]> git.proxmox.com Git - qemu.git/blob - hw/pci-host/versatile.c
qom: pass file/line/function to asserting casts
[qemu.git] / hw / pci-host / versatile.c
1 /*
2 * ARM Versatile/PB PCI host controller
3 *
4 * Copyright (c) 2006-2009 CodeSourcery.
5 * Written by Paul Brook
6 *
7 * This code is licensed under the LGPL.
8 */
9
10 #include "hw/sysbus.h"
11 #include "hw/pci/pci.h"
12 #include "hw/pci/pci_bus.h"
13 #include "hw/pci/pci_host.h"
14 #include "exec/address-spaces.h"
15
16 /* Old and buggy versions of QEMU used the wrong mapping from
17 * PCI IRQs to system interrupt lines. Unfortunately the Linux
18 * kernel also had the corresponding bug in setting up interrupts
19 * (so older kernels work on QEMU and not on real hardware).
20 * We automatically detect these broken kernels and flip back
21 * to the broken irq mapping by spotting guest writes to the
22 * PCI_INTERRUPT_LINE register to see where the guest thinks
23 * interrupts are going to be routed. So we start in state
24 * ASSUME_OK on reset, and transition to either BROKEN or
25 * FORCE_OK at the first write to an INTERRUPT_LINE register for
26 * a slot where broken and correct interrupt mapping would differ.
27 * Once in either BROKEN or FORCE_OK we never transition again;
28 * this allows a newer kernel to use the INTERRUPT_LINE
29 * registers arbitrarily once it has indicated that it isn't
30 * broken in its init code somewhere.
31 */
32 enum {
33 PCI_VPB_IRQMAP_ASSUME_OK,
34 PCI_VPB_IRQMAP_BROKEN,
35 PCI_VPB_IRQMAP_FORCE_OK,
36 };
37
38 typedef struct {
39 PCIHostState parent_obj;
40
41 qemu_irq irq[4];
42 MemoryRegion controlregs;
43 MemoryRegion mem_config;
44 MemoryRegion mem_config2;
45 /* Containers representing the PCI address spaces */
46 MemoryRegion pci_io_space;
47 MemoryRegion pci_mem_space;
48 /* Alias regions into PCI address spaces which we expose as sysbus regions.
49 * The offsets into pci_mem_space are controlled by the imap registers.
50 */
51 MemoryRegion pci_io_window;
52 MemoryRegion pci_mem_window[3];
53 PCIBus pci_bus;
54 PCIDevice pci_dev;
55
56 /* Constant for life of device: */
57 int realview;
58 uint32_t mem_win_size[3];
59
60 /* Variable state: */
61 uint32_t imap[3];
62 uint32_t smap[3];
63 uint32_t selfid;
64 uint32_t flags;
65 uint8_t irq_mapping;
66 } PCIVPBState;
67
68 static void pci_vpb_update_window(PCIVPBState *s, int i)
69 {
70 /* Adjust the offset of the alias region we use for
71 * the memory window i to account for a change in the
72 * value of the corresponding IMAP register.
73 * Note that the semantics of the IMAP register differ
74 * for realview and versatile variants of the controller.
75 */
76 hwaddr offset;
77 if (s->realview) {
78 /* Top bits of register (masked according to window size) provide
79 * top bits of PCI address.
