-/** @file
- Library that helps implement monolithic PEI. (SEC goes to DXE)
-
- Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>
-
- This program and the accompanying materials
- are licensed and made available under the terms and conditions of the BSD License
- which accompanies this distribution. The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-#ifndef __PRE_PI_LIB_H__
-#define __PRE_PI_LIB_H__
-
-#include <Guid/ExtractSection.h>
-
-/**
- This service enables discovery of additional firmware volumes.
-
- @param Instance This instance of the firmware volume to find. The value 0 is the
- Boot Firmware Volume (BFV).
- @param FwVolHeader Pointer to the firmware volume header of the volume to return.
-
- @retval EFI_SUCCESS The volume was found.
- @retval EFI_NOT_FOUND The volume was not found.
- @retval EFI_INVALID_PARAMETER FwVolHeader is NULL.
-
-**/
-EFI_STATUS
-EFIAPI
-FfsFindNextVolume (
- IN UINTN Instance,
- IN OUT EFI_PEI_FV_HANDLE *VolumeHandle
- );
-
-
-/**
- This service enables discovery of additional firmware files.
-
- @param SearchType A filter to find files only of this type.
- @param FwVolHeader Pointer to the firmware volume header of the volume to search.
- This parameter must point to a valid FFS volume.
- @param FileHeader Pointer to the current file from which to begin searching.
-
- @retval EFI_SUCCESS The file was found.
- @retval EFI_NOT_FOUND The file was not found.
- @retval EFI_NOT_FOUND The header checksum was not zero.
-
-**/
-EFI_STATUS
-EFIAPI
-FfsFindNextFile (
- IN EFI_FV_FILETYPE SearchType,
- IN EFI_PEI_FV_HANDLE VolumeHandle,
- IN OUT EFI_PEI_FILE_HANDLE *FileHandle
- );
-
-
-/**
- This service enables discovery sections of a given type within a valid FFS file.
-
- @param SearchType The value of the section type to find.
- @param FfsFileHeader A pointer to the file header that contains the set of sections to
- be searched.
- @param SectionData A pointer to the discovered section, if successful.
-
- @retval EFI_SUCCESS The section was found.
- @retval EFI_NOT_FOUND The section was not found.
-
-**/
-EFI_STATUS
-EFIAPI
-FfsFindSectionData (
- IN EFI_SECTION_TYPE SectionType,
- IN EFI_PEI_FILE_HANDLE FileHandle,
- OUT VOID **SectionData
- );
-
-
-/**
- Find a file in the volume by name
-
- @param FileName A pointer to the name of the file to
- find within the firmware volume.
-
- @param VolumeHandle The firmware volume to search FileHandle
- Upon exit, points to the found file's
- handle or NULL if it could not be found.
-
- @retval EFI_SUCCESS File was found.
-
- @retval EFI_NOT_FOUND File was not found.
-
- @retval EFI_INVALID_PARAMETER VolumeHandle or FileHandle or
- FileName was NULL.
-
-**/
-EFI_STATUS
-EFIAPI
-FfsFindByName (
- IN CONST EFI_GUID *FileName,
- IN CONST EFI_PEI_FV_HANDLE VolumeHandle,
- OUT EFI_PEI_FILE_HANDLE *FileHandle
- );
-
-
-/**
- Get information about the file by name.
-
- @param FileHandle Handle of the file.
-
- @param FileInfo Upon exit, points to the file's
- information.
-
- @retval EFI_SUCCESS File information returned.
-
- @retval EFI_INVALID_PARAMETER If FileHandle does not
- represent a valid file.
-
- @retval EFI_INVALID_PARAMETER If FileInfo is NULL.
-
-**/
-EFI_STATUS
-EFIAPI
-FfsGetFileInfo (
- IN CONST EFI_PEI_FILE_HANDLE FileHandle,
- OUT EFI_FV_FILE_INFO *FileInfo
- );
-
-
-/**
- Get Information about the volume by name
-
- @param VolumeHandle Handle of the volume.
-
- @param VolumeInfo Upon exit, points to the volume's
- information.
-
- @retval EFI_SUCCESS File information returned.
-
- @retval EFI_INVALID_PARAMETER If FileHandle does not
- represent a valid file.
-
- @retval EFI_INVALID_PARAMETER If FileInfo is NULL.
-
-**/
-EFI_STATUS
-EFIAPI
-FfsGetVolumeInfo (
- IN EFI_PEI_FV_HANDLE VolumeHandle,
- OUT EFI_FV_INFO *VolumeInfo
- );
-
-
-
-/**
- Get Fv image from the FV type file, then add FV & FV2 Hob.
-
- @param FileHandle File handle of a Fv type file.
-
-
- @retval EFI_NOT_FOUND FV image can't be found.
- @retval EFI_SUCCESS Successfully to process it.
-
-**/
-EFI_STATUS
-EFIAPI
-FfsProcessFvFile (
- IN EFI_PEI_FILE_HANDLE FvFileHandle
- );
-
-
-/**
- Search through every FV until you find a file of type FileType
-
- @param FileType File handle of a Fv type file.
- @param Volumehandle On succes Volume Handle of the match
- @param FileHandle On success File Handle of the match
-
- @retval EFI_NOT_FOUND FV image can't be found.
- @retval EFI_SUCCESS Successfully found FileType
-
-**/
-EFI_STATUS
-EFIAPI
-FfsAnyFvFindFirstFile (
- IN EFI_FV_FILETYPE FileType,
- OUT EFI_PEI_FV_HANDLE *VolumeHandle,
- OUT EFI_PEI_FILE_HANDLE *FileHandle
- );
-
-
-/**
- Get Fv image from the FV type file, then add FV & FV2 Hob.
-
- @param FileHandle File handle of a Fv type file.
-
-
- @retval EFI_NOT_FOUND FV image can't be found.
- @retval EFI_SUCCESS Successfully to process it.
-
-**/
-EFI_STATUS
-EFIAPI
-FfsProcessFvFile (
- IN EFI_PEI_FILE_HANDLE FvFileHandle
- );
-
-
-/**
- This service enables PEIMs to ascertain the present value of the boot mode.
-
-
- @retval BootMode
-
-**/
-EFI_BOOT_MODE
-EFIAPI
-GetBootMode (
- VOID
- );
-
-
-/**
- This service enables PEIMs to update the boot mode variable.
-
- @param BootMode The value of the boot mode to set.
-
- @retval EFI_SUCCESS The value was successfully updated
-
-**/
-EFI_STATUS
-EFIAPI
-SetBootMode (
- IN EFI_BOOT_MODE BootMode
- );
-
-/**
- This service enables a PEIM to ascertain the address of the list of HOBs in memory.
