hw/virtio-pci.c

   1 /*
   2  * Virtio PCI Bindings
   3  *
   4  * Copyright IBM, Corp. 2007
   5  * Copyright (c) 2009 CodeSourcery
   6  *
   7  * Authors:
   8  *  Anthony Liguori   <aliguori@us.ibm.com>
   9  *  Paul Brook        <paul@codesourcery.com>
  10  *
  11  * This work is licensed under the terms of the GNU GPL, version 2.  See
  12  * the COPYING file in the top-level directory.
  13  *
  14  */
  15
  16 #include <inttypes.h>
  17
  18 #include "virtio.h"
  19 #include "virtio-blk.h"
  20 #include "virtio-net.h"
  21 #include "pci.h"
  22 #include "qemu-error.h"
  23 #include "msix.h"
  24 #include "net.h"
  25 #include "loader.h"
  26 #include "kvm.h"
  27 #include "blockdev.h"
  28
  29 /* from Linux's linux/virtio_pci.h */
  30
  31 /* A 32-bit r/o bitmask of the features supported by the host */
  32 #define VIRTIO_PCI_HOST_FEATURES        0
  33
  34 /* A 32-bit r/w bitmask of features activated by the guest */
  35 #define VIRTIO_PCI_GUEST_FEATURES       4
  36
  37 /* A 32-bit r/w PFN for the currently selected queue */
  38 #define VIRTIO_PCI_QUEUE_PFN            8
  39
  40 /* A 16-bit r/o queue size for the currently selected queue */
  41 #define VIRTIO_PCI_QUEUE_NUM            12
  42
  43 /* A 16-bit r/w queue selector */
  44 #define VIRTIO_PCI_QUEUE_SEL            14
  45
  46 /* A 16-bit r/w queue notifier */
  47 #define VIRTIO_PCI_QUEUE_NOTIFY         16
  48
  49 /* An 8-bit device status register.  */
  50 #define VIRTIO_PCI_STATUS               18
  51
  52 /* An 8-bit r/o interrupt status register.  Reading the value will return the
  53  * current contents of the ISR and will also clear it.  This is effectively
  54  * a read-and-acknowledge. */
  55 #define VIRTIO_PCI_ISR                  19
  56
  57 /* MSI-X registers: only enabled if MSI-X is enabled. */
  58 /* A 16-bit vector for configuration changes. */
  59 #define VIRTIO_MSI_CONFIG_VECTOR        20
  60 /* A 16-bit vector for selected queue notifications. */
  61 #define VIRTIO_MSI_QUEUE_VECTOR         22
  62
  63 /* Config space size */
  64 #define VIRTIO_PCI_CONFIG_NOMSI         20
  65 #define VIRTIO_PCI_CONFIG_MSI           24
  66 #define VIRTIO_PCI_REGION_SIZE(dev)     (msix_present(dev) ? \
  67                                          VIRTIO_PCI_CONFIG_MSI : \
  68                                          VIRTIO_PCI_CONFIG_NOMSI)
  69
  70 /* The remaining space is defined by each driver as the per-driver
  71  * configuration space */
  72 #define VIRTIO_PCI_CONFIG(dev)          (msix_enabled(dev) ? \
  73                                          VIRTIO_PCI_CONFIG_MSI : \
  74                                          VIRTIO_PCI_CONFIG_NOMSI)
  75
  76 /* Virtio ABI version, if we increment this, we break the guest driver. */
  77 #define VIRTIO_PCI_ABI_VERSION          0
  78
  79 /* How many bits to shift physical queue address written to QUEUE_PFN.
  80  * 12 is historical, and due to x86 page size. */
  81 #define VIRTIO_PCI_QUEUE_ADDR_SHIFT    12
  82
  83 /* We can catch some guest bugs inside here so we continue supporting older
  84    guests. */
  85 #define VIRTIO_PCI_BUG_BUS_MASTER       (1 << 0)
  86
  87 /* QEMU doesn't strictly need write barriers since everything runs in
  88  * lock-step.  We'll leave the calls to wmb() in though to make it obvious for
  89  * KVM or if kqemu gets SMP support.
