+@REM @file\r
+@REM This stand-alone program is typically called by the edksetup.bat file,\r
+@REM however it may be executed directly from the BaseTools project folder\r
+@REM if the file is not executed within a WORKSPACE\BaseTools folder.\r
@REM\r
-@REM Copyright (c) 2006, Intel Corporation\r
-@REM All rights reserved. This program and the accompanying materials\r
-@REM are licensed and made available under the terms and conditions of the BSD License\r
-@REM which accompanies this distribution. The full text of the license may be found at\r
-@REM http://opensource.org/licenses/bsd-license.php\r
+@REM Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>\r
+@REM (C) Copyright 2016 Hewlett Packard Enterprise Development LP<BR>\r
+@REM\r
+@REM This program and the accompanying materials are licensed and made available\r
+@REM under the terms and conditions of the BSD License which accompanies this\r
+@REM distribution. The full text of the license may be found at:\r
+@REM http://opensource.org/licenses/bsd-license.php\r
@REM\r
@REM THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
-@REM WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
+@REM WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR\r
+@REM IMPLIED.\r
@REM\r
\r
@echo off\r
+pushd .\r
\r
-REM ##############################################################\r
-REM # You should not have to modify anything below this line\r
-REM #\r
+@REM ##############################################################\r
+@REM # You should not have to modify anything below this line\r
+@REM #\r
\r
-if /I "%1"=="-h" goto usage\r
-if /I "%1"=="-help" goto usage\r
-if /I "%1"=="--help" goto usage\r
-if /I "%1"=="/h" goto usage\r
-if /I "%1"=="/?" goto usage\r
-if /I "%1"=="/help" goto usage\r
+if /I "%1"=="-h" goto Usage\r
+if /I "%1"=="-help" goto Usage\r
+if /I "%1"=="--help" goto Usage\r
+if /I "%1"=="/h" goto Usage\r
+if /I "%1"=="/help" goto Usage\r
+if /I "%1"=="/?" goto Usage\r
\r
-if /I "%1"=="Reconfig" (\r
- if NOT "%2"=="" set EDK_TOOLS_PATH=%2\r
-) else (\r
- if NOT "%1"=="" set EDK_TOOLS_PATH=%1\r
-)\r
\r
-REM\r
-REM Check the required system environment variables\r
-REM\r
+:loop\r
+ if "%1"=="" goto setup_workspace\r
+ if /I "%1"=="--nt32" (\r
+ if /I "%2" == "X64" (\r
+ shift\r
+ )\r
+ @REM Ignore --nt32 flag\r
+ shift\r
+ goto loop\r
+ )\r
+ if /I "%1"=="Reconfig" (\r
+ shift\r
+ set RECONFIG=TRUE\r
+ goto loop\r
+ )\r
+ if /I "%1"=="Rebuild" (\r
+ shift\r
+ set REBUILD=TRUE\r
+ goto loop\r
+ )\r
+ if /I "%1"=="ForceRebuild" (\r
+ shift\r
+ set FORCE_REBUILD=TRUE\r
+ goto loop\r
+ )\r
+ if "%1"=="" goto setup_workspace\r
+ if exist %1 (\r
+ if not defined BASE_TOOLS_PATH (\r
+ if exist %1\Source set BASE_TOOLS_PATH=%1\r
+ shift\r
+ goto loop\r
+ )\r
