]> git.proxmox.com Git - mirror_ubuntu-artful-kernel.git/blob - ubuntu/vbox/include/VBox/err.h
UBUNTU: ubuntu: vbox -- Update to 5.1.22-dfsg-1
[mirror_ubuntu-artful-kernel.git] / ubuntu / vbox / include / VBox / err.h
1 /** @file
2 * VirtualBox Status Codes.
3 */
4
5 /*
6 * Copyright (C) 2006-2017 Oracle Corporation
7 *
8 * This file is part of VirtualBox Open Source Edition (OSE), as
9 * available from http://www.virtualbox.org. This file is free software;
10 * you can redistribute it and/or modify it under the terms of the GNU
11 * General Public License (GPL) as published by the Free Software
12 * Foundation, in version 2 as it comes in the "COPYING" file of the
13 * VirtualBox OSE distribution. VirtualBox OSE is distributed in the
14 * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
15 *
16 * The contents of this file may alternatively be used under the terms
17 * of the Common Development and Distribution License Version 1.0
18 * (CDDL) only, as it comes in the "COPYING.CDDL" file of the
19 * VirtualBox OSE distribution, in which case the provisions of the
20 * CDDL are applicable instead of those of the GPL.
21 *
22 * You may elect to license modified versions of this file under the
23 * terms and conditions of either the GPL or the CDDL or both.
24 */
25
26 #ifndef ___VBox_err_h
27 #define ___VBox_err_h
28
29 #include <VBox/cdefs.h>
30 #include <iprt/err.h>
31
32
33 /** @defgroup grp_err VBox Error Codes
34 * @{
35 */
36
37 /* SED-START */
38
39 /** @name Misc. Status Codes
40 * @{
41 */
42 /** Failed to allocate VM memory. */
43 #define VERR_NO_VM_MEMORY (-1000)
44 /** RC is toasted and the VMM should be terminated at once, but no need to
45 * panic about it :-) */
46 #define VERR_DONT_PANIC (-1001)
47 /** Unsupported CPU. */
48 #define VERR_UNSUPPORTED_CPU (-1002)
49 /** Unsupported CPU mode. */
50 #define VERR_UNSUPPORTED_CPU_MODE (-1003)
51 /** Page not present. */
52 #define VERR_PAGE_NOT_PRESENT (-1004)
53 /** Invalid/Corrupted configuration file. */
54 #define VERR_CFG_INVALID_FORMAT (-1005)
55 /** No configuration value exists. */
56 #define VERR_CFG_NO_VALUE (-1006)
57 /** Selector not present. */
58 #define VERR_SELECTOR_NOT_PRESENT (-1007)
59 /** Not code selector. */
60 #define VERR_NOT_CODE_SELECTOR (-1008)
61 /** Not data selector. */
62 #define VERR_NOT_DATA_SELECTOR (-1009)
63 /** Out of selector bounds. */
64 #define VERR_OUT_OF_SELECTOR_BOUNDS (-1010)
65 /** Invalid selector. Usually beyond table limits. */
66 #define VERR_INVALID_SELECTOR (-1011)
67 /** Invalid requested privilege level. */
68 #define VERR_INVALID_RPL (-1012)
69 /** PML4 entry not present. */
70 #define VERR_PAGE_MAP_LEVEL4_NOT_PRESENT (-1013)
71 /** Page directory pointer not present. */
72 #define VERR_PAGE_DIRECTORY_PTR_NOT_PRESENT (-1014)
73 /** Raw mode doesn't support SMP. */
74 #define VERR_RAW_MODE_INVALID_SMP (-1015)
75 /** Invalid VM handle. */
76 #define VERR_INVALID_VM_HANDLE (-1016)
77 /** Invalid VM handle. */
78 #define VERR_INVALID_VMCPU_HANDLE (-1017)
79 /** Invalid Virtual CPU ID. */
80 #define VERR_INVALID_CPU_ID (-1018)
81 /** Too many VCPUs. */
82 #define VERR_TOO_MANY_CPUS (-1019)
83 /** The service was disabled on the host.
84 * Returned by pfnInit in VBoxService to indicated a non-fatal error that
85 * should results in the particular service being disabled. */
86 #define VERR_SERVICE_DISABLED (-1020)
87 /** The requested feature is not supported in raw-mode. */
88 #define VERR_NOT_SUP_IN_RAW_MODE (-1021)
89 /** Invalid CPU index. */
90 #define VERR_INVALID_CPU_INDEX (-1022)
91 /** This VirtualBox build does not support raw-mode. */
92 #define VERR_RAW_MODE_NOT_SUPPORTED (-1023)
93 /** @} */
94
95
96 /** @name Execution Monitor/Manager (EM) Status Codes
97 *
98 * The order of the status codes between VINF_EM_FIRST and VINF_EM_LAST
99 * are of vital importance. The lower the number the higher importance
100 * as a scheduling instruction.
101 * @{
102 */
103 /** First scheduling related status code. */
104 #define VINF_EM_FIRST 1100
105 /** Indicating that the VM is being terminated and that the execution
106 * shall stop. */
107 #define VINF_EM_TERMINATE 1100
108 /** Hypervisor code was stepped.
109 * EM will first send this to the debugger, and if the issue isn't
110 * resolved there it will enter guru meditation. */
111 #define VINF_EM_DBG_HYPER_STEPPED 1101
112 /** Hit a breakpoint in the hypervisor code,
113 * EM will first send this to the debugger, and if the issue isn't
114 * resolved there it will enter guru meditation. */
115 #define VINF_EM_DBG_HYPER_BREAKPOINT 1102
116 /** Hit a possible assertion in the hypervisor code,
117 * EM will first send this to the debugger, and if the issue isn't
118 * resolved there it will enter guru meditation. */
119 #define VINF_EM_DBG_HYPER_ASSERTION 1103
120 /** Generic debug event, suspend the VM for debugging. */
121 #define VINF_EM_DBG_EVENT 1104
122 /** Indicating that the VM should be suspended for debugging because
123 * the developer wants to inspect the VM state. */
124 #define VINF_EM_DBG_STOP 1105
125 /** Indicating success single stepping and that EM should report that
126 * event to the debugger. */
127 #define VINF_EM_DBG_STEPPED 1106
128 /** Indicating that a breakpoint was hit and that EM should notify the debugger
129 * and in the event there is no debugger fail fatally. */
130 #define VINF_EM_DBG_BREAKPOINT 1107
131 /** Indicating that EM should single step an instruction.
132 * The instruction is stepped in the current execution mode (RAW/REM). */
133 #define VINF_EM_DBG_STEP 1108
134 /** Indicating that the VM is being turned off and that the EM should
135 * exit to the VM awaiting the destruction request. */
136 #define VINF_EM_OFF 1109
137 /** Indicating that the VM has been suspended and that the thread
138 * should wait for request telling it what to do next. */
139 #define VINF_EM_SUSPEND 1110
140 /** Indicating that the VM has been reset and that scheduling goes
141 * back to startup defaults. */
142 #define VINF_EM_RESET 1111
143 /** Indicating that the VM has executed a halt instruction and that
144 * the emulation thread should wait for an interrupt before resuming
145 * execution. */
146 #define VINF_EM_HALT 1112
147 /** Indicating that the VM has been resumed and that the thread should
148 * start executing. */
149 #define VINF_EM_RESUME 1113
150 /** Indicating that we've got an out-of-memory condition and that we need
151 * to take the appropriate actions to deal with this.
152 * @remarks It might seem odd at first that this has lower priority than VINF_EM_HALT,
153 * VINF_EM_SUSPEND, and VINF_EM_RESUME. The reason is that these events are
154 * vital to correctly operating the VM. Also, they can't normally occur together
155 * with an out-of-memory condition, and even if that should happen the condition
156 * will be rediscovered before executing any more code. */
157 #define VINF_EM_NO_MEMORY 1114
158 /** The fatal variant of VINF_EM_NO_MEMORY. */
159 #define VERR_EM_NO_MEMORY (-1114)
160 /** Indicating that a rescheduling to recompiled execution.
161 * Typically caused by raw-mode executing code which is difficult/slow
162 * to virtualize rawly.
163 * @remarks Important to have a higher priority (lower number) than the other rescheduling status codes. */
164 #define VINF_EM_RESCHEDULE_REM 1115
165 /** Indicating that a rescheduling to vmx-mode execution.
166 * Typically caused by REM detecting that hardware-accelerated raw-mode execution is possible. */
167 #define VINF_EM_RESCHEDULE_HM 1116
168 /** Indicating that a rescheduling to raw-mode execution.
169 * Typically caused by REM detecting that raw-mode execution is possible.
170 * @remarks Important to have a higher priority (lower number) than VINF_EM_RESCHEDULE. */
171 #define VINF_EM_RESCHEDULE_RAW 1117
172 /** Indicating that a rescheduling now is required. Typically caused by
173 * interrupts having changed the EIP. */
174 #define VINF_EM_RESCHEDULE 1118
175 /** PARAV call */
176 #define VINF_EM_RESCHEDULE_PARAV 1119
177 /** Go back into wait for SIPI mode */
178 #define VINF_EM_WAIT_SIPI 1120
179 /** Last scheduling related status code. (inclusive) */
180 #define VINF_EM_LAST 1120
181
182 /** Reason for leaving RC: Guest trap which couldn't be handled in RC.
183 * The trap is generally forwarded to the REM and executed there. */
184 #define VINF_EM_RAW_GUEST_TRAP 1121
185 /** Reason for leaving RC: Interrupted by external interrupt.
186 * The interrupt needed to be handled by the host OS. */
187 #define VINF_EM_RAW_INTERRUPT 1122
188 /** Reason for leaving RC: Interrupted by external interrupt while in hypervisor
189 * code. The interrupt needed to be handled by the host OS and hypervisor
190 * execution must be resumed. VM state is not complete at this point. */
191 #define VINF_EM_RAW_INTERRUPT_HYPER 1123
192 /** Reason for leaving RC: A Ring switch was attempted.
193 * Normal cause of action is to execute this in REM. */
194 #define VINF_EM_RAW_RING_SWITCH 1124
195 /** Reason for leaving RC: A Ring switch was attempted using software interrupt.
196 * Normal cause of action is to execute this in REM. */
197 #define VINF_EM_RAW_RING_SWITCH_INT 1125
198 /** Reason for leaving RC: A privileged instruction was attempted executed.
199 * Normal cause of action is to execute this in REM. */
200 #define VINF_EM_RAW_EXCEPTION_PRIVILEGED 1126
201
202 /** Reason for leaving RZ: Emulate instruction. */
203 #define VINF_EM_RAW_EMULATE_INSTR 1127
204 /** Reason for leaving RC: Unhandled TSS write.
205 * Recompiler gets control. */
206 #define VINF_EM_RAW_EMULATE_INSTR_TSS_FAULT 1128
207 /** Reason for leaving RC: Unhandled LDT write.
208 * Recompiler gets control. */
209 #define VINF_EM_RAW_EMULATE_INSTR_LDT_FAULT 1129
210 /** Reason for leaving RC: Unhandled IDT write.
211 * Recompiler gets control. */
212 #define VINF_EM_RAW_EMULATE_INSTR_IDT_FAULT 1130
213 /** Reason for leaving RC: Partly handled GDT write.
214 * Recompiler gets control. */
215 #define VINF_EM_RAW_EMULATE_INSTR_GDT_FAULT 1131
216 /** Reason for leaving RC: jump inside generated patch jump.
217 * Fatal error. */
218 #define VERR_EM_RAW_PATCH_CONFLICT (-1133)
219 /** Reason for leaving RZ: Ring-3 operation pending. */
220 #define VINF_EM_RAW_TO_R3 1135
221 /** Reason for leaving RZ: Timer pending. */
222 #define VINF_EM_RAW_TIMER_PENDING 1136
223 /** Reason for leaving RC: Interrupt pending (guest). */
224 #define VINF_EM_RAW_INTERRUPT_PENDING 1137
225 /** Reason for leaving RC: Encountered a stale selector. */
226 #define VINF_EM_RAW_STALE_SELECTOR 1138
227 /** Reason for leaving RC: The IRET resuming guest code trapped. */
228 #define VINF_EM_RAW_IRET_TRAP 1139
229 /** Reason for leaving RC: Emulate (MM)IO intensive code in the recompiler. */
230 #define VINF_EM_RAW_EMULATE_IO_BLOCK 1140
231 /** The interpreter was unable to deal with the instruction at hand. */
232 #define VERR_EM_INTERPRETER (-1148)
233 /** Internal EM error caused by an unknown warning or informational status code. */
234 #define VERR_EM_INTERNAL_ERROR (-1149)
235 /** Pending VM request packet. */
236 #define VINF_EM_PENDING_REQUEST 1150
237 /** Start instruction stepping (debug only). */
238 #define VINF_EM_RAW_EMULATE_DBG_STEP 1151
239 /** Patch TPR access instruction. */
240 #define VINF_EM_HM_PATCH_TPR_INSTR 1152
241 /** Unexpected guest mapping conflict detected. */
242 #define VERR_EM_UNEXPECTED_MAPPING_CONFLICT (-1154)
243 /** Reason for leaving RC: A triple-fault condition. Currently, causes
244 * a guru meditation. */
245 #define VINF_EM_TRIPLE_FAULT 1155
246 /** The specified execution engine cannot execute guest code in the current
247 * state. */
248 #define VERR_EM_CANNOT_EXEC_GUEST (-1156)
249 /** Reason for leaving RC: Inject a TRPM event. */
250 #define VINF_EM_RAW_INJECT_TRPM_EVENT 1157
251 /** Guest tried to trigger a CPU hang. The guest is probably up to no good. */
252 #define VERR_EM_GUEST_CPU_HANG (-1158)
253 /** @} */
254
255
256 /** @name Debugging Facility (DBGF) DBGF Status Codes
257 * @{
258 */
259 /** The function called requires the caller to be attached as a
260 * debugger to the VM. */
261 #define VERR_DBGF_NOT_ATTACHED (-1200)
262 /** Someone (including the caller) was already attached as
263 * debugger to the VM. */
264 #define VERR_DBGF_ALREADY_ATTACHED (-1201)
265 /** Tried to halt a debugger which was already halted.
266 * (This is a warning and not an error.) */
267 #define VWRN_DBGF_ALREADY_HALTED 1202
268 /** The DBGF has no more free breakpoint slots. */
269 #define VERR_DBGF_NO_MORE_BP_SLOTS (-1203)
270 /** The DBGF couldn't find the specified breakpoint. */
271 #define VERR_DBGF_BP_NOT_FOUND (-1204)
272 /** Attempted to enabled a breakpoint which was already enabled. */
273 #define VINF_DBGF_BP_ALREADY_ENABLED 1205
274 /** Attempted to disabled a breakpoint which was already disabled. */
275 #define VINF_DBGF_BP_ALREADY_DISABLED 1206
276 /** The breakpoint already exists. */
277 #define VINF_DBGF_BP_ALREADY_EXIST 1207
278 /** The byte string was not found. */
279 #define VERR_DBGF_MEM_NOT_FOUND (-1208)
280 /** The OS was not detected. */
281 #define VERR_DBGF_OS_NOT_DETCTED (-1209)
282 /** The OS was not detected. */
283 #define VINF_DBGF_OS_NOT_DETCTED 1209
284 /** The specified register was not found. */
285 #define VERR_DBGF_REGISTER_NOT_FOUND (-1210)
286 /** The value was truncated to fit.
287 * For queries this means that the register is wider than the queried value.
288 * For setters this means that the value is wider than the register. */
289 #define VINF_DBGF_TRUNCATED_REGISTER 1211
290 /** The value was zero extended to fit.
291 * For queries this means that the register is narrower than the queried value.
292 * For setters this means that the value is narrower than the register. */
293 #define VINF_DBGF_ZERO_EXTENDED_REGISTER 1212
294 /** The requested type conversion was not supported. */
295 #define VERR_DBGF_UNSUPPORTED_CAST (-1213)
296 /** The register is read-only and cannot be modified. */
297 #define VERR_DBGF_READ_ONLY_REGISTER (-1214)
298 /** Internal processing error \#1 in the DBGF register code. */
299 #define VERR_DBGF_REG_IPE_1 (-1215)
300 /** Internal processing error \#2 in the DBGF register code. */
301 #define VERR_DBGF_REG_IPE_2 (-1216)
302 /** Unhandled \#DB in hypervisor code. */
303 #define VERR_DBGF_HYPER_DB_XCPT (-1217)
304 /** Internal processing error \#1 in the DBGF stack code. */
305 #define VERR_DBGF_STACK_IPE_1 (-1218)
306 /** Internal processing error \#2 in the DBGF stack code. */
307 #define VERR_DBGF_STACK_IPE_2 (-1219)
308 /** No trace buffer available, please change the VM config. */
309 #define VERR_DBGF_NO_TRACE_BUFFER (-1220)
310 /** @} */
311
312
313 /** @name Patch Manager (PATM) Status Codes
314 * @{
315 */
316 /** Non fatal Patch Manager analysis phase warning */
317 #define VWRN_CONTINUE_ANALYSIS 1400
318 /** Non fatal Patch Manager recompile phase warning (mapped to VWRN_CONTINUE_ANALYSIS). */
319 #define VWRN_CONTINUE_RECOMPILE VWRN_CONTINUE_ANALYSIS
320 /** Continue search (mapped to VWRN_CONTINUE_ANALYSIS). */
321 #define VWRN_PATM_CONTINUE_SEARCH VWRN_CONTINUE_ANALYSIS
322 /** Patch installation refused (patch too complex or unsupported instructions ) */
323 #define VERR_PATCHING_REFUSED (-1401)
324 /** Unable to find patch */
325 #define VERR_PATCH_NOT_FOUND (-1402)
326 /** Patch disabled */
327 #define VERR_PATCH_DISABLED (-1403)
328 /** Patch enabled */
329 #define VWRN_PATCH_ENABLED 1404
330 /** Patch was already disabled */
331 #define VERR_PATCH_ALREADY_DISABLED (-1405)
332 /** Patch was already enabled */
333 #define VERR_PATCH_ALREADY_ENABLED (-1406)
334 /** Patch was removed. */
335 #define VWRN_PATCH_REMOVED 1407
336
337 /** Reason for leaving RC: \#GP with EIP pointing to patch code. */
338 #define VINF_PATM_PATCH_TRAP_GP 1408
339 /** First leave RC code. */
340 #define VINF_PATM_LEAVE_RC_FIRST VINF_PATM_PATCH_TRAP_GP
341 /** Reason for leaving RC: \#PF with EIP pointing to patch code. */
342 #define VINF_PATM_PATCH_TRAP_PF 1409
343 /** Reason for leaving RC: int3 with EIP pointing to patch code. */
344 #define VINF_PATM_PATCH_INT3 1410
345 /** Reason for leaving RC: \#PF for monitored patch page. */
346 #define VINF_PATM_CHECK_PATCH_PAGE 1411
347 /** Reason for leaving RC: duplicate instruction called at current eip. */
348 #define VINF_PATM_DUPLICATE_FUNCTION 1412
349 /** Execute one instruction with the recompiler */
350 #define VINF_PATCH_EMULATE_INSTR 1413
351 /** Reason for leaving RC: attempt to patch MMIO write. */
352 #define VINF_PATM_HC_MMIO_PATCH_WRITE 1414
353 /** Reason for leaving RC: attempt to patch MMIO read. */
354 #define VINF_PATM_HC_MMIO_PATCH_READ 1415
355 /** Reason for leaving RC: pending irq after iret that sets IF. */
356 #define VINF_PATM_PENDING_IRQ_AFTER_IRET 1416
357 /** Last leave RC code. */
358 #define VINF_PATM_LEAVE_RC_LAST VINF_PATM_PENDING_IRQ_AFTER_IRET
359
360 /** No conflicts to resolve */
361 #define VERR_PATCH_NO_CONFLICT (-1425)
362 /** Detected unsafe code for patching */
363 #define VERR_PATM_UNSAFE_CODE (-1426)
364 /** Terminate search branch */
365 #define VWRN_PATCH_END_BRANCH 1427
366 /** Already patched */
367 #define VERR_PATM_ALREADY_PATCHED (-1428)
368 /** Spinlock detection failed. */
369 #define VINF_PATM_SPINLOCK_FAILED (1429)
370 /** Continue execution after patch trap. */
371 #define VINF_PATCH_CONTINUE (1430)
372 /** The patch manager is not used because we're using HM and VT-x/AMD-V. */
373 #define VERR_PATM_HM_IPE (-1431)
374 /** Unexpected trap in patch code. */
375 #define VERR_PATM_IPE_TRAP_IN_PATCH_CODE (-1432)
376
377 /** @} */
378
379
380 /** @name Code Scanning and Analysis Manager (CSAM) Status Codes
381 * @{
382 */
383 /** Trap not handled */
384 #define VWRN_CSAM_TRAP_NOT_HANDLED 1500
385 /** Patch installed */
386 #define VWRN_CSAM_INSTRUCTION_PATCHED 1501
387 /** Page record not found */
388 #define VWRN_CSAM_PAGE_NOT_FOUND 1502
389 /** Reason for leaving RC: CSAM wants perform a task in ring-3. */
390 #define VINF_CSAM_PENDING_ACTION 1503
391 /** The CSAM is not used because we're using HM and VT-x/AMD-V. */
392 #define VERR_CSAM_HM_IPE (-1504)
393 /** @} */
394
395
396 /** @name Page Monitor/Manager (PGM) Status Codes
397 * @{
398 */
399 /** Attempt to create a GC mapping which conflicts with an existing mapping. */
400 #define VERR_PGM_MAPPING_CONFLICT (-1600)
401 /** The physical handler range has no corresponding RAM range.