-
- @param HobList A pointer to the list of HOBs that the PEI Foundation will initialize.
-
- @retval EFI_SUCCESS The list was successfully returned.
- @retval EFI_NOT_AVAILABLE_YET The HOB list is not yet published.
-
-**/
-VOID *
-EFIAPI
-GetHobList (
- VOID
- );
-
-
-/**
- Updates the pointer to the HOB list.
-
- @param HobList Hob list pointer to store
-
-**/
-EFI_STATUS
-EFIAPI
-SetHobList (
- IN VOID *HobList
- );
-
-
-/**
- Retrieves the magic value from the PE/COFF header.
-
- @param Hdr The buffer in which to return the PE32, PE32+, or TE header.
-
- @return EFI_IMAGE_NT_OPTIONAL_HDR32_MAGIC - Image is PE32
- @return EFI_IMAGE_NT_OPTIONAL_HDR64_MAGIC - Image is PE32+
-
-**/
-VOID
-CreateHobList (
- IN VOID *MemoryBegin,
- IN UINTN MemoryLength,
- IN VOID *HobBase,
- IN VOID *StackBase
- );
-
-
-/**
- This service enables PEIMs to create various types of HOBs.
-
- @param Type The type of HOB to be installed.
- @param Length The length of the HOB to be added.
-
- @retval !NULL The HOB was successfully created.
- @retval NULL There is no additional space for HOB creation.
-
-**/
-VOID *
-CreateHob (
- IN UINT16 HobType,
- IN UINT16 HobLenght
- );
-
-
-/**
- Returns the next instance of a HOB type from the starting HOB.
-
- This function searches the first instance of a HOB type from the starting HOB pointer.
- If there does not exist such HOB type from the starting HOB pointer, it will return NULL.
- In contrast with macro GET_NEXT_HOB(), this function does not skip the starting HOB pointer
- unconditionally: it returns HobStart back if HobStart itself meets the requirement;
- caller is required to use GET_NEXT_HOB() if it wishes to skip current HobStart.
- If HobStart is NULL, then ASSERT().
-
- @param Type The HOB type to return.
- @param HobStart The starting HOB pointer to search from.
-
- @return The next instance of a HOB type from the starting HOB.
-
-**/
-VOID *
-EFIAPI
-GetNextHob (
- IN UINT16 Type,
- IN CONST VOID *HobStart
- );
-
-/**
- Returns the first instance of a HOB type among the whole HOB list.
-
- This function searches the first instance of a HOB type among the whole HOB list.
- If there does not exist such HOB type in the HOB list, it will return NULL.
-
- @param Type The HOB type to return.
-
- @return The next instance of a HOB type from the starting HOB.
-
-**/
-VOID *
-EFIAPI
-GetFirstHob (
- IN UINT16 Type
- );
-
-/**
- This function searches the first instance of a HOB from the starting HOB pointer.
- Such HOB should satisfy two conditions:
- its HOB type is EFI_HOB_TYPE_GUID_EXTENSION and its GUID Name equals to the input Guid.
- If there does not exist such HOB from the starting HOB pointer, it will return NULL.
- Caller is required to apply GET_GUID_HOB_DATA () and GET_GUID_HOB_DATA_SIZE ()
- to extract the data section and its size info respectively.
- In contrast with macro GET_NEXT_HOB(), this function does not skip the starting HOB pointer
- unconditionally: it returns HobStart back if HobStart itself meets the requirement;
- caller is required to use GET_NEXT_HOB() if it wishes to skip current HobStart.
- If Guid is NULL, then ASSERT().
- If HobStart is NULL, then ASSERT().
-
- @param Guid The GUID to match with in the HOB list.
- @param HobStart A pointer to a Guid.
-
- @return The next instance of the matched GUID HOB from the starting HOB.
-
-**/
-VOID *
-EFIAPI
-GetNextGuidHob (
- IN CONST EFI_GUID *Guid,
- IN CONST VOID *HobStart
- );
-
-/**
- This function searches the first instance of a HOB among the whole HOB list.
- Such HOB should satisfy two conditions:
- its HOB type is EFI_HOB_TYPE_GUID_EXTENSION and its GUID Name equals to the input Guid.
- If there does not exist such HOB from the starting HOB pointer, it will return NULL.
- Caller is required to apply GET_GUID_HOB_DATA () and GET_GUID_HOB_DATA_SIZE ()
- to extract the data section and its size info respectively.
- If Guid is NULL, then ASSERT().
-
- @param Guid The GUID to match with in the HOB list.
-
- @return The first instance of the matched GUID HOB among the whole HOB list.
-
-**/
-VOID *
-EFIAPI
-GetFirstGuidHob (
- IN CONST EFI_GUID *Guid
- );
-
-
-/**
- Builds a HOB for a loaded PE32 module.
-
- This function builds a HOB for a loaded PE32 module.
- It can only be invoked during PEI phase;
- for DXE phase, it will ASSERT() since PEI HOB is read-only for DXE phase.
- If ModuleName is NULL, then ASSERT().
- If there is no additional space for HOB creation, then ASSERT().
-
- @param ModuleName The GUID File Name of the module.
- @param MemoryAllocationModule The 64 bit physical address of the module.
- @param ModuleLength The length of the module in bytes.
- @param EntryPoint The 64 bit physical address of the module entry point.
-
-**/
-VOID
-EFIAPI
-BuildModuleHob (
- IN CONST EFI_GUID *ModuleName,
- IN EFI_PHYSICAL_ADDRESS MemoryAllocationModule,
- IN UINT64 ModuleLength,
- IN EFI_PHYSICAL_ADDRESS EntryPoint
- );
-
-/**
- Builds a HOB that describes a chunk of system memory.
-
- This function builds a HOB that describes a chunk of system memory.
- It can only be invoked during PEI phase;
- for DXE phase, it will ASSERT() since PEI HOB is read-only for DXE phase.
- If there is no additional space for HOB creation, then ASSERT().
-
- @param ResourceType The type of resource described by this HOB.
- @param ResourceAttribute The resource attributes of the memory described by this HOB.
- @param PhysicalStart The 64 bit physical address of memory described by this HOB.
- @param NumberOfBytes The length of the memory described by this HOB in bytes.
-
-**/
-VOID
-EFIAPI
-BuildResourceDescriptorHob (
- IN EFI_RESOURCE_TYPE ResourceType,
- IN EFI_RESOURCE_ATTRIBUTE_TYPE ResourceAttribute,
- IN EFI_PHYSICAL_ADDRESS PhysicalStart,
- IN UINT64 NumberOfBytes
- );
-
-/**
- Builds a GUID HOB with a certain data length.
