hw/onenand.c

   1 /*
   2  * OneNAND flash memories emulation.
   3  *
   4  * Copyright (C) 2008 Nokia Corporation
   5  * Written by Andrzej Zaborowski <andrew@openedhand.com>
   6  *
   7  * This program is free software; you can redistribute it and/or
   8  * modify it under the terms of the GNU General Public License as
   9  * published by the Free Software Foundation; either version 2 or
  10  * (at your option) version 3 of the License.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License along
  18  * with this program; if not, see <http://www.gnu.org/licenses/>.
  19  */
  20
  21 #include "qemu-common.h"
  22 #include "hw.h"
  23 #include "flash.h"
  24 #include "irq.h"
  25 #include "blockdev.h"
  26
  27 /* 11 for 2kB-page OneNAND ("2nd generation") and 10 for 1kB-page chips */
  28 #define PAGE_SHIFT      11
  29
  30 /* Fixed */
  31 #define BLOCK_SHIFT     (PAGE_SHIFT + 6)
  32
  33 typedef struct {
  34     uint32_t id;
  35     int shift;
  36     target_phys_addr_t base;
  37     qemu_irq intr;
  38     qemu_irq rdy;
  39     BlockDriverState *bdrv;
  40     BlockDriverState *bdrv_cur;
  41     uint8_t *image;
  42     uint8_t *otp;
  43     uint8_t *current;
  44     ram_addr_t ram;
  45     uint8_t *boot[2];
  46     uint8_t *data[2][2];
  47     int iomemtype;
  48     int cycle;
  49     int otpmode;
  50
  51     uint16_t addr[8];
  52     uint16_t unladdr[8];
  53     int bufaddr;
  54     int count;
  55     uint16_t command;
  56     uint16_t config[2];
  57     uint16_t status;
  58     uint16_t intstatus;
  59     uint16_t wpstatus;
  60
  61     ECCState ecc;
  62
  63     int density_mask;
  64     int secs;
  65     int secs_cur;
  66     int blocks;
  67     uint8_t *blockwp;
  68 } OneNANDState;
  69
  70 enum {
  71     ONEN_BUF_BLOCK = 0,
  72     ONEN_BUF_BLOCK2 = 1,
  73     ONEN_BUF_DEST_BLOCK = 2,
  74     ONEN_BUF_DEST_PAGE = 3,
  75     ONEN_BUF_PAGE = 7,
  76 };
  77
  78 enum {
  79     ONEN_ERR_CMD = 1 << 10,
  80     ONEN_ERR_ERASE = 1 << 11,
  81     ONEN_ERR_PROG = 1 << 12,
  82     ONEN_ERR_LOAD = 1 << 13,
  83 };
  84
  85 enum {
  86     ONEN_INT_RESET = 1 << 4,
  87     ONEN_INT_ERASE = 1 << 5,
  88     ONEN_INT_PROG = 1 << 6,
  89     ONEN_INT_LOAD = 1 << 7,
  90     ONEN_INT = 1 << 15,
  91 };
  92
  93 enum {
  94     ONEN_LOCK_LOCKTIGHTEN = 1 << 0,
  95     ONEN_LOCK_LOCKED = 1 << 1,
  96     ONEN_LOCK_UNLOCKED = 1 << 2,
  97 };
  98
  99 void onenand_base_update(void *opaque, target_phys_addr_t new)
 100 {
 101     OneNANDState *s = (OneNANDState *) opaque;
 102
 103     s->base = new;
 104
 105     /* XXX: We should use IO_MEM_ROMD but we broke it earlier...
