hw/realview.c

   1 /*
   2  * ARM RealView Baseboard System emulation.
   3  *
   4  * Copyright (c) 2006-2007 CodeSourcery.
   5  * Written by Paul Brook
   6  *
   7  * This code is licensed under the GPL.
   8  */
   9
  10 #include "sysbus.h"
  11 #include "arm-misc.h"
  12 #include "primecell.h"
  13 #include "devices.h"
  14 #include "pci.h"
  15 #include "net.h"
  16 #include "sysemu.h"
  17 #include "boards.h"
  18 #include "bitbang_i2c.h"
  19 #include "blockdev.h"
  20 #include "exec-memory.h"
  21
  22 #define SMP_BOOT_ADDR 0xe0000000
  23 #define SMP_BOOTREG_ADDR 0x10000030
  24
  25 typedef struct {
  26     SysBusDevice busdev;
  27     MemoryRegion iomem;
  28     bitbang_i2c_interface *bitbang;
  29     int out;
  30     int in;
  31 } RealViewI2CState;
  32
  33 static uint64_t realview_i2c_read(void *opaque, target_phys_addr_t offset,
  34                                   unsigned size)
  35 {
  36     RealViewI2CState *s = (RealViewI2CState *)opaque;
  37
  38     if (offset == 0) {
  39         return (s->out & 1) | (s->in << 1);
  40     } else {
  41         hw_error("realview_i2c_read: Bad offset 0x%x\n", (int)offset);
  42         return -1;
  43     }
  44 }
  45
  46 static void realview_i2c_write(void *opaque, target_phys_addr_t offset,
  47                                uint64_t value, unsigned size)
  48 {
  49     RealViewI2CState *s = (RealViewI2CState *)opaque;
  50
  51     switch (offset) {
  52     case 0:
  53         s->out |= value & 3;
  54         break;
  55     case 4:
  56         s->out &= ~value;
  57         break;
  58     default:
  59         hw_error("realview_i2c_write: Bad offset 0x%x\n", (int)offset);
  60     }
  61     bitbang_i2c_set(s->bitbang, BITBANG_I2C_SCL, (s->out & 1) != 0);
  62     s->in = bitbang_i2c_set(s->bitbang, BITBANG_I2C_SDA, (s->out & 2) != 0);
  63 }
  64
  65 static const MemoryRegionOps realview_i2c_ops = {
  66     .read = realview_i2c_read,
  67     .write = realview_i2c_write,
  68     .endianness = DEVICE_NATIVE_ENDIAN,
  69 };
  70
  71 static int realview_i2c_init(SysBusDevice *dev)
  72 {
  73     RealViewI2CState *s = FROM_SYSBUS(RealViewI2CState, dev);
  74     i2c_bus *bus;
  75
  76     bus = i2c_init_bus(&dev->qdev, "i2c");
  77     s->bitbang = bitbang_i2c_init(bus);
  78     memory_region_init_io(&s->iomem, &realview_i2c_ops, s,
  79                           "realview-i2c", 0x1000);
  80     sysbus_init_mmio(dev, &s->iomem);
  81     return 0;
  82 }
  83
  84 static void realview_i2c_class_init(ObjectClass *klass, void *data)
  85 {
  86     SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
  87
  88     k->init = realview_i2c_init;
  89 }
  90
  91 static TypeInfo realview_i2c_info = {
  92     .name          = "realview_i2c",
  93     .parent        = TYPE_SYS_BUS_DEVICE,
  94     .instance_size = sizeof(RealViewI2CState),
  95     .class_init    = realview_i2c_class_init,
  96 };
  97
  98 static void realview_register_types(void)
  99 {
 100     type_register_static(&realview_i2c_info);
 101 }
 102
 103 /* Board init.  */
 104
 105 static struct arm_boot_info realview_binfo = {
 106     .smp_loader_start = SMP_BOOT_ADDR,
 107     .smp_bootreg_addr = SMP_BOOTREG_ADDR,
 108 };
 109
 110 /* The following two lists must be consistent.  */
 111 enum realview_board_type {
 112     BOARD_EB,
 113     BOARD_EB_MPCORE,
 114     BOARD_PB_A8,
 115     BOARD_PBX_A9,
 116 };
 117
 118 static const int realview_board_id[] = {
 119     0x33b,
 120     0x33b,
 121     0x769,
 122     0x76d
 123 };
 124
 125 static void realview_init(ram_addr_t ram_size,
 126                      const char *boot_device,
