hw/usb-msd.c

   1 /*
   2  * USB Mass Storage Device emulation
   3  *
   4  * Copyright (c) 2006 CodeSourcery.
   5  * Written by Paul Brook
   6  *
   7  * This code is licensed under the LGPL.
   8  */
   9
  10 #include "qemu-common.h"
  11 #include "qemu-option.h"
  12 #include "qemu-config.h"
  13 #include "usb.h"
  14 #include "usb-desc.h"
  15 #include "scsi.h"
  16 #include "console.h"
  17 #include "monitor.h"
  18 #include "sysemu.h"
  19 #include "blockdev.h"
  20
  21 //#define DEBUG_MSD
  22
  23 #ifdef DEBUG_MSD
  24 #define DPRINTF(fmt, ...) \
  25 do { printf("usb-msd: " fmt , ## __VA_ARGS__); } while (0)
  26 #else
  27 #define DPRINTF(fmt, ...) do {} while(0)
  28 #endif
  29
  30 /* USB requests.  */
  31 #define MassStorageReset  0xff
  32 #define GetMaxLun         0xfe
  33
  34 enum USBMSDMode {
  35     USB_MSDM_CBW, /* Command Block.  */
  36     USB_MSDM_DATAOUT, /* Transfer data to device.  */
  37     USB_MSDM_DATAIN, /* Transfer data from device.  */
  38     USB_MSDM_CSW /* Command Status.  */
  39 };
  40
  41 struct usb_msd_csw {
  42     uint32_t sig;
  43     uint32_t tag;
  44     uint32_t residue;
  45     uint8_t status;
  46 };
  47
  48 typedef struct {
  49     USBDevice dev;
  50     enum USBMSDMode mode;
  51     uint32_t scsi_len;
  52     uint8_t *scsi_buf;
  53     uint32_t data_len;
  54     uint32_t residue;
  55     struct usb_msd_csw csw;
  56     SCSIRequest *req;
  57     SCSIBus bus;
  58     BlockConf conf;
  59     char *serial;
  60     SCSIDevice *scsi_dev;
  61     uint32_t removable;
  62     /* For async completion.  */
  63     USBPacket *packet;
  64 } MSDState;
  65
  66 struct usb_msd_cbw {
  67     uint32_t sig;
  68     uint32_t tag;
  69     uint32_t data_len;
  70     uint8_t flags;
  71     uint8_t lun;
  72     uint8_t cmd_len;
  73     uint8_t cmd[16];
  74 };
  75
  76 enum {
  77     STR_MANUFACTURER = 1,
  78     STR_PRODUCT,
  79     STR_SERIALNUMBER,
  80     STR_CONFIG_FULL,
  81     STR_CONFIG_HIGH,
  82 };
  83
  84 static const USBDescStrings desc_strings = {
  85     [STR_MANUFACTURER] = "QEMU " QEMU_VERSION,
  86     [STR_PRODUCT]      = "QEMU USB HARDDRIVE",
  87     [STR_SERIALNUMBER] = "1",
  88     [STR_CONFIG_FULL]  = "Full speed config (usb 1.1)",
  89     [STR_CONFIG_HIGH]  = "High speed config (usb 2.0)",
  90 };
  91
  92 static const USBDescIface desc_iface_full = {
  93     .bInterfaceNumber              = 0,
  94     .bNumEndpoints                 = 2,
  95     .bInterfaceClass               = USB_CLASS_MASS_STORAGE,
  96     .bInterfaceSubClass            = 0x06, /* SCSI */
  97     .bInterfaceProtocol            = 0x50, /* Bulk */
  98     .eps = (USBDescEndpoint[]) {
  99         {
 100             .bEndpointAddress      = USB_DIR_IN | 0x01,
 101             .bmAttributes          = USB_ENDPOINT_XFER_BULK,
 102             .wMaxPacketSize        = 64,
 103         },{
 104             .bEndpointAddress      = USB_DIR_OUT | 0x02,
 105             .bmAttributes          = USB_ENDPOINT_XFER_BULK,
 106             .wMaxPacketSize        = 64,
 107         },
 108     }
 109 };
 110
 111 static const USBDescDevice desc_device_full = {
 112     .bcdUSB                        = 0x0200,
 113     .bMaxPacketSize0               = 8,
 114     .bNumConfigurations            = 1,
 115     .confs = (USBDescConfig[]) {
 116         {
 117             .bNumInterfaces        = 1,