402 * If this is MMIO, see todo above the return. If not MMIO, then it's
403 * someone else's fault... */
404 #define VERR_PGM_HANDLER_PHYSICAL_NO_RAM_RANGE (-1601)
405 /** Attempt to register an access handler for a virtual range of which a part
406 * was already handled. */
407 #define VERR_PGM_HANDLER_VIRTUAL_CONFLICT (-1602)
408 /** Attempt to register an access handler for a physical range of which a part
409 * was already handled. */
410 #define VERR_PGM_HANDLER_PHYSICAL_CONFLICT (-1603)
411 /** Invalid page directory specified to PGM. */
412 #define VERR_PGM_INVALID_PAGE_DIRECTORY (-1604)
413 /** Invalid GC physical address. */
414 #define VERR_PGM_INVALID_GC_PHYSICAL_ADDRESS (-1605)
415 /** Invalid GC physical range. Usually used when a specified range crosses
416 * a RAM region boundary. */
417 #define VERR_PGM_INVALID_GC_PHYSICAL_RANGE (-1606)
418 /** Specified access handler was not found. */
419 #define VERR_PGM_HANDLER_NOT_FOUND (-1607)
420 /** Attempt to register a RAM range of which parts are already
421 * covered by existing RAM ranges. */
422 #define VERR_PGM_RAM_CONFLICT (-1608)
423 /** Failed to add new mappings because the current mappings are fixed
424 * in guest os memory. */
425 #define VERR_PGM_MAPPINGS_FIXED (-1609)
426 /** Failed to fix mappings because of a conflict with the intermediate code. */
427 #define VERR_PGM_MAPPINGS_FIX_CONFLICT (-1610)
428 /** Failed to fix mappings because a mapping rejected the address. */
429 #define VERR_PGM_MAPPINGS_FIX_REJECTED (-1611)
430 /** Failed to fix mappings because the proposed memory area was to small. */
431 #define VERR_PGM_MAPPINGS_FIX_TOO_SMALL (-1612)
432 /** Reason for leaving RZ: The urge to syncing CR3. */
433 #define VINF_PGM_SYNC_CR3 1613
434 /** Page not marked for dirty bit tracking */
435 #define VINF_PGM_NO_DIRTY_BIT_TRACKING 1614
436 /** Page fault caused by dirty bit tracking; corrected */
437 #define VINF_PGM_HANDLED_DIRTY_BIT_FAULT 1615
438 /** Go ahead with the default Read/Write operation.
439 * This is returned by a R3 physical or virtual handler when it wants the
440 * PGMPhys[Read|Write] routine do the reading/writing. */
441 #define VINF_PGM_HANDLER_DO_DEFAULT 1616
442 /** The paging mode of the host is not supported yet. */
443 #define VERR_PGM_UNSUPPORTED_HOST_PAGING_MODE (-1617)
444 /** The physical guest page is a reserved/MMIO page and does not have any HC
445 * address. */
446 #define VERR_PGM_PHYS_PAGE_RESERVED (-1618)
447 /** No page directory available for the hypervisor. */
448 #define VERR_PGM_NO_HYPERVISOR_ADDRESS (-1619)
449 /** The shadow page pool was flushed.
450 * This means that a global CR3 sync was flagged. Anyone receiving this kind of status
451 * will have to get down to a SyncCR3 ASAP. See also VINF_PGM_SYNC_CR3. */
452 #define VERR_PGM_POOL_FLUSHED (-1620)
453 /** The shadow page pool was cleared.
454 * This is a error code internal to the shadow page pool, it will be
455 * converted to a VERR_PGM_POOL_FLUSHED before leaving the pool code. */
456 #define VERR_PGM_POOL_CLEARED (-1621)
457 /** The returned shadow page is cached. */
458 #define VINF_PGM_CACHED_PAGE 1622
459 /** Returned by handler registration, modification and deregistration
460 * when the shadow PTs could be updated because the guest page
461 * aliased or/and mapped by multiple PTs. */
462 #define VINF_PGM_GCPHYS_ALIASED 1623
463 /** Reason for leaving RC: Paging mode changed.
464 * PGMChangeMode() uses this to force a switch to R3 so it can safely deal with
465 * a mode switch. */
466 #define VINF_PGM_CHANGE_MODE 1624
467 /** SyncPage modified the PDE.
468 * This is an internal status code used to communicate back to the \#PF handler
469 * that the PDE was (probably) marked not-present and it should restart the instruction. */
470 #define VINF_PGM_SYNCPAGE_MODIFIED_PDE 1625
471 /** Physical range crosses dynamic ram chunk boundary; translation to HC ptr not safe. */
472 #define VERR_PGM_GCPHYS_RANGE_CROSSES_BOUNDARY (-1626)
473 /** Conflict between the core memory and the intermediate paging context, try again.
474 * There are some very special conditions applying to the intermediate paging context
475 * (used during the world switches), and some times we continuously run into these
476 * when asking the host kernel for memory during VM init. Let us know if you run into
477 * this and we'll adjust the code so it tries harder to avoid it.
478 */
479 #define VERR_PGM_INTERMEDIATE_PAGING_CONFLICT (-1627)
480 /** The shadow paging mode is not supported yet. */
481 #define VERR_PGM_UNSUPPORTED_SHADOW_PAGING_MODE (-1628)
482 /** The dynamic mapping cache for physical memory failed. */
483 #define VERR_PGM_DYNMAP_FAILED (-1629)
484 /** The auto usage cache for the dynamic mapping set is full. */
485 #define VERR_PGM_DYNMAP_FULL_SET (-1630)
486 /** The initialization of the dynamic mapping cache failed. */
487 #define VERR_PGM_DYNMAP_SETUP_ERROR (-1631)
488 /** The expanding of the dynamic mapping cache failed. */
489 #define VERR_PGM_DYNMAP_EXPAND_ERROR (-1632)
490 /** The page is unassigned (akin to VERR_PGM_INVALID_GC_PHYSICAL_ADDRESS). */
491 #define VERR_PGM_PHYS_TLB_UNASSIGNED (-1633)
492 /** Catch any access and route it thru PGM. */
493 #define VERR_PGM_PHYS_TLB_CATCH_ALL (-1634)
494 /** Catch write access and route it thru PGM. */
495 #define VINF_PGM_PHYS_TLB_CATCH_WRITE 1635
496 /** Catch write access and route it thru PGM. */
497 #define VERR_PGM_PHYS_TLB_CATCH_WRITE (-1635)
498 /** No CR3 root shadow page table. */
499 #define VERR_PGM_NO_CR3_SHADOW_ROOT (-1636)
500 /** Trying to free a page with an invalid Page ID. */
501 #define VERR_PGM_PHYS_INVALID_PAGE_ID (-1637)
502 /** PGMPhysWrite/Read hit a handler in Ring-0 or raw-mode context. */
503 #define VERR_PGM_PHYS_WR_HIT_HANDLER (-1638)
504 /** Trying to free a page that isn't RAM. */
505 #define VERR_PGM_PHYS_NOT_RAM (-1639)
506 /** Not ROM page. */
507 #define VERR_PGM_PHYS_NOT_ROM (-1640)
508 /** Not MMIO page. */
509 #define VERR_PGM_PHYS_NOT_MMIO (-1641)
510 /** Not MMIO2 page. */
511 #define VERR_PGM_PHYS_NOT_MMIO2 (-1642)
512 /** Already aliased to a different page. */
513 #define VERR_PGM_HANDLER_ALREADY_ALIASED (-1643)
514 /** Already aliased to the same page. */
515 #define VINF_PGM_HANDLER_ALREADY_ALIASED (1643)
516 /** PGM pool flush pending - return to ring 3. */
517 #define VINF_PGM_POOL_FLUSH_PENDING (1644)
518 /** Unable to use the range for a large page. */
519 #define VERR_PGM_INVALID_LARGE_PAGE_RANGE (-1645)
520 /** Don't mess around with ballooned pages. */
521 #define VERR_PGM_PHYS_PAGE_BALLOONED (-1646)
522 /** Internal processing error \#1 in page access handler code. */
523 #define VERR_PGM_HANDLER_IPE_1 (-1647)
524
525
526 /** pgmPhysPageMapCommon encountered PGMPAGETYPE_MMIO2_ALIAS_MMIO. */
527 #define VERR_PGM_MAP_MMIO2_ALIAS_MMIO (-1651)
528 /** Guest mappings are disabled. */
529 #define VERR_PGM_MAPPINGS_DISABLED (-1652)
530 /** No guest mappings when SMP is enabled. */
531 #define VERR_PGM_MAPPINGS_SMP (-1653)
532 /** Invalid saved page state. */
533 #define VERR_PGM_INVALID_SAVED_PAGE_STATE (-1654)
534 /** Encountered an unexpected page type in the saved state. */
535 #define VERR_PGM_LOAD_UNEXPECTED_PAGE_TYPE (-1655)
536 /** Encountered an unexpected page state in the saved state. */
537 #define VERR_PGM_UNEXPECTED_PAGE_STATE (-1656)
538 /** Couldn't find MMIO2 range from saved state. */
539 #define VERR_PGM_SAVED_MMIO2_RANGE_NOT_FOUND (-1657)
540 /** Couldn't find MMIO2 page from saved state. */
541 #define VERR_PGM_SAVED_MMIO2_PAGE_NOT_FOUND (-1658)
542 /** Couldn't find ROM range from saved state. */
543 #define VERR_PGM_SAVED_ROM_RANGE_NOT_FOUND (-1659)
544 /** Couldn't find ROM page from saved state. */
545 #define VERR_PGM_SAVED_ROM_PAGE_NOT_FOUND (-1660)
546 /** ROM page mismatch between saved state and the VM. */
547 #define VERR_PGM_SAVED_ROM_PAGE_PROT (-1661)
548 /** Unknown saved state record. */
549 #define VERR_PGM_SAVED_REC_TYPE (-1662)
550 /** Internal processing error in the PGM dynmap (r0/rc). */
551 #define VERR_PGM_DYNMAP_IPE (-1663)
552 /** Internal processing error in the PGM handy page allocator. */
553 #define VERR_PGM_HANDY_PAGE_IPE (-1664)
554 /** Failed to map the guest PML4. */
555 #define VERR_PGM_PML4_MAPPING (-1665)
556 /** Failed to obtain a pool page. */
557 #define VERR_PGM_POOL_GET_PAGE_FAILED (-1666)
558 /** A PGM function was called in a mode where it isn't supposed to be used. */
559 #define VERR_PGM_NOT_USED_IN_MODE (-1667)
560 /** The CR3 address specified memory we don't know about. */
561 #define VERR_PGM_INVALID_CR3_ADDR (-1668)
562 /** One or the PDPEs specified memory we don't know about. */
563 #define VERR_PGM_INVALID_PDPE_ADDR (-1669)
564 /** Internal processing error in the PGM physical handler code. */
565 #define VERR_PGM_PHYS_HANDLER_IPE (-1670)
566 /** Internal processing error \#1 in the PGM physial page mapping code. */
567 #define VERR_PGM_PHYS_PAGE_MAP_IPE_1 (-1671)
568 /** Internal processing error \#2 in the PGM physial page mapping code. */
569 #define VERR_PGM_PHYS_PAGE_MAP_IPE_2 (-1672)
570 /** Internal processing error \#3 in the PGM physial page mapping code. */
571 #define VERR_PGM_PHYS_PAGE_MAP_IPE_3 (-1673)
572 /** Internal processing error \#4 in the PGM physial page mapping code. */
573 #define VERR_PGM_PHYS_PAGE_MAP_IPE_4 (-1674)
574 /** Too many loops looking for a page to reuse. */
575 #define VERR_PGM_POOL_TOO_MANY_LOOPS (-1675)
576 /** Internal processing error related to guest mappings. */
577 #define VERR_PGM_MAPPING_IPE (-1676)
578 /** An attempt was made to grow an already maxed out page pool. */
579 #define VERR_PGM_POOL_MAXED_OUT_ALREADY (-1677)
580 /** Internal processing error in the page pool code. */
581 #define VERR_PGM_POOL_IPE (-1678)
582 /** The write monitor is already engaged. */
583 #define VERR_PGM_WRITE_MONITOR_ENGAGED (-1679)
584 /** Failed to get a guest page which is expected to be present. */
585 #define VERR_PGM_PHYS_PAGE_GET_IPE (-1680)
586 /** We were given a NULL pPage parameter. */
587 #define VERR_PGM_PHYS_NULL_PAGE_PARAM (-1681)
588 /** PCI passthru is not supported by this build. */
589 #define VERR_PGM_PCI_PASSTHRU_MISCONFIG (-1682)
590 /** Too many MMIO2 ranges. */
591 #define VERR_PGM_TOO_MANY_MMIO2_RANGES (-1683)
592 /** Internal processing error in the PGM physical page mapping code dealing
593 * with MMIO2 pages. */
594 #define VERR_PGM_PHYS_PAGE_MAP_MMIO2_IPE (-1684)
595 /** Internal processing error in the PGM physcal page handling code related to
596 * MMIO/MMIO2. */
597 #define VERR_PGM_PHYS_MMIO_EX_IPE (-1685)
598 /** @} */
599
600
601 /** @name Memory Monitor (MM) Status Codes
602 * @{
603 */
604 /** Attempt to register a RAM range of which parts are already
605 * covered by existing RAM ranges. */
606 #define VERR_MM_RAM_CONFLICT (-1700)
607 /** Hypervisor memory allocation failed. */
608 #define VERR_MM_HYPER_NO_MEMORY (-1701)
609 /** A bad trap type ended up in mmGCRamTrap0eHandler. */
610 #define VERR_MM_BAD_TRAP_TYPE_IPE (-1702)
611 /** @} */
612
613
614 /** @name CPU Monitor (CPUM) Status Codes
615 * @{
616 */
617 /** The caller shall raise an \#GP(0) exception. */
618 #define VERR_CPUM_RAISE_GP_0 (-1750)
619 /** Incompatible CPUM configuration. */
620 #define VERR_CPUM_INCOMPATIBLE_CONFIG (-1751)
621 /** CPUMR3DisasmInstrCPU unexpectedly failed to determine the hidden
622 * parts of the CS register. */
623 #define VERR_CPUM_HIDDEN_CS_LOAD_ERROR (-1752)
624 /** Couldn't find the end of CPUID sub-leaves. */
625 #define VERR_CPUM_TOO_MANY_CPUID_SUBLEAVES (-1753)
626 /** CPUM internal processing error \#1. */
627 #define VERR_CPUM_IPE_1 (-1754)
628 /** CPUM internal processing error \#2. */
629 #define VERR_CPUM_IPE_2 (-1755)
630 /** The specified CPU cannot be found in the CPU database. */
631 #define VERR_CPUM_DB_CPU_NOT_FOUND (-1756)
632 /** Invalid CPUMCPU offset in MSR range. */
633 #define VERR_CPUM_MSR_BAD_CPUMCPU_OFFSET (-1757)
634 /** Return to ring-3 to read the MSR there. */
635 #define VINF_CPUM_R3_MSR_READ (1758)
636 /** Return to ring-3 to write the MSR there. */
637 #define VINF_CPUM_R3_MSR_WRITE (1759)
638 /** Too many CPUID leaves. */
639 #define VERR_TOO_MANY_CPUID_LEAVES (-1760)
640 /** Invalid config value. */
641 #define VERR_CPUM_INVALID_CONFIG_VALUE (-1761)
642 /** The loaded XSAVE component mask is not compatible with the host CPU
643 * or/and VM config. */
644 #define VERR_CPUM_INCOMPATIBLE_XSAVE_COMP_MASK (-1762)
645 /** The loaded XSAVE component mask is not valid. */
646 #define VERR_CPUM_INVALID_XSAVE_COMP_MASK (-1763)
647 /** The loaded XSAVE header is not valid. */
648 #define VERR_CPUM_INVALID_XSAVE_HDR (-1764)
649 /** The loaded XCR0 register value is not valid. */
650 #define VERR_CPUM_INVALID_XCR0 (-1765)
651 /** Indicates that we modified the host CR0 (FPU related). */
652 #define VINF_CPUM_HOST_CR0_MODIFIED (1766)
653 /** @} */
654
655
656 /** @name Save State Manager (SSM) Status Codes
657 * @{
658 */
659 /** The specified data unit already exist. */
660 #define VERR_SSM_UNIT_EXISTS (-1800)
661 /** The specified data unit wasn't found. */
662 #define VERR_SSM_UNIT_NOT_FOUND (-1801)
663 /** The specified data unit wasn't owned by caller. */
664 #define VERR_SSM_UNIT_NOT_OWNER (-1802)
665
666 /** General saved state file integrity error. */
667 #define VERR_SSM_INTEGRITY (-1810)
668 /** The saved state file magic was not recognized. */
669 #define VERR_SSM_INTEGRITY_MAGIC (-1811)
670 /** The saved state file version is not supported. */
671 #define VERR_SSM_INTEGRITY_VERSION (-1812)
672 /** The saved state file size didn't match the one in the header. */
673 #define VERR_SSM_INTEGRITY_SIZE (-1813)
674 /** The CRC of the saved state file did not match. */
675 #define VERR_SSM_INTEGRITY_CRC (-1814)
676 /** The machine uuid field wasn't null. */
677 #define VERR_SMM_INTEGRITY_MACHINE (-1815)
678 /** Saved state header integrity error. */
679 #define VERR_SSM_INTEGRITY_HEADER (-1816)
680 /** Unit header integrity error. */
681 #define VERR_SSM_INTEGRITY_UNIT (-1817)
682 /** Invalid unit magic (internal data tag). */
683 #define VERR_SSM_INTEGRITY_UNIT_MAGIC (-1818)
684 /** The file contained a data unit which no-one wants. */
685 #define VERR_SSM_INTEGRITY_UNIT_NOT_FOUND (-1819)
686 /** Incorrect version numbers in the header. */
687 #define VERR_SSM_INTEGRITY_VBOX_VERSION (-1820)
688 /** Footer integrity error. */
689 #define VERR_SSM_INTEGRITY_FOOTER (-1821)
690 /** Record header integrity error. */
691 #define VERR_SSM_INTEGRITY_REC_HDR (-1822)
692 /** Termination record integrity error. */
693 #define VERR_SSM_INTEGRITY_REC_TERM (-1823)
694 /** Termination record CRC mismatch. */
695 #define VERR_SSM_INTEGRITY_REC_TERM_CRC (-1824)
696 /** Decompression integrity error. */
697 #define VERR_SSM_INTEGRITY_DECOMPRESSION (-1825)
698 /** Saved state directory wintertides error. */
699 #define VERR_SSM_INTEGRITY_DIR (-1826)
700 /** The saved state directory magic is wrong. */
701 #define VERR_SSM_INTEGRITY_DIR_MAGIC (-1827)
702
703 /** A data unit in the saved state file was defined but didn't any
704 * routine for processing it. */
705 #define VERR_SSM_NO_LOAD_EXEC (-1830)
706 /** A restore routine attempted to load more data then the unit contained. */
707 #define VERR_SSM_LOADED_TOO_MUCH (-1831)
708 /** Not in the correct state for the attempted operation. */
709 #define VERR_SSM_INVALID_STATE (-1832)
710 /** Not in the correct state for the attempted operation. */
711 #define VERR_SSM_LOADED_TOO_LITTLE (-1833)
712
713 /** Unsupported data unit version.
714 * A SSM user returns this if it doesn't know the u32Version. */
715 #define VERR_SSM_UNSUPPORTED_DATA_UNIT_VERSION (-1840)
716 /** The format of a data unit has changed.
717 * A SSM user returns this if it's not able to read the format for
718 * other reasons than u32Version. */
719 #define VERR_SSM_DATA_UNIT_FORMAT_CHANGED (-1841)
720 /** The CPUID instruction returns different information when loading than when saved.
721 * Normally caused by hardware changes on the host, but could also be caused by
722 * changes in the BIOS setup. */
723 #define VERR_SSM_LOAD_CPUID_MISMATCH (-1842)
724 /** The RAM size differs between the saved state and the VM config. */
725 #define VERR_SSM_LOAD_MEMORY_SIZE_MISMATCH (-1843)
726 /** The state doesn't match the VM configuration in one or another way.