 127                      const char *kernel_filename, const char *kernel_cmdline,
 128                      const char *initrd_filename, const char *cpu_model,
 129                      enum realview_board_type board_type)
 130 {
 131     CPUARMState *env = NULL;
 132     MemoryRegion *sysmem = get_system_memory();
 133     MemoryRegion *ram_lo = g_new(MemoryRegion, 1);
 134     MemoryRegion *ram_hi = g_new(MemoryRegion, 1);
 135     MemoryRegion *ram_alias = g_new(MemoryRegion, 1);
 136     MemoryRegion *ram_hack = g_new(MemoryRegion, 1);
 137     DeviceState *dev, *sysctl, *gpio2, *pl041;
 138     SysBusDevice *busdev;
 139     qemu_irq *irqp;
 140     qemu_irq pic[64];
 141     qemu_irq mmc_irq[2];
 142     PCIBus *pci_bus;
 143     NICInfo *nd;
 144     i2c_bus *i2c;
 145     int n;
 146     int done_nic = 0;
 147     qemu_irq cpu_irq[4];
 148     int is_mpcore = 0;
 149     int is_pb = 0;
 150     uint32_t proc_id = 0;
 151     uint32_t sys_id;
 152     ram_addr_t low_ram_size;
 153
 154     switch (board_type) {
 155     case BOARD_EB:
 156         break;
 157     case BOARD_EB_MPCORE:
 158         is_mpcore = 1;
 159         break;
 160     case BOARD_PB_A8:
 161         is_pb = 1;
 162         break;
 163     case BOARD_PBX_A9:
 164         is_mpcore = 1;
 165         is_pb = 1;
 166         break;
 167     }
 168     for (n = 0; n < smp_cpus; n++) {
 169         env = cpu_init(cpu_model);
 170         if (!env) {
 171             fprintf(stderr, "Unable to find CPU definition\n");
 172             exit(1);
 173         }
 174         irqp = arm_pic_init_cpu(env);
 175         cpu_irq[n] = irqp[ARM_PIC_CPU_IRQ];
 176     }
 177     if (arm_feature(env, ARM_FEATURE_V7)) {
 178         if (is_mpcore) {
 179             proc_id = 0x0c000000;
 180         } else {
 181             proc_id = 0x0e000000;
 182         }
 183     } else if (arm_feature(env, ARM_FEATURE_V6K)) {
 184         proc_id = 0x06000000;
 185     } else if (arm_feature(env, ARM_FEATURE_V6)) {
 186         proc_id = 0x04000000;
 187     } else {
 188         proc_id = 0x02000000;
 189     }
 190
 191     if (is_pb && ram_size > 0x20000000) {
 192         /* Core tile RAM.  */
 193         low_ram_size = ram_size - 0x20000000;
 194         ram_size = 0x20000000;
 195         memory_region_init_ram(ram_lo, "realview.lowmem", low_ram_size);
 196         vmstate_register_ram_global(ram_lo);
 197         memory_region_add_subregion(sysmem, 0x20000000, ram_lo);
 198     }
 199
 200     memory_region_init_ram(ram_hi, "realview.highmem", ram_size);
 201     vmstate_register_ram_global(ram_hi);
 202     low_ram_size = ram_size;
 203     if (low_ram_size > 0x10000000)
 204       low_ram_size = 0x10000000;
 205     /* SDRAM at address zero.  */
 206     memory_region_init_alias(ram_alias, "realview.alias",
 207                              ram_hi, 0, low_ram_size);
 208     memory_region_add_subregion(sysmem, 0, ram_alias);
 209     if (is_pb) {
 210         /* And again at a high address.  */
 211         memory_region_add_subregion(sysmem, 0x70000000, ram_hi);
 212     } else {
 213         ram_size = low_ram_size;
 214     }
 215
 216     sys_id = is_pb ? 0x01780500 : 0xc1400400;
 217     sysctl = qdev_create(NULL, "realview_sysctl");
 218     qdev_prop_set_uint32(sysctl, "sys_id", sys_id);
 219     qdev_prop_set_uint32(sysctl, "proc_id", proc_id);
 220     qdev_init_nofail(sysctl);
 221     sysbus_mmio_map(sysbus_from_qdev(sysctl), 0, 0x10000000);
 222
 223     if (is_mpcore) {
 224         target_phys_addr_t periphbase;
 225         dev = qdev_create(NULL, is_pb ? "a9mpcore_priv": "realview_mpcore");
 226         qdev_prop_set_uint32(dev, "num-cpu", smp_cpus);
 227         qdev_init_nofail(dev);