 106      * Both 0x0000 ... 0x01ff and 0x8000 ... 0x800f can be used to
 107      * write boot commands.  Also take note of the BWPS bit.  */
 108     cpu_register_physical_memory(s->base + (0x0000 << s->shift),
 109                     0x0200 << s->shift, s->iomemtype);
 110     cpu_register_physical_memory(s->base + (0x0200 << s->shift),
 111                     0xbe00 << s->shift,
 112                     (s->ram +(0x0200 << s->shift)) | IO_MEM_RAM);
 113     if (s->iomemtype)
 114         cpu_register_physical_memory_offset(s->base + (0xc000 << s->shift),
 115                     0x4000 << s->shift, s->iomemtype, (0xc000 << s->shift));
 116 }
 117
 118 void onenand_base_unmap(void *opaque)
 119 {
 120     OneNANDState *s = (OneNANDState *) opaque;
 121
 122     cpu_register_physical_memory(s->base,
 123                     0x10000 << s->shift, IO_MEM_UNASSIGNED);
 124 }
 125
 126 static void onenand_intr_update(OneNANDState *s)
 127 {
 128     qemu_set_irq(s->intr, ((s->intstatus >> 15) ^ (~s->config[0] >> 6)) & 1);
 129 }
 130
 131 /* Hot reset (Reset OneNAND command) or warm reset (RP pin low) */
 132 static void onenand_reset(OneNANDState *s, int cold)
 133 {
 134     memset(&s->addr, 0, sizeof(s->addr));
 135     s->command = 0;
 136     s->count = 1;
 137     s->bufaddr = 0;
 138     s->config[0] = 0x40c0;
 139     s->config[1] = 0x0000;
 140     onenand_intr_update(s);
 141     qemu_irq_raise(s->rdy);
 142     s->status = 0x0000;
 143     s->intstatus = cold ? 0x8080 : 0x8010;
 144     s->unladdr[0] = 0;
 145     s->unladdr[1] = 0;
 146     s->wpstatus = 0x0002;
 147     s->cycle = 0;
 148     s->otpmode = 0;
 149     s->bdrv_cur = s->bdrv;
 150     s->current = s->image;
 151     s->secs_cur = s->secs;
 152
 153     if (cold) {
 154         /* Lock the whole flash */
 155         memset(s->blockwp, ONEN_LOCK_LOCKED, s->blocks);
 156
 157         if (s->bdrv && bdrv_read(s->bdrv, 0, s->boot[0], 8) < 0)
 158             hw_error("%s: Loading the BootRAM failed.\n", __FUNCTION__);
 159     }
 160 }
 161
 162 static inline int onenand_load_main(OneNANDState *s, int sec, int secn,
 163                 void *dest)
 164 {
 165     if (s->bdrv_cur)
 166         return bdrv_read(s->bdrv_cur, sec, dest, secn) < 0;
 167     else if (sec + secn > s->secs_cur)
 168         return 1;
 169
 170     memcpy(dest, s->current + (sec << 9), secn << 9);
 171
 172     return 0;
 173 }
 174
 175 static inline int onenand_prog_main(OneNANDState *s, int sec, int secn,
 176                 void *src)
 177 {
 178     if (s->bdrv_cur)
 179         return bdrv_write(s->bdrv_cur, sec, src, secn) < 0;
 180     else if (sec + secn > s->secs_cur)
 181         return 1;
 182
 183     memcpy(s->current + (sec << 9), src, secn << 9);
 184
 185     return 0;
 186 }
 187
 188 static inline int onenand_load_spare(OneNANDState *s, int sec, int secn,
 189                 void *dest)
 190 {
 191     uint8_t buf[512];
 192
 193     if (s->bdrv_cur) {
 194         if (bdrv_read(s->bdrv_cur, s->secs_cur + (sec >> 5), buf, 1) < 0)
 195             return 1;
 196         memcpy(dest, buf + ((sec & 31) << 4), secn << 4);
 197     } else if (sec + secn > s->secs_cur)
 198         return 1;
 199     else
 200         memcpy(dest, s->current + (s->secs_cur << 9) + (sec << 4), secn << 4);
