]> git.proxmox.com Git - qemu.git/blob - hw/pcie.c
user: Restore debug usage message for '-d ?' in user mode emulation
[qemu.git] / hw / pcie.c
1 /*
2 * pcie.c
3 *
4 * Copyright (c) 2010 Isaku Yamahata <yamahata at valinux co jp>
5 * VA Linux Systems Japan K.K.
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
11 *
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License along
18 * with this program; if not, see <http://www.gnu.org/licenses/>.
19 */
20
21 #include "qemu-common.h"
22 #include "pci_bridge.h"
23 #include "pcie.h"
24 #include "msix.h"
25 #include "msi.h"
26 #include "pci_internals.h"
27 #include "pcie_regs.h"
28 #include "range.h"
29
30 //#define DEBUG_PCIE
31 #ifdef DEBUG_PCIE
32 # define PCIE_DPRINTF(fmt, ...) \
33 fprintf(stderr, "%s:%d " fmt, __func__, __LINE__, ## __VA_ARGS__)
34 #else
35 # define PCIE_DPRINTF(fmt, ...) do {} while (0)
36 #endif
37 #define PCIE_DEV_PRINTF(dev, fmt, ...) \
38 PCIE_DPRINTF("%s:%x "fmt, (dev)->name, (dev)->devfn, ## __VA_ARGS__)
39
40
41 /***************************************************************************
42 * pci express capability helper functions
43 */
44 int pcie_cap_init(PCIDevice *dev, uint8_t offset, uint8_t type, uint8_t port)
45 {
46 int pos;
47 uint8_t *exp_cap;
48
49 assert(pci_is_express(dev));
50
51 pos = pci_add_capability(dev, PCI_CAP_ID_EXP, offset,
52 PCI_EXP_VER2_SIZEOF);
53 if (pos < 0) {
54 return pos;
55 }
56 dev->exp.exp_cap = pos;
57 exp_cap = dev->config + pos;
58
59 /* capability register
60 interrupt message number defaults to 0 */
61 pci_set_word(exp_cap + PCI_EXP_FLAGS,
62 ((type << PCI_EXP_FLAGS_TYPE_SHIFT) & PCI_EXP_FLAGS_TYPE) |
63 PCI_EXP_FLAGS_VER2);
64
65 /* device capability register
66 * table 7-12:
67 * roll based error reporting bit must be set by all
68 * Functions conforming to the ECN, PCI Express Base
69 * Specification, Revision 1.1., or subsequent PCI Express Base
70 * Specification revisions.
71 */
72 pci_set_long(exp_cap + PCI_EXP_DEVCAP, PCI_EXP_DEVCAP_RBER);
73
74 pci_set_long(exp_cap + PCI_EXP_LNKCAP,
75 (port << PCI_EXP_LNKCAP_PN_SHIFT) |
76 PCI_EXP_LNKCAP_ASPMS_0S |
77 PCI_EXP_LNK_MLW_1 |
78 PCI_EXP_LNK_LS_25);
79
80 pci_set_word(exp_cap + PCI_EXP_LNKSTA,
81 PCI_EXP_LNK_MLW_1 | PCI_EXP_LNK_LS_25);
82
83 pci_set_long(exp_cap + PCI_EXP_DEVCAP2,
84 PCI_EXP_DEVCAP2_EFF | PCI_EXP_DEVCAP2_EETLPP);
85
86 pci_set_word(dev->wmask + pos, PCI_EXP_DEVCTL2_EETLPPB);
87 return pos;
88 }
89
90 void pcie_cap_exit(PCIDevice *dev)
91 {
92 pci_del_capability(dev, PCI_CAP_ID_EXP, PCI_EXP_VER2_SIZEOF);
93 }
94
95 uint8_t pcie_cap_get_type(const PCIDevice *dev)
96 {
97 uint32_t pos = dev->exp.exp_cap;
98 assert(pos > 0);
99 return (pci_get_word(dev->config + pos + PCI_EXP_FLAGS) &
100 PCI_EXP_FLAGS_TYPE) >> PCI_EXP_FLAGS_TYPE_SHIFT;
101 }
102
103 /* MSI/MSI-X */
104 /* pci express interrupt message number */
