-/*++\r
+/** @file\r
+ UEFI Debug Library that uses PrintLib to send messages to CONOUT.\r
\r
-Copyright (c) 2006, Intel Corporation \r
-All rights reserved. This program and the accompanying materials \r
-are licensed and made available under the terms and conditions of the BSD License \r
-which accompanies this distribution. The full text of the license may be found at \r
-http://opensource.org/licenses/bsd-license.php \r
- \r
-THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, \r
-WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. \r
+ Copyright (c) 2006, Intel Corporation<BR>\r
+ All rights reserved. This program and the accompanying materials\r
+ are licensed and made available under the terms and conditions of the BSD License\r
+ which accompanies this distribution. The full text of the license may be found at\r
+ http://opensource.org/licenses/bsd-license.php\r
\r
-Module Name:\r
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
\r
- DebugLib.c\r
+**/\r
\r
-Abstract:\r
+//\r
+// Define the maximum debug and assert message length that this library supports. \r
+//\r
+#define MAX_DEBUG_MESSAGE_LENGTH 0x100\r
\r
- UEFI Debug Library that uses PrintLib to send messages to CONOUT\r
+STATIC BOOLEAN mDebugLevelInstalled = FALSE;\r
+STATIC EFI_DEBUG_LEVEL_PROTOCOL mDebugLevel = { 0 };\r
\r
---*/\r
+/**\r
+ Installs Debug Level Protocol.\r
+ \r
+ The constructor function installs Debug Level Protocol on the ImageHandle.\r
+ It will ASSERT() if the installation fails and will always return EFI_SUCCESS. \r
\r
-static BOOLEAN mDebugLevelInstalled = FALSE;\r
-static EFI_DEBUG_LEVEL_PROTOCOL mDebugLevel = { 0 };\r
+ @param ImageHandle The firmware allocated handle for the EFI image.\r
+ @param SystemTable A pointer to the EFI System Table.\r
+ \r
+ @retval EFI_SUCCESS The constructor always returns EFI_SUCCESS.\r
\r
+**/\r
EFI_STATUS\r
+EFIAPI\r
DebugLibConstructor (\r
IN EFI_HANDLE ImageHandle,\r
IN EFI_SYSTEM_TABLE *SystemTable\r
)\r
-/*++\r
-\r
-Routine Description:\r
-\r
-Arguments:\r
-\r
-Returns:\r
-\r
---*/\r
{\r
- EFI_STATUS Status;\r
+ EFI_STATUS Status;\r
\r
//\r
- // Initialize Debug Level Protocol\r
+ // Initialize Debug Level Protocol.\r
//\r
mDebugLevel.DebugLevel = PcdGet32(PcdDebugPrintErrorLevel);\r
\r
//\r
- // Install Debug Level Protocol \r
+ // Install Debug Level Protocol. \r
//\r
Status = gBS->InstallMultipleProtocolInterfaces (\r
&ImageHandle,\r
- &gEfiDebugLevelProtocolGuid, &mDebugLevel,\r
+ &gEfiDebugLevelProtocolGuid,\r
+ &mDebugLevel,\r
NULL\r
);\r
ASSERT_EFI_ERROR (Status);\r
\r
//\r
- // Set flag to show that the Debug Level Protocol has been installed\r
+ // Set flag to show that the Debug Level Protocol has been installed.\r
//\r
mDebugLevelInstalled = TRUE;\r
\r
- return EFI_SUCCESS;\r
+ return Status;\r
}\r
\r
-VOID\r
-EFIAPI\r
-DebugPrint (\r
- IN UINTN ErrorLevel,\r
- IN CHAR8 *Format,\r
- ...\r
- )\r
-/*++\r
-\r
-Routine Description:\r
-\r
- Wrapper for DebugVPrint ()\r
- \r
-Arguments:\r
+/**\r
\r
- ErrorLevel - If error level is set do the debug print.\r
+ Prints a debug message to the debug output device if the specified error level is enabled.\r
\r
- Format - String to use for the print, followed by Print arguments.\r
+ If any bit in ErrorLevel is also set in PcdDebugPrintErrorLevel, then print \r
+ the message specified by Format and the associated variable argument list to \r
+ the debug output device.\r
\r
- ... - Print arguments.\r
+ If Format is NULL, then ASSERT().\r
\r
-Returns:\r
- \r
- None\r
+ @param ErrorLevel The error level of the debug message.\r
+ @param Format Format string for the debug message to print.\r
\r
---*/\r
+**/\r
+VOID\r
+EFIAPI\r
+DebugPrint (\r
+ IN UINTN ErrorLevel,\r
+ IN CONST CHAR8 *Format,\r
+ ...\r
+ )\r
{\r
- CHAR16 Buffer[0x100];\r
- CHAR16 UnicodeBuffer[0x100];\r
- UINT32 Index;\r