727 * (There are certain PCI reconfiguration which the OS could potentially
728 * do which can cause this problem. Check this out when it happens.) */
729 #define VERR_SSM_LOAD_CONFIG_MISMATCH (-1844)
730 /** The virtual clock frequency differs too much.
731 * The clock source for the virtual time isn't reliable or the code have changed. */
732 #define VERR_SSM_VIRTUAL_CLOCK_HZ (-1845)
733 /** A timeout occurred while waiting for async IDE operations to finish. */
734 #define VERR_SSM_IDE_ASYNC_TIMEOUT (-1846)
735 /** One of the structure magics was wrong. */
736 #define VERR_SSM_STRUCTURE_MAGIC (-1847)
737 /** The data in the saved state doesn't conform to expectations. */
738 #define VERR_SSM_UNEXPECTED_DATA (-1848)
739 /** Trying to read a 64-bit guest physical address into a 32-bit variable. */
740 #define VERR_SSM_GCPHYS_OVERFLOW (-1849)
741 /** Trying to read a 64-bit guest virtual address into a 32-bit variable. */
742 #define VERR_SSM_GCPTR_OVERFLOW (-1850)
743 /** Vote for another pass. */
744 #define VINF_SSM_VOTE_FOR_ANOTHER_PASS 1851
745 /** Vote for done tell SSM not to call again until the final pass. */
746 #define VINF_SSM_VOTE_DONE_DONT_CALL_AGAIN 1852
747 /** Vote for giving up. */
748 #define VERR_SSM_VOTE_FOR_GIVING_UP (-1853)
749 /** Don't call again until the final pass. */
750 #define VINF_SSM_DONT_CALL_AGAIN 1854
751 /** Giving up a live snapshot/teleportation attempt because of too many
752 * passes. */
753 #define VERR_SSM_TOO_MANY_PASSES (-1855)
754 /** Giving up a live snapshot/teleportation attempt because the state grew to
755 * big. */
756 #define VERR_SSM_STATE_GREW_TOO_BIG (-1856)
757 /** Giving up a live snapshot attempt because we're low on disk space. */
758 #define VERR_SSM_LOW_ON_DISK_SPACE (-1857)
759 /** The operation was cancelled. */
760 #define VERR_SSM_CANCELLED (-1858)
761 /** Nothing that can be cancelled. */
762 #define VERR_SSM_NO_PENDING_OPERATION (-1859)
763 /** The operation has already been cancelled. */
764 #define VERR_SSM_ALREADY_CANCELLED (-1860)
765 /** The machine was powered off while saving. */
766 #define VERR_SSM_LIVE_POWERED_OFF (-1861)
767 /** The live snapshot/teleportation operation was aborted because of a guru
768 * meditation. */
769 #define VERR_SSM_LIVE_GURU_MEDITATION (-1862)
770 /** The live snapshot/teleportation operation was aborted because of a fatal
771 * runtime error. */
772 #define VERR_SSM_LIVE_FATAL_ERROR (-1863)
773 /** The VM was suspended before or while saving, don't resume execution. */
774 #define VINF_SSM_LIVE_SUSPENDED 1864
775 /** Complex SSM field fed to SSMR3PutStruct or SSMR3GetStruct. Use the
776 * extended API. */
777 #define VERR_SSM_FIELD_COMPLEX (-1864)
778 /** Invalid size of a SSM field with the specified transformation. */
779 #define VERR_SSM_FIELD_INVALID_SIZE (-1865)
780 /** The specified field is outside the structure. */
781 #define VERR_SSM_FIELD_OUT_OF_BOUNDS (-1866)
782 /** The field does not follow immediately the previous one. */
783 #define VERR_SSM_FIELD_NOT_CONSECUTIVE (-1867)
784 /** The field contains an invalid callback or transformation index. */
785 #define VERR_SSM_FIELD_INVALID_CALLBACK (-1868)
786 /** The field contains an invalid padding size. */
787 #define VERR_SSM_FIELD_INVALID_PADDING_SIZE (-1869)
788 /** The field contains a value that is out of range. */
789 #define VERR_SSM_FIELD_INVALID_VALUE (-1870)
790 /** Generic stream error. */
791 #define VERR_SSM_STREAM_ERROR (-1871)
792 /** SSM did a callback for a pass we didn't expect. */
793 #define VERR_SSM_UNEXPECTED_PASS (-1872)
794 /** Someone is trying to skip backwards in the stream... */
795 #define VERR_SSM_SKIP_BACKWARDS (-1873)
796 /** Someone is trying to write a memory block which is too big to encode. */
797 #define VERR_SSM_MEM_TOO_BIG (-1874)
798 /** Encountered an bad (/unknown) record type. */
799 #define VERR_SSM_BAD_REC_TYPE (-1875)
800 /** Internal processing error \#1 in SSM code. */
801 #define VERR_SSM_IPE_1 (-1876)
802 /** Internal processing error \#2 in SSM code. */
803 #define VERR_SSM_IPE_2 (-1877)
804 /** Internal processing error \#3 in SSM code. */
805 #define VERR_SSM_IPE_3 (-1878)
806 /** A field contained an transformation that should only be used when loading
807 * old states. */
808 #define VERR_SSM_FIELD_LOAD_ONLY_TRANSFORMATION (-1879)
809 /** @} */
810
811
812 /** @name Virtual Machine (VM) Status Codes
813 * @{
814 */
815 /** The specified at reset handler wasn't found. */
816 #define VERR_VM_ATRESET_NOT_FOUND (-1900)
817 /** Invalid VM request type.
818 * For the VMR3ReqAlloc() case, the caller just specified an illegal enmType. For
819 * all the other occurrences it means indicates corruption, broken logic, or stupid
820 * interface user. */
821 #define VERR_VM_REQUEST_INVALID_TYPE (-1901)
822 /** Invalid VM request state.
823 * The state of the request packet was not the expected and accepted one(s). Either
824 * the interface user screwed up, or we've got corruption/broken logic. */
825 #define VERR_VM_REQUEST_STATE (-1902)
826 /** Invalid VM request packet.
827 * One or more of the VM controlled packet members didn't contain the correct
828 * values. Some thing's broken. */
829 #define VERR_VM_REQUEST_INVALID_PACKAGE (-1903)
830 /** The status field has not been updated yet as the request is still
831 * pending completion. Someone queried the iStatus field before the request
832 * has been fully processed. */
833 #define VERR_VM_REQUEST_STATUS_STILL_PENDING (-1904)
834 /** The request has been freed, don't read the status now.
835 * Someone is reading the iStatus field of a freed request packet. */
836 #define VERR_VM_REQUEST_STATUS_FREED (-1905)
837 /** A VM api requiring EMT was called from another thread.
838 * Use the VMR3ReqCall() apis to call it! */
839 #define VERR_VM_THREAD_NOT_EMT (-1906)
840 /** The VM state was invalid for the requested operation.
841 * Go check the 'VM Statechart Diagram.gif'. */
842 #define VERR_VM_INVALID_VM_STATE (-1907)
843 /** The support driver is not installed.
844 * On linux, open returned ENOENT. */
845 #define VERR_VM_DRIVER_NOT_INSTALLED (-1908)
846 /** The support driver is not accessible.
847 * On linux, open returned EPERM. */
848 #define VERR_VM_DRIVER_NOT_ACCESSIBLE (-1909)
849 /** Was not able to load the support driver.
850 * On linux, open returned ENODEV. */
851 #define VERR_VM_DRIVER_LOAD_ERROR (-1910)
852 /** Was not able to open the support driver.
853 * Generic open error used when none of the other ones fit. */
854 #define VERR_VM_DRIVER_OPEN_ERROR (-1911)
855 /** The installed support driver doesn't match the version of the user. */
856 #define VERR_VM_DRIVER_VERSION_MISMATCH (-1912)
857 /** Saving the VM state is temporarily not allowed. Try again later. */
858 #define VERR_VM_SAVE_STATE_NOT_ALLOWED (-1913)
859 /** An EMT called an API which cannot be called on such a thread. */
860 #define VERR_VM_THREAD_IS_EMT (-1914)
861 /** Encountered an unexpected VM state. */
862 #define VERR_VM_UNEXPECTED_VM_STATE (-1915)
863 /** Unexpected unstable VM state. */
864 #define VERR_VM_UNEXPECTED_UNSTABLE_STATE (-1916)
865 /** Too many arguments passed to a VM request / request corruption. */
866 #define VERR_VM_REQUEST_TOO_MANY_ARGS_IPE (-1917)
867 /** Fatal EMT wait error. */
868 #define VERR_VM_FATAL_WAIT_ERROR (-1918)
869 /** The VM request was killed at VM termination. */
870 #define VERR_VM_REQUEST_KILLED (-1919)
871 /** @} */
872
873
874 /** @name VBox Remote Desktop Protocol (VRDP) Status Codes
875 * @{
876 */
877 /** Successful completion of operation (mapped to generic iprt status code). */
878 #define VINF_VRDP_SUCCESS VINF_SUCCESS
879 /** VRDP transport operation timed out (mapped to generic iprt status code). */
880 #define VERR_VRDP_TIMEOUT VERR_TIMEOUT
881
882 /** Unsupported ISO protocol feature */
883 #define VERR_VRDP_ISO_UNSUPPORTED (-2000)
884 /** Security (en/decryption) engine error */
885 #define VERR_VRDP_SEC_ENGINE_FAIL (-2001)
886 /** VRDP protocol violation */
887 #define VERR_VRDP_PROTOCOL_ERROR (-2002)
888 /** Unsupported VRDP protocol feature */
889 #define VERR_VRDP_NOT_SUPPORTED (-2003)
890 /** VRDP protocol violation, client sends less data than expected */
891 #define VERR_VRDP_INSUFFICIENT_DATA (-2004)
892 /** Internal error, VRDP packet is in wrong operation mode */
893 #define VERR_VRDP_INVALID_MODE (-2005)
894 /** Memory allocation failed */
895 #define VERR_VRDP_NO_MEMORY (-2006)
896 /** Client has been rejected */
897 #define VERR_VRDP_ACCESS_DENIED (-2007)
898 /** VRPD receives a packet that is not supported */
899 #define VWRN_VRDP_PDU_NOT_SUPPORTED 2008
900 /** VRDP script allowed the packet to be processed further */
901 #define VINF_VRDP_PROCESS_PDU 2009
902 /** VRDP script has completed its task */
903 #define VINF_VRDP_OPERATION_COMPLETED 2010
904 /** VRDP thread has started OK and will run */
905 #define VINF_VRDP_THREAD_STARTED 2011
906 /** Framebuffer is resized, terminate send bitmap procedure */
907 #define VINF_VRDP_RESIZE_REQUESTED 2012
908 /** Output can be enabled for the client. */
909 #define VINF_VRDP_OUTPUT_ENABLE 2013
910 /** @} */
911
912
913 /** @name Configuration Manager (CFGM) Status Codes
914 * @{
915 */
916 /** The integer value was too big for the requested representation. */
917 #define VERR_CFGM_INTEGER_TOO_BIG (-2100)
918 /** Child node was not found. */
919 #define VERR_CFGM_CHILD_NOT_FOUND (-2101)
920 /** Path to child node was invalid (i.e. empty). */
921 #define VERR_CFGM_INVALID_CHILD_PATH (-2102)
922 /** Value not found. */
923 #define VERR_CFGM_VALUE_NOT_FOUND (-2103)
924 /** No parent node specified. */
925 #define VERR_CFGM_NO_PARENT (-2104)
926 /** No node was specified. */
927 #define VERR_CFGM_NO_NODE (-2105)
928 /** The value is not an integer. */
929 #define VERR_CFGM_NOT_INTEGER (-2106)
930 /** The value is not a zero terminated character string. */
931 #define VERR_CFGM_NOT_STRING (-2107)
932 /** The value is not a byte string. */
933 #define VERR_CFGM_NOT_BYTES (-2108)
934 /** The specified string / bytes buffer was to small. Specify a larger one and retry. */
935 #define VERR_CFGM_NOT_ENOUGH_SPACE (-2109)
936 /** The path of a new node contained slashes or was empty. */
937 #define VERR_CFGM_INVALID_NODE_PATH (-2160)
938 /** A new node couldn't be inserted because one with the same name exists. */
939 #define VERR_CFGM_NODE_EXISTS (-2161)
940 /** A new leaf couldn't be inserted because one with the same name exists. */
941 #define VERR_CFGM_LEAF_EXISTS (-2162)
942 /** An unknown config value was encountered. */
943 #define VERR_CFGM_CONFIG_UNKNOWN_VALUE (-2163)
944 /** An unknown config node (key) was encountered. */
945 #define VERR_CFGM_CONFIG_UNKNOWN_NODE (-2164)
946 /** Internal processing error \#1 in CFGM. */
947 #define VERR_CFGM_IPE_1 (-2165)
948 /** @} */
949
950
951 /** @name Time Manager (TM) Status Codes
952 * @{
953 */
954 /** The loaded timer state was incorrect. */
955 #define VERR_TM_LOAD_STATE (-2200)
956 /** The timer was not in the correct state for the request operation. */
957 #define VERR_TM_INVALID_STATE (-2201)
958 /** The timer was in a unknown state. Corruption or stupid coding error. */
959 #define VERR_TM_UNKNOWN_STATE (-2202)
960 /** The timer was stuck in an unstable state until we grew impatient and returned. */
961 #define VERR_TM_UNSTABLE_STATE (-2203)
962 /** TM requires GIP. */
963 #define VERR_TM_GIP_REQUIRED (-2204)
964 /** TM does not support the GIP version. */
965 #define VERR_TM_GIP_VERSION (-2205)
966 /** The GIP update interval is too large. */
967 #define VERR_TM_GIP_UPDATE_INTERVAL_TOO_BIG (-2206)
968 /** The timer has a bad clock enum value, probably corruption. */
969 #define VERR_TM_TIMER_BAD_CLOCK (-2207)
970 /** The timer failed to reach a stable state. */
971 #define VERR_TM_TIMER_UNSTABLE_STATE (-2208)
972 /** Attempt to resume a running TSC. */
973 #define VERR_TM_TSC_ALREADY_TICKING (-2209)
974 /** Attempt to pause a paused TSC. */
975 #define VERR_TM_TSC_ALREADY_PAUSED (-2210)
976 /** Invalid value for cVirtualTicking. */
977 #define VERR_TM_VIRTUAL_TICKING_IPE (-2211)
978 /** @} */
979
980
981 /** @name Recompiled Execution Manager (REM) Status Codes
982 * @{
983 */
984 /** Fatal error in virtual hardware. */
985 #define VERR_REM_VIRTUAL_HARDWARE_ERROR (-2300)
986 /** Fatal error in the recompiler cpu. */
987 #define VERR_REM_VIRTUAL_CPU_ERROR (-2301)
988 /** Recompiler execution was interrupted by forced action. */
989 #define VINF_REM_INTERRUPED_FF 2302
990 /** Too many similar traps. This is a very useful debug only
991 * check (we don't do double/triple faults in REM). */
992 #define VERR_REM_TOO_MANY_TRAPS (-2304)
993 /** The REM is out of breakpoint slots. */
994 #define VERR_REM_NO_MORE_BP_SLOTS (-2305)
995 /** The REM could not find any breakpoint on the specified address. */
996 #define VERR_REM_BP_NOT_FOUND (-2306)
997 /** @} */
998
999
1000 /** @name Trap Manager / Monitor (TRPM) Status Codes
1001 * @{
1002 */
1003 /** No active trap. Cannot query or reset a non-existing trap. */
1004 #define VERR_TRPM_NO_ACTIVE_TRAP (-2400)
1005 /** Active trap. Cannot assert a new trap when one is already active. */
1006 #define VERR_TRPM_ACTIVE_TRAP (-2401)
1007 /** Reason for leaving RC: Guest tried to write to our IDT - fatal.
1008 * The VM will be terminated assuming the worst, i.e. that the
1009 * guest has read the idtr register. */
1010 #define VERR_TRPM_SHADOW_IDT_WRITE (-2402)
1011 /** Reason for leaving RC: Fatal trap in hypervisor. */
1012 #define VERR_TRPM_DONT_PANIC (-2403)
1013 /** Reason for leaving RC: Double Fault. */
1014 #define VERR_TRPM_PANIC (-2404)
1015 /** The exception was dispatched for raw-mode execution. */
1016 #define VINF_TRPM_XCPT_DISPATCHED 2405
1017 /** Bad TRPM_TRAP_IN_OP. */
1018 #define VERR_TRPM_BAD_TRAP_IN_OP (-2406)
1019 /** Internal processing error \#1 in TRPM. */
1020 #define VERR_TRPM_IPE_1 (-2407)
1021 /** Internal processing error \#2 in TRPM. */
1022 #define VERR_TRPM_IPE_2 (-2408)
1023 /** Internal processing error \#3 in TRPM. */
1024 #define VERR_TRPM_IPE_3 (-2409)
1025 /** Got into a part of TRPM that is not used when HM (VT-x/AMD-V) is enabled. */
1026 #define VERR_TRPM_HM_IPE (-2410)
1027 /** @} */
1028
1029
1030 /** @name Selector Manager / Monitor (SELM) Status Code
1031 * @{
1032 */
1033 /** Reason for leaving RC: Guest tried to write to our GDT - fatal.
1034 * The VM will be terminated assuming the worst, i.e. that the
1035 * guest has read the gdtr register. */
1036 #define VERR_SELM_SHADOW_GDT_WRITE (-2500)
1037 /** Reason for leaving RC: Guest tried to write to our LDT - fatal.
1038 * The VM will be terminated assuming the worst, i.e. that the
1039 * guest has read the ldtr register. */
1040 #define VERR_SELM_SHADOW_LDT_WRITE (-2501)
1041 /** Reason for leaving RC: Guest tried to write to our TSS - fatal.
1042 * The VM will be terminated assuming the worst, i.e. that the
1043 * guest has read the ltr register. */
1044 #define VERR_SELM_SHADOW_TSS_WRITE (-2502)
1045 /** Reason for leaving RC: Sync the GDT table to solve a conflict. */
1046 #define VINF_SELM_SYNC_GDT 2503
1047 /** No valid TSS present. */
1048 #define VERR_SELM_NO_TSS (-2504)
1049 /** Invalid guest LDT selector. */
1050 #define VERR_SELM_INVALID_LDT (-2505)
1051 /** The guest LDT selector is out of bounds. */
1052 #define VERR_SELM_LDT_OUT_OF_BOUNDS (-2506)
1053 /** Unknown error while reading the guest GDT during shadow table updating. */
1054 #define VERR_SELM_GDT_READ_ERROR (-2507)
1055 /** The guest GDT so full that we cannot find free space for our own
1056 * selectors. */
1057 #define VERR_SELM_GDT_TOO_FULL (-2508)
1058 /** Got into a part of SELM that is not used when HM (VT-x/AMD-V) is enabled. */
1059 #define VERR_SELM_HM_IPE (-2509)
1060 /** @} */
1061
1062
1063 /** @name I/O Manager / Monitor (IOM) Status Code
1064 * @{
1065 */
1066 /** The specified I/O port range was invalid.
1067 * It was either empty or it was out of bounds. */
1068 #define VERR_IOM_INVALID_IOPORT_RANGE (-2600)
1069 /** The specified R0 or RC I/O port range didn't have a corresponding R3 range.
1070 * IOMR3IOPortRegisterR3() must be called first. */
1071 #define VERR_IOM_NO_R3_IOPORT_RANGE (-2601)
1072 /** The specified I/O port range intruded on an existing range. There is
1073 * a I/O port conflict between two device, or a device tried to register
1074 * the same range twice. */
1075 #define VERR_IOM_IOPORT_RANGE_CONFLICT (-2602)
1076 /** The I/O port range specified for removal wasn't found or it wasn't contiguous. */
1077 #define VERR_IOM_IOPORT_RANGE_NOT_FOUND (-2603)
1078 /** The specified I/O port range was owned by some other device(s). Both registration
1079 * and deregistration, but in the first case only RC and R0 ranges. */
1080 #define VERR_IOM_NOT_IOPORT_RANGE_OWNER (-2604)
1081
1082 /** The specified MMIO range was invalid.
1083 * It was either empty or it was out of bounds. */
1084 #define VERR_IOM_INVALID_MMIO_RANGE (-2605)
1085 /** The specified R0 or RC MMIO range didn't have a corresponding R3 range.