105 /* 7.8.2 PCI Express Capabilities Register: Interrupt Message Number */
106 void pcie_cap_flags_set_vector(PCIDevice *dev, uint8_t vector)
107 {
108 uint8_t *exp_cap = dev->config + dev->exp.exp_cap;
109 assert(vector < 32);
110 pci_word_test_and_clear_mask(exp_cap + PCI_EXP_FLAGS, PCI_EXP_FLAGS_IRQ);
111 pci_word_test_and_set_mask(exp_cap + PCI_EXP_FLAGS,
112 vector << PCI_EXP_FLAGS_IRQ_SHIFT);
113 }
114
115 uint8_t pcie_cap_flags_get_vector(PCIDevice *dev)
116 {
117 return (pci_get_word(dev->config + dev->exp.exp_cap + PCI_EXP_FLAGS) &
118 PCI_EXP_FLAGS_IRQ) >> PCI_EXP_FLAGS_IRQ_SHIFT;
119 }
120
121 void pcie_cap_deverr_init(PCIDevice *dev)
122 {
123 uint32_t pos = dev->exp.exp_cap;
124 pci_long_test_and_set_mask(dev->config + pos + PCI_EXP_DEVCAP,
125 PCI_EXP_DEVCAP_RBER);
126 pci_long_test_and_set_mask(dev->wmask + pos + PCI_EXP_DEVCTL,
127 PCI_EXP_DEVCTL_CERE | PCI_EXP_DEVCTL_NFERE |
128 PCI_EXP_DEVCTL_FERE | PCI_EXP_DEVCTL_URRE);
129 pci_long_test_and_set_mask(dev->w1cmask + pos + PCI_EXP_DEVSTA,
130 PCI_EXP_DEVSTA_CED | PCI_EXP_DEVSTA_NFED |
131 PCI_EXP_DEVSTA_URD | PCI_EXP_DEVSTA_URD);
132 }
133
134 void pcie_cap_deverr_reset(PCIDevice *dev)
135 {
136 uint8_t *devctl = dev->config + dev->exp.exp_cap + PCI_EXP_DEVCTL;
137 pci_long_test_and_clear_mask(devctl,
138 PCI_EXP_DEVCTL_CERE | PCI_EXP_DEVCTL_NFERE |
139 PCI_EXP_DEVCTL_FERE | PCI_EXP_DEVCTL_URRE);
140 }
141
142 static void hotplug_event_update_event_status(PCIDevice *dev)
143 {
144 uint32_t pos = dev->exp.exp_cap;
145 uint8_t *exp_cap = dev->config + pos;
146 uint16_t sltctl = pci_get_word(exp_cap + PCI_EXP_SLTCTL);
147 uint16_t sltsta = pci_get_word(exp_cap + PCI_EXP_SLTSTA);
148
149 dev->exp.hpev_notified = (sltctl & PCI_EXP_SLTCTL_HPIE) &&
150 (sltsta & sltctl & PCI_EXP_HP_EV_SUPPORTED);
151 }
152
153 static void hotplug_event_notify(PCIDevice *dev)
154 {
155 bool prev = dev->exp.hpev_notified;
156
157 hotplug_event_update_event_status(dev);
158
159 if (prev == dev->exp.hpev_notified) {
160 return;
161 }
162
163 /* Note: the logic above does not take into account whether interrupts
164 * are masked. The result is that interrupt will be sent when it is
165 * subsequently unmasked. This appears to be legal: Section 6.7.3.4:
166 * The Port may optionally send an MSI when there are hot-plug events that
167 * occur while interrupt generation is disabled, and interrupt generation is
168 * subsequently enabled. */
169 if (msix_enabled(dev)) {
170 msix_notify(dev, pcie_cap_flags_get_vector(dev));
171 } else if (msi_enabled(dev)) {
172 msi_notify(dev, pcie_cap_flags_get_vector(dev));
173 } else {
174 qemu_set_irq(dev->irq[dev->exp.hpev_intx], dev->exp.hpev_notified);
175 }
176 }
177
178 /*
179 * A PCI Express Hot-Plug Event has occurred, so update slot status register
180 * and notify OS of the event if necessary.