 201
 202     return 0;
 203 }
 204
 205 static inline int onenand_prog_spare(OneNANDState *s, int sec, int secn,
 206                 void *src)
 207 {
 208     uint8_t buf[512];
 209
 210     if (s->bdrv_cur) {
 211         if (bdrv_read(s->bdrv_cur, s->secs_cur + (sec >> 5), buf, 1) < 0)
 212             return 1;
 213         memcpy(buf + ((sec & 31) << 4), src, secn << 4);
 214         return bdrv_write(s->bdrv_cur, s->secs_cur + (sec >> 5), buf, 1) < 0;
 215     } else if (sec + secn > s->secs_cur)
 216         return 1;
 217
 218     memcpy(s->current + (s->secs_cur << 9) + (sec << 4), src, secn << 4);
 219
 220     return 0;
 221 }
 222
 223 static inline int onenand_erase(OneNANDState *s, int sec, int num)
 224 {
 225     /* TODO: optimise */
 226     uint8_t buf[512];
 227
 228     memset(buf, 0xff, sizeof(buf));
 229     for (; num > 0; num --, sec ++) {
 230         if (onenand_prog_main(s, sec, 1, buf))
 231             return 1;
 232         if (onenand_prog_spare(s, sec, 1, buf))
 233             return 1;
 234     }
 235
 236     return 0;
 237 }
 238
 239 static void onenand_command(OneNANDState *s, int cmd)
 240 {
 241     int b;
 242     int sec;
 243     void *buf;
 244 #define SETADDR(block, page)                    \
 245     sec = (s->addr[page] & 3) +                 \
 246             ((((s->addr[page] >> 2) & 0x3f) +   \
 247               (((s->addr[block] & 0xfff) |      \
 248                 (s->addr[block] >> 15 ?         \
 249                  s->density_mask : 0)) << 6)) << (PAGE_SHIFT - 9));
 250 #define SETBUF_M()                              \
 251     buf = (s->bufaddr & 8) ?                    \
 252             s->data[(s->bufaddr >> 2) & 1][0] : s->boot[0];     \
 253     buf += (s->bufaddr & 3) << 9;
 254 #define SETBUF_S()                              \
 255     buf = (s->bufaddr & 8) ?                    \
 256             s->data[(s->bufaddr >> 2) & 1][1] : s->boot[1];     \
 257     buf += (s->bufaddr & 3) << 4;
 258
 259     switch (cmd) {
 260     case 0x00:  /* Load single/multiple sector data unit into buffer */
 261         SETADDR(ONEN_BUF_BLOCK, ONEN_BUF_PAGE)
 262
 263         SETBUF_M()
 264         if (onenand_load_main(s, sec, s->count, buf))
 265             s->status |= ONEN_ERR_CMD | ONEN_ERR_LOAD;
 266
 267 #if 0
 268         SETBUF_S()
 269         if (onenand_load_spare(s, sec, s->count, buf))
 270             s->status |= ONEN_ERR_CMD | ONEN_ERR_LOAD;
 271 #endif
 272
 273         /* TODO: if (s->bufaddr & 3) + s->count was > 4 (2k-pages)
 274          * or    if (s->bufaddr & 1) + s->count was > 2 (1k-pages)
 275          * then we need two split the read/write into two chunks.
 276          */
 277         s->intstatus |= ONEN_INT | ONEN_INT_LOAD;
 278         break;
 279     case 0x13:  /* Load single/multiple spare sector into buffer */
 280         SETADDR(ONEN_BUF_BLOCK, ONEN_BUF_PAGE)
 281
 282         SETBUF_S()
 283         if (onenand_load_spare(s, sec, s->count, buf))
 284             s->status |= ONEN_ERR_CMD | ONEN_ERR_LOAD;
 285
 286         /* TODO: if (s->bufaddr & 3) + s->count was > 4 (2k-pages)
 287          * or    if (s->bufaddr & 1) + s->count was > 2 (1k-pages)
 288          * then we need two split the read/write into two chunks.