1086 * IOMR3MMIORegisterR3() must be called first. */
1087 #define VERR_IOM_NO_R3_MMIO_RANGE (-2606)
1088 /** The specified MMIO range was owned by some other device(s). Both registration
1089 * and deregistration, but in the first case only RC and R0 ranges. */
1090 #define VERR_IOM_NOT_MMIO_RANGE_OWNER (-2607)
1091 /** The specified MMIO range intruded on an existing range. There is
1092 * a MMIO conflict between two device, or a device tried to register
1093 * the same range twice. */
1094 #define VERR_IOM_MMIO_RANGE_CONFLICT (-2608)
1095 /** The MMIO range specified for removal was not found. */
1096 #define VERR_IOM_MMIO_RANGE_NOT_FOUND (-2609)
1097 /** The MMIO range specified for removal was invalid. The range didn't match
1098 * quite match a set of existing ranges. It's not possible to remove parts of
1099 * a MMIO range, only one or more full ranges. */
1100 #define VERR_IOM_INCOMPLETE_MMIO_RANGE (-2610)
1101 /** An invalid I/O port size was specified for a read or write operation. */
1102 #define VERR_IOM_INVALID_IOPORT_SIZE (-2611)
1103 /** The MMIO handler was called for a bogus address! Internal error! */
1104 #define VERR_IOM_MMIO_HANDLER_BOGUS_CALL (-2612)
1105 /** The MMIO handler experienced a problem with the disassembler. */
1106 #define VERR_IOM_MMIO_HANDLER_DISASM_ERROR (-2613)
1107 /** The port being read was not present(/unused) and IOM shall return ~0 according to size. */
1108 #define VERR_IOM_IOPORT_UNUSED (-2614)
1109 /** Unused MMIO register read, fill with 00. */
1110 #define VINF_IOM_MMIO_UNUSED_00 2615
1111 /** Unused MMIO register read, fill with FF. */
1112 #define VINF_IOM_MMIO_UNUSED_FF 2616
1113
1114 /** Reason for leaving RZ: I/O port read. */
1115 #define VINF_IOM_R3_IOPORT_READ 2620
1116 /** Reason for leaving RZ: I/O port write. */
1117 #define VINF_IOM_R3_IOPORT_WRITE 2621
1118 /** Reason for leaving RZ: Pending I/O port write. Since there is also
1119 * VMCPU_FF_IOM for this condition, it's ok to drop this status code for
1120 * some other VINF_EM_XXX statuses. */
1121 #define VINF_IOM_R3_IOPORT_COMMIT_WRITE 2622
1122 /** Reason for leaving RZ: MMIO read. */
1123 #define VINF_IOM_R3_MMIO_READ 2623
1124 /** Reason for leaving RZ: MMIO write. */
1125 #define VINF_IOM_R3_MMIO_WRITE 2624
1126 /** Reason for leaving RZ: MMIO read/write. */
1127 #define VINF_IOM_R3_MMIO_READ_WRITE 2625
1128 /** Reason for leaving RZ: Pending MMIO write. Since there is also
1129 * VMCPU_FF_IOM for this condition, it's ok to drop this status code for
1130 * some other VINF_EM_XXX statuses. */
1131 #define VINF_IOM_R3_MMIO_COMMIT_WRITE 2626
1132
1133 /** IOMGCIOPortHandler was given an unexpected opcode. */
1134 #define VERR_IOM_IOPORT_UNKNOWN_OPCODE (-2630)
1135 /** Internal processing error \#1 in the I/O port code. */
1136 #define VERR_IOM_IOPORT_IPE_1 (-2631)
1137 /** Internal processing error \#2 in the I/O port code. */
1138 #define VERR_IOM_IOPORT_IPE_2 (-2632)
1139 /** Internal processing error \#3 in the I/O port code. */
1140 #define VERR_IOM_IOPORT_IPE_3 (-2633)
1141 /** Internal processing error \#1 in the MMIO code. */
1142 #define VERR_IOM_MMIO_IPE_1 (-2634)
1143 /** Internal processing error \#2 in the MMIO code. */
1144 #define VERR_IOM_MMIO_IPE_2 (-2635)
1145 /** Internal processing error \#3 in the MMIO code. */
1146 #define VERR_IOM_MMIO_IPE_3 (-2636)
1147 /** Got into a part of IOM that is not used when HM (VT-x/AMD-V) is enabled. */
1148 #define VERR_IOM_HM_IPE (-2637)
1149 /** Internal processing error while merging status codes. */
1150 #define VERR_IOM_FF_STATUS_IPE (-2638)
1151 /** @} */
1152
1153
1154 /** @name Virtual Machine Monitor (VMM) Status Codes
1155 * @{
1156 */
1157 /** Reason for leaving RZ: Calling host function. */
1158 #define VINF_VMM_CALL_HOST 2700
1159 /** Reason for leaving R0: Hit a ring-0 assertion on EMT. */
1160 #define VERR_VMM_RING0_ASSERTION (-2701)
1161 /** The hyper CR3 differs between PGM and CPUM. */
1162 #define VERR_VMM_HYPER_CR3_MISMATCH (-2702)
1163 /** Reason for leaving RZ: Illegal call to ring-3. */
1164 #define VERR_VMM_RING3_CALL_DISABLED (-2703)
1165 /** The VMMR0.r0 module version does not match VBoxVMM.dll/so/dylib.
1166 * If you just upgraded VirtualBox, please terminate all VMs and make sure
1167 * that neither VBoxNetDHCP nor VBoxNetNAT is running. Then try again.
1168 * If this error persists, try re-installing VirtualBox. */
1169 #define VERR_VMM_R0_VERSION_MISMATCH (-2704)
1170 /** The VMMRC.rc module version does not match VBoxVMM.dll/so/dylib.
1171 * Re-install if you are a user. Developers should make sure the build is
1172 * complete or try with a clean build. */
1173 #define VERR_VMM_RC_VERSION_MISMATCH (-2705)
1174 /** VMM set jump error. */
1175 #define VERR_VMM_SET_JMP_ERROR (-2706)
1176 /** VMM set jump stack overflow error. */
1177 #define VERR_VMM_SET_JMP_STACK_OVERFLOW (-2707)
1178 /** VMM set jump resume error. */
1179 #define VERR_VMM_SET_JMP_ABORTED_RESUME (-2708)
1180 /** VMM long jump error. */
1181 #define VERR_VMM_LONG_JMP_ERROR (-2709)
1182 /** Unknown ring-3 call attempted. */
1183 #define VERR_VMM_UNKNOWN_RING3_CALL (-2710)
1184 /** The ring-3 call didn't set an RC. */
1185 #define VERR_VMM_RING3_CALL_NO_RC (-2711)
1186 /** Reason for leaving RC: Caller the tracer in ring-0. */
1187 #define VINF_VMM_CALL_TRACER (2712)
1188 /** Internal processing error \#1 in the switcher code. */
1189 #define VERR_VMM_SWITCHER_IPE_1 (-2713)
1190 /** Reason for leaving RZ: Unknown call to ring-3. */
1191 #define VINF_VMM_UNKNOWN_RING3_CALL (2714)
1192 /** Attempted to use stub switcher. */
1193 #define VERR_VMM_SWITCHER_STUB (-2715)
1194 /** HM returned in the wrong state. */
1195 #define VERR_VMM_WRONG_HM_VMCPU_STATE (-2716)
1196 /** SMAP enabled, but the AC flag was found to be clear - check the kernel
1197 * log for details. */
1198 #define VERR_VMM_SMAP_BUT_AC_CLEAR (-2717)
1199 /** @} */
1200
1201
1202 /** @name Pluggable Device and Driver Manager (PDM) Status Codes
1203 * @{
1204 */
1205 /** An invalid LUN specification was given. */
1206 #define VERR_PDM_NO_SUCH_LUN (-2800)
1207 /** A device encountered an unknown configuration value.
1208 * This means that the device is potentially misconfigured and the device
1209 * construction or unit attachment failed because of this. */
1210 #define VERR_PDM_DEVINS_UNKNOWN_CFG_VALUES (-2801)
1211 /** The above driver doesn't export a interface required by a driver being
1212 * attached to it. Typical misconfiguration problem. */
1213 #define VERR_PDM_MISSING_INTERFACE_ABOVE (-2802)
1214 /** The below driver doesn't export a interface required by the drive
1215 * having attached it. Typical misconfiguration problem. */
1216 #define VERR_PDM_MISSING_INTERFACE_BELOW (-2803)
1217 /** A device didn't find a required interface with an attached driver.
1218 * Typical misconfiguration problem. */
1219 #define VERR_PDM_MISSING_INTERFACE (-2804)
1220 /** A driver encountered an unknown configuration value.
1221 * This means that the driver is potentially misconfigured and the driver
1222 * construction failed because of this. */
1223 #define VERR_PDM_DRVINS_UNKNOWN_CFG_VALUES (-2805)
1224 /** The PCI bus assigned to a device didn't have room for it.
1225 * Either too many devices are configured on the same PCI bus, or there are
1226 * some internal problem where PDM/PCI doesn't free up slots when unplugging devices. */
1227 #define VERR_PDM_TOO_PCI_MANY_DEVICES (-2806)
1228 /** A queue is out of free items, the queueing operation failed. */
1229 #define VERR_PDM_NO_QUEUE_ITEMS (-2807)
1230 /** Not possible to attach further drivers to the driver.
1231 * A driver which doesn't support attachments (below of course) will
1232 * return this status code if it found that further drivers were configured
1233 * to be attached to it. */
1234 #define VERR_PDM_DRVINS_NO_ATTACH (-2808)
1235 /** Not possible to attach drivers to the device.
1236 * A device which doesn't support attachments (below of course) will
1237 * return this status code if it found that drivers were configured
1238 * to be attached to it. */
1239 #define VERR_PDM_DEVINS_NO_ATTACH (-2809)
1240 /** No attached driver.
1241 * The PDMDRVHLP::pfnAttach and PDMDEVHLP::pfnDriverAttach will return
1242 * this error when no driver was configured to be attached. */
1243 #define VERR_PDM_NO_ATTACHED_DRIVER (-2810)
1244 /** The media geometry hasn't been set yet, so it cannot be obtained.
1245 * The caller should then calculate the geometry from the media size. */
1246 #define VERR_PDM_GEOMETRY_NOT_SET (-2811)
1247 /** The media translation hasn't been set yet, so it cannot be obtained.
1248 * The caller should then guess the translation. */
1249 #define VERR_PDM_TRANSLATION_NOT_SET (-2812)
1250 /** The media is not mounted, operation requires a mounted media. */
1251 #define VERR_PDM_MEDIA_NOT_MOUNTED (-2813)
1252 /** Mount failed because a media was already mounted. Unmount the media
1253 * and retry the mount. */
1254 #define VERR_PDM_MEDIA_MOUNTED (-2814)
1255 /** The media is locked and cannot be unmounted. */
1256 #define VERR_PDM_MEDIA_LOCKED (-2815)
1257 /** No 'Type' attribute in the DrvBlock configuration.
1258 * Misconfiguration. */
1259 #define VERR_PDM_BLOCK_NO_TYPE (-2816)
1260 /** The 'Type' attribute in the DrvBlock configuration had an unknown value.
1261 * Misconfiguration. */
1262 #define VERR_PDM_BLOCK_UNKNOWN_TYPE (-2817)
1263 /** The 'Translation' attribute in the DrvBlock configuration had an unknown value.
1264 * Misconfiguration. */
1265 #define VERR_PDM_BLOCK_UNKNOWN_TRANSLATION (-2818)
1266 /** The block driver type wasn't supported.
1267 * Misconfiguration of the kind you get when attaching a floppy to an IDE controller. */
1268 #define VERR_PDM_UNSUPPORTED_BLOCK_TYPE (-2819)
1269 /** A attach or prepare mount call failed because the driver already
1270 * had a driver attached. */
1271 #define VERR_PDM_DRIVER_ALREADY_ATTACHED (-2820)
1272 /** An attempt on detaching a driver without anyone actually being attached, or
1273 * performing any other operation on an attached driver. */
1274 #define VERR_PDM_NO_DRIVER_ATTACHED (-2821)
1275 /** The attached driver configuration is missing the 'Driver' attribute. */
1276 #define VERR_PDM_CFG_MISSING_DRIVER_NAME (-2822)
1277 /** The configured driver wasn't found.
1278 * Either the necessary driver modules wasn't loaded, the name was
1279 * misspelled, or it was a misconfiguration. */
1280 #define VERR_PDM_DRIVER_NOT_FOUND (-2823)
1281 /** The Ring-3 module was already loaded. */
1282 #define VINF_PDM_ALREADY_LOADED (2824)
1283 /** The name of the module clashed with an existing module. */
1284 #define VERR_PDM_MODULE_NAME_CLASH (-2825)
1285 /** Couldn't find any export for registration of drivers/devices. */
1286 #define VERR_PDM_NO_REGISTRATION_EXPORT (-2826)
1287 /** A module name is too long. */
1288 #define VERR_PDM_MODULE_NAME_TOO_LONG (-2827)
1289 /** Driver name clash. Another driver with the same name as the
1290 * one being registered exists. */
1291 #define VERR_PDM_DRIVER_NAME_CLASH (-2828)
1292 /** The version of the driver registration structure is unknown
1293 * to this VBox version. Either mixing incompatible versions or
1294 * the structure isn't correctly initialized. */
1295 #define VERR_PDM_UNKNOWN_DRVREG_VERSION (-2829)
1296 /** Invalid entry in the driver registration structure. */
1297 #define VERR_PDM_INVALID_DRIVER_REGISTRATION (-2830)
1298 /** Invalid host bit mask. */
1299 #define VERR_PDM_INVALID_DRIVER_HOST_BITS (-2831)
1300 /** Not possible to detach a driver because the above driver/device
1301 * doesn't support it. The above entity doesn't implement the pfnDetach call. */
1302 #define VERR_PDM_DRIVER_DETACH_NOT_POSSIBLE (-2832)
1303 /** No PCI Bus is available to register the device with. This is usually a
1304 * misconfiguration or in rare cases a buggy pci device. */
1305 #define VERR_PDM_NO_PCI_BUS (-2833)
1306 /** The device is not a registered PCI device and thus cannot
1307 * perform any PCI operations. The device forgot to register it self. */
1308 #define VERR_PDM_NOT_PCI_DEVICE (-2834)
1309
1310 /** The version of the device registration structure is unknown
1311 * to this VBox version. Either mixing incompatible versions or
1312 * the structure isn't correctly initialized. */
1313 #define VERR_PDM_UNKNOWN_DEVREG_VERSION (-2835)
1314 /** Invalid entry in the device registration structure. */
1315 #define VERR_PDM_INVALID_DEVICE_REGISTRATION (-2836)
1316 /** Invalid host bit mask. */
1317 #define VERR_PDM_INVALID_DEVICE_GUEST_BITS (-2837)
1318 /** The guest bit mask didn't match the guest being loaded. */
1319 #define VERR_PDM_INVALID_DEVICE_HOST_BITS (-2838)
1320 /** Device name clash. Another device with the same name as the
1321 * one being registered exists. */
1322 #define VERR_PDM_DEVICE_NAME_CLASH (-2839)
1323 /** The device wasn't found. There was no registered device
1324 * by that name. */
1325 #define VERR_PDM_DEVICE_NOT_FOUND (-2840)
1326 /** The device instance was not found. */
1327 #define VERR_PDM_DEVICE_INSTANCE_NOT_FOUND (-2841)
1328 /** The device instance have no base interface. */
1329 #define VERR_PDM_DEVICE_INSTANCE_NO_IBASE (-2842)
1330 /** The device instance have no such logical unit. */
1331 #define VERR_PDM_DEVICE_INSTANCE_LUN_NOT_FOUND (-2843)
1332 /** The driver instance could not be found. */
1333 #define VERR_PDM_DRIVER_INSTANCE_NOT_FOUND (-2844)
1334 /** Logical Unit was not found. */
1335 #define VERR_PDM_LUN_NOT_FOUND (-2845)
1336 /** The Logical Unit was found, but it had no driver attached to it. */
1337 #define VERR_PDM_NO_DRIVER_ATTACHED_TO_LUN (-2846)
1338 /** The Logical Unit was found, but it had no driver attached to it. */
1339 #define VINF_PDM_NO_DRIVER_ATTACHED_TO_LUN 2846
1340 /** No PIC device instance is registered with the current VM and thus
1341 * the PIC operation cannot be performed. */
1342 #define VERR_PDM_NO_PIC_INSTANCE (-2847)
1343 /** No APIC device instance is registered with the current VM and thus
1344 * the APIC operation cannot be performed. */
1345 #define VERR_PDM_NO_APIC_INSTANCE (-2848)
1346 /** No DMAC device instance is registered with the current VM and thus
1347 * the DMA operation cannot be performed. */
1348 #define VERR_PDM_NO_DMAC_INSTANCE (-2849)
1349 /** No RTC device instance is registered with the current VM and thus
1350 * the RTC or CMOS operation cannot be performed. */
1351 #define VERR_PDM_NO_RTC_INSTANCE (-2850)
1352 /** Unable to open the host interface due to a sharing violation . */
1353 #define VERR_PDM_HIF_SHARING_VIOLATION (-2851)
1354 /** Unable to open the host interface. */
1355 #define VERR_PDM_HIF_OPEN_FAILED (-2852)
1356 /** The device doesn't support runtime driver attaching.
1357 * The PDMDEVREG::pfnAttach callback function is NULL. */
1358 #define VERR_PDM_DEVICE_NO_RT_ATTACH (-2853)
1359 /** The driver doesn't support runtime driver attaching.
1360 * The PDMDRVREG::pfnAttach callback function is NULL. */
1361 #define VERR_PDM_DRIVER_NO_RT_ATTACH (-2854)
1362 /** Invalid host interface version. */
1363 #define VERR_PDM_HIF_INVALID_VERSION (-2855)
1364
1365 /** The version of the USB device registration structure is unknown
1366 * to this VBox version. Either mixing incompatible versions or
1367 * the structure isn't correctly initialized. */
1368 #define VERR_PDM_UNKNOWN_USBREG_VERSION (-2856)
1369 /** Invalid entry in the device registration structure. */
1370 #define VERR_PDM_INVALID_USB_REGISTRATION (-2857)
1371 /** Driver name clash. Another driver with the same name as the
1372 * one being registered exists. */
1373 #define VERR_PDM_USB_NAME_CLASH (-2858)
1374 /** The USB hub is already registered. */
1375 #define VERR_PDM_USB_HUB_EXISTS (-2859)
1376 /** Couldn't find any USB hubs to attach the device to. */
1377 #define VERR_PDM_NO_USB_HUBS (-2860)
1378 /** Couldn't find any free USB ports to attach the device to. */
1379 #define VERR_PDM_NO_USB_PORTS (-2861)
1380 /** Couldn't find the USB Proxy device. Using OSE? */
1381 #define VERR_PDM_NO_USBPROXY (-2862)
1382 /** The async completion template is still used. */
1383 #define VERR_PDM_ASYNC_TEMPLATE_BUSY (-2863)
1384 /** The async completion task is already suspended. */
1385 #define VERR_PDM_ASYNC_COMPLETION_ALREADY_SUSPENDED (-2864)
1386 /** The async completion task is not suspended. */
1387 #define VERR_PDM_ASYNC_COMPLETION_NOT_SUSPENDED (-2865)
1388 /** The driver properties were invalid, and as a consequence construction
1389 * failed. Caused my unusable media or similar problems. */
1390 #define VERR_PDM_DRIVER_INVALID_PROPERTIES (-2866)
1391 /** Too many instances of a device. */
1392 #define VERR_PDM_TOO_MANY_DEVICE_INSTANCES (-2867)
1393 /** Too many instances of a driver. */
1394 #define VERR_PDM_TOO_MANY_DRIVER_INSTANCES (-2868)
1395 /** Too many instances of a usb device. */
1396 #define VERR_PDM_TOO_MANY_USB_DEVICE_INSTANCES (-2869)
1397 /** The device instance structure version has changed.
1398 *
1399 * If you have upgraded VirtualBox recently, please make sure you have
1400 * terminated all VMs and upgraded any extension packs. If this error
1401 * persists, try re-installing VirtualBox. */
1402 #define VERR_PDM_DEVINS_VERSION_MISMATCH (-2870)
1403 /** The device helper structure version has changed.
1404 *
1405 * If you have upgraded VirtualBox recently, please make sure you have
1406 * terminated all VMs and upgraded any extension packs. If this error
1407 * persists, try re-installing VirtualBox. */
1408 #define VERR_PDM_DEVHLPR3_VERSION_MISMATCH (-2871)
1409 /** The USB device instance structure version has changed.
1410 *
1411 * If you have upgraded VirtualBox recently, please make sure you have
1412 * terminated all VMs and upgraded any extension packs. If this error
1413 * persists, try re-installing VirtualBox. */
1414 #define VERR_PDM_USBINS_VERSION_MISMATCH (-2872)
1415 /** The USB device helper structure version has changed.
1416 *
1417 * If you have upgraded VirtualBox recently, please make sure you have
1418 * terminated all VMs and upgraded any extension packs. If this error
1419 * persists, try re-installing VirtualBox. */
1420 #define VERR_PDM_USBHLPR3_VERSION_MISMATCH (-2873)
1421 /** The driver instance structure version has changed.
1422 *
1423 * If you have upgraded VirtualBox recently, please make sure you have
1424 * terminated all VMs and upgraded any extension packs. If this error
1425 * persists, try re-installing VirtualBox. */
1426 #define VERR_PDM_DRVINS_VERSION_MISMATCH (-2874)
1427 /** The driver helper structure version has changed.
