hw/realview.c

   1 /*
   2  * ARM RealView Baseboard System emulation.
   3  *
   4  * Copyright (c) 2006-2007 CodeSourcery.
   5  * Written by Paul Brook
   6  *
   7  * This code is licenced under the GPL.
   8  */
   9
  10 #include "sysbus.h"
  11 #include "arm-misc.h"
  12 #include "primecell.h"
  13 #include "devices.h"
  14 #include "pci.h"
  15 #include "usb-ohci.h"
  16 #include "net.h"
  17 #include "sysemu.h"
  18 #include "boards.h"
  19 #include "bitbang_i2c.h"
  20 #include "sysbus.h"
  21
  22 #define SMP_BOOT_ADDR 0xe0000000
  23
  24 typedef struct {
  25     SysBusDevice busdev;
  26     bitbang_i2c_interface *bitbang;
  27     int out;
  28     int in;
  29 } RealViewI2CState;
  30
  31 static uint32_t realview_i2c_read(void *opaque, target_phys_addr_t offset)
  32 {
  33     RealViewI2CState *s = (RealViewI2CState *)opaque;
  34
  35     if (offset == 0) {
  36         return (s->out & 1) | (s->in << 1);
  37     } else {
  38         hw_error("realview_i2c_read: Bad offset 0x%x\n", (int)offset);
  39         return -1;
  40     }
  41 }
  42
  43 static void realview_i2c_write(void *opaque, target_phys_addr_t offset,
  44                                uint32_t value)
  45 {
  46     RealViewI2CState *s = (RealViewI2CState *)opaque;
  47
  48     switch (offset) {
  49     case 0:
  50         s->out |= value & 3;
  51         break;
  52     case 4:
  53         s->out &= ~value;
  54         break;
  55     default:
  56         hw_error("realview_i2c_write: Bad offset 0x%x\n", (int)offset);
  57     }
  58     bitbang_i2c_set(s->bitbang, BITBANG_I2C_SCL, (s->out & 1) != 0);
  59     s->in = bitbang_i2c_set(s->bitbang, BITBANG_I2C_SDA, (s->out & 2) != 0);
  60 }
  61
  62 static CPUReadMemoryFunc * const realview_i2c_readfn[] = {
  63    realview_i2c_read,
  64    realview_i2c_read,
  65    realview_i2c_read
  66 };
  67
  68 static CPUWriteMemoryFunc * const realview_i2c_writefn[] = {
  69    realview_i2c_write,
  70    realview_i2c_write,
  71    realview_i2c_write
  72 };
  73
  74 static int realview_i2c_init(SysBusDevice *dev)
  75 {
  76     RealViewI2CState *s = FROM_SYSBUS(RealViewI2CState, dev);
  77     i2c_bus *bus;
  78     int iomemtype;
  79
  80     bus = i2c_init_bus(&dev->qdev, "i2c");
  81     s->bitbang = bitbang_i2c_init(bus);
  82     iomemtype = cpu_register_io_memory(realview_i2c_readfn,
  83                                        realview_i2c_writefn, s);
  84     sysbus_init_mmio(dev, 0x1000, iomemtype);
  85     return 0;
  86 }
  87
  88 static SysBusDeviceInfo realview_i2c_info = {
  89     .init = realview_i2c_init,
  90     .qdev.name  = "realview_i2c",
  91     .qdev.size  = sizeof(RealViewI2CState),
  92 };
  93
  94 static void realview_register_devices(void)
  95 {
  96     sysbus_register_withprop(&realview_i2c_info);
  97 }
  98
  99 /* Board init.  */
 100
 101 static struct arm_boot_info realview_binfo = {
 102     .smp_loader_start = SMP_BOOT_ADDR,
 103 };
 104
 105 static void secondary_cpu_reset(void *opaque)
 106 {
 107   CPUState *env = opaque;
 108
 109   cpu_reset(env);
 110   /* Set entry point for secondary CPUs.  This assumes we're using
 111      the init code from arm_boot.c.  Real hardware resets all CPUs
 112      the same.  */
 113   env->regs[15] = SMP_BOOT_ADDR;
 114 }
 115
 116 /* The following two lists must be consistent.  */
 117 enum realview_board_type {
 118     BOARD_EB,
 119     BOARD_EB_MPCORE,
 120     BOARD_PB_A8,
 121     BOARD_PBX_A9,
 122 };
 123
 124 static const int realview_board_id[] = {
 125     0x33b,
 126     0x33b,
 127     0x769,
 128     0x76d
 129 };
 130
 131 static void realview_init(ram_addr_t ram_size,
 132                      const char *boot_device,
 133                      const char *kernel_filename, const char *kernel_cmdline,
 134                      const char *initrd_filename, const char *cpu_model,
 135                      enum realview_board_type board_type)
 136 {