+ CHAR16 Buffer[MAX_DEBUG_MESSAGE_LENGTH];\r
VA_LIST Marker;\r
\r
//\r
- // Check to see if CONOUT is avilable\r
+ // If Format is NULL, then ASSERT().\r
//\r
- if (gST->ConOut == NULL) {\r
- return;\r
- }\r
+ ASSERT (Format != NULL);\r
\r
//\r
// Check driver Debug Level value and global debug level\r
}\r
}\r
\r
- //\r
- // BUGBUG: Need print that take CHAR8 Format and returns CHAR16 Buffer\r
- //\r
- for (Index = 0; Format[Index] != 0; Index++) {\r
- UnicodeBuffer[Index] = Format[Index];\r
- }\r
- UnicodeBuffer[Index] = Format[Index];\r
-\r
//\r
// Convert the DEBUG() message to a Unicode String\r
//\r
VA_START (Marker, Format);\r
- UnicodeVSPrint (Buffer, sizeof (Buffer), UnicodeBuffer, Marker);\r
+ UnicodeVSPrintAsciiFormat (Buffer, sizeof (Buffer), Format, Marker);\r
VA_END (Marker);\r
\r
//\r
- // Send the print string to the Standard Error device\r
+ // Send the print string to the Console Output device if CONOUT is available.\r
//\r
- gST->ConOut->OutputString (gST->ConOut, Buffer);\r
+ if (gST->ConOut != NULL) {\r
+ gST->ConOut->OutputString (gST->ConOut, Buffer);\r
+ }\r
}\r
\r
-VOID\r
-EFIAPI\r
-DebugAssert (\r
- IN CHAR8 *FileName,\r
- IN INTN LineNumber,\r
- IN CHAR8 *Description\r
- )\r
-/*++\r
\r
-Routine Description:\r
-\r
- Worker function for ASSERT(). If Error Logging hub is loaded log ASSERT\r
- information. If Error Logging hub is not loaded CpuBreakpoint ().\r
+/**\r
\r
- We use UINT64 buffers due to IPF alignment concerns.\r
+ Prints an assert message containing a filename, line number, and description. \r
+ This may be followed by a breakpoint or a dead loop.\r
\r
-Arguments:\r
+ Print a message of the form "ASSERT <FileName>(<LineNumber>): <Description>\n" \r
+ to the debug output device. If DEBUG_PROPERTY_ASSERT_BREAKPOINT_ENABLED bit of \r
+ PcdDebugProperyMask is set then CpuBreakpoint() is called. Otherwise, if \r
+ DEBUG_PROPERTY_ASSERT_DEADLOOP_ENABLED bit of PcdDebugProperyMask is set then \r
+ CpuDeadLoop() is called. If neither of these bits are set, then this function \r
+ returns immediately after the message is printed to the debug output device.\r
+ DebugAssert() must actively prevent recusrsion. If DebugAssert() is called while\r
+ processing another DebugAssert(), then DebugAssert() must return immediately.\r
\r
- FileName - File name of failing routine.\r
+ If FileName is NULL, then a <FileName> string of "(NULL) Filename" is printed.\r
\r
- LineNumber - Line number of failing ASSERT().\r
+ If Description is NULL, then a <Description> string of "(NULL) Description" is printed.\r
\r
- Description - Descritption, usally the assertion,\r
- \r
-Returns:\r
- \r
- None\r
+ @param FileName Pointer to the name of the source file that generated the assert condition.\r
+ @param LineNumber The line number in the source file that generated the assert condition\r
+ @param Description Pointer to the description of the assert condition.\r
\r
---*/\r
+**/\r
+VOID\r
+EFIAPI\r
+DebugAssert (\r
+ IN CONST CHAR8 *FileName,\r
+ IN UINTN LineNumber,\r
+ IN CONST CHAR8 *Description\r
+ )\r
{\r
- CHAR16 Buffer[0x100];\r
-\r
- //\r
- // Check to see if CONOUT is avilable\r
- //\r
- if (gST->ConOut == NULL) {\r
- return;\r
- }\r
+ CHAR16 Buffer[MAX_DEBUG_MESSAGE_LENGTH];\r
\r
//\r
// Generate the ASSERT() message in Unicode format\r
//\r
- UnicodeSPrint (Buffer, sizeof (Buffer), (CHAR16 *)L"ASSERT %s(%d): %s\n", FileName, LineNumber, Description);\r
+ UnicodeSPrintAsciiFormat (Buffer, sizeof (Buffer), "ASSERT %s(%d): %s\n", FileName, LineNumber, Description);\r
\r
//\r
- // Send the print string to the Standard Error device\r
+ // Send the print string to the Console Output device if CONOUT is available.\r
//\r
- gST->ConOut->OutputString (gST->ConOut, Buffer);\r
+ if (gST->ConOut != NULL) {\r
+ gST->ConOut->OutputString (gST->ConOut, Buffer);\r
+ }\r