 118             .bConfigurationValue   = 1,
 119             .iConfiguration        = STR_CONFIG_FULL,
 120             .bmAttributes          = 0xc0,
 121             .nif = 1,
 122             .ifs = &desc_iface_full,
 123         },
 124     },
 125 };
 126
 127 static const USBDescIface desc_iface_high = {
 128     .bInterfaceNumber              = 0,
 129     .bNumEndpoints                 = 2,
 130     .bInterfaceClass               = USB_CLASS_MASS_STORAGE,
 131     .bInterfaceSubClass            = 0x06, /* SCSI */
 132     .bInterfaceProtocol            = 0x50, /* Bulk */
 133     .eps = (USBDescEndpoint[]) {
 134         {
 135             .bEndpointAddress      = USB_DIR_IN | 0x01,
 136             .bmAttributes          = USB_ENDPOINT_XFER_BULK,
 137             .wMaxPacketSize        = 512,
 138         },{
 139             .bEndpointAddress      = USB_DIR_OUT | 0x02,
 140             .bmAttributes          = USB_ENDPOINT_XFER_BULK,
 141             .wMaxPacketSize        = 512,
 142         },
 143     }
 144 };
 145
 146 static const USBDescDevice desc_device_high = {
 147     .bcdUSB                        = 0x0200,
 148     .bMaxPacketSize0               = 64,
 149     .bNumConfigurations            = 1,
 150     .confs = (USBDescConfig[]) {
 151         {
 152             .bNumInterfaces        = 1,
 153             .bConfigurationValue   = 1,
 154             .iConfiguration        = STR_CONFIG_HIGH,
 155             .bmAttributes          = 0xc0,
 156             .nif = 1,
 157             .ifs = &desc_iface_high,
 158         },
 159     },
 160 };
 161
 162 static const USBDesc desc = {
 163     .id = {
 164         .idVendor          = 0x46f4, /* CRC16() of "QEMU" */
 165         .idProduct         = 0x0001,
 166         .bcdDevice         = 0,
 167         .iManufacturer     = STR_MANUFACTURER,
 168         .iProduct          = STR_PRODUCT,
 169         .iSerialNumber     = STR_SERIALNUMBER,
 170     },
 171     .full = &desc_device_full,
 172     .high = &desc_device_high,
 173     .str  = desc_strings,
 174 };
 175
 176 static void usb_msd_copy_data(MSDState *s, USBPacket *p)
 177 {
 178     uint32_t len;
 179     len = p->iov.size - p->result;
 180     if (len > s->scsi_len)
 181         len = s->scsi_len;
 182     usb_packet_copy(p, s->scsi_buf, len);
 183     s->scsi_len -= len;
 184     s->scsi_buf += len;
 185     s->data_len -= len;
 186     if (s->scsi_len == 0 || s->data_len == 0) {
 187         scsi_req_continue(s->req);
 188     }
 189 }
 190
 191 static void usb_msd_send_status(MSDState *s, USBPacket *p)
 192 {
 193     int len;
 194
 195     DPRINTF("Command status %d tag 0x%x, len %zd\n",
 196             s->csw.status, s->csw.tag, p->iov.size);
 197
 198     assert(s->csw.sig == 0x53425355);
 199     len = MIN(sizeof(s->csw), p->iov.size);
 200     usb_packet_copy(p, &s->csw, len);
 201     memset(&s->csw, 0, sizeof(s->csw));
 202 }
 203
 204 static void usb_msd_transfer_data(SCSIRequest *req, uint32_t len)
 205 {
 206     MSDState *s = DO_UPCAST(MSDState, dev.qdev, req->bus->qbus.parent);
 207     USBPacket *p = s->packet;
 208
 209     assert((s->mode == USB_MSDM_DATAOUT) == (req->cmd.mode == SCSI_XFER_TO_DEV));
 210     s->scsi_len = len;
 211     s->scsi_buf = scsi_req_get_buf(req);
 212     if (p) {
 213         usb_msd_copy_data(s, p);
 214         p = s->packet;
 215         if (p && p->result == p->iov.size) {
