+footnote:[Looking Glass: https://looking-glass.io/] project, which enables high
+performance, low-latency display mirroring between host and guest.
+
+[[qm_audio_device]]
+Audio Device
+~~~~~~~~~~~~
+
+To add an audio device run the following command:
+
+----
+qm set <vmid> -audio0 device=<device>
+----
+
+Supported audio devices are:
+
+* `ich9-intel-hda`: Intel HD Audio Controller, emulates ICH9
+* `intel-hda`: Intel HD Audio Controller, emulates ICH6
+* `AC97`: Audio Codec '97, useful for older operating systems like Windows XP
+
+There are two backends available:
+
+* 'spice'
+* 'none'
+
+The 'spice' backend can be used in combination with xref:qm_display[SPICE] while
+the 'none' backend can be useful if an audio device is needed in the VM for some
+software to work. To use the physical audio device of the host use device
+passthrough (see xref:qm_pci_passthrough[PCI Passthrough] and
+xref:qm_usb_passthrough[USB Passthrough]). Remote protocols like Microsoft’s RDP
+have options to play sound.
+
+
+[[qm_virtio_rng]]
+VirtIO RNG
+~~~~~~~~~~
+
+A RNG (Random Number Generator) is a device providing entropy ('randomness') to
+a system. A virtual hardware-RNG can be used to provide such entropy from the
+host system to a guest VM. This helps to avoid entropy starvation problems in
+the guest (a situation where not enough entropy is available and the system may
+slow down or run into problems), especially during the guests boot process.
+
+To add a VirtIO-based emulated RNG, run the following command:
+
+----
+qm set <vmid> -rng0 source=<source>[,max_bytes=X,period=Y]
+----
+
+`source` specifies where entropy is read from on the host and has to be one of
+the following:
+
+* `/dev/urandom`: Non-blocking kernel entropy pool (preferred)
+* `/dev/random`: Blocking kernel pool (not recommended, can lead to entropy
+ starvation on the host system)
+* `/dev/hwrng`: To pass through a hardware RNG attached to the host (if multiple
+ are available, the one selected in
+ `/sys/devices/virtual/misc/hw_random/rng_current` will be used)
+
+A limit can be specified via the `max_bytes` and `period` parameters, they are
+read as `max_bytes` per `period` in milliseconds. However, it does not represent
+a linear relationship: 1024B/1000ms would mean that up to 1 KiB of data becomes
+available on a 1 second timer, not that 1 KiB is streamed to the guest over the
+course of one second. Reducing the `period` can thus be used to inject entropy
+into the guest at a faster rate.
+
+By default, the limit is set to 1024 bytes per 1000 ms (1 KiB/s). It is
+recommended to always use a limiter to avoid guests using too many host
+resources. If desired, a value of '0' for `max_bytes` can be used to disable
+all limits.
+
+[[qm_bootorder]]
+Device Boot Order
+~~~~~~~~~~~~~~~~~
+
+QEMU can tell the guest which devices it should boot from, and in which order.
+This can be specified in the config via the `boot` property, e.g.:
+
+----
+boot: order=scsi0;net0;hostpci0
+----
+
+[thumbnail="screenshot/gui-qemu-edit-bootorder.png"]
+
+This way, the guest would first attempt to boot from the disk `scsi0`, if that
+fails, it would go on to attempt network boot from `net0`, and in case that
+fails too, finally attempt to boot from a passed through PCIe device (seen as
+disk in case of NVMe, otherwise tries to launch into an option ROM).
+
+On the GUI you can use a drag-and-drop editor to specify the boot order, and use
+the checkbox to enable or disable certain devices for booting altogether.
+
+NOTE: If your guest uses multiple disks to boot the OS or load the bootloader,
+all of them must be marked as 'bootable' (that is, they must have the checkbox
+enabled or appear in the list in the config) for the guest to be able to boot.
+This is because recent SeaBIOS and OVMF versions only initialize disks if they
+are marked 'bootable'.
+
+In any case, even devices not appearing in the list or having the checkmark
+disabled will still be available to the guest, once it's operating system has
+booted and initialized them. The 'bootable' flag only affects the guest BIOS and
+bootloader.
+