-
- This function builds a customized HOB tagged with a GUID for identification
- and returns the start address of GUID HOB data so that caller can fill the customized data.
- The HOB Header and Name field is already stripped.
- It can only be invoked during PEI phase;
- for DXE phase, it will ASSERT() since PEI HOB is read-only for DXE phase.
- If Guid is NULL, then ASSERT().
- If there is no additional space for HOB creation, then ASSERT().
- If DataLength >= (0x10000 - sizeof (EFI_HOB_GUID_TYPE)), then ASSERT().
-
- @param Guid The GUID to tag the customized HOB.
- @param DataLength The size of the data payload for the GUID HOB.
-
- @return The start address of GUID HOB data.
-
-**/
-VOID *
-EFIAPI
-BuildGuidHob (
- IN CONST EFI_GUID *Guid,
- IN UINTN DataLength
- );
-
-/**
- Copies a data buffer to a newly-built HOB.
-
- This function builds a customized HOB tagged with a GUID for identification,
- copies the input data to the HOB data field and returns the start address of the GUID HOB data.
- The HOB Header and Name field is already stripped.
- It can only be invoked during PEI phase;
- for DXE phase, it will ASSERT() since PEI HOB is read-only for DXE phase.
- If Guid is NULL, then ASSERT().
- If Data is NULL and DataLength > 0, then ASSERT().
- If there is no additional space for HOB creation, then ASSERT().
- If DataLength >= (0x10000 - sizeof (EFI_HOB_GUID_TYPE)), then ASSERT().
-
- @param Guid The GUID to tag the customized HOB.
- @param Data The data to be copied into the data field of the GUID HOB.
- @param DataLength The size of the data payload for the GUID HOB.
-
- @return The start address of GUID HOB data.
-
-**/
-VOID *
-EFIAPI
-BuildGuidDataHob (
- IN CONST EFI_GUID *Guid,
- IN VOID *Data,
- IN UINTN DataLength
- );
-
-/**
- Builds a Firmware Volume HOB.
-
- This function builds a Firmware Volume HOB.
- It can only be invoked during PEI phase;
- for DXE phase, it will ASSERT() since PEI HOB is read-only for DXE phase.
- If there is no additional space for HOB creation, then ASSERT().
-
- @param BaseAddress The base address of the Firmware Volume.
- @param Length The size of the Firmware Volume in bytes.
-
-**/
-VOID
-EFIAPI
-BuildFvHob (
- IN EFI_PHYSICAL_ADDRESS BaseAddress,
- IN UINT64 Length
- );
-
-/**
- Builds a Firmware Volume HOB and a resrouce descriptor hob
-
- This function builds a Firmware Volume HOB.
- It can only be invoked during PEI phase;
- for DXE phase, it will ASSERT() since PEI HOB is read-only for DXE phase.
- If there is no additional space for HOB creation, then ASSERT().
-
- @param BaseAddress The base address of the Firmware Volume.
- @param Length The size of the Firmware Volume in bytes.
-
-**/
-VOID
-EFIAPI
-BuildFvHobs (
- IN EFI_PHYSICAL_ADDRESS PhysicalStart,
- IN UINT64 NumberOfBytes,
- IN EFI_RESOURCE_ATTRIBUTE_TYPE *ResourceAttribute OPTIONAL
- );
-
-
-/**
- Builds a EFI_HOB_TYPE_FV2 HOB.
-
- This function builds a EFI_HOB_TYPE_FV2 HOB.
- It can only be invoked during PEI phase;
- for DXE phase, it will ASSERT() since PEI HOB is read-only for DXE phase.
- If there is no additional space for HOB creation, then ASSERT().
-
- @param BaseAddress The base address of the Firmware Volume.
- @param Length The size of the Firmware Volume in bytes.
- @param FvName The name of the Firmware Volume.
- @param FileName The name of the file.
-
-**/
-VOID
-EFIAPI
-BuildFv2Hob (
- IN EFI_PHYSICAL_ADDRESS BaseAddress,
- IN UINT64 Length,
- IN CONST EFI_GUID *FvName,
- IN CONST EFI_GUID *FileName
- );
-
-/**
- Builds a Capsule Volume HOB.
-
- This function builds a Capsule Volume HOB.
- It can only be invoked during PEI phase;
- for DXE phase, it will ASSERT() since PEI HOB is read-only for DXE phase.
- If there is no additional space for HOB creation, then ASSERT().
-
- @param BaseAddress The base address of the Capsule Volume.
- @param Length The size of the Capsule Volume in bytes.
-
-**/
-VOID
-EFIAPI
-BuildCvHob (
- IN EFI_PHYSICAL_ADDRESS BaseAddress,
- IN UINT64 Length
- );
-
-/**
- Builds a HOB for the CPU.
-
- This function builds a HOB for the CPU.
- It can only be invoked during PEI phase;
- for DXE phase, it will ASSERT() since PEI HOB is read-only for DXE phase.
- If there is no additional space for HOB creation, then ASSERT().
-
- @param SizeOfMemorySpace The maximum physical memory addressability of the processor.
- @param SizeOfIoSpace The maximum physical I/O addressability of the processor.
-
-**/
-VOID
-EFIAPI
-BuildCpuHob (
- IN UINT8 SizeOfMemorySpace,
- IN UINT8 SizeOfIoSpace
- );
-
-/**
- Builds a HOB for the Stack.
-
- This function builds a HOB for the stack.
- It can only be invoked during PEI phase;
- for DXE phase, it will ASSERT() since PEI HOB is read-only for DXE phase.
- If there is no additional space for HOB creation, then ASSERT().
-
- @param BaseAddress The 64 bit physical address of the Stack.
- @param Length The length of the stack in bytes.
-
-**/
-VOID
-EFIAPI
-BuildStackHob (
- IN EFI_PHYSICAL_ADDRESS BaseAddress,
- IN UINT64 Length
- );
-
-/**
- Update the Stack Hob if the stack has been moved
-
- @param BaseAddress The 64 bit physical address of the Stack.
- @param Length The length of the stack in bytes.
-
-**/
-VOID
-UpdateStackHob (
- IN EFI_PHYSICAL_ADDRESS BaseAddress,
- IN UINT64 Length
- );
-
-
-/**
- Builds a HOB for the BSP store.
-
- This function builds a HOB for BSP store.
- It can only be invoked during PEI phase;
- for DXE phase, it will ASSERT() since PEI HOB is read-only for DXE phase.
- If there is no additional space for HOB creation, then ASSERT().
-
- @param BaseAddress The 64 bit physical address of the BSP.
- @param Length The length of the BSP store in bytes.
- @param MemoryType Type of memory allocated by this HOB.
