0x00b18:
 381         s->i2csel = val & 0x01;
 382         break;
 383
 384     default:
 385 #if 0
 386         printf ("malta_fpga_write: Bad register offset 0x" TARGET_FMT_lx "\n",
 387                 addr);
 388 #endif
 389         break;
 390     }
 391 }
 392
 393 static CPUReadMemoryFunc * const malta_fpga_read[] = {
 394    malta_fpga_readl,
 395    malta_fpga_readl,
 396    malta_fpga_readl
 397 };
 398
 399 static CPUWriteMemoryFunc * const malta_fpga_write[] = {
 400    malta_fpga_writel,
 401    malta_fpga_writel,
 402    malta_fpga_writel
 403 };
 404
 405 static void malta_fpga_reset(void *opaque)
 406 {
 407     MaltaFPGAState *s = opaque;
 408
 409     s->leds   = 0x00;
 410     s->brk    = 0x0a;
 411     s->gpout  = 0x00;
 412     s->i2cin  = 0x3;
 413     s->i2coe  = 0x0;
 414     s->i2cout = 0x3;
 415     s->i2csel = 0x1;
 416
 417     s->display_text[8] = '\0';
 418     snprintf(s->display_text, 9, "        ");
 419 }
 420
 421 static void malta_fpga_led_init(CharDriverState *chr)
 422 {
 423     qemu_chr_printf(chr, "\e[HMalta LEDBAR\r\n");
 424     qemu_chr_printf(chr, "+--------+\r\n");
 425     qemu_chr_printf(chr, "+        +\r\n");
 426     qemu_chr_printf(chr, "+--------+\r\n");
 427     qemu_chr_printf(chr, "\n");
 428     qemu_chr_printf(chr, "Malta ASCII\r\n");
 429     qemu_chr_printf(chr, "+--------+\r\n");
 430     qemu_chr_printf(chr, "+        +\r\n");
 431     qemu_chr_printf(chr, "+--------+\r\n");
 432 }
 433
 434 static MaltaFPGAState *malta_fpga_init(target_phys_addr_t base, qemu_irq uart_irq, CharDriverState *uart_chr)
 435 {
 436     MaltaFPGAState *s;
 437     int malta;
 438
 439     s = (MaltaFPGAState *)qemu_mallocz(sizeof(MaltaFPGAState));
 440
 441     malta = cpu_register_io_memory(malta_fpga_read,
 442                                    malta_fpga_write, s);
 443
 444     cpu_register_physical_memory(base, 0x900, malta);
 445     /* 0xa00 is less than a page, so will still get the right offsets.  */
 446     cpu_register_physical_memory(base + 0xa00, 0x100000 - 0xa00, malta);
 447
 448     s->display = qemu_chr_open("fpga", "vc:320x200", malta_fpga_led_init);
 449
 450     s->uart = serial_mm_init(base + 0x900, 3, uart_irq, 230400, uart_chr, 1);
 451
 452     malta_fpga_reset(s);
 453     qemu_register_reset(malta_fpga_reset, s);
 454
 455     return s;
 456 }
 457
 458 /* Audio support */
 459 #ifdef HAS_AUDIO
 460 static void audio_init (PCIBus *pci_bus)
 461 {
 462     struct soundhw *c;
 463     int audio_enabled = 0;
 464
 465     for (c = soundhw; !audio_enabled && c->name; ++c) {
 466         audio_enabled = c->enabled;
 467     }
 468
 469     if (audio_enabled) {
 470         for (c = soundhw; c->name; ++c) {
 471             if (c->enabled) {
 472                 c->init.init_pci(pci_bus);
 473             }
 474         }
 475     }
 476 }
 477 #endif
 478
 479 /* Network support */
 480 static void network_init(void)
 481 {
 482     int i;
 483
 484     for(i = 0; i < nb_nics; i++) {
 485         NICInfo *nd = &nd_table[i];
 486         const char *default_devaddr = NULL;
 487
 488         if (i == 0 && (!nd->model || strcmp(nd->model, "pcnet") == 0))
 489             /* The malta board has a PCNet card using PCI SLOT 11 */
 490             default_devaddr = "0b";
 491
 492         pci_nic_init(nd, "pcnet", default_devaddr);
 493     }
 494 }
 495
 496 /* ROM and pseudo bootloader
 497
 498    The following code implements a very very simple bootloader. It first
 499    loads the registers a0 to a3 to the values expected by the OS, and
 500    then jump at the kernel address.
