+ ## Specify Max ESRT cache entry number supported for FMP instances\r
+ #\r
+ # @Prompt Max FMP ESRT entry number to be synced & cached in repository.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdMaxFmpEsrtCacheNum|32|UINT32|0x0000006b\r
+\r
+ ## Specify Max ESRT cache entry number supported for Non FMP instances\r
+ #\r
+ # @Prompt Max Non-FMP ESRT entry number to be cached in repository.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdMaxNonFmpEsrtCacheNum|32|UINT32|0x0000006c\r
+\r
+ ## Specify of Capsule Flag defined by CapsuleGuid to request system reboot after capsule process\r
+ #\r
+ # @Prompt Flag to request system reboot after processing capsule.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSystemRebootAfterCapsuleProcessFlag|0x0001|UINT16|0x0000006d\r
+\r
+ ## Publish PropertiesTable or not.\r
+ #\r
+ # If this PCD is TRUE, DxeCore publishs PropertiesTable.\r
+ # DxeCore evaluates if all runtime drivers has 4K aligned PE sections. If all\r
+ # PE sections in runtime drivers are 4K aligned, DxeCore sets BIT0 in\r
+ # PropertiesTable. Or DxeCore clears BIT0 in PropertiesTable.\r
+ # If this PCD is FALSE, DxeCore does not publish PropertiesTable.\r
+ #\r
+ # If PropertiesTable has BIT0 set, DxeCore uses below policy in UEFI memory map:\r
+ # 1) Use EfiRuntimeServicesCode for runtime driver PE image code section and\r
+ # use EfiRuntimeServicesData for runtime driver PE image header and other section.\r
+ # 2) Set EfiRuntimeServicesCode to be EFI_MEMORY_RO.\r
+ # 3) Set EfiRuntimeServicesData to be EFI_MEMORY_XP.\r
+ # 4) Set EfiMemoryMappedIO and EfiMemoryMappedIOPortSpace to be EFI_MEMORY_XP.\r
+ #\r
+ # NOTE: Platform need gurantee this PCD is set correctly. Platform should set\r
+ # this PCD to be TURE if and only if all runtime driver has seperated Code/Data\r
+ # section. If PE code/data sections are merged, the result is unpredictable.\r
+ #\r
+ # UEFI 2.6 specification does not recommend to use this BIT0 attribute.\r
+ #\r
+ # @Prompt Publish UEFI PropertiesTable.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdPropertiesTableEnable|FALSE|BOOLEAN|0x0000006e\r
+\r
+ ## Default OEM ID for ACPI table creation, its length must be 0x6 bytes to follow ACPI specification.\r
+ # @Prompt Default OEM ID for ACPI table creation.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemId|"INTEL "|VOID*|0x30001034\r
+\r
+ ## Default OEM Table ID for ACPI table creation, it is "EDK2 ".\r
+ # According to ACPI specification, this field is particularly useful when\r
+ # defining a definition block to distinguish definition block functions.\r
+ # The OEM assigns each dissimilar table a new OEM Table ID.\r
+ # This PCD is ignored for definition block.\r
+ # @Prompt Default OEM Table ID for ACPI table creation.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemTableId|0x20202020324B4445|UINT64|0x30001035\r
+\r
+ ## Default OEM Revision for ACPI table creation.\r
+ # According to ACPI specification, for LoadTable() opcode, the OS can also\r
+ # check the OEM Table ID and Revision ID against a database for a newer\r
+ # revision Definition Block of the same OEM Table ID and load it instead.\r
+ # This PCD is ignored for definition block.\r
+ # @Prompt Default OEM Revision for ACPI table creation.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemRevision|0x00000002|UINT32|0x30001036\r
+\r
+ ## Default Creator ID for ACPI table creation.\r
+ # According to ACPI specification, for tables containing Definition Blocks,\r
+ # this is the ID for the ASL Compiler.\r
+ # This PCD is ignored for definition block.\r
+ # @Prompt Default Creator ID for ACPI table creation.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorId|0x20202020|UINT32|0x30001037\r