-
-**/
-VOID
-EFIAPI
-BuildBspStoreHob (
- IN EFI_PHYSICAL_ADDRESS BaseAddress,
- IN UINT64 Length,
- IN EFI_MEMORY_TYPE MemoryType
- );
-
-/**
- Builds a HOB for the memory allocation.
-
- This function builds a HOB for the memory allocation.
- It can only be invoked during PEI phase;
- for DXE phase, it will ASSERT() since PEI HOB is read-only for DXE phase.
- If there is no additional space for HOB creation, then ASSERT().
-
- @param BaseAddress The 64 bit physical address of the memory.
- @param Length The length of the memory allocation in bytes.
- @param MemoryType Type of memory allocated by this HOB.
-
-**/
-VOID
-EFIAPI
-BuildMemoryAllocationHob (
- IN EFI_PHYSICAL_ADDRESS BaseAddress,
- IN UINT64 Length,
- IN EFI_MEMORY_TYPE MemoryType
- );
-
-
-VOID
-EFIAPI
-BuildExtractSectionHob (
- IN EFI_GUID *Guid,
- IN EXTRACT_GUIDED_SECTION_GET_INFO_HANDLER SectionGetInfo,
- IN EXTRACT_GUIDED_SECTION_DECODE_HANDLER SectionExtraction
- );
-
-VOID
-EFIAPI
-BuildPeCoffLoaderHob (
- VOID
- );
-
-
-/**
- Allocates one or more 4KB pages of type EfiBootServicesData.
-
- Allocates the number of 4KB pages of MemoryType and returns a pointer to the
- allocated buffer. The buffer returned is aligned on a 4KB boundary. If Pages is 0, then NULL
- is returned. If there is not enough memory remaining to satisfy the request, then NULL is
- returned.
-
- @param Pages The number of 4 KB pages to allocate.
-
- @return A pointer to the allocated buffer or NULL if allocation fails.
-
-**/
-VOID *
-EFIAPI
-AllocatePages (
- IN UINTN Pages
- );
-
-/**
- Allocates a buffer of type EfiBootServicesData.
-
- Allocates the number bytes specified by AllocationSize of type EfiBootServicesData and returns a
- pointer to the allocated buffer. If AllocationSize is 0, then a valid buffer of 0 size is
- returned. If there is not enough memory remaining to satisfy the request, then NULL is returned.
-
- @param AllocationSize The number of bytes to allocate.
-
- @return A pointer to the allocated buffer or NULL if allocation fails.
-
-**/
-VOID *
-EFIAPI
-AllocatePool (
- IN UINTN AllocationSize
- );
-
-
-/**
- Allocates one or more 4KB pages of type EfiBootServicesData at a specified alignment.
-
- Allocates the number of 4KB pages specified by Pages of type EfiBootServicesData with an
- alignment specified by Alignment. The allocated buffer is returned. If Pages is 0, then NULL is
- returned. If there is not enough memory at the specified alignment remaining to satisfy the
- request, then NULL is returned.
- If Alignment is not a power of two and Alignment is not zero, then ASSERT().
-
- @param Pages The number of 4 KB pages to allocate.
- @param Alignment The requested alignment of the allocation. Must be a power of two.
- If Alignment is zero, then byte alignment is used.
-
- @return A pointer to the allocated buffer or NULL if allocation fails.
-
-**/
-VOID *
-EFIAPI
-AllocateAlignedPages (
- IN UINTN Pages,
- IN UINTN Alignment
- );
-
-
-EFI_STATUS
-EFIAPI
-LoadPeCoffImage (
- IN VOID *PeCoffImage,
- OUT EFI_PHYSICAL_ADDRESS *ImageAddress,
- OUT UINT64 *ImageSize,
- OUT EFI_PHYSICAL_ADDRESS *EntryPoint
- );
-
-EFI_STATUS
-EFIAPI
-LoadDxeCoreFromFfsFile (
- IN EFI_PEI_FILE_HANDLE FileHandle,
- IN UINTN StackSize
- );
-
-EFI_STATUS
-EFIAPI
-LoadDxeCoreFromFv (
- IN UINTN *FvInstance, OPTIONAL
- IN UINTN StackSize
- );
-
-EFI_STATUS
-EFIAPI
-DecompressFirstFv (
- VOID
- );
-
-VOID
-EFIAPI
-AddDxeCoreReportStatusCodeCallback (
- VOID
- );
-
-
-#endif
+/** @file\r
+ Library that helps implement monolithic PEI. (SEC goes to DXE)\r
+\r
+ Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>\r
+\r
+ This program and the accompanying materials\r
+ are licensed and made available under the terms and conditions of the BSD License\r
+ which accompanies this distribution. The full text of the license may be found at\r
+ http://opensource.org/licenses/bsd-license.php\r
+\r
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
+\r
+**/\r
+\r
+#ifndef __PRE_PI_LIB_H__\r
+#define __PRE_PI_LIB_H__\r
+\r
+#include <Guid/ExtractSection.h>\r
+\r
+/**\r
+ This service enables discovery of additional firmware volumes.\r
+\r
+ @param Instance This instance of the firmware volume to find. The value 0 is the\r
+ Boot Firmware Volume (BFV).\r
+ @param FwVolHeader Pointer to the firmware volume header of the volume to return.\r
+\r
+ @retval EFI_SUCCESS The volume was found.\r
+ @retval EFI_NOT_FOUND The volume was not found.\r
+ @retval EFI_INVALID_PARAMETER FwVolHeader is NULL.\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+FfsFindNextVolume (\r
+ IN UINTN Instance,\r
+ IN OUT EFI_PEI_FV_HANDLE *VolumeHandle\r
+ );\r
+\r
+\r
+/**\r
+ This service enables discovery of additional firmware files.\r
+\r
+ @param SearchType A filter to find files only of this type.\r
+ @param FwVolHeader Pointer to the firmware volume header of the volume to search.\r
+ This parameter must point to a valid FFS volume.\r
+ @param FileHeader Pointer to the current file from which to begin searching.\r
+\r
+ @retval EFI_SUCCESS The file was found.\r
+ @retval EFI_NOT_FOUND The file was not found.\r
+ @retval EFI_NOT_FOUND The header checksum was not zero.\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+FfsFindNextFile (\r