  90  */
  91 #define wmb() do { } while (0)
  92
  93 /* PCI bindings.  */
  94
  95 typedef struct {
  96     PCIDevice pci_dev;
  97     VirtIODevice *vdev;
  98     uint32_t bugs;
  99     uint32_t addr;
 100     uint32_t class_code;
 101     uint32_t nvectors;
 102     BlockConf block;
 103     NICConf nic;
 104     uint32_t host_features;
 105 #ifdef CONFIG_LINUX
 106     V9fsConf fsconf;
 107 #endif
 108     /* Max. number of ports we can have for a the virtio-serial device */
 109     uint32_t max_virtserial_ports;
 110     virtio_net_conf net;
 111 } VirtIOPCIProxy;
 112
 113 /* virtio device */
 114
 115 static void virtio_pci_notify(void *opaque, uint16_t vector)
 116 {
 117     VirtIOPCIProxy *proxy = opaque;
 118     if (msix_enabled(&proxy->pci_dev))
 119         msix_notify(&proxy->pci_dev, vector);
 120     else
 121         qemu_set_irq(proxy->pci_dev.irq[0], proxy->vdev->isr & 1);
 122 }
 123
 124 static void virtio_pci_save_config(void * opaque, QEMUFile *f)
 125 {
 126     VirtIOPCIProxy *proxy = opaque;
 127     pci_device_save(&proxy->pci_dev, f);
 128     msix_save(&proxy->pci_dev, f);
 129     if (msix_present(&proxy->pci_dev))
 130         qemu_put_be16(f, proxy->vdev->config_vector);
 131 }
 132
 133 static void virtio_pci_save_queue(void * opaque, int n, QEMUFile *f)
 134 {
 135     VirtIOPCIProxy *proxy = opaque;
 136     if (msix_present(&proxy->pci_dev))
 137         qemu_put_be16(f, virtio_queue_vector(proxy->vdev, n));
 138 }
 139
 140 static int virtio_pci_load_config(void * opaque, QEMUFile *f)
 141 {
 142     VirtIOPCIProxy *proxy = opaque;
 143     int ret;
 144     ret = pci_device_load(&proxy->pci_dev, f);
 145     if (ret) {
 146         return ret;
 147     }
 148     msix_load(&proxy->pci_dev, f);
 149     if (msix_present(&proxy->pci_dev)) {
 150         qemu_get_be16s(f, &proxy->vdev->config_vector);
 151     } else {
 152         proxy->vdev->config_vector = VIRTIO_NO_VECTOR;
 153     }
 154     if (proxy->vdev->config_vector != VIRTIO_NO_VECTOR) {
 155         return msix_vector_use(&proxy->pci_dev, proxy->vdev->config_vector);
 156     }
 157
 158     /* Try to find out if the guest has bus master disabled, but is
 159        in ready state. Then we have a buggy guest OS. */
 160     if ((proxy->vdev->status & VIRTIO_CONFIG_S_DRIVER_OK) &&
 161         !(proxy->pci_dev.config[PCI_COMMAND] & PCI_COMMAND_MASTER)) {
 162         proxy->bugs |= VIRTIO_PCI_BUG_BUS_MASTER;
 163     }
 164     return 0;
 165 }
 166
 167 static int virtio_pci_load_queue(void * opaque, int n, QEMUFile *f)
 168 {
 169     VirtIOPCIProxy *proxy = opaque;
 170     uint16_t vector;
 171     if (msix_present(&proxy->pci_dev)) {
 172         qemu_get_be16s(f, &vector);
 173     } else {
 174         vector = VIRTIO_NO_VECTOR;
 175     }
 176     virtio_queue_set_vector(proxy->vdev, n, vector);
 177     if (vector != VIRTIO_NO_VECTOR) {
 178         return msix_vector_use(&proxy->pci_dev, vector);
 179     }
 180     return 0;
 181 }
 182
 183 static void virtio_pci_reset(DeviceState *d)
 184 {
 185     VirtIOPCIProxy *proxy = container_of(d, VirtIOPCIProxy, pci_dev.qdev);
 186     virtio_reset(proxy->vdev);
 187     msix_reset(&proxy->pci_dev);
 188     proxy->bugs = 0;
 189 }
 190
 191 static void virtio_ioport_write(void *opaque, uint32_t addr, uint32_t val)
 192 {
 193     VirtIOPCIProxy *proxy = opaque;
 194     VirtIODevice *vdev = proxy->vdev;
 195     target_phys_addr_t pa;
 196
 197     switch (addr) {