+ if not defined EDK_TOOLS_PATH (\r
+ if exist %1\Bin\Win32 set EDK_TOOLS_PATH=%1\r
+ shift\r
+ goto loop\r
+ )\r
+ echo.\r
+ echo !!! ERROR !!! Unknown argument, %1 !!!\r
+ echo.\r
+ goto end\r
+ ) else (\r
+ echo.\r
+ echo !!! ERROR !!! Unknown argument, %1 !!!\r
+ echo.\r
+ goto end\r
+ )\r
+ goto loop\r
+\r
+\r
+@REM\r
+@REM Check the required system environment variables\r
+@REM\r
\r
:setup_workspace\r
+ REM\r
+ REM check the EDK_TOOLS_PATH\r
+ REM\r
+ if not defined EDK_TOOLS_PATH goto no_EDK_TOOLS_PATH\r
+ if exist %EDK_TOOLS_PATH% goto set_PATH\r
+\r
+:no_EDK_TOOLS_PATH\r
+ if not defined WORKSPACE (\r
+ if defined BASE_TOOLS_PATH (\r
+ set EDK_TOOLS_PATH=%BASE_TOOLS_PATH%\r
+ goto set_PATH\r
+ ) else (\r
+ echo.\r
+ echo !!! ERROR !!! Neither BASE_TOOLS_PATH nor EDK_TOOLS_PATH are set. !!!\r
+ echo.\r
+ goto end\r
+ )\r
+ ) else (\r
+ if exist %WORKSPACE%\BaseTools\Bin (\r
+ set EDK_TOOLS_PATH=%WORKSPACE%\BaseTools\r
+ goto set_PATH\r
+ ) else (\r
+ echo.\r
+ echo !!! ERROR !!! No tools path available. Please set EDK_TOOLS_PATH !!!\r
+ echo.\r
+ goto end\r
+ )\r
+ )\r
+\r
+:set_PATH\r
+ if defined WORKSPACE_TOOLS_PATH goto check_PATH\r
+ if not defined EDK_TOOLS_BIN (\r
+ set EDK_TOOLS_BIN=%EDK_TOOLS_PATH%\Bin\Win32\r
+ if not exist %EDK_TOOLS_PATH%\Bin\Win32 (\r
+ echo.\r
+ echo !!! ERROR !!! Cannot find BaseTools Bin Win32!!!\r
+ echo Please check the directory %EDK_TOOLS_PATH%\Bin\Win32\r
+ echo Or configure EDK_TOOLS_BIN env to point Win32 directory.\r
+ echo.\r
+ )\r
+ )\r
+ set PATH=%EDK_TOOLS_BIN%;%PATH%\r
+ set WORKSPACE_TOOLS_PATH=%EDK_TOOLS_PATH%\r
+ goto PATH_ok\r
+\r
+:check_PATH\r
+ if "%EDK_TOOLS_PATH%"=="%WORKSPACE_TOOLS_PATH%" goto PATH_ok\r
+ if not defined EDK_TOOLS_BIN (\r
+ set EDK_TOOLS_BIN=%EDK_TOOLS_PATH%\Bin\Win32\r
+ if not exist %EDK_TOOLS_PATH%\Bin\Win32 (\r
+ echo.\r
+ echo !!! ERROR !!! Cannot find BaseTools Bin Win32!!!\r
+ echo Please check the directory %EDK_TOOLS_PATH%\Bin\Win32\r
+ echo Or configure EDK_TOOLS_BIN env to point Win32 directory.\r
+ echo.\r
+ )\r
+ )\r
+ set PATH=%EDK_TOOLS_BIN%;%PATH%\r
+ set WORKSPACE_TOOLS_PATH=%EDK_TOOLS_PATH%\r
+ echo Resetting the PATH variable to include the EDK_TOOLS_PATH for this session.\r
+\r
+:PATH_ok\r
REM\r
-REM check the EDK_TOOLS_PATH\r
+REM copy *.template to %CONF_PATH%\r
REM\r
-if not defined EDK_TOOLS_PATH goto no_tools_path\r
-if exist %EDK_TOOLS_PATH% goto set_path\r
-echo.\r
-echo !!!WARNING!!! %EDK_TOOLS_PATH% doesn't exist. %WORKSPACE%\BaseTools will be used !!!\r
-echo.\r
+if not defined WORKSPACE (\r
+ if defined RECONFIG (\r
+ echo.\r
+ echo !!! WARNING !!! WORKSPACE environment variable was not set, cannot Reconfig !!!\r
+ echo.\r
+ )\r
+ goto skip_reconfig\r
+)\r
\r
-:no_tools_path\r
-if exist %WORKSPACE%\BaseTools (\r
