+++ /dev/null
-/** @file\r
-* SMSC LAN91x series Network Controller Driver.\r
-*\r
-* Copyright (c) 2013-2017 Linaro.org\r
-*\r
-* Derived from the LAN9118 driver. Original sources\r
-* Copyright (c) 2012-2013, ARM Limited. All rights reserved.\r
-*\r
-* SPDX-License-Identifier: BSD-2-Clause-Patent\r
-*\r
-**/\r
-\r
-#include <Uefi.h>\r
-#include <Uefi/UefiSpec.h>\r
-#include <Base.h>\r
-\r
-// Protocols used by this driver\r
-#include <Protocol/SimpleNetwork.h>\r
-#include <Protocol/ComponentName2.h>\r
-#include <Protocol/PxeBaseCode.h>\r
-#include <Protocol/DevicePath.h>\r
-\r
-// Libraries used by this driver\r
-#include <Library/UefiLib.h>\r
-#include <Library/DebugLib.h>\r
-#include <Library/UefiBootServicesTableLib.h>\r
-#include <Library/MemoryAllocationLib.h>\r
-#include <Library/IoLib.h>\r
-#include <Library/PcdLib.h>\r
-#include <Library/NetLib.h>\r
-#include <Library/DevicePathLib.h>\r
-\r
-// Hardware register definitions\r
-#include "Lan91xDxeHw.h"\r
-\r
-// Debugging output options\r
-//#define LAN91X_PRINT_REGISTERS 1\r
-//#define LAN91X_PRINT_PACKET_HEADERS 1\r
-//#define LAN91X_PRINT_RECEIVE_FILTERS 1\r
-\r
-// Chip power-down option -- UNTESTED\r
-//#define LAN91X_POWER_DOWN 1\r
-\r
-/*---------------------------------------------------------------------------------------------------------------------\r
-\r
- LAN91x Information Structure\r
-\r
----------------------------------------------------------------------------------------------------------------------*/\r
-typedef struct _LAN91X_DRIVER {\r
- // Driver signature\r
- UINT32 Signature;\r
- EFI_HANDLE ControllerHandle;\r
-\r
- // EFI SNP protocol instances\r
- EFI_SIMPLE_NETWORK_PROTOCOL Snp;\r
- EFI_SIMPLE_NETWORK_MODE SnpMode;\r
-\r
- // EFI Snp statistics instance\r
- EFI_NETWORK_STATISTICS Stats;\r
-\r
- // Transmit Buffer recycle queue\r
-\r
- LIST_ENTRY TransmitQueueHead;\r
-\r
- // Register access variables\r
- UINTN IoBase; // I/O Base Address\r
- UINT8 Revision; // Chip Revision Number\r
- INT8 PhyAd; // Phy Address\r
- UINT8 BankSel; // Currently selected register bank\r
-\r
-} LAN91X_DRIVER;\r
-\r
-#define LAN91X_NO_PHY (-1) // PhyAd value if PHY not detected\r
-\r
-#define LAN91X_SIGNATURE SIGNATURE_32('S', 'M', '9', '1')\r
-#define INSTANCE_FROM_SNP_THIS(a) CR(a, LAN91X_DRIVER, Snp, LAN91X_SIGNATURE)\r
-\r
-#define LAN91X_STALL 2\r
-#define LAN91X_MEMORY_ALLOC_POLLS 100 // Max times to poll for memory allocation\r
-#define LAN91X_PKT_OVERHEAD 6 // Overhead bytes in packet buffer\r
-\r
-// Synchronization TPLs\r
-#define LAN91X_TPL TPL_CALLBACK\r
-\r
-// Most common CRC32 Polynomial for little endian machines\r
-#define CRC_POLYNOMIAL 0xEDB88320\r
-\r
-\r
-typedef struct {\r
- MAC_ADDR_DEVICE_PATH Lan91x;\r
- EFI_DEVICE_PATH_PROTOCOL End;\r
-} LAN91X_DEVICE_PATH;\r
-\r
-LAN91X_DEVICE_PATH Lan91xPathTemplate = {\r
- {\r
- {\r
- MESSAGING_DEVICE_PATH, MSG_MAC_ADDR_DP,\r
- { (UINT8) (sizeof(MAC_ADDR_DEVICE_PATH)), (UINT8) ((sizeof(MAC_ADDR_DEVICE_PATH)) >> 8) }\r
- },\r
- { { 0 } },\r
- 0\r
- },\r
- {\r
- END_DEVICE_PATH_TYPE,\r
- END_ENTIRE_DEVICE_PATH_SUBTYPE,\r
- { sizeof(EFI_DEVICE_PATH_PROTOCOL), 0 }\r
- }\r
-};\r
-\r
-// Chip ID numbers and name strings\r
-#define CHIP_9192 3\r
-#define CHIP_9194 4\r
-#define CHIP_9195 5\r
-#define CHIP_9196 6\r
-#define CHIP_91100 7\r
-#define CHIP_91100FD 8\r
-#define CHIP_91111FD 9\r
-\r
-STATIC CHAR16 CONST * CONST ChipIds[ 16 ] = {\r
- NULL, NULL, NULL,\r
- /* 3 */ L"SMC91C90/91C92",\r
- /* 4 */ L"SMC91C94",\r
- /* 5 */ L"SMC91C95",\r
- /* 6 */ L"SMC91C96",\r
- /* 7 */ L"SMC91C100",\r
- /* 8 */ L"SMC91C100FD",\r
- /* 9 */ L"SMC91C11xFD",\r
- NULL, NULL, NULL,\r
- NULL, NULL, NULL\r
-};\r
-\r
-/* ------------------ TxBuffer Queue structures ------------------- */\r
-\r
-typedef struct {\r
- VOID *Buf;\r
- UINTN Length;\r
-} MSK_SYSTEM_BUF;\r
-\r
-typedef struct {\r
- UINTN Signature;\r
- LIST_ENTRY Link;\r
- MSK_SYSTEM_BUF SystemBuf;\r
-} MSK_LINKED_SYSTEM_BUF;\r
-\r
-#define TX_MBUF_SIGNATURE SIGNATURE_32 ('t','x','m','b')\r
-\r
-/* ------------------ MAC Address Hash Calculations ------------------- */\r
-\r
-/*\r
-** Generate a hash value from a multicast address\r
-**\r
-** This uses the Ethernet standard CRC32 algorithm\r
-**\r
-** INFO USED:\r
-** 1: http://en.wikipedia.org/wiki/Cyclic_redundancy_check\r
-**\r
-** 2: http://www.erg.abdn.ac.uk/~gorry/eg3567/dl-pages/crc.html\r
-**\r
-** 3: http://en.wikipedia.org/wiki/Computation_of_CRC\r
-*/\r
-STATIC\r
-UINT32\r
-MulticastHash (\r
- IN EFI_MAC_ADDRESS *Mac,\r
- IN UINT32 AddrLen\r
- )\r
-{\r
- UINT32 Iter;\r
- UINT32 Remainder;\r
- UINT32 Crc32;\r
- UINT8 *Addr;\r
-\r
- // 0xFFFFFFFF is standard seed for Ethernet\r
- Remainder = 0xFFFFFFFF;\r
-\r
- // Generate the remainder byte-by-byte (LSB first)\r
- Addr = &Mac->Addr[0];\r
- while (AddrLen-- > 0) {\r
- Remainder ^= *Addr++;\r
- for (Iter = 0; Iter < 8; ++Iter) {\r
- // Check if exponent is set\r
- if ((Remainder & 1) != 0) {\r
- Remainder = (Remainder >> 1) ^ CRC_POLYNOMIAL;\r
- } else {\r
- Remainder = (Remainder >> 1) ^ 0;\r
- }\r
- }\r
- }\r
-\r
- // Reverse the bits of the remainder\r
- Crc32 = 0;\r
- for (Iter = 0; Iter < 32; ++Iter) {\r
- Crc32 <<= 1;\r
- Crc32 |= Remainder & 1;\r
- Remainder >>= 1;\r
- }\r
- return Crc32;\r
-}\r
-\r
-\r
-/* ---------------- Banked Register Operations ------------------ */\r
-\r
-// Select the proper I/O bank\r
-STATIC\r
-VOID\r
-SelectIoBank (\r
- LAN91X_DRIVER *LanDriver,\r
- UINTN Register\r
- )\r
-{\r
- UINT8 Bank;\r
-\r
- Bank = RegisterToBank (Register);\r
-\r
- // Select the proper I/O bank\r
- if (LanDriver->BankSel != Bank) {\r
- MmioWrite16 (LanDriver->IoBase + LAN91X_BANK_OFFSET, Bank);\r
- LanDriver->BankSel = Bank;\r
- }\r
-}\r
-\r
-// Read a 16-bit I/O-space register\r
-STATIC\r
-UINT16\r
-ReadIoReg16 (\r
- LAN91X_DRIVER *LanDriver,\r
- UINTN Register\r
- )\r
-{\r
- UINT8 Offset;\r
-\r
- // Select the proper I/O bank\r
- SelectIoBank (LanDriver, Register);\r
-\r
- // Read the requested register\r
- Offset = RegisterToOffset (Register);\r
- return MmioRead16 (LanDriver->IoBase + Offset);\r
-}\r
-\r
-// Write a 16-bit I/O-space register\r
-STATIC\r
-UINT16\r
-WriteIoReg16 (\r
- LAN91X_DRIVER *LanDriver,\r
- UINTN Register,\r
- UINT16 Value\r
- )\r
-{\r
- UINT8 Offset;\r
-\r
- // Select the proper I/O bank\r
- SelectIoBank (LanDriver, Register);\r
-\r
- // Write the requested register\r
- Offset = RegisterToOffset (Register);\r
- return MmioWrite16 (LanDriver->IoBase + Offset, Value);\r
-}\r
-\r
-// Read an 8-bit I/O-space register\r
-STATIC\r
-UINT8\r
-ReadIoReg8 (\r
- LAN91X_DRIVER *LanDriver,\r
- UINTN Register\r
- )\r
-{\r
- UINT8 Offset;\r
-\r
- // Select the proper I/O bank\r
- SelectIoBank (LanDriver, Register);\r
-\r
- // Read the requested register\r
- Offset = RegisterToOffset (Register);\r
- return MmioRead8 (LanDriver->IoBase + Offset);\r
-}\r
-\r
-// Write an 8-bit I/O-space register\r
-STATIC\r
-UINT8\r
-WriteIoReg8 (\r
- LAN91X_DRIVER *LanDriver,\r
- UINTN Register,\r
- UINT8 Value\r
- )\r
-{\r
- UINT8 Offset;\r
-\r
- // Select the proper I/O bank\r
- SelectIoBank (LanDriver, Register);\r
-\r
- // Write the requested register\r
- Offset = RegisterToOffset (Register);\r
- return MmioWrite8 (LanDriver->IoBase + Offset, Value);\r
-}\r
-\r
-\r
-/* ---------------- MII/PHY Access Operations ------------------ */\r
-\r
-#define LAN91X_MDIO_STALL 1\r
-\r
-STATIC\r
-VOID\r
-MdioOutput (\r
- LAN91X_DRIVER *LanDriver,\r
- UINTN Bits,\r
- UINT32 Value\r
- )\r
-{\r
- UINT16 MgmtReg;\r
- UINT32 Mask;\r
-\r
- MgmtReg = ReadIoReg16 (LanDriver, LAN91X_MGMT);\r