1428 *
1429 * If you have upgraded VirtualBox recently, please make sure you have
1430 * terminated all VMs and upgraded any extension packs. If this error
1431 * persists, try re-installing VirtualBox. */
1432 #define VERR_PDM_DRVHLPR3_VERSION_MISMATCH (-2875)
1433 /** Generic device structure version mismatch.
1434 *
1435 * If you have upgraded VirtualBox recently, please make sure you have
1436 * terminated all VMs and upgraded any extension packs. If this error
1437 * persists, try re-installing VirtualBox. */
1438 #define VERR_PDM_DEVICE_VERSION_MISMATCH (-2876)
1439 /** Generic USB device structure version mismatch.
1440 *
1441 * If you have upgraded VirtualBox recently, please make sure you have
1442 * terminated all VMs and upgraded any extension packs. If this error
1443 * persists, try re-installing VirtualBox. */
1444 #define VERR_PDM_USBDEV_VERSION_MISMATCH (-2877)
1445 /** Generic driver structure version mismatch.
1446 *
1447 * If you have upgraded VirtualBox recently, please make sure you have
1448 * terminated all VMs and upgraded any extension packs. If this error
1449 * persists, try re-installing VirtualBox. */
1450 #define VERR_PDM_DRIVER_VERSION_MISMATCH (-2878)
1451 /** PDMVMMDevHeapR3ToGCPhys failure. */
1452 #define VERR_PDM_DEV_HEAP_R3_TO_GCPHYS (-2879)
1453 /** A legacy device isn't implementing the HPET notification interface. */
1454 #define VERR_PDM_HPET_LEGACY_NOTIFY_MISSING (-2880)
1455 /** Internal processing error in the critical section code. */
1456 #define VERR_PDM_CRITSECT_IPE (-2881)
1457 /** The critical section being deleted was not found. */
1458 #define VERR_PDM_CRITSECT_NOT_FOUND (-2882)
1459 /** A PDMThread API was called by the wrong thread. */
1460 #define VERR_PDM_THREAD_INVALID_CALLER (-2883)
1461 /** Internal processing error \#1 in the PDM Thread code. */
1462 #define VERR_PDM_THREAD_IPE_1 (-2884)
1463 /** Internal processing error \#2 in the PDM Thread code. */
1464 #define VERR_PDM_THREAD_IPE_2 (-2885)
1465 /** Only one PCI function is supported per PDM device. */
1466 #define VERR_PDM_ONE_PCI_FUNCTION_PER_DEVICE (-2886)
1467 /** Bad PCI configuration. */
1468 #define VERR_PDM_BAD_PCI_CONFIG (-2887)
1469 /** Internal processing error # in the PDM device code. */
1470 #define VERR_PDM_DEV_IPE_1 (-2888)
1471 /** Misconfigured driver chain transformation. */
1472 #define VERR_PDM_MISCONFIGURED_DRV_TRANSFORMATION (-2889)
1473 /** The driver is already removed, not more transformations possible (at
1474 * present). */
1475 #define VERR_PDM_CANNOT_TRANSFORM_REMOVED_DRIVER (-2890)
1476 /** The PCI device isn't configured as a busmaster, physical memory access
1477 * rejected. */
1478 #define VERR_PDM_NOT_PCI_BUS_MASTER (-2891)
1479 /** Got into a part of PDM that is not used when HM (VT-x/AMD-V) is enabled. */
1480 #define VERR_PDM_HM_IPE (-2892)
1481 /** The I/O request was canceled. */
1482 #define VERR_PDM_MEDIAEX_IOREQ_CANCELED (-2893)
1483 /** There is not enough room to store the data. */
1484 #define VERR_PDM_MEDIAEX_IOBUF_OVERFLOW (-2894)
1485 /** There is not enough data to satisfy the request. */
1486 #define VERR_PDM_MEDIAEX_IOBUF_UNDERRUN (-2895)
1487 /** The I/O request ID is already existing. */
1488 #define VERR_PDM_MEDIAEX_IOREQID_CONFLICT (-2896)
1489 /** The I/O request ID was not found. */
1490 #define VERR_PDM_MEDIAEX_IOREQID_NOT_FOUND (-2897)
1491 /** The I/O request is in progress. */
1492 #define VINF_PDM_MEDIAEX_IOREQ_IN_PROGRESS 2898
1493 /** The I/O request is in an invalid state for this operation. */
1494 #define VERR_PDM_MEDIAEX_IOREQ_INVALID_STATE (-2899)
1495 /** @} */
1496
1497
1498 /** @name Host-Guest Communication Manager (HGCM) Status Codes
1499 * @{
1500 */
1501 /** Requested service does not exist. */
1502 #define VERR_HGCM_SERVICE_NOT_FOUND (-2900)
1503 /** Service rejected client connection */
1504 #define VINF_HGCM_CLIENT_REJECTED 2901
1505 /** Command address is invalid. */
1506 #define VERR_HGCM_INVALID_CMD_ADDRESS (-2902)
1507 /** Service will execute the command in background. */
1508 #define VINF_HGCM_ASYNC_EXECUTE 2903
1509 /** HGCM could not perform requested operation because of an internal error. */
1510 #define VERR_HGCM_INTERNAL (-2904)
1511 /** Invalid HGCM client id. */
1512 #define VERR_HGCM_INVALID_CLIENT_ID (-2905)
1513 /** The HGCM is saving state. */
1514 #define VINF_HGCM_SAVE_STATE (2906)
1515 /** Requested service already exists. */
1516 #define VERR_HGCM_SERVICE_EXISTS (-2907)
1517
1518 /** @} */
1519
1520
1521 /** @name Network Address Translation Driver (DrvNAT) Status Codes
1522 * @{
1523 */
1524 /** Failed to find the DNS configured for this machine. */
1525 #define VINF_NAT_DNS 3000
1526 /** Failed to convert the specified Guest IP to a binary IP address.
1527 * Malformed input. */
1528 #define VERR_NAT_REDIR_GUEST_IP (-3001)
1529 /** Failed while setting up a redirector rule.
1530 * There probably is a conflict between the rule and some existing
1531 * service on the computer. */
1532 #define VERR_NAT_REDIR_SETUP (-3002)
1533 /** @} */
1534
1535
1536 /** @name HostIF Driver (DrvTUN) Status Codes
1537 * @{
1538 */
1539 /** The Host Interface Networking init program failed. */
1540 #define VERR_HOSTIF_INIT_FAILED (-3100)
1541 /** The Host Interface Networking device name is too long. */
1542 #define VERR_HOSTIF_DEVICE_NAME_TOO_LONG (-3101)
1543 /** The Host Interface Networking name config IOCTL call failed. */
1544 #define VERR_HOSTIF_IOCTL (-3102)
1545 /** Failed to make the Host Interface Networking handle non-blocking. */
1546 #define VERR_HOSTIF_BLOCKING (-3103)
1547 /** If a Host Interface Networking filehandle was specified it's not allowed to
1548 * have any init or term programs. */
1549 #define VERR_HOSTIF_FD_AND_INIT_TERM (-3104)
1550 /** The Host Interface Networking terminate program failed. */
1551 #define VERR_HOSTIF_TERM_FAILED (-3105)
1552 /** @} */
1553
1554
1555 /** @name VBox HDD Container (VD) Status Codes
1556 * @{
1557 */
1558 /** Invalid image type. */
1559 #define VERR_VD_INVALID_TYPE (-3200)
1560 /** Operation can't be done in current HDD container state. */
1561 #define VERR_VD_INVALID_STATE (-3201)
1562 /** Configuration value not found. */
1563 #define VERR_VD_VALUE_NOT_FOUND (-3202)
1564 /** Virtual HDD is not opened. */
1565 #define VERR_VD_NOT_OPENED (-3203)
1566 /** Requested image is not opened. */
1567 #define VERR_VD_IMAGE_NOT_FOUND (-3204)
1568 /** Image is read-only. */
1569 #define VERR_VD_IMAGE_READ_ONLY (-3205)
1570 /** Geometry hasn't been set. */
1571 #define VERR_VD_GEOMETRY_NOT_SET (-3206)
1572 /** No data for this block in image. */
1573 #define VERR_VD_BLOCK_FREE (-3207)
1574 /** Differencing and parent images can't be used together due to UUID. */
1575 #define VERR_VD_UUID_MISMATCH (-3208)
1576 /** Asynchronous I/O request finished. */
1577 #define VINF_VD_ASYNC_IO_FINISHED 3209
1578 /** Asynchronous I/O is not finished yet. */
1579 #define VERR_VD_ASYNC_IO_IN_PROGRESS (-3210)
1580 /** The image is too small or too large for this format. */
1581 #define VERR_VD_INVALID_SIZE (-3211)
1582 /** Configuration value is unknown. This indicates misconfiguration. */
1583 #define VERR_VD_UNKNOWN_CFG_VALUES (-3212)
1584 /** Interface is unknown. This indicates misconfiguration. */
1585 #define VERR_VD_UNKNOWN_INTERFACE (-3213)
1586 /** The DEK for disk encryption is missing. */
1587 #define VERR_VD_DEK_MISSING (-3214)
1588 /** The provided password to decrypt the DEK was incorrect. */
1589 #define VERR_VD_PASSWORD_INCORRECT (-3215)
1590 /** Generic: Invalid image file header. Use this for plugins. */
1591 #define VERR_VD_GEN_INVALID_HEADER (-3220)
1592 /** VDI: Invalid image file header. */
1593 #define VERR_VD_VDI_INVALID_HEADER (-3230)
1594 /** VDI: Invalid image file header: invalid signature. */
1595 #define VERR_VD_VDI_INVALID_SIGNATURE (-3231)
1596 /** VDI: Invalid image file header: invalid version. */
1597 #define VERR_VD_VDI_UNSUPPORTED_VERSION (-3232)
1598 /** Comment string is too long. */
1599 #define VERR_VD_VDI_COMMENT_TOO_LONG (-3233)
1600 /** VMDK: Invalid image file header. */
1601 #define VERR_VD_VMDK_INVALID_HEADER (-3240)
1602 /** VMDK: Invalid image file header: invalid version. */
1603 #define VERR_VD_VMDK_UNSUPPORTED_VERSION (-3241)
1604 /** VMDK: Image property not found. */
1605 #define VERR_VD_VMDK_VALUE_NOT_FOUND (-3242)
1606 /** VMDK: Operation can't be done in current image state. */
1607 #define VERR_VD_VMDK_INVALID_STATE (-3243)
1608 /** VMDK: Format is invalid/inconsistent. */
1609 #define VERR_VD_VMDK_INVALID_FORMAT (-3244)
1610 /** VMDK: Invalid write position. */
1611 #define VERR_VD_VMDK_INVALID_WRITE (-3245)
1612 /** iSCSI: Invalid header, i.e. dummy for validity check. */
1613 #define VERR_VD_ISCSI_INVALID_HEADER (-3250)
1614 /** iSCSI: Operation can't be done in current image state. */
1615 #define VERR_VD_ISCSI_INVALID_STATE (-3251)
1616 /** iSCSI: Invalid device type (not a disk). */
1617 #define VERR_VD_ISCSI_INVALID_TYPE (-3252)
1618 /** iSCSI: Initiator secret not decrypted */
1619 #define VERR_VD_ISCSI_SECRET_ENCRYPTED (-3253)
1620 /** VHD: Invalid image file header. */
1621 #define VERR_VD_VHD_INVALID_HEADER (-3260)
1622 /** Parallels HDD: Invalid image file header. */
1623 #define VERR_VD_PARALLELS_INVALID_HEADER (-3265)
1624 /** DMG: Invalid image file header. */
1625 #define VERR_VD_DMG_INVALID_HEADER (-3267)
1626 /** Raw: Invalid image file header. */
1627 #define VERR_VD_RAW_INVALID_HEADER (-3270)
1628 /** Raw: Invalid image file type. */
1629 #define VERR_VD_RAW_INVALID_TYPE (-3271)
1630 /** The backend needs more metadata before it can continue. */
1631 #define VERR_VD_NOT_ENOUGH_METADATA (-3272)
1632 /** Halt the current I/O context until further notification from the backend. */
1633 #define VERR_VD_IOCTX_HALT (-3273)
1634 /** The disk has a cache attached already. */
1635 #define VERR_VD_CACHE_ALREADY_EXISTS (-3274)
1636 /** There is no cache attached to the disk. */
1637 #define VERR_VD_CACHE_NOT_FOUND (-3275)
1638 /** The cache is not up to date with the image. */
1639 #define VERR_VD_CACHE_NOT_UP_TO_DATE (-3276)
1640 /** The given range does not meet the required alignment. */
1641 #define VERR_VD_DISCARD_ALIGNMENT_NOT_MET (-3277)
1642 /** The discard operation is not supported for this image. */
1643 #define VERR_VD_DISCARD_NOT_SUPPORTED (-3278)
1644 /** The image is the correct format but is corrupted. */
1645 #define VERR_VD_IMAGE_CORRUPTED (-3279)
1646 /** Repairing the image is not supported. */
1647 #define VERR_VD_IMAGE_REPAIR_NOT_SUPPORTED (-3280)
1648 /** Repairing the image is not possible because the corruption is to severe. */
1649 #define VERR_VD_IMAGE_REPAIR_IMPOSSIBLE (-3281)
1650 /** Reading from the image was not possible because the offset is out of the image range.
1651 * This usually indicates that there is a minor corruption in the image meta data. */
1652 #define VERR_VD_READ_OUT_OF_RANGE (-3282)
1653 /** Block read was marked as free in the image and returned as a zero block. */
1654 #define VINF_VD_NEW_ZEROED_BLOCK 3283
1655 /** Unable to parse the XML in DMG file. */
1656 #define VERR_VD_DMG_XML_PARSE_ERROR (-3284)
1657 /** Unable to locate a usable DMG file within the XAR archive. */
1658 #define VERR_VD_DMG_NOT_FOUND_INSIDE_XAR (-3285)
1659 /** The size of the raw image is not dividable by 512 */
1660 #define VERR_VD_RAW_SIZE_MODULO_512 (-3286)
1661 /** The size of the raw image is not dividable by 2048 */
1662 #define VERR_VD_RAW_SIZE_MODULO_2048 (-3287)
1663 /** The size of the raw optical image is too small (<= 32K) */
1664 #define VERR_VD_RAW_SIZE_OPTICAL_TOO_SMALL (-3288)
1665 /** The size of the raw floppy image is too big (>2.88MB) */
1666 #define VERR_VD_RAW_SIZE_FLOPPY_TOO_BIG (-3289)
1667
1668 /** @} */
1669
1670
1671 /** @name VBox Guest Library (VBGL) Status Codes
1672 * @{
1673 */
1674 /** Library was not initialized. */
1675 #define VERR_VBGL_NOT_INITIALIZED (-3300)
1676 /** Virtual address was not allocated by the library. */
1677 #define VERR_VBGL_INVALID_ADDR (-3301)
1678 /** IOCtl to VBoxGuest driver failed. */
1679 #define VERR_VBGL_IOCTL_FAILED (-3302)
1680 /** @} */
1681
1682
1683 /** @name VBox USB (VUSB) Status Codes
1684 * @{
1685 */
1686 /** No available ports on the hub.
1687 * This error is returned when a device is attempted created and/or attached
1688 * to a hub which is out of ports. */
1689 #define VERR_VUSB_NO_PORTS (-3400)
1690 /** The requested operation cannot be performed on a detached USB device. */
1691 #define VERR_VUSB_DEVICE_NOT_ATTACHED (-3401)
1692 /** Failed to allocate memory for a URB. */
1693 #define VERR_VUSB_NO_URB_MEMORY (-3402)
1694 /** General failure during URB queuing.
1695 * This will go away when the queueing gets proper status code handling. */
1696 #define VERR_VUSB_FAILED_TO_QUEUE_URB (-3403)
1697 /** Device creation failed because the USB device name was not found. */
1698 #define VERR_VUSB_DEVICE_NAME_NOT_FOUND (-3404)
1699 /** Not permitted to open the USB device.
1700 * The user doesn't have access to the device in the usbfs, check the mount options. */
1701 #define VERR_VUSB_USBFS_PERMISSION (-3405)
1702 /** The requested operation cannot be performed because the device
1703 * is currently being reset. */
1704 #define VERR_VUSB_DEVICE_IS_RESETTING (-3406)
1705 /** The requested operation cannot be performed because the device
1706 * is currently suspended. */
1707 #define VERR_VUSB_DEVICE_IS_SUSPENDED (-3407)
1708 /** Not permitted to open the USB device.
1709 * The user doesn't have access to the device node, check group memberships. */
1710 #define VERR_VUSB_USB_DEVICE_PERMISSION (-3408)
1711 /** @} */
1712
1713
1714 /** @name VBox VGA Status Codes
1715 * @{
1716 */
1717 /** One of the custom modes was incorrect.