 501
 502    The bootloader should pass the locations of the kernel arguments and
 503    environment variables tables. Those tables contain the 32-bit address
 504    of NULL terminated strings. The environment variables table should be
 505    terminated by a NULL address.
 506
 507    For a simpler implementation, the number of kernel arguments is fixed
 508    to two (the name of the kernel and the command line), and the two
 509    tables are actually the same one.
 510
 511    The registers a0 to a3 should contain the following values:
 512      a0 - number of kernel arguments
 513      a1 - 32-bit address of the kernel arguments table
 514      a2 - 32-bit address of the environment variables table
 515      a3 - RAM size in bytes
 516 */
 517
 518 static void write_bootloader (CPUState *env, uint8_t *base,
 519                               int64_t kernel_entry)
 520 {
 521     uint32_t *p;
 522
 523     /* Small bootloader */
 524     p = (uint32_t *)base;
 525     stl_raw(p++, 0x0bf00160);                                      /* j 0x1fc00580 */
 526     stl_raw(p++, 0x00000000);                                      /* nop */
 527
 528     /* YAMON service vector */
 529     stl_raw(base + 0x500, 0xbfc00580);      /* start: */
 530     stl_raw(base + 0x504, 0xbfc0083c);      /* print_count: */
 531     stl_raw(base + 0x520, 0xbfc00580);      /* start: */
 532     stl_raw(base + 0x52c, 0xbfc00800);      /* flush_cache: */
 533     stl_raw(base + 0x534, 0xbfc00808);      /* print: */
 534     stl_raw(base + 0x538, 0xbfc00800);      /* reg_cpu_isr: */
 535     stl_raw(base + 0x53c, 0xbfc00800);      /* unred_cpu_isr: */
 536     stl_raw(base + 0x540, 0xbfc00800);      /* reg_ic_isr: */
 537     stl_raw(base + 0x544, 0xbfc00800);      /* unred_ic_isr: */
 538     stl_raw(base + 0x548, 0xbfc00800);      /* reg_esr: */
 539     stl_raw(base + 0x54c, 0xbfc00800);      /* unreg_esr: */
 540     stl_raw(base + 0x550, 0xbfc00800);      /* getchar: */
 541     stl_raw(base + 0x554, 0xbfc00800);      /* syscon_read: */
 542
 543
 544     /* Second part of the bootloader */
 545     p = (uint32_t *) (base + 0x580);
 546     stl_raw(p++, 0x24040002);                                      /* addiu a0, zero, 2 */
 547     stl_raw(p++, 0x3c1d0000 | (((ENVP_ADDR - 64) >> 16) & 0xffff)); /* lui sp, high(ENVP_ADDR) */
 548     stl_raw(p++, 0x37bd0000 | ((ENVP_ADDR - 64) & 0xffff));        /* ori sp, sp, low(ENVP_ADDR) */
 549     stl_raw(p++, 0x3c050000 | ((ENVP_ADDR >> 16) & 0xffff));       /* lui a1, high(ENVP_ADDR) */
 550     stl_raw(p++, 0x34a50000 | (ENVP_ADDR & 0xffff));               /* ori a1, a1, low(ENVP_ADDR) */
 551     stl_raw(p++, 0x3c060000 | (((ENVP_ADDR + 8) >> 16) & 0xffff)); /* lui a2, high(ENVP_ADDR + 8) */
 552     stl_raw(p++, 0x34c60000 | ((ENVP_ADDR + 8) & 0xffff));         /* ori a2, a2, low(ENVP_ADDR + 8) */
 553     stl_raw(p++, 0x3c070000 | (loaderparams.ram_size >> 16));     /* lui a3, high(ram_size) */
 554     stl_raw(p++, 0x34e70000 | (loaderparams.ram_size & 0xffff));  /* ori a3, a3, low(ram_size) */
 555
 556     /* Load BAR registers as done by YAMON */
 557     stl_raw(p++, 0x3c09b400);                                      /* lui t1, 0xb400 */
 558
 559 #ifdef TARGET_WORDS_BIGENDIAN
 560     stl_raw(p++, 0x3c08df00);                                      /* lui t0, 0xdf00 */
 561 #else
 562     stl_raw(p++, 0x340800df);                                      /* ori t0, r0, 0x00df */
 563 #endif
 564     stl_raw(p++, 0xad280068);                                      /* sw t0, 0x0068(t1) */
 565