- MgmtReg &= ~MGMT_MCLK;\r
- MgmtReg |= MGMT_MDOE;\r
-\r
- for (Mask = (1 << (Bits - 1)); Mask != 0; Mask >>= 1) {\r
- if ((Value & Mask) != 0) {\r
- MgmtReg |= MGMT_MDO;\r
- } else {\r
- MgmtReg &= ~MGMT_MDO;\r
- }\r
-\r
- WriteIoReg16 (LanDriver, LAN91X_MGMT, MgmtReg);\r
- gBS->Stall (LAN91X_MDIO_STALL);\r
- WriteIoReg16 (LanDriver, LAN91X_MGMT, MgmtReg | MGMT_MCLK);\r
- gBS->Stall (LAN91X_MDIO_STALL);\r
- }\r
-}\r
-#define PHY_OUTPUT_TIME (2 * LAN91X_MDIO_STALL)\r
-\r
-STATIC\r
-UINT32\r
-MdioInput (\r
- LAN91X_DRIVER *LanDriver,\r
- UINTN Bits\r
- )\r
-{\r
- UINT16 MgmtReg;\r
- UINT32 Mask;\r
- UINT32 Value;\r
-\r
- MgmtReg = ReadIoReg16 (LanDriver, LAN91X_MGMT);\r
- MgmtReg &= ~(MGMT_MDOE | MGMT_MCLK | MGMT_MDO);\r
- WriteIoReg16 (LanDriver, LAN91X_MGMT, MgmtReg);\r
-\r
- Value = 0;\r
- for (Mask = (1 << (Bits - 1)); Mask != 0; Mask >>= 1) {\r
- if ((ReadIoReg16 (LanDriver, LAN91X_MGMT) & MGMT_MDI) != 0) {\r
- Value |= Mask;\r
- }\r
-\r
- WriteIoReg16 (LanDriver, LAN91X_MGMT, MgmtReg);\r
- gBS->Stall (LAN91X_MDIO_STALL);\r
- WriteIoReg16 (LanDriver, LAN91X_MGMT, MgmtReg | MGMT_MCLK);\r
- gBS->Stall (LAN91X_MDIO_STALL);\r
- }\r
-\r
- return Value;\r
-}\r
-#define PHY_INPUT_TIME (2 * LAN91X_MDIO_STALL)\r
-\r
-STATIC\r
-VOID\r
-MdioIdle (\r
- LAN91X_DRIVER *LanDriver\r
- )\r
-{\r
- UINT16 MgmtReg;\r
-\r
- MgmtReg = ReadIoReg16 (LanDriver, LAN91X_MGMT);\r
- MgmtReg &= ~(MGMT_MDOE | MGMT_MCLK | MGMT_MDO);\r
- WriteIoReg16 (LanDriver, LAN91X_MGMT, MgmtReg);\r
-}\r
-\r
-// Write to a PHY register\r
-STATIC\r
-VOID\r
-WritePhyReg16 (\r
- LAN91X_DRIVER *LanDriver,\r
- UINTN RegAd,\r
- UINT16 Value\r
- )\r
-{\r
- // Bit-bang the MII Serial Frame write operation\r
- MdioOutput (LanDriver, 32, 0xffffffff); // Send 32 Ones as a preamble\r
- MdioOutput (LanDriver, 2, 0x01); // Send Start (01)\r
- MdioOutput (LanDriver, 2, 0x01); // Send Write (01)\r
- MdioOutput (LanDriver, 5, LanDriver->PhyAd); // Send PHYAD[4:0]\r
- MdioOutput (LanDriver, 5, RegAd); // Send REGAD[4:0]\r
- MdioOutput (LanDriver, 2, 0x02); // Send TurnAround (10)\r
- MdioOutput (LanDriver, 16, Value); // Write 16 data bits\r
-\r
- // Idle the MDIO bus\r
- MdioIdle (LanDriver);\r
-}\r
-// Calculate approximate time to write a PHY register in microseconds\r
-#define PHY_WRITE_TIME ((32 + 2 + 2 + 5 + 5 + 2 + 16) * PHY_OUTPUT_TIME)\r
-\r
-// Read from a PHY register\r
-STATIC\r
-UINT16\r
-ReadPhyReg16 (\r
- LAN91X_DRIVER *LanDriver,\r
- UINTN RegAd\r
- )\r
-{\r
- UINT32 Value;\r
-\r
- // Bit-bang the MII Serial Frame read operation\r
- MdioOutput (LanDriver, 32, 0xffffffff); // Send 32 Ones as a preamble\r
- MdioOutput (LanDriver, 2, 0x01); // Send Start (01)\r
- MdioOutput (LanDriver, 2, 0x02); // Send Read (10)\r
- MdioOutput (LanDriver, 5, LanDriver->PhyAd); // Send PHYAD[4:0]\r
- MdioOutput (LanDriver, 5, RegAd); // Send REGAD[4:0]\r
-\r
- (VOID) MdioInput (LanDriver, 2); // Discard TurnAround bits\r
- Value = MdioInput (LanDriver, 16); // Read 16 data bits\r
-\r
- // Idle the MDIO bus\r
- MdioIdle (LanDriver);\r
-\r
- return (Value & 0xffff);\r
-}\r
-// Calculate approximate time to read a PHY register in microseconds\r
-#define PHY_READ_TIME (((32 + 2 + 2 + 5 + 5) * PHY_OUTPUT_TIME) + \\r
- ((2 + 16) * PHY_INPUT_TIME))\r
-\r
-\r
-/* ---------------- Debug Functions ------------------ */\r
-\r
-#ifdef LAN91X_PRINT_REGISTERS\r
-STATIC\r
-VOID\r
-PrintIoRegisters (\r
- IN LAN91X_DRIVER *LanDriver\r
- )\r
-{\r
- UINTN Bank;\r
- UINTN Offset;\r
- UINT16 Value;\r
-\r
- DEBUG ((DEBUG_ERROR, "\nLAN91x I/O Register Dump:\n"));\r
-\r
- // Print current bank select register\r
- Value = MmioRead16 (LanDriver->IoBase + LAN91X_BANK_OFFSET);\r
- DEBUG ((DEBUG_ERROR, " BankSel: %d Bank Register %04x (%d)\n",\r
- LanDriver->BankSel, Value, Value & 0x0007));\r
-\r
- // Print all I/O registers\r
- for (Offset = 0; Offset < 0x0e; Offset += 2) {\r
- DEBUG ((DEBUG_ERROR, " %02x:", Offset));\r
- for (Bank = 0; Bank <= 3; ++Bank) {\r
- DEBUG ((DEBUG_ERROR, " %04x", ReadIoReg16 (LanDriver, MakeRegister (Bank, Offset))));\r
- }\r
- DEBUG ((DEBUG_ERROR, "\n"));\r
- }\r
-}\r
-\r
-STATIC\r
-VOID\r
-PrintPhyRegisters (\r
- IN LAN91X_DRIVER *LanDriver\r
- )\r
-{\r
- UINTN RegNum;\r
-\r
- DEBUG ((DEBUG_ERROR, "\nLAN91x Phy %d Register Dump:\n", LanDriver->PhyAd));\r
-\r
- // Print all Phy registers\r
- for (RegNum = 0; RegNum <= 5; ++RegNum) {\r
- DEBUG ((DEBUG_ERROR, " %2d: %04x\n",\r
- RegNum,\r
- ReadPhyReg16 (LanDriver, RegNum)\r
- ));\r
- }\r
- for (RegNum = 16; RegNum <= 20; ++RegNum) {\r
- DEBUG ((DEBUG_ERROR, " %2d: %04x\n",\r
- RegNum,\r
- ReadPhyReg16 (LanDriver, RegNum)\r
- ));\r
- }\r
-}\r
-#endif\r
-\r
-#if LAN91X_PRINT_PACKET_HEADERS\r
-STATIC\r
-VOID\r
-PrintIpDgram (\r
- IN CONST VOID *DstMac,\r
- IN CONST VOID *SrcMac,\r
- IN CONST VOID *Proto,\r
- IN CONST VOID *IpDgram\r
- )\r
-{\r
- CONST UINT8 *Ptr;\r
- UINT16 SrcPort;\r
- UINT16 DstPort;\r
-\r
- Ptr = DstMac;\r
- DEBUG ((DEBUG_ERROR, " Dst: %02x-%02x-%02x",\r
- Ptr[0], Ptr[1], Ptr[2]));\r
- DEBUG ((DEBUG_ERROR, "-%02x-%02x-%02x",\r
- Ptr[3], Ptr[4], Ptr[5]));\r
-\r
- Ptr = SrcMac;\r
- DEBUG ((DEBUG_ERROR, " Src: %02x-%02x-%02x",\r
- Ptr[0], Ptr[1], Ptr[2]));\r
- DEBUG ((DEBUG_ERROR, "-%02x-%02x-%02x",\r
- Ptr[3], Ptr[4], Ptr[5]));\r
-\r
- Ptr = Proto;\r
- DEBUG ((DEBUG_ERROR, " Proto: %02x%02x\n",\r
- Ptr[0], Ptr[1]));\r
-\r
- Ptr = IpDgram;\r
- switch (Ptr[9]) {\r
- case EFI_IP_PROTO_ICMP:\r
- DEBUG ((DEBUG_ERROR, " ICMP"));\r
- break;\r
- case EFI_IP_PROTO_TCP:\r
- DEBUG ((DEBUG_ERROR, " TCP"));\r
- break;\r
- case EFI_IP_PROTO_UDP:\r
- DEBUG ((DEBUG_ERROR, " UDP"));\r
- break;\r
- default:\r
- DEBUG ((DEBUG_ERROR, " IpProto %d\n", Ptr[9]));\r
- return;\r
- }\r
-\r
- DEBUG ((DEBUG_ERROR, " SrcIp: %d.%d.%d.%d",\r
- Ptr[12], Ptr[13], Ptr[14], Ptr[15]));\r
- DEBUG ((DEBUG_ERROR, " DstIp: %d.%d.%d.%d",\r
- Ptr[16], Ptr[17], Ptr[18], Ptr[19]));\r
-\r
- SrcPort = (Ptr[20] << 8) | Ptr[21];\r
- DstPort = (Ptr[22] << 8) | Ptr[23];\r
- DEBUG ((DEBUG_ERROR, " SrcPort: %d DstPort: %d\n", SrcPort, DstPort));\r
-}\r
-#endif\r
-\r
-\r
-/* ---------------- PHY Management Operations ----------------- */\r
-\r
-STATIC\r
-EFI_STATUS\r
-PhyDetect (\r
- IN LAN91X_DRIVER *LanDriver\r
- )\r
-{\r
- UINT16 PhyId1;\r
- UINT16 PhyId2;\r
-\r
- for (LanDriver->PhyAd = 0x1f; LanDriver->PhyAd >= 0 ; --LanDriver->PhyAd) {\r
- PhyId1 = ReadPhyReg16 (LanDriver, PHY_INDEX_ID1);\r
- PhyId2 = ReadPhyReg16 (LanDriver, PHY_INDEX_ID2);\r
-\r
- if ((PhyId1 != 0x0000) && (PhyId1 != 0xffff) &&\r
- (PhyId2 != 0x0000) && (PhyId2 != 0xffff)) {\r
- if ((PhyId1 == 0x0016) && ((PhyId2 & 0xfff0) == 0xf840)) {\r
- DEBUG ((DEBUG_ERROR, "LAN91x: PHY type LAN83C183 (LAN91C111 Internal)\n"));\r
- } else if ((PhyId1 == 0x0282) && ((PhyId2 & 0xfff0) == 0x1c50)) {\r
- DEBUG ((DEBUG_ERROR, "LAN91x: PHY type LAN83C180\n"));\r
- } else {\r
- DEBUG ((DEBUG_ERROR, "LAN91x: PHY id %04x:%04x\n", PhyId1, PhyId2));\r
- }\r
- return EFI_SUCCESS;\r
- }\r
- }\r
-\r
- DEBUG ((DEBUG_ERROR, "LAN91x: PHY detection failed\n"));\r
- return EFI_NO_MEDIA;\r
-}\r
-\r
-\r
-// Check the Link Status and take appropriate action\r
-STATIC\r
-BOOLEAN\r
-CheckLinkStatus (\r
- IN LAN91X_DRIVER *LanDriver\r
- )\r
-{\r
- UINT16 PhyStatus;\r
-\r
- // Get the PHY Status\r
- PhyStatus = ReadPhyReg16 (LanDriver, PHY_INDEX_BASIC_STATUS);\r
-\r
- return (PhyStatus & PHYSTS_LINK_STS) != 0;\r
-}\r
-\r
-\r
-// Do auto-negotiation\r
-STATIC\r
-EFI_STATUS\r
-PhyAutoNegotiate (\r
- IN LAN91X_DRIVER *LanDriver\r
- )\r
-{\r
- UINTN Retries;\r
- UINT16 PhyControl;\r
- UINT16 PhyStatus;\r
- UINT16 PhyAdvert;\r
-\r