80 */
81 offset = s->imap[i] & ~(s->mem_win_size[i] - 1);
82 } else {
83 /* Bottom 4 bits of register provide top 4 bits of PCI address */
84 offset = s->imap[i] << 28;
85 }
86 memory_region_set_alias_offset(&s->pci_mem_window[i], offset);
87 }
88
89 static void pci_vpb_update_all_windows(PCIVPBState *s)
90 {
91 /* Update all alias windows based on the current register state */
92 int i;
93
94 for (i = 0; i < 3; i++) {
95 pci_vpb_update_window(s, i);
96 }
97 }
98
99 static int pci_vpb_post_load(void *opaque, int version_id)
100 {
101 PCIVPBState *s = opaque;
102 pci_vpb_update_all_windows(s);
103 return 0;
104 }
105
106 static const VMStateDescription pci_vpb_vmstate = {
107 .name = "versatile-pci",
108 .version_id = 1,
109 .minimum_version_id = 1,
110 .post_load = pci_vpb_post_load,
111 .fields = (VMStateField[]) {
112 VMSTATE_UINT32_ARRAY(imap, PCIVPBState, 3),
113 VMSTATE_UINT32_ARRAY(smap, PCIVPBState, 3),
114 VMSTATE_UINT32(selfid, PCIVPBState),
115 VMSTATE_UINT32(flags, PCIVPBState),
116 VMSTATE_UINT8(irq_mapping, PCIVPBState),
117 VMSTATE_END_OF_LIST()
118 }
119 };
120
121 #define TYPE_VERSATILE_PCI "versatile_pci"
122 #define PCI_VPB(obj) \
123 OBJECT_CHECK(PCIVPBState, (obj), TYPE_VERSATILE_PCI)
124
125 #define TYPE_VERSATILE_PCI_HOST "versatile_pci_host"
126 #define PCI_VPB_HOST(obj) \
127 OBJECT_CHECK(PCIDevice, (obj), TYPE_VERSATILE_PCIHOST)
128
129 typedef enum {
130 PCI_IMAP0 = 0x0,
131 PCI_IMAP1 = 0x4,
132 PCI_IMAP2 = 0x8,
133 PCI_SELFID = 0xc,
134 PCI_FLAGS = 0x10,
135 PCI_SMAP0 = 0x14,
136 PCI_SMAP1 = 0x18,
137 PCI_SMAP2 = 0x1c,
138 } PCIVPBControlRegs;
139
140 static void pci_vpb_reg_write(void *opaque, hwaddr addr,
141 uint64_t val, unsigned size)
142 {
143 PCIVPBState *s = opaque;
144
145 switch (addr) {
146 case PCI_IMAP0:
147 case PCI_IMAP1:
148 case PCI_IMAP2:
149 {
150 int win = (addr - PCI_IMAP0) >> 2;
151 s->imap[win] = val;
152 pci_vpb_update_window(s, win);
153 break;
154 }
155 case PCI_SELFID:
156 s->selfid = val;
157 break;
158 case PCI_FLAGS:
159 s->flags = val;
160 break;
161 case PCI_SMAP0:
162 case PCI_SMAP1:
163 case PCI_SMAP2:
164 {
165 int win = (addr - PCI_SMAP0) >> 2;
166 s->smap[win] = val;
167 break;
168 }
169 default:
170 qemu_log_mask(LOG_GUEST_ERROR,
171 "pci_vpb_reg_write: Bad offset %x\n", (int)addr);
172 break;
173 }
174 }
175
176 static uint64_t pci_vpb_reg_read(void *opaque, hwaddr addr,
177 unsigned size)
178 {
179 PCIVPBState *s = opaque;
180
181 switch (addr) {
182 case PCI_IMAP0:
183 case PCI_IMAP1:
184 case PCI_IMAP2:
185 {
186 int win = (addr - PCI_IMAP0) >> 2;
187 return s->imap[win];
188 }
189 case PCI_SELFID:
190 return s->selfid;
191 case PCI_FLAGS:
192 return s->flags;
193 case PCI_SMAP0:
194 case PCI_SMAP1:
195 case PCI_SMAP2:
196 {
197 int win = (addr - PCI_SMAP0) >> 2;
198 return s->smap[win];
199 }
200 default:
201 qemu_log_mask(LOG_GUEST_ERROR,
202 "pci_vpb_reg_read: Bad offset %x\n", (int)addr);
203 return 0;
204 }
205 }
206
207 static const MemoryRegionOps pci_vpb_reg_ops = {
208 .read = pci_vpb_reg_read,
209 .write = pci_vpb_reg_write,
210 .endianness = DEVICE_NATIVE_ENDIAN,
211 .valid = {
212 .min_access_size = 4,
213 .max_access_size = 4,
214 },
215 };
216
217 static void pci_vpb_config_write(void *opaque, hwaddr addr,
218 uint64_t val, unsigned size)
219 {
220 PCIVPBState *s = opaque;
221 if (!s->realview && (addr & 0xff) == PCI_INTERRUPT_LINE
222 && s->irq_mapping == PCI_VPB_IRQMAP_ASSUME_OK) {
223 uint8_t devfn = addr >> 8;
224 if ((PCI_SLOT(devfn) % PCI_NUM_PINS) != 2) {
225 if (val == 27) {
226 s->irq_mapping = PCI_VPB_IRQMAP_BROKEN;
227 } else {
228 s->irq_mapping = PCI_VPB_IRQMAP_FORCE_OK;
229 }
230 }
231 }
232 pci_data_write(&s->pci_bus, addr, val, size);
233 }
234
235 static uint64_t pci_vpb_config_read(void *opaque, hwaddr addr,
236 unsigned size)
237 {
238 PCIVPBState *s = opaque;
239 uint32_t val;
240 val = pci_data_read(&s->pci_bus, addr, size);
241 return val;
242 }
243
244 static const MemoryRegionOps pci_vpb_config_ops = {
245 .read = pci_vpb_config_read,
246 .write = pci_vpb_config_write,
247 .endianness = DEVICE_NATIVE_ENDIAN,
248 };
249
250 static int pci_vpb_map_irq(PCIDevice *d, int irq_num)
251 {
252 PCIVPBState *s = container_of(d->bus, PCIVPBState, pci_bus);
253
254 if (s->irq_mapping == PCI_VPB_IRQMAP_BROKEN) {
255 /* Legacy broken IRQ mapping for compatibility with old and
256 * buggy Linux guests
257 */
258 return irq_num;
259 }
260
261 /* Slot to IRQ mapping for RealView Platform Baseboard 926 backplane
262 * name slot IntA IntB IntC IntD
263 * A 31 IRQ28 IRQ29 IRQ30 IRQ27
264 * B 30 IRQ27 IRQ28 IRQ29 IRQ30
265 * C 29 IRQ30 IRQ27 IRQ28 IRQ29
266 * Slot C is for the host bridge; A and B the peripherals.