 566     stl_raw(p++, 0x3c09bbe0);                                      /* lui t1, 0xbbe0 */
 567
 568 #ifdef TARGET_WORDS_BIGENDIAN
 569     stl_raw(p++, 0x3c08c000);                                      /* lui t0, 0xc000 */
 570 #else
 571     stl_raw(p++, 0x340800c0);                                      /* ori t0, r0, 0x00c0 */
 572 #endif
 573     stl_raw(p++, 0xad280048);                                      /* sw t0, 0x0048(t1) */
 574 #ifdef TARGET_WORDS_BIGENDIAN
 575     stl_raw(p++, 0x3c084000);                                      /* lui t0, 0x4000 */
 576 #else
 577     stl_raw(p++, 0x34080040);                                      /* ori t0, r0, 0x0040 */
 578 #endif
 579     stl_raw(p++, 0xad280050);                                      /* sw t0, 0x0050(t1) */
 580
 581 #ifdef TARGET_WORDS_BIGENDIAN
 582     stl_raw(p++, 0x3c088000);                                      /* lui t0, 0x8000 */
 583 #else
 584     stl_raw(p++, 0x34080080);                                      /* ori t0, r0, 0x0080 */
 585 #endif
 586     stl_raw(p++, 0xad280058);                                      /* sw t0, 0x0058(t1) */
 587 #ifdef TARGET_WORDS_BIGENDIAN
 588     stl_raw(p++, 0x3c083f00);                                      /* lui t0, 0x3f00 */
 589 #else
 590     stl_raw(p++, 0x3408003f);                                      /* ori t0, r0, 0x003f */
 591 #endif
 592     stl_raw(p++, 0xad280060);                                      /* sw t0, 0x0060(t1) */
 593
 594 #ifdef TARGET_WORDS_BIGENDIAN
 595     stl_raw(p++, 0x3c08c100);                                      /* lui t0, 0xc100 */
 596 #else
 597     stl_raw(p++, 0x340800c1);                                      /* ori t0, r0, 0x00c1 */
 598 #endif
 599     stl_raw(p++, 0xad280080);                                      /* sw t0, 0x0080(t1) */
 600 #ifdef TARGET_WORDS_BIGENDIAN
 601     stl_raw(p++, 0x3c085e00);                                      /* lui t0, 0x5e00 */
 602 #else
 603     stl_raw(p++, 0x3408005e);                                      /* ori t0, r0, 0x005e */
 604 #endif
 605     stl_raw(p++, 0xad280088);                                      /* sw t0, 0x0088(t1) */
 606
 607     /* Jump to kernel code */
 608     stl_raw(p++, 0x3c1f0000 | ((kernel_entry >> 16) & 0xffff));    /* lui ra, high(kernel_entry) */
 609     stl_raw(p++, 0x37ff0000 | (kernel_entry & 0xffff));            /* ori ra, ra, low(kernel_entry) */
 610     stl_raw(p++, 0x03e00008);                                      /* jr ra */
 611     stl_raw(p++, 0x00000000);                                      /* nop */
 612
 613     /* YAMON subroutines */
 614     p = (uint32_t *) (base + 0x800);
 615     stl_raw(p++, 0x03e00008);                                     /* jr ra */
 616     stl_raw(p++, 0x24020000);                                     /* li v0,0 */
 617    /* 808 YAMON print */
 618     stl_raw(p++, 0x03e06821);                                     /* move t5,ra */
 619     stl_raw(p++, 0x00805821);                                     /* move t3,a0 */
 620     stl_raw(p++, 0x00a05021);                                     /* move t2,a1 */
 621     stl_raw(p++, 0x91440000);                                     /* lbu a0,0(t2) */
 622     stl_raw(p++, 0x254a0001);                                     /* addiu t2,t2,1 */
 623     stl_raw(p++, 0x10800005);                                     /* beqz a0,834 */
 624     stl_raw(p++, 0x00000000);                                     /* nop */
 625     stl_raw(p++, 0x0ff0021c);                                     /* jal 870 */
 626     stl_raw(p++, 0x00000000);                                     /* nop */