- set EDK_TOOLS_PATH=%WORKSPACE%\BaseTools\r
-) else (\r
- echo.\r
- echo !!!WARNING!!! No tools path found. Please set EDK_TOOLS_PATH !!!\r
- echo.\r
+IF NOT exist "%EDK_TOOLS_PATH%\set_vsprefix_envs.bat" (\r
+ @echo.\r
+ @echo !!! ERROR !!! The set_vsprefix_envs.bat was not found !!!\r
+ @echo.\r
goto end\r
)\r
+call %EDK_TOOLS_PATH%\set_vsprefix_envs.bat\r
\r
-:set_path\r
-if defined WORKSPACE_TOOLS_PATH goto check_path\r
-set PATH=%EDK_TOOLS_PATH%\Bin;%EDK_TOOLS_PATH%\Bin\Win32;%PATH%\r
-set WORKSPACE_TOOLS_PATH=%EDK_TOOLS_PATH%\r
-goto path_ok\r
-\r
-:check_path\r
-if "%EDK_TOOLS_PATH%"=="%WORKSPACE_TOOLS_PATH%" goto path_ok\r
-set PATH=%EDK_TOOLS_PATH%\Bin;%EDK_TOOLS_PATH%\Bin\Win32;%PATH%\r
-set WORKSPACE_TOOLS_PATH=%EDK_TOOLS_PATH%\r
-echo Resetting the PATH variable to include the EDK_TOOLS_PATH for this WORKSPACE\r
+if not defined CONF_PATH (\r
+ set CONF_PATH=%WORKSPACE%\Conf\r
+)\r
\r
-:path_ok\r
-echo PATH = %PATH%\r
-echo.\r
-echo WORKSPACE = %WORKSPACE%\r
-echo EDK_TOOLS_PATH = %EDK_TOOLS_PATH%\r
-echo.\r
+if NOT exist %CONF_PATH% (\r
+ if defined PACKAGES_PATH (\r
+ for %%i IN (%PACKAGES_PATH%) DO (\r
+ if exist %%~fi\Conf (\r
+ set CONF_PATH=%%i\Conf\r
+ goto CopyConf\r
+ )\r
+ )\r
+ )\r
+)\r
\r
-REM\r
-REM copy *.template to %WORKSPACE%\Conf\r
-REM\r
-if NOT exist %WORKSPACE%\Conf (\r
- mkdir %WORKSPACE%\Conf\r
+:CopyConf\r
+if NOT exist %CONF_PATH% (\r
+ mkdir %CONF_PATH%\r
) else (\r
- if /I "%1"=="Reconfig" (\r
+ if defined RECONFIG (\r
echo.\r
- echo Over-writing the files in the WORKSPACE\Conf directory\r
+ echo Over-writing the files in the CONF_PATH directory\r
echo using the default template files\r
echo.\r
)\r
)\r
-if NOT exist %WORKSPACE%\Conf\FrameworkDatabase.db (\r
- echo copying ... FrameworkDatabase.template to %WORKSPACE%\Conf\FrameworkDatabase.db\r
- copy %EDK_TOOLS_PATH%\Conf\FrameworkDatabase.template %WORKSPACE%\Conf\FrameworkDatabase.db > nul\r
+\r
+if NOT exist %CONF_PATH%\target.txt (\r
+ echo copying ... target.template to %CONF_PATH%\target.txt\r
+ if NOT exist %EDK_TOOLS_PATH%\Conf\target.template (\r
+ echo Error: target.template is missing at folder %EDK_TOOLS_PATH%\Conf\\r
+ )\r
+ copy %EDK_TOOLS_PATH%\Conf\target.template %CONF_PATH%\target.txt > nul\r
) else (\r
- if /I "%1"=="Reconfig" copy /Y %EDK_TOOLS_PATH%\Conf\FrameworkDatabase.template %WORKSPACE%\Conf\FrameworkDatabase.db > nul\r
+ if defined RECONFIG echo over-write ... target.template to %CONF_PATH%\target.txt\r
+ if defined RECONFIG copy /Y %EDK_TOOLS_PATH%\Conf\target.template %CONF_PATH%\target.txt > nul\r
)\r
-if NOT exist %WORKSPACE%\Conf\target.txt (\r
- echo copying ... target.template to %WORKSPACE%\Conf\target.txt\r
- copy %EDK_TOOLS_PATH%\Conf\target.template %WORKSPACE%\Conf\target.txt > nul\r
+\r