 216             /* Set s->packet to NULL before calling usb_packet_complete
 217                because another request may be issued before
 218                usb_packet_complete returns.  */
 219             DPRINTF("Packet complete %p\n", p);
 220             s->packet = NULL;
 221             usb_packet_complete(&s->dev, p);
 222         }
 223     }
 224 }
 225
 226 static void usb_msd_command_complete(SCSIRequest *req, uint32_t status)
 227 {
 228     MSDState *s = DO_UPCAST(MSDState, dev.qdev, req->bus->qbus.parent);
 229     USBPacket *p = s->packet;
 230
 231     DPRINTF("Command complete %d tag 0x%x\n", status, req->tag);
 232     s->residue = s->data_len;
 233
 234     s->csw.sig = cpu_to_le32(0x53425355);
 235     s->csw.tag = cpu_to_le32(req->tag);
 236     s->csw.residue = s->residue;
 237     s->csw.status = status != 0;
 238
 239     if (s->packet) {
 240         if (s->data_len == 0 && s->mode == USB_MSDM_DATAOUT) {
 241             /* A deferred packet with no write data remaining must be
 242                the status read packet.  */
 243             usb_msd_send_status(s, p);
 244             s->mode = USB_MSDM_CBW;
 245         } else {
 246             if (s->data_len) {
 247                 int len = (p->iov.size - p->result);
 248                 usb_packet_skip(p, len);
 249                 s->data_len -= len;
 250             }
 251             if (s->data_len == 0) {
 252                 s->mode = USB_MSDM_CSW;
 253             }
 254         }
 255         s->packet = NULL;
 256         usb_packet_complete(&s->dev, p);
 257     } else if (s->data_len == 0) {
 258         s->mode = USB_MSDM_CSW;
 259     }
 260     scsi_req_unref(req);
 261     s->req = NULL;
 262 }
 263
 264 static void usb_msd_request_cancelled(SCSIRequest *req)
 265 {
 266     MSDState *s = DO_UPCAST(MSDState, dev.qdev, req->bus->qbus.parent);
 267
 268     if (req == s->req) {
 269         scsi_req_unref(s->req);
 270         s->req = NULL;
 271         s->packet = NULL;
 272         s->scsi_len = 0;
 273     }
 274 }
 275
 276 static void usb_msd_handle_reset(USBDevice *dev)
 277 {
 278     MSDState *s = (MSDState *)dev;
 279
 280     DPRINTF("Reset\n");
 281     s->mode = USB_MSDM_CBW;
 282 }
 283
 284 static int usb_msd_handle_control(USBDevice *dev, USBPacket *p,
 285                int request, int value, int index, int length, uint8_t *data)
 286 {
 287     MSDState *s = (MSDState *)dev;
 288     int ret;
 289
 290     ret = usb_desc_handle_control(dev, p, request, value, index, length, data);
 291     if (ret >= 0) {
 292         return ret;
 293     }
 294
 295     ret = 0;
 296     switch (request) {
 297     case DeviceRequest | USB_REQ_GET_INTERFACE:
 298         data[0] = 0;
 299         ret = 1;
 300         break;
 301     case DeviceOutRequest | USB_REQ_SET_INTERFACE:
 302         ret = 0;
 303         break;
 304     case EndpointOutRequest | USB_REQ_CLEAR_FEATURE:
 305         ret = 0;
 306         break;
 307     case InterfaceOutRequest | USB_REQ_SET_INTERFACE:
 308         ret = 0;
 309         break;
 310         /* Class specific requests.  */
 311     case ClassInterfaceOutRequest | MassStorageReset:
 312         /* Reset state ready for the next CBW.  */
 313         s->mode = USB_MSDM_CBW;
 314         ret = 0;
 315         break;
 316     case ClassInterfaceRequest | GetMaxLun:
 317         data[0] = 0;