 198     case VIRTIO_PCI_GUEST_FEATURES:
 199         /* Guest does not negotiate properly?  We have to assume nothing. */
 200         if (val & (1 << VIRTIO_F_BAD_FEATURE)) {
 201             if (vdev->bad_features)
 202                 val = proxy->host_features & vdev->bad_features(vdev);
 203             else
 204                 val = 0;
 205         }
 206         if (vdev->set_features)
 207             vdev->set_features(vdev, val);
 208         vdev->guest_features = val;
 209         break;
 210     case VIRTIO_PCI_QUEUE_PFN:
 211         pa = (target_phys_addr_t)val << VIRTIO_PCI_QUEUE_ADDR_SHIFT;
 212         if (pa == 0) {
 213             virtio_reset(proxy->vdev);
 214             msix_unuse_all_vectors(&proxy->pci_dev);
 215         }
 216         else
 217             virtio_queue_set_addr(vdev, vdev->queue_sel, pa);
 218         break;
 219     case VIRTIO_PCI_QUEUE_SEL:
 220         if (val < VIRTIO_PCI_QUEUE_MAX)
 221             vdev->queue_sel = val;
 222         break;
 223     case VIRTIO_PCI_QUEUE_NOTIFY:
 224         virtio_queue_notify(vdev, val);
 225         break;
 226     case VIRTIO_PCI_STATUS:
 227         virtio_set_status(vdev, val & 0xFF);
 228         if (vdev->status == 0) {
 229             virtio_reset(proxy->vdev);
 230             msix_unuse_all_vectors(&proxy->pci_dev);
 231         }
 232
 233         /* Linux before 2.6.34 sets the device as OK without enabling
 234            the PCI device bus master bit. In this case we need to disable
 235            some safety checks. */
 236         if ((val & VIRTIO_CONFIG_S_DRIVER_OK) &&
 237             !(proxy->pci_dev.config[PCI_COMMAND] & PCI_COMMAND_MASTER)) {
 238             proxy->bugs |= VIRTIO_PCI_BUG_BUS_MASTER;
 239         }
 240         break;
 241     case VIRTIO_MSI_CONFIG_VECTOR:
 242         msix_vector_unuse(&proxy->pci_dev, vdev->config_vector);
 243         /* Make it possible for guest to discover an error took place. */
 244         if (msix_vector_use(&proxy->pci_dev, val) < 0)
 245             val = VIRTIO_NO_VECTOR;
 246         vdev->config_vector = val;
 247         break;
 248     case VIRTIO_MSI_QUEUE_VECTOR:
 249         msix_vector_unuse(&proxy->pci_dev,
 250                           virtio_queue_vector(vdev, vdev->queue_sel));
 251         /* Make it possible for guest to discover an error took place. */
 252         if (msix_vector_use(&proxy->pci_dev, val) < 0)
 253             val = VIRTIO_NO_VECTOR;
 254         virtio_queue_set_vector(vdev, vdev->queue_sel, val);
 255         break;
 256     default:
 257         fprintf(stderr, "%s: unexpected address 0x%x value 0x%x\n",
 258                 __func__, addr, val);
 259         break;
 260     }
 261 }
 262
 263 static uint32_t virtio_ioport_read(VirtIOPCIProxy *proxy, uint32_t addr)
 264 {
 265     VirtIODevice *vdev = proxy->vdev;
 266     uint32_t ret = 0xFFFFFFFF;
 267
 268     switch (addr) {
 269     case VIRTIO_PCI_HOST_FEATURES:
 270         ret = proxy->host_features;
 271         break;
 272     case VIRTIO_PCI_GUEST_FEATURES:
 273         ret = vdev->guest_features;
 274         break;
 275     case VIRTIO_PCI_QUEUE_PFN:
 276         ret = virtio_queue_get_addr(vdev, vdev->queue_sel)
 277               >> VIRTIO_PCI_QUEUE_ADDR_SHIFT;
 278         break;
 279     case VIRTIO_PCI_QUEUE_NUM:
 280         ret = virtio_queue_get_num(vdev, vdev->queue_sel);
 281         break;
 282     case VIRTIO_PCI_QUEUE_SEL:
 283         ret = vdev->queue_sel;