+ IN EFI_FV_FILETYPE SearchType,\r
+ IN EFI_PEI_FV_HANDLE VolumeHandle,\r
+ IN OUT EFI_PEI_FILE_HANDLE *FileHandle\r
+ );\r
+\r
+\r
+/**\r
+ This service enables discovery sections of a given type within a valid FFS file.\r
+\r
+ @param SearchType The value of the section type to find.\r
+ @param FfsFileHeader A pointer to the file header that contains the set of sections to\r
+ be searched.\r
+ @param SectionData A pointer to the discovered section, if successful.\r
+\r
+ @retval EFI_SUCCESS The section was found.\r
+ @retval EFI_NOT_FOUND The section was not found.\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+FfsFindSectionData (\r
+ IN EFI_SECTION_TYPE SectionType,\r
+ IN EFI_PEI_FILE_HANDLE FileHandle,\r
+ OUT VOID **SectionData\r
+ );\r
+\r
+\r
+/**\r
+ Find a file in the volume by name\r
+ \r
+ @param FileName A pointer to the name of the file to\r
+ find within the firmware volume.\r
+\r
+ @param VolumeHandle The firmware volume to search FileHandle\r
+ Upon exit, points to the found file's\r
+ handle or NULL if it could not be found.\r
+\r
+ @retval EFI_SUCCESS File was found.\r
+\r
+ @retval EFI_NOT_FOUND File was not found.\r
+\r
+ @retval EFI_INVALID_PARAMETER VolumeHandle or FileHandle or\r
+ FileName was NULL.\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+FfsFindByName (\r
+ IN CONST EFI_GUID *FileName,\r
+ IN CONST EFI_PEI_FV_HANDLE VolumeHandle,\r
+ OUT EFI_PEI_FILE_HANDLE *FileHandle\r
+ );\r
+\r
+\r
+/**\r
+ Get information about the file by name.\r
+\r
+ @param FileHandle Handle of the file.\r
+\r
+ @param FileInfo Upon exit, points to the file's\r
+ information.\r
+\r
+ @retval EFI_SUCCESS File information returned.\r
+ \r
+ @retval EFI_INVALID_PARAMETER If FileHandle does not\r
+ represent a valid file.\r
+ \r
+ @retval EFI_INVALID_PARAMETER If FileInfo is NULL.\r
+ \r
+**/\r
+EFI_STATUS\r
+EFIAPI \r
+FfsGetFileInfo (\r
+ IN CONST EFI_PEI_FILE_HANDLE FileHandle,\r
+ OUT EFI_FV_FILE_INFO *FileInfo\r
+ );\r
+\r
+\r
+/**\r
+ Get Information about the volume by name\r
+\r
+ @param VolumeHandle Handle of the volume.\r
+\r
+ @param VolumeInfo Upon exit, points to the volume's\r
+ information.\r
+\r
+ @retval EFI_SUCCESS File information returned.\r
+ \r
+ @retval EFI_INVALID_PARAMETER If FileHandle does not\r
+ represent a valid file.\r
+ \r
+ @retval EFI_INVALID_PARAMETER If FileInfo is NULL.\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+FfsGetVolumeInfo (\r
+ IN EFI_PEI_FV_HANDLE VolumeHandle,\r
+ OUT EFI_FV_INFO *VolumeInfo\r
+ );\r
+\r
+\r
+\r
+/**\r
+ Get Fv image from the FV type file, then add FV & FV2 Hob.\r
+\r
+ @param FileHandle File handle of a Fv type file.\r
+\r
+\r
+ @retval EFI_NOT_FOUND FV image can't be found.\r
+ @retval EFI_SUCCESS Successfully to process it.\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+FfsProcessFvFile (\r
+ IN EFI_PEI_FILE_HANDLE FvFileHandle\r
+ );\r
+\r
+\r
+/**\r
+ Search through every FV until you find a file of type FileType\r
+\r
+ @param FileType File handle of a Fv type file.\r
+ @param Volumehandle On succes Volume Handle of the match\r
+ @param FileHandle On success File Handle of the match\r
+ \r
+ @retval EFI_NOT_FOUND FV image can't be found.\r
+ @retval EFI_SUCCESS Successfully found FileType\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+FfsAnyFvFindFirstFile (\r
+ IN EFI_FV_FILETYPE FileType,\r
+ OUT EFI_PEI_FV_HANDLE *VolumeHandle,\r
+ OUT EFI_PEI_FILE_HANDLE *FileHandle\r
+ );\r
+\r
+\r
+/**\r
+ Get Fv image from the FV type file, then add FV & FV2 Hob.\r
+\r
+ @param FileHandle File handle of a Fv type file.\r
+\r
+\r
+ @retval EFI_NOT_FOUND FV image can't be found.\r
+ @retval EFI_SUCCESS Successfully to process it.\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+FfsProcessFvFile (\r
+ IN EFI_PEI_FILE_HANDLE FvFileHandle\r
+ );\r
+\r
+\r
+/**\r
+ This service enables PEIMs to ascertain the present value of the boot mode. \r
+\r
+\r
+ @retval BootMode \r
+\r
+**/\r
+EFI_BOOT_MODE\r
+EFIAPI\r
+GetBootMode (\r
+ VOID\r
+ );\r
+\r
+\r
+/**\r
+ This service enables PEIMs to update the boot mode variable. \r
+\r
+ @param BootMode The value of the boot mode to set.\r
+\r
+ @retval EFI_SUCCESS The value was successfully updated\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+SetBootMode (\r
+ IN EFI_BOOT_MODE BootMode\r
+ );\r
+\r
+/**\r
+ This service enables a PEIM to ascertain the address of the list of HOBs in memory.\r
+\r
+ @param HobList A pointer to the list of HOBs that the PEI Foundation will initialize.\r
+\r
+ @retval EFI_SUCCESS The list was successfully returned.\r
+ @retval EFI_NOT_AVAILABLE_YET The HOB list is not yet published.\r
+\r
+**/\r
+VOID *\r
+EFIAPI\r
+GetHobList (\r
+ VOID \r
+ );\r
+\r
+\r
+/**\r
+ Updates the pointer to the HOB list.\r
+\r
+ @param HobList Hob list pointer to store\r
+ \r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+SetHobList (\r
+ IN VOID *HobList\r
+ );\r
+\r
+EFI_HOB_HANDOFF_INFO_TABLE*\r
+HobConstructor (\r
+ IN VOID *EfiMemoryBegin,\r
+ IN UINTN EfiMemoryLength,\r
+ IN VOID *EfiFreeMemoryBottom,\r
+ IN VOID *EfiFreeMemoryTop\r
+ );\r
+\r
+/**\r
+ Retrieves the magic value from the PE/COFF header.\r