 228         busdev = sysbus_from_qdev(dev);
 229         if (is_pb) {
 230             periphbase = 0x1f000000;
 231         } else {
 232             periphbase = 0x10100000;
 233         }
 234         sysbus_mmio_map(busdev, 0, periphbase);
 235         for (n = 0; n < smp_cpus; n++) {
 236             sysbus_connect_irq(busdev, n, cpu_irq[n]);
 237         }
 238         sysbus_create_varargs("l2x0", periphbase + 0x2000, NULL);
 239         /* Both A9 and 11MPCore put the GIC CPU i/f at base + 0x100 */
 240         realview_binfo.gic_cpu_if_addr = periphbase + 0x100;
 241     } else {
 242         uint32_t gic_addr = is_pb ? 0x1e000000 : 0x10040000;
 243         /* For now just create the nIRQ GIC, and ignore the others.  */
 244         dev = sysbus_create_simple("realview_gic", gic_addr, cpu_irq[0]);
 245     }
 246     for (n = 0; n < 64; n++) {
 247         pic[n] = qdev_get_gpio_in(dev, n);
 248     }
 249
 250     pl041 = qdev_create(NULL, "pl041");
 251     qdev_prop_set_uint32(pl041, "nc_fifo_depth", 512);
 252     qdev_init_nofail(pl041);
 253     sysbus_mmio_map(sysbus_from_qdev(pl041), 0, 0x10004000);
 254     sysbus_connect_irq(sysbus_from_qdev(pl041), 0, pic[19]);
 255
 256     sysbus_create_simple("pl050_keyboard", 0x10006000, pic[20]);
 257     sysbus_create_simple("pl050_mouse", 0x10007000, pic[21]);
 258
 259     sysbus_create_simple("pl011", 0x10009000, pic[12]);
 260     sysbus_create_simple("pl011", 0x1000a000, pic[13]);
 261     sysbus_create_simple("pl011", 0x1000b000, pic[14]);
 262     sysbus_create_simple("pl011", 0x1000c000, pic[15]);
 263
 264     /* DMA controller is optional, apparently.  */
 265     sysbus_create_simple("pl081", 0x10030000, pic[24]);
 266
 267     sysbus_create_simple("sp804", 0x10011000, pic[4]);
 268     sysbus_create_simple("sp804", 0x10012000, pic[5]);
 269
 270     sysbus_create_simple("pl061", 0x10013000, pic[6]);
 271     sysbus_create_simple("pl061", 0x10014000, pic[7]);
 272     gpio2 = sysbus_create_simple("pl061", 0x10015000, pic[8]);
 273
 274     sysbus_create_simple("pl111", 0x10020000, pic[23]);
 275
 276     dev = sysbus_create_varargs("pl181", 0x10005000, pic[17], pic[18], NULL);
 277     /* Wire up MMC card detect and read-only signals. These have
 278      * to go to both the PL061 GPIO and the sysctl register.
 279      * Note that the PL181 orders these lines (readonly,inserted)
 280      * and the PL061 has them the other way about. Also the card
 281      * detect line is inverted.
 282      */
 283     mmc_irq[0] = qemu_irq_split(
 284         qdev_get_gpio_in(sysctl, ARM_SYSCTL_GPIO_MMC_WPROT),
 285         qdev_get_gpio_in(gpio2, 1));
 286     mmc_irq[1] = qemu_irq_split(
 287         qdev_get_gpio_in(sysctl, ARM_SYSCTL_GPIO_MMC_CARDIN),
 288         qemu_irq_invert(qdev_get_gpio_in(gpio2, 0)));
 289     qdev_connect_gpio_out(dev, 0, mmc_irq[0]);
 290     qdev_connect_gpio_out(dev, 1, mmc_irq[1]);
 291
 292     sysbus_create_simple("pl031", 0x10017000, pic[10]);
 293
 294     if (!is_pb) {
 295         dev = qdev_create(NULL, "realview_pci");
 296         busdev = sysbus_from_qdev(dev);
 297         qdev_init_nofail(dev);
 298         sysbus_mmio_map(busdev, 0, 0x61000000); /* PCI self-config */
 299         sysbus_mmio_map(busdev, 1, 0x62000000); /* PCI config */
 300         sysbus_mmio_map(busdev, 2, 0x63000000); /* PCI I/O */
 301         sysbus_connect_irq(busdev, 0, pic[48]);
 302         sysbus_connect_irq(busdev, 1, pic[49]);
 303         sysbus_connect_irq(busdev, 2, pic[50]);
 304         sysbus_connect_irq(busdev, 3, pic[51]);
 305         pci_bus = (PCIBus *)qdev_get_child_bus(dev, "pci");
 306         if (usb_enabled) {