 284         break;
 285     case VIRTIO_PCI_STATUS:
 286         ret = vdev->status;
 287         break;
 288     case VIRTIO_PCI_ISR:
 289         /* reading from the ISR also clears it. */
 290         ret = vdev->isr;
 291         vdev->isr = 0;
 292         qemu_set_irq(proxy->pci_dev.irq[0], 0);
 293         break;
 294     case VIRTIO_MSI_CONFIG_VECTOR:
 295         ret = vdev->config_vector;
 296         break;
 297     case VIRTIO_MSI_QUEUE_VECTOR:
 298         ret = virtio_queue_vector(vdev, vdev->queue_sel);
 299         break;
 300     default:
 301         break;
 302     }
 303
 304     return ret;
 305 }
 306
 307 static uint32_t virtio_pci_config_readb(void *opaque, uint32_t addr)
 308 {
 309     VirtIOPCIProxy *proxy = opaque;
 310     uint32_t config = VIRTIO_PCI_CONFIG(&proxy->pci_dev);
 311     addr -= proxy->addr;
 312     if (addr < config)
 313         return virtio_ioport_read(proxy, addr);
 314     addr -= config;
 315     return virtio_config_readb(proxy->vdev, addr);
 316 }
 317
 318 static uint32_t virtio_pci_config_readw(void *opaque, uint32_t addr)
 319 {
 320     VirtIOPCIProxy *proxy = opaque;
 321     uint32_t config = VIRTIO_PCI_CONFIG(&proxy->pci_dev);
 322     addr -= proxy->addr;
 323     if (addr < config)
 324         return virtio_ioport_read(proxy, addr);
 325     addr -= config;
 326     return virtio_config_readw(proxy->vdev, addr);
 327 }
 328
 329 static uint32_t virtio_pci_config_readl(void *opaque, uint32_t addr)
 330 {
 331     VirtIOPCIProxy *proxy = opaque;
 332     uint32_t config = VIRTIO_PCI_CONFIG(&proxy->pci_dev);
 333     addr -= proxy->addr;
 334     if (addr < config)
 335         return virtio_ioport_read(proxy, addr);
 336     addr -= config;
 337     return virtio_config_readl(proxy->vdev, addr);
 338 }
 339
 340 static void virtio_pci_config_writeb(void *opaque, uint32_t addr, uint32_t val)
 341 {
 342     VirtIOPCIProxy *proxy = opaque;
 343     uint32_t config = VIRTIO_PCI_CONFIG(&proxy->pci_dev);
 344     addr -= proxy->addr;
 345     if (addr < config) {
 346         virtio_ioport_write(proxy, addr, val);
 347         return;
 348     }
 349     addr -= config;
 350     virtio_config_writeb(proxy->vdev, addr, val);
 351 }
 352
 353 static void virtio_pci_config_writew(void *opaque, uint32_t addr, uint32_t val)
 354 {
 355     VirtIOPCIProxy *proxy = opaque;
 356     uint32_t config = VIRTIO_PCI_CONFIG(&proxy->pci_dev);
 357     addr -= proxy->addr;
 358     if (addr < config) {
 359         virtio_ioport_write(proxy, addr, val);
 360         return;
 361     }
 362     addr -= config;
 363     virtio_config_writew(proxy->vdev, addr, val);
 364 }
 365
 366 static void virtio_pci_config_writel(void *opaque, uint32_t addr, uint32_t val)
 367 {
 368     VirtIOPCIProxy *proxy = opaque;
 369     uint32_t config = VIRTIO_PCI_CONFIG(&proxy->pci_dev);
 370     addr -= proxy->addr;
 371     if (addr < config) {
 372         virtio_ioport_write(proxy, addr, val);
 373         return;
 374     }
 375     addr -= config;
 376     virtio_config_writel(proxy->vdev, addr, val);
 377 }
 378
 379 static void virtio_map(PCIDevice *pci_dev, int region_num,
 380                        pcibus_t addr, pcibus_t size, int type)
 381 {
 382     VirtIOPCIProxy *proxy = container_of(pci_dev, VirtIOPCIProxy, pci_dev);
 383     VirtIODevice *vdev = proxy->vdev;
 384     unsigned config_len = VIRTIO_PCI_REGION_SIZE(pci_dev) + vdev->config_len;
 385
 386     proxy->addr = addr;
 387