+\r
+ @param Hdr The buffer in which to return the PE32, PE32+, or TE header.\r
+\r
+ @return EFI_IMAGE_NT_OPTIONAL_HDR32_MAGIC - Image is PE32\r
+ @return EFI_IMAGE_NT_OPTIONAL_HDR64_MAGIC - Image is PE32+\r
+\r
+**/\r
+VOID\r
+CreateHobList (\r
+ IN VOID *MemoryBegin,\r
+ IN UINTN MemoryLength,\r
+ IN VOID *HobBase,\r
+ IN VOID *StackBase\r
+ );\r
+\r
+\r
+/**\r
+ This service enables PEIMs to create various types of HOBs.\r
+\r
+ @param Type The type of HOB to be installed.\r
+ @param Length The length of the HOB to be added.\r
+\r
+ @retval !NULL The HOB was successfully created.\r
+ @retval NULL There is no additional space for HOB creation.\r
+\r
+**/\r
+VOID *\r
+CreateHob (\r
+ IN UINT16 HobType,\r
+ IN UINT16 HobLenght\r
+ );\r
+\r
+\r
+/**\r
+ Returns the next instance of a HOB type from the starting HOB.\r
+\r
+ This function searches the first instance of a HOB type from the starting HOB pointer. \r
+ If there does not exist such HOB type from the starting HOB pointer, it will return NULL.\r
+ In contrast with macro GET_NEXT_HOB(), this function does not skip the starting HOB pointer\r
+ unconditionally: it returns HobStart back if HobStart itself meets the requirement;\r
+ caller is required to use GET_NEXT_HOB() if it wishes to skip current HobStart.\r
+ If HobStart is NULL, then ASSERT().\r
+\r
+ @param Type The HOB type to return.\r
+ @param HobStart The starting HOB pointer to search from.\r
+\r
+ @return The next instance of a HOB type from the starting HOB.\r
+\r
+**/\r
+VOID *\r
+EFIAPI\r
+GetNextHob (\r
+ IN UINT16 Type,\r
+ IN CONST VOID *HobStart\r
+ );\r
+\r
+/**\r
+ Returns the first instance of a HOB type among the whole HOB list.\r
+\r
+ This function searches the first instance of a HOB type among the whole HOB list. \r
+ If there does not exist such HOB type in the HOB list, it will return NULL. \r
+\r
+ @param Type The HOB type to return.\r
+\r
+ @return The next instance of a HOB type from the starting HOB.\r
+\r
+**/\r
+VOID *\r
+EFIAPI\r
+GetFirstHob (\r
+ IN UINT16 Type\r
+ );\r
+\r
+/**\r
+ This function searches the first instance of a HOB from the starting HOB pointer. \r
+ Such HOB should satisfy two conditions: \r
+ its HOB type is EFI_HOB_TYPE_GUID_EXTENSION and its GUID Name equals to the input Guid. \r
+ If there does not exist such HOB from the starting HOB pointer, it will return NULL. \r
+ Caller is required to apply GET_GUID_HOB_DATA () and GET_GUID_HOB_DATA_SIZE ()\r
+ to extract the data section and its size info respectively.\r
+ In contrast with macro GET_NEXT_HOB(), this function does not skip the starting HOB pointer\r
+ unconditionally: it returns HobStart back if HobStart itself meets the requirement;\r
+ caller is required to use GET_NEXT_HOB() if it wishes to skip current HobStart.\r
+ If Guid is NULL, then ASSERT().\r
+ If HobStart is NULL, then ASSERT().\r
+\r
+ @param Guid The GUID to match with in the HOB list.\r
+ @param HobStart A pointer to a Guid.\r
+\r
+ @return The next instance of the matched GUID HOB from the starting HOB.\r
+\r
+**/\r
+VOID *\r
+EFIAPI\r
+GetNextGuidHob (\r
+ IN CONST EFI_GUID *Guid,\r
+ IN CONST VOID *HobStart\r
+ );\r
+\r
+/**\r
+ This function searches the first instance of a HOB among the whole HOB list. \r
+ Such HOB should satisfy two conditions:\r
+ its HOB type is EFI_HOB_TYPE_GUID_EXTENSION and its GUID Name equals to the input Guid.\r
+ If there does not exist such HOB from the starting HOB pointer, it will return NULL.\r
+ Caller is required to apply GET_GUID_HOB_DATA () and GET_GUID_HOB_DATA_SIZE ()\r
+ to extract the data section and its size info respectively.\r
+ If Guid is NULL, then ASSERT().\r
+\r
+ @param Guid The GUID to match with in the HOB list.\r
+\r
+ @return The first instance of the matched GUID HOB among the whole HOB list.\r
+\r
+**/\r
+VOID *\r
+EFIAPI\r
+GetFirstGuidHob (\r
+ IN CONST EFI_GUID *Guid\r
+ );\r
+\r
+\r
+/**\r
+ Builds a HOB for a loaded PE32 module.\r
+\r
+ This function builds a HOB for a loaded PE32 module.\r
+ It can only be invoked during PEI phase;\r
+ for DXE phase, it will ASSERT() since PEI HOB is read-only for DXE phase.\r
+ If ModuleName is NULL, then ASSERT().\r
+ If there is no additional space for HOB creation, then ASSERT().\r
+\r
+ @param ModuleName The GUID File Name of the module.\r
+ @param MemoryAllocationModule The 64 bit physical address of the module.\r
+ @param ModuleLength The length of the module in bytes.\r
+ @param EntryPoint The 64 bit physical address of the module entry point.\r
+\r
+**/\r
+VOID\r
+EFIAPI\r
+BuildModuleHob (\r
+ IN CONST EFI_GUID *ModuleName,\r
+ IN EFI_PHYSICAL_ADDRESS MemoryAllocationModule,\r
+ IN UINT64 ModuleLength,\r
+ IN EFI_PHYSICAL_ADDRESS EntryPoint\r
+ );\r
+\r
+/**\r
+ Builds a HOB that describes a chunk of system memory.\r
+\r
+ This function builds a HOB that describes a chunk of system memory.\r
+ It can only be invoked during PEI phase;\r
+ for DXE phase, it will ASSERT() since PEI HOB is read-only for DXE phase.\r
+ If there is no additional space for HOB creation, then ASSERT().\r
+\r
+ @param ResourceType The type of resource described by this HOB.\r