267 * Our output irqs 0..3 correspond to the baseboard's 27..30.
268 *
269 * This mapping function takes account of an oddity in the PB926
270 * board wiring, where the FPGA's P_nINTA input is connected to
271 * the INTB connection on the board PCI edge connector, P_nINTB
272 * is connected to INTC, and so on, so everything is one number
273 * further round from where you might expect.
274 */
275 return pci_swizzle_map_irq_fn(d, irq_num + 2);
276 }
277
278 static int pci_vpb_rv_map_irq(PCIDevice *d, int irq_num)
279 {
280 /* Slot to IRQ mapping for RealView EB and PB1176 backplane
281 * name slot IntA IntB IntC IntD
282 * A 31 IRQ50 IRQ51 IRQ48 IRQ49
283 * B 30 IRQ49 IRQ50 IRQ51 IRQ48
284 * C 29 IRQ48 IRQ49 IRQ50 IRQ51
285 * Slot C is for the host bridge; A and B the peripherals.
286 * Our output irqs 0..3 correspond to the baseboard's 48..51.
287 *
288 * The PB1176 and EB boards don't have the PB926 wiring oddity
289 * described above; P_nINTA connects to INTA, P_nINTB to INTB
290 * and so on, which is why this mapping function is different.
291 */
292 return pci_swizzle_map_irq_fn(d, irq_num + 3);
293 }
294
295 static void pci_vpb_set_irq(void *opaque, int irq_num, int level)
296 {
297 qemu_irq *pic = opaque;
298
299 qemu_set_irq(pic[irq_num], level);
300 }
301
302 static void pci_vpb_reset(DeviceState *d)
303 {
304 PCIVPBState *s = PCI_VPB(d);
305
306 s->imap[0] = 0;
307 s->imap[1] = 0;
308 s->imap[2] = 0;
309 s->smap[0] = 0;
310 s->smap[1] = 0;
311 s->smap[2] = 0;
312 s->selfid = 0;
313 s->flags = 0;
314 s->irq_mapping = PCI_VPB_IRQMAP_ASSUME_OK;
315
316 pci_vpb_update_all_windows(s);
317 }
318
319 static void pci_vpb_init(Object *obj)
320 {
321 PCIHostState *h = PCI_HOST_BRIDGE(obj);
322 PCIVPBState *s = PCI_VPB(obj);
323
324 memory_region_init(&s->pci_io_space, "pci_io", 1ULL << 32);
325 memory_region_init(&s->pci_mem_space, "pci_mem", 1ULL << 32);
326
327 pci_bus_new_inplace(&s->pci_bus, DEVICE(obj), "pci",
328 &s->pci_mem_space, &s->pci_io_space,
329 PCI_DEVFN(11, 0), TYPE_PCI_BUS);
330 h->bus = &s->pci_bus;
331
332 object_initialize(&s->pci_dev, TYPE_VERSATILE_PCI_HOST);
333 qdev_set_parent_bus(DEVICE(&s->pci_dev), BUS(&s->pci_bus));
334 object_property_set_int(OBJECT(&s->pci_dev), PCI_DEVFN(29, 0), "addr",
335 NULL);
336
337 /* Window sizes for VersatilePB; realview_pci's init will override */
338 s->mem_win_size[0] = 0x0c000000;
339 s->mem_win_size[1] = 0x10000000;
340 s->mem_win_size[2] = 0x10000000;
341 }
342
343 static void pci_vpb_realize(DeviceState *dev, Error **errp)
344 {
345 PCIVPBState *s = PCI_VPB(dev);
346 SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
347 pci_map_irq_fn mapfn;
348 int i;
349
350 for (i = 0; i < 4; i++) {
351 sysbus_init_irq(sbd, &s->irq[i]);
352 }
353
354 if (s->realview) {
355 mapfn = pci_vpb_rv_map_irq;
356 } else {
357 mapfn = pci_vpb_map_irq;
358 }
359
360 pci_bus_irqs(&s->pci_bus, pci_vpb_set_irq, mapfn, s->irq, 4);
361
362 /* Our memory regions are:
363 * 0 : our control registers
364 * 1 : PCI self config window
365 * 2 : PCI config window
366 * 3 : PCI IO window
367 * 4..6 : PCI memory windows
368 */
369 memory_region_init_io(&s->controlregs, &pci_vpb_reg_ops, s, "pci-vpb-regs",
370 0x1000);
371 sysbus_init_mmio(sbd, &s->controlregs);
372 memory_region_init_io(&s->mem_config, &pci_vpb_config_ops, s,
373 "pci-vpb-selfconfig", 0x1000000);
374 sysbus_init_mmio(sbd, &s->mem_config);
375 memory_region_init_io(&s->mem_config2, &pci_vpb_config_ops, s,
376 "pci-vpb-config", 0x1000000);
377 sysbus_init_mmio(sbd, &s->mem_config2);
378
379 /* The window into I/O space is always into a fixed base address;
380 * its size is the same for both realview and versatile.