181 *
182 * 6.7.3 PCI Express Hot-Plug Events
183 * 6.7.3.4 Software Notification of Hot-Plug Events
184 */
185 static void pcie_cap_slot_event(PCIDevice *dev, PCIExpressHotPlugEvent event)
186 {
187 /* Minor optimization: if nothing changed - no event is needed. */
188 if (pci_word_test_and_set_mask(dev->config + dev->exp.exp_cap +
189 PCI_EXP_SLTSTA, event)) {
190 return;
191 }
192 hotplug_event_notify(dev);
193 }
194
195 static int pcie_cap_slot_hotplug(DeviceState *qdev,
196 PCIDevice *pci_dev, PCIHotplugState state)
197 {
198 PCIDevice *d = DO_UPCAST(PCIDevice, qdev, qdev);
199 uint8_t *exp_cap = d->config + d->exp.exp_cap;
200 uint16_t sltsta = pci_get_word(exp_cap + PCI_EXP_SLTSTA);
201
202 /* Don't send event when device is enabled during qemu machine creation:
203 * it is present on boot, no hotplug event is necessary. We do send an
204 * event when the device is disabled later. */
205 if (state == PCI_COLDPLUG_ENABLED) {
206 pci_word_test_and_set_mask(exp_cap + PCI_EXP_SLTSTA,
207 PCI_EXP_SLTSTA_PDS);
208 return 0;
209 }
210
211 PCIE_DEV_PRINTF(pci_dev, "hotplug state: %d\n", state);
212 if (sltsta & PCI_EXP_SLTSTA_EIS) {
213 /* the slot is electromechanically locked.
214 * This error is propagated up to qdev and then to HMP/QMP.
215 */
216 return -EBUSY;
217 }
218
219 /* TODO: multifunction hot-plug.
220 * Right now, only a device of function = 0 is allowed to be
221 * hot plugged/unplugged.
222 */
223 assert(PCI_FUNC(pci_dev->devfn) == 0);
224
225 if (state == PCI_HOTPLUG_ENABLED) {
226 pci_word_test_and_set_mask(exp_cap + PCI_EXP_SLTSTA,
227 PCI_EXP_SLTSTA_PDS);
228 pcie_cap_slot_event(d, PCI_EXP_HP_EV_PDC);
229 } else {
230 qdev_free(&pci_dev->qdev);
231 pci_word_test_and_clear_mask(exp_cap + PCI_EXP_SLTSTA,
232 PCI_EXP_SLTSTA_PDS);
233 pcie_cap_slot_event(d, PCI_EXP_HP_EV_PDC);
234 }
235 return 0;
236 }
237
238 /* pci express slot for pci express root/downstream port
239 PCI express capability slot registers */
240 void pcie_cap_slot_init(PCIDevice *dev, uint16_t slot)
241 {
242 uint32_t pos = dev->exp.exp_cap;
243
244 pci_word_test_and_set_mask(dev->config + pos + PCI_EXP_FLAGS,
245 PCI_EXP_FLAGS_SLOT);
246
247 pci_long_test_and_clear_mask(dev->config + pos + PCI_EXP_SLTCAP,
248 ~PCI_EXP_SLTCAP_PSN);
249 pci_long_test_and_set_mask(dev->config + pos + PCI_EXP_SLTCAP,
250 (slot << PCI_EXP_SLTCAP_PSN_SHIFT) |
251 PCI_EXP_SLTCAP_EIP |
252 PCI_EXP_SLTCAP_HPS |
253 PCI_EXP_SLTCAP_HPC |
254 PCI_EXP_SLTCAP_PIP |
255 PCI_EXP_SLTCAP_AIP |
256 PCI_EXP_SLTCAP_ABP);
257
258 pci_word_test_and_clear_mask(dev->config + pos + PCI_EXP_SLTCTL,
259 PCI_EXP_SLTCTL_PIC |
260 PCI_EXP_SLTCTL_AIC);
261 pci_word_test_and_set_mask(dev->config + pos + PCI_EXP_SLTCTL,
262 PCI_EXP_SLTCTL_PIC_OFF |
263 PCI_EXP_SLTCTL_AIC_OFF);
264 pci_word_test_and_set_mask(dev->wmask + pos + PCI_EXP_SLTCTL,
265 PCI_EXP_SLTCTL_PIC |
266 PCI_EXP_SLTCTL_AIC |
267 PCI_EXP_SLTCTL_HPIE |
268 PCI_EXP_SLTCTL_CCIE |
269 PCI_EXP_SLTCTL_PDCE |
270 PCI_EXP_SLTCTL_ABPE);
271 /* Although reading PCI_EXP_SLTCTL_EIC returns always 0,
272 * make the bit writable here in order to detect 1b is written.