 388     register_ioport_write(addr, config_len, 1, virtio_pci_config_writeb, proxy);
 389     register_ioport_write(addr, config_len, 2, virtio_pci_config_writew, proxy);
 390     register_ioport_write(addr, config_len, 4, virtio_pci_config_writel, proxy);
 391     register_ioport_read(addr, config_len, 1, virtio_pci_config_readb, proxy);
 392     register_ioport_read(addr, config_len, 2, virtio_pci_config_readw, proxy);
 393     register_ioport_read(addr, config_len, 4, virtio_pci_config_readl, proxy);
 394
 395     if (vdev->config_len)
 396         vdev->get_config(vdev, vdev->config);
 397 }
 398
 399 static void virtio_write_config(PCIDevice *pci_dev, uint32_t address,
 400                                 uint32_t val, int len)
 401 {
 402     VirtIOPCIProxy *proxy = DO_UPCAST(VirtIOPCIProxy, pci_dev, pci_dev);
 403
 404     if (PCI_COMMAND == address) {
 405         if (!(val & PCI_COMMAND_MASTER)) {
 406             if (!(proxy->bugs & VIRTIO_PCI_BUG_BUS_MASTER)) {
 407                 virtio_set_status(proxy->vdev,
 408                                   proxy->vdev->status & ~VIRTIO_CONFIG_S_DRIVER_OK);
 409             }
 410         }
 411     }
 412
 413     pci_default_write_config(pci_dev, address, val, len);
 414     msix_write_config(pci_dev, address, val, len);
 415 }
 416
 417 static unsigned virtio_pci_get_features(void *opaque)
 418 {
 419     VirtIOPCIProxy *proxy = opaque;
 420     return proxy->host_features;
 421 }
 422
 423 static void virtio_pci_guest_notifier_read(void *opaque)
 424 {
 425     VirtQueue *vq = opaque;
 426     EventNotifier *n = virtio_queue_get_guest_notifier(vq);
 427     if (event_notifier_test_and_clear(n)) {
 428         virtio_irq(vq);
 429     }
 430 }
 431
 432 static int virtio_pci_set_guest_notifier(void *opaque, int n, bool assign)
 433 {
 434     VirtIOPCIProxy *proxy = opaque;
 435     VirtQueue *vq = virtio_get_queue(proxy->vdev, n);
 436     EventNotifier *notifier = virtio_queue_get_guest_notifier(vq);
 437
 438     if (assign) {
 439         int r = event_notifier_init(notifier, 0);
 440         if (r < 0) {
 441             return r;
 442         }
 443         qemu_set_fd_handler(event_notifier_get_fd(notifier),
 444                             virtio_pci_guest_notifier_read, NULL, vq);
 445     } else {
 446         qemu_set_fd_handler(event_notifier_get_fd(notifier),
 447                             NULL, NULL, NULL);
 448         event_notifier_cleanup(notifier);
 449     }
 450
 451     return 0;
 452 }
 453
 454 static int virtio_pci_set_host_notifier(void *opaque, int n, bool assign)
 455 {
 456     VirtIOPCIProxy *proxy = opaque;
 457     VirtQueue *vq = virtio_get_queue(proxy->vdev, n);
 458     EventNotifier *notifier = virtio_queue_get_host_notifier(vq);
 459     int r;
 460     if (assign) {
 461         r = event_notifier_init(notifier, 1);
 462         if (r < 0) {
 463             return r;
 464         }
 465         r = kvm_set_ioeventfd_pio_word(event_notifier_get_fd(notifier),
 466                                        proxy->addr + VIRTIO_PCI_QUEUE_NOTIFY,
 467                                        n, assign);
 468         if (r < 0) {
 469             event_notifier_cleanup(notifier);
 470         }
 471     } else {
 472         r = kvm_set_ioeventfd_pio_word(event_notifier_get_fd(notifier),
 473                                        proxy->addr + VIRTIO_PCI_QUEUE_NOTIFY,
 474                                        n, assign);
 475         if (r < 0) {