- // If there isn't a PHY, don't try to reset it\r
- if (LanDriver->PhyAd == LAN91X_NO_PHY) {\r
- return EFI_SUCCESS;\r
- }\r
-\r
- // Next check that auto-negotiation is supported\r
- PhyStatus = ReadPhyReg16 (LanDriver, PHY_INDEX_BASIC_STATUS);\r
- if ((PhyStatus & PHYSTS_AUTO_CAP) == 0) {\r
- return EFI_SUCCESS;\r
- }\r
-\r
- // Translate capabilities to advertise\r
- PhyAdvert = PHYANA_CSMA;\r
-\r
- if ((PhyStatus & PHYSTS_10BASET_HDPLX) != 0) {\r
- PhyAdvert |= PHYANA_10BASET;\r
- }\r
- if ((PhyStatus & PHYSTS_10BASET_FDPLX) != 0) {\r
- PhyAdvert |= PHYANA_10BASETFD;\r
- }\r
- if ((PhyStatus & PHYSTS_100BASETX_HDPLX) != 0) {\r
- PhyAdvert |= PHYANA_100BASETX;\r
- }\r
- if ((PhyStatus & PHYSTS_100BASETX_FDPLX) != 0) {\r
- PhyAdvert |= PHYANA_100BASETXFD;\r
- }\r
- if ((PhyStatus & PHYSTS_100BASE_T4) != 0) {\r
- PhyAdvert |= PHYANA_100BASET4;\r
- }\r
-\r
- // Set the capabilities to advertise\r
- WritePhyReg16 (LanDriver, PHY_INDEX_AUTO_NEG_ADVERT, PhyAdvert);\r
- (VOID) ReadPhyReg16 (LanDriver, PHY_INDEX_AUTO_NEG_ADVERT);\r
-\r
- // Restart Auto-Negotiation\r
- PhyControl = ReadPhyReg16 (LanDriver, PHY_INDEX_BASIC_CTRL);\r
- PhyControl &= ~(PHYCR_SPEED_SEL | PHYCR_DUPLEX_MODE);\r
- PhyControl |= PHYCR_AUTO_EN | PHYCR_RST_AUTO;\r
- WritePhyReg16 (LanDriver, PHY_INDEX_BASIC_CTRL, PhyControl);\r
-\r
- // Wait up to 2 seconds for the process to complete\r
- Retries = 2000000 / (PHY_READ_TIME + 100);\r
- while ((ReadPhyReg16 (LanDriver, PHY_INDEX_BASIC_STATUS) & PHYSTS_AUTO_COMP) == 0) {\r
- if (--Retries == 0) {\r
- DEBUG ((DEBUG_ERROR, "LAN91x: PHY auto-negotiation timed-out\n"));\r
- return EFI_TIMEOUT;\r
- }\r
- gBS->Stall (100);\r
- }\r
-\r
- return EFI_SUCCESS;\r
-}\r
-\r
-\r
-// Perform PHY software reset\r
-STATIC\r
-EFI_STATUS\r
-PhySoftReset (\r
- IN LAN91X_DRIVER *LanDriver\r
- )\r
-{\r
- UINTN Retries;\r
-\r
- // If there isn't a PHY, don't try to reset it\r
- if (LanDriver->PhyAd == LAN91X_NO_PHY) {\r
- return EFI_SUCCESS;\r
- }\r
-\r
- // Request a PHY reset\r
- WritePhyReg16 (LanDriver, PHY_INDEX_BASIC_CTRL, PHYCR_RESET);\r
-\r
- // The internal PHY will reset within 50ms. Allow 100ms.\r
- Retries = 100000 / (PHY_READ_TIME + 100);\r
- while (ReadPhyReg16 (LanDriver, PHY_INDEX_BASIC_CTRL) & PHYCR_RESET) {\r
- if (--Retries == 0) {\r
- DEBUG ((DEBUG_ERROR, "LAN91x: PHY reset timed-out\n"));\r
- return EFI_TIMEOUT;\r
- }\r
- gBS->Stall (100);\r
- }\r
-\r
- return EFI_SUCCESS;\r
-}\r
-\r
-\r
-/* ---------------- General Operations ----------------- */\r
-\r
-STATIC\r
-EFI_MAC_ADDRESS\r
-GetCurrentMacAddress (\r
- IN LAN91X_DRIVER *LanDriver\r
- )\r
-{\r
- UINTN RegNum;\r
- UINT8 *Addr;\r
- EFI_MAC_ADDRESS MacAddress;\r
-\r
- SetMem (&MacAddress, sizeof(MacAddress), 0);\r
-\r
- Addr = &MacAddress.Addr[0];\r
- for (RegNum = LAN91X_IAR0; RegNum <= LAN91X_IAR5; ++RegNum) {\r
- *Addr = ReadIoReg8 (LanDriver, RegNum);\r
- ++Addr;\r
- }\r
-\r
- return MacAddress;\r
-}\r
-\r
-STATIC\r
-EFI_STATUS\r
-SetCurrentMacAddress (\r
- IN LAN91X_DRIVER *LanDriver,\r
- IN EFI_MAC_ADDRESS *MacAddress\r
- )\r
-{\r
- UINTN RegNum;\r
- UINT8 *Addr;\r
-\r
- Addr = &MacAddress->Addr[0];\r
- for (RegNum = LAN91X_IAR0; RegNum <= LAN91X_IAR5; ++RegNum) {\r
- WriteIoReg8 (LanDriver, RegNum, *Addr);\r
- ++Addr;\r
- }\r
-\r
- return EFI_SUCCESS;\r
-}\r
-\r
-STATIC\r
-EFI_STATUS\r
-MmuOperation (\r
- IN LAN91X_DRIVER *LanDriver,\r
- IN UINTN MmuOp\r
- )\r
-{\r
- UINTN Polls;\r
-\r
- WriteIoReg16 (LanDriver, LAN91X_MMUCR, MmuOp);\r
- Polls = 100;\r
- while ((ReadIoReg16 (LanDriver, LAN91X_MMUCR) & MMUCR_BUSY) != 0) {\r
- if (--Polls == 0) {\r
- DEBUG ((DEBUG_ERROR, "LAN91x: MMU operation %04x timed-out\n", MmuOp));\r
- return EFI_TIMEOUT;\r
- }\r
- gBS->Stall (LAN91X_STALL);\r
- }\r
-\r
- return EFI_SUCCESS;\r
-}\r
-\r
-// Read bytes from the DATA register\r
-STATIC\r
-EFI_STATUS\r
-ReadIoData (\r
- IN LAN91X_DRIVER *LanDriver,\r
- IN VOID *Buffer,\r
- IN UINTN BufLen\r
- )\r
-{\r
- UINT8 *Ptr;\r
-\r
- Ptr = Buffer;\r
- for (; BufLen > 0; --BufLen) {\r
- *Ptr = ReadIoReg8 (LanDriver, LAN91X_DATA0);\r
- ++Ptr;\r
- }\r
-\r
- return EFI_SUCCESS;\r
-}\r
-\r
-// Write bytes to the DATA register\r
-STATIC\r
-EFI_STATUS\r
-WriteIoData (\r
- IN LAN91X_DRIVER *LanDriver,\r
- IN VOID *Buffer,\r
- IN UINTN BufLen\r
- )\r
-{\r
- UINT8 *Ptr;\r
-\r
- Ptr = Buffer;\r
- for (; BufLen > 0; --BufLen) {\r
- WriteIoReg8 (LanDriver, LAN91X_DATA0, *Ptr);\r
- ++Ptr;\r
- }\r
-\r
- return EFI_SUCCESS;\r
-}\r
-\r
-// Disable the interface\r
-STATIC\r
-EFI_STATUS\r
-ChipDisable (\r
- IN LAN91X_DRIVER *LanDriver\r
- )\r
-{\r
-#ifdef LAN91X_POWER_DOWN\r
- UINT16 Val16;\r
-#endif\r
-\r
- // Stop Rx and Tx operations\r
- WriteIoReg16 (LanDriver, LAN91X_RCR, RCR_CLEAR);\r
- WriteIoReg16 (LanDriver, LAN91X_TCR, TCR_CLEAR);\r
-\r
-#ifdef LAN91X_POWER_DOWN\r
- // Power-down the chip\r
- Val16 = ReadIoReg16 (LanDriver, LAN91X_CR);\r
- Val16 &= ~CR_EPH_POWER_EN;\r
- WriteIoReg16 (LanDriver, LAN91X_CR, Val16);\r
-#endif\r
-\r
- return EFI_SUCCESS;\r
-}\r
-\r
-// Enable the interface\r
-STATIC\r
-EFI_STATUS\r
-ChipEnable (\r
- IN LAN91X_DRIVER *LanDriver\r
- )\r
-{\r
-#ifdef LAN91X_POWER_DOWN\r
- UINT16 Val16;\r
-\r
- // Power-up the chip\r
- Val16 = ReadIoReg16 (LanDriver, LAN91X_CR);\r
- Val16 |= CR_EPH_POWER_EN;\r
- WriteIoReg16 (LanDriver, LAN91X_CR, Val16);\r
- gBS->Stall (LAN91X_STALL);\r
-#endif\r
-\r
- // Start Rx and Tx operations\r
- WriteIoReg16 (LanDriver, LAN91X_TCR, TCR_DEFAULT);\r
- WriteIoReg16 (LanDriver, LAN91X_RCR, RCR_DEFAULT);\r
-\r
- return EFI_SUCCESS;\r
-}\r
-\r
-\r
-// Perform software reset on the LAN91x\r
-STATIC\r
-EFI_STATUS\r
-SoftReset (\r
- IN LAN91X_DRIVER *LanDriver\r
- )\r
-{\r
- UINT16 Val16;\r
-\r
- // Issue the reset\r
- WriteIoReg16 (LanDriver, LAN91X_RCR, RCR_SOFT_RST);\r
- gBS->Stall (LAN91X_STALL);\r
- WriteIoReg16 (LanDriver, LAN91X_RCR, RCR_CLEAR);\r
-\r
- // Set the configuration register\r
- WriteIoReg16 (LanDriver, LAN91X_CR, CR_DEFAULT);\r
- gBS->Stall (LAN91X_STALL);\r
-\r
- // Stop Rx and Tx\r
- WriteIoReg16 (LanDriver, LAN91X_RCR, RCR_CLEAR);\r
- WriteIoReg16 (LanDriver, LAN91X_TCR, TCR_CLEAR);\r
-\r
- // Initialize the Control Register\r
- Val16 = ReadIoReg16 (LanDriver, LAN91X_CTR);\r
- Val16 |= CTR_AUTO_REL;\r
- WriteIoReg16 (LanDriver, LAN91X_CTR, Val16);\r
-\r
- // Reset the MMU\r
- MmuOperation (LanDriver, MMUCR_OP_RESET_MMU);\r
-\r
- return EFI_SUCCESS;\r
-}\r
-\r
-/*\r
-** Probe()\r
-**\r
-** Validate that there is a LAN91x device.\r
-**\r
-*/\r
-STATIC\r
-EFI_STATUS\r
-Probe (\r
- IN LAN91X_DRIVER *LanDriver\r
- )\r
-{\r
- UINT16 Bank;\r
- UINT16 Val16;\r
- CHAR16 CONST *ChipId;\r
- UINTN ResetTime;\r
-\r
- // First check that the Bank Select register is valid\r
- Bank = MmioRead16 (LanDriver->IoBase + LAN91X_BANK_OFFSET);\r
- if ((Bank & 0xff00) != 0x3300) {\r
- DEBUG ((DEBUG_ERROR, "LAN91x: signature error: expecting 33xx, read %04x\n", Bank));\r
- return EFI_DEVICE_ERROR;\r
- }\r
-\r
- // Try reading the revision register next\r
- LanDriver->BankSel = 0xff;\r
- Val16 = ReadIoReg16 (LanDriver, LAN91X_REV);\r
-\r
- Bank = MmioRead16 (LanDriver->IoBase + LAN91X_BANK_OFFSET);\r
- if ((Bank & 0xff03) != 0x3303) {\r
- DEBUG ((DEBUG_ERROR, "LAN91x: signature error: expecting 33x3, read %04x\n", Bank));\r
- return EFI_DEVICE_ERROR;\r
- }\r
-\r
- // Validate the revision register\r
- if ((Val16 & 0xff00) != 0x3300) {\r
- DEBUG ((DEBUG_ERROR, "LAN91x: revision error: expecting 33xx, read %04x\n", Val16));\r
- return EFI_DEVICE_ERROR;\r
- }\r
-\r
- ChipId = ChipIds[(Val16 >> 4) & 0x0f];\r
- if (ChipId == NULL) {\r