 289          */
 290         s->intstatus |= ONEN_INT | ONEN_INT_LOAD;
 291         break;
 292     case 0x80:  /* Program single/multiple sector data unit from buffer */
 293         SETADDR(ONEN_BUF_BLOCK, ONEN_BUF_PAGE)
 294
 295         SETBUF_M()
 296         if (onenand_prog_main(s, sec, s->count, buf))
 297             s->status |= ONEN_ERR_CMD | ONEN_ERR_PROG;
 298
 299 #if 0
 300         SETBUF_S()
 301         if (onenand_prog_spare(s, sec, s->count, buf))
 302             s->status |= ONEN_ERR_CMD | ONEN_ERR_PROG;
 303 #endif
 304
 305         /* TODO: if (s->bufaddr & 3) + s->count was > 4 (2k-pages)
 306          * or    if (s->bufaddr & 1) + s->count was > 2 (1k-pages)
 307          * then we need two split the read/write into two chunks.
 308          */
 309         s->intstatus |= ONEN_INT | ONEN_INT_PROG;
 310         break;
 311     case 0x1a:  /* Program single/multiple spare area sector from buffer */
 312         SETADDR(ONEN_BUF_BLOCK, ONEN_BUF_PAGE)
 313
 314         SETBUF_S()
 315         if (onenand_prog_spare(s, sec, s->count, buf))
 316             s->status |= ONEN_ERR_CMD | ONEN_ERR_PROG;
 317
 318         /* TODO: if (s->bufaddr & 3) + s->count was > 4 (2k-pages)
 319          * or    if (s->bufaddr & 1) + s->count was > 2 (1k-pages)
 320          * then we need two split the read/write into two chunks.
 321          */
 322         s->intstatus |= ONEN_INT | ONEN_INT_PROG;
 323         break;
 324     case 0x1b:  /* Copy-back program */
 325         SETBUF_S()
 326
 327         SETADDR(ONEN_BUF_BLOCK, ONEN_BUF_PAGE)
 328         if (onenand_load_main(s, sec, s->count, buf))
 329             s->status |= ONEN_ERR_CMD | ONEN_ERR_PROG;
 330
 331         SETADDR(ONEN_BUF_DEST_BLOCK, ONEN_BUF_DEST_PAGE)
 332         if (onenand_prog_main(s, sec, s->count, buf))
 333             s->status |= ONEN_ERR_CMD | ONEN_ERR_PROG;
 334
 335         /* TODO: spare areas */
 336
 337         s->intstatus |= ONEN_INT | ONEN_INT_PROG;
 338         break;
 339
 340     case 0x23:  /* Unlock NAND array block(s) */
 341         s->intstatus |= ONEN_INT;
 342
 343         /* XXX the previous (?) area should be locked automatically */
 344         for (b = s->unladdr[0]; b <= s->unladdr[1]; b ++) {
 345             if (b >= s->blocks) {
 346                 s->status |= ONEN_ERR_CMD;
 347                 break;
 348             }
 349             if (s->blockwp[b] == ONEN_LOCK_LOCKTIGHTEN)
 350                 break;
 351
 352             s->wpstatus = s->blockwp[b] = ONEN_LOCK_UNLOCKED;
 353         }
 354         break;
 355     case 0x27:  /* Unlock All NAND array blocks */
 356         s->intstatus |= ONEN_INT;
 357
 358         for (b = 0; b < s->blocks; b ++) {
 359             if (b >= s->blocks) {
 360                 s->status |= ONEN_ERR_CMD;
 361                 break;
 362             }
 363             if (s->blockwp[b] == ONEN_LOCK_LOCKTIGHTEN)
 364                 break;
 365
 366             s->wpstatus = s->blockwp[b] = ONEN_LOCK_UNLOCKED;
 367         }
 368         break;
 369
 370     case 0x2a:  /* Lock NAND array block(s) */
 371         s->intstatus |= ONEN_INT;
 372
 373         for (b = s->unladdr[0]; b <= s->unladdr[1]; b ++) {
 374             if (b >= s->blocks) {
 375                 s->status |= ONEN_ERR_CMD;
 376                 break;
 377             }
 378             if (s->blockwp[b] == ONEN_LOCK_LOCKTIGHTEN)
 379                 break;