273 * pcie_cap_slot_write_config() test-and-clear the bit, so
274 * this bit always returns 0 to the guest.
275 */
276 pci_word_test_and_set_mask(dev->wmask + pos + PCI_EXP_SLTCTL,
277 PCI_EXP_SLTCTL_EIC);
278
279 pci_word_test_and_set_mask(dev->w1cmask + pos + PCI_EXP_SLTSTA,
280 PCI_EXP_HP_EV_SUPPORTED);
281
282 dev->exp.hpev_notified = false;
283
284 pci_bus_hotplug(pci_bridge_get_sec_bus(DO_UPCAST(PCIBridge, dev, dev)),
285 pcie_cap_slot_hotplug, &dev->qdev);
286 }
287
288 void pcie_cap_slot_reset(PCIDevice *dev)
289 {
290 uint8_t *exp_cap = dev->config + dev->exp.exp_cap;
291
292 PCIE_DEV_PRINTF(dev, "reset\n");
293
294 pci_word_test_and_clear_mask(exp_cap + PCI_EXP_SLTCTL,
295 PCI_EXP_SLTCTL_EIC |
296 PCI_EXP_SLTCTL_PIC |
297 PCI_EXP_SLTCTL_AIC |
298 PCI_EXP_SLTCTL_HPIE |
299 PCI_EXP_SLTCTL_CCIE |
300 PCI_EXP_SLTCTL_PDCE |
301 PCI_EXP_SLTCTL_ABPE);
302 pci_word_test_and_set_mask(exp_cap + PCI_EXP_SLTCTL,
303 PCI_EXP_SLTCTL_PIC_OFF |
304 PCI_EXP_SLTCTL_AIC_OFF);
305
306 pci_word_test_and_clear_mask(exp_cap + PCI_EXP_SLTSTA,
307 PCI_EXP_SLTSTA_EIS |/* on reset,
308 the lock is released */
309 PCI_EXP_SLTSTA_CC |
310 PCI_EXP_SLTSTA_PDC |
311 PCI_EXP_SLTSTA_ABP);
312
313 hotplug_event_update_event_status(dev);
314 }
315
316 void pcie_cap_slot_write_config(PCIDevice *dev,
317 uint32_t addr, uint32_t val, int len)
318 {
319 uint32_t pos = dev->exp.exp_cap;
320 uint8_t *exp_cap = dev->config + pos;
321 uint16_t sltsta = pci_get_word(exp_cap + PCI_EXP_SLTSTA);
322
323 if (!ranges_overlap(addr, len, pos + PCI_EXP_SLTCTL, 2)) {
324 return;
325 }
326
327 if (pci_word_test_and_clear_mask(exp_cap + PCI_EXP_SLTCTL,
328 PCI_EXP_SLTCTL_EIC)) {
329 sltsta ^= PCI_EXP_SLTSTA_EIS; /* toggle PCI_EXP_SLTSTA_EIS bit */
330 pci_set_word(exp_cap + PCI_EXP_SLTSTA, sltsta);
331 PCIE_DEV_PRINTF(dev, "PCI_EXP_SLTCTL_EIC: "
332 "sltsta -> 0x%02"PRIx16"\n",
333 sltsta);
334 }
335
336 hotplug_event_notify(dev);
337
338 /*
339 * 6.7.3.2 Command Completed Events
340 *
341 * Software issues a command to a hot-plug capable Downstream Port by
342 * issuing a write transaction that targets any portion of the Port’s Slot
343 * Control register. A single write to the Slot Control register is
344 * considered to be a single command, even if the write affects more than
345 * one field in the Slot Control register. In response to this transaction,
346 * the Port must carry out the requested actions and then set the
347 * associated status field for the command completed event. */
348
349 /* Real hardware might take a while to complete requested command because
350 * physical movement would be involved like locking the electromechanical
351 * lock. However in our case, command is completed instantaneously above,
352 * so send a command completion event right now.