1718 * The format or bit count of the custom mode value is invalid. */
1719 #define VERR_VGA_INVALID_CUSTOM_MODE (-3500)
1720 /** The display connector is resizing. */
1721 #define VINF_VGA_RESIZE_IN_PROGRESS (3501)
1722 /** @} */
1723
1724
1725 /** @name Internal Networking Status Codes
1726 * @{
1727 */
1728 /** The networking interface to filter was not found. */
1729 #define VERR_INTNET_FLT_IF_NOT_FOUND (-3600)
1730 /** The networking interface to filter was busy (used by someone). */
1731 #define VERR_INTNET_FLT_IF_BUSY (-3601)
1732 /** Failed to create or connect to a networking interface filter. */
1733 #define VERR_INTNET_FLT_IF_FAILED (-3602)
1734 /** The network already exists with a different trunk configuration. */
1735 #define VERR_INTNET_INCOMPATIBLE_TRUNK (-3603)
1736 /** The network already exists with a different security profile (restricted / public). */
1737 #define VERR_INTNET_INCOMPATIBLE_FLAGS (-3604)
1738 /** Failed to create a virtual network interface instance. */
1739 #define VERR_INTNET_FLT_VNIC_CREATE_FAILED (-3605)
1740 /** Failed to retrieve a virtual network interface link ID. */
1741 #define VERR_INTNET_FLT_VNIC_LINK_ID_NOT_FOUND (-3606)
1742 /** Failed to initialize a virtual network interface instance. */
1743 #define VERR_INTNET_FLT_VNIC_INIT_FAILED (-3607)
1744 /** Failed to open a virtual network interface instance. */
1745 #define VERR_INTNET_FLT_VNIC_OPEN_FAILED (-3608)
1746 /** Failed to retrieve underlying (lower mac) link. */
1747 #define VERR_INTNET_FLT_LOWER_LINK_INFO_NOT_FOUND (-3609)
1748 /** Failed to open underlying link instance. */
1749 #define VERR_INTNET_FLT_LOWER_LINK_OPEN_FAILED (-3610)
1750 /** Failed to get underlying link ID. */
1751 #define VERR_INTNET_FLT_LOWER_LINK_ID_NOT_FOUND (-3611)
1752 /** @} */
1753
1754
1755 /** @name Support Driver Status Codes
1756 * @{
1757 */
1758 /** The component factory was not found. */
1759 #define VERR_SUPDRV_COMPONENT_NOT_FOUND (-3700)
1760 /** The component factories do not support the requested interface. */
1761 #define VERR_SUPDRV_INTERFACE_NOT_SUPPORTED (-3701)
1762 /** The service module was not found. */
1763 #define VERR_SUPDRV_SERVICE_NOT_FOUND (-3702)
1764 /** The host kernel is too old. */
1765 #define VERR_SUPDRV_KERNEL_TOO_OLD_FOR_VTX (-3703)
1766 /** Bad VTG magic value. */
1767 #define VERR_SUPDRV_VTG_MAGIC (-3704)
1768 /** Bad VTG bit count value. */
1769 #define VERR_SUPDRV_VTG_BITS (-3705)
1770 /** Bad VTG header - misc. */
1771 #define VERR_SUPDRV_VTG_BAD_HDR_MISC (-3706)
1772 /** Bad VTG header - offset. */
1773 #define VERR_SUPDRV_VTG_BAD_HDR_OFF (-3707)
1774 /** Bad VTG header - offset. */
1775 #define VERR_SUPDRV_VTG_BAD_HDR_PTR (-3708)
1776 /** Bad VTG header - to low value. */
1777 #define VERR_SUPDRV_VTG_BAD_HDR_TOO_FEW (-3709)
1778 /** Bad VTG header - to high value. */
1779 #define VERR_SUPDRV_VTG_BAD_HDR_TOO_MUCH (-3710)
1780 /** Bad VTG header - size value is not a multiple of the structure size. */
1781 #define VERR_SUPDRV_VTG_BAD_HDR_NOT_MULTIPLE (-3711)
1782 /** Bad VTG string table offset. */
1783 #define VERR_SUPDRV_VTG_STRTAB_OFF (-3712)
1784 /** Bad VTG string. */
1785 #define VERR_SUPDRV_VTG_BAD_STRING (-3713)
1786 /** VTG string is too long. */
1787 #define VERR_SUPDRV_VTG_STRING_TOO_LONG (-3714)
1788 /** Bad VTG attribute value. */
1789 #define VERR_SUPDRV_VTG_BAD_ATTR (-3715)
1790 /** Bad VTG provider descriptor. */
1791 #define VERR_SUPDRV_VTG_BAD_PROVIDER (-3716)
1792 /** Bad VTG probe descriptor. */
1793 #define VERR_SUPDRV_VTG_BAD_PROBE (-3717)
1794 /** Bad VTG argument list descriptor. */
1795 #define VERR_SUPDRV_VTG_BAD_ARGLIST (-3718)
1796 /** Bad VTG probe enabled data. */
1797 #define VERR_SUPDRV_VTG_BAD_PROBE_ENABLED (-3719)
1798 /** Bad VTG probe location record. */
1799 #define VERR_SUPDRV_VTG_BAD_PROBE_LOC (-3720)
1800 /** The VTG object for the session or image has already been registered. */
1801 #define VERR_SUPDRV_VTG_ALREADY_REGISTERED (-3721)
1802 /** A driver may only register one VTG object per session. */
1803 #define VERR_SUPDRV_VTG_ONLY_ONCE_PER_SESSION (-3722)
1804 /** A tracer has already been registered. */
1805 #define VERR_SUPDRV_TRACER_ALREADY_REGISTERED (-3723)
1806 /** The session has no tracer associated with it. */
1807 #define VERR_SUPDRV_TRACER_NOT_REGISTERED (-3724)
1808 /** The tracer has already been opened in this sesssion. */
1809 #define VERR_SUPDRV_TRACER_ALREADY_OPENED (-3725)
1810 /** The tracer has not been opened. */
1811 #define VERR_SUPDRV_TRACER_NOT_OPENED (-3726)
1812 /** There is no tracer present. */
1813 #define VERR_SUPDRV_TRACER_NOT_PRESENT (-3727)
1814 /** The tracer is unloading. */
1815 #define VERR_SUPDRV_TRACER_UNLOADING (-3728)
1816 /** Another thread in the session is talking to the tracer. */
1817 #define VERR_SUPDRV_TRACER_SESSION_BUSY (-3729)
1818 /** The tracer cannot open it self in the same session. */
1819 #define VERR_SUPDRV_TRACER_CANNOT_OPEN_SELF (-3730)
1820 /** Bad argument flags. */
1821 #define VERR_SUPDRV_TRACER_BAD_ARG_FLAGS (-3731)
1822 /** The session has reached the max number of (user mode) providers. */
1823 #define VERR_SUPDRV_TRACER_TOO_MANY_PROVIDERS (-3732)
1824 /** The tracepoint provider object is too large. */
1825 #define VERR_SUPDRV_TRACER_TOO_LARGE (-3733)
1826 /** The probe location array isn't adjacent to the probe enable array. */
1827 #define VERR_SUPDRV_TRACER_UMOD_NOT_ADJACENT (-3734)
1828 /** The user mode tracepoint provider has too many probe locations and
1829 * probes. */
1830 #define VERR_SUPDRV_TRACER_UMOD_TOO_MANY_PROBES (-3735)
1831 /** The user mode tracepoint provider string table is too large. */
1832 #define VERR_SUPDRV_TRACER_UMOD_STRTAB_TOO_BIG (-3736)
1833 /** The user mode tracepoint provider string table offset is bad. */
1834 #define VERR_SUPDRV_TRACER_UMOD_STRTAB_OFF_BAD (-3737)
1835 /** The VM process was denied access to vboxdrv because someone have managed to
1836 * open the process or its main thread with too broad access rights. */
1837 #define VERR_SUPDRV_HARDENING_EVIL_HANDLE (-3738)
1838 /** Error opening the ApiPort LPC object. */
1839 #define VERR_SUPDRV_APIPORT_OPEN_ERROR (-3739)
1840 /** Error enumerating all processes in the session. */
1841 #define VERR_SUPDRV_SESSION_PROCESS_ENUM_ERROR (-3740)
1842 /** The CSRSS instance associated with the client process could not be
1843 * located. */
1844 #define VERR_SUPDRV_CSRSS_NOT_FOUND (-3741)
1845 /** Type error opening the ApiPort LPC object. */
1846 #define VERR_SUPDRV_APIPORT_OPEN_ERROR_TYPE (-3742)
1847 /** Failed to measure the TSC delta between two CPUs. */
1848 #define VERR_SUPDRV_TSC_DELTA_MEASUREMENT_FAILED (-3743)
1849 /** Failed to calculate the TSC frequency. */
1850 #define VERR_SUPDRV_TSC_FREQ_MEASUREMENT_FAILED (-3744)
1851 /** Failed to get the delta-adjusted TSC value. */
1852 #define VERR_SUPDRV_TSC_READ_FAILED (-3745)
1853 /** Failed to measure the TSC delta between two CPUs, continue without any
1854 * TSC-delta. */
1855 #define VWRN_SUPDRV_TSC_DELTA_MEASUREMENT_FAILED 3746
1856 /** A TSC-delta measurement request is currently being serviced. */
1857 #define VERR_SUPDRV_TSC_DELTA_MEASUREMENT_BUSY (-3747)
1858 /** The process trying to open VBoxDrv is not a budding VM process (1). */
1859 #define VERR_SUPDRV_NOT_BUDDING_VM_PROCESS_1 (-3748)
1860 /** The process trying to open VBoxDrv is not a budding VM process (2). */
1861 #define VERR_SUPDRV_NOT_BUDDING_VM_PROCESS_2 (-3749)
1862 /** @} */
1863
1864
1865 /** @name Support Library Status Codes
1866 * @{
1867 */
1868 /** The specified path was not absolute (hardening). */
1869 #define VERR_SUPLIB_PATH_NOT_ABSOLUTE (-3750)
1870 /** The specified path was not clean (hardening). */
1871 #define VERR_SUPLIB_PATH_NOT_CLEAN (-3751)
1872 /** The specified path is too long (hardening). */
1873 #define VERR_SUPLIB_PATH_TOO_LONG (-3752)
1874 /** The specified path is too short (hardening). */
1875 #define VERR_SUPLIB_PATH_TOO_SHORT (-3753)
1876 /** The specified path has too many components (hardening). */
1877 #define VERR_SUPLIB_PATH_TOO_MANY_COMPONENTS (-3754)
1878 /** The specified path is a root path (hardening). */
1879 #define VERR_SUPLIB_PATH_IS_ROOT (-3755)
1880 /** Failed to enumerate directory (hardening). */
1881 #define VERR_SUPLIB_DIR_ENUM_FAILED (-3756)
1882 /** Failed to stat a file/dir during enumeration (hardening). */
1883 #define VERR_SUPLIB_STAT_ENUM_FAILED (-3757)
1884 /** Failed to stat a file/dir (hardening). */
1885 #define VERR_SUPLIB_STAT_FAILED (-3758)
1886 /** Failed to fstat a native handle (hardening). */
1887 #define VERR_SUPLIB_FSTAT_FAILED (-3759)
1888 /** Found an illegal symbolic link (hardening). */
1889 #define VERR_SUPLIB_SYMLINKS_ARE_NOT_PERMITTED (-3760)
1890 /** Found something which isn't a file nor a directory (hardening). */
1891 #define VERR_SUPLIB_NOT_DIR_NOT_FILE (-3761)
1892 /** The specified path is a directory and not a file (hardening). */
1893 #define VERR_SUPLIB_IS_DIRECTORY (-3762)
1894 /** The specified path is a file and not a directory (hardening). */
1895 #define VERR_SUPLIB_IS_FILE (-3763)
1896 /** The path is not the same object as the native handle (hardening). */
1897 #define VERR_SUPLIB_NOT_SAME_OBJECT (-3764)
1898 /** The owner is not root (hardening). */
1899 #define VERR_SUPLIB_OWNER_NOT_ROOT (-3765)
1900 /** The group is a non-system group and it has write access (hardening). */
1901 #define VERR_SUPLIB_WRITE_NON_SYS_GROUP (-3766)
1902 /** The file or directory is world writable (hardening). */
1903 #define VERR_SUPLIB_WORLD_WRITABLE (-3767)
1904 /** The argv[0] of an internal application does not match the executable image
1905 * path (hardening). */
1906 #define VERR_SUPLIB_INVALID_ARGV0_INTERNAL (-3768)
1907 /** The internal application does not reside in the correct place (hardening). */
1908 #define VERR_SUPLIB_INVALID_INTERNAL_APP_DIR (-3769)
1909 /** Unable to establish trusted of VM process (0). */
1910 #define VERR_SUPLIB_NT_PROCESS_UNTRUSTED_0 (-3770)
1911 /** Unable to establish trusted of VM process (1). */
1912 #define VERR_SUPLIB_NT_PROCESS_UNTRUSTED_1 (-3771)
1913 /** Unable to establish trusted of VM process (2). */
1914 #define VERR_SUPLIB_NT_PROCESS_UNTRUSTED_2 (-3772)
1915 /** Unable to establish trusted of VM process (3). */
1916 #define VERR_SUPLIB_NT_PROCESS_UNTRUSTED_3 (-3773)
1917 /** Unable to establish trusted of VM process (4). */
1918 #define VERR_SUPLIB_NT_PROCESS_UNTRUSTED_4 (-3774)
1919 /** Unable to establish trusted of VM process (5). */
1920 #define VERR_SUPLIB_NT_PROCESS_UNTRUSTED_5 (-3775)
1921 /** Unable to make text memory writeable (hardening). */
1922 #define VERR_SUPLIB_TEXT_NOT_WRITEABLE (-3776)
1923 /** Unable to seal text memory again to protect against write access (hardening). */
1924 #define VERR_SUPLIB_TEXT_NOT_SEALED (-3777)
1925 /** Unexpected instruction encountered for which there is no patch strategy
1926 * implemented (hardening). */
1927 #define VERR_SUPLIB_UNEXPECTED_INSTRUCTION (-3778)
1928 /** @} */
1929
1930
1931 /** @name VBox GMM Status Codes
1932 * @{
1933 */
1934 /** The GMM is out of pages and needs to be give another chunk of user memory that
1935 * it can lock down and borrow pages from. */
1936 #define VERR_GMM_SEED_ME (-3800)
1937 /** Unable to allocate more pages from the host system. */
1938 #define VERR_GMM_OUT_OF_MEMORY (-3801)
1939 /** Hit the global allocation limit.
1940 * If you know there is still sufficient memory available, try raising the limit. */
1941 #define VERR_GMM_HIT_GLOBAL_LIMIT (-3802)
1942 /** Hit the a VM account limit. */
1943 #define VERR_GMM_HIT_VM_ACCOUNT_LIMIT (-3803)
1944 /** Attempt to free more memory than what was previously allocated. */
1945 #define VERR_GMM_ATTEMPT_TO_FREE_TOO_MUCH (-3804)
1946 /** Attempted to report too many pages as deflated. */
1947 #define VERR_GMM_ATTEMPT_TO_DEFLATE_TOO_MUCH (-3805)
1948 /** The page to be freed or updated was not found. */
1949 #define VERR_GMM_PAGE_NOT_FOUND (-3806)
1950 /** The specified shared page was not actually private. */
1951 #define VERR_GMM_PAGE_NOT_PRIVATE (-3807)
1952 /** The specified shared page was not actually shared. */
1953 #define VERR_GMM_PAGE_NOT_SHARED (-3808)
1954 /** The page to be freed was already freed. */
1955 #define VERR_GMM_PAGE_ALREADY_FREE (-3809)
1956 /** The page to be updated or freed was noted owned by the caller. */
1957 #define VERR_GMM_NOT_PAGE_OWNER (-3810)
1958 /** The specified chunk was not found. */
1959 #define VERR_GMM_CHUNK_NOT_FOUND (-3811)
1960 /** The chunk has already been mapped into the process. */
1961 #define VERR_GMM_CHUNK_ALREADY_MAPPED (-3812)
1962 /** The chunk to be unmapped isn't actually mapped into the process. */
1963 #define VERR_GMM_CHUNK_NOT_MAPPED (-3813)
1964 /** The chunk has been mapped too many times already (impossible). */
1965 #define VERR_GMM_TOO_MANY_CHUNK_MAPPINGS (-3814)
1966 /** The reservation or reservation update was declined - too many VMs, too
1967 * little memory, and/or too low GMM configuration. */
1968 #define VERR_GMM_MEMORY_RESERVATION_DECLINED (-3815)
1969 /** A GMM sanity check failed. */
1970 #define VERR_GMM_IS_NOT_SANE (-3816)
1971 /** Inserting a new chunk failed. */
1972 #define VERR_GMM_CHUNK_INSERT (-3817)
1973 /** Failed to obtain the GMM instance. */
1974 #define VERR_GMM_INSTANCE (-3818)
1975 /** Bad mutex semaphore flags. */
1976 #define VERR_GMM_MTX_FLAGS (-3819)
1977 /** Internal processing error in the page allocator. */
1978 #define VERR_GMM_ALLOC_PAGES_IPE (-3820)
1979 /** Invalid page count given to GMMR3FreePagesPerform. */
1980 #define VERR_GMM_ACTUAL_PAGES_IPE (-3821)
1981 /** The shared module name is too long. */
1982 #define VERR_GMM_MODULE_NAME_TOO_LONG (-3822)
1983 /** The shared module version string is too long. */
1984 #define VERR_GMM_MODULE_VERSION_TOO_LONG (-3823)
1985 /** The shared module has too many regions. */
1986 #define VERR_GMM_TOO_MANY_REGIONS (-3824)
1987 /** The guest has reported too many modules. */
1988 #define VERR_GMM_TOO_MANY_PER_VM_MODULES (-3825)
1989 /** The guest has reported too many modules. */
1990 #define VERR_GMM_TOO_MANY_GLOBAL_MODULES (-3826)
1991 /** The shared module is already registered. */
1992 #define VINF_GMM_SHARED_MODULE_ALREADY_REGISTERED (3827)
1993 /** The shared module clashed address wise with a previously registered
1994 * module. */
1995 #define VERR_GMM_SHARED_MODULE_ADDRESS_CLASH (-3828)
1996 /** The shared module was not found. */
1997 #define VERR_GMM_SHARED_MODULE_NOT_FOUND (-3829)
1998 /** The size of the shared module was out of range. */
1999 #define VERR_GMM_BAD_SHARED_MODULE_SIZE (-3830)
2000 /** The size of the one or more regions in the shared module was out of
2001 * range. */
2002 #define VERR_GMM_SHARED_MODULE_BAD_REGIONS_SIZE (-3831)
2003 /** @} */
2004
2005
2006 /** @name VBox GVM Status Codes
2007 * @{
2008 */
2009 /** The GVM is out of VM handle space. */
2010 #define VERR_GVM_TOO_MANY_VMS (-3900)
2011 /** The EMT was not blocked at the time of the call. */
2012 #define VINF_GVM_NOT_BLOCKED 3901
2013 /** The EMT was not busy running guest code at the time of the call. */
2014 #define VINF_GVM_NOT_BUSY_IN_GC 3902
2015 /** RTThreadYield was called during a GVMMR0SchedPoll call. */
2016 #define VINF_GVM_YIELDED 3903
2017 /** @} */
2018
2019
2020 /** @name VBox VMX Status Codes
2021 * @{
2022 */
2023 /** VMXON failed; possibly because it was already run before. */
2024 #define VERR_VMX_VMXON_FAILED (-4000)
2025 /** Invalid VMCS pointer.