- DEBUG ((DEBUG_ERROR, "LAN91x: unrecognized revision: %04x\n", Val16));\r
- return EFI_DEVICE_ERROR;\r
- }\r
- DEBUG ((DEBUG_ERROR, "LAN91x: detected chip %s rev %d\n", ChipId, Val16 & 0xf));\r
- LanDriver->Revision = Val16 & 0xff;\r
-\r
- // Reload from EEPROM to get the hardware MAC address\r
- WriteIoReg16 (LanDriver, LAN91X_CTR, CTR_RESERVED | CTR_RELOAD);\r
- ResetTime = 1000;\r
- while ((ReadIoReg16 (LanDriver, LAN91X_CTR) & CTR_RELOAD) != 0) {\r
- if (--ResetTime == 0) {\r
- DEBUG ((DEBUG_ERROR, "LAN91x: reload from EEPROM timed-out\n"));\r
- WriteIoReg16 (LanDriver, LAN91X_CTR, CTR_RESERVED);\r
- return EFI_DEVICE_ERROR;\r
- }\r
- gBS->Stall (LAN91X_STALL);\r
- }\r
-\r
- // Read and save the Permanent MAC Address\r
- LanDriver->SnpMode.PermanentAddress = GetCurrentMacAddress (LanDriver);\r
- LanDriver->SnpMode.CurrentAddress = LanDriver->SnpMode.PermanentAddress;\r
- DEBUG ((DEBUG_ERROR, //DEBUG_NET | DEBUG_INFO,\r
- "LAN91x: HW MAC Address: %02x-%02x-%02x-%02x-%02x-%02x\n",\r
- LanDriver->SnpMode.PermanentAddress.Addr[0],\r
- LanDriver->SnpMode.PermanentAddress.Addr[1],\r
- LanDriver->SnpMode.PermanentAddress.Addr[2],\r
- LanDriver->SnpMode.PermanentAddress.Addr[3],\r
- LanDriver->SnpMode.PermanentAddress.Addr[4],\r
- LanDriver->SnpMode.PermanentAddress.Addr[5]\r
- ));\r
-\r
- // Reset the device\r
- SoftReset (LanDriver);\r
-\r
- // Try to detect a PHY\r
- if (LanDriver->Revision > (CHIP_91100 << 4)) {\r
- PhyDetect (LanDriver);\r
- } else {\r
- LanDriver->PhyAd = LAN91X_NO_PHY;\r
- }\r
-\r
- return EFI_SUCCESS;\r
-}\r
-\r
-\r
-\r
-\r
-/*------------------ Simple Network Driver entry point functions ------------------*/\r
-\r
-// Refer to the Simple Network Protocol section (21.1)\r
-// in the UEFI 2.3.1 Specification for documentation.\r
-\r
-#define ReturnUnlock(s) do { Status = (s); goto exit_unlock; } while(0)\r
-\r
-\r
-/*\r
-** UEFI Start() function\r
-**\r
-*/\r
-EFI_STATUS\r
-EFIAPI\r
-SnpStart (\r
- IN EFI_SIMPLE_NETWORK_PROTOCOL* Snp\r
- )\r
-{\r
- EFI_SIMPLE_NETWORK_MODE *Mode;\r
- EFI_TPL SavedTpl;\r
- EFI_STATUS Status;\r
-\r
- // Check Snp instance\r
- if (Snp == NULL) {\r
- return EFI_INVALID_PARAMETER;\r
- }\r
-\r
- // Serialize access to data and registers\r
- SavedTpl = gBS->RaiseTPL (LAN91X_TPL);\r
- Mode = Snp->Mode;\r
-\r
- // Check state of the driver\r
- switch (Mode->State) {\r
- case EfiSimpleNetworkStopped:\r
- break;\r
- case EfiSimpleNetworkStarted:\r
- case EfiSimpleNetworkInitialized:\r
- DEBUG ((DEBUG_WARN, "LAN91x: Driver already started\n"));\r
- ReturnUnlock (EFI_ALREADY_STARTED);\r
- default:\r
- DEBUG ((DEBUG_ERROR, "LAN91x: Driver in an invalid state: %u\n",\r
- (UINTN)Snp->Mode->State));\r
- ReturnUnlock (EFI_DEVICE_ERROR);\r
- }\r
-\r
-\r
- // Change state\r
- Mode->State = EfiSimpleNetworkStarted;\r
- Status = EFI_SUCCESS;\r
-\r
- // Restore TPL and return\r
-exit_unlock:\r
- gBS->RestoreTPL (SavedTpl);\r
- return Status;\r
-}\r
-\r
-/*\r
-** UEFI Stop() function\r
-**\r
-*/\r
-EFI_STATUS\r
-EFIAPI\r
-SnpStop (\r
- IN EFI_SIMPLE_NETWORK_PROTOCOL* Snp\r
- )\r
-{\r
- LAN91X_DRIVER *LanDriver;\r
- EFI_TPL SavedTpl;\r
- EFI_STATUS Status;\r
-\r
- // Check Snp Instance\r
- if (Snp == NULL) {\r
- return EFI_INVALID_PARAMETER;\r
- }\r
-\r
- // Serialize access to data and registers\r
- SavedTpl = gBS->RaiseTPL (LAN91X_TPL);\r
-\r
- // Check state of the driver\r
- switch (Snp->Mode->State) {\r
- case EfiSimpleNetworkStarted:\r
- case EfiSimpleNetworkInitialized:\r
- break;\r
- case EfiSimpleNetworkStopped:\r
- DEBUG ((DEBUG_WARN, "LAN91x: Driver not started\n"));\r
- ReturnUnlock (EFI_NOT_STARTED);\r
- default:\r
- DEBUG ((DEBUG_ERROR, "LAN91x: Driver in an invalid state: %u\n",\r
- (UINTN)Snp->Mode->State));\r
- ReturnUnlock (EFI_DEVICE_ERROR);\r
- }\r
-\r
- // Find the LanDriver structure\r
- LanDriver = INSTANCE_FROM_SNP_THIS(Snp);\r
-\r
- // Stop the Tx and Rx\r
- ChipDisable (LanDriver);\r
-\r
- // Change the state\r
- Snp->Mode->State = EfiSimpleNetworkStopped;\r
- Status = EFI_SUCCESS;\r
-\r
- // Restore TPL and return\r
-exit_unlock:\r
- gBS->RestoreTPL (SavedTpl);\r
- return Status;\r
-}\r
-\r
-/*\r
-** UEFI Initialize() function\r
-**\r
-*/\r
-EFI_STATUS\r
-EFIAPI\r
-SnpInitialize (\r
- IN EFI_SIMPLE_NETWORK_PROTOCOL* Snp,\r
- IN UINTN RxBufferSize OPTIONAL,\r
- IN UINTN TxBufferSize OPTIONAL\r
- )\r
-{\r
- LAN91X_DRIVER *LanDriver;\r
- EFI_TPL SavedTpl;\r
- EFI_STATUS Status;\r
-\r
- // Check Snp Instance\r
- if (Snp == NULL) {\r
- return EFI_INVALID_PARAMETER;\r
- }\r
-\r
- // Serialize access to data and registers\r
- SavedTpl = gBS->RaiseTPL (LAN91X_TPL);\r
-\r
- // Check that driver was started but not initialised\r
- switch (Snp->Mode->State) {\r
- case EfiSimpleNetworkStarted:\r
- break;\r
- case EfiSimpleNetworkInitialized:\r
- DEBUG ((DEBUG_WARN, "LAN91x: Driver already initialized\n"));\r
- ReturnUnlock (EFI_SUCCESS);\r
- case EfiSimpleNetworkStopped:\r
- DEBUG ((DEBUG_WARN, "LAN91x: Driver not started\n"));\r
- ReturnUnlock (EFI_NOT_STARTED);\r
- default:\r
- DEBUG ((DEBUG_ERROR, "LAN91x: Driver in an invalid state: %u\n",\r
- (UINTN)Snp->Mode->State));\r
- ReturnUnlock (EFI_DEVICE_ERROR);\r
- }\r
-\r
- // Find the LanDriver structure\r
- LanDriver = INSTANCE_FROM_SNP_THIS(Snp);\r
-\r
- // Initiate a software reset\r
- Status = SoftReset (LanDriver);\r
- if (EFI_ERROR(Status)) {\r
- DEBUG ((DEBUG_WARN, "LAN91x: Soft reset failed\n"));\r
- ReturnUnlock (EFI_DEVICE_ERROR);\r
- }\r
-\r
- // Initiate a PHY reset\r
- if (PhySoftReset (LanDriver) < 0) {\r
- Snp->Mode->State = EfiSimpleNetworkStopped;\r
- DEBUG ((DEBUG_WARN, "LAN91x: PHY soft reset timeout\n"));\r
- ReturnUnlock (EFI_NOT_STARTED);\r
- }\r
-\r
- // Do auto-negotiation\r
- Status = PhyAutoNegotiate (LanDriver);\r
- if (EFI_ERROR(Status)) {\r
- DEBUG ((DEBUG_WARN, "LAN91x: PHY auto-negotiation failed\n"));\r
- }\r
-\r
- // Enable the receiver and transmitter\r
- ChipEnable (LanDriver);\r
-\r
- // Now acknowledge all interrupts\r
- WriteIoReg8 (LanDriver, LAN91X_IST, 0xFF);\r
-\r
- // Declare the driver as initialized\r
- Snp->Mode->State = EfiSimpleNetworkInitialized;\r
- Status = EFI_SUCCESS;\r
-\r
- // Restore TPL and return\r
-exit_unlock:\r
- gBS->RestoreTPL (SavedTpl);\r
- return Status;\r
-}\r
-\r
-/*\r
-** UEFI Reset () function\r
-**\r
-*/\r
-EFI_STATUS\r
-EFIAPI\r
-SnpReset (\r
- IN EFI_SIMPLE_NETWORK_PROTOCOL* Snp,\r
- IN BOOLEAN Verification\r
- )\r
-{\r
- LAN91X_DRIVER *LanDriver;\r
- EFI_TPL SavedTpl;\r
- EFI_STATUS Status;\r
-\r
- // Check Snp Instance\r
- if (Snp == NULL) {\r
- return EFI_INVALID_PARAMETER;\r
- }\r
-\r
- // Serialize access to data and registers\r
- SavedTpl = gBS->RaiseTPL (LAN91X_TPL);\r
-\r
- // Check that driver was started and initialised\r
- switch (Snp->Mode->State) {\r
- case EfiSimpleNetworkInitialized:\r
- break;\r
- case EfiSimpleNetworkStarted:\r
- DEBUG ((DEBUG_WARN, "LAN91x: Driver not yet initialized\n"));\r
- ReturnUnlock (EFI_DEVICE_ERROR);\r
- case EfiSimpleNetworkStopped:\r
- DEBUG ((DEBUG_WARN, "LAN91x: Driver not started\n"));\r
- ReturnUnlock (EFI_NOT_STARTED);\r
- default:\r
- DEBUG ((DEBUG_ERROR, "LAN91x: Driver in an invalid state: %u\n",\r
- (UINTN)Snp->Mode->State));\r
- ReturnUnlock (EFI_DEVICE_ERROR);\r
- }\r
-\r
- // Find the LanDriver structure\r
- LanDriver = INSTANCE_FROM_SNP_THIS(Snp);\r
-\r
- // Initiate a software reset\r
- if (EFI_ERROR (SoftReset (LanDriver))) {\r
- DEBUG ((DEBUG_WARN, "LAN91x: Soft reset failed\n"));\r
- ReturnUnlock (EFI_DEVICE_ERROR);\r
- }\r
-\r
- // Initiate a PHY reset\r
- if (EFI_ERROR (PhySoftReset (LanDriver))) {\r