 627     stl_raw(p++, 0x08000205);                                     /* j 814 */
 628     stl_raw(p++, 0x00000000);                                     /* nop */
 629     stl_raw(p++, 0x01a00008);                                     /* jr t5 */
 630     stl_raw(p++, 0x01602021);                                     /* move a0,t3 */
 631     /* 0x83c YAMON print_count */
 632     stl_raw(p++, 0x03e06821);                                     /* move t5,ra */
 633     stl_raw(p++, 0x00805821);                                     /* move t3,a0 */
 634     stl_raw(p++, 0x00a05021);                                     /* move t2,a1 */
 635     stl_raw(p++, 0x00c06021);                                     /* move t4,a2 */
 636     stl_raw(p++, 0x91440000);                                     /* lbu a0,0(t2) */
 637     stl_raw(p++, 0x0ff0021c);                                     /* jal 870 */
 638     stl_raw(p++, 0x00000000);                                     /* nop */
 639     stl_raw(p++, 0x254a0001);                                     /* addiu t2,t2,1 */
 640     stl_raw(p++, 0x258cffff);                                     /* addiu t4,t4,-1 */
 641     stl_raw(p++, 0x1580fffa);                                     /* bnez t4,84c */
 642     stl_raw(p++, 0x00000000);                                     /* nop */
 643     stl_raw(p++, 0x01a00008);                                     /* jr t5 */
 644     stl_raw(p++, 0x01602021);                                     /* move a0,t3 */
 645     /* 0x870 */
 646     stl_raw(p++, 0x3c08b800);                                     /* lui t0,0xb400 */
 647     stl_raw(p++, 0x350803f8);                                     /* ori t0,t0,0x3f8 */
 648     stl_raw(p++, 0x91090005);                                     /* lbu t1,5(t0) */
 649     stl_raw(p++, 0x00000000);                                     /* nop */
 650     stl_raw(p++, 0x31290040);                                     /* andi t1,t1,0x40 */
 651     stl_raw(p++, 0x1120fffc);                                     /* beqz t1,878 <outch+0x8> */
 652     stl_raw(p++, 0x00000000);                                     /* nop */
 653     stl_raw(p++, 0x03e00008);                                     /* jr ra */
 654     stl_raw(p++, 0xa1040000);                                     /* sb a0,0(t0) */
 655
 656 }
 657
 658 static void prom_set(int index, const char *string, ...)
 659 {
 660     char buf[ENVP_ENTRY_SIZE];
 661     target_phys_addr_t p;
 662     va_list ap;
 663     int32_t table_addr;
 664
 665     if (index >= ENVP_NB_ENTRIES)
 666         return;
 667
 668     p = ENVP_ADDR + VIRT_TO_PHYS_ADDEND + index * 4;
 669
 670     if (string == NULL) {
 671         stl_phys(p, 0);
 672         return;
 673     }
 674
 675     table_addr = ENVP_ADDR + sizeof(int32_t) * ENVP_NB_ENTRIES
 676                  + index * ENVP_ENTRY_SIZE;
 677     stl_phys(p, table_addr);
 678
 679     va_start(ap, string);
 680     vsnprintf(buf, ENVP_ENTRY_SIZE, string, ap);
 681     va_end(ap);
 682     pstrcpy_targphys(table_addr + VIRT_TO_PHYS_ADDEND, ENVP_ENTRY_SIZE, buf);
 683 }
 684
 685 /* Kernel */
 686 static int64_t load_kernel (CPUState *env)
 687 {
 688     int64_t kernel_entry, kernel_low, kernel_high;
 689     int index = 0;
 690     long initrd_size;
 691     ram_addr_t initrd_offset;
 692     int big_endian;
 693
 694 #ifdef TARGET_WORDS_BIGENDIAN
 695     big_endian = 1;
 696 #else
 697     big_endian = 0;
 698 #endif
 699
 700     if (load_elf(loaderparams.kernel_filename, VIRT_TO_PHYS_ADDEND,
 701                  (uint64_t *)&kernel_entry, (uint64_t *)&kernel_low,