 318         ret = 1;
 319         break;
 320     default:
 321         ret = USB_RET_STALL;
 322         break;
 323     }
 324     return ret;
 325 }
 326
 327 static void usb_msd_cancel_io(USBDevice *dev, USBPacket *p)
 328 {
 329     MSDState *s = DO_UPCAST(MSDState, dev, dev);
 330
 331     if (s->req) {
 332         scsi_req_cancel(s->req);
 333     }
 334 }
 335
 336 static int usb_msd_handle_data(USBDevice *dev, USBPacket *p)
 337 {
 338     MSDState *s = (MSDState *)dev;
 339     uint32_t tag;
 340     int ret = 0;
 341     struct usb_msd_cbw cbw;
 342     uint8_t devep = p->devep;
 343
 344     switch (p->pid) {
 345     case USB_TOKEN_OUT:
 346         if (devep != 2)
 347             goto fail;
 348
 349         switch (s->mode) {
 350         case USB_MSDM_CBW:
 351             if (p->iov.size != 31) {
 352                 fprintf(stderr, "usb-msd: Bad CBW size");
 353                 goto fail;
 354             }
 355             usb_packet_copy(p, &cbw, 31);
 356             if (le32_to_cpu(cbw.sig) != 0x43425355) {
 357                 fprintf(stderr, "usb-msd: Bad signature %08x\n",
 358                         le32_to_cpu(cbw.sig));
 359                 goto fail;
 360             }
 361             DPRINTF("Command on LUN %d\n", cbw.lun);
 362             if (cbw.lun != 0) {
 363                 fprintf(stderr, "usb-msd: Bad LUN %d\n", cbw.lun);
 364                 goto fail;
 365             }
 366             tag = le32_to_cpu(cbw.tag);
 367             s->data_len = le32_to_cpu(cbw.data_len);
 368             if (s->data_len == 0) {
 369                 s->mode = USB_MSDM_CSW;
 370             } else if (cbw.flags & 0x80) {
 371                 s->mode = USB_MSDM_DATAIN;
 372             } else {
 373                 s->mode = USB_MSDM_DATAOUT;
 374             }
 375             DPRINTF("Command tag 0x%x flags %08x len %d data %d\n",
 376                     tag, cbw.flags, cbw.cmd_len, s->data_len);
 377             s->residue = 0;
 378             s->scsi_len = 0;
 379             s->req = scsi_req_new(s->scsi_dev, tag, 0, cbw.cmd, NULL);
 380             scsi_req_enqueue(s->req);
 381             /* ??? Should check that USB and SCSI data transfer
 382                directions match.  */
 383             if (s->mode != USB_MSDM_CSW && s->residue == 0) {
 384                 scsi_req_continue(s->req);
 385             }
 386             ret = p->result;
 387             break;
 388
 389         case USB_MSDM_DATAOUT:
 390             DPRINTF("Data out %zd/%d\n", p->iov.size, s->data_len);
 391             if (p->iov.size > s->data_len) {
 392                 goto fail;
 393             }
 394
 395             if (s->scsi_len) {
 396                 usb_msd_copy_data(s, p);
 397             }
 398             if (s->residue) {
 399                 int len = p->iov.size - p->result;
 400                 if (len) {
 401                     usb_packet_skip(p, len);
 402                     s->data_len -= len;
 403                     if (s->data_len == 0) {
 404                         s->mode = USB_MSDM_CSW;
 405                     }
 406                 }
 407             }
 408             if (p->result < p->iov.size) {
 409                 DPRINTF("Deferring packet %p\n", p);
 410                 s->packet = p;
 411                 ret = USB_RET_ASYNC;
 412             } else {
 413                 ret = p->result;