- DEBUG ((DEBUG_WARN, "LAN91x: PHY soft reset failed\n"));\r
- ReturnUnlock (EFI_DEVICE_ERROR);\r
- }\r
-\r
- // Enable the receiver and transmitter\r
- Status = ChipEnable (LanDriver);\r
-\r
- // Restore TPL and return\r
-exit_unlock:\r
- gBS->RestoreTPL (SavedTpl);\r
- return Status;\r
-}\r
-\r
-/*\r
-** UEFI Shutdown () function\r
-**\r
-*/\r
-EFI_STATUS\r
-EFIAPI\r
-SnpShutdown (\r
- IN EFI_SIMPLE_NETWORK_PROTOCOL* Snp\r
- )\r
-{\r
- LAN91X_DRIVER *LanDriver;\r
- EFI_TPL SavedTpl;\r
- EFI_STATUS Status;\r
-\r
- // Check Snp Instance\r
- if (Snp == NULL) {\r
- return EFI_INVALID_PARAMETER;\r
- }\r
-\r
- // Serialize access to data and registers\r
- SavedTpl = gBS->RaiseTPL (LAN91X_TPL);\r
-\r
- // First check that driver has already been initialized\r
- switch (Snp->Mode->State) {\r
- case EfiSimpleNetworkInitialized:\r
- break;\r
- case EfiSimpleNetworkStarted:\r
- DEBUG ((DEBUG_WARN, "LAN91x: Driver not yet initialized\n"));\r
- ReturnUnlock (EFI_DEVICE_ERROR);\r
- case EfiSimpleNetworkStopped:\r
- DEBUG ((DEBUG_WARN, "LAN91x: Driver in stopped state\n"));\r
- ReturnUnlock (EFI_NOT_STARTED);\r
- default:\r
- DEBUG ((DEBUG_ERROR, "LAN91x: Driver in an invalid state: %u\n",\r
- (UINTN)Snp->Mode->State));\r
- ReturnUnlock (EFI_DEVICE_ERROR);\r
- }\r
-\r
- // Find the LanDriver structure\r
- LanDriver = INSTANCE_FROM_SNP_THIS(Snp);\r
-\r
- // Disable the interface\r
- Status = ChipDisable (LanDriver);\r
-\r
- // Restore TPL and return\r
-exit_unlock:\r
- gBS->RestoreTPL (SavedTpl);\r
- return Status;\r
-}\r
-\r
-\r
-/*\r
-** UEFI ReceiveFilters() function\r
-**\r
-*/\r
-EFI_STATUS\r
-EFIAPI\r
-SnpReceiveFilters (\r
- IN EFI_SIMPLE_NETWORK_PROTOCOL* Snp,\r
- IN UINT32 Enable,\r
- IN UINT32 Disable,\r
- IN BOOLEAN Reset,\r
- IN UINTN NumMfilter OPTIONAL,\r
- IN EFI_MAC_ADDRESS *Mfilter OPTIONAL\r
- )\r
-{\r
-#define MCAST_HASH_BYTES 8\r
-\r
- LAN91X_DRIVER *LanDriver;\r
- EFI_SIMPLE_NETWORK_MODE *SnpMode;\r
- EFI_TPL SavedTpl;\r
- EFI_STATUS Status;\r
- UINTN i;\r
- UINT32 Crc;\r
- UINT16 RcvCtrl;\r
- UINT8 McastHash[MCAST_HASH_BYTES];\r
-\r
- // Check Snp Instance\r
- if (Snp == NULL) {\r
- return EFI_INVALID_PARAMETER;\r
- }\r
-\r
- // Serialize access to data and registers\r
- SavedTpl = gBS->RaiseTPL (LAN91X_TPL);\r
-\r
- // First check that driver has already been initialized\r
- switch (Snp->Mode->State) {\r
- case EfiSimpleNetworkInitialized:\r
- break;\r
- case EfiSimpleNetworkStarted:\r
- DEBUG ((DEBUG_WARN, "LAN91x: Driver not yet initialized\n"));\r
- ReturnUnlock (EFI_DEVICE_ERROR);\r
- case EfiSimpleNetworkStopped:\r
- DEBUG ((DEBUG_WARN, "LAN91x: Driver not started\n"));\r
- ReturnUnlock (EFI_NOT_STARTED);\r
- default:\r
- DEBUG ((DEBUG_ERROR, "LAN91x: Driver in an invalid state: %u\n",\r
- (UINTN)Snp->Mode->State));\r
- ReturnUnlock (EFI_DEVICE_ERROR);\r
- }\r
-\r
- // Find the LanDriver structure\r
- LanDriver = INSTANCE_FROM_SNP_THIS(Snp);\r
- SnpMode = Snp->Mode;\r
-\r
-#ifdef LAN91X_PRINT_RECEIVE_FILTERS\r
- DEBUG ((DEBUG_ERROR, "LAN91x:SnpReceiveFilters()\n"));\r
- DEBUG ((DEBUG_ERROR, " Enable = %08x\n", Enable));\r
- DEBUG ((DEBUG_ERROR, " Disable = %08x\n", Disable));\r
- DEBUG ((DEBUG_ERROR, " Reset = %d\n", Reset));\r
- DEBUG ((DEBUG_ERROR, " NumMfilter = %d\n", NumMfilter));\r
- for (i = 0; i < NumMfilter; ++i) {\r
- DEBUG ((DEBUG_ERROR,\r
- " [%2d] = %02x-%02x-%02x-%02x-%02x-%02x\n",\r
- i,\r
- Mfilter[i].Addr[0],\r
- Mfilter[i].Addr[1],\r
- Mfilter[i].Addr[2],\r
- Mfilter[i].Addr[3],\r
- Mfilter[i].Addr[4],\r
- Mfilter[i].Addr[5]));\r
- }\r
-#endif\r
-\r
- // Update the Multicast Hash registers\r
- if (Reset) {\r
- // Clear the hash table\r
- SetMem (McastHash, MCAST_HASH_BYTES, 0);\r
- SnpMode->MCastFilterCount = 0;\r
- } else {\r
- // Read the current hash table\r
- for (i = 0; i < MCAST_HASH_BYTES; ++i) {\r
- McastHash[i] = ReadIoReg8 (LanDriver, LAN91X_MT0 + i);\r
- }\r
- // Set the new additions\r
- for (i = 0; i < NumMfilter; ++i) {\r
- Crc = MulticastHash (&Mfilter[i], NET_ETHER_ADDR_LEN);\r
- McastHash[(Crc >> 29) & 0x3] |= 1 << ((Crc >> 26) & 0x3);\r
- }\r
- SnpMode->MCastFilterCount = NumMfilter;\r
- }\r
- // If the hash registers need updating, write them\r
- if (Reset || NumMfilter > 0) {\r
- for (i = 0; i < MCAST_HASH_BYTES; ++i) {\r
- WriteIoReg8 (LanDriver, LAN91X_MT0 + i, McastHash[i]);\r
- }\r
- }\r
-\r
- RcvCtrl = ReadIoReg16 (LanDriver, LAN91X_RCR);\r
- if ((Enable & EFI_SIMPLE_NETWORK_RECEIVE_PROMISCUOUS) != 0) {\r
- RcvCtrl |= RCR_PRMS;\r
- SnpMode->ReceiveFilterSetting |= EFI_SIMPLE_NETWORK_RECEIVE_PROMISCUOUS;\r
- }\r
- if ((Disable & EFI_SIMPLE_NETWORK_RECEIVE_PROMISCUOUS) != 0) {\r
- RcvCtrl &= ~RCR_PRMS;\r
- SnpMode->ReceiveFilterSetting &= ~EFI_SIMPLE_NETWORK_RECEIVE_PROMISCUOUS;\r
- }\r
-\r
- if ((Enable & EFI_SIMPLE_NETWORK_RECEIVE_PROMISCUOUS_MULTICAST) != 0) {\r
- RcvCtrl |= RCR_ALMUL;\r
- SnpMode->ReceiveFilterSetting |= EFI_SIMPLE_NETWORK_RECEIVE_PROMISCUOUS_MULTICAST;\r
- }\r
- if ((Disable & EFI_SIMPLE_NETWORK_RECEIVE_PROMISCUOUS_MULTICAST) != 0) {\r
- RcvCtrl &= ~RCR_ALMUL;\r
- SnpMode->ReceiveFilterSetting &= ~EFI_SIMPLE_NETWORK_RECEIVE_PROMISCUOUS_MULTICAST;\r
- }\r
- WriteIoReg16 (LanDriver, LAN91X_RCR, RcvCtrl);\r
-\r
- Status = SetCurrentMacAddress (LanDriver, &SnpMode->CurrentAddress);\r
-\r
- // Restore TPL and return\r
-exit_unlock:\r
- gBS->RestoreTPL (SavedTpl);\r
- return Status;\r
-}\r
-\r
-/*\r
-** UEFI StationAddress() function\r
-**\r
-*/\r
-EFI_STATUS\r
-EFIAPI\r
-SnpStationAddress (\r
- IN EFI_SIMPLE_NETWORK_PROTOCOL *Snp,\r
- IN BOOLEAN Reset,\r
- IN EFI_MAC_ADDRESS *NewMac\r
-)\r
-{\r
- LAN91X_DRIVER *LanDriver;\r
- EFI_TPL SavedTpl;\r
- EFI_STATUS Status;\r
-\r
- // Check Snp instance\r
- if (Snp == NULL) {\r
- return EFI_INVALID_PARAMETER;\r
- }\r
-\r
- // Serialize access to data and registers\r
- SavedTpl = gBS->RaiseTPL (LAN91X_TPL);\r
-\r
- // Check that driver was started and initialised\r
- switch (Snp->Mode->State) {\r
- case EfiSimpleNetworkInitialized:\r
- break;\r
- case EfiSimpleNetworkStarted:\r
- DEBUG ((DEBUG_WARN, "LAN91x: Driver not yet initialized\n"));\r
- ReturnUnlock (EFI_DEVICE_ERROR);\r
- case EfiSimpleNetworkStopped:\r
- DEBUG ((DEBUG_WARN, "LAN91x: Driver not started\n"));\r
- ReturnUnlock (EFI_NOT_STARTED);\r
- default:\r
- DEBUG ((DEBUG_ERROR, "LAN91x: Driver in an invalid state: %u\n",\r
- (UINTN)Snp->Mode->State));\r
- ReturnUnlock (EFI_DEVICE_ERROR);\r
- }\r
-\r
- // Find the LanDriver structure\r
- LanDriver = INSTANCE_FROM_SNP_THIS(Snp);\r
-\r
- if (Reset) {\r
- Snp->Mode->CurrentAddress = Snp->Mode->PermanentAddress;\r
- } else {\r
- if (NewMac == NULL) {\r
- ReturnUnlock (EFI_INVALID_PARAMETER);\r
- }\r
- Snp->Mode->CurrentAddress = *NewMac;\r
- }\r
-\r
- Status = SetCurrentMacAddress (LanDriver, &Snp->Mode->CurrentAddress);\r
-\r
- // Restore TPL and return\r
-exit_unlock:\r
- gBS->RestoreTPL (SavedTpl);\r
- return Status;\r
-}\r
-\r
-/*\r
-** UEFI Statistics() function\r
-**\r
-*/\r
-EFI_STATUS\r
-EFIAPI\r
-SnpStatistics (\r
- IN EFI_SIMPLE_NETWORK_PROTOCOL* Snp,\r
- IN BOOLEAN Reset,\r
- IN OUT UINTN *StatSize,\r
- OUT EFI_NETWORK_STATISTICS *Statistics\r
- )\r
-{\r
- LAN91X_DRIVER *LanDriver;\r
- EFI_TPL SavedTpl;\r
- EFI_STATUS Status;\r
-\r
- // Check Snp instance\r
- if (Snp == NULL) {\r
- return EFI_INVALID_PARAMETER;\r
- }\r
-\r
- // Check pointless condition\r
- if ((!Reset) && (StatSize == NULL) && (Statistics == NULL)) {\r
- return EFI_SUCCESS;\r
- }\r
-\r
- // Check the parameters\r
- if ((StatSize == NULL) && (Statistics != NULL)) {\r
- return EFI_INVALID_PARAMETER;\r
- }\r
-\r
- // Serialize access to data and registers\r