353 */
354 pcie_cap_slot_event(dev, PCI_EXP_HP_EV_CCI);
355 }
356
357 int pcie_cap_slot_post_load(void *opaque, int version_id)
358 {
359 PCIDevice *dev = opaque;
360 hotplug_event_update_event_status(dev);
361 return 0;
362 }
363
364 void pcie_cap_slot_push_attention_button(PCIDevice *dev)
365 {
366 pcie_cap_slot_event(dev, PCI_EXP_HP_EV_ABP);
367 }
368
369 /* root control/capabilities/status. PME isn't emulated for now */
370 void pcie_cap_root_init(PCIDevice *dev)
371 {
372 pci_set_word(dev->wmask + dev->exp.exp_cap + PCI_EXP_RTCTL,
373 PCI_EXP_RTCTL_SECEE | PCI_EXP_RTCTL_SENFEE |
374 PCI_EXP_RTCTL_SEFEE);
375 }
376
377 void pcie_cap_root_reset(PCIDevice *dev)
378 {
379 pci_set_word(dev->config + dev->exp.exp_cap + PCI_EXP_RTCTL, 0);
380 }
381
382 /* function level reset(FLR) */
383 void pcie_cap_flr_init(PCIDevice *dev)
384 {
385 pci_long_test_and_set_mask(dev->config + dev->exp.exp_cap + PCI_EXP_DEVCAP,
386 PCI_EXP_DEVCAP_FLR);
387
388 /* Although reading BCR_FLR returns always 0,
389 * the bit is made writable here in order to detect the 1b is written
390 * pcie_cap_flr_write_config() test-and-clear the bit, so
391 * this bit always returns 0 to the guest.
392 */
393 pci_word_test_and_set_mask(dev->wmask + dev->exp.exp_cap + PCI_EXP_DEVCTL,
394 PCI_EXP_DEVCTL_BCR_FLR);
395 }
396
397 void pcie_cap_flr_write_config(PCIDevice *dev,
398 uint32_t addr, uint32_t val, int len)
399 {
400 uint8_t *devctl = dev->config + dev->exp.exp_cap + PCI_EXP_DEVCTL;
401 if (pci_get_word(devctl) & PCI_EXP_DEVCTL_BCR_FLR) {
402 /* Clear PCI_EXP_DEVCTL_BCR_FLR after invoking the reset handler
403 so the handler can detect FLR by looking at this bit. */
404 pci_device_reset(dev);
405 pci_word_test_and_clear_mask(devctl, PCI_EXP_DEVCTL_BCR_FLR);
406 }
407 }
408
409 /* Alternative Routing-ID Interpretation (ARI) */
410 /* ari forwarding support for down stream port */
411 void pcie_cap_ari_init(PCIDevice *dev)
412 {
413 uint32_t pos = dev->exp.exp_cap;
414 pci_long_test_and_set_mask(dev->config + pos + PCI_EXP_DEVCAP2,
415 PCI_EXP_DEVCAP2_ARI);
416 pci_long_test_and_set_mask(dev->wmask + pos + PCI_EXP_DEVCTL2,
417 PCI_EXP_DEVCTL2_ARI);
418 }
419
420 void pcie_cap_ari_reset(PCIDevice *dev)
421 {
422 uint8_t *devctl2 = dev->config + dev->exp.exp_cap + PCI_EXP_DEVCTL2;
423 pci_long_test_and_clear_mask(devctl2, PCI_EXP_DEVCTL2_ARI);
424 }
425
426 bool pcie_cap_is_ari_enabled(const PCIDevice *dev)
427 {
428 if (!pci_is_express(dev)) {
429 return false;
430 }
431 if (!dev->exp.exp_cap) {
432 return false;
433 }
434
435 return pci_get_long(dev->config + dev->exp.exp_cap + PCI_EXP_DEVCTL2) &
436 PCI_EXP_DEVCTL2_ARI;
437 }
438
439 /**************************************************************************
440 * pci express extended capability allocation functions
441 * uint16_t ext_cap_id (16 bit)
442 * uint8_t cap_ver (4 bit)
443 * uint16_t cap_offset (12 bit)
444 * uint16_t ext_cap_size
445 */