+if NOT exist %CONF_PATH%\tools_def.txt (\r
+ echo copying ... tools_def.template to %CONF_PATH%\tools_def.txt\r
+ if NOT exist %EDK_TOOLS_PATH%\Conf\tools_def.template (\r
+ echo Error: tools_def.template is missing at folder %EDK_TOOLS_PATH%\Conf\\r
+ )\r
+ copy %EDK_TOOLS_PATH%\Conf\tools_def.template %CONF_PATH%\tools_def.txt > nul\r
) else (\r
- if /I "%1"=="Reconfig" copy /Y %EDK_TOOLS_PATH%\Conf\target.template %WORKSPACE%\Conf\target.txt > nul\r
+ if defined RECONFIG echo over-write ... tools_def.template to %CONF_PATH%\tools_def.txt\r
+ if defined RECONFIG copy /Y %EDK_TOOLS_PATH%\Conf\tools_def.template %CONF_PATH%\tools_def.txt > nul\r
)\r
-if NOT exist %WORKSPACE%\Conf\tools_def.txt (\r
- echo copying ... tools_def.template to %WORKSPACE%\Conf\tools_def.txt\r
- copy %EDK_TOOLS_PATH%\Conf\tools_def.template %WORKSPACE%\Conf\tools_def.txt > nul\r
+\r
+if NOT exist %CONF_PATH%\build_rule.txt (\r
+ echo copying ... build_rule.template to %CONF_PATH%\build_rule.txt\r
+ if NOT exist %EDK_TOOLS_PATH%\Conf\build_rule.template (\r
+ echo Error: build_rule.template is missing at folder %EDK_TOOLS_PATH%\Conf\\r
+ )\r
+ copy %EDK_TOOLS_PATH%\Conf\build_rule.template %CONF_PATH%\build_rule.txt > nul\r
) else (\r
- if /I "%1"=="Reconfig" copy /Y %EDK_TOOLS_PATH%\Conf\tools_def.template %WORKSPACE%\Conf\tools_def.txt > nul\r
+ if defined RECONFIG echo over-write ... build_rule.template to %CONF_PATH%\build_rule.txt\r
+ if defined RECONFIG copy /Y %EDK_TOOLS_PATH%\Conf\build_rule.template %CONF_PATH%\build_rule.txt > nul\r
)\r
-if NOT exist %WORKSPACE%\Conf\build_rule.txt (\r
- echo copying ... build_rule.template to %WORKSPACE%\Conf\build_rule.txt\r
- copy %EDK_TOOLS_PATH%\Conf\build_rule.template %WORKSPACE%\Conf\build_rule.txt > nul\r
-) else (\r
- if /I "%1"=="Reconfig" copy /Y %EDK_TOOLS_PATH%\Conf\build_rule.template %WORKSPACE%\Conf\build_rule.txt > nul\r
+\r
+echo PATH = %PATH%\r
+echo.\r
+if defined WORKSPACE (\r
+ echo WORKSPACE = %WORKSPACE%\r
+)\r
+if defined PACKAGES_PATH (\r
+ echo PACKAGES_PATH = %PACKAGES_PATH%\r
)\r
+echo EDK_TOOLS_PATH = %EDK_TOOLS_PATH%\r
+if defined BASE_TOOLS_PATH (\r
+ echo BASE_TOOLS_PATH = %BASE_TOOLS_PATH%\r
+)\r
+if defined EDK_TOOLS_BIN (\r
+ echo EDK_TOOLS_BIN = %EDK_TOOLS_BIN%\r
+)\r
+echo CONF_PATH = %CONF_PATH%\r
+echo.\r
\r
-REM\r
-REM copy XMLSchema to %EDK_TOOLS_PATH%\Conf\XMLSchema\r
-REM\r
-REM echo copying ... XMLSchema to %EDK_TOOLS_PATH%\Conf\XMLSchema\r
-REM xcopy %WORKSPACE%\Conf\XMLSchema %EDK_TOOLS_PATH%\Conf\XMLSchema /S /I /D /F /Q > nul\r
+:skip_reconfig\r
\r
-REM\r
-REM Done!!!\r
-REM\r
-goto end\r
+@REM\r
+@REM Test if we are going to have to do a build\r
+@REM\r
+if defined FORCE_REBUILD goto check_build_environment\r
+if defined REBUILD goto check_build_environment\r
