4 * The contents of this file are subject to the terms of the
5 * Common Development and Distribution License (the "License").
6 * You may not use this file except in compliance with the License.
8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9 * or http://www.opensolaris.org/os/licensing.
10 * See the License for the specific language governing permissions
11 * and limitations under the License.
13 * When distributing Covered Code, include this CDDL HEADER in each
14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15 * If applicable, add the following below this CDDL HEADER, with the
16 * fields enclosed by brackets "[]" replaced with your own identifying
17 * information: Portions Copyright [yyyy] [name of copyright owner]
22 * Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved.
23 * Copyright (c) 2012 by Delphix. All rights reserved.
24 * Copyright (c) 2012, Joyent, Inc. All rights reserved.
27 /* Portions Copyright 2010 Robert Milkowski */
33 * This file describes the interface that the DMU provides for its
36 * The DMU also interacts with the SPA. That interface is described in
40 #include <sys/inttypes.h>
41 #include <sys/types.h>
42 #include <sys/param.h>
45 #include <sys/fs/zfs.h>
71 typedef struct objset objset_t
;
72 typedef struct dmu_tx dmu_tx_t
;
73 typedef struct dsl_dir dsl_dir_t
;
75 typedef enum dmu_object_byteswap
{
87 * Allocating a new byteswap type number makes the on-disk format
88 * incompatible with any other format that uses the same number.
90 * Data can usually be structured to work with one of the
91 * DMU_BSWAP_UINT* or DMU_BSWAP_ZAP types.
94 } dmu_object_byteswap_t
;
96 #define DMU_OT_NEWTYPE 0x80
97 #define DMU_OT_METADATA 0x40
98 #define DMU_OT_BYTESWAP_MASK 0x3f
101 * Defines a uint8_t object type. Object types specify if the data
102 * in the object is metadata (boolean) and how to byteswap the data
103 * (dmu_object_byteswap_t).
105 #define DMU_OT(byteswap, metadata) \
107 ((metadata) ? DMU_OT_METADATA : 0) | \
108 ((byteswap) & DMU_OT_BYTESWAP_MASK))
110 #define DMU_OT_IS_VALID(ot) (((ot) & DMU_OT_NEWTYPE) ? \
111 ((ot) & DMU_OT_BYTESWAP_MASK) < DMU_BSWAP_NUMFUNCS : \
112 (ot) < DMU_OT_NUMTYPES)
114 #define DMU_OT_IS_METADATA(ot) (((ot) & DMU_OT_NEWTYPE) ? \
115 ((ot) & DMU_OT_METADATA) : \
116 dmu_ot[(int)(ot)].ot_metadata)
118 #define DMU_OT_BYTESWAP(ot) (((ot) & DMU_OT_NEWTYPE) ? \
119 ((ot) & DMU_OT_BYTESWAP_MASK) : \
120 dmu_ot[(int)(ot)].ot_byteswap)
122 typedef enum dmu_object_type
{
125 DMU_OT_OBJECT_DIRECTORY
, /* ZAP */
126 DMU_OT_OBJECT_ARRAY
, /* UINT64 */
127 DMU_OT_PACKED_NVLIST
, /* UINT8 (XDR by nvlist_pack/unpack) */
128 DMU_OT_PACKED_NVLIST_SIZE
, /* UINT64 */
129 DMU_OT_BPOBJ
, /* UINT64 */
130 DMU_OT_BPOBJ_HDR
, /* UINT64 */
132 DMU_OT_SPACE_MAP_HEADER
, /* UINT64 */
133 DMU_OT_SPACE_MAP
, /* UINT64 */
135 DMU_OT_INTENT_LOG
, /* UINT64 */
137 DMU_OT_DNODE
, /* DNODE */
138 DMU_OT_OBJSET
, /* OBJSET */
140 DMU_OT_DSL_DIR
, /* UINT64 */
141 DMU_OT_DSL_DIR_CHILD_MAP
, /* ZAP */
142 DMU_OT_DSL_DS_SNAP_MAP
, /* ZAP */
143 DMU_OT_DSL_PROPS
, /* ZAP */
144 DMU_OT_DSL_DATASET
, /* UINT64 */
146 DMU_OT_ZNODE
, /* ZNODE */
147 DMU_OT_OLDACL
, /* Old ACL */
148 DMU_OT_PLAIN_FILE_CONTENTS