 414             }
 415             break;
 416
 417         default:
 418             DPRINTF("Unexpected write (len %zd)\n", p->iov.size);
 419             goto fail;
 420         }
 421         break;
 422
 423     case USB_TOKEN_IN:
 424         if (devep != 1)
 425             goto fail;
 426
 427         switch (s->mode) {
 428         case USB_MSDM_DATAOUT:
 429             if (s->data_len != 0 || p->iov.size < 13) {
 430                 goto fail;
 431             }
 432             /* Waiting for SCSI write to complete.  */
 433             s->packet = p;
 434             ret = USB_RET_ASYNC;
 435             break;
 436
 437         case USB_MSDM_CSW:
 438             if (p->iov.size < 13) {
 439                 goto fail;
 440             }
 441
 442             usb_msd_send_status(s, p);
 443             s->mode = USB_MSDM_CBW;
 444             ret = 13;
 445             break;
 446
 447         case USB_MSDM_DATAIN:
 448             DPRINTF("Data in %zd/%d, scsi_len %d\n",
 449                     p->iov.size, s->data_len, s->scsi_len);
 450             if (s->scsi_len) {
 451                 usb_msd_copy_data(s, p);
 452             }
 453             if (s->residue) {
 454                 int len = p->iov.size - p->result;
 455                 if (len) {
 456                     usb_packet_skip(p, len);
 457                     s->data_len -= len;
 458                     if (s->data_len == 0) {
 459                         s->mode = USB_MSDM_CSW;
 460                     }
 461                 }
 462             }
 463             if (p->result < p->iov.size) {
 464                 DPRINTF("Deferring packet %p\n", p);
 465                 s->packet = p;
 466                 ret = USB_RET_ASYNC;
 467             } else {
 468                 ret = p->result;
 469             }
 470             break;
 471
 472         default:
 473             DPRINTF("Unexpected read (len %zd)\n", p->iov.size);
 474             goto fail;
 475         }
 476         break;
 477
 478     default:
 479         DPRINTF("Bad token\n");
 480     fail:
 481         ret = USB_RET_STALL;
 482         break;
 483     }
 484
 485     return ret;
 486 }
 487
 488 static void usb_msd_password_cb(void *opaque, int err)
 489 {
 490     MSDState *s = opaque;
 491
 492     if (!err)
 493         err = usb_device_attach(&s->dev);
 494
 495     if (err)
 496         qdev_unplug(&s->dev.qdev);
 497 }
 498
 499 static const struct SCSIBusInfo usb_msd_scsi_info = {
 500     .tcq = false,
 501     .max_target = 0,
 502     .max_lun = 0,
 503
 504     .transfer_data = usb_msd_transfer_data,
 505     .complete = usb_msd_command_complete,
 506     .cancel = usb_msd_request_cancelled
 507 };
 508
 509 static int usb_msd_initfn(USBDevice *dev)
 510 {
 511     MSDState *s = DO_UPCAST(MSDState, dev, dev);
 512     BlockDriverState *bs = s->conf.bs;
 513     DriveInfo *dinfo;
 514
 515     if (!bs) {
 516         error_report("usb-msd: drive property not set");
 517         return -1;
 518     }
 519
 520     /*
 521      * Hack alert: this pretends to be a block device, but it's really
 522      * a SCSI bus that can serve only a single device, which it
 523      * creates automatically.  But first it needs to detach from its
 524      * blockdev, or else scsi_bus_legacy_add_drive() dies when it
 525      * attaches again.
 526      *
 527      * The hack is probably a bad idea.