+if not exist "%EDK_TOOLS_PATH%" goto check_build_environment\r
+if not exist "%EDK_TOOLS_BIN%" goto check_build_environment\r
\r
-:usage\r
-echo.\r
-echo "Usage: %0 [/? | /h | /help | -h | -help | --help] [Reconfig] [tools_path]"\r
+IF NOT EXIST "%EDK_TOOLS_BIN%\EfiRom.exe" goto check_c_tools\r
+IF NOT EXIST "%EDK_TOOLS_BIN%\GenFfs.exe" goto check_c_tools\r
+IF NOT EXIST "%EDK_TOOLS_BIN%\GenFv.exe" goto check_c_tools\r
+IF NOT EXIST "%EDK_TOOLS_BIN%\GenFw.exe" goto check_c_tools\r
+IF NOT EXIST "%EDK_TOOLS_BIN%\GenSec.exe" goto check_c_tools\r
+IF NOT EXIST "%EDK_TOOLS_BIN%\Split.exe" goto check_c_tools\r
+IF NOT EXIST "%EDK_TOOLS_BIN%\TianoCompress.exe" goto check_c_tools\r
+IF NOT EXIST "%EDK_TOOLS_BIN%\VfrCompile.exe" goto check_c_tools\r
+IF NOT EXIST "%EDK_TOOLS_BIN%\VolInfo.exe" goto check_c_tools\r
+\r
+goto check_build_environment\r
+\r
+:check_c_tools\r
+ echo.\r
+ echo !!! ERROR !!! Binary C tools are missing. They are required to be built from BaseTools Source.\r
+ echo.\r
+\r
+:check_build_environment\r
+ set PYTHONHASHSEED=1\r
+\r
+ if not defined BASE_TOOLS_PATH (\r
+ if not exist "Source\C\Makefile" (\r
+ if not exist "%EDK_TOOLS_PATH%\Source\C\Makefile" goto no_source_files\r
+ set BASE_TOOLS_PATH=%EDK_TOOLS_PATH%\r
+ ) else (\r
+ set BASE_TOOLS_PATH=%CD%\r
+ )\r
+ )\r
+\r
+:defined_python\r
+if defined PYTHON_COMMAND if not defined PYTHON3_ENABLE (\r
+ goto check_python_available\r
+)\r
+if defined PYTHON3_ENABLE (\r
+ if "%PYTHON3_ENABLE%" EQU "TRUE" (\r
+ set PYTHON_COMMAND=py -3\r
+ goto check_python_available\r
+ ) else (\r
+ goto check_python2\r
+ )\r
+)\r
+if not defined PYTHON_COMMAND if not defined PYTHON3_ENABLE (\r
+ set PYTHON_COMMAND=py -3\r
+ py -3 %BASE_TOOLS_PATH%\Tests\PythonTest.py >PythonCheck.txt 2>&1\r
+ setlocal enabledelayedexpansion\r
+ set /p PythonCheck=<"PythonCheck.txt"\r
+ del PythonCheck.txt\r
+ if "!PythonCheck!" NEQ "TRUE" (\r
+ if not defined PYTHON_HOME if not defined PYTHONHOME (\r
+ endlocal\r
+ set PYTHON_COMMAND=\r
+ echo.\r
+ echo !!! ERROR !!! Binary python tools are missing.\r
+ echo PYTHON_COMMAND, PYTHON3_ENABLE or PYTHON_HOME\r
+ echo Environment variable is not set successfully.\r
+ echo They is required to build or execute the python tools.\r
+ echo.\r
+ goto end\r
+ ) else (\r
+ goto check_python2\r
+ )\r
+ ) else (\r
+ goto check_freezer_path\r
+ )\r
+)\r
+\r
+:check_python2\r
+endlocal\r
+if defined PYTHON_HOME (\r
+ if EXIST "%PYTHON_HOME%" (\r
+ set PYTHON_COMMAND=%PYTHON_HOME%\python.exe\r
+ goto check_python_available\r
+ )\r
+)\r
+if defined PYTHONHOME (\r
+ if EXIST "%PYTHONHOME%" (\r
+ set PYTHON_HOME=%PYTHONHOME%\r
+ set PYTHON_COMMAND=%PYTHON_HOME%\python.exe\r
+ goto check_python_available\r
+ )\r
+)\r
echo.\r