+\r
+ ## Default Creator Revision for ACPI table creation.\r
+ # According to ACPI specification, for tables containing Definition Blocks,\r
+ # this is the revision for the ASL Compiler.\r
+ # This PCD is ignored for definition block.\r
+ # @Prompt Default Creator Revision for ACPI table creation.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorRevision|0x01000013|UINT32|0x30001038\r
+\r
+ ## Indicates if to set NX for stack.<BR><BR>\r
+ # For the DxeIpl and the DxeCore are both X64, set NX for stack feature also require PcdDxeIplBuildPageTables be TRUE.<BR>\r
+ # For the DxeIpl and the DxeCore are both IA32 (PcdDxeIplSwitchToLongMode is FALSE), set NX for stack feature also require\r
+ # IA32 PAE is supported and Execute Disable Bit is available.<BR>\r
+ # TRUE - to set NX for stack.<BR>\r
+ # FALSE - Not to set NX for stack.<BR>\r
+ # @Prompt Set NX for stack.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSetNxForStack|FALSE|BOOLEAN|0x0001006f\r
+\r
+ ## This PCD specifies the PCI-based SD/MMC host controller mmio base address.\r
+ # Define the mmio base address of the pci-based SD/MMC host controller. If there are multiple SD/MMC\r
+ # host controllers, their mmio base addresses are calculated one by one from this base address.\r
+ # @Prompt Mmio base address of pci-based SD/MMC host controller.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSdMmcPciHostControllerMmioBase|0xd0000000|UINT32|0x30001043\r
+\r
+ ## Indicates if ACPI S3 will be enabled.<BR><BR>\r
+ # TRUE - ACPI S3 will be enabled.<BR>\r
+ # FALSE - ACPI S3 will be disabled.<BR>\r
+ # @Prompt ACPI S3 Enable.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiS3Enable|TRUE|BOOLEAN|0x01100000\r
+\r
+ ## Specify memory size for boot script executor stack usage in S3 phase.\r
+ # The default size 32K. When changing the value make sure the memory size is large enough \r
+ # to meet boot script executor requirement in the S3 phase.\r
+ # @Prompt Reserved S3 Boot Script Stack ACPI Memory Size\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptStackSize|0x8000|UINT32|0x02000000\r
+\r
+ ## Indicates if to use the optimized timing for best PS2 detection performance.\r
+ # Note this PCD could be set to TRUE for best boot performance and set to FALSE for best device compatibility.<BR><BR>\r
+ # TRUE - Use the optimized timing for best PS2 detection performance.<BR>\r
+ # FALSE - Use the normal timing to detect PS2.<BR>\r
+ # @Prompt Enable fast PS2 detection\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFastPS2Detection|FALSE|BOOLEAN|0x30001044\r
+\r
+ ## This is recover file name in PEI phase.\r
+ # The file must be in the root directory.\r
+ # The file name must be the 8.3 format.\r
+ # The PCD data must be in UNICODE format.\r
+ # @Prompt Recover file name in PEI phase\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryFileName|L"FVMAIN.FV"|VOID*|0x30001045\r
+\r
+ ## This PCD hold a list GUIDs for the ImageTypeId to indicate the\r
+ # FMP capsule is a system FMP.\r
+ # @Prompt A list of system FMP ImageTypeId GUIDs\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSystemFmpCapsuleImageTypeIdGuid|{0x0}|VOID*|0x30001046\r
+\r
+ ## This PCD holds the address mask for page table entries when memory encryption is\r
+ # enabled on AMD processors supporting the Secure Encrypted Virtualization (SEV) feature.\r
+ # This mask should be applied when creating 1:1 virtual to physical mapping tables.\r
+ # @Prompt The address mask when memory encryption is enabled.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdPteMemoryEncryptionAddressOrMask|0x0|UINT64|0x30001047\r
+\r