--- /dev/null
+#!/usr/bin/python
+
+#
+# Copyright 2014 Apple Inc. All righes reserved.
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php.
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+
+import lldb
+import os
+import uuid
+import string
+import commands
+import optparse
+import shlex
+
+guid_dict = {}
+
+
+def EFI_GUID_TypeSummary (valobj,internal_dict):
+ """ Type summary for EFI GUID, print C Name if known
+ """
+ # typedef struct {
+ # UINT32 Data1;
+ # UINT16 Data2;
+ # UINT16 Data3;
+ # UINT8 Data4[8];
+ # } EFI_GUID;
+ SBError = lldb.SBError()
+
+ data1_val = valobj.GetChildMemberWithName('Data1')
+ data1 = data1_val.GetValueAsUnsigned(0)
+ data2_val = valobj.GetChildMemberWithName('Data2')
+ data2 = data2_val.GetValueAsUnsigned(0)
+ data3_val = valobj.GetChildMemberWithName('Data3')
+ data3 = data3_val.GetValueAsUnsigned(0)
+ str = "%x-%x-%x-" % (data1, data2, data3)
+
+ data4_val = valobj.GetChildMemberWithName('Data4')
+ for i in range (data4_val.num_children):
+ if i == 2:
+ str +='-'
+ str += "%02x" % data4_val.GetChildAtIndex(i).data.GetUnsignedInt8(SBError, 0)
+
+ return guid_dict.get (str.upper(), '')
+
+
+
+EFI_STATUS_Dict = {
+ (0x8000000000000000 | 1): "Load Error",
+ (0x8000000000000000 | 2): "Invalid Parameter",
+ (0x8000000000000000 | 3): "Unsupported",
+ (0x8000000000000000 | 4): "Bad Buffer Size",
+ (0x8000000000000000 | 5): "Buffer Too Small",
+ (0x8000000000000000 | 6): "Not Ready",
+ (0x8000000000000000 | 7): "Device Error",
+ (0x8000000000000000 | 8): "Write Protected",
+ (0x8000000000000000 | 9): "Out of Resources",
+ (0x8000000000000000 | 10): "Volume Corrupt",
+ (0x8000000000000000 | 11): "Volume Full",
+ (0x8000000000000000 | 12): "No Media",
+ (0x8000000000000000 | 13): "Media changed",
+ (0x8000000000000000 | 14): "Not Found",
+ (0x8000000000000000 | 15): "Access Denied",
+ (0x8000000000000000 | 16): "No Response",
+ (0x8000000000000000 | 17): "No mapping",
+ (0x8000000000000000 | 18): "Time out",
+ (0x8000000000000000 | 19): "Not started",
+ (0x8000000000000000 | 20): "Already started",
+ (0x8000000000000000 | 21): "Aborted",
+ (0x8000000000000000 | 22): "ICMP Error",
+ (0x8000000000000000 | 23): "TFTP Error",
+ (0x8000000000000000 | 24): "Protocol Error",
+
+ 0 : "Success",
+ 1 : "Warning Unknown Glyph",
+ 2 : "Warning Delete Failure",
+ 3 : "Warning Write Failure",
+ 4 : "Warning Buffer Too Small",
+
+ (0x80000000 | 1): "Load Error",
+ (0x80000000 | 2): "Invalid Parameter",
+ (0x80000000 | 3): "Unsupported",
+ (0x80000000 | 4): "Bad Buffer Size",
+ (0x80000000 | 5): "Buffer Too Small",
+ (0x80000000 | 6): "Not Ready",
+ (0x80000000 | 7): "Device Error",
+ (0x80000000 | 8): "Write Protected",
+ (0x80000000 | 9): "Out of Resources",
+ (0x80000000 | 10): "Volume Corrupt",
+ (0x80000000 | 11): "Volume Full",
+ (0x80000000 | 12): "No Media",
+ (0x80000000 | 13): "Media changed",
+ (0x80000000 | 14): "Not Found",
+ (0x80000000 | 15): "Access Denied",
+ (0x80000000 | 16): "No Response",
+ (0x80000000 | 17): "No mapping",
+ (0x80000000 | 18): "Time out",
+ (0x80000000 | 19): "Not started",
+ (0x80000000 | 20): "Already started",
+ (0x80000000 | 21): "Aborted",
+ (0x80000000 | 22): "ICMP Error",
+ (0x80000000 | 23): "TFTP Error",
+ (0x80000000 | 24): "Protocol Error",
+}
+
+def EFI_STATUS_TypeSummary (valobj,internal_dict):
+ #