, /* UINT8 */
149 DMU_OT_DIRECTORY_CONTENTS
, /* ZAP */
150 DMU_OT_MASTER_NODE
, /* ZAP */
151 DMU_OT_UNLINKED_SET
, /* ZAP */
153 DMU_OT_ZVOL
, /* UINT8 */
154 DMU_OT_ZVOL_PROP
, /* ZAP */
155 /* other; for testing only! */
156 DMU_OT_PLAIN_OTHER
, /* UINT8 */
157 DMU_OT_UINT64_OTHER
, /* UINT64 */
158 DMU_OT_ZAP_OTHER
, /* ZAP */
159 /* new object types: */
160 DMU_OT_ERROR_LOG
, /* ZAP */
161 DMU_OT_SPA_HISTORY
, /* UINT8 */
162 DMU_OT_SPA_HISTORY_OFFSETS
, /* spa_his_phys_t */
163 DMU_OT_POOL_PROPS
, /* ZAP */
164 DMU_OT_DSL_PERMS
, /* ZAP */
165 DMU_OT_ACL
, /* ACL */
166 DMU_OT_SYSACL
, /* SYSACL */
167 DMU_OT_FUID
, /* FUID table (Packed NVLIST UINT8) */
168 DMU_OT_FUID_SIZE
, /* FUID table size UINT64 */
169 DMU_OT_NEXT_CLONES
, /* ZAP */
170 DMU_OT_SCAN_QUEUE
, /* ZAP */
171 DMU_OT_USERGROUP_USED
, /* ZAP */
172 DMU_OT_USERGROUP_QUOTA
, /* ZAP */
173 DMU_OT_USERREFS
, /* ZAP */
174 DMU_OT_DDT_ZAP
, /* ZAP */
175 DMU_OT_DDT_STATS
, /* ZAP */
176 DMU_OT_SA
, /* System attr */
177 DMU_OT_SA_MASTER_NODE
, /* ZAP */
178 DMU_OT_SA_ATTR_REGISTRATION
, /* ZAP */
179 DMU_OT_SA_ATTR_LAYOUTS
, /* ZAP */
180 DMU_OT_SCAN_XLATE
, /* ZAP */
181 DMU_OT_DEDUP
, /* fake dedup BP from ddt_bp_create() */
182 DMU_OT_DEADLIST
, /* ZAP */
183 DMU_OT_DEADLIST_HDR
, /* UINT64 */
184 DMU_OT_DSL_CLONES
, /* ZAP */
185 DMU_OT_BPOBJ_SUBOBJ
, /* UINT64 */
187 * Do not allocate new object types here. Doing so makes the on-disk
188 * format incompatible with any other format that uses the same object
191 * When creating an object which does not have one of the above types
192 * use the DMU_OTN_* type with the correct byteswap and metadata
195 * The DMU_OTN_* types do not have entries in the dmu_ot table,
196 * use the DMU_OT_IS_METDATA() and DMU_OT_BYTESWAP() macros instead
197 * of indexing into dmu_ot directly (this works for both DMU_OT_* types
198 * and DMU_OTN_* types).
203 * Names for valid types declared with DMU_OT().
205 DMU_OTN_UINT8_DATA
= DMU_OT(DMU_BSWAP_UINT8
, B_FALSE
),
206 DMU_OTN_UINT8_METADATA
= DMU_OT(DMU_BSWAP_UINT8
, B_TRUE
),
207 DMU_OTN_UINT16_DATA
= DMU_OT(DMU_BSWAP_UINT16
, B_FALSE
),
208 DMU_OTN_UINT16_METADATA
= DMU_OT(DMU_BSWAP_UINT16
, B_TRUE
),
209 DMU_OTN_UINT32_DATA
= DMU_OT(DMU_BSWAP_UINT32
, B_FALSE
),
210 DMU_OTN_UINT32_METADATA
= DMU_OT(DMU_BSWAP_UINT32
, B_TRUE
),
211 DMU_OTN_UINT64_DATA
= DMU_OT(DMU_BSWAP_UINT64
, B_FALSE
),
212 DMU_OTN_UINT64_METADATA
= DMU_OT(DMU_BSWAP_UINT64
, B_TRUE
),
213 DMU_OTN_ZAP_DATA
= DMU_OT(DMU_BSWAP_ZAP
, B_FALSE
),
214 DMU_OTN_ZAP_METADATA
= DMU_OT(DMU_BSWAP_ZAP
, B_TRUE
),
217 typedef enum txg_how
{
222 void byteswap_uint64_array(void *buf
, size_t size
);
223 void byteswap_uint32_array(void *buf
, size_t size
);
224 void byteswap_uint16_array(void *buf
, size_t size
);
225 void byteswap_uint8_array(void *buf
, size_t size
);
226 void zap_byteswap(void *buf
, size_t size
);
227 void zfs_oldacl_byteswap(void *buf
, size_t size
);
228 void zfs_acl_byteswap(void *buf
, size_t size
);
229 void zfs_znode_byteswap(void *buf
, size_t size
);
231 #define DS_FIND_SNAPSHOTS (1<<0)
232 #define DS_FIND_CHILDREN (1<<1)
235 * The maximum number of bytes that can be accessed as part of one
236 * operation, including metadata.
