ArmPlatformPkg: Use SerialDxe in MdeModulePkg instead of EmbeddedPkg

[mirror_edk2.git] / ArmPlatformPkg / Library / PL011SerialPortLib / PL011SerialPortLib.c

diff --git a/ArmPlatformPkg/Library/PL011SerialPortLib/PL011SerialPortLib.c b/ArmPlatformPkg/Library/PL011SerialPortLib/PL011SerialPortLib.c
index d4f7fc96f6d4893dfe1c5592920bec443ede9fd5..7497b5eb7f19fbce6ef0bb7eda34a1b0a2b9ea69 100644 (file)
--- a/ArmPlatformPkg/Library/PL011SerialPortLib/PL011SerialPortLib.c
+++ b/ArmPlatformPkg/Library/PL011SerialPortLib/PL011SerialPortLib.c
@@ -2,7 +2,8 @@
   Serial I/O Port library functions with no library constructor/destructor\r
 \r
   Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.<BR>\r
   Serial I/O Port library functions with no library constructor/destructor\r
 \r
   Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.<BR>\r

-  Copyright (c) 2012 - 2013, ARM Ltd. All rights reserved.<BR>\r
+  Copyright (c) 2012 - 2014, ARM Ltd. All rights reserved.<BR>\r
+  Copyright (c) 2015, Intel Corporation. All rights reserved.<BR>\r

 \r
   This program and the accompanying materials\r
   are licensed and made available under the terms and conditions of the BSD License\r
 \r
   This program and the accompanying materials\r
   are licensed and made available under the terms and conditions of the BSD License\r


@@ -19,7 +20,6 @@
 #include <Library/IoLib.h>\r
 #include <Library/PcdLib.h>\r
 #include <Library/SerialPortLib.h>\r
 #include <Library/IoLib.h>\r
 #include <Library/PcdLib.h>\r
 #include <Library/SerialPortLib.h>\r

-#include <Library/SerialPortExtLib.h>\r

 \r
 #include <Drivers/PL011Uart.h>\r
 \r
 \r
 #include <Drivers/PL011Uart.h>\r
 \r


@@ -110,4 +110,117 @@ SerialPortPoll (
 {\r
   return PL011UartPoll ((UINTN)PcdGet64 (PcdSerialRegisterBase));\r
 }\r
 {\r
   return PL011UartPoll ((UINTN)PcdGet64 (PcdSerialRegisterBase));\r
 }\r