 380
 381             s->wpstatus = s->blockwp[b] = ONEN_LOCK_LOCKED;
 382         }
 383         break;
 384     case 0x2c:  /* Lock-tight NAND array block(s) */
 385         s->intstatus |= ONEN_INT;
 386
 387         for (b = s->unladdr[0]; b <= s->unladdr[1]; b ++) {
 388             if (b >= s->blocks) {
 389                 s->status |= ONEN_ERR_CMD;
 390                 break;
 391             }
 392             if (s->blockwp[b] == ONEN_LOCK_UNLOCKED)
 393                 continue;
 394
 395             s->wpstatus = s->blockwp[b] = ONEN_LOCK_LOCKTIGHTEN;
 396         }
 397         break;
 398
 399     case 0x71:  /* Erase-Verify-Read */
 400         s->intstatus |= ONEN_INT;
 401         break;
 402     case 0x95:  /* Multi-block erase */
 403         qemu_irq_pulse(s->intr);
 404         /* Fall through.  */
 405     case 0x94:  /* Block erase */
 406         sec = ((s->addr[ONEN_BUF_BLOCK] & 0xfff) |
 407                         (s->addr[ONEN_BUF_BLOCK] >> 15 ? s->density_mask : 0))
 408                 << (BLOCK_SHIFT - 9);
 409         if (onenand_erase(s, sec, 1 << (BLOCK_SHIFT - 9)))
 410             s->status |= ONEN_ERR_CMD | ONEN_ERR_ERASE;
 411
 412         s->intstatus |= ONEN_INT | ONEN_INT_ERASE;
 413         break;
 414     case 0xb0:  /* Erase suspend */
 415         break;
 416     case 0x30:  /* Erase resume */
 417         s->intstatus |= ONEN_INT | ONEN_INT_ERASE;
 418         break;
 419
 420     case 0xf0:  /* Reset NAND Flash core */
 421         onenand_reset(s, 0);
 422         break;
 423     case 0xf3:  /* Reset OneNAND */
 424         onenand_reset(s, 0);
 425         break;
 426
 427     case 0x65:  /* OTP Access */
 428         s->intstatus |= ONEN_INT;
 429         s->bdrv_cur = NULL;
 430         s->current = s->otp;
 431         s->secs_cur = 1 << (BLOCK_SHIFT - 9);
 432         s->addr[ONEN_BUF_BLOCK] = 0;
 433         s->otpmode = 1;
 434         break;
 435
 436     default:
 437         s->status |= ONEN_ERR_CMD;
 438         s->intstatus |= ONEN_INT;
 439         fprintf(stderr, "%s: unknown OneNAND command %x\n",
 440                         __FUNCTION__, cmd);
 441     }
 442
 443     onenand_intr_update(s);
 444 }
 445
 446 static uint32_t onenand_read(void *opaque, target_phys_addr_t addr)
 447 {
 448     OneNANDState *s = (OneNANDState *) opaque;
 449     int offset = addr >> s->shift;
 450
 451     switch (offset) {
 452     case 0x0000 ... 0xc000:
 453         return lduw_le_p(s->boot[0] + addr);
 454
 455     case 0xf000:        /* Manufacturer ID */
 456         return (s->id >> 16) & 0xff;
 457     case 0xf001:        /* Device ID */
 458         return (s->id >>  8) & 0xff;
 459     /* TODO: get the following values from a real chip!  */
 460     case 0xf002:        /* Version ID */
 461         return (s->id >>  0) & 0xff;
 462     case 0xf003:        /* Data Buffer size */
 463         return 1 << PAGE_SHIFT;
 464     case 0xf004:        /* Boot Buffer size */
 465         return 0x200;
 466     case 0xf005:        /* Amount of buffers */
 467         return 1 | (2 << 8);
 468     case 0xf006:        /* Technology */
 469         return 0;
 470
 471     case 0xf100 ... 0xf107:     /* Start addresses */
 472         return s->addr[offset - 0xf100];
 473
 474     case 0xf200:        /* Start buffer */
 475         return (s->bufaddr << 8) | ((s->count - 1) & (1 << (PAGE_SHIFT - 10)));
 476