 137     CPUState *env = NULL;
 138     ram_addr_t ram_offset;
 139     DeviceState *dev;
 140     SysBusDevice *busdev;
 141     qemu_irq *irqp;
 142     qemu_irq pic[64];
 143     PCIBus *pci_bus;
 144     NICInfo *nd;
 145     i2c_bus *i2c;
 146     int n;
 147     int done_nic = 0;
 148     qemu_irq cpu_irq[4];
 149     int is_mpcore = 0;
 150     int is_pb = 0;
 151     uint32_t proc_id = 0;
 152     uint32_t sys_id;
 153     ram_addr_t low_ram_size;
 154
 155     switch (board_type) {
 156     case BOARD_EB:
 157         break;
 158     case BOARD_EB_MPCORE:
 159         is_mpcore = 1;
 160         break;
 161     case BOARD_PB_A8:
 162         is_pb = 1;
 163         break;
 164     case BOARD_PBX_A9:
 165         is_mpcore = 1;
 166         is_pb = 1;
 167         break;
 168     }
 169     for (n = 0; n < smp_cpus; n++) {
 170         env = cpu_init(cpu_model);
 171         if (!env) {
 172             fprintf(stderr, "Unable to find CPU definition\n");
 173             exit(1);
 174         }
 175         irqp = arm_pic_init_cpu(env);
 176         cpu_irq[n] = irqp[ARM_PIC_CPU_IRQ];
 177         if (n > 0) {
 178             qemu_register_reset(secondary_cpu_reset, env);
 179         }
 180     }
 181     if (arm_feature(env, ARM_FEATURE_V7)) {
 182         if (is_mpcore) {
 183             proc_id = 0x0c000000;
 184         } else {
 185             proc_id = 0x0e000000;
 186         }
 187     } else if (arm_feature(env, ARM_FEATURE_V6K)) {
 188         proc_id = 0x06000000;
 189     } else if (arm_feature(env, ARM_FEATURE_V6)) {
 190         proc_id = 0x04000000;
 191     } else {
 192         proc_id = 0x02000000;
 193     }
 194
 195     ram_offset = qemu_ram_alloc(ram_size);
 196     low_ram_size = ram_size;
 197     if (low_ram_size > 0x10000000)
 198       low_ram_size = 0x10000000;
 199     /* ??? RAM should repeat to fill physical memory space.  */
 200     /* SDRAM at address zero.  */
 201     cpu_register_physical_memory(0, low_ram_size, ram_offset | IO_MEM_RAM);
 202     if (is_pb) {
 203         /* And again at a high address.  */
 204         cpu_register_physical_memory(0x70000000, ram_size,
 205                                      ram_offset | IO_MEM_RAM);
 206     } else {
 207         ram_size = low_ram_size;
 208     }
 209
 210     sys_id = is_pb ? 0x01780500 : 0xc1400400;
 211     arm_sysctl_init(0x10000000, sys_id, proc_id);
 212
 213     if (is_mpcore) {
 214         dev = qdev_create(NULL, is_pb ? "a9mpcore_priv": "realview_mpcore");
 215         qdev_prop_set_uint32(dev, "num-cpu", smp_cpus);
 216         qdev_init_nofail(dev);
 217         busdev = sysbus_from_qdev(dev);
 218         if (is_pb) {
 219             realview_binfo.smp_priv_base = 0x1f000000;
 220         } else {
 221             realview_binfo.smp_priv_base = 0x10100000;
 222         }
 223         sysbus_mmio_map(busdev, 0, realview_binfo.smp_priv_base);
 224         for (n = 0; n < smp_cpus; n++) {
 225             sysbus_connect_irq(busdev, n, cpu_irq[n]);
 226         }
 227     } else {
 228         uint32_t gic_addr = is_pb ? 0x1e000000 : 0x10040000;
 229         /* For now just create the nIRQ GIC, and ignore the others.  */
 230         dev = sysbus_create_simple("realview_gic", gic_addr, cpu_irq[0]);
 231     }
 232     for (n = 0; n < 64; n++) {
 233         pic[n] = qdev_get_gpio_in(dev, n);
 234     }
 235
 236     sysbus_create_simple("pl050_keyboard", 0x10006000, pic[20]);
 237     sysbus_create_simple("pl050_mouse", 0x10007000, pic[21]);
 238
 239     sysbus_create_simple("pl011", 0x10009000, pic[12]);
 240     sysbus_create_simple("pl011", 0x1000a000, pic[13]);
 241     sysbus_create_simple("pl011", 0x1000b000, pic[14]);
 242     sysbus_create_simple("pl011", 0x1000c000, pic[15]);
 243
 244     /* DMA controller is optional, apparently.  */
 245     sysbus_create_simple("pl081", 0x10030000, pic[24]);
 246
 247     sysbus_create_simple("sp804", 0x10011000, pic[4]);