 476             return r;
 477         }
 478         event_notifier_cleanup(notifier);
 479     }
 480     return r;
 481 }
 482
 483 static const VirtIOBindings virtio_pci_bindings = {
 484     .notify = virtio_pci_notify,
 485     .save_config = virtio_pci_save_config,
 486     .load_config = virtio_pci_load_config,
 487     .save_queue = virtio_pci_save_queue,
 488     .load_queue = virtio_pci_load_queue,
 489     .get_features = virtio_pci_get_features,
 490     .set_host_notifier = virtio_pci_set_host_notifier,
 491     .set_guest_notifier = virtio_pci_set_guest_notifier,
 492 };
 493
 494 static void virtio_init_pci(VirtIOPCIProxy *proxy, VirtIODevice *vdev,
 495                             uint16_t vendor, uint16_t device,
 496                             uint16_t class_code, uint8_t pif)
 497 {
 498     uint8_t *config;
 499     uint32_t size;
 500
 501     proxy->vdev = vdev;
 502
 503     config = proxy->pci_dev.config;
 504     pci_config_set_vendor_id(config, vendor);
 505     pci_config_set_device_id(config, device);
 506
 507     config[0x08] = VIRTIO_PCI_ABI_VERSION;
 508
 509     config[0x09] = pif;
 510     pci_config_set_class(config, class_code);
 511
 512     config[0x2c] = vendor & 0xFF;
 513     config[0x2d] = (vendor >> 8) & 0xFF;
 514     config[0x2e] = vdev->device_id & 0xFF;
 515     config[0x2f] = (vdev->device_id >> 8) & 0xFF;
 516
 517     config[0x3d] = 1;
 518
 519     if (vdev->nvectors && !msix_init(&proxy->pci_dev, vdev->nvectors, 1, 0)) {
 520         pci_register_bar(&proxy->pci_dev, 1,
 521                          msix_bar_size(&proxy->pci_dev),
 522                          PCI_BASE_ADDRESS_SPACE_MEMORY,
 523                          msix_mmio_map);
 524     } else
 525         vdev->nvectors = 0;
 526
 527     proxy->pci_dev.config_write = virtio_write_config;
 528
 529     size = VIRTIO_PCI_REGION_SIZE(&proxy->pci_dev) + vdev->config_len;
 530     if (size & (size-1))
 531         size = 1 << qemu_fls(size);
 532
 533     pci_register_bar(&proxy->pci_dev, 0, size, PCI_BASE_ADDRESS_SPACE_IO,
 534                            virtio_map);
 535
 536     virtio_bind_device(vdev, &virtio_pci_bindings, proxy);
 537     proxy->host_features |= 0x1 << VIRTIO_F_NOTIFY_ON_EMPTY;
 538     proxy->host_features |= 0x1 << VIRTIO_F_BAD_FEATURE;
 539     proxy->host_features = vdev->get_features(vdev, proxy->host_features);
 540 }
 541
 542 static int virtio_blk_init_pci(PCIDevice *pci_dev)
 543 {
 544     VirtIOPCIProxy *proxy = DO_UPCAST(VirtIOPCIProxy, pci_dev, pci_dev);
 545     VirtIODevice *vdev;
 546
 547     if (proxy->class_code != PCI_CLASS_STORAGE_SCSI &&
 548         proxy->class_code != PCI_CLASS_STORAGE_OTHER)
 549         proxy->class_code = PCI_CLASS_STORAGE_SCSI;
 550
 551     vdev = virtio_blk_init(&pci_dev->qdev, &proxy->block);
 552     if (!vdev) {
 553         return -1;
 554     }
 555     vdev->nvectors = proxy->nvectors;
 556     virtio_init_pci(proxy, vdev,
 557                     PCI_VENDOR_ID_REDHAT_QUMRANET,
 558                     PCI_DEVICE_ID_VIRTIO_BLOCK,
 559                     proxy->class_code, 0x00);
 560     /* make the actual value visible */
 561     proxy->nvectors = vdev->nvectors;
 562     return 0;
 563 }
 564
 565 static int virtio_exit_pci(PCIDevice *pci_dev)
 566 {
 567     return msix_uninit(pci_dev);
 568 }
 569
 570 static int virtio_blk_exit_pci(PCIDevice *pci_dev)
 571 {
 572     VirtIOPCIProxy *proxy = DO_UPCAST(VirtIOPCIProxy, pci_dev, pci_dev);
 573
