]> git.proxmox.com Git - qemu.git/blob - qemu-timer.h
target-arm: Set Invalid flag for NaN in float-to-int conversions
[qemu.git] / qemu-timer.h
1 #ifndef QEMU_TIMER_H
2 #define QEMU_TIMER_H
3
4 #include "qemu-common.h"
5 #include <time.h>
6 #include <sys/time.h>
7
8 #ifdef _WIN32
9 #include <windows.h>
10 #include <mmsystem.h>
11 #endif
12
13 /* timers */
14
15 #define SCALE_MS 1000000
16 #define SCALE_US 1000
17 #define SCALE_NS 1
18
19 typedef struct QEMUClock QEMUClock;
20 typedef void QEMUTimerCB(void *opaque);
21
22 /* The real time clock should be used only for stuff which does not
23 change the virtual machine state, as it is run even if the virtual
24 machine is stopped. The real time clock has a frequency of 1000
25 Hz. */
26 extern QEMUClock *rt_clock;
27
28 /* The virtual clock is only run during the emulation. It is stopped
29 when the virtual machine is stopped. Virtual timers use a high
30 precision clock, usually cpu cycles (use ticks_per_sec). */
31 extern QEMUClock *vm_clock;
32
33 /* The host clock should be use for device models that emulate accurate
34 real time sources. It will continue to run when the virtual machine
35 is suspended, and it will reflect system time changes the host may
36 undergo (e.g. due to NTP). The host clock has the same precision as
37 the virtual clock. */
38 extern QEMUClock *host_clock;
39
40 int64_t qemu_get_clock_ns(QEMUClock *clock);
41 void qemu_clock_enable(QEMUClock *clock, int enabled);
42 void qemu_clock_warp(QEMUClock *clock);
43
44 QEMUTimer *qemu_new_timer(QEMUClock *clock, int scale,
45 QEMUTimerCB *cb, void *opaque);
46 void qemu_free_timer(QEMUTimer *ts);
47 void qemu_del_timer(QEMUTimer *ts);
48 void qemu_mod_timer(QEMUTimer *ts, int64_t expire_time);
49 int qemu_timer_pending(QEMUTimer *ts);
50 int qemu_timer_expired(QEMUTimer *timer_head, int64_t current_time);
51
52 void qemu_run_all_timers(void);
53 int qemu_alarm_pending(void);
54 int64_t qemu_next_icount_deadline(void);
55 void configure_alarms(char const *opt);
56 void configure_icount(const char *option);
57 int qemu_calculate_timeout(void);
58 void init_clocks(void);
59 int init_timer_alarm(void);
60 void quit_timers(void);
61
62 int64_t cpu_get_ticks(void);
63 void cpu_enable_ticks(void);
64 void cpu_disable_ticks(void);
65
66 static inline QEMUTimer *qemu_new_timer_ns(QEMUClock *clock, QEMUTimerCB *cb,
67 void *opaque)
68 {
69 return qemu_new_timer(clock, SCALE_NS, cb, opaque);
70 }
71
72 static inline QEMUTimer *qemu_new_timer_ms(QEMUClock *clock, QEMUTimerCB *cb,
73 void *opaque)
74 {
75 return qemu_new_timer(clock, SCALE_MS, cb, opaque);
76 }
77
78 static inline int64_t qemu_get_clock_ms(QEMUClock *clock)
79 {
80 return qemu_get_clock_ns(clock) / SCALE_MS;
81 }
82
83 static inline int64_t get_ticks_per_sec(void)
84 {
85 return 1000000000LL;
86 }
87
88 /* real time host monotonic timer */
89 static inline int64_t get_clock_realtime(void)
90 {
91 struct timeval tv;
92
93 gettimeofday(&tv, NULL);
94 return tv.tv_sec * 1000000000LL + (tv.tv_usec * 1000);
95 }
96
97 /* Warning: don't insert tracepoints into these functions, they are