 248     sysbus_create_simple("sp804", 0x10012000, pic[5]);
 249
 250     sysbus_create_simple("pl110_versatile", 0x10020000, pic[23]);
 251
 252     sysbus_create_varargs("pl181", 0x10005000, pic[17], pic[18], NULL);
 253
 254     sysbus_create_simple("pl031", 0x10017000, pic[10]);
 255
 256     if (!is_pb) {
 257         dev = sysbus_create_varargs("realview_pci", 0x60000000,
 258                                     pic[48], pic[49], pic[50], pic[51], NULL);
 259         pci_bus = (PCIBus *)qdev_get_child_bus(dev, "pci");
 260         if (usb_enabled) {
 261             usb_ohci_init_pci(pci_bus, -1);
 262         }
 263         n = drive_get_max_bus(IF_SCSI);
 264         while (n >= 0) {
 265             pci_create_simple(pci_bus, -1, "lsi53c895a");
 266             n--;
 267         }
 268     }
 269     for(n = 0; n < nb_nics; n++) {
 270         nd = &nd_table[n];
 271
 272         if ((!nd->model && !done_nic)
 273             || strcmp(nd->model, is_pb ? "lan9118" : "smc91c111") == 0) {
 274             if (is_pb) {
 275                 lan9118_init(nd, 0x4e000000, pic[28]);
 276             } else {
 277                 smc91c111_init(nd, 0x4e000000, pic[28]);
 278             }
 279             done_nic = 1;
 280         } else {
 281             pci_nic_init_nofail(nd, "rtl8139", NULL);
 282         }
 283     }
 284
 285     dev = sysbus_create_simple("realview_i2c", 0x10002000, NULL);
 286     i2c = (i2c_bus *)qdev_get_child_bus(dev, "i2c");
 287     i2c_create_slave(i2c, "ds1338", 0x68);
 288
 289     /* Memory map for RealView Emulation Baseboard:  */
 290     /* 0x10000000 System registers.  */
 291     /*  0x10001000 System controller.  */
 292     /* 0x10002000 Two-Wire Serial Bus.  */
 293     /* 0x10003000 Reserved.  */
 294     /*  0x10004000 AACI.  */
 295     /*  0x10005000 MCI.  */
 296     /* 0x10006000 KMI0.  */
 297     /* 0x10007000 KMI1.  */
 298     /*  0x10008000 Character LCD. (EB) */
 299     /* 0x10009000 UART0.  */
 300     /* 0x1000a000 UART1.  */
 301     /* 0x1000b000 UART2.  */
 302     /* 0x1000c000 UART3.  */
 303     /*  0x1000d000 SSPI.  */
 304     /*  0x1000e000 SCI.  */
 305     /* 0x1000f000 Reserved.  */
 306     /*  0x10010000 Watchdog.  */
 307     /* 0x10011000 Timer 0+1.  */
 308     /* 0x10012000 Timer 2+3.  */
 309     /*  0x10013000 GPIO 0.  */
 310     /*  0x10014000 GPIO 1.  */
 311     /*  0x10015000 GPIO 2.  */
 312     /*  0x10002000 Two-Wire Serial Bus - DVI. (PB) */
 313     /* 0x10017000 RTC.  */
 314     /*  0x10018000 DMC.  */
 315     /*  0x10019000 PCI controller config.  */
 316     /*  0x10020000 CLCD.  */
 317     /* 0x10030000 DMA Controller.  */
 318     /* 0x10040000 GIC1. (EB) */
 319     /*  0x10050000 GIC2. (EB) */
 320     /*  0x10060000 GIC3. (EB) */
 321     /*  0x10070000 GIC4. (EB) */
 322     /*  0x10080000 SMC.  */
 323     /* 0x1e000000 GIC1. (PB) */
 324     /*  0x1e001000 GIC2. (PB) */
 325     /*  0x1e002000 GIC3. (PB) */
 326     /*  0x1e003000 GIC4. (PB) */
 327     /*  0x40000000 NOR flash.  */
 328     /*  0x44000000 DoC flash.  */
 329     /*  0x48000000 SRAM.  */
 330     /*  0x4c000000 Configuration flash.  */
 331     /* 0x4e000000 Ethernet.  */
 332     /*  0x4f000000 USB.  */
 333     /*  0x50000000 PISMO.  */
 334     /*  0x54000000 PISMO.  */
 335     /*  0x58000000 PISMO.  */
 336     /*  0x5c000000 PISMO.  */
 337     /* 0x60000000 PCI.  */
 338     /* 0x61000000 PCI Self Config.  */
 339     /* 0x62000000 PCI Config.  */
 340     /* 0x63000000 PCI IO.  */
 341     /* 0x64000000 PCI mem 0.  */
 342     /* 0x68000000 PCI mem 1.  */
 343     /* 0x6c000000 PCI mem 2.  */
 344
 345     /* ??? Hack to map an additional page of ram for the secondary CPU
 346        startup code.  I guess this works on real hardware because the
 347        BootROM happens to be in ROM/flash or in memory that isn't clobbered
 348        until after Linux boots the secondary CPUs.  */
 349     ram_offset = qemu_ram_alloc(0x1000);