 702                  (uint64_t *)&kernel_high, big_endian, ELF_MACHINE, 1) < 0) {
 703         fprintf(stderr, "qemu: could not load kernel '%s'\n",
 704                 loaderparams.kernel_filename);
 705         exit(1);
 706     }
 707
 708     /* load initrd */
 709     initrd_size = 0;
 710     initrd_offset = 0;
 711     if (loaderparams.initrd_filename) {
 712         initrd_size = get_image_size (loaderparams.initrd_filename);
 713         if (initrd_size > 0) {
 714             initrd_offset = (kernel_high + ~TARGET_PAGE_MASK) & TARGET_PAGE_MASK;
 715             if (initrd_offset + initrd_size > ram_size) {
 716                 fprintf(stderr,
 717                         "qemu: memory too small for initial ram disk '%s'\n",
 718                         loaderparams.initrd_filename);
 719                 exit(1);
 720             }
 721             initrd_size = load_image_targphys(loaderparams.initrd_filename,
 722                                               initrd_offset,
 723                                               ram_size - initrd_offset);
 724         }
 725         if (initrd_size == (target_ulong) -1) {
 726             fprintf(stderr, "qemu: could not load initial ram disk '%s'\n",
 727                     loaderparams.initrd_filename);
 728             exit(1);
 729         }
 730     }
 731
 732     /* Store command line.  */
 733     prom_set(index++, loaderparams.kernel_filename);
 734     if (initrd_size > 0)
 735         prom_set(index++, "rd_start=0x" TARGET_FMT_lx " rd_size=%li %s",
 736                  PHYS_TO_VIRT(initrd_offset), initrd_size,
 737                  loaderparams.kernel_cmdline);
 738     else
 739         prom_set(index++, loaderparams.kernel_cmdline);
 740
 741     /* Setup minimum environment variables */
 742     prom_set(index++, "memsize");
 743     prom_set(index++, "%i", loaderparams.ram_size);
 744     prom_set(index++, "modetty0");
 745     prom_set(index++, "38400n8r");
 746     prom_set(index++, NULL);
 747
 748     return kernel_entry;
 749 }
 750
 751 static void main_cpu_reset(void *opaque)
 752 {
 753     CPUState *env = opaque;
 754     cpu_reset(env);
 755
 756     /* The bootload does not need to be rewritten as it is located in a
 757        read only location. The kernel location and the arguments table
 758        location does not change. */
 759     if (loaderparams.kernel_filename) {
 760         env->CP0_Status &= ~((1 << CP0St_BEV) | (1 << CP0St_ERL));
 761         load_kernel (env);
 762     }
 763 }
 764
 765 static
 766 void mips_malta_init (ram_addr_t ram_size,
 767                       const char *boot_device,
 768                       const char *kernel_filename, const char *kernel_cmdline,
 769                       const char *initrd_filename, const char *cpu_model)
 770 {
 771     char *filename;
 772     ram_addr_t ram_offset;
 773     ram_addr_t bios_offset;
 774     target_long bios_size;
 775     int64_t kernel_entry;
 776     PCIBus *pci_bus;
 777     ISADevice *isa_dev;
 778     CPUState *env;
 779     RTCState *rtc_state;
 780     fdctrl_t *floppy_controller;
 781     MaltaFPGAState *malta_fpga;
 782     qemu_irq *i8259;
 783     int piix4_devfn;
 784     uint8_t *eeprom_buf;
 785     i2c_bus *smbus;
 786     int i;
 787     DriveInfo *dinfo;
 788     DriveInfo *hd[MAX_IDE_BUS * MAX_IDE_DEVS];
 789     BlockDriverState *fd[MAX_FD];
 790     int fl_idx = 0;
 791     int fl_sectors = 0;
 792
 793     /* Make sure the first 3 serial ports are associated with a device. */
 794     for(i = 0; i < 3; i++) {
 795         if (!serial_hds[i]) {
 796             char label[32];