98 also used by simpletrace backend and tracepoints would cause
99 an infinite recursion! */
100 #ifdef _WIN32
101 extern int64_t clock_freq;
102
103 static inline int64_t get_clock(void)
104 {
105 LARGE_INTEGER ti;
106 QueryPerformanceCounter(&ti);
107 return muldiv64(ti.QuadPart, get_ticks_per_sec(), clock_freq);
108 }
109
110 #else
111
112 extern int use_rt_clock;
113
114 static inline int64_t get_clock(void)
115 {
116 #if defined(__linux__) || (defined(__FreeBSD__) && __FreeBSD_version >= 500000) \
117 || defined(__DragonFly__) || defined(__FreeBSD_kernel__)
118 if (use_rt_clock) {
119 struct timespec ts;
120 clock_gettime(CLOCK_MONOTONIC, &ts);
121 return ts.tv_sec * 1000000000LL + ts.tv_nsec;
122 } else
123 #endif
124 {
125 /* XXX: using gettimeofday leads to problems if the date
126 changes, so it should be avoided. */
127 return get_clock_realtime();
128 }
129 }
130 #endif
131
132 void qemu_get_timer(QEMUFile *f, QEMUTimer *ts);
133 void qemu_put_timer(QEMUFile *f, QEMUTimer *ts);
134
135 /* ptimer.c */
136 typedef struct ptimer_state ptimer_state;
137 typedef void (*ptimer_cb)(void *opaque);
138
139 ptimer_state *ptimer_init(QEMUBH *bh);
140 void ptimer_set_period(ptimer_state *s, int64_t period);
141 void ptimer_set_freq(ptimer_state *s, uint32_t freq);
142 void ptimer_set_limit(ptimer_state *s, uint64_t limit, int reload);
143 uint64_t ptimer_get_count(ptimer_state *s);
144 void ptimer_set_count(ptimer_state *s, uint64_t count);
145 void ptimer_run(ptimer_state *s, int oneshot);
146 void ptimer_stop(ptimer_state *s);
147 void qemu_put_ptimer(QEMUFile *f, ptimer_state *s);
148 void qemu_get_ptimer(QEMUFile *f, ptimer_state *s);
149
150 /* icount */
151 int64_t qemu_icount_round(int64_t count);
152 extern int64_t qemu_icount;
153 extern int use_icount;
154 extern int icount_time_shift;
155 extern int64_t qemu_icount_bias;
156 int64_t cpu_get_icount(void);
157
158 /*******************************************/
159 /* host CPU ticks (if available) */
160
161 #if defined(_ARCH_PPC)
162
163 static inline int64_t cpu_get_real_ticks(void)
164 {
165 int64_t retval;
166 #ifdef _ARCH_PPC64
167 /* This reads timebase in one 64bit go and includes Cell workaround from:
168 http://ozlabs.org/pipermail/linuxppc-dev/2006-October/027052.html
169 */
170 __asm__ __volatile__ ("mftb %0\n\t"
171 "cmpwi %0,0\n\t"
172 "beq- $-8"
173 : "=r" (retval));
174 #else
175 /* http://ozlabs.org/pipermail/linuxppc-dev/1999-October/003889.html */
176 unsigned long junk;
177 __asm__ __volatile__ ("mfspr %1,269\n\t" /* mftbu */
178 "mfspr %L0,268\n\t" /* mftb */
179 "mfspr %0,269\n\t" /* mftbu */
180 "cmpw %0,%1\n\t"
181 "bne $-16"
182 : "=r" (retval), "=r" (junk));
183 #endif
184 return retval;
185 }
186
187 #elif defined(__i386__)
188
189 static inline int64_t cpu_get_real_ticks(void)
190 {
191 int64_t val;
192 asm volatile ("rdtsc" : "=A" (val));
193 return val;
194 }
195
196 #elif defined(__x86_64__)
197
198 static inline int64_t cpu_get_real_ticks(void)
199 {
200 uint32_t low,high;
201 int64_t val;
202 asm volatile("rdtsc" : "=a" (low), "=d" (high));
203 val = high;
204 val <<= 32;
205 val |= low;