-echo tools_path Tools' path. EDK_TOOLS_PATH will be set to this path.\r
+echo !!! ERROR !!! PYTHON_HOME is not defined or The value of this variable does not exist\r
echo.\r
+goto end\r
+:check_python_available\r
+%PYTHON_COMMAND% %BASE_TOOLS_PATH%\Tests\PythonTest.py >PythonCheck.txt 2>&1\r
+ setlocal enabledelayedexpansion\r
+ set /p PythonCheck=<"PythonCheck.txt"\r
+ del PythonCheck.txt\r
+ if "!PythonCheck!" NEQ "TRUE" (\r
+ echo.\r
+ echo ! ERROR ! "%PYTHON_COMMAND%" is not installed or added to environment variables\r
+ echo.\r
+ goto end\r
+ ) else (\r
+ goto check_freezer_path\r
+ )\r
+\r
+:check_freezer_path\r
+ endlocal\r
+ if defined BASETOOLS_PYTHON_SOURCE goto print_python_info\r
+ set "PATH=%BASE_TOOLS_PATH%\BinWrappers\WindowsLike;%PATH%"\r
+ set BASETOOLS_PYTHON_SOURCE=%BASE_TOOLS_PATH%\Source\Python\r
+ set PYTHONPATH=%BASETOOLS_PYTHON_SOURCE%;%PYTHONPATH%\r
+\r
+:print_python_info\r
+ echo PATH = %PATH%\r
+ if defined PYTHON3_ENABLE if "%PYTHON3_ENABLE%" EQU "TRUE" (\r
+ echo PYTHON3_ENABLE = %PYTHON3_ENABLE%\r
+ echo PYTHON3 = %PYTHON_COMMAND%\r
+ ) else (\r
+ echo PYTHON3_ENABLE = FALSE\r
+ echo PYTHON_COMMAND = %PYTHON_COMMAND%\r
+ )\r
+ echo PYTHONPATH = %PYTHONPATH%\r
+ echo.\r
+\r
+:VisualStudioAvailable\r
+ if not defined FORCE_REBUILD (\r
+ if not defined REBUILD (\r
+ goto end\r
+ )\r
+ )\r
+ call "%EDK_TOOLS_PATH%\get_vsvars.bat"\r
+ if not defined VCINSTALLDIR (\r
+ @echo.\r
+ @echo !!! ERROR !!!! Cannot find Visual Studio, required to build C tools !!!\r
+ @echo.\r
+ goto end\r
+ )\r
+ if not defined FORCE_REBUILD goto IncrementalBuild\r
+\r
+:CleanAndBuild\r
+ pushd .\r
+ cd %BASE_TOOLS_PATH%\r
+ call nmake cleanall\r
+ del /f /q %BASE_TOOLS_PATH%\Bin\Win32\*.*\r
+ popd\r
+ @REM Let CleanAndBuild fall through to IncrementalBuild\r
+\r
+\r
+:IncrementalBuild\r
+ pushd .\r
+ cd %BASE_TOOLS_PATH%\r
+ call nmake c\r
+ popd\r
+ goto end\r
+\r
+\r
+:no_source_files\r
+ echo.\r
+ echo !!! ERROR !!! Cannot build BaseTools applications - no source directory located !!!\r
+ echo.\r
+ goto end\r
+\r
+:Usage\r
+ @echo.\r
+ echo Usage: "%0 [-h | -help | --help | /h | /help | /?] [ Rebuild | ForceRebuild ] [Reconfig] [base_tools_path [edk_tools_path]]"\r
+ @echo.\r
+ @echo base_tools_path BaseTools project path, BASE_TOOLS_PATH will be set to this path.\r
+ @echo edk_tools_path EDK_TOOLS_PATH will be set to this path.\r
+ @echo Rebuild If sources are available perform an Incremental build, only\r
+ @echo build those updated tools.\r
+ @echo ForceRebuild If sources are available, rebuild all tools regardless of\r
+ @echo whether they have been updated or not.\r
+ @echo Reconfig Reinstall target.txt, tools_def.txt and build_rule.txt.\r
+ @echo.\r
\r
:end\r
-@echo on\r
+set REBUILD=\r
+set FORCE_REBUILD=\r
+set RECONFIG=\r
+popd\r
\r