\r
//\r
- // Put break point in module that contained the error.\r
+ // Generate a Breakpoint, DeadLoop, or NOP based on PCD settings\r
//\r
- CpuBreakpoint ();\r
+ if ((PcdGet8(PcdDebugPropertyMask) & DEBUG_PROPERTY_ASSERT_BREAKPOINT_ENABLED) != 0) {\r
+ CpuBreakpoint ();\r
+ } else if ((PcdGet8(PcdDebugPropertyMask) & DEBUG_PROPERTY_ASSERT_DEADLOOP_ENABLED) != 0) {\r
+ CpuDeadLoop ();\r
+ }\r
}\r
\r
+\r
/**\r
+\r
Fills a target buffer with PcdDebugClearMemoryValue, and returns the target buffer.\r
\r
This function fills Length bytes of Buffer with the value specified by \r
\r
If Buffer is NULL, then ASSERT().\r
\r
- If Length is greater than (MAX_ADDRESS \96 Buffer + 1), then ASSERT(). \r
+ If Length is greater than (MAX_ADDRESS ? Buffer + 1), then ASSERT(). \r
\r
- @param Buffer Pointer to the target buffer to fill with PcdDebugClearMemoryValue.\r
- @param Length Number of bytes in Buffer to fill with zeros PcdDebugClearMemoryValue. \r
+ @param Buffer Pointer to the target buffer to fill with PcdDebugClearMemoryValue.\r
+ @param Length Number of bytes in Buffer to fill with zeros PcdDebugClearMemoryValue. \r
\r
@return Buffer\r
\r
IN UINTN Length\r
)\r
{\r
-// SetMem (Buffer, Length, PcdGet8(PcdDebugClearMemoryValue));\r
- SetMem (Buffer, Length, 0xAF);\r
- return Buffer;\r
+ //\r
+ // If Buffer is NULL, then ASSERT().\r
+ //\r
+ ASSERT (Buffer != NULL);\r
+\r
+ //\r
+ // SetMem() checks for the the ASSERT() condition on Length and returns Buffer\r
+ //\r
+ return SetMem (Buffer, Length, PcdGet8(PcdDebugClearMemoryValue));\r
}\r
\r
+\r
+/**\r
+ \r
+ Returns TRUE if ASSERT() macros are enabled.\r
+\r
+ This function returns TRUE if the DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of \r
+ PcdDebugProperyMask is set. Otherwise FALSE is returned.\r
+\r
+ @retval TRUE The DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of PcdDebugProperyMask is set.\r
+ @retval FALSE The DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of PcdDebugProperyMask is clear.\r
+\r
+**/\r
BOOLEAN\r
EFIAPI\r
DebugAssertEnabled (\r
return ((PcdGet8(PcdDebugPropertyMask) & DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED) != 0);\r
}\r
\r
+\r
+/**\r
+ \r
+ Returns TRUE if DEBUG()macros are enabled.\r
+\r
+ This function returns TRUE if the DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of \r
+ PcdDebugProperyMask is set. Otherwise FALSE is returned.\r
+\r
+ @retval TRUE The DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of PcdDebugProperyMask is set.\r
+ @retval FALSE The DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of PcdDebugProperyMask is clear.\r
+\r
+**/\r
BOOLEAN\r
EFIAPI\r
DebugPrintEnabled (\r
return ((PcdGet8(PcdDebugPropertyMask) & DEBUG_PROPERTY_DEBUG_PRINT_ENABLED) != 0);\r
}\r
\r
+\r
+/**\r
+ \r
+ Returns TRUE if DEBUG_CODE()macros are enabled.\r
+\r
+ This function returns TRUE if the DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of \r
+ PcdDebugProperyMask is set. Otherwise FALSE is returned.\r
+\r
+ @retval TRUE The DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of PcdDebugProperyMask is set.\r
+ @retval FALSE The DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of PcdDebugProperyMask is clear.\r
+\r
+**/\r
BOOLEAN\r
EFIAPI\r
DebugCodeEnabled (\r
return ((PcdGet8(PcdDebugPropertyMask) & DEBUG_PROPERTY_DEBUG_CODE_ENABLED) != 0);\r
}\r
\r
+\r
+/**\r
+ \r
+ Returns TRUE if DEBUG_CLEAR_MEMORY()macro is enabled.\r
+\r
+ This function returns TRUE if the DEBUG_PROPERTY_DEBUG_CLEAR_MEMORY_ENABLED bit of \r
+ PcdDebugProperyMask is set. Otherwise FALSE is returned.\r
+\r
+ @retval TRUE The DEBUG_PROPERTY_DEBUG_CLEAR_MEMORY_ENABLED bit of PcdDebugProperyMask is set.\r
+ @retval FALSE The DEBUG_PROPERTY_DEBUG_CLEAR_MEMORY_ENABLED bit of PcdDebugProperyMask is clear.\r
+\r
+**/\r
BOOLEAN\r
EFIAPI\r
DebugClearMemoryEnabled (\r