 307             pci_create_simple(pci_bus, -1, "pci-ohci");
 308         }
 309         n = drive_get_max_bus(IF_SCSI);
 310         while (n >= 0) {
 311             pci_create_simple(pci_bus, -1, "lsi53c895a");
 312             n--;
 313         }
 314     }
 315     for(n = 0; n < nb_nics; n++) {
 316         nd = &nd_table[n];
 317
 318         if (!done_nic && (!nd->model ||
 319                     strcmp(nd->model, is_pb ? "lan9118" : "smc91c111") == 0)) {
 320             if (is_pb) {
 321                 lan9118_init(nd, 0x4e000000, pic[28]);
 322             } else {
 323                 smc91c111_init(nd, 0x4e000000, pic[28]);
 324             }
 325             done_nic = 1;
 326         } else {
 327             pci_nic_init_nofail(nd, "rtl8139", NULL);
 328         }
 329     }
 330
 331     dev = sysbus_create_simple("realview_i2c", 0x10002000, NULL);
 332     i2c = (i2c_bus *)qdev_get_child_bus(dev, "i2c");
 333     i2c_create_slave(i2c, "ds1338", 0x68);
 334
 335     /* Memory map for RealView Emulation Baseboard:  */
 336     /* 0x10000000 System registers.  */
 337     /*  0x10001000 System controller.  */
 338     /* 0x10002000 Two-Wire Serial Bus.  */
 339     /* 0x10003000 Reserved.  */
 340     /*  0x10004000 AACI.  */
 341     /*  0x10005000 MCI.  */
 342     /* 0x10006000 KMI0.  */
 343     /* 0x10007000 KMI1.  */
 344     /*  0x10008000 Character LCD. (EB) */
 345     /* 0x10009000 UART0.  */
 346     /* 0x1000a000 UART1.  */
 347     /* 0x1000b000 UART2.  */
 348     /* 0x1000c000 UART3.  */
 349     /*  0x1000d000 SSPI.  */
 350     /*  0x1000e000 SCI.  */
 351     /* 0x1000f000 Reserved.  */
 352     /*  0x10010000 Watchdog.  */
 353     /* 0x10011000 Timer 0+1.  */
 354     /* 0x10012000 Timer 2+3.  */
 355     /*  0x10013000 GPIO 0.  */
 356     /*  0x10014000 GPIO 1.  */
 357     /*  0x10015000 GPIO 2.  */
 358     /*  0x10002000 Two-Wire Serial Bus - DVI. (PB) */
 359     /* 0x10017000 RTC.  */
 360     /*  0x10018000 DMC.  */
 361     /*  0x10019000 PCI controller config.  */
 362     /*  0x10020000 CLCD.  */
 363     /* 0x10030000 DMA Controller.  */
 364     /* 0x10040000 GIC1. (EB) */
 365     /*  0x10050000 GIC2. (EB) */
 366     /*  0x10060000 GIC3. (EB) */
 367     /*  0x10070000 GIC4. (EB) */
 368     /*  0x10080000 SMC.  */
 369     /* 0x1e000000 GIC1. (PB) */
 370     /*  0x1e001000 GIC2. (PB) */
 371     /*  0x1e002000 GIC3. (PB) */
 372     /*  0x1e003000 GIC4. (PB) */
 373     /*  0x40000000 NOR flash.  */
 374     /*  0x44000000 DoC flash.  */
 375     /*  0x48000000 SRAM.  */
 376     /*  0x4c000000 Configuration flash.  */
 377     /* 0x4e000000 Ethernet.  */
 378     /*  0x4f000000 USB.  */
 379     /*  0x50000000 PISMO.  */
 380     /*  0x54000000 PISMO.  */
 381     /*  0x58000000 PISMO.  */
 382     /*  0x5c000000 PISMO.  */
 383     /* 0x60000000 PCI.  */
 384     /* 0x61000000 PCI Self Config.  */
 385     /* 0x62000000 PCI Config.  */
 386     /* 0x63000000 PCI IO.  */
 387     /* 0x64000000 PCI mem 0.  */
 388     /* 0x68000000 PCI mem 1.  */
 389     /* 0x6c000000 PCI mem 2.  */
 390
 391     /* ??? Hack to map an additional page of ram for the secondary CPU
 392        startup code.  I guess this works on real hardware because the
 393        BootROM happens to be in ROM/flash or in memory that isn't clobbered
 394        until after Linux boots the secondary CPUs.  */
 395     memory_region_init_ram(ram_hack, "realview.hack", 0x1000);
 396     vmstate_register_ram_global(ram_hack);
 397     memory_region_add_subregion(sysmem, SMP_BOOT_ADDR, ram_hack);
 398
 399     realview_binfo.ram_size = ram_size;
 400     realview_binfo.kernel_filename = kernel_filename;
 401     realview_binfo.kernel_cmdline = kernel_cmdline;