238 #define DMU_MAX_ACCESS (10<<20) /* 10MB */
239 #define DMU_MAX_DELETEBLKCNT (20480) /* ~5MB of indirect blocks */
241 #define DMU_USERUSED_OBJECT (-1ULL)
242 #define DMU_GROUPUSED_OBJECT (-2ULL)
243 #define DMU_DEADLIST_OBJECT (-3ULL)
246 * artificial blkids for bonus buffer and spill blocks
248 #define DMU_BONUS_BLKID (-1ULL)
249 #define DMU_SPILL_BLKID (-2ULL)
251 * Public routines to create, destroy, open, and close objsets.
253 int dmu_objset_hold(const char *name
, void *tag
, objset_t
**osp
);
254 int dmu_objset_own(const char *name
, dmu_objset_type_t type
,
255 boolean_t readonly
, void *tag
, objset_t
**osp
);
256 void dmu_objset_rele(objset_t
*os
, void *tag
);
257 void dmu_objset_disown(objset_t
*os
, void *tag
);
258 int dmu_objset_open_ds(struct dsl_dataset
*ds
, objset_t
**osp
);
260 void dmu_objset_evict_dbufs(objset_t
*os
);
261 int dmu_objset_create(const char *name
, dmu_objset_type_t type
, uint64_t flags
,
262 void (*func
)(objset_t
*os
, void *arg
, cred_t
*cr
, dmu_tx_t
*tx
), void *arg
);
263 int dmu_objset_clone(const char *name
, const char *origin
);
264 int dsl_destroy_snapshots_nvl(struct nvlist
*snaps
, boolean_t defer
,
265 struct nvlist
*errlist
);
266 int dmu_objset_snapshot_one(const char *fsname
, const char *snapname
);
267 int dmu_objset_snapshot_tmp(const char *, const char *, int);
268 int dmu_objset_find(char *name
, int func(const char *, void *), void *arg
,
270 void dmu_objset_byteswap(void *buf
, size_t size
);
271 int dsl_dataset_rename_snapshot(const char *fsname
,
272 const char *oldsnapname
, const char *newsnapname
, boolean_t recursive
);
274 typedef struct dmu_buf
{
275 uint64_t db_object
; /* object that this buffer is part of */
276 uint64_t db_offset
; /* byte offset in this object */
277 uint64_t db_size
; /* size of buffer in bytes */
278 void *db_data
; /* data in buffer */
281 typedef void dmu_buf_evict_func_t(struct dmu_buf
*db
, void *user_ptr
);
284 * The names of zap entries in the DIRECTORY_OBJECT of the MOS.
286 #define DMU_POOL_DIRECTORY_OBJECT 1
287 #define DMU_POOL_CONFIG "config"
288 #define DMU_POOL_FEATURES_FOR_WRITE "features_for_write"
289 #define DMU_POOL_FEATURES_FOR_READ "features_for_read"
290 #define DMU_POOL_FEATURE_DESCRIPTIONS "feature_descriptions"
291 #define DMU_POOL_ROOT_DATASET "root_dataset"
292 #define DMU_POOL_SYNC_BPOBJ "sync_bplist"
293 #define DMU_POOL_ERRLOG_SCRUB "errlog_scrub"
294 #define DMU_POOL_ERRLOG_LAST "errlog_last"
295 #define DMU_POOL_SPARES "spares"
296 #define DMU_POOL_DEFLATE "deflate"
297 #define DMU_POOL_HISTORY "history"
298 #define DMU_POOL_PROPS "pool_props"
299 #define DMU_POOL_L2CACHE "l2cache"
300 #define DMU_POOL_TMP_USERREFS "tmp_userrefs"
301 #define DMU_POOL_DDT "DDT-%s-%s-%s"
302 #define DMU_POOL_DDT_STATS "DDT-statistics"
303 #define DMU_POOL_CREATION_VERSION "creation_version"
304 #define DMU_POOL_SCAN "scan"
305 #define DMU_POOL_FREE_BPOBJ "free_bpobj"
306 #define DMU_POOL_BPTREE_OBJ "bptree_obj"
307 #define DMU_POOL_EMPTY_BPOBJ "empty_bpobj"
310 * Allocate an object from this objset. The range of object numbers
311 * available is (0, DN_MAX_OBJECT). Object 0 is the meta-dnode.