 797             snprintf(label, sizeof(label), "serial%d", i);
 798             serial_hds[i] = qemu_chr_open(label, "null", NULL);
 799         }
 800     }
 801
 802     /* init CPUs */
 803     if (cpu_model == NULL) {
 804 #ifdef TARGET_MIPS64
 805         cpu_model = "20Kc";
 806 #else
 807         cpu_model = "24Kf";
 808 #endif
 809     }
 810     env = cpu_init(cpu_model);
 811     if (!env) {
 812         fprintf(stderr, "Unable to find CPU definition\n");
 813         exit(1);
 814     }
 815     qemu_register_reset(main_cpu_reset, env);
 816
 817     /* allocate RAM */
 818     if (ram_size > (256 << 20)) {
 819         fprintf(stderr,
 820                 "qemu: Too much memory for this machine: %d MB, maximum 256 MB\n",
 821                 ((unsigned int)ram_size / (1 << 20)));
 822         exit(1);
 823     }
 824     ram_offset = qemu_ram_alloc(ram_size);
 825     bios_offset = qemu_ram_alloc(BIOS_SIZE);
 826
 827
 828     cpu_register_physical_memory(0, ram_size, ram_offset | IO_MEM_RAM);
 829
 830     /* Map the bios at two physical locations, as on the real board. */
 831     cpu_register_physical_memory(0x1e000000LL,
 832                                  BIOS_SIZE, bios_offset | IO_MEM_ROM);
 833     cpu_register_physical_memory(0x1fc00000LL,
 834                                  BIOS_SIZE, bios_offset | IO_MEM_ROM);
 835
 836     /* FPGA */
 837     malta_fpga = malta_fpga_init(0x1f000000LL, env->irq[2], serial_hds[2]);
 838
 839     /* Load firmware in flash / BIOS unless we boot directly into a kernel. */
 840     if (kernel_filename) {
 841         /* Write a small bootloader to the flash location. */
 842         loaderparams.ram_size = ram_size;
 843         loaderparams.kernel_filename = kernel_filename;
 844         loaderparams.kernel_cmdline = kernel_cmdline;
 845         loaderparams.initrd_filename = initrd_filename;
 846         kernel_entry = load_kernel(env);
 847         env->CP0_Status &= ~((1 << CP0St_BEV) | (1 << CP0St_ERL));
 848         write_bootloader(env, qemu_get_ram_ptr(bios_offset), kernel_entry);
 849     } else {
 850         dinfo = drive_get(IF_PFLASH, 0, fl_idx);
 851         if (dinfo) {
 852             /* Load firmware from flash. */
 853             bios_size = 0x400000;
 854             fl_sectors = bios_size >> 16;
 855 #ifdef DEBUG_BOARD_INIT
 856             printf("Register parallel flash %d size " TARGET_FMT_lx " at "
 857                    "offset %08lx addr %08llx '%s' %x\n",
 858                    fl_idx, bios_size, bios_offset, 0x1e000000LL,
 859                    bdrv_get_device_name(dinfo->bdrv), fl_sectors);
 860 #endif
 861             pflash_cfi01_register(0x1e000000LL, bios_offset,
 862                                   dinfo->bdrv, 65536, fl_sectors,
 863                                   4, 0x0000, 0x0000, 0x0000, 0x0000);
 864             fl_idx++;
 865         } else {
 866             /* Load a BIOS image. */
 867             if (bios_name == NULL)
 868                 bios_name = BIOS_FILENAME;
 869             filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
 870             if (filename) {
 871                 bios_size = load_image_targphys(filename, 0x1fc00000LL,
 872                                                 BIOS_SIZE);
 873                 qemu_free(filename);
 874             } else {
 875                 bios_size = -1;
 876             }
 877             if ((bios_size < 0 || bios_size > BIOS_SIZE) && !kernel_filename) {
 878                 fprintf(stderr,
 879                         "qemu: Could not load MIPS bios '%s', and no -kernel argument was specified\n",