- SavedTpl = gBS->RaiseTPL (LAN91X_TPL);\r
-\r
- // Check that driver was started and initialised\r
- switch (Snp->Mode->State) {\r
- case EfiSimpleNetworkInitialized:\r
- break;\r
- case EfiSimpleNetworkStarted:\r
- DEBUG ((DEBUG_WARN, "LAN91x: Driver not yet initialized\n"));\r
- ReturnUnlock (EFI_DEVICE_ERROR);\r
- case EfiSimpleNetworkStopped:\r
- DEBUG ((DEBUG_WARN, "LAN91x: Driver not started\n"));\r
- ReturnUnlock (EFI_NOT_STARTED);\r
- default:\r
- DEBUG ((DEBUG_ERROR, "LAN91x: Driver in an invalid state: %u\n",\r
- (UINTN)Snp->Mode->State));\r
- ReturnUnlock (EFI_DEVICE_ERROR);\r
- }\r
-\r
- // Find the LanDriver structure\r
- LanDriver = INSTANCE_FROM_SNP_THIS(Snp);\r
-\r
- // Do a reset if required\r
- if (Reset) {\r
- ZeroMem (&LanDriver->Stats, sizeof(EFI_NETWORK_STATISTICS));\r
- }\r
-\r
- // Check buffer size\r
- if (*StatSize < sizeof(EFI_NETWORK_STATISTICS)) {\r
- *StatSize = sizeof(EFI_NETWORK_STATISTICS);\r
- ReturnUnlock (EFI_BUFFER_TOO_SMALL);\r
- goto exit_unlock;\r
- }\r
-\r
- // Fill in the statistics\r
- CopyMem(&Statistics, &LanDriver->Stats, sizeof(EFI_NETWORK_STATISTICS));\r
- Status = EFI_SUCCESS;\r
-\r
- // Restore TPL and return\r
-exit_unlock:\r
- gBS->RestoreTPL (SavedTpl);\r
- return Status;\r
-}\r
-\r
-/*\r
-** UEFI MCastIPtoMAC() function\r
-**\r
-*/\r
-EFI_STATUS\r
-EFIAPI\r
-SnpMcastIptoMac (\r
- IN EFI_SIMPLE_NETWORK_PROTOCOL* Snp,\r
- IN BOOLEAN IsIpv6,\r
- IN EFI_IP_ADDRESS *Ip,\r
- OUT EFI_MAC_ADDRESS *McastMac\r
- )\r
-{\r
- // Check Snp instance\r
- if (Snp == NULL) {\r
- return EFI_INVALID_PARAMETER;\r
- }\r
-\r
- // Check parameters\r
- if ((McastMac == NULL) || (Ip == NULL)) {\r
- return EFI_INVALID_PARAMETER;\r
- }\r
-\r
- // Make sure MAC address is empty\r
- ZeroMem (McastMac, sizeof(EFI_MAC_ADDRESS));\r
-\r
- // If we need ipv4 address\r
- if (!IsIpv6) {\r
- // Most significant 25 bits of a multicast HW address are set\r
- McastMac->Addr[0] = 0x01;\r
- McastMac->Addr[1] = 0x00;\r
- McastMac->Addr[2] = 0x5E;\r
-\r
- // Lower 23 bits from ipv4 address\r
- McastMac->Addr[3] = (Ip->v4.Addr[1] & 0x7F); // Clear the ms bit (25th bit of MAC must be 0)\r
- McastMac->Addr[4] = Ip->v4.Addr[2];\r
- McastMac->Addr[5] = Ip->v4.Addr[3];\r
- } else {\r
- // Most significant 16 bits of multicast v6 HW address are set\r
- McastMac->Addr[0] = 0x33;\r
- McastMac->Addr[1] = 0x33;\r
-\r
- // lower four octets are taken from ipv6 address\r
- McastMac->Addr[2] = Ip->v6.Addr[8];\r
- McastMac->Addr[3] = Ip->v6.Addr[9];\r
- McastMac->Addr[4] = Ip->v6.Addr[10];\r
- McastMac->Addr[5] = Ip->v6.Addr[11];\r
- }\r
-\r
- return EFI_SUCCESS;\r
-}\r
-\r
-/*\r
-** UEFI NvData() function\r
-**\r
-*/\r
-EFI_STATUS\r
-EFIAPI\r
-SnpNvData (\r
- IN EFI_SIMPLE_NETWORK_PROTOCOL* pobj,\r
- IN BOOLEAN read_write,\r
- IN UINTN offset,\r
- IN UINTN buff_size,\r
- IN OUT VOID *data\r
- )\r
-{\r
- DEBUG ((DEBUG_ERROR, "LAN91x: Non-volatile storage not supported\n"));\r
-\r
- return EFI_UNSUPPORTED;\r
-}\r
-\r
-\r
-/*\r
-** UEFI GetStatus () function\r
-**\r
-*/\r
-EFI_STATUS\r
-EFIAPI\r
-SnpGetStatus (\r
- IN EFI_SIMPLE_NETWORK_PROTOCOL *Snp,\r
- OUT UINT32 *IrqStat OPTIONAL,\r
- OUT VOID **TxBuff OPTIONAL\r
- )\r
-{\r
- LAN91X_DRIVER *LanDriver;\r
- EFI_TPL SavedTpl;\r
- EFI_STATUS Status;\r
- BOOLEAN MediaPresent;\r
- UINT8 IstReg;\r
- MSK_LINKED_SYSTEM_BUF *LinkedTXRecycleBuff;\r
-\r
- // Check preliminaries\r
- if (Snp == NULL) {\r
- return EFI_INVALID_PARAMETER;\r
- }\r
-\r
- // Serialize access to data and registers\r
- SavedTpl = gBS->RaiseTPL (LAN91X_TPL);\r
-\r
- // Check that driver was started and initialised\r
- switch (Snp->Mode->State) {\r
- case EfiSimpleNetworkInitialized:\r
- break;\r
- case EfiSimpleNetworkStarted:\r
- DEBUG ((DEBUG_WARN, "LAN91x: Driver not yet initialized\n"));\r
- ReturnUnlock (EFI_DEVICE_ERROR);\r
- case EfiSimpleNetworkStopped:\r
- DEBUG ((DEBUG_WARN, "LAN91x: Driver not started\n"));\r
- ReturnUnlock (EFI_NOT_STARTED);\r
- default:\r
- DEBUG ((DEBUG_ERROR, "LAN91x: Driver in an invalid state: %u\n",\r
- (UINTN)Snp->Mode->State));\r
- ReturnUnlock (EFI_DEVICE_ERROR);\r
- }\r
-\r
- // Find the LanDriver structure\r
- LanDriver = INSTANCE_FROM_SNP_THIS(Snp);\r
-\r
- // Arbitrarily set the interrupt status to 0\r
- if (IrqStat != NULL) {\r
- *IrqStat = 0;\r
- IstReg = ReadIoReg8 (LanDriver, LAN91X_IST);\r
- if ((IstReg & IST_RCV) != 0) {\r
- *IrqStat |= EFI_SIMPLE_NETWORK_RECEIVE_INTERRUPT;\r
- }\r
- if ((IstReg & IST_TX) != 0) {\r
- *IrqStat |= EFI_SIMPLE_NETWORK_TRANSMIT_INTERRUPT;\r
- }\r
- }\r
-\r
- // Pass back the completed buffer address\r
- // The transmit buffer status is not read when TxBuf is NULL\r
- if (TxBuff != NULL) {\r
- *((UINT8 **) TxBuff) = (UINT8 *) 0;\r
- if( !IsListEmpty (&LanDriver->TransmitQueueHead))\r
- {\r
- LinkedTXRecycleBuff = CR (GetFirstNode (&LanDriver->TransmitQueueHead), MSK_LINKED_SYSTEM_BUF, Link, TX_MBUF_SIGNATURE);\r
- if(LinkedTXRecycleBuff != NULL) {\r
- *TxBuff = LinkedTXRecycleBuff->SystemBuf.Buf;\r
- RemoveEntryList (&LinkedTXRecycleBuff->Link);\r
- FreePool (LinkedTXRecycleBuff);\r
- }\r
- }\r
- }\r
-\r
- // Update the media status\r
- MediaPresent = CheckLinkStatus (LanDriver);\r
- if (MediaPresent != Snp->Mode->MediaPresent) {\r
- DEBUG ((DEBUG_WARN, "LAN91x: Link %s\n", MediaPresent ? L"up" : L"down"));\r
- }\r
- Snp->Mode->MediaPresent = MediaPresent;\r
- Status = EFI_SUCCESS;\r
-\r
- // Restore TPL and return\r
-exit_unlock:\r
- gBS->RestoreTPL (SavedTpl);\r
- return Status;\r
-}\r
-\r
-\r
-/*\r
-** UEFI Transmit() function\r
-**\r
-*/\r
-EFI_STATUS\r
-EFIAPI\r
-SnpTransmit (\r
- IN EFI_SIMPLE_NETWORK_PROTOCOL *Snp,\r
- IN UINTN HdrSize,\r
- IN UINTN BufSize,\r
- IN VOID *BufAddr,\r
- IN EFI_MAC_ADDRESS *SrcAddr OPTIONAL,\r
- IN EFI_MAC_ADDRESS *DstAddr OPTIONAL,\r
- IN UINT16 *Protocol OPTIONAL\r
- )\r
-{\r
- LAN91X_DRIVER *LanDriver;\r
- EFI_TPL SavedTpl;\r
- EFI_STATUS Status;\r
- UINT8 *Ptr;\r
- UINTN Len;\r
- UINTN MmuPages;\r
- UINTN Retries;\r
- UINT16 Proto;\r
- UINT8 PktNum;\r
- MSK_LINKED_SYSTEM_BUF *LinkedTXRecycleBuff;\r
-\r
-\r
- // Check preliminaries\r
- if ((Snp == NULL) || (BufAddr == NULL)) {\r
- DEBUG ((DEBUG_ERROR, "LAN91x: SnpTransmit(): NULL Snp (%p) or BufAddr (%p)\n",\r
- Snp, BufAddr));\r
- return EFI_INVALID_PARAMETER;\r
- }\r
-\r
- // Serialize access to data and registers\r
- SavedTpl = gBS->RaiseTPL (LAN91X_TPL);\r
-\r
- // Check that driver was started and initialised\r
- switch (Snp->Mode->State) {\r
- case EfiSimpleNetworkInitialized:\r
- break;\r
- case EfiSimpleNetworkStarted:\r
- DEBUG ((DEBUG_WARN, "LAN91x: Driver not yet initialized\n"));\r
- ReturnUnlock (EFI_DEVICE_ERROR);\r
- case EfiSimpleNetworkStopped:\r
- DEBUG ((DEBUG_WARN, "LAN91x: Driver not started\n"));\r
- ReturnUnlock (EFI_NOT_STARTED);\r
- default:\r
- DEBUG ((DEBUG_ERROR, "LAN91x: Driver in an invalid state: %u\n",\r
- (UINTN)Snp->Mode->State));\r
- ReturnUnlock (EFI_DEVICE_ERROR);\r
- }\r
-\r
- // Find the LanDriver structure\r
- LanDriver = INSTANCE_FROM_SNP_THIS(Snp);\r
-\r
- // Ensure header is correct size if non-zero\r
- if (HdrSize != 0) {\r
- if (HdrSize != Snp->Mode->MediaHeaderSize) {\r
- DEBUG ((DEBUG_ERROR, "LAN91x: SnpTransmit(): Invalid HdrSize %d\n", HdrSize));\r
- ReturnUnlock (EFI_INVALID_PARAMETER);\r
- }\r
-\r
- if ((DstAddr == NULL) || (Protocol == NULL)) {\r
- DEBUG ((DEBUG_ERROR, "LAN91x: SnpTransmit(): NULL DstAddr %p or Protocol %p\n",\r
- DstAddr, Protocol));\r
- ReturnUnlock (EFI_INVALID_PARAMETER);\r
- }\r
- }\r
-\r
- // Before transmitting check the link status\r
- if (!Snp->Mode->MediaPresent) {\r