313 * The transaction must be assigned to a txg. The newly allocated
314 * object will be "held" in the transaction (ie. you can modify the
315 * newly allocated object in this transaction).
317 * dmu_object_alloc() chooses an object and returns it in *objectp.
319 * dmu_object_claim() allocates a specific object number. If that
320 * number is already allocated, it fails and returns EEXIST.
322 * Return 0 on success, or ENOSPC or EEXIST as specified above.
324 uint64_t dmu_object_alloc(objset_t
*os
, dmu_object_type_t ot
,
325 int blocksize
, dmu_object_type_t bonus_type
, int bonus_len
, dmu_tx_t
*tx
);
326 int dmu_object_claim(objset_t
*os
, uint64_t object
, dmu_object_type_t ot
,
327 int blocksize
, dmu_object_type_t bonus_type
, int bonus_len
, dmu_tx_t
*tx
);
328 int dmu_object_reclaim(objset_t
*os
, uint64_t object
, dmu_object_type_t ot
,
329 int blocksize
, dmu_object_type_t bonustype
, int bonuslen
);
332 * Free an object from this objset.
334 * The object's data will be freed as well (ie. you don't need to call
335 * dmu_free(object, 0, -1, tx)).
337 * The object need not be held in the transaction.
339 * If there are any holds on this object's buffers (via dmu_buf_hold()),
340 * or tx holds on the object (via dmu_tx_hold_object()), you can not
341 * free it; it fails and returns EBUSY.
343 * If the object is not allocated, it fails and returns ENOENT.
345 * Return 0 on success, or EBUSY or ENOENT as specified above.
347 int dmu_object_free(objset_t
*os
, uint64_t object
, dmu_tx_t
*tx
);
350 * Find the next allocated or free object.
352 * The objectp parameter is in-out. It will be updated to be the next
353 * object which is allocated. Ignore objects which have not been
354 * modified since txg.
356 * XXX Can only be called on a objset with no dirty data.
358 * Returns 0 on success, or ENOENT if there are no more objects.
360 int dmu_object_next(objset_t
*os
, uint64_t *objectp
,
361 boolean_t hole
, uint64_t txg
);
364 * Set the data blocksize for an object.
366 * The object cannot have any blocks allcated beyond the first. If
367 * the first block is allocated already, the new size must be greater
368 * than the current block size. If these conditions are not met,
369 * ENOTSUP will be returned.
371 * Returns 0 on success, or EBUSY if there are any holds on the object
372 * contents, or ENOTSUP as described above.
374 int dmu_object_set_blocksize(objset_t
*os
, uint64_t object
, uint64_t size
,
375 int ibs
, dmu_tx_t
*tx
);
378 * Set the checksum property on a dnode. The new checksum algorithm will
379 * apply to all newly written blocks; existing blocks will not be affected.
381 void dmu_object_set_checksum(objset_t
*os
, uint64_t object
, uint8_t checksum
,
385 * Set the compress property on a dnode. The new compression algorithm will
386 * apply to all newly written blocks; existing blocks will not be affected.
388 void dmu_object_set_compress(objset_t
*os
, uint64_t object
, uint8_t compress
,
392 * Decide how to write a block: checksum, compression, number of copies, etc.
394 #define WP_NOFILL 0x1
395 #define WP_DMU_SYNC 0x2
398 void dmu_write_policy(objset_t
*os
, struct dnode
*dn
, int level
, int wp
,
399 struct zio_prop
*zp
);
401 * The bonus data is accessed more or less like a regular buffer.
402 * You must dmu_bonus_hold() to get the buffer, which will give you a
403 * dmu_buf_t with db_offset==-1ULL, and db_size = the size of the bonus
404 * data. As with any normal buffer, you must call dmu_buf_read() to
405 * read db_data, dmu_buf_will_dirty() before modifying it, and the
406 * object must be held in an assigned transaction before calling
407 * dmu_buf_will_dirty. You may use dmu_buf_set_user() on the bonus
408 * buffer as well. You must release what you hold with dmu_buf_rele().
