]> git.proxmox.com Git - qemu.git/blob - hw/virtio-net.h
Add a --disable-docs to configure to allow doc build to be disabled
[qemu.git] / hw / virtio-net.h
1 /*
2 * Virtio Network Device
3 *
4 * Copyright IBM, Corp. 2007
5 *
6 * Authors:
7 * Anthony Liguori <aliguori@us.ibm.com>
8 *
9 * This work is licensed under the terms of the GNU GPL, version 2. See
10 * the COPYING file in the top-level directory.
11 *
12 */
13
14 #ifndef _QEMU_VIRTIO_NET_H
15 #define _QEMU_VIRTIO_NET_H
16
17 #include "virtio.h"
18 #include "net.h"
19 #include "pci.h"
20
21 #define ETH_ALEN 6
22
23 /* from Linux's virtio_net.h */
24
25 /* The ID for virtio_net */
26 #define VIRTIO_ID_NET 1
27
28 /* The feature bitmap for virtio net */
29 #define VIRTIO_NET_F_CSUM 0 /* Host handles pkts w/ partial csum */
30 #define VIRTIO_NET_F_GUEST_CSUM 1 /* Guest handles pkts w/ partial csum */
31 #define VIRTIO_NET_F_MAC 5 /* Host has given MAC address. */
32 #define VIRTIO_NET_F_GSO 6 /* Host handles pkts w/ any GSO type */
33 #define VIRTIO_NET_F_GUEST_TSO4 7 /* Guest can handle TSOv4 in. */
34 #define VIRTIO_NET_F_GUEST_TSO6 8 /* Guest can handle TSOv6 in. */
35 #define VIRTIO_NET_F_GUEST_ECN 9 /* Guest can handle TSO[6] w/ ECN in. */
36 #define VIRTIO_NET_F_GUEST_UFO 10 /* Guest can handle UFO in. */
37 #define VIRTIO_NET_F_HOST_TSO4 11 /* Host can handle TSOv4 in. */
38 #define VIRTIO_NET_F_HOST_TSO6 12 /* Host can handle TSOv6 in. */
39 #define VIRTIO_NET_F_HOST_ECN 13 /* Host can handle TSO[6] w/ ECN in. */
40 #define VIRTIO_NET_F_HOST_UFO 14 /* Host can handle UFO in. */
41 #define VIRTIO_NET_F_MRG_RXBUF 15 /* Host can merge receive buffers. */
42 #define VIRTIO_NET_F_STATUS 16 /* virtio_net_config.status available */
43 #define VIRTIO_NET_F_CTRL_VQ 17 /* Control channel available */
44 #define VIRTIO_NET_F_CTRL_RX 18 /* Control channel RX mode support */
45 #define VIRTIO_NET_F_CTRL_VLAN 19 /* Control channel VLAN filtering */
46
47 #define VIRTIO_NET_S_LINK_UP 1 /* Link is up */
48
49 #define TX_TIMER_INTERVAL 150000 /* 150 us */
50
51 /* Maximum packet size we can receive from tap device: header + 64k */
52 #define VIRTIO_NET_MAX_BUFSIZE (sizeof(struct virtio_net_hdr) + (64 << 10))
53
54 struct virtio_net_config
55 {
56 /* The config defining mac address (6 bytes) */
57 uint8_t mac[6];
58 /* See VIRTIO_NET_F_STATUS and VIRTIO_NET_S_* above */
59 uint16_t status;
60 } __attribute__((packed));
61
62 /* This is the first element of the scatter-gather list. If you don't
63 * specify GSO or CSUM features, you can simply ignore the header. */
64 struct virtio_net_hdr
65 {
66 #define VIRTIO_NET_HDR_F_NEEDS_CSUM 1 // Use csum_start, csum_offset
67 uint8_t flags;
68 #define VIRTIO_NET_HDR_GSO_NONE 0 // Not a GSO frame
69 #define VIRTIO_NET_HDR_GSO_TCPV4 1 // GSO frame, IPv4 TCP (TSO)
70 #define VIRTIO_NET_HDR_GSO_UDP 3 // GSO frame, IPv4 UDP (UFO)
71 #define VIRTIO_NET_HDR_GSO_TCPV6 4 // GSO frame, IPv6 TCP
72 #define VIRTIO_NET_HDR_GSO_ECN 0x80 // TCP has ECN set
73 uint8_t gso_type;
74 uint16_t hdr_len;
75 uint16_t gso_size;
76 uint16_t csum_start;
77 uint16_t csum_offset;
78 };
79
80 /* This is the version of the header to use when the MRG_RXBUF
81 * feature has been negotiated. */
82 struct virtio_net_hdr_mrg_rxbuf
83 {
84 struct virtio_net_hdr hdr;
85 uint16_t num_buffers; /* Number of merged rx buffers */
86 };
87
88 PCIDevice *virtio_net_init(PCIBus *bus, NICInfo *nd, int devfn);
89
90 /*
91 * Control virtqueue data structures
92 *
93 * The control virtqueue expects a header in the first sg entry
94 * and an ack/status response in the last entry. Data for the
95 * command goes in between.
96 */
97 struct virtio_net_ctrl_hdr {
98 uint8_t class;
99 uint8_t cmd;
100 };
101
102 typedef uint8_t virtio_net_ctrl_ack;
103
104 #define VIRTIO_NET_OK 0
105 #define VIRTIO_NET_ERR 1
106
107 /*
108 * Control the RX mode, ie. promisucous and allmulti. PROMISC and
109 * ALLMULTI commands require an "out" sg entry containing a 1 byte
110 * state value, zero = disable, non-zero = enable. These commands
111 * are supported with the VIRTIO_NET_F_CTRL_RX feature.
112 */
113 #define VIRTIO_NET_CTRL_RX_MODE 0
114 #define VIRTIO_NET_CTRL_RX_MODE_PROMISC 0
115 #define VIRTIO_NET_CTRL_RX_MODE_ALLMULTI 1
116
117 /*
118 * Control the MAC filter table.
119 *
120 * The MAC filter table is managed by the hypervisor, the guest should
121 * assume the size is infinite. Filtering should be considered
122 * non-perfect, ie. based on hypervisor resources, the guest may
123 * received packets from sources not specified in the filter list.
124 *
125 * In addition to the class/cmd header, the TABLE_SET command requires
126 * two out scatterlists. Each contains a 4 byte count of entries followed
127 * by a concatenated byte stream of the ETH_ALEN MAC addresses. The
128 * first sg list contains unicast addresses, the second is for multicast.
129 * This functionality is present if the VIRTIO_NET_F_CTRL_RX feature
130 * is available.
131 */
132 struct virtio_net_ctrl_mac {
133 uint32_t entries;
134 uint8_t macs[][ETH_ALEN];
135 };
136 #define VIRTIO_NET_CTRL_MAC 1
137 #define VIRTIO_NET_CTRL_MAC_TABLE_SET 0
138
139 /*
140 * Control VLAN filtering
141 *
142 * The VLAN filter table is controlled via a simple ADD/DEL interface.
143 * VLAN IDs not added may be filterd by the hypervisor. Del is the
144 * opposite of add. Both commands expect an out entry containing a 2
145 * byte VLAN ID. VLAN filterting is available with the
146 * VIRTIO_NET_F_CTRL_VLAN feature bit.
147 */
148 #define VIRTIO_NET_CTRL_VLAN 2
149 #define VIRTIO_NET_CTRL_VLAN_ADD 0
150 #define VIRTIO_NET_CTRL_VLAN_DEL 1
151
152 #endif