 402     realview_binfo.initrd_filename = initrd_filename;
 403     realview_binfo.nb_cpus = smp_cpus;
 404     realview_binfo.board_id = realview_board_id[board_type];
 405     realview_binfo.loader_start = (board_type == BOARD_PB_A8 ? 0x70000000 : 0);
 406     arm_load_kernel(first_cpu, &realview_binfo);
 407 }
 408
 409 static void realview_eb_init(ram_addr_t ram_size,
 410                      const char *boot_device,
 411                      const char *kernel_filename, const char *kernel_cmdline,
 412                      const char *initrd_filename, const char *cpu_model)
 413 {
 414     if (!cpu_model) {
 415         cpu_model = "arm926";
 416     }
 417     realview_init(ram_size, boot_device, kernel_filename, kernel_cmdline,
 418                   initrd_filename, cpu_model, BOARD_EB);
 419 }
 420
 421 static void realview_eb_mpcore_init(ram_addr_t ram_size,
 422                      const char *boot_device,
 423                      const char *kernel_filename, const char *kernel_cmdline,
 424                      const char *initrd_filename, const char *cpu_model)
 425 {
 426     if (!cpu_model) {
 427         cpu_model = "arm11mpcore";
 428     }
 429     realview_init(ram_size, boot_device, kernel_filename, kernel_cmdline,
 430                   initrd_filename, cpu_model, BOARD_EB_MPCORE);
 431 }
 432
 433 static void realview_pb_a8_init(ram_addr_t ram_size,
 434                      const char *boot_device,
 435                      const char *kernel_filename, const char *kernel_cmdline,
 436                      const char *initrd_filename, const char *cpu_model)
 437 {
 438     if (!cpu_model) {
 439         cpu_model = "cortex-a8";
 440     }
 441     realview_init(ram_size, boot_device, kernel_filename, kernel_cmdline,
 442                   initrd_filename, cpu_model, BOARD_PB_A8);
 443 }
 444
 445 static void realview_pbx_a9_init(ram_addr_t ram_size,
 446                      const char *boot_device,
 447                      const char *kernel_filename, const char *kernel_cmdline,
 448                      const char *initrd_filename, const char *cpu_model)
 449 {
 450     if (!cpu_model) {
 451         cpu_model = "cortex-a9";
 452     }
 453     realview_init(ram_size, boot_device, kernel_filename, kernel_cmdline,
 454                   initrd_filename, cpu_model, BOARD_PBX_A9);
 455 }
 456
 457 static QEMUMachine realview_eb_machine = {
 458     .name = "realview-eb",
 459     .desc = "ARM RealView Emulation Baseboard (ARM926EJ-S)",
 460     .init = realview_eb_init,
 461     .use_scsi = 1,
 462 };
 463
 464 static QEMUMachine realview_eb_mpcore_machine = {
 465     .name = "realview-eb-mpcore",
 466     .desc = "ARM RealView Emulation Baseboard (ARM11MPCore)",
 467     .init = realview_eb_mpcore_init,
 468     .use_scsi = 1,
 469     .max_cpus = 4,
 470 };
 471
 472 static QEMUMachine realview_pb_a8_machine = {
 473     .name = "realview-pb-a8",
 474     .desc = "ARM RealView Platform Baseboard for Cortex-A8",
 475     .init = realview_pb_a8_init,
 476 };
 477
 478 static QEMUMachine realview_pbx_a9_machine = {
 479     .name = "realview-pbx-a9",
 480     .desc = "ARM RealView Platform Baseboard Explore for Cortex-A9",
 481     .init = realview_pbx_a9_init,
 482     .use_scsi = 1,
 483     .max_cpus = 4,
 484 };
 485
 486 static void realview_machine_init(void)
 487 {
 488     qemu_register_machine(&realview_eb_machine);
 489     qemu_register_machine(&realview_eb_mpcore_machine);
 490     qemu_register_machine(&realview_pb_a8_machine);
 491     qemu_register_machine(&realview_pbx_a9_machine);
 492 }
 493
 494 machine_init(realview_machine_init);
 495 type_init(realview_register_types)