+ @param ResourceAttribute The resource attributes of the memory described by this HOB.\r
+ @param PhysicalStart The 64 bit physical address of memory described by this HOB.\r
+ @param NumberOfBytes The length of the memory described by this HOB in bytes.\r
+\r
+**/\r
+VOID\r
+EFIAPI\r
+BuildResourceDescriptorHob (\r
+ IN EFI_RESOURCE_TYPE ResourceType,\r
+ IN EFI_RESOURCE_ATTRIBUTE_TYPE ResourceAttribute,\r
+ IN EFI_PHYSICAL_ADDRESS PhysicalStart,\r
+ IN UINT64 NumberOfBytes\r
+ );\r
+\r
+/**\r
+ Builds a GUID HOB with a certain data length.\r
+\r
+ This function builds a customized HOB tagged with a GUID for identification \r
+ and returns the start address of GUID HOB data so that caller can fill the customized data. \r
+ The HOB Header and Name field is already stripped.\r
+ It can only be invoked during PEI phase;\r
+ for DXE phase, it will ASSERT() since PEI HOB is read-only for DXE phase.\r
+ If Guid is NULL, then ASSERT().\r
+ If there is no additional space for HOB creation, then ASSERT().\r
+ If DataLength >= (0x10000 - sizeof (EFI_HOB_GUID_TYPE)), then ASSERT().\r
+\r
+ @param Guid The GUID to tag the customized HOB.\r
+ @param DataLength The size of the data payload for the GUID HOB.\r
+\r
+ @return The start address of GUID HOB data.\r
+\r
+**/\r
+VOID *\r
+EFIAPI\r
+BuildGuidHob (\r
+ IN CONST EFI_GUID *Guid,\r
+ IN UINTN DataLength\r
+ );\r
+\r
+/**\r
+ Copies a data buffer to a newly-built HOB.\r
+\r
+ This function builds a customized HOB tagged with a GUID for identification,\r
+ copies the input data to the HOB data field and returns the start address of the GUID HOB data.\r
+ The HOB Header and Name field is already stripped.\r
+ It can only be invoked during PEI phase;\r
+ for DXE phase, it will ASSERT() since PEI HOB is read-only for DXE phase.\r
+ If Guid is NULL, then ASSERT().\r
+ If Data is NULL and DataLength > 0, then ASSERT().\r
+ If there is no additional space for HOB creation, then ASSERT().\r
+ If DataLength >= (0x10000 - sizeof (EFI_HOB_GUID_TYPE)), then ASSERT().\r
+\r
+ @param Guid The GUID to tag the customized HOB.\r
+ @param Data The data to be copied into the data field of the GUID HOB.\r
+ @param DataLength The size of the data payload for the GUID HOB.\r
+\r
+ @return The start address of GUID HOB data.\r
+\r
+**/\r
+VOID *\r
+EFIAPI\r
+BuildGuidDataHob (\r
+ IN CONST EFI_GUID *Guid,\r
+ IN VOID *Data,\r
+ IN UINTN DataLength\r
+ );\r
+\r
+/**\r
+ Builds a Firmware Volume HOB.\r
+\r
+ This function builds a Firmware Volume HOB.\r
+ It can only be invoked during PEI phase;\r
+ for DXE phase, it will ASSERT() since PEI HOB is read-only for DXE phase.\r
+ If there is no additional space for HOB creation, then ASSERT().\r
+\r
+ @param BaseAddress The base address of the Firmware Volume.\r
+ @param Length The size of the Firmware Volume in bytes.\r
+\r
+**/\r
+VOID\r
+EFIAPI\r
+BuildFvHob (\r
+ IN EFI_PHYSICAL_ADDRESS BaseAddress,\r
+ IN UINT64 Length\r
+ );\r
+\r
+/**\r
+ Builds a Firmware Volume HOB and a resrouce descriptor hob \r
+\r
+ This function builds a Firmware Volume HOB.\r
+ It can only be invoked during PEI phase;\r
+ for DXE phase, it will ASSERT() since PEI HOB is read-only for DXE phase.\r
+ If there is no additional space for HOB creation, then ASSERT().\r
+\r
+ @param BaseAddress The base address of the Firmware Volume.\r
+ @param Length The size of the Firmware Volume in bytes.\r
+\r
+**/\r
+VOID\r
+EFIAPI\r
+BuildFvHobs ( \r
+ IN EFI_PHYSICAL_ADDRESS PhysicalStart,\r
+ IN UINT64 NumberOfBytes,\r
+ IN EFI_RESOURCE_ATTRIBUTE_TYPE *ResourceAttribute OPTIONAL\r
+ ); \r
+\r
+\r
+/**\r
+ Builds a EFI_HOB_TYPE_FV2 HOB.\r
+\r
+ This function builds a EFI_HOB_TYPE_FV2 HOB.\r
+ It can only be invoked during PEI phase;\r
+ for DXE phase, it will ASSERT() since PEI HOB is read-only for DXE phase.\r
+ If there is no additional space for HOB creation, then ASSERT().\r
+\r
+ @param BaseAddress The base address of the Firmware Volume.\r
+ @param Length The size of the Firmware Volume in bytes.\r
+ @param FvName The name of the Firmware Volume.\r
+ @param FileName The name of the file.\r
+ \r
+**/\r
+VOID\r
+EFIAPI\r
+BuildFv2Hob (\r
+ IN EFI_PHYSICAL_ADDRESS BaseAddress,\r
+ IN UINT64 Length,\r
+ IN CONST EFI_GUID *FvName,\r
+ IN CONST EFI_GUID *FileName\r
+ );\r
+\r
+/**\r
+ Builds a Capsule Volume HOB.\r
+\r
+ This function builds a Capsule Volume HOB.\r
+ It can only be invoked during PEI phase;\r
+ for DXE phase, it will ASSERT() since PEI HOB is read-only for DXE phase.\r
+ If there is no additional space for HOB creation, then ASSERT().\r
+\r
+ @param BaseAddress The base address of the Capsule Volume.\r
+ @param Length The size of the Capsule Volume in bytes.\r
+\r
+**/\r
+VOID\r
+EFIAPI\r
+BuildCvHob (\r
+ IN EFI_PHYSICAL_ADDRESS BaseAddress,\r
+ IN UINT64 Length\r
+ );\r
+\r
+/**\r
+ Builds a HOB for the CPU.\r
+\r
+ This function builds a HOB for the CPU.\r
+ It can only be invoked during PEI phase;\r
+ for DXE phase, it will ASSERT() since PEI HOB is read-only for DXE phase.\r
+ If there is no additional space for HOB creation, then ASSERT().\r
+\r
+ @param SizeOfMemorySpace The maximum physical memory addressability of the processor.\r
+ @param SizeOfIoSpace The maximum physical I/O addressability of the processor.\r