410 int dmu_bonus_hold(objset_t
*os
, uint64_t object
, void *tag
, dmu_buf_t
**);
411 int dmu_bonus_max(void);
412 int dmu_set_bonus(dmu_buf_t
*, int, dmu_tx_t
*);
413 int dmu_set_bonustype(dmu_buf_t
*, dmu_object_type_t
, dmu_tx_t
*);
414 dmu_object_type_t
dmu_get_bonustype(dmu_buf_t
*);
415 int dmu_rm_spill(objset_t
*, uint64_t, dmu_tx_t
*);
418 * Special spill buffer support used by "SA" framework
421 int dmu_spill_hold_by_bonus(dmu_buf_t
*bonus
, void *tag
, dmu_buf_t
**dbp
);
422 int dmu_spill_hold_by_dnode(struct dnode
*dn
, uint32_t flags
,
423 void *tag
, dmu_buf_t
**dbp
);
424 int dmu_spill_hold_existing(dmu_buf_t
*bonus
, void *tag
, dmu_buf_t
**dbp
);
427 * Obtain the DMU buffer from the specified object which contains the
428 * specified offset. dmu_buf_hold() puts a "hold" on the buffer, so
429 * that it will remain in memory. You must release the hold with
430 * dmu_buf_rele(). You must not access the dmu_buf_t after releasing
431 * what you hold. You must have a hold on any dmu_buf_t* you pass to the DMU.
433 * You must call dmu_buf_read, dmu_buf_will_dirty, or dmu_buf_will_fill
434 * on the returned buffer before reading or writing the buffer's
435 * db_data. The comments for those routines describe what particular
436 * operations are valid after calling them.
438 * The object number must be a valid, allocated object number.
440 int dmu_buf_hold(objset_t
*os
, uint64_t object
, uint64_t offset
,
441 void *tag
, dmu_buf_t
**, int flags
);
442 void dmu_buf_add_ref(dmu_buf_t
*db
, void* tag
);
443 void dmu_buf_rele(dmu_buf_t
*db
, void *tag
);
444 uint64_t dmu_buf_refcount(dmu_buf_t
*db
);
447 * dmu_buf_hold_array holds the DMU buffers which contain all bytes in a
448 * range of an object. A pointer to an array of dmu_buf_t*'s is
449 * returned (in *dbpp).
451 * dmu_buf_rele_array releases the hold on an array of dmu_buf_t*'s, and
452 * frees the array. The hold on the array of buffers MUST be released
453 * with dmu_buf_rele_array. You can NOT release the hold on each buffer
454 * individually with dmu_buf_rele.
456 int dmu_buf_hold_array_by_bonus(dmu_buf_t
*db
, uint64_t offset
,
457 uint64_t length
, int read
, void *tag
, int *numbufsp
, dmu_buf_t
***dbpp
);
458 void dmu_buf_rele_array(dmu_buf_t
**, int numbufs
, void *tag
);
461 * Returns NULL on success, or the existing user ptr if it's already
464 * user_ptr is for use by the user and can be obtained via dmu_buf_get_user().
466 * user_data_ptr_ptr should be NULL, or a pointer to a pointer which
467 * will be set to db->db_data when you are allowed to access it. Note
468 * that db->db_data (the pointer) can change when you do dmu_buf_read(),
469 * dmu_buf_tryupgrade(), dmu_buf_will_dirty(), or dmu_buf_will_fill().
470 * *user_data_ptr_ptr will be set to the new value when it changes.
472 * If non-NULL, pageout func will be called when this buffer is being
473 * excised from the cache, so that you can clean up the data structure
474 * pointed to by user_ptr.
476 * dmu_evict_user() will call the pageout func for all buffers in a
477 * objset with a given pageout func.
479 void *dmu_buf_set_user(dmu_buf_t
*db
, void *user_ptr
, void *user_data_ptr_ptr
,
480 dmu_buf_evict_func_t
*pageout_func
);
482 * set_user_ie is the same as set_user, but request immediate eviction
483 * when hold count goes to zero.
485 void *dmu_buf_set_user_ie(dmu_buf_t
*db
, void *user_ptr
,
486 void *user_data_ptr_ptr
, dmu_buf_evict_func_t
*pageout_func
);
487 void *dmu_buf_update_user(dmu_buf_t
*db_fake
, void *old_user_ptr
,
488 void *user_ptr
, void *user_data_ptr_ptr
,
489 dmu_buf_evict_func_t
*pageout_func
);
490 void dmu_evict_user(objset_t
*os
, dmu_buf_evict_func_t
*func
);
493 * Returns the user_ptr set with dmu_buf_set_user(), or NULL if not set.
495 void *dmu_buf_get_user(dmu_buf_t
*db
);
498 * Indicate that you are going to modify the buffer's data (db_data).
500 * The transaction (tx) must be assigned to a txg (ie. you've called
501 * dmu_tx_assign()). The buffer's object must be held in the tx
502 * (ie. you've called dmu_tx_hold_object(tx, db->db_object)).