 477     case 0xf220:        /* Command */
 478         return s->command;
 479     case 0xf221:        /* System Configuration 1 */
 480         return s->config[0] & 0xffe0;
 481     case 0xf222:        /* System Configuration 2 */
 482         return s->config[1];
 483
 484     case 0xf240:        /* Controller Status */
 485         return s->status;
 486     case 0xf241:        /* Interrupt */
 487         return s->intstatus;
 488     case 0xf24c:        /* Unlock Start Block Address */
 489         return s->unladdr[0];
 490     case 0xf24d:        /* Unlock End Block Address */
 491         return s->unladdr[1];
 492     case 0xf24e:        /* Write Protection Status */
 493         return s->wpstatus;
 494
 495     case 0xff00:        /* ECC Status */
 496         return 0x00;
 497     case 0xff01:        /* ECC Result of main area data */
 498     case 0xff02:        /* ECC Result of spare area data */
 499     case 0xff03:        /* ECC Result of main area data */
 500     case 0xff04:        /* ECC Result of spare area data */
 501         hw_error("%s: imeplement ECC\n", __FUNCTION__);
 502         return 0x0000;
 503     }
 504
 505     fprintf(stderr, "%s: unknown OneNAND register %x\n",
 506                     __FUNCTION__, offset);
 507     return 0;
 508 }
 509
 510 static void onenand_write(void *opaque, target_phys_addr_t addr,
 511                 uint32_t value)
 512 {
 513     OneNANDState *s = (OneNANDState *) opaque;
 514     int offset = addr >> s->shift;
 515     int sec;
 516
 517     switch (offset) {
 518     case 0x0000 ... 0x01ff:
 519     case 0x8000 ... 0x800f:
 520         if (s->cycle) {
 521             s->cycle = 0;
 522
 523             if (value == 0x0000) {
 524                 SETADDR(ONEN_BUF_BLOCK, ONEN_BUF_PAGE)
 525                 onenand_load_main(s, sec,
 526                                 1 << (PAGE_SHIFT - 9), s->data[0][0]);
 527                 s->addr[ONEN_BUF_PAGE] += 4;
 528                 s->addr[ONEN_BUF_PAGE] &= 0xff;
 529             }
 530             break;
 531         }
 532
 533         switch (value) {
 534         case 0x00f0:    /* Reset OneNAND */
 535             onenand_reset(s, 0);
 536             break;
 537
 538         case 0x00e0:    /* Load Data into Buffer */
 539             s->cycle = 1;
 540             break;
 541
 542         case 0x0090:    /* Read Identification Data */
 543             memset(s->boot[0], 0, 3 << s->shift);
 544             s->boot[0][0 << s->shift] = (s->id >> 16) & 0xff;
 545             s->boot[0][1 << s->shift] = (s->id >>  8) & 0xff;
 546             s->boot[0][2 << s->shift] = s->wpstatus & 0xff;
 547             break;
 548
 549         default:
 550             fprintf(stderr, "%s: unknown OneNAND boot command %x\n",
 551                             __FUNCTION__, value);
 552         }
 553         break;
 554
 555     case 0xf100 ... 0xf107:     /* Start addresses */
 556         s->addr[offset - 0xf100] = value;
 557         break;
 558
 559     case 0xf200:        /* Start buffer */
 560         s->bufaddr = (value >> 8) & 0xf;
 561         if (PAGE_SHIFT == 11)
 562             s->count = (value & 3) ?: 4;
 563         else if (PAGE_SHIFT == 10)
 564             s->count = (value & 1) ?: 2;
 565         break;
 566
 567     case 0xf220:        /* Command */
 568         if (s->intstatus & (1 << 15))
 569             break;
 570         s->command = value;