- DEBUG ((DEBUG_WARN, "LAN91x: SnpTransmit(): Link not ready\n"));\r
- ReturnUnlock (EFI_NOT_READY);\r
- }\r
-\r
- // Calculate the request size in 256-byte "pages" minus 1\r
- // The 91C111 ignores this, but some older devices need it.\r
- MmuPages = ((BufSize & ~1) + LAN91X_PKT_OVERHEAD - 1) >> 8;\r
- if (MmuPages > 7) {\r
- DEBUG ((DEBUG_WARN, "LAN91x: Tx buffer too large (%d bytes)\n", BufSize));\r
- LanDriver->Stats.TxOversizeFrames += 1;\r
- LanDriver->Stats.TxDroppedFrames += 1;\r
- ReturnUnlock (EFI_BAD_BUFFER_SIZE);\r
- }\r
-\r
- // Request allocation of a transmit buffer\r
- Status = MmuOperation (LanDriver, MMUCR_OP_TX_ALLOC | MmuPages);\r
- if (EFI_ERROR (Status)) {\r
- DEBUG ((DEBUG_ERROR, "LAN91x: Tx buffer request failure: %d\n", Status));\r
- ReturnUnlock (EFI_DEVICE_ERROR);\r
- }\r
-\r
- // Wait for allocation request completion\r
- Retries = LAN91X_MEMORY_ALLOC_POLLS;\r
- while ((ReadIoReg8 (LanDriver, LAN91X_IST) & IST_ALLOC) == 0) {\r
- if (--Retries == 0) {\r
- DEBUG ((DEBUG_ERROR, "LAN91x: Tx buffer allocation timeout\n"));\r
- ReturnUnlock (EFI_TIMEOUT);\r
- }\r
- }\r
-\r
- // Check for successful allocation\r
- PktNum = ReadIoReg8 (LanDriver, LAN91X_ARR);\r
- if ((PktNum & ARR_FAILED) != 0) {\r
- DEBUG ((DEBUG_ERROR, "LAN91x: Tx buffer allocation failure: %02x\n", PktNum));\r
- ReturnUnlock (EFI_NOT_READY);\r
- }\r
- PktNum &= ARR_PACKET;\r
-\r
- // Check for the nature of the frame\r
- // If no destination address, it's ARP broadcast\r
- if(DstAddr != NULL)\r
- {\r
- if (DstAddr->Addr[0] == 0xFF) {\r
- LanDriver->Stats.TxBroadcastFrames += 1;\r
- } else if ((DstAddr->Addr[0] & 0x1) == 1) {\r
- LanDriver->Stats.TxMulticastFrames += 1;\r
- } else {\r
- LanDriver->Stats.TxUnicastFrames += 1;\r
- }\r
- } else {\r
- LanDriver->Stats.TxBroadcastFrames += 1;\r
- }\r
-\r
- // Set the Packet Number and Pointer registers\r
- WriteIoReg8 (LanDriver, LAN91X_PNR, PktNum);\r
- WriteIoReg16 (LanDriver, LAN91X_PTR, PTR_AUTO_INCR);\r
-\r
- // Set up mutable buffer information variables\r
- Ptr = BufAddr;\r
- Len = BufSize;\r
-\r
- // Write Status and Byte Count first\r
- WriteIoReg16 (LanDriver, LAN91X_DATA0, 0);\r
- WriteIoReg16 (LanDriver, LAN91X_DATA0, (Len + LAN91X_PKT_OVERHEAD) & BCW_COUNT);\r
-\r
- // This packet may come with a preconfigured Ethernet header.\r
- // If not, we need to construct one from optional parameters.\r
- if (HdrSize) {\r
-\r
- // Write the destination address\r
- WriteIoData (LanDriver, DstAddr, NET_ETHER_ADDR_LEN);\r
-\r
- // Write the Source Address\r
- if (SrcAddr != NULL) {\r
- WriteIoData (LanDriver, SrcAddr, NET_ETHER_ADDR_LEN);\r
- } else {\r
- WriteIoData (LanDriver, &LanDriver->SnpMode.CurrentAddress, NET_ETHER_ADDR_LEN);\r
- }\r
-\r
- // Write the Protocol word\r
- Proto = HTONS (*Protocol);\r
- WriteIoReg16 (LanDriver, LAN91X_DATA0, Proto);\r
-\r
- // Adjust the data start and length\r
- Ptr += sizeof(ETHER_HEAD);\r
- Len -= sizeof(ETHER_HEAD);\r
- }\r
-\r
- // Copy the remainder data buffer, except the odd byte\r
- WriteIoData (LanDriver, Ptr, Len & ~1);\r
- Ptr += Len & ~1;\r
- Len &= 1;\r
-\r
- // Write the Packet Control Word and odd byte\r
- WriteIoReg16 (LanDriver, LAN91X_DATA0,\r
- (Len != 0) ? (PCW_ODD | PCW_CRC | *Ptr) : PCW_CRC);\r
-\r
- // Release the packet for transmission\r
- Status = MmuOperation (LanDriver, MMUCR_OP_TX_PUSH);\r
- if (EFI_ERROR (Status)) {\r
- DEBUG ((DEBUG_ERROR, "LAN91x: Tx buffer release failure: %d\n", Status));\r
- ReturnUnlock (EFI_DEVICE_ERROR);\r
- }\r
-\r
- // Update the Tx statistics\r
- LanDriver->Stats.TxTotalBytes += BufSize;\r
- LanDriver->Stats.TxGoodFrames += 1;\r
-\r
- // Update the Tx Buffer cache\r
- LinkedTXRecycleBuff = AllocateZeroPool (sizeof (MSK_LINKED_SYSTEM_BUF));\r
- if (LinkedTXRecycleBuff == NULL) {\r
- return EFI_OUT_OF_RESOURCES;\r
- }\r
- LinkedTXRecycleBuff->Signature = TX_MBUF_SIGNATURE;\r
- //\r
- // Add the passed Buffer to the transmit queue. Don't copy.\r
- //\r
- LinkedTXRecycleBuff->SystemBuf.Buf = BufAddr;\r
- LinkedTXRecycleBuff->SystemBuf.Length = BufSize;\r
- InsertTailList (&LanDriver->TransmitQueueHead, &LinkedTXRecycleBuff->Link);\r
-\r
- Status = EFI_SUCCESS;\r
-\r
- // Dump the packet header\r
-#if LAN91X_PRINT_PACKET_HEADERS\r
- Ptr = BufAddr;\r
- DEBUG ((DEBUG_ERROR, "LAN91X:SnpTransmit()\n"));\r
- DEBUG ((DEBUG_ERROR, " HdrSize: %d, SrcAddr: %p, Length: %d, Last byte: %02x\n",\r
- HdrSize, SrcAddr, BufSize, Ptr[BufSize - 1]));\r
- PrintIpDgram (\r
- (HdrSize == 0) ? (EFI_MAC_ADDRESS *)&Ptr[0] : DstAddr,\r
- (HdrSize == 0) ? (EFI_MAC_ADDRESS *)&Ptr[6] : (SrcAddr != NULL) ? SrcAddr : &LanDriver->SnpMode.CurrentAddress,\r
- (HdrSize == 0) ? (UINT16 *)&Ptr[12] : &Proto,\r
- &Ptr[14]\r
- );\r
-#endif\r
-\r
- // Restore TPL and return\r
-exit_unlock:\r
- gBS->RestoreTPL (SavedTpl);\r
- return Status;\r
-}\r
-\r
-\r
-/*\r
-** UEFI Receive() function\r
-**\r
-*/\r
-EFI_STATUS\r
-EFIAPI\r
-SnpReceive (\r
- IN EFI_SIMPLE_NETWORK_PROTOCOL *Snp,\r
- OUT UINTN *HdrSize OPTIONAL,\r
- IN OUT UINTN *BuffSize,\r
- OUT VOID *Data,\r
- OUT EFI_MAC_ADDRESS *SrcAddr OPTIONAL,\r
- OUT EFI_MAC_ADDRESS *DstAddr OPTIONAL,\r
- OUT UINT16 *Protocol OPTIONAL\r
- )\r
-{\r
- EFI_TPL SavedTpl;\r
- EFI_STATUS Status;\r
- LAN91X_DRIVER *LanDriver;\r
- UINT8 *DataPtr;\r
- UINT16 PktStatus;\r
- UINT16 PktLength;\r
- UINT16 PktControl;\r
- UINT8 IstReg;\r
-\r
- // Check preliminaries\r
- if ((Snp == NULL) || (Data == NULL)) {\r
- return EFI_INVALID_PARAMETER;\r
- }\r
-\r
- // Serialize access to data and registers\r
- SavedTpl = gBS->RaiseTPL (LAN91X_TPL);\r
-\r
- // Check that driver was started and initialised\r
- switch (Snp->Mode->State) {\r
- case EfiSimpleNetworkInitialized:\r
- break;\r
- case EfiSimpleNetworkStarted:\r
- DEBUG ((DEBUG_WARN, "LAN91x: Driver not yet initialized\n"));\r
- ReturnUnlock (EFI_DEVICE_ERROR);\r
- case EfiSimpleNetworkStopped:\r
- DEBUG ((DEBUG_WARN, "LAN91x: Driver not started\n"));\r
- ReturnUnlock (EFI_NOT_STARTED);\r
- default:\r
- DEBUG ((DEBUG_ERROR, "LAN91x: Driver in an invalid state: %u\n",\r
- (UINTN)Snp->Mode->State));\r
- ReturnUnlock (EFI_DEVICE_ERROR);\r
- }\r
-\r
- // Find the LanDriver structure\r
- LanDriver = INSTANCE_FROM_SNP_THIS(Snp);\r
-\r
- // Check for Rx Overrun\r
- IstReg = ReadIoReg8 (LanDriver, LAN91X_IST);\r
- if ((IstReg & IST_RX_OVRN) != 0) {\r
- LanDriver->Stats.RxTotalFrames += 1;\r
- LanDriver->Stats.RxDroppedFrames += 1;\r
- WriteIoReg8 (LanDriver, LAN91X_IST, IST_RX_OVRN);\r
- DEBUG ((DEBUG_WARN, "LAN91x: Receiver overrun\n"));\r
- }\r
-\r
- // Check for Rx data available\r
- if ((IstReg & IST_RCV) == 0) {\r
- ReturnUnlock (EFI_NOT_READY);\r
- }\r
-\r
- // Configure the PTR register for reading\r
- WriteIoReg16 (LanDriver, LAN91X_PTR, PTR_RCV | PTR_AUTO_INCR | PTR_READ);\r
-\r
- // Read the Packet Status and Packet Length words\r
- PktStatus = ReadIoReg16 (LanDriver, LAN91X_DATA0);\r
- PktLength = ReadIoReg16 (LanDriver, LAN91X_DATA0) & BCW_COUNT;\r
-\r
- // Check for valid received packet\r
- if ((PktStatus == 0) && (PktLength == 0)) {\r
- DEBUG ((DEBUG_WARN, "LAN91x: Received zero-length packet. IST=%04x\n", IstReg));\r
- ReturnUnlock (EFI_NOT_READY);\r
- }\r
- LanDriver->Stats.RxTotalFrames += 1;\r
-\r
- // Check if we got a CRC error\r
- if ((PktStatus & RX_BAD_CRC) != 0) {\r
- DEBUG ((DEBUG_WARN, "LAN91x: Received frame CRC error\n"));\r
- LanDriver->Stats.RxCrcErrorFrames += 1;\r
- LanDriver->Stats.RxDroppedFrames += 1;\r
- Status = EFI_DEVICE_ERROR;\r
- goto exit_release;\r
- }\r
-\r
- // Check if we got a too-short frame\r
- if ((PktStatus & RX_TOO_SHORT) != 0) {\r