2026 * (Can be OR'ed with VERR_VMX_INVALID_VMCS_FIELD.) */
2027 #define VERR_VMX_INVALID_VMCS_PTR (-4001)
2028 /** Invalid VMCS index or write to read-only element. */
2029 #define VERR_VMX_INVALID_VMCS_FIELD (-4002)
2030 /** Reserved for future status code that we wish to OR with
2031 * VERR_VMX_INVALID_VMCS_PTR and VERR_VMX_INVALID_VMCS_FIELD. */
2032 #define VERR_VMX_RESERVED (-4003)
2033 /** Invalid VMXON pointer. */
2034 #define VERR_VMX_INVALID_VMXON_PTR (-4004)
2035 /** Unable to start VM execution. */
2036 #define VERR_VMX_UNABLE_TO_START_VM (-4005)
2037 /** Unable to switch due to invalid host state. */
2038 #define VERR_VMX_INVALID_HOST_STATE (-4006)
2039 /** IA32_FEATURE_CONTROL MSR not setup correcty (turn on VMX in the host system BIOS) */
2040 #define VERR_VMX_ILLEGAL_FEATURE_CONTROL_MSR (-4007)
2041 /** Invalid CPU mode for VMX execution. */
2042 #define VERR_VMX_UNSUPPORTED_MODE (-4008)
2043 /** VMX CPU extension not available */
2044 #define VERR_VMX_NO_VMX (-4009)
2045 /** CPU was incorrectly left in VMX root mode; incompatible with VirtualBox */
2046 #define VERR_VMX_IN_VMX_ROOT_MODE (-4011)
2047 /** Somebody cleared X86_CR4_VMXE in the CR4 register. */
2048 #define VERR_VMX_X86_CR4_VMXE_CLEARED (-4012)
2049 /** Failed to enable and lock VT-x features. */
2050 #define VERR_VMX_MSR_LOCKING_FAILED (-4013)
2051 /** Unable to switch due to invalid guest state. */
2052 #define VERR_VMX_INVALID_GUEST_STATE (-4014)
2053 /** Unexpected VM exit. */
2054 #define VERR_VMX_UNEXPECTED_EXIT (-4015)
2055 /** Unexpected VM exception. */
2056 #define VERR_VMX_UNEXPECTED_EXCEPTION (-4016)
2057 /** Unexpected interruption exit type. */
2058 #define VERR_VMX_UNEXPECTED_INTERRUPTION_EXIT_TYPE (-4017)
2059 /** CPU is not in VMX root mode; unexpected when leaving VMX root mode. */
2060 #define VERR_VMX_NOT_IN_VMX_ROOT_MODE (-4018)
2061 /** Undefined VM exit code. */
2062 #define VERR_VMX_UNDEFINED_EXIT_CODE (-4019)
2063 /** VMPTRLD failed; possibly because of invalid VMCS launch-state. */
2064 #define VERR_VMX_VMPTRLD_FAILED (-4021)
2065 /** Invalid VMCS pointer passed to VMLAUNCH/VMRESUME. */
2066 #define VERR_VMX_INVALID_VMCS_PTR_TO_START_VM (-4022)
2067 /** Internal VMX processing error no 1. */
2068 #define VERR_VMX_IPE_1 (-4023)
2069 /** Internal VMX processing error no 2. */
2070 #define VERR_VMX_IPE_2 (-4024)
2071 /** Internal VMX processing error no 3. */
2072 #define VERR_VMX_IPE_3 (-4025)
2073 /** Internal VMX processing error no 4. */
2074 #define VERR_VMX_IPE_4 (-4026)
2075 /** Internal VMX processing error no 5. */
2076 #define VERR_VMX_IPE_5 (-4027)
2077 /** VT-x features for all modes (SMX and non-SMX) disabled by the BIOS. */
2078 #define VERR_VMX_MSR_ALL_VMX_DISABLED (-4028)
2079 /** VT-x features disabled by the BIOS. */
2080 #define VERR_VMX_MSR_VMX_DISABLED (-4029)
2081 /** VM-Entry Controls internal cache invalid. */
2082 #define VERR_VMX_ENTRY_CTLS_CACHE_INVALID (-4030)
2083 /** VM-Exit Controls internal cache invalid. */
2084 #define VERR_VMX_EXIT_CTLS_CACHE_INVALID (-4031)
2085 /** VM-Execution Pin-based Controls internal cache invalid. */
2086 #define VERR_VMX_PIN_EXEC_CTLS_CACHE_INVALID (-4032)
2087 /** VM-Execution Primary Processor-based Controls internal cache
2088 * invalid. */
2089 #define VERR_VMX_PROC_EXEC_CTLS_CACHE_INVALID (-4033)
2090 /** VM-Execution Secondary Processor-based Controls internal
2091 * cache invalid. */
2092 #define VERR_VMX_PROC_EXEC2_CTLS_CACHE_INVALID (-4034)
2093 /** Failed to set VMXON enable bit while enabling VT-x through the MSR. */
2094 #define VERR_VMX_MSR_VMX_ENABLE_FAILED (-4035)
2095 /** Failed to enable VMXON-in-SMX bit while enabling VT-x through the MSR. */
2096 #define VERR_VMX_MSR_SMX_VMX_ENABLE_FAILED (-4036)
2097 /** @} */
2098
2099
2100 /** @name VBox SVM Status Codes
2101 * @{
2102 */
2103 /** Unable to start VM execution. */
2104 #define VERR_SVM_UNABLE_TO_START_VM (-4050)
2105 /** AMD-V bit not set in K6_EFER MSR */
2106 #define VERR_SVM_ILLEGAL_EFER_MSR (-4051)
2107 /** AMD-V CPU extension not available. */
2108 #define VERR_SVM_NO_SVM (-4052)
2109 /** AMD-V CPU extension disabled (by BIOS). */
2110 #define VERR_SVM_DISABLED (-4053)
2111 /** AMD-V CPU extension in-use. */
2112 #define VERR_SVM_IN_USE (-4054)
2113 /** Invalid pVMCB. */
2114 #define VERR_SVM_INVALID_PVMCB (-4055)
2115 /** Unexpected SVM exit. */
2116 #define VERR_SVM_UNEXPECTED_EXIT (-4056)
2117 /** Unexpected SVM exception exit. */
2118 #define VERR_SVM_UNEXPECTED_XCPT_EXIT (-4057)
2119 /** Unexpected SVM patch type. */
2120 #define VERR_SVM_UNEXPECTED_PATCH_TYPE (-4058)
2121 /** Unable to start VM execution due to an invalid guest state. */
2122 #define VERR_SVM_INVALID_GUEST_STATE (-4059)
2123 /** Unknown or unrecognized SVM exit. */
2124 #define VERR_SVM_UNKNOWN_EXIT (-4060)
2125 /** Internal SVM processing error no 1. */
2126 #define VERR_SVM_IPE_1 (-4061)
2127 /** Internal SVM processing error no 2. */
2128 #define VERR_SVM_IPE_2 (-4062)
2129 /** Internal SVM processing error no 3. */
2130 #define VERR_SVM_IPE_3 (-4063)
2131 /** Internal SVM processing error no 4. */
2132 #define VERR_SVM_IPE_4 (-4064)
2133 /** Internal SVM processing error no 5. */
2134 #define VERR_SVM_IPE_5 (-4065)
2135 /** The nested-guest \#VMEXIT processing failed, initiate shutdown. */
2136 #define VERR_SVM_VMEXIT_FAILED (-4066)
2137 /** An operation caused a nested-guest SVM \#VMEXIT. */
2138 #define VINF_SVM_VMEXIT 4067
2139 /** @} */
2140
2141
2142 /** @name VBox HM Status Codes
2143 * @{
2144 */
2145 /** Unable to start VM execution. */
2146 #define VERR_HM_UNKNOWN_CPU (-4100)
2147 /** No CPUID support. */
2148 #define VERR_HM_NO_CPUID (-4101)
2149 /** Host is about to go into suspend mode. */
2150 #define VERR_HM_SUSPEND_PENDING (-4102)
2151 /** Conflicting CFGM values. */
2152 #define VERR_HM_CONFIG_MISMATCH (-4103)
2153 /** Internal processing error in the HM init code. */
2154 #define VERR_HM_ALREADY_ENABLED_IPE (-4104)
2155 /** Unexpected MSR in the auto-load/store area. */
2156 #define VERR_HM_UNEXPECTED_LD_ST_MSR (-4105)
2157 /** No 32-bit to 64-bit switcher in place. */
2158 #define VERR_HM_NO_32_TO_64_SWITCHER (-4106)
2159 /** HMR0Leave was called on the wrong CPU. */
2160 #define VERR_HM_WRONG_CPU (-4107)
2161 /** Internal processing error \#1 in the HM code. */
2162 #define VERR_HM_IPE_1 (-4108)
2163 /** Internal processing error \#2 in the HM code. */
2164 #define VERR_HM_IPE_2 (-4109)
2165 /** Wrong 32/64-bit switcher. */
2166 #define VERR_HM_WRONG_SWITCHER (-4110)
2167 /** Unknown I/O instruction. */
2168 #define VERR_HM_UNKNOWN_IO_INSTRUCTION (-4111)
2169 /** Unsupported CPU feature combination. */
2170 #define VERR_HM_UNSUPPORTED_CPU_FEATURE_COMBO (-4112)
2171 /** Internal processing error \#3 in the HM code. */
2172 #define VERR_HM_IPE_3 (-4113)
2173 /** Internal processing error \#4 in the HM code. */
2174 #define VERR_HM_IPE_4 (-4114)
2175 /** Internal processing error \#5 in the HM code. */
2176 #define VERR_HM_IPE_5 (-4115)
2177 /** Invalid HM64ON32OP value. */
2178 #define VERR_HM_INVALID_HM64ON32OP (-4116)
2179 /** Resume guest execution after injecting a double-fault. */
2180 #define VINF_HM_DOUBLE_FAULT 4117
2181 /** The requested nested-guest VM-exit intercept is not active or not in
2182 * nested-guest execution mode. */
2183 #define VINF_HM_INTERCEPT_NOT_ACTIVE 4118
2184 /** @} */
2185
2186
2187 /** @name VBox Disassembler Status Codes
2188 * @{
2189 */
2190 /** Invalid opcode byte(s) */
2191 #define VERR_DIS_INVALID_OPCODE (-4200)
2192 /** Generic failure during disassembly. */
2193 #define VERR_DIS_GEN_FAILURE (-4201)
2194 /** No read callback. */
2195 #define VERR_DIS_NO_READ_CALLBACK (-4202)
2196 /** Invalid Mod/RM. */
2197 #define VERR_DIS_INVALID_MODRM (-4203)
2198 /** Invalid parameter index. */
2199 #define VERR_DIS_INVALID_PARAMETER (-4204)
2200 /** The instruction is too long. */
2201 #define VERR_DIS_TOO_LONG_INSTR (-4206)
2202 /** @} */
2203
2204
2205 /** @name VBox Webservice Status Codes
2206 * @{
2207 */
2208 /** Authentication failed (ISessionManager::logon()) */
2209 #define VERR_WEB_NOT_AUTHENTICATED (-4300)
2210 /** Invalid format of managed object reference */
2211 #define VERR_WEB_INVALID_MANAGED_OBJECT_REFERENCE (-4301)
2212 /** Invalid session ID in managed object reference */
2213 #define VERR_WEB_INVALID_SESSION_ID (-4302)
2214 /** Invalid object ID in managed object reference */
2215 #define VERR_WEB_INVALID_OBJECT_ID (-4303)
2216 /** Unsupported interface for managed object reference */
2217 #define VERR_WEB_UNSUPPORTED_INTERFACE (-4304)
2218 /** @} */
2219
2220
2221 /** @name VBox PARAV Status Codes
2222 * @{
2223 */
2224 /** Switch back to host */
2225 #define VINF_PARAV_SWITCH_TO_HOST 4400
2226
2227 /** @} */
2228
2229 /** @name VBox Video HW Acceleration command status
2230 * @{
2231 */
2232 /** command processing is pending, a completion handler will be called */
2233 #define VINF_VHWA_CMD_PENDING 4500
2234
2235 /** @} */
2236
2237
2238 /** @name VBox COM error codes
2239 *
2240 * @remarks Global::vboxStatusCodeToCOM and Global::vboxStatusCodeFromCOM uses
2241 * these for conversion that is lossless with respect to important COM
2242 * status codes. These methods should be moved to the glue library.
2243 * @{ */
2244 /** Unexpected turn of events. */
2245 #define VERR_COM_UNEXPECTED (-4600)
2246 /** The base of the VirtualBox COM status codes (the lower value)
2247 * corresponding 1:1 to VBOX_E_XXX. This is the lowest value. */
2248 #define VERR_COM_VBOX_LOWEST (-4699)
2249 /** Object corresponding to the supplied arguments does not exist. */
2250 #define VERR_COM_OBJECT_NOT_FOUND (VERR_COM_VBOX_LOWEST + 1)
2251 /** Current virtual machine state prevents the operation. */
2252 #define VERR_COM_INVALID_VM_STATE (VERR_COM_VBOX_LOWEST + 2)
2253 /** Virtual machine error occurred attempting the operation. */
2254 #define VERR_COM_VM_ERROR (VERR_COM_VBOX_LOWEST + 3)
2255 /** File not accessible or erroneous file contents. */
2256 #define VERR_COM_FILE_ERROR (VERR_COM_VBOX_LOWEST + 4)
2257 /** IPRT error. */
2258 #define VERR_COM_IPRT_ERROR (VERR_COM_VBOX_LOWEST + 5)
2259 /** Pluggable Device Manager error. */
2260 #define VERR_COM_PDM_ERROR (VERR_COM_VBOX_LOWEST + 6)
2261 /** Current object state prohibits operation. */
2262 #define VERR_COM_INVALID_OBJECT_STATE (VERR_COM_VBOX_LOWEST + 7)
2263 /** Host operating system related error. */
2264 #define VERR_COM_HOST_ERROR (VERR_COM_VBOX_LOWEST + 8)
2265 /** Requested operation is not supported. */
2266 #define VERR_COM_NOT_SUPPORTED (VERR_COM_VBOX_LOWEST + 9)
2267 /** Invalid XML found. */
2268 #define VERR_COM_XML_ERROR (VERR_COM_VBOX_LOWEST + 10)
2269 /** Current session state prohibits operation. */
2270 #define VERR_COM_INVALID_SESSION_STATE (VERR_COM_VBOX_LOWEST + 11)
2271 /** Object being in use prohibits operation. */
2272 #define VERR_COM_OBJECT_IN_USE (VERR_COM_VBOX_LOWEST + 12)
2273 /** Returned by callback methods which does not need to be called
2274 * again because the client does not actually make use of them. */
2275 #define VERR_COM_DONT_CALL_AGAIN (VERR_COM_VBOX_LOWEST + 13)
2276 /** @} */
2277
2278 /** @name VBox VMMDev Status codes
2279 * @{
2280 */
2281 /** CPU hotplug events from VMMDev are not monitored by the guest. */
2282 #define VERR_VMMDEV_CPU_HOTPLUG_NOT_MONITORED_BY_GUEST (-4700)
2283 /** @} */
2284
2285 /** @name VBox async I/O manager Status Codes
2286 * @{
2287 */
2288 /** Async I/O task is pending, a completion handler will be called. */
2289 #define VINF_AIO_TASK_PENDING 4800
2290 /** @} */
2291
2292 /** @name VBox Virtual SCSI Status Codes
2293 * @{
2294 */
2295 /** LUN type is not supported. */
2296 #define VERR_VSCSI_LUN_TYPE_NOT_SUPPORTED (-4900)
2297 /** LUN is already/still attached to a device. */
2298 #define VERR_VSCSI_LUN_ATTACHED_TO_DEVICE (-4901)
2299 /** The specified LUN is invalid. */
2300 #define VERR_VSCSI_LUN_INVALID (-4902)
2301 /** The LUN is not attached to the device. */
2302 #define VERR_VSCSI_LUN_NOT_ATTACHED (-4903)
2303 /** The LUN is still busy. */
2304 #define VERR_VSCSI_LUN_BUSY (-4904)
2305 /** @} */
2306
2307 /** @name VBox FAM Status Codes
2308 * @{
2309 */
2310 /** FAM failed to open a connection. */
2311 #define VERR_FAM_OPEN_FAILED (-5000)
2312 /** FAM failed to add a file to the list to be monitored. */
2313 #define VERR_FAM_MONITOR_FILE_FAILED (-5001)
2314 /** FAM failed to add a directory to the list to be monitored. */
2315 #define VERR_FAM_MONITOR_DIRECTORY_FAILED (-5002)
2316 /** The connection to the FAM daemon was lost. */
2317 #define VERR_FAM_CONNECTION_LOST (-5003)
2318 /** @} */
2319
2320
2321 /** @name PCI Passtrhough Status Codes
2322 * @{
2323 */
2324 /** RamPreAlloc not set.
2325 * RAM pre-allocation is currently a requirement for PCI passthrough. */
2326 #define VERR_PCI_PASSTHROUGH_NO_RAM_PREALLOC (-5100)
2327 /** VT-x/AMD-V not active.
2328 * PCI passthrough currently works only if VT-x/AMD-V is active. */
2329 #define VERR_PCI_PASSTHROUGH_NO_HM (-5101)
2330 /** Nested paging not active.
2331 * PCI passthrough currently works only if nested paging is active. */
2332 #define VERR_PCI_PASSTHROUGH_NO_NESTED_PAGING (-5102)
2333 /** @} */
2334
2335
2336 /** @name GVMM Status Codes
2337 * @{
2338 */
2339 /** Internal error obtaining the GVMM instance. */
2340 #define VERR_GVMM_INSTANCE (-5200)
2341 /** GVMM does not support the range of CPUs present/possible on the host. */
2342 #define VERR_GVMM_HOST_CPU_RANGE (-5201)
2343 /** GVMM ran into some broken IPRT code. */
2344 #define VERR_GVMM_BROKEN_IPRT (-5202)
2345 /** Internal processing error \#1 in the GVMM code. */
2346 #define VERR_GVMM_IPE_1 (-5203)
2347 /** Internal processing error \#2 in the GVMM code. */
2348 #define VERR_GVMM_IPE_2 (-5204)
2349 /** @} */
2350
2351
2352 /** @name IEM Status Codes
2353 * @{ */
2354 /** The instruction is not yet implemented by IEM. */
2355 #define VERR_IEM_INSTR_NOT_IMPLEMENTED (-5300)
2356 /** Invalid operand size passed to an IEM function. */
2357 #define VERR_IEM_INVALID_OPERAND_SIZE (-5301)
2358 /** Invalid address mode passed to an IEM function. */
2359 #define VERR_IEM_INVALID_ADDRESS_MODE (-5302)
2360 /** Invalid effective segment register number passed to an IEM function. */
2361 #define VERR_IEM_INVALID_EFF_SEG (-5303)
2362 /** Invalid instruction length passed to an IEM function. */
2363 #define VERR_IEM_INVALID_INSTR_LENGTH (-5304)
2364 /** Internal status code for indicating that a selector isn't valid (LAR, LSL,
2365 * VERR, VERW). This is not used outside the instruction implementations. */
2366 #define VINF_IEM_SELECTOR_NOT_OK (5305)
2367 /** Restart the current instruction. For testing only. */
2368 #define VERR_IEM_RESTART_INSTRUCTION (-5389)
2369 /** This particular aspect of the instruction is not yet implemented by IEM. */
2370 #define VERR_IEM_ASPECT_NOT_IMPLEMENTED (-5390)
2371 /** Internal processing error \#1 in the IEM code. */
2372 #define VERR_IEM_IPE_1 (-5391)
2373 /** Internal processing error \#2 in the IEM code. */
2374 #define VERR_IEM_IPE_2 (-5392)
2375 /** Internal processing error \#3 in the IEM code. */
2376 #define VERR_IEM_IPE_3 (-5393)
2377 /** Internal processing error \#4 in the IEM code. */
2378 #define VERR_IEM_IPE_4 (-5394)
2379 /** Internal processing error \#5 in the IEM code. */
2380 #define VERR_IEM_IPE_5 (-5395)
2381 /** Internal processing error \#6 in the IEM code. */
2382 #define VERR_IEM_IPE_6 (-5396)
2383 /** Internal processing error \#7 in the IEM code. */
2384 #define VERR_IEM_IPE_7 (-5397)
2385 /** Internal processing error \#8 in the IEM code. */
2386 #define VERR_IEM_IPE_8 (-5398)
2387 /** Internal processing error \#9 in the IEM code. */
2388 #define VERR_IEM_IPE_9 (-5399)
2389 /** @} */
2390
2391
2392 /** @name DBGC Status Codes
2393 * @{ */
2394 /** Status that causes DBGC to quit. */
2395 #define VERR_DBGC_QUIT (-5400)
2396 /** Async command pending. */
2397 #define VWRN_DBGC_CMD_PENDING 5401
2398 /** The command has already been registered. */
2399 #define VWRN_DBGC_ALREADY_REGISTERED 5402
2400 /** The command cannot be deregistered because has not been registered. */
2401 #define VERR_DBGC_COMMANDS_NOT_REGISTERED (-5403)
2402 /** Unknown breakpoint. */
2403 #define VERR_DBGC_BP_NOT_FOUND (-5404)
2404 /** The breakpoint already exists. */
2405 #define VERR_DBGC_BP_EXISTS (-5405)
2406 /** The breakpoint has no command. */
2407 #define VINF_DBGC_BP_NO_COMMAND 5406
2408 /** Generic debugger command failure. */
2409 #define VERR_DBGC_COMMAND_FAILED (-5407)
2410 /** Logic bug in the DBGC code. */
2411 #define VERR_DBGC_IPE (-5408)
2412
2413 /** The lowest parse status code. */
2414 #define VERR_DBGC_PARSE_LOWEST (-5499)
2415 /** Syntax error - too few arguments. */
2416 #define VERR_DBGC_PARSE_TOO_FEW_ARGUMENTS (VERR_DBGC_PARSE_LOWEST + 0)
2417 /** Syntax error - too many arguments. */
2418 #define VERR_DBGC_PARSE_TOO_MANY_ARGUMENTS (VERR_DBGC_PARSE_LOWEST + 1)
2419 /** Syntax error - too many arguments for static storage. */
2420 #define VERR_DBGC_PARSE_ARGUMENT_OVERFLOW (VERR_DBGC_PARSE_LOWEST + 2)
2421 /** Syntax error - expected binary operator. */
2422 #define VERR_DBGC_PARSE_EXPECTED_BINARY_OP (VERR_DBGC_PARSE_LOWEST + 3)
2423
2424 /** Syntax error - the argument does not allow a range to be specified. */
2425 #define VERR_DBGC_PARSE_NO_RANGE_ALLOWED (VERR_DBGC_PARSE_LOWEST + 5)
2426 /** Syntax error - unbalanced quotes. */
2427 #define VERR_DBGC_PARSE_UNBALANCED_QUOTE (VERR_DBGC_PARSE_LOWEST + 6)
2428 /** Syntax error - unbalanced parenthesis. */
2429 #define VERR_DBGC_PARSE_UNBALANCED_PARENTHESIS (VERR_DBGC_PARSE_LOWEST + 7)
2430 /** Syntax error - an argument or subargument contains nothing useful. */
2431 #define VERR_DBGC_PARSE_EMPTY_ARGUMENT (VERR_DBGC_PARSE_LOWEST + 8)
2432 /** Syntax error - invalid operator usage. */
2433 #define VERR_DBGC_PARSE_UNEXPECTED_OPERATOR (VERR_DBGC_PARSE_LOWEST + 9)
2434 /** Syntax error - invalid numeric value. */
2435 #define VERR_DBGC_PARSE_INVALID_NUMBER (VERR_DBGC_PARSE_LOWEST + 10)
2436 /** Syntax error - numeric overflow. */
2437 #define VERR_DBGC_PARSE_NUMBER_TOO_BIG (VERR_DBGC_PARSE_LOWEST + 11)
2438 /** Syntax error - invalid operation attempted. */
2439 #define VERR_DBGC_PARSE_INVALID_OPERATION (VERR_DBGC_PARSE_LOWEST + 12)
2440 /** Syntax error - function not found. */
2441 #define VERR_DBGC_PARSE_FUNCTION_NOT_FOUND (VERR_DBGC_PARSE_LOWEST + 13)
2442 /** Syntax error - the specified function is not a function. */
2443 #define VERR_DBGC_PARSE_NOT_A_FUNCTION (VERR_DBGC_PARSE_LOWEST + 14)
2444 /** Syntax error - out of scratch memory. */
2445 #define VERR_DBGC_PARSE_NO_SCRATCH (VERR_DBGC_PARSE_LOWEST + 15)
2446 /** Syntax error - out of regular heap memory. */
2447 #define VERR_DBGC_PARSE_NO_MEMORY (VERR_DBGC_PARSE_LOWEST + 16)
2448 /** Syntax error - incorrect argument type. */
2449 #define VERR_DBGC_PARSE_INCORRECT_ARG_TYPE (VERR_DBGC_PARSE_LOWEST + 17)
2450 /** Syntax error - an undefined variable was referenced. */
2451 #define VERR_DBGC_PARSE_VARIABLE_NOT_FOUND (VERR_DBGC_PARSE_LOWEST + 18)
2452 /** Syntax error - a type conversion failed. */
2453 #define VERR_DBGC_PARSE_CONVERSION_FAILED (VERR_DBGC_PARSE_LOWEST + 19)
2454 /** Syntax error - you hit a debugger feature which isn't implemented yet.
2455 * (Feel free to help implement it.) */
2456 #define VERR_DBGC_PARSE_NOT_IMPLEMENTED (VERR_DBGC_PARSE_LOWEST + 20)
2457 /** Syntax error - Couldn't satisfy a request for a specific result type. */
2458 #define VERR_DBGC_PARSE_BAD_RESULT_TYPE (VERR_DBGC_PARSE_LOWEST + 21)
2459 /** Syntax error - Cannot read symbol value, it is a set-only symbol. */
2460 #define VERR_DBGC_PARSE_WRITEONLY_SYMBOL (VERR_DBGC_PARSE_LOWEST + 22)
2461 /** Syntax error - Invalid command name. */
2462 #define VERR_DBGC_PARSE_INVALD_COMMAND_NAME (VERR_DBGC_PARSE_LOWEST + 23)
2463 /** Syntax error - Command not found. */
2464 #define VERR_DBGC_PARSE_COMMAND_NOT_FOUND (VERR_DBGC_PARSE_LOWEST + 24)
2465 /** Syntax error - buggy parser. */
2466 #define VERR_DBGC_PARSE_BUG (VERR_DBGC_PARSE_LOWEST + 25)
2467 /** @} */
2468
2469
2470 /** @name Support driver/library shared verification status codes.