+\r
+**/\r
+VOID\r
+EFIAPI\r
+BuildCpuHob (\r
+ IN UINT8 SizeOfMemorySpace,\r
+ IN UINT8 SizeOfIoSpace\r
+ );\r
+\r
+/**\r
+ Builds a HOB for the Stack.\r
+\r
+ This function builds a HOB for the stack.\r
+ It can only be invoked during PEI phase;\r
+ for DXE phase, it will ASSERT() since PEI HOB is read-only for DXE phase.\r
+ If there is no additional space for HOB creation, then ASSERT().\r
+\r
+ @param BaseAddress The 64 bit physical address of the Stack.\r
+ @param Length The length of the stack in bytes.\r
+\r
+**/\r
+VOID\r
+EFIAPI\r
+BuildStackHob (\r
+ IN EFI_PHYSICAL_ADDRESS BaseAddress,\r
+ IN UINT64 Length\r
+ );\r
+\r
+/**\r
+ Update the Stack Hob if the stack has been moved\r
+\r
+ @param BaseAddress The 64 bit physical address of the Stack.\r
+ @param Length The length of the stack in bytes.\r
+\r
+**/\r
+VOID\r
+UpdateStackHob (\r
+ IN EFI_PHYSICAL_ADDRESS BaseAddress,\r
+ IN UINT64 Length\r
+ );\r
+\r
+\r
+/**\r
+ Builds a HOB for the BSP store.\r
+\r
+ This function builds a HOB for BSP store.\r
+ It can only be invoked during PEI phase;\r
+ for DXE phase, it will ASSERT() since PEI HOB is read-only for DXE phase.\r
+ If there is no additional space for HOB creation, then ASSERT().\r
+\r
+ @param BaseAddress The 64 bit physical address of the BSP.\r
+ @param Length The length of the BSP store in bytes.\r
+ @param MemoryType Type of memory allocated by this HOB.\r
+\r
+**/\r
+VOID\r
+EFIAPI\r
+BuildBspStoreHob (\r
+ IN EFI_PHYSICAL_ADDRESS BaseAddress,\r
+ IN UINT64 Length,\r
+ IN EFI_MEMORY_TYPE MemoryType\r
+ );\r
+\r
+/**\r
+ Builds a HOB for the memory allocation.\r
+\r
+ This function builds a HOB for the memory allocation.\r
+ It can only be invoked during PEI phase;\r
+ for DXE phase, it will ASSERT() since PEI HOB is read-only for DXE phase.\r
+ If there is no additional space for HOB creation, then ASSERT().\r
+\r
+ @param BaseAddress The 64 bit physical address of the memory.\r
+ @param Length The length of the memory allocation in bytes.\r
+ @param MemoryType Type of memory allocated by this HOB.\r
+\r
+**/\r
+VOID\r
+EFIAPI\r
+BuildMemoryAllocationHob (\r
+ IN EFI_PHYSICAL_ADDRESS BaseAddress,\r
+ IN UINT64 Length,\r
+ IN EFI_MEMORY_TYPE MemoryType\r
+ );\r
+\r
+\r
+VOID\r
+EFIAPI\r
+BuildExtractSectionHob (\r
+ IN EFI_GUID *Guid,\r
+ IN EXTRACT_GUIDED_SECTION_GET_INFO_HANDLER SectionGetInfo,\r
+ IN EXTRACT_GUIDED_SECTION_DECODE_HANDLER SectionExtraction\r
+ );\r
+\r
+VOID\r
+EFIAPI\r
+BuildPeCoffLoaderHob (\r
+ VOID\r
+ );\r
+\r
+\r
+/**\r
+ Allocates one or more 4KB pages of type EfiBootServicesData.\r
+\r
+ Allocates the number of 4KB pages of MemoryType and returns a pointer to the\r
+ allocated buffer. The buffer returned is aligned on a 4KB boundary. If Pages is 0, then NULL\r
+ is returned. If there is not enough memory remaining to satisfy the request, then NULL is\r
+ returned.\r
+\r
+ @param Pages The number of 4 KB pages to allocate.\r
+\r
+ @return A pointer to the allocated buffer or NULL if allocation fails.\r
+\r
+**/\r
+VOID * \r
+EFIAPI\r
+AllocatePages (\r
+ IN UINTN Pages\r
+ );\r
+ \r
+/**\r
+ Allocates a buffer of type EfiBootServicesData.\r
+\r
+ Allocates the number bytes specified by AllocationSize of type EfiBootServicesData and returns a\r
+ pointer to the allocated buffer. If AllocationSize is 0, then a valid buffer of 0 size is\r
+ returned. If there is not enough memory remaining to satisfy the request, then NULL is returned.\r
+\r
+ @param AllocationSize The number of bytes to allocate.\r
+\r
+ @return A pointer to the allocated buffer or NULL if allocation fails.\r
+\r
+**/\r
+VOID *\r
+EFIAPI\r
+AllocatePool (\r
+ IN UINTN AllocationSize\r
+ );\r
+ \r
+ \r
+/**\r
+ Allocates one or more 4KB pages of type EfiBootServicesData at a specified alignment.\r
+\r
+ Allocates the number of 4KB pages specified by Pages of type EfiBootServicesData with an\r
+ alignment specified by Alignment. The allocated buffer is returned. If Pages is 0, then NULL is\r
+ returned. If there is not enough memory at the specified alignment remaining to satisfy the\r
+ request, then NULL is returned.\r
+ If Alignment is not a power of two and Alignment is not zero, then ASSERT().\r
+\r
+ @param Pages The number of 4 KB pages to allocate.\r
+ @param Alignment The requested alignment of the allocation. Must be a power of two.\r
+ If Alignment is zero, then byte alignment is used.\r
+\r
+ @return A pointer to the allocated buffer or NULL if allocation fails.\r
+\r
+**/\r
+VOID *\r
+EFIAPI\r
+AllocateAlignedPages (\r
+ IN UINTN Pages,\r
+ IN UINTN Alignment\r
+ );\r
+\r
+\r
+EFI_STATUS\r
+EFIAPI\r
+LoadPeCoffImage (\r
+ IN VOID *PeCoffImage,\r
+ OUT EFI_PHYSICAL_ADDRESS *ImageAddress,\r
+ OUT UINT64 *ImageSize,\r
+ OUT EFI_PHYSICAL_ADDRESS *EntryPoint\r
+ );\r
+\r
+EFI_STATUS\r
+EFIAPI\r
+LoadDxeCoreFromFfsFile (\r
+ IN EFI_PEI_FILE_HANDLE FileHandle,\r
+ IN UINTN StackSize\r
+ );\r
+\r
+EFI_STATUS\r
+EFIAPI\r
+LoadDxeCoreFromFv (\r
+ IN UINTN *FvInstance, OPTIONAL\r
+ IN UINTN StackSize\r
+ );\r
+\r
+EFI_STATUS\r
+EFIAPI\r
+DecompressFirstFv (\r
+ VOID\r
+ );\r
+\r
+VOID\r
+EFIAPI\r
+AddDxeCoreReportStatusCodeCallback (\r
+ VOID\r
+ );\r
+\r
+\r
+#endif\r