381 */
382 memory_region_init_alias(&s->pci_io_window, "pci-vbp-io-window",
383 &s->pci_io_space, 0, 0x100000);
384
385 sysbus_init_mmio(sbd, &s->pci_io_space);
386
387 /* Create the alias regions corresponding to our three windows onto
388 * PCI memory space. The sizes vary from board to board; the base
389 * offsets are guest controllable via the IMAP registers.
390 */
391 for (i = 0; i < 3; i++) {
392 memory_region_init_alias(&s->pci_mem_window[i], "pci-vbp-window",
393 &s->pci_mem_space, 0, s->mem_win_size[i]);
394 sysbus_init_mmio(sbd, &s->pci_mem_window[i]);
395 }
396
397 /* TODO Remove once realize propagates to child devices. */
398 object_property_set_bool(OBJECT(&s->pci_dev), true, "realized", errp);
399 }
400
401 static int versatile_pci_host_init(PCIDevice *d)
402 {
403 pci_set_word(d->config + PCI_STATUS,
404 PCI_STATUS_66MHZ | PCI_STATUS_DEVSEL_MEDIUM);
405 pci_set_byte(d->config + PCI_LATENCY_TIMER, 0x10);
406 return 0;
407 }
408
409 static void versatile_pci_host_class_init(ObjectClass *klass, void *data)
410 {
411 PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
412
413 k->init = versatile_pci_host_init;
414 k->vendor_id = PCI_VENDOR_ID_XILINX;
415 k->device_id = PCI_DEVICE_ID_XILINX_XC2VP30;
416 k->class_id = PCI_CLASS_PROCESSOR_CO;
417 }
418
419 static const TypeInfo versatile_pci_host_info = {
420 .name = TYPE_VERSATILE_PCI_HOST,
421 .parent = TYPE_PCI_DEVICE,
422 .instance_size = sizeof(PCIDevice),
423 .class_init = versatile_pci_host_class_init,
424 };
425
426 static void pci_vpb_class_init(ObjectClass *klass, void *data)
427 {
428 DeviceClass *dc = DEVICE_CLASS(klass);
429
430 dc->realize = pci_vpb_realize;
431 dc->reset = pci_vpb_reset;
432 dc->vmsd = &pci_vpb_vmstate;
433 }
434
435 static const TypeInfo pci_vpb_info = {
436 .name = TYPE_VERSATILE_PCI,
437 .parent = TYPE_PCI_HOST_BRIDGE,
438 .instance_size = sizeof(PCIVPBState),
439 .instance_init = pci_vpb_init,
440 .class_init = pci_vpb_class_init,
441 };
442
443 static void pci_realview_init(Object *obj)
444 {
445 PCIVPBState *s = PCI_VPB(obj);
446
447 s->realview = 1;
448 /* The PCI window sizes are different on Realview boards */
449 s->mem_win_size[0] = 0x01000000;
450 s->mem_win_size[1] = 0x04000000;
451 s->mem_win_size[2] = 0x08000000;
452 }
453
454 static const TypeInfo pci_realview_info = {
455 .name = "realview_pci",
456 .parent = TYPE_VERSATILE_PCI,
457 .instance_init = pci_realview_init,
458 };
459
460 static void versatile_pci_register_types(void)
461 {
462 type_register_static(&pci_vpb_info);
463 type_register_static(&pci_realview_info);
464 type_register_static(&versatile_pci_host_info);
465 }
466
467 type_init(versatile_pci_register_types)