+/**\r
+  Set new attributes to PL011.\r
+\r
+  @param  BaudRate                The baud rate of the serial device. If the baud rate is not supported,\r
+                                  the speed will be reduced down to the nearest supported one and the\r
+                                  variable's value will be updated accordingly.\r
+  @param  ReceiveFifoDepth        The number of characters the device will buffer on input. If the specified\r
+                                  value is not supported, the variable's value will be reduced down to the\r
+                                  nearest supported one.\r
+  @param  Timeout                 If applicable, the number of microseconds the device will wait\r
+                                  before timing out a Read or a Write operation.\r
+  @param  Parity                  If applicable, this is the EFI_PARITY_TYPE that is computed or checked\r
+                                  as each character is transmitted or received. If the device does not\r
+                                  support parity, the value is the default parity value.\r
+  @param  DataBits                The number of data bits in each character\r
+  @param  StopBits                If applicable, the EFI_STOP_BITS_TYPE number of stop bits per character.\r
+                                  If the device does not support stop bits, the value is the default stop\r
+                                  bit value.\r
+\r
+  @retval EFI_SUCCESS             All attributes were set correctly on the serial device.\r
+  @retval EFI_INVALID_PARAMETERS  One or more of the attributes has an unsupported value.\r
+\r
+**/\r
+RETURN_STATUS\r
+EFIAPI\r
+SerialPortSetAttributes (\r
+  IN OUT UINT64              *BaudRate,\r
+  IN OUT UINT32              *ReceiveFifoDepth,\r
+  IN OUT UINT32              *Timeout,\r
+  IN OUT EFI_PARITY_TYPE     *Parity,\r
+  IN OUT UINT8               *DataBits,\r
+  IN OUT EFI_STOP_BITS_TYPE  *StopBits\r
+  )\r
+{\r
+  return PL011UartInitializePort (\r
+        (UINTN)PcdGet64 (PcdSerialRegisterBase),\r
+        BaudRate,\r
+        ReceiveFifoDepth,\r
+        Parity,\r
+        DataBits,\r
+        StopBits);\r
+}\r
+\r
+/**\r
+\r
+  Assert or deassert the control signals on a serial port.\r
+  The following control signals are set according their bit settings :\r
+  . Request to Send\r
+  . Data Terminal Ready\r
+\r
+  @param[in]  Control  The following bits are taken into account :\r
+                       . EFI_SERIAL_REQUEST_TO_SEND : assert/deassert the\r
+                         "Request To Send" control signal if this bit is\r
+                         equal to one/zero.\r
+                       . EFI_SERIAL_DATA_TERMINAL_READY : assert/deassert\r
+                         the "Data Terminal Ready" control signal if this\r
+                         bit is equal to one/zero.\r
+                       . EFI_SERIAL_HARDWARE_LOOPBACK_ENABLE : enable/disable\r
+                         the hardware loopback if this bit is equal to\r
+                         one/zero.\r
+                       . EFI_SERIAL_SOFTWARE_LOOPBACK_ENABLE : not supported.\r
+                       . EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE : enable/\r
+                         disable the hardware flow control based on CTS (Clear\r
+                         To Send) and RTS (Ready To Send) control signals.\r
+\r
+  @retval  RETURN_SUCCESS      The new control bits were set on the serial device.\r
+  @retval  RETURN_UNSUPPORTED  The serial device does not support this operation.\r
+\r
+**/\r
+RETURN_STATUS\r
+EFIAPI\r
+SerialPortSetControl (\r
+  IN UINT32  Control\r
+  )\r
+{\r
+  return PL011UartSetControl ((UINTN)PcdGet64 (PcdSerialRegisterBase), Control);\r
+}\r
+\r
+/**\r

 \r
 \r

+  Retrieve the status of the control bits on a serial device.\r
+\r
+  @param[out]  Control  Status of the control bits on a serial device :\r
+\r
+                        . EFI_SERIAL_DATA_CLEAR_TO_SEND, EFI_SERIAL_DATA_SET_READY,\r
+                          EFI_SERIAL_RING_INDICATE, EFI_SERIAL_CARRIER_DETECT,\r
+                          EFI_SERIAL_REQUEST_TO_SEND, EFI_SERIAL_DATA_TERMINAL_READY\r
+                          are all related to the DTE (Data Terminal Equipment) and\r
+                          DCE (Data Communication Equipment) modes of operation of\r
+                          the serial device.\r
+                        . EFI_SERIAL_INPUT_BUFFER_EMPTY : equal to one if the receive\r
+                          buffer is empty, 0 otherwise.\r
+                        . EFI_SERIAL_OUTPUT_BUFFER_EMPTY : equal to one if the transmit\r
+                          buffer is empty, 0 otherwise.\r
+                        . EFI_SERIAL_HARDWARE_LOOPBACK_ENABLE : equal to one if the\r
+                          hardware loopback is enabled (the output feeds the receive\r
+                          buffer), 0 otherwise.\r
+                        . EFI_SERIAL_SOFTWARE_LOOPBACK_ENABLE : equal to one if a\r
+                          loopback is accomplished by software, 0 otherwise.\r
+                        . EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE : equal to one if the\r
+                          hardware flow control based on CTS (Clear To Send) and RTS\r
+                          (Ready To Send) control signals is enabled, 0 otherwise.\r
+\r
+  @retval RETURN_SUCCESS  The control bits were read from the serial device.\r
+\r
+**/\r
+RETURN_STATUS\r
+EFIAPI\r
+SerialPortGetControl (\r
+  OUT UINT32  *Control\r
+  )\r
+{\r
+  return PL011UartGetControl ((UINTN)PcdGet64 (PcdSerialRegisterBase), Control);\r
+}\r