pmg-quick-start.adoc

   1 Quick Start Guide
   2 =================
   3
   4 Experienced users can use this guide for a quick installation. For
   5 detailed instructions please read the whole documentation.
   6
   7
   8 . Download ISO from Download http://www.proxmox.com
   9 +
  10 NOTE: There is one ISO image for download covering all versions and
  11 features.
  12
  13 . Burn the downloaded ISO image to a CD or create a
  14 xref:create_bootable_usb[bootable USB stick].
  15
  16 . Boot from this CD/USB stick on your dedicated hardware - see xref:system_requirements[System requirements].
  17
  18 . Follow the instructions on the graphical screen.
  19 +
  20 CAUTION: All existing data on your hard disk will be lost!
  21
  22 . After reboot, go to your desktop PC and point your browser to the
  23 given IP address.
  24
  25 . Login and upload subscription key.
  26
  27 . Check the IP configuration and hostname.
  28
  29 . Check and save the Time Zone.
  30
  31 . Check your xref:firewall_settings[Firewall settings].
  32
  33 . Configure {pmg} to forward the incoming SMTP traffic to your Mail
  34 server ('Configuration/Mail Proxy/Default Relay') - 'Default
  35 Relay' is your e-mail server.
  36
  37 . Configure your e-mail server to send all outgoing messages through
  38 your {pmg} ('Smart Host', port 26 by default) - see
  39 xref:fitering_outgoing_mail[Filtering outgoing e-mails].
  40
  41 For detailed deployment scenarios see the "{pmg} Deployment Guide".
  42
  43 If the installation succeeds you have to route all your incoming and
  44 outgoing e-mail traffic to the Mail Gateway. For incoming traffic you
  45 have to configure your firewall and/or DNS settings. For outgoing
  46 traffic you need to change the existing e-mail server configuration.
  47