 350     cpu_register_physical_memory(SMP_BOOT_ADDR, 0x1000,
 351                                  ram_offset | IO_MEM_RAM);
 352
 353     realview_binfo.ram_size = ram_size;
 354     realview_binfo.kernel_filename = kernel_filename;
 355     realview_binfo.kernel_cmdline = kernel_cmdline;
 356     realview_binfo.initrd_filename = initrd_filename;
 357     realview_binfo.nb_cpus = smp_cpus;
 358     realview_binfo.board_id = realview_board_id[board_type];
 359     realview_binfo.loader_start = is_pb ? 0x70000000 : 0;
 360     arm_load_kernel(first_cpu, &realview_binfo);
 361 }
 362
 363 static void realview_eb_init(ram_addr_t ram_size,
 364                      const char *boot_device,
 365                      const char *kernel_filename, const char *kernel_cmdline,
 366                      const char *initrd_filename, const char *cpu_model)
 367 {
 368     if (!cpu_model) {
 369         cpu_model = "arm926";
 370     }
 371     realview_init(ram_size, boot_device, kernel_filename, kernel_cmdline,
 372                   initrd_filename, cpu_model, BOARD_EB);
 373 }
 374
 375 static void realview_eb_mpcore_init(ram_addr_t ram_size,
 376                      const char *boot_device,
 377                      const char *kernel_filename, const char *kernel_cmdline,
 378                      const char *initrd_filename, const char *cpu_model)
 379 {
 380     if (!cpu_model) {
 381         cpu_model = "arm11mpcore";
 382     }
 383     realview_init(ram_size, boot_device, kernel_filename, kernel_cmdline,
 384                   initrd_filename, cpu_model, BOARD_EB_MPCORE);
 385 }
 386
 387 static void realview_pb_a8_init(ram_addr_t ram_size,
 388                      const char *boot_device,
 389                      const char *kernel_filename, const char *kernel_cmdline,
 390                      const char *initrd_filename, const char *cpu_model)
 391 {
 392     if (!cpu_model) {
 393         cpu_model = "cortex-a8";
 394     }
 395     realview_init(ram_size, boot_device, kernel_filename, kernel_cmdline,
 396                   initrd_filename, cpu_model, BOARD_PB_A8);
 397 }
 398
 399 static void realview_pbx_a9_init(ram_addr_t ram_size,
 400                      const char *boot_device,
 401                      const char *kernel_filename, const char *kernel_cmdline,
 402                      const char *initrd_filename, const char *cpu_model)
 403 {
 404     if (!cpu_model) {
 405         cpu_model = "cortex-a9";
 406     }
 407     realview_init(ram_size, boot_device, kernel_filename, kernel_cmdline,
 408                   initrd_filename, cpu_model, BOARD_PBX_A9);
 409 }
 410
 411 static QEMUMachine realview_eb_machine = {
 412     .name = "realview-eb",
 413     .desc = "ARM RealView Emulation Baseboard (ARM926EJ-S)",
 414     .init = realview_eb_init,
 415     .use_scsi = 1,
 416 };
 417
 418 static QEMUMachine realview_eb_mpcore_machine = {
 419     .name = "realview-eb-mpcore",
 420     .desc = "ARM RealView Emulation Baseboard (ARM11MPCore)",
 421     .init = realview_eb_mpcore_init,
 422     .use_scsi = 1,
 423     .max_cpus = 4,
 424 };
 425
 426 static QEMUMachine realview_pb_a8_machine = {
 427     .name = "realview-pb-a8",
 428     .desc = "ARM RealView Platform Baseboard for Cortex-A8",
 429     .init = realview_pb_a8_init,
 430 };
 431
 432 static QEMUMachine realview_pbx_a9_machine = {
 433     .name = "realview-pbx-a9",
 434     .desc = "ARM RealView Platform Baseboard Explore for Cortex-A9",
 435     .init = realview_pbx_a9_init,
 436     .use_scsi = 1,
 437     .max_cpus = 4,
 438 };
 439
 440 static void realview_machine_init(void)
 441 {
 442     qemu_register_machine(&realview_eb_machine);
 443     qemu_register_machine(&realview_eb_mpcore_machine);
 444     qemu_register_machine(&realview_pb_a8_machine);
 445     qemu_register_machine(&realview_pbx_a9_machine);
 446 }
 447
 448 machine_init(realview_machine_init);
 449 device_init(realview_register_devices)