206 return val;
207 }
208
209 #elif defined(__hppa__)
210
211 static inline int64_t cpu_get_real_ticks(void)
212 {
213 int val;
214 asm volatile ("mfctl %%cr16, %0" : "=r"(val));
215 return val;
216 }
217
218 #elif defined(__ia64)
219
220 static inline int64_t cpu_get_real_ticks(void)
221 {
222 int64_t val;
223 asm volatile ("mov %0 = ar.itc" : "=r"(val) :: "memory");
224 return val;
225 }
226
227 #elif defined(__s390__)
228
229 static inline int64_t cpu_get_real_ticks(void)
230 {
231 int64_t val;
232 asm volatile("stck 0(%1)" : "=m" (val) : "a" (&val) : "cc");
233 return val;
234 }
235
236 #elif defined(__sparc_v8plus__) || defined(__sparc_v8plusa__) || defined(__sparc_v9__)
237
238 static inline int64_t cpu_get_real_ticks (void)
239 {
240 #if defined(_LP64)
241 uint64_t rval;
242 asm volatile("rd %%tick,%0" : "=r"(rval));
243 return rval;
244 #else
245 union {
246 uint64_t i64;
247 struct {
248 uint32_t high;
249 uint32_t low;
250 } i32;
251 } rval;
252 asm volatile("rd %%tick,%1; srlx %1,32,%0"
253 : "=r"(rval.i32.high), "=r"(rval.i32.low));
254 return rval.i64;
255 #endif
256 }
257
258 #elif defined(__mips__) && \
259 ((defined(__mips_isa_rev) && __mips_isa_rev >= 2) || defined(__linux__))
260 /*
261 * binutils wants to use rdhwr only on mips32r2
262 * but as linux kernel emulate it, it's fine
263 * to use it.
264 *
265 */
266 #define MIPS_RDHWR(rd, value) { \
267 __asm__ __volatile__ (".set push\n\t" \
268 ".set mips32r2\n\t" \
269 "rdhwr %0, "rd"\n\t" \
270 ".set pop" \
271 : "=r" (value)); \
272 }
273
274 static inline int64_t cpu_get_real_ticks(void)
275 {
276 /* On kernels >= 2.6.25 rdhwr <reg>, $2 and $3 are emulated */
277 uint32_t count;
278 static uint32_t cyc_per_count = 0;
279
280 if (!cyc_per_count) {
281 MIPS_RDHWR("$3", cyc_per_count);
282 }
283
284 MIPS_RDHWR("$2", count);
285 return (int64_t)(count * cyc_per_count);
286 }
287
288 #elif defined(__alpha__)
289
290 static inline int64_t cpu_get_real_ticks(void)
291 {
292 uint64_t cc;
293 uint32_t cur, ofs;
294
295 asm volatile("rpcc %0" : "=r"(cc));
296 cur = cc;
297 ofs = cc >> 32;
298 return cur - ofs;
299 }
300
301 #else
302 /* The host CPU doesn't have an easily accessible cycle counter.
303 Just return a monotonically increasing value. This will be
304 totally wrong, but hopefully better than nothing. */
305 static inline int64_t cpu_get_real_ticks (void)
306 {
307 static int64_t ticks = 0;
308 return ticks++;
309 }
310 #endif
311
312 #ifdef NEED_CPU_H
313 /* Deterministic execution requires that IO only be performed on the last
314 instruction of a TB so that interrupts take effect immediately. */
315 static inline int can_do_io(CPUState *env)
316 {
317 if (!use_icount)
318 return 1;
319
320 /* If not executing code then assume we are ok. */
321 if (!env->current_tb)
322 return 1;
323
324 return env->can_do_io != 0;
325 }
326 #endif
327
328 #ifdef CONFIG_PROFILER
329 static inline int64_t profile_getclock(void)
330 {
331 return cpu_get_real_ticks();
332 }
333
334 extern int64_t qemu_time, qemu_time_start;
335 extern int64_t tlb_flush_time;
336 extern int64_t dev_time;
337 #endif
338
339 #endif