446
447 static uint16_t pcie_find_capability_list(PCIDevice *dev, uint16_t cap_id,
448 uint16_t *prev_p)
449 {
450 uint16_t prev = 0;
451 uint16_t next;
452 uint32_t header = pci_get_long(dev->config + PCI_CONFIG_SPACE_SIZE);
453
454 if (!header) {
455 /* no extended capability */
456 next = 0;
457 goto out;
458 }
459 for (next = PCI_CONFIG_SPACE_SIZE; next;
460 prev = next, next = PCI_EXT_CAP_NEXT(header)) {
461
462 assert(next >= PCI_CONFIG_SPACE_SIZE);
463 assert(next <= PCIE_CONFIG_SPACE_SIZE - 8);
464
465 header = pci_get_long(dev->config + next);
466 if (PCI_EXT_CAP_ID(header) == cap_id) {
467 break;
468 }
469 }
470
471 out:
472 if (prev_p) {
473 *prev_p = prev;
474 }
475 return next;
476 }
477
478 uint16_t pcie_find_capability(PCIDevice *dev, uint16_t cap_id)
479 {
480 return pcie_find_capability_list(dev, cap_id, NULL);
481 }
482
483 static void pcie_ext_cap_set_next(PCIDevice *dev, uint16_t pos, uint16_t next)
484 {
485 uint16_t header = pci_get_long(dev->config + pos);
486 assert(!(next & (PCI_EXT_CAP_ALIGN - 1)));
487 header = (header & ~PCI_EXT_CAP_NEXT_MASK) |
488 ((next << PCI_EXT_CAP_NEXT_SHIFT) & PCI_EXT_CAP_NEXT_MASK);
489 pci_set_long(dev->config + pos, header);
490 }
491
492 /*
493 * caller must supply valid (offset, size) * such that the range shouldn't
494 * overlap with other capability or other registers.
495 * This function doesn't check it.
496 */
497 void pcie_add_capability(PCIDevice *dev,
498 uint16_t cap_id, uint8_t cap_ver,
499 uint16_t offset, uint16_t size)
500 {
501 uint32_t header;
502 uint16_t next;
503
504 assert(offset >= PCI_CONFIG_SPACE_SIZE);
505 assert(offset < offset + size);
506 assert(offset + size < PCIE_CONFIG_SPACE_SIZE);
507 assert(size >= 8);
508 assert(pci_is_express(dev));
509
510 if (offset == PCI_CONFIG_SPACE_SIZE) {
511 header = pci_get_long(dev->config + offset);
512 next = PCI_EXT_CAP_NEXT(header);
513 } else {
514 uint16_t prev;
515
516 /* 0 is reserved cap id. use internally to find the last capability
517 in the linked list */
518 next = pcie_find_capability_list(dev, 0, &prev);
519
520 assert(prev >= PCI_CONFIG_SPACE_SIZE);
521 assert(next == 0);
522 pcie_ext_cap_set_next(dev, prev, offset);
523 }
524 pci_set_long(dev->config + offset, PCI_EXT_CAP(cap_id, cap_ver, next));
525
526 /* Make capability read-only by default */
527 memset(dev->wmask + offset, 0, size);
528 memset(dev->w1cmask + offset, 0, size);
529 /* Check capability by default */
530 memset(dev->cmask + offset, 0xFF, size);
531 }
532
533 /**************************************************************************
534 * pci express extended capability helper functions
535 */
536
537 /* ARI */
538 void pcie_ari_init(PCIDevice *dev, uint16_t offset, uint16_t nextfn)
539 {
540 pcie_add_capability(dev, PCI_EXT_CAP_ID_ARI, PCI_ARI_VER,
541 offset, PCI_ARI_SIZEOF);
542 pci_set_long(dev->config + offset + PCI_ARI_CAP, PCI_ARI_CAP_NFN(nextfn));
543 }