 528      */
 529     bdrv_detach_dev(bs, &s->dev.qdev);
 530     s->conf.bs = NULL;
 531
 532     if (!s->serial) {
 533         /* try to fall back to value set with legacy -drive serial=... */
 534         dinfo = drive_get_by_blockdev(bs);
 535         if (*dinfo->serial) {
 536             s->serial = strdup(dinfo->serial);
 537         }
 538     }
 539     if (s->serial) {
 540         usb_desc_set_string(dev, STR_SERIALNUMBER, s->serial);
 541     }
 542
 543     usb_desc_init(dev);
 544     scsi_bus_new(&s->bus, &s->dev.qdev, &usb_msd_scsi_info);
 545     s->scsi_dev = scsi_bus_legacy_add_drive(&s->bus, bs, 0, !!s->removable);
 546     if (!s->scsi_dev) {
 547         return -1;
 548     }
 549     s->bus.qbus.allow_hotplug = 0;
 550     usb_msd_handle_reset(dev);
 551
 552     if (bdrv_key_required(bs)) {
 553         if (cur_mon) {
 554             monitor_read_bdrv_key_start(cur_mon, bs, usb_msd_password_cb, s);
 555             s->dev.auto_attach = 0;
 556         } else {
 557             autostart = 0;
 558         }
 559     }
 560
 561     add_boot_device_path(s->conf.bootindex, &dev->qdev, "/disk@0,0");
 562     return 0;
 563 }
 564
 565 static USBDevice *usb_msd_init(const char *filename)
 566 {
 567     static int nr=0;
 568     char id[8];
 569     QemuOpts *opts;
 570     DriveInfo *dinfo;
 571     USBDevice *dev;
 572     const char *p1;
 573     char fmt[32];
 574
 575     /* parse -usbdevice disk: syntax into drive opts */
 576     snprintf(id, sizeof(id), "usb%d", nr++);
 577     opts = qemu_opts_create(qemu_find_opts("drive"), id, 0);
 578
 579     p1 = strchr(filename, ':');
 580     if (p1++) {
 581         const char *p2;
 582
 583         if (strstart(filename, "format=", &p2)) {
 584             int len = MIN(p1 - p2, sizeof(fmt));
 585             pstrcpy(fmt, len, p2);
 586             qemu_opt_set(opts, "format", fmt);
 587         } else if (*filename != ':') {
 588             printf("unrecognized USB mass-storage option %s\n", filename);
 589             return NULL;
 590         }
 591         filename = p1;
 592     }
 593     if (!*filename) {
 594         printf("block device specification needed\n");
 595         return NULL;
 596     }
 597     qemu_opt_set(opts, "file", filename);
 598     qemu_opt_set(opts, "if", "none");
 599
 600     /* create host drive */
 601     dinfo = drive_init(opts, 0);
 602     if (!dinfo) {
 603         qemu_opts_del(opts);
 604         return NULL;
 605     }
 606
 607     /* create guest device */
 608     dev = usb_create(NULL /* FIXME */, "usb-storage");
 609     if (!dev) {
 610         return NULL;
 611     }
 612     if (qdev_prop_set_drive(&dev->qdev, "drive", dinfo->bdrv) < 0) {
 613         qdev_free(&dev->qdev);
 614         return NULL;
 615     }
 616     if (qdev_init(&dev->qdev) < 0)
 617         return NULL;
 618
 619     return dev;
 620 }
 621
 622 static const VMStateDescription vmstate_usb_msd = {
 623     .name = "usb-storage",
 624     .unmigratable = 1, /* FIXME: handle transactions which are in flight */
 625     .version_id = 1,
 626     .minimum_version_id = 1,
 627     .fields = (VMStateField []) {
 628         VMSTATE_USB_DEVICE(dev, MSDState),
 629         VMSTATE_END_OF_LIST()
 630     }
 631 };
 632
 633 static struct USBDeviceInfo msd_info = {
 634     .product_desc   = "QEMU USB MSD",
 635     .qdev.name      = "usb-storage",
 636     .qdev.fw_name      = "storage",
 637     .qdev.size      = sizeof(MSDState),
 638     .qdev.vmsd      = &vmstate_usb_msd,
 639     .usb_desc       = &desc,
 640     .init           = usb_msd_initfn,
 641     .handle_packet  = usb_generic_handle_packet,
 642     .cancel_packet  = usb_msd_cancel_io,
 643     .handle_attach  = usb_desc_attach,
 644     .handle_reset   = usb_msd_handle_reset,
 645     .handle_control = usb_msd_handle_control,
 646     .handle_data    = usb_msd_handle_data,
 647     .usbdevice_name = "disk",
 648     .usbdevice_init = usb_msd_init,
 649     .qdev.props     = (Property[]) {
 650         DEFINE_BLOCK_PROPERTIES(MSDState, conf),
 651         DEFINE_PROP_STRING("serial", MSDState, serial),
 652         DEFINE_PROP_BIT("removable", MSDState, removable, 0, false),
 653         DEFINE_PROP_END_OF_LIST(),
 654     },
 655 };
 656
 657 static void usb_msd_register_devices(void)
 658 {
 659     usb_qdev_register(&msd_info);
 660 }
 661 device_init(usb_msd_register_devices)