 571         onenand_command(s, s->command);
 572         break;
 573     case 0xf221:        /* System Configuration 1 */
 574         s->config[0] = value;
 575         onenand_intr_update(s);
 576         qemu_set_irq(s->rdy, (s->config[0] >> 7) & 1);
 577         break;
 578     case 0xf222:        /* System Configuration 2 */
 579         s->config[1] = value;
 580         break;
 581
 582     case 0xf241:        /* Interrupt */
 583         s->intstatus &= value;
 584         if ((1 << 15) & ~s->intstatus)
 585             s->status &= ~(ONEN_ERR_CMD | ONEN_ERR_ERASE |
 586                             ONEN_ERR_PROG | ONEN_ERR_LOAD);
 587         onenand_intr_update(s);
 588         break;
 589     case 0xf24c:        /* Unlock Start Block Address */
 590         s->unladdr[0] = value & (s->blocks - 1);
 591         /* For some reason we have to set the end address to by default
 592          * be same as start because the software forgets to write anything
 593          * in there.  */
 594         s->unladdr[1] = value & (s->blocks - 1);
 595         break;
 596     case 0xf24d:        /* Unlock End Block Address */
 597         s->unladdr[1] = value & (s->blocks - 1);
 598         break;
 599
 600     default:
 601         fprintf(stderr, "%s: unknown OneNAND register %x\n",
 602                         __FUNCTION__, offset);
 603     }
 604 }
 605
 606 static CPUReadMemoryFunc * const onenand_readfn[] = {
 607     onenand_read,       /* TODO */
 608     onenand_read,
 609     onenand_read,
 610 };
 611
 612 static CPUWriteMemoryFunc * const onenand_writefn[] = {
 613     onenand_write,      /* TODO */
 614     onenand_write,
 615     onenand_write,
 616 };
 617
 618 void *onenand_init(uint32_t id, int regshift, qemu_irq irq)
 619 {
 620     OneNANDState *s = (OneNANDState *) qemu_mallocz(sizeof(*s));
 621     DriveInfo *dinfo = drive_get(IF_MTD, 0, 0);
 622     uint32_t size = 1 << (24 + ((id >> 12) & 7));
 623     void *ram;
 624
 625     s->shift = regshift;
 626     s->intr = irq;
 627     s->rdy = NULL;
 628     s->id = id;
 629     s->blocks = size >> BLOCK_SHIFT;
 630     s->secs = size >> 9;
 631     s->blockwp = qemu_malloc(s->blocks);
 632     s->density_mask = (id & (1 << 11)) ? (1 << (6 + ((id >> 12) & 7))) : 0;
 633     s->iomemtype = cpu_register_io_memory(onenand_readfn,
 634                     onenand_writefn, s, DEVICE_NATIVE_ENDIAN);
 635     if (!dinfo)
 636         s->image = memset(qemu_malloc(size + (size >> 5)),
 637                         0xff, size + (size >> 5));
 638     else
 639         s->bdrv = dinfo->bdrv;
 640     s->otp = memset(qemu_malloc((64 + 2) << PAGE_SHIFT),
 641                     0xff, (64 + 2) << PAGE_SHIFT);
 642     s->ram = qemu_ram_alloc(NULL, "onenand.ram", 0xc000 << s->shift);
 643     ram = qemu_get_ram_ptr(s->ram);
 644     s->boot[0] = ram + (0x0000 << s->shift);
 645     s->boot[1] = ram + (0x8000 << s->shift);
 646     s->data[0][0] = ram + ((0x0200 + (0 << (PAGE_SHIFT - 1))) << s->shift);
 647     s->data[0][1] = ram + ((0x8010 + (0 << (PAGE_SHIFT - 6))) << s->shift);
 648     s->data[1][0] = ram + ((0x0200 + (1 << (PAGE_SHIFT - 1))) << s->shift);
 649     s->data[1][1] = ram + ((0x8010 + (1 << (PAGE_SHIFT - 6))) << s->shift);
 650
 651     onenand_reset(s, 1);
 652
 653     return s;
 654 }
 655
 656 void *onenand_raw_otp(void *opaque)
 657 {
 658     OneNANDState *s = (OneNANDState *) opaque;
 659
 660     return s->otp;
 661 }