504 void dmu_buf_will_dirty(dmu_buf_t
*db
, dmu_tx_t
*tx
);
507 * Tells if the given dbuf is freeable.
509 boolean_t
dmu_buf_freeable(dmu_buf_t
*);
512 * You must create a transaction, then hold the objects which you will
513 * (or might) modify as part of this transaction. Then you must assign
514 * the transaction to a transaction group. Once the transaction has
515 * been assigned, you can modify buffers which belong to held objects as
516 * part of this transaction. You can't modify buffers before the
517 * transaction has been assigned; you can't modify buffers which don't
518 * belong to objects which this transaction holds; you can't hold
519 * objects once the transaction has been assigned. You may hold an
520 * object which you are going to free (with dmu_object_free()), but you
523 * You can abort the transaction before it has been assigned.
525 * Note that you may hold buffers (with dmu_buf_hold) at any time,
526 * regardless of transaction state.
529 #define DMU_NEW_OBJECT (-1ULL)
530 #define DMU_OBJECT_END (-1ULL)
532 dmu_tx_t
*dmu_tx_create(objset_t
*os
);
533 void dmu_tx_hold_write(dmu_tx_t
*tx
, uint64_t object
, uint64_t off
, int len
);
534 void dmu_tx_hold_free(dmu_tx_t
*tx
, uint64_t object
, uint64_t off
,
536 void dmu_tx_hold_zap(dmu_tx_t
*tx
, uint64_t object
, int add
, const char *name
);
537 void dmu_tx_hold_bonus(dmu_tx_t
*tx
, uint64_t object
);
538 void dmu_tx_hold_spill(dmu_tx_t
*tx
, uint64_t object
);
539 void dmu_tx_hold_sa(dmu_tx_t
*tx
, struct sa_handle
*hdl
, boolean_t may_grow
);
540 void dmu_tx_hold_sa_create(dmu_tx_t
*tx
, int total_size
);
541 void dmu_tx_abort(dmu_tx_t
*tx
);
542 int dmu_tx_assign(dmu_tx_t
*tx
, enum txg_how txg_how
);
543 void dmu_tx_wait(dmu_tx_t
*tx
);
544 void dmu_tx_commit(dmu_tx_t
*tx
);
547 * To register a commit callback, dmu_tx_callback_register() must be called.
549 * dcb_data is a pointer to caller private data that is passed on as a
550 * callback parameter. The caller is responsible for properly allocating and
553 * When registering a callback, the transaction must be already created, but
554 * it cannot be committed or aborted. It can be assigned to a txg or not.
556 * The callback will be called after the transaction has been safely written
557 * to stable storage and will also be called if the dmu_tx is aborted.
558 * If there is any error which prevents the transaction from being committed to
559 * disk, the callback will be called with a value of error != 0.
561 typedef void dmu_tx_callback_func_t(void *dcb_data
, int error
);
563 void dmu_tx_callback_register(dmu_tx_t
*tx
, dmu_tx_callback_func_t
*dcb_func
,
567 * Free up the data blocks for a defined range of a file. If size is
568 * -1, the range from offset to end-of-file is freed.
570 int dmu_free_range(objset_t
*os
, uint64_t object
, uint64_t offset
,
571 uint64_t size
, dmu_tx_t
*tx
);
572 int dmu_free_long_range(objset_t
*os
, uint64_t object
, uint64_t offset
,
574 int dmu_free_object(objset_t
*os
, uint64_t object
);
577 * Convenience functions.
579 * Canfail routines will return 0 on success, or an errno if there is a
580 * nonrecoverable I/O error.