 880                         bios_name);
 881                 exit(1);
 882             }
 883         }
 884         /* In little endian mode the 32bit words in the bios are swapped,
 885            a neat trick which allows bi-endian firmware. */
 886 #ifndef TARGET_WORDS_BIGENDIAN
 887         {
 888             uint32_t *addr = qemu_get_ram_ptr(bios_offset);;
 889             uint32_t *end = addr + bios_size;
 890             while (addr < end) {
 891                 bswap32s(addr);
 892             }
 893         }
 894 #endif
 895     }
 896
 897     /* Board ID = 0x420 (Malta Board with CoreLV)
 898        XXX: theoretically 0x1e000010 should map to flash and 0x1fc00010 should
 899        map to the board ID. */
 900     stl_phys(0x1fc00010LL, 0x00000420);
 901
 902     /* Init internal devices */
 903     cpu_mips_irq_init_cpu(env);
 904     cpu_mips_clock_init(env);
 905
 906     /* Interrupt controller */
 907     /* The 8259 is attached to the MIPS CPU INT0 pin, ie interrupt 2 */
 908     i8259 = i8259_init(env->irq[2]);
 909
 910     /* Northbridge */
 911     pci_bus = pci_gt64120_init(i8259);
 912
 913     /* Southbridge */
 914
 915     if (drive_get_max_bus(IF_IDE) >= MAX_IDE_BUS) {
 916         fprintf(stderr, "qemu: too many IDE bus\n");
 917         exit(1);
 918     }
 919
 920     for(i = 0; i < MAX_IDE_BUS * MAX_IDE_DEVS; i++) {
 921         hd[i] = drive_get(IF_IDE, i / MAX_IDE_DEVS, i % MAX_IDE_DEVS);
 922     }
 923
 924     piix4_devfn = piix4_init(pci_bus, 80);
 925     isa_bus_irqs(i8259);
 926     pci_piix4_ide_init(pci_bus, hd, piix4_devfn + 1);
 927     usb_uhci_piix4_init(pci_bus, piix4_devfn + 2);
 928     smbus = piix4_pm_init(pci_bus, piix4_devfn + 3, 0x1100, isa_reserve_irq(9));
 929     eeprom_buf = qemu_mallocz(8 * 256); /* XXX: make this persistent */
 930     for (i = 0; i < 8; i++) {
 931         /* TODO: Populate SPD eeprom data.  */
 932         DeviceState *eeprom;
 933         eeprom = qdev_create((BusState *)smbus, "smbus-eeprom");
 934         qdev_prop_set_uint32(eeprom, "address", 0x50 + i);
 935         qdev_prop_set_ptr(eeprom, "data", eeprom_buf + (i * 256));
 936         qdev_init(eeprom);
 937     }
 938     pit = pit_init(0x40, isa_reserve_irq(0));
 939     DMA_init(0);
 940
 941     /* Super I/O */
 942     isa_dev = isa_create_simple("i8042");
 943
 944     rtc_state = rtc_init(2000);
 945     serial_init(0x3f8, isa_reserve_irq(4), 115200, serial_hds[0]);
 946     serial_init(0x2f8, isa_reserve_irq(3), 115200, serial_hds[1]);
 947     if (parallel_hds[0])
 948         parallel_init(0x378, isa_reserve_irq(7), parallel_hds[0]);
 949     for(i = 0; i < MAX_FD; i++) {
 950         dinfo = drive_get(IF_FLOPPY, 0, i);
 951         fd[i] = dinfo ? dinfo->bdrv : NULL;
 952     }
 953     floppy_controller = fdctrl_init_isa(fd);
 954
 955     /* Sound card */
 956 #ifdef HAS_AUDIO
 957     audio_init(pci_bus);
 958 #endif
 959
 960     /* Network card */
 961     network_init();
 962
 963     /* Optional PCI video card */
 964     if (cirrus_vga_enabled) {
 965         pci_cirrus_vga_init(pci_bus);
 966     } else if (vmsvga_enabled) {
 967         pci_vmsvga_init(pci_bus);
 968     } else if (std_vga_enabled) {
 969         pci_vga_init(pci_bus, 0, 0);
 970     }
 971 }
 972
 973 static QEMUMachine mips_malta_machine = {
 974     .name = "malta",
 975     .desc = "MIPS Malta Core LV",
 976     .init = mips_malta_init,
 977     .is_default = 1,
 978 };
 979
 980 static void mips_malta_machine_init(void)
 981 {
 982     qemu_register_machine(&mips_malta_machine);
 983 }
 984
 985 machine_init(mips_malta_machine_init);