 574     virtio_blk_exit(proxy->vdev);
 575     blockdev_mark_auto_del(proxy->block.bs);
 576     return virtio_exit_pci(pci_dev);
 577 }
 578
 579 static int virtio_serial_init_pci(PCIDevice *pci_dev)
 580 {
 581     VirtIOPCIProxy *proxy = DO_UPCAST(VirtIOPCIProxy, pci_dev, pci_dev);
 582     VirtIODevice *vdev;
 583
 584     if (proxy->class_code != PCI_CLASS_COMMUNICATION_OTHER &&
 585         proxy->class_code != PCI_CLASS_DISPLAY_OTHER && /* qemu 0.10 */
 586         proxy->class_code != PCI_CLASS_OTHERS)          /* qemu-kvm  */
 587         proxy->class_code = PCI_CLASS_COMMUNICATION_OTHER;
 588
 589     vdev = virtio_serial_init(&pci_dev->qdev, proxy->max_virtserial_ports);
 590     if (!vdev) {
 591         return -1;
 592     }
 593     vdev->nvectors = proxy->nvectors == DEV_NVECTORS_UNSPECIFIED
 594                                         ? proxy->max_virtserial_ports + 1
 595                                         : proxy->nvectors;
 596     virtio_init_pci(proxy, vdev,
 597                     PCI_VENDOR_ID_REDHAT_QUMRANET,
 598                     PCI_DEVICE_ID_VIRTIO_CONSOLE,
 599                     proxy->class_code, 0x00);
 600     proxy->nvectors = vdev->nvectors;
 601     return 0;
 602 }
 603
 604 static int virtio_serial_exit_pci(PCIDevice *pci_dev)
 605 {
 606     VirtIOPCIProxy *proxy = DO_UPCAST(VirtIOPCIProxy, pci_dev, pci_dev);
 607
 608     virtio_serial_exit(proxy->vdev);
 609     return virtio_exit_pci(pci_dev);
 610 }
 611
 612 static int virtio_net_init_pci(PCIDevice *pci_dev)
 613 {
 614     VirtIOPCIProxy *proxy = DO_UPCAST(VirtIOPCIProxy, pci_dev, pci_dev);
 615     VirtIODevice *vdev;
 616
 617     vdev = virtio_net_init(&pci_dev->qdev, &proxy->nic, &proxy->net);
 618
 619     vdev->nvectors = proxy->nvectors;
 620     virtio_init_pci(proxy, vdev,
 621                     PCI_VENDOR_ID_REDHAT_QUMRANET,
 622                     PCI_DEVICE_ID_VIRTIO_NET,
 623                     PCI_CLASS_NETWORK_ETHERNET,
 624                     0x00);
 625
 626     /* make the actual value visible */
 627     proxy->nvectors = vdev->nvectors;
 628     return 0;
 629 }
 630
 631 static int virtio_net_exit_pci(PCIDevice *pci_dev)
 632 {
 633     VirtIOPCIProxy *proxy = DO_UPCAST(VirtIOPCIProxy, pci_dev, pci_dev);
 634
 635     virtio_net_exit(proxy->vdev);
 636     return virtio_exit_pci(pci_dev);
 637 }
 638
 639 static int virtio_balloon_init_pci(PCIDevice *pci_dev)
 640 {
 641     VirtIOPCIProxy *proxy = DO_UPCAST(VirtIOPCIProxy, pci_dev, pci_dev);
 642     VirtIODevice *vdev;
 643
 644     vdev = virtio_balloon_init(&pci_dev->qdev);
 645     virtio_init_pci(proxy, vdev,
 646                     PCI_VENDOR_ID_REDHAT_QUMRANET,
 647                     PCI_DEVICE_ID_VIRTIO_BALLOON,
 648                     PCI_CLASS_MEMORY_RAM,
 649                     0x00);
 650     return 0;
 651 }
 652
 653 #ifdef CONFIG_VIRTFS
 654 static int virtio_9p_init_pci(PCIDevice *pci_dev)
 655 {
 656     VirtIOPCIProxy *proxy = DO_UPCAST(VirtIOPCIProxy, pci_dev, pci_dev);
 657     VirtIODevice *vdev;
 658
 659     vdev = virtio_9p_init(&pci_dev->qdev, &proxy->fsconf);
 660     virtio_init_pci(proxy, vdev,
 661                     PCI_VENDOR_ID_REDHAT_QUMRANET,
 662                     0x1009,
 663                     0x2,
 664                     0x00);
 665
 666     return 0;
 667 }
 668 #endif
 669
 670 static PCIDeviceInfo virtio_info[] = {
 671     {
 672         .qdev.name = "virtio-blk-pci",
 673         .qdev.size = sizeof(VirtIOPCIProxy),