- DEBUG ((DEBUG_WARN, "LAN91x: Received frame too short (%d bytes)\n", PktLength));\r
- LanDriver->Stats.RxUndersizeFrames += 1;\r
- LanDriver->Stats.RxDroppedFrames += 1;\r
- Status = EFI_DEVICE_ERROR;\r
- goto exit_release;\r
- }\r
-\r
- // Check if we got a too-long frame\r
- if ((PktStatus & RX_TOO_LONG) != 0) {\r
- DEBUG ((DEBUG_WARN, "LAN91x: Received frame too long (%d bytes)\n", PktLength));\r
- LanDriver->Stats.RxOversizeFrames += 1;\r
- LanDriver->Stats.RxDroppedFrames += 1;\r
- Status = EFI_DEVICE_ERROR;\r
- goto exit_release;\r
- }\r
-\r
- // Check if we got an alignment error\r
- if ((PktStatus & RX_ALGN_ERR) != 0) {\r
- DEBUG ((DEBUG_WARN, "LAN91x: Received frame alignment error\n"));\r
- // Don't seem to keep track of these specifically\r
- LanDriver->Stats.RxDroppedFrames += 1;\r
- Status = EFI_DEVICE_ERROR;\r
- goto exit_release;\r
- }\r
-\r
- // Classify the received fram\r
- if ((PktStatus & RX_MULTICAST) != 0) {\r
- LanDriver->Stats.RxMulticastFrames += 1;\r
- } else if ((PktStatus & RX_BROADCAST) != 0) {\r
- LanDriver->Stats.RxBroadcastFrames += 1;\r
- } else {\r
- LanDriver->Stats.RxUnicastFrames += 1;\r
- }\r
-\r
- // Calculate the received packet data length\r
- PktLength -= LAN91X_PKT_OVERHEAD;\r
- if ((PktStatus & RX_ODD_FRAME) != 0) {\r
- PktLength += 1;\r
- }\r
-\r
- // Check buffer size\r
- if (*BuffSize < PktLength) {\r
- DEBUG ((DEBUG_WARN, "LAN91x: Receive buffer too small for packet (%d < %d)\n",\r
- *BuffSize, PktLength));\r
- *BuffSize = PktLength;\r
- Status = EFI_BUFFER_TOO_SMALL;\r
- goto exit_release;\r
- }\r
-\r
- // Transfer the data bytes\r
- DataPtr = Data;\r
- ReadIoData (LanDriver, DataPtr, PktLength & ~0x0001);\r
-\r
- // Read the PktControl and Odd Byte from the FIFO\r
- PktControl = ReadIoReg16 (LanDriver, LAN91X_DATA0);\r
- if ((PktControl & PCW_ODD) != 0) {\r
- DataPtr[PktLength - 1] = PktControl & PCW_ODD_BYTE;\r
- }\r
-\r
- // Update buffer size\r
- *BuffSize = PktLength;\r
-\r
- if (HdrSize != NULL) {\r
- *HdrSize = LanDriver->SnpMode.MediaHeaderSize;\r
- }\r
-\r
- // Extract the destination address\r
- if (DstAddr != NULL) {\r
- CopyMem (DstAddr, &DataPtr[0], NET_ETHER_ADDR_LEN);\r
- }\r
-\r
- // Get the source address\r
- if (SrcAddr != NULL) {\r
- CopyMem (SrcAddr, &DataPtr[6], NET_ETHER_ADDR_LEN);\r
- }\r
-\r
- // Get the protocol\r
- if (Protocol != NULL) {\r
- *Protocol = NTOHS (*(UINT16*)(&DataPtr[12]));\r
- }\r
-\r
- // Update the Rx statistics\r
- LanDriver->Stats.RxTotalBytes += PktLength;\r
- LanDriver->Stats.RxGoodFrames += 1;\r
- Status = EFI_SUCCESS;\r
-\r
-#if LAN91X_PRINT_PACKET_HEADERS\r
- // Dump the packet header\r
- DEBUG ((DEBUG_ERROR, "LAN91X:SnpReceive()\n"));\r
- DEBUG ((DEBUG_ERROR, " HdrSize: %p, SrcAddr: %p, DstAddr: %p, Protocol: %p\n",\r
- HdrSize, SrcAddr, DstAddr, Protocol));\r
- DEBUG ((DEBUG_ERROR, " Length: %d, Last byte: %02x\n", PktLength, DataPtr[PktLength - 1]));\r
- PrintIpDgram (&DataPtr[0], &DataPtr[6], &DataPtr[12], &DataPtr[14]);\r
-#endif\r
-\r
- // Release the FIFO buffer\r
-exit_release:\r
- MmuOperation (LanDriver, MMUCR_OP_RX_POP_REL);\r
-\r
- // Restore TPL and return\r
-exit_unlock:\r
- gBS->RestoreTPL (SavedTpl);\r
- return Status;\r
-}\r
-\r
-\r
-/*------------------ Driver Execution Environment main entry point ------------------*/\r
-\r
-/*\r
-** Entry point for the LAN91x driver\r
-**\r
-*/\r
-EFI_STATUS\r
-Lan91xDxeEntry (\r
- IN EFI_HANDLE Handle,\r
- IN EFI_SYSTEM_TABLE *SystemTable\r
- )\r
-{\r
- EFI_STATUS Status;\r
- LAN91X_DRIVER *LanDriver;\r
- EFI_SIMPLE_NETWORK_PROTOCOL *Snp;\r
- EFI_SIMPLE_NETWORK_MODE *SnpMode;\r
- LAN91X_DEVICE_PATH *Lan91xPath;\r
-\r
- // The PcdLan91xDxeBaseAddress PCD must be defined\r
- ASSERT(PcdGet32 (PcdLan91xDxeBaseAddress) != 0);\r
-\r
- // Allocate Resources\r
- LanDriver = AllocateZeroPool (sizeof(LAN91X_DRIVER));\r
- Lan91xPath = AllocateCopyPool (sizeof(LAN91X_DEVICE_PATH), &Lan91xPathTemplate);\r
-\r
- // Initialize I/O Space access info\r
- LanDriver->IoBase = PcdGet32 (PcdLan91xDxeBaseAddress);\r
- LanDriver->PhyAd = LAN91X_NO_PHY;\r
- LanDriver->BankSel = 0xff;\r
-\r
- // Initialize pointers\r
- Snp = &(LanDriver->Snp);\r
- SnpMode = &(LanDriver->SnpMode);\r
- Snp->Mode = SnpMode;\r
-\r
- // Set the signature of the LAN Driver structure\r
- LanDriver->Signature = LAN91X_SIGNATURE;\r
-\r
- // Probe the device\r
- Status = Probe (LanDriver);\r
- if (EFI_ERROR(Status)) {\r
- DEBUG ((DEBUG_ERROR, "LAN91x:Lan91xDxeEntry(): Probe failed with status %d\n", Status));\r
- return Status;\r
- }\r
-\r
-#ifdef LAN91X_PRINT_REGISTERS\r
- PrintIoRegisters (LanDriver);\r
- PrintPhyRegisters (LanDriver);\r
-#endif\r
-\r
- // Initialize transmit queue\r
- InitializeListHead (&LanDriver->TransmitQueueHead);\r
-\r
- // Assign fields and func pointers\r
- Snp->Revision = EFI_SIMPLE_NETWORK_PROTOCOL_REVISION;\r
- Snp->WaitForPacket = NULL;\r
- Snp->Initialize = SnpInitialize;\r
- Snp->Start = SnpStart;\r
- Snp->Stop = SnpStop;\r
- Snp->Reset = SnpReset;\r
- Snp->Shutdown = SnpShutdown;\r
- Snp->ReceiveFilters = SnpReceiveFilters;\r
- Snp->StationAddress = SnpStationAddress;\r
- Snp->Statistics = SnpStatistics;\r
- Snp->MCastIpToMac = SnpMcastIptoMac;\r
- Snp->NvData = SnpNvData;\r
- Snp->GetStatus = SnpGetStatus;\r
- Snp->Transmit = SnpTransmit;\r
- Snp->Receive = SnpReceive;\r
-\r
- // Fill in simple network mode structure\r
- SnpMode->State = EfiSimpleNetworkStopped;\r
- SnpMode->HwAddressSize = NET_ETHER_ADDR_LEN; // HW address is 6 bytes\r
- SnpMode->MediaHeaderSize = sizeof(ETHER_HEAD); // Size of an Ethernet header\r
- SnpMode->MaxPacketSize = EFI_PAGE_SIZE; // Ethernet Frame (with VLAN tag +4 bytes)\r
-\r
- // Supported receive filters\r
- SnpMode->ReceiveFilterMask = EFI_SIMPLE_NETWORK_RECEIVE_UNICAST |\r
- EFI_SIMPLE_NETWORK_RECEIVE_MULTICAST |\r
- EFI_SIMPLE_NETWORK_RECEIVE_BROADCAST |\r
- EFI_SIMPLE_NETWORK_RECEIVE_PROMISCUOUS |\r
- EFI_SIMPLE_NETWORK_RECEIVE_PROMISCUOUS_MULTICAST;\r
-\r
- // Initially-enabled receive filters\r
- SnpMode->ReceiveFilterSetting = EFI_SIMPLE_NETWORK_RECEIVE_UNICAST |\r
- EFI_SIMPLE_NETWORK_RECEIVE_MULTICAST |\r
- EFI_SIMPLE_NETWORK_RECEIVE_BROADCAST;\r
-\r
- // LAN91x has 64bit hash table. We can filter an infinite MACs, but\r
- // higher-level software must filter out any hash collisions.\r
- SnpMode->MaxMCastFilterCount = MAX_MCAST_FILTER_CNT;\r
- SnpMode->MCastFilterCount = 0;\r
- ZeroMem (&SnpMode->MCastFilter, MAX_MCAST_FILTER_CNT * sizeof(EFI_MAC_ADDRESS));\r
-\r
- // Set the interface type (1: Ethernet or 6: IEEE 802 Networks)\r
- SnpMode->IfType = NET_IFTYPE_ETHERNET;\r
-\r
- // Mac address is changeable\r
- SnpMode->MacAddressChangeable = TRUE;\r
-\r
- // We can only transmit one packet at a time\r
- SnpMode->MultipleTxSupported = FALSE;\r
-\r
- // MediaPresent checks for cable connection and partner link\r
- SnpMode->MediaPresentSupported = TRUE;\r
- SnpMode->MediaPresent = FALSE;\r
-\r
- // Set broadcast address\r
- SetMem (&SnpMode->BroadcastAddress, sizeof (EFI_MAC_ADDRESS), 0xFF);\r
-\r
- // Assign fields for device path\r
- Lan91xPath->Lan91x.MacAddress = SnpMode->PermanentAddress;\r
- Lan91xPath->Lan91x.IfType = SnpMode->IfType;\r
-\r
- // Initialise the protocol\r
- Status = gBS->InstallMultipleProtocolInterfaces (\r
- &LanDriver->ControllerHandle,\r
- &gEfiSimpleNetworkProtocolGuid, Snp,\r
- &gEfiDevicePathProtocolGuid, Lan91xPath,\r
- NULL\r
- );\r
-\r
- // Say what the status of loading the protocol structure is\r
- if (EFI_ERROR(Status)) {\r
- FreePool (LanDriver);\r
- }\r
-\r
- return Status;\r
-}\r
projects / mirror_edk2.git / blobdiff