ArmMtlLib|ArmPlatformPkg/Include/Library/ArmMtlLib.h\r
ArmSvcLib|Include/Library/ArmSvcLib.h\r
OpteeLib|Include/Library/OpteeLib.h\r
+ StandaloneMmMmuLib|Include/Library/StandaloneMmMmuLib.h\r
\r
[Guids.common]\r
gArmTokenSpaceGuid = { 0xBB11ECFE, 0x820F, 0x4968, { 0xBB, 0xA6, 0xF7, 0x6A, 0xFE, 0x30, 0x25, 0x96 } }\r
## Arm System Control and Management Interface(SCMI) Clock management protocol\r
## ArmPkg/Include/Protocol/ArmScmiClockProtocol.h\r
gArmScmiClockProtocolGuid = { 0x91ce67a8, 0xe0aa, 0x4012, { 0xb9, 0x9f, 0xb6, 0xfc, 0xf3, 0x4, 0x8e, 0xaa } }\r
+ gArmScmiClock2ProtocolGuid = { 0xb8d8caf2, 0x9e94, 0x462c, { 0xa8, 0x34, 0x6c, 0x99, 0xfc, 0x05, 0xef, 0xcf } }\r
\r
## Arm System Control and Management Interface(SCMI) Clock management protocol\r
## ArmPkg/Include/Protocol/ArmScmiPerformanceProtocol.h\r
# it has been configured by the CPU DXE\r
gArmTokenSpaceGuid.PcdDebuggerExceptionSupport|FALSE|BOOLEAN|0x00000032\r
\r
- # Define if the spin-table mechanism is used by the secondary cores when booting\r
- # Linux (instead of PSCI)\r
- gArmTokenSpaceGuid.PcdArmLinuxSpinTable|FALSE|BOOLEAN|0x00000033\r
-\r
# Define if the GICv3 controller should use the GICv2 legacy\r
gArmTokenSpaceGuid.PcdArmGicV3WithV2Legacy|FALSE|BOOLEAN|0x00000042\r
\r
# By default we do not do a transition to non-secure mode\r
gArmTokenSpaceGuid.PcdArmNonSecModeTransition|0x0|UINT32|0x0000003E\r
\r
- # The Linux ATAGs are expected to be under 0x4000 (16KB) from the beginning of the System Memory\r
- gArmTokenSpaceGuid.PcdArmLinuxAtagMaxOffset|0x4000|UINT32|0x00000020\r
-\r
- # If the fixed FDT address is not available, then it should be loaded below the kernel.\r
- # The recommendation from the Linux kernel is to have the FDT below 16KB.\r
- # (see the kernel doc: Documentation/arm/Booting)\r
- gArmTokenSpaceGuid.PcdArmLinuxFdtMaxOffset|0x4000|UINT32|0x00000023\r
- # The FDT blob must be loaded at a 64bit aligned address.\r
- gArmTokenSpaceGuid.PcdArmLinuxFdtAlignment|0x8|UINT32|0x00000026\r
-\r
# Non Secure Access Control Register\r
# - BIT15 : NSASEDIS - Disable Non-secure Advanced SIMD functionality\r
# - BIT14 : NSD32DIS - Disable Non-secure use of D16-D31\r
# Other modes include using SP0 or switching to Aarch32, but these are\r
# not currently supported.\r
gArmTokenSpaceGuid.PcdArmNonSecModeTransition|0x3c9|UINT32|0x0000003E\r
- # If the fixed FDT address is not available, then it should be loaded above the kernel.\r
- # The recommendation from the AArch64 Linux kernel is to have the FDT below 512MB.\r
- # (see the kernel doc: Documentation/arm64/booting.txt)\r
- gArmTokenSpaceGuid.PcdArmLinuxFdtMaxOffset|0x20000000|UINT32|0x00000023\r
- # The FDT blob must be loaded at a 2MB aligned address.\r
- gArmTokenSpaceGuid.PcdArmLinuxFdtAlignment|0x00200000|UINT32|0x00000026\r
\r
\r
#\r