 674         .init      = virtio_blk_init_pci,
 675         .exit      = virtio_blk_exit_pci,
 676         .qdev.props = (Property[]) {
 677             DEFINE_PROP_HEX32("class", VirtIOPCIProxy, class_code, 0),
 678             DEFINE_BLOCK_PROPERTIES(VirtIOPCIProxy, block),
 679             DEFINE_PROP_UINT32("vectors", VirtIOPCIProxy, nvectors, 2),
 680             DEFINE_VIRTIO_BLK_FEATURES(VirtIOPCIProxy, host_features),
 681             DEFINE_PROP_END_OF_LIST(),
 682         },
 683         .qdev.reset = virtio_pci_reset,
 684     },{
 685         .qdev.name  = "virtio-net-pci",
 686         .qdev.size  = sizeof(VirtIOPCIProxy),
 687         .init       = virtio_net_init_pci,
 688         .exit       = virtio_net_exit_pci,
 689         .romfile    = "pxe-virtio.bin",
 690         .qdev.props = (Property[]) {
 691             DEFINE_PROP_UINT32("vectors", VirtIOPCIProxy, nvectors, 3),
 692             DEFINE_VIRTIO_NET_FEATURES(VirtIOPCIProxy, host_features),
 693             DEFINE_NIC_PROPERTIES(VirtIOPCIProxy, nic),
 694             DEFINE_PROP_UINT32("x-txtimer", VirtIOPCIProxy,
 695                                net.txtimer, TX_TIMER_INTERVAL),
 696             DEFINE_PROP_INT32("x-txburst", VirtIOPCIProxy,
 697                               net.txburst, TX_BURST),
 698             DEFINE_PROP_STRING("tx", VirtIOPCIProxy, net.tx),
 699             DEFINE_PROP_END_OF_LIST(),
 700         },
 701         .qdev.reset = virtio_pci_reset,
 702     },{
 703         .qdev.name = "virtio-serial-pci",
 704         .qdev.alias = "virtio-serial",
 705         .qdev.size = sizeof(VirtIOPCIProxy),
 706         .init      = virtio_serial_init_pci,
 707         .exit      = virtio_serial_exit_pci,
 708         .qdev.props = (Property[]) {
 709             DEFINE_PROP_UINT32("vectors", VirtIOPCIProxy, nvectors,
 710                                DEV_NVECTORS_UNSPECIFIED),
 711             DEFINE_PROP_HEX32("class", VirtIOPCIProxy, class_code, 0),
 712             DEFINE_VIRTIO_COMMON_FEATURES(VirtIOPCIProxy, host_features),
 713             DEFINE_PROP_UINT32("max_ports", VirtIOPCIProxy, max_virtserial_ports,
 714                                31),
 715             DEFINE_PROP_END_OF_LIST(),
 716         },
 717         .qdev.reset = virtio_pci_reset,
 718     },{
 719         .qdev.name = "virtio-balloon-pci",
 720         .qdev.size = sizeof(VirtIOPCIProxy),
 721         .init      = virtio_balloon_init_pci,
 722         .exit      = virtio_exit_pci,
 723         .qdev.props = (Property[]) {
 724             DEFINE_VIRTIO_COMMON_FEATURES(VirtIOPCIProxy, host_features),
 725             DEFINE_PROP_END_OF_LIST(),
 726         },
 727         .qdev.reset = virtio_pci_reset,
 728     },{
 729 #ifdef CONFIG_VIRTFS
 730         .qdev.name = "virtio-9p-pci",
 731         .qdev.size = sizeof(VirtIOPCIProxy),
 732         .init      = virtio_9p_init_pci,
 733         .qdev.props = (Property[]) {
 734             DEFINE_VIRTIO_COMMON_FEATURES(VirtIOPCIProxy, host_features),
 735             DEFINE_PROP_STRING("mount_tag", VirtIOPCIProxy, fsconf.tag),
 736             DEFINE_PROP_STRING("fsdev", VirtIOPCIProxy, fsconf.fsdev_id),
 737             DEFINE_PROP_END_OF_LIST(),
 738         },
 739     }, {
 740 #endif
 741         /* end of list */
 742     }
 743 };
 744
 745 static void virtio_pci_register_devices(void)
 746 {
 747     pci_qdev_register_many(virtio_info);
 748 }
 749
 750 device_init(virtio_pci_register_devices)