582 #define DMU_READ_PREFETCH 0 /* prefetch */
583 #define DMU_READ_NO_PREFETCH 1 /* don't prefetch */
584 int dmu_read(objset_t
*os
, uint64_t object
, uint64_t offset
, uint64_t size
,
585 void *buf
, uint32_t flags
);
586 void dmu_write(objset_t
*os
, uint64_t object
, uint64_t offset
, uint64_t size
,
587 const void *buf
, dmu_tx_t
*tx
);
588 void dmu_prealloc(objset_t
*os
, uint64_t object
, uint64_t offset
, uint64_t size
,
591 #include <linux/blkdev_compat.h>
592 int dmu_read_req(objset_t
*os
, uint64_t object
, struct request
*req
);
593 int dmu_write_req(objset_t
*os
, uint64_t object
, struct request
*req
,
595 int dmu_read_uio(objset_t
*os
, uint64_t object
, struct uio
*uio
, uint64_t size
);
596 int dmu_write_uio(objset_t
*os
, uint64_t object
, struct uio
*uio
, uint64_t size
,
598 int dmu_write_uio_dbuf(dmu_buf_t
*zdb
, struct uio
*uio
, uint64_t size
,
601 struct arc_buf
*dmu_request_arcbuf(dmu_buf_t
*handle
, int size
);
602 void dmu_return_arcbuf(struct arc_buf
*buf
);
603 void dmu_assign_arcbuf(dmu_buf_t
*handle
, uint64_t offset
, struct arc_buf
*buf
,
605 int dmu_xuio_init(struct xuio
*uio
, int niov
);
606 void dmu_xuio_fini(struct xuio
*uio
);
607 int dmu_xuio_add(struct xuio
*uio
, struct arc_buf
*abuf
, offset_t off
,
609 int dmu_xuio_cnt(struct xuio
*uio
);
610 struct arc_buf
*dmu_xuio_arcbuf(struct xuio
*uio
, int i
);
611 void dmu_xuio_clear(struct xuio
*uio
, int i
);
612 void xuio_stat_wbuf_copied(void);
613 void xuio_stat_wbuf_nocopy(void);
615 extern int zfs_prefetch_disable
;
618 * Asynchronously try to read in the data.
620 void dmu_prefetch(objset_t
*os
, uint64_t object
, uint64_t offset
,
623 typedef struct dmu_object_info
{
624 /* All sizes are in bytes unless otherwise indicated. */
625 uint32_t doi_data_block_size
;
626 uint32_t doi_metadata_block_size
;
627 dmu_object_type_t doi_type
;
628 dmu_object_type_t doi_bonus_type
;
629 uint64_t doi_bonus_size
;
630 uint8_t doi_indirection
; /* 2 = dnode->indirect->data */
631 uint8_t doi_checksum
;
632 uint8_t doi_compress
;
634 uint64_t doi_physical_blocks_512
; /* data + metadata, 512b blks */
635 uint64_t doi_max_offset
;
636 uint64_t doi_fill_count
; /* number of non-empty blocks */
639 typedef void (*const arc_byteswap_func_t
)(void *buf
, size_t size
);
641 typedef struct dmu_object_type_info
{
642 dmu_object_byteswap_t ot_byteswap
;
643 boolean_t ot_metadata
;
645 } dmu_object_type_info_t
;
647 typedef const struct dmu_object_byteswap_info
{
648 arc_byteswap_func_t ob_func
;
650 } dmu_object_byteswap_info_t
;
652 extern const dmu_object_type_info_t dmu_ot
[DMU_OT_NUMTYPES
];
653 extern const dmu_object_byteswap_info_t dmu_ot_byteswap
[DMU_BSWAP_NUMFUNCS
];
656 * Get information on a DMU object.
658 * Return 0 on success or ENOENT if object is not allocated.
660 * If doi is NULL, just indicates whether the object exists.
662 int dmu_object_info(objset_t
*os
, uint64_t object
, dmu_object_info_t
*doi
);
663 void __dmu_object_info_from_dnode(struct dnode
*dn
, dmu_object_info_t
*doi
);
664 void dmu_object_info_from_dnode(struct dnode
*dn
, dmu_object_info_t
*doi
);
665 void dmu_object_info_from_db(dmu_buf_t
*db
, dmu_object_info_t
*doi
);
666 void dmu_object_size_from_db(dmu_buf_t
*db
, uint32_t *blksize
,
667 u_longlong_t
*nblk512
);
669 typedef struct dmu_objset_stats
{
670 uint64_t dds_num_clones
; /* number of clones of this */
671 uint64_t dds_creation_txg
;
673 dmu_objset_type_t dds_type
;
674 uint8_t dds_is_snapshot
;
675 uint8_t dds_inconsistent
;
676 char dds_origin
[MAXNAMELEN
];
677 } dmu_objset_stats_t
;
680 * Get stats on a dataset.
682 void dmu_objset_fast_stat(objset_t
*os
, dmu_objset_stats_t
*stat
);
685 * Add entries to the nvlist for all the objset's properties. See
686 * zfs_prop_table[] and zfs(1m) for details on the properties.
688 void dmu_objset_stats(objset_t
*os
, struct nvlist
*nv
);
691 * Get the space usage statistics for statvfs().
693 * refdbytes is the amount of space "referenced" by this objset.
694 * availbytes is the amount of space available to this objset, taking
695 * into account quotas & reservations, assuming that no other objsets
696 * use the space first. These values correspond to the 'referenced' and
697 * 'available' properties, described in the zfs(1m) manpage.