2471 * @{ */
2472 /** Process Verification Failure: The memory content does not match the image
2473 * file. */
2474 #define VERR_SUP_VP_MEMORY_VS_FILE_MISMATCH (-5600)
2475 /** Process Verification Failure: The memory protection of a image file section
2476 * does not match what the section header prescribes. */
2477 #define VERR_SUP_VP_SECTION_PROTECTION_MISMATCH (-5601)
2478 /** Process Verification Failure: One of the section in the image file is not
2479 * mapped into memory. */
2480 #define VERR_SUP_VP_SECTION_NOT_MAPPED (-5602)
2481 /** Process Verification Failure: One of the section in the image file is not
2482 * fully mapped into memory. */
2483 #define VERR_SUP_VP_SECTION_NOT_FULLY_MAPPED (-5603)
2484 /** Process Verification Failure: Bad file alignment value in image header. */
2485 #define VERR_SUP_VP_BAD_FILE_ALIGNMENT_VALUE (-5604)
2486 /** Process Verification Failure: Bad image base in header. */
2487 #define VERR_SUP_VP_BAD_IMAGE_BASE (-5605)
2488 /** Process Verification Failure: Bad image signature. */
2489 #define VERR_SUP_VP_BAD_IMAGE_SIGNATURE (-5606)
2490 /** Process Verification Failure: Bad image size. */
2491 #define VERR_SUP_VP_BAD_IMAGE_SIZE (-5607)
2492 /** Process Verification Failure: Bad new-header offset in the MZ header. */
2493 #define VERR_SUP_VP_BAD_MZ_OFFSET (-5608)
2494 /** Process Verification Failure: Bad optional header field. */
2495 #define VERR_SUP_VP_BAD_OPTIONAL_HEADER (-5609)
2496 /** Process Verification Failure: Bad section alignment value in image
2497 * header. */
2498 #define VERR_SUP_VP_BAD_SECTION_ALIGNMENT_VALUE (-5610)
2499 /** Process Verification Failure: Bad section raw data size. */
2500 #define VERR_SUP_VP_BAD_SECTION_FILE_SIZE (-5611)
2501 /** Process Verification Failure: Bad virtual section address. */
2502 #define VERR_SUP_VP_BAD_SECTION_RVA (-5612)
2503 /** Process Verification Failure: Bad virtual section size. */
2504 #define VERR_SUP_VP_BAD_SECTION_VIRTUAL_SIZE (-5613)
2505 /** Process Verification Failure: Bad size of image header. */
2506 #define VERR_SUP_VP_BAD_SIZE_OF_HEADERS (-5614)
2507 /** Process Verification Failure: The process is being debugged. */
2508 #define VERR_SUP_VP_DEBUGGED (-5615)
2509 /** Process Verification Failure: A DLL was found more than once. */
2510 #define VERR_SUP_VP_DUPLICATE_DLL_MAPPING (-5616)
2511 /** Process Verification Failure: Image section region is too large. */
2512 #define VERR_SUP_VP_EMPTY_REGION_TOO_LARGE (-5617)
2513 /** Process Verification Failure: Executable file name and process image name
2514 * does not match up. */
2515 #define VERR_SUP_VP_EXE_VS_PROC_NAME_MISMATCH (-5618)
2516 /** Process Verification Failure: Found executable memory allocated in the
2517 * process. There is only supposed be executable memory associated with
2518 * image file mappings (DLLs & EXE). */
2519 #define VERR_SUP_VP_FOUND_EXEC_MEMORY (-5619)
2520 /** Process Verification Failure: There is more than one known executable mapped
2521 * into the process. */
2522 #define VERR_SUP_VP_FOUND_MORE_THAN_ONE_EXE_MAPPING (-5620)
2523 /** Process Verification Failure: Error closing image file handle. */
2524 #define VERR_SUP_VP_IMAGE_FILE_CLOSE_ERROR (-5621)
2525 /** Process Verification Failure: Error opening image file. */
2526 #define VERR_SUP_VP_IMAGE_FILE_OPEN_ERROR (-5622)
2527 /** Process Verification Failure: Error reading image file header. */
2528 #define VERR_SUP_VP_IMAGE_HDR_READ_ERROR (-5623)
2529 /** Process Verification Failure: Image mapping is bogus as the first region
2530 * has different AllocationBase and BaseAddress values, indicating that a
2531 * section was unmapped or otherwise tampered with. */
2532 #define VERR_SUP_VP_IMAGE_MAPPING_BASE_ERROR (-5624)
2533 /** Process Verification Failure: Error reading process memory for comparing
2534 * with disk data. */
2535 #define VERR_SUP_VP_MEMORY_READ_ERROR (-5625)
2536 /** Process Verification Failure: Found no executable mapped into the process
2537 * address space. */
2538 #define VERR_SUP_VP_NO_FOUND_NO_EXE_MAPPING (-5626)
2539 /** Process Verification Failure: An image mapping failed to report a name. */
2540 #define VERR_SUP_VP_NO_IMAGE_MAPPING_NAME (-5627)
2541 /** Process Verification Failure: No KERNE32.DLL mapping found. This is
2542 * impossible. */
2543 #define VERR_SUP_VP_NO_KERNEL32_MAPPING (-5628)
2544 /** Process Verification Failure: Error allocating memory. */
2545 #define VERR_SUP_VP_NO_MEMORY (-5629)
2546 /** Process Verification Failure: Error allocating state memory or querying
2547 * the system32 path. */
2548 #define VERR_SUP_VP_NO_MEMORY_STATE (-5630)
2549 /** Process Verification Failure: No NTDLL.DLL mapping found. This is
2550 * impossible. */
2551 #define VERR_SUP_VP_NO_NTDLL_MAPPING (-5631)
2552 /** Process Verification Failure: A DLL residing outside System32 was found
2553 * in the process. */
2554 #define VERR_SUP_VP_NON_SYSTEM32_DLL (-5632)
2555 /** Process Verification Failure: An unknown and unwanted DLL was found loaded
2556 * into the process. */
2557 #define VERR_SUP_VP_NOT_KNOWN_DLL_OR_EXE (-5633)
2558 /** Process Verification Failure: The name of an image file changes between
2559 * mapping regions. */
2560 #define VERR_SUP_VP_NT_MAPPING_NAME_CHANGED (-5634)
2561 /** Process Verification Failure: Error querying process name. */
2562 #define VERR_SUP_VP_NT_QI_PROCESS_NM_ERROR (-5635)
2563 /** Process Verification Failure: Error querying thread information. */
2564 #define VERR_SUP_VP_NT_QI_THREAD_ERROR (-5636)
2565 /** Process Verification Failure: Error query virtual memory information. */
2566 #define VERR_SUP_VP_NT_QI_VIRTUAL_MEMORY_ERROR (-5637)
2567 /** Process Verification Failure: Error query virtual memory mapping name. */
2568 #define VERR_SUP_VP_NT_QI_VIRTUAL_MEMORY_NM_ERROR (-5638)
2569 /** Process Verification Failure: Error determining the full path of
2570 * System32. */
2571 #define VERR_SUP_VP_SYSTEM32_PATH (-5639)
2572 /** Process Verification Failure: The process has more than one thread. */
2573 #define VERR_SUP_VP_THREAD_NOT_ALONE (-5640)
2574 /** Process Verification Failure: The image mapping is too large (>= 2GB). */
2575 #define VERR_SUP_VP_TOO_HIGH_REGION_RVA (-5641)
2576 /** Process Verification Failure: The memory region is too large (>= 2GB). */
2577 #define VERR_SUP_VP_TOO_LARGE_REGION (-5642)
2578 /** Process Verification Failure: There are too many DLLs loaded. */
2579 #define VERR_SUP_VP_TOO_MANY_DLLS_LOADED (-5643)
2580 /** Process Verification Failure: An image has too many regions. */
2581 #define VERR_SUP_VP_TOO_MANY_IMAGE_REGIONS (-5644)
2582 /** Process Verification Failure: The process has too many virtual memory
2583 * regions. */
2584 #define VERR_SUP_VP_TOO_MANY_MEMORY_REGIONS (-5645)
2585 /** Process Verification Failure: An image has too many sections. */
2586 #define VERR_SUP_VP_TOO_MANY_SECTIONS (-5646)
2587 /** Process Verification Failure: An image is targeting an unexpected
2588 * machine/CPU. */
2589 #define VERR_SUP_VP_UNEXPECTED_IMAGE_MACHINE (-5647)
2590 /** Process Verification Failure: Unexpected section protection flag
2591 * combination. */
2592 #define VERR_SUP_VP_UNEXPECTED_SECTION_FLAGS (-5648)
2593 /** Process Verification Failure: Expected the process and exe to have forced
2594 * integrity checking enabled (verifying signatures). */
2595 #define VERR_SUP_VP_EXE_MISSING_FORCE_INTEGRITY (-5649)
2596 /** Process Verification Failure: Expected the process and exe to have dynamic
2597 * base enabled. */
2598 #define VERR_SUP_VP_EXE_MISSING_DYNAMIC_BASE (-5650)
2599 /** Process Verification Failure: Expected the process and exe to advertise
2600 * NX compatibility. */
2601 #define VERR_SUP_VP_EXE_MISSING_NX_COMPAT (-5651)
2602 /** Process Verification Failure: The DllCharacteristics of the process
2603 * does not match the value in the optional header in the exe file. */
2604 #define VERR_SUP_VP_DLL_CHARECTERISTICS_MISMATCH (-5652)
2605 /** Process Verification Failure: The ImageCharacteristics of the process
2606 * does not match the value in the file header in the exe file. */
2607 #define VERR_SUP_VP_IMAGE_CHARECTERISTICS_MISMATCH (-5653)
2608 /** Process Verification Failure: Error querying image information. */
2609 #define VERR_SUP_VP_NT_QI_PROCESS_IMG_INFO_ERROR (-5654)
2610 /** Process Verification Failure: Error querying debug port. */
2611 #define VERR_SUP_VP_NT_QI_PROCESS_DBG_PORT_ERROR (-5655)
2612 /** WinVerifyTrust failed with an unexpected status code when using the
2613 * catalog-file approach. */
2614 #define VERR_SUP_VP_WINTRUST_CAT_FAILURE (-5656)
2615 /** The image is required to be signed with the same certificate as the rest
2616 * of VirtualBox. */
2617 #define VERR_SUP_VP_NOT_SIGNED_WITH_BUILD_CERT (-5657)
2618 /** Internal processing error: Not build certificate. */
2619 #define VERR_SUP_VP_NOT_BUILD_CERT_IPE (-5658)
2620 /** The image requires to be signed using the kernel-code signing process. */
2621 #define VERR_SUP_VP_NOT_VALID_KERNEL_CODE_SIGNATURE (-5659)
2622 /** Unexpected number of valid paths. */
2623 #define VERR_SUP_VP_UNEXPECTED_VALID_PATH_COUNT (-5660)
2624 /** The image is required to force integrity checks. */
2625 #define VERR_SUP_VP_SIGNATURE_CHECKS_NOT_ENFORCED (-5661)
2626 /** Process Verification Failure: Symantec Endpoint Protection must be
2627 * disabled for the VirtualBox VM processes.
2628 * http://www.symantec.com/connect/articles/creating-application-control-exclusions-symantec-endpoint-protection-121 */
2629 #define VERR_SUP_VP_SYSFER_DLL (-5662)
2630 /** Process Purification Failure: KERNE32.DLL already mapped into the initial
2631 * process (suspended). */
2632 #define VERR_SUP_VP_KERNEL32_ALREADY_MAPPED (-5663)
2633 /** Process Purification Failure: NtFreeVirtualMemory failed on a chunk of
2634 * executable memory which shouldn't be present in the process. */
2635 #define VERR_SUP_VP_FREE_VIRTUAL_MEMORY_FAILED (-5664)
2636 /** Process Purification Failure: Both NtUnmapViewOfSetion and
2637 * NtProtectVirtualMemory failed to get rid of or passify an non-image
2638 * executable mapping. */
2639 #define VERR_SUP_VP_UNMAP_AND_PROTECT_FAILED (-5665)
2640 /** Process Purification Failure: Unknown memory type of executable memory. */
2641 #define VERR_SUP_VP_UNKOWN_MEM_TYPE (-5666)
2642 /** The image file is not owned by TrustedInstaller is it should be. */
2643 #define VERR_SUP_VP_NOT_OWNED_BY_TRUSTED_INSTALLER (-5667)
2644 /** The image is outside the expected range. */
2645 #define VERR_SUP_VP_IMAGE_TOO_BIG (-5668)
2646 /** Stub process not found so it cannot be revalidated when vboxdrv is opened
2647 * by the VM process. */
2648 #define VERR_SUP_VP_STUB_NOT_FOUND (-5669)
2649 /** Error opening the stub process for revalidation when vboxdrv is opened by
2650 * the VM process. */
2651 #define VERR_SUP_VP_STUB_OPEN_ERROR (-5670)
2652 /** Stub process thread not found during revalidation upon vboxdrv opening by
2653 * the VM process. */
2654 #define VERR_SUP_VP_STUB_THREAD_NOT_FOUND (-5671)
2655 /** Error opening the stub process thread for revalidation when vboxdrv is
2656 * opened by the VM process. */
2657 #define VERR_SUP_VP_STUB_THREAD_OPEN_ERROR (-5672)
2658 /** Process Purification Failure: NtAllocateVirtualMemory failed to get us
2659 * suitable replacement memory for a chunk of executable memory that
2660 * shouldn't be present in our process. (You will only see this message if you
2661 * got potentially fatally buggy anti-virus software installed.) */
2662 #define VERR_SUP_VP_REPLACE_VIRTUAL_MEMORY_FAILED (-5673)
2663 /** Error getting the file mode. */
2664 #define VERR_SUP_VP_FILE_MODE_ERROR (-5674)
2665 /** Error creating an event semaphore for used with asynchronous reads. */
2666 #define VERR_SUP_VP_CREATE_READ_EVT_SEM_FAILED (-5675)
2667 /** Undesirable module. */
2668 #define VERR_SUP_VP_UNDESIRABLE_MODULE (-5676)
2669
2670 /** @} */
2671
2672 /** @name VBox Extension Pack Status Codes
2673 * @{
2674 */
2675 /** The host is not supported. Uninstall the extension pack.
2676 * Returned by the VBOXEXTPACKREG::pfnInstalled. */
2677 #define VERR_EXTPACK_UNSUPPORTED_HOST_UNINSTALL (-6000)
2678 /** The VirtualBox version is not supported by one of the extension packs.
2679 *
2680 * You have probably upgraded VirtualBox recently. Please upgrade the
2681 * extension packs to versions compatible with this VirtualBox release.
2682 */
2683 #define VERR_EXTPACK_VBOX_VERSION_MISMATCH (-6001)
2684 /** @} */
2685
2686
2687 /** @name VBox Guest Control Status Codes
2688 * @{
2689 */
2690 /** Guest side reported an error. */
2691 #define VERR_GSTCTL_GUEST_ERROR (-6200)
2692 /** A guest control object has changed its overall status. */
2693 #define VWRN_GSTCTL_OBJECTSTATE_CHANGED 6220
2694 /** Guest process is in a wrong state. */
2695 #define VERR_GSTCTL_PROCESS_WRONG_STATE (-6221)
2696 /** Started guest process terminated with an exit code <> 0. */
2697 #define VWRN_GSTCTL_PROCESS_EXIT_CODE 6221
2698 /** @} */
2699
2700
2701 /** @name GIM Status Codes
2702 * @{
2703 */
2704 /** No GIM provider is configured for this VM. */
2705 #define VERR_GIM_NOT_ENABLED (-6300)
2706 /** GIM internal processing error \#1. */
2707 #define VERR_GIM_IPE_1 (-6301)
2708 /** GIM internal processing error \#2. */
2709 #define VERR_GIM_IPE_2 (-6302)
2710 /** GIM internal processing error \#3. */
2711 #define VERR_GIM_IPE_3 (-6303)
2712 /** The GIM provider does not support any paravirtualized TSC. */
2713 #define VERR_GIM_PVTSC_NOT_AVAILABLE (-6304)
2714 /** The guest has not setup use of the paravirtualized TSC. */
2715 #define VERR_GIM_PVTSC_NOT_ENABLED (-6305)
2716 /** Unknown or invalid GIM provider. */
2717 #define VERR_GIM_INVALID_PROVIDER (-6306)
2718 /** GIM generic operation failed. */
2719 #define VERR_GIM_OPERATION_FAILED (-6307)
2720 /** The GIM provider does not support any hypercalls. */
2721 #define VERR_GIM_HYPERCALLS_NOT_AVAILABLE (-6308)
2722 /** The guest has not setup use of the hypercalls. */
2723 #define VERR_GIM_HYPERCALLS_NOT_ENABLED (-6309)
2724 /** The GIM device is not registered with GIM when it ought to be. */
2725 #define VERR_GIM_DEVICE_NOT_REGISTERED (-6310)
2726 /** Hypercall cannot be enabled/performed due to access/permissions/CPL. */
2727 #define VERR_GIM_HYPERCALL_ACCESS_DENIED (-6311)
2728 /** Failed to read to a memory region while performing a hypercall. */
2729 #define VERR_GIM_HYPERCALL_MEMORY_READ_FAILED (-6312)
2730 /** Failed to write to a memory region while performing a hypercall. */
2731 #define VERR_GIM_HYPERCALL_MEMORY_WRITE_FAILED (-6313)
2732 /** Generic hypercall operation failure. */
2733 #define VERR_GIM_HYPERCALL_FAILED (-6314)
2734 /** No debug connection configured. */
2735 #define VERR_GIM_NO_DEBUG_CONNECTION (-6315)
2736 /** Return to ring-3 to perform the hypercall there. */
2737 #define VINF_GIM_R3_HYPERCALL 6316
2738 /** Continuing hypercall at the same RIP, continue guest execution. */
2739 #define VINF_GIM_HYPERCALL_CONTINUING 6317
2740 /** Instruction that triggers the hypercall is invalid/unrecognized. */
2741 #define VERR_GIM_INVALID_HYPERCALL_INSTR (-6318)
2742 /** @} */
2743
2744
2745 /** @name Main API Status Codes
2746 * @{
2747 */
2748 /** The configuration constructor in main failed due to a COM error. Check
2749 * the release log of the VM for further details. */
2750 #define VERR_MAIN_CONFIG_CONSTRUCTOR_COM_ERROR (-6400)
2751 /** The configuration constructor in main failed due to an internal consistency
2752 * error. Consult the release log of the VM for further details. */
2753 #define VERR_MAIN_CONFIG_CONSTRUCTOR_IPE (-6401)
2754 /** @} */
2755
2756
2757 /** @name VBox Drag and Drop Status Codes
2758 * @{
2759 */
2760 /** Guest side reported an error. */
2761 #define VERR_GSTDND_GUEST_ERROR (-6500)
2762 /** @} */
2763
2764
2765 /** @name Audio Status Codes
2766 * @{
2767 */
2768 /** Host backend couldn't be initialized. Happen if the audio server is not
2769 * reachable, audio hardware is not available or similar. We should use the
2770 * NULL audio driver. */
2771 #define VERR_AUDIO_BACKEND_INIT_FAILED (-6600)
2772 /** No free input streams. */
2773 #define VERR_AUDIO_NO_FREE_INPUT_STREAMS (-6601)
2774 /** No free output streams. */
2775 #define VERR_AUDIO_NO_FREE_OUTPUT_STREAMS (-6602)
2776 /** Pending stream disable operation in progress. */
2777 #define VERR_AUDIO_STREAM_PENDING_DISABLE (-6603)
2778 /** There is more data available.
2779 * This can happen due to a buffer wraparound of a buffer read/write operation. */
2780 #define VINF_AUDIO_MORE_DATA_AVAILABLE (6604)
2781 /** @} */
2782
2783
2784 /** @name APIC Status Codes
2785 * @{
2786 */
2787 /** No pending interrupt. */
2788 #define VERR_APIC_INTR_NOT_PENDING (-6700)
2789 /** Pending interrupt is masked by TPR. */
2790 #define VERR_APIC_INTR_MASKED_BY_TPR (-6701)
2791 /** APIC did not accept the interrupt. */
2792 #define VERR_APIC_INTR_DISCARDED (-6702)
2793 /** @} */
2794
2795 /* SED-END */
2796
2797 /** @} */
2798
2799
2800 #endif
2801