699 * usedobjs and availobjs are the number of objects currently allocated,
702 void dmu_objset_space(objset_t
*os
, uint64_t *refdbytesp
, uint64_t *availbytesp
,
703 uint64_t *usedobjsp
, uint64_t *availobjsp
);
706 * The fsid_guid is a 56-bit ID that can change to avoid collisions.
707 * (Contrast with the ds_guid which is a 64-bit ID that will never
708 * change, so there is a small probability that it will collide.)
710 uint64_t dmu_objset_fsid_guid(objset_t
*os
);
713 * Get the [cm]time for an objset's snapshot dir
715 timestruc_t
dmu_objset_snap_cmtime(objset_t
*os
);
717 int dmu_objset_is_snapshot(objset_t
*os
);
719 extern struct spa
*dmu_objset_spa(objset_t
*os
);
720 extern struct zilog
*dmu_objset_zil(objset_t
*os
);
721 extern struct dsl_pool
*dmu_objset_pool(objset_t
*os
);
722 extern struct dsl_dataset
*dmu_objset_ds(objset_t
*os
);
723 extern void dmu_objset_name(objset_t
*os
, char *buf
);
724 extern dmu_objset_type_t
dmu_objset_type(objset_t
*os
);
725 extern uint64_t dmu_objset_id(objset_t
*os
);
726 extern uint64_t dmu_objset_syncprop(objset_t
*os
);
727 extern uint64_t dmu_objset_logbias(objset_t
*os
);
728 extern int dmu_snapshot_list_next(objset_t
*os
, int namelen
, char *name
,
729 uint64_t *id
, uint64_t *offp
, boolean_t
*case_conflict
);
730 extern int dmu_snapshot_lookup(objset_t
*os
, const char *name
, uint64_t *val
);
731 extern int dmu_snapshot_realname(objset_t
*os
, char *name
, char *real
,
732 int maxlen
, boolean_t
*conflict
);
733 extern int dmu_dir_list_next(objset_t
*os
, int namelen
, char *name
,
734 uint64_t *idp
, uint64_t *offp
);
736 typedef int objset_used_cb_t(dmu_object_type_t bonustype
,
737 void *bonus
, uint64_t *userp
, uint64_t *groupp
);
738 extern void dmu_objset_register_type(dmu_objset_type_t ost
,
739 objset_used_cb_t
*cb
);
740 extern void dmu_objset_set_user(objset_t
*os
, void *user_ptr
);
741 extern void *dmu_objset_get_user(objset_t
*os
);
744 * Return the txg number for the given assigned transaction.
746 uint64_t dmu_tx_get_txg(dmu_tx_t
*tx
);
750 * If a parent zio is provided this function initiates a write on the
751 * provided buffer as a child of the parent zio.
752 * In the absence of a parent zio, the write is completed synchronously.
753 * At write completion, blk is filled with the bp of the written block.
754 * Note that while the data covered by this function will be on stable
755 * storage when the write completes this new data does not become a
756 * permanent part of the file until the associated transaction commits.
760 * {zfs,zvol,ztest}_get_done() args
763 struct zilog
*zgd_zilog
;
764 struct blkptr
*zgd_bp
;
770 typedef void dmu_sync_cb_t(zgd_t
*arg
, int error
);
771 int dmu_sync(struct zio
*zio
, uint64_t txg
, dmu_sync_cb_t
*done
, zgd_t
*zgd
);
774 * Find the next hole or data block in file starting at *off
775 * Return found offset in *off. Return ESRCH for end of file.
777 int dmu_offset_next(objset_t
*os
, uint64_t object
, boolean_t hole
,
781 * Initial setup and final teardown.
783 extern void dmu_init(void);
784 extern void dmu_fini(void);
786 typedef void (*dmu_traverse_cb_t
)(objset_t
*os
, void *arg
, struct blkptr
*bp
,
787 uint64_t object
, uint64_t offset
, int len
);
788 void dmu_traverse_objset(objset_t
*os
, uint64_t txg_start
,
789 dmu_traverse_cb_t cb
, void *arg
);
791 int dmu_diff(const char *tosnap_name
, const char *fromsnap_name
,
792 struct vnode
*vp
, offset_t
*offp
);
795 #define ZFS_CRC64_POLY 0xC96C5795D7870F42ULL /* ECMA-182, reflected form */
796 extern uint64_t zfs_crc64_table
[256];
798 extern int zfs_mdcomp_disable
;
804 #endif /* _SYS_DMU_H */