+ # Return summary string for EFI_STATUS from dictionary
+ #
+ Status = valobj.GetValueAsUnsigned(0)
+ return EFI_STATUS_Dict.get (Status, '')
+
+
+def EFI_TPL_TypeSummary (valobj,internal_dict):
+ #
+ # Return TPL values
+ #
+
+ if valobj.TypeIsPointerType():
+ return ""
+
+ Tpl = valobj.GetValueAsUnsigned(0)
+ if Tpl < 4:
+ Str = "%d" % Tpl
+ elif Tpl == 6:
+ Str = "TPL_DRIVER (Obsolete Concept in edk2)"
+ elif Tpl < 8:
+ Str = "TPL_APPLICATION"
+ if Tpl - 4 > 0:
+ Str += " + " + "%d" % (Tpl - 4)
+ elif Tpl < 16:
+ Str = "TPL_CALLBACK"
+ if Tpl - 8 > 0:
+ Str += " + " + "%d" % (Tpl - 4)
+ elif Tpl < 31:
+ Str = "TPL_NOTIFY"
+ if Tpl - 16 > 0:
+ Str += " + " + "%d" % (Tpl - 4)
+ elif Tpl == 31:
+ Str = "TPL_HIGH_LEVEL"
+ else:
+ Str = "Invalid TPL"
+
+ return Str
+
+
+def CHAR16_TypeSummary (valobj,internal_dict):
+ #
+ # Display EFI CHAR16 'unsigned short' as string
+ #
+ SBError = lldb.SBError()
+ Str = ''
+ if valobj.TypeIsPointerType():
+ if valobj.GetValueAsUnsigned () == 0:
+ return "NULL"
+
+ # CHAR16 * max string size 1024
+ for i in range (1024):
+ Char = valobj.GetPointeeData(i,1).GetUnsignedInt16(SBError, 0)
+ if SBError.fail or Char == 0:
+ break
+ Str += unichr (Char)
+ Str = 'L"' + Str + '"'
+ return Str.encode ('utf-8', 'replace')
+
+ if valobj.num_children == 0:
+ # CHAR16
+ if chr (valobj.unsigned) in string.printable:
+ Str = "L'" + unichr (valobj.unsigned) + "'"
+ return Str.encode ('utf-8', 'replace')
+ else:
+ # CHAR16 []
+ for i in range (valobj.num_children):
+ Char = valobj.GetChildAtIndex(i).data.GetUnsignedInt16(SBError, 0)
+ if Char == 0:
+ break
+ Str += unichr (Char)
+ Str = 'L"' + Str + '"'
+ return Str.encode ('utf-8', 'replace')
+
+ return Str
+
+def CHAR8_TypeSummary (valobj,internal_dict):
+ #
+ # Display EFI CHAR8 'signed char' as string
+ # unichr() is used as a junk string can produce an error message like this:
+ # UnicodeEncodeError: 'ascii' codec can't encode character u'\x90' in position 1: ordinal not in range(128)
+ #
+ SBError = lldb.SBError()
+ Str = ''
+ if valobj.TypeIsPointerType():
+ if valobj.GetValueAsUnsigned () == 0:
+ return "NULL"
+
+ # CHAR8 * max string size 1024
+ for i in range (1024):
+ Char = valobj.GetPointeeData(i,1).GetUnsignedInt8(SBError, 0)
+ if SBError.fail or Char == 0:
+ break
+ Str += unichr (Char)
+ Str = '"' + Str + '"'
+ return Str.encode ('utf-8', 'replace')
+
+ if valobj.num_children == 0:
+ # CHAR8
+ if chr (valobj.unsigned) in string.printable:
+ Str = '"' + unichr (valobj.unsigned) + '"'
+ return Str.encode ('utf-8', 'replace')
+ else:
+ # CHAR8 []
+ for i in range (valobj.num_children):
+ Char = valobj.GetChildAtIndex(i).data.GetUnsignedInt8(SBError, 0)
+ if Char == 0:
+ break
+ Str += unichr (Char)
+ Str = '"' + Str + '"'
+ return Str.encode ('utf-8', 'replace')
+
+ return Str
+
+device_path_dict = {
+ (0x01, 0x01): "PCI_DEVICE_PATH",
+ (0x01, 0x02): "PCCARD_DEVICE_PATH",
+ (0x01, 0x03): "MEMMAP_DEVICE_PATH",
+ (0x01, 0x04): "VENDOR_DEVICE_PATH",
+ (0x01, 0x05): "CONTROLLER_DEVICE_PATH",
+ (0x02, 0x01): "ACPI_HID_DEVICE_PATH",
+ (0x02, 0x02): "ACPI_EXTENDED_HID_DEVICE_PATH",
+ (0x02, 0x03): "ACPI_ADR_DEVICE_PATH",
+ (0x03, 0x01): "ATAPI_DEVICE_PATH",
+ (0x03, 0x12): "SATA_DEVICE_PATH",
+ (0x03, 0x02): "SCSI_DEVICE_PATH",
+ (0x03, 0x03): "FIBRECHANNEL_DEVICE_PATH",
+ (0x03, 0x04): "F1394_DEVICE_PATH",
+ (0x03, 0x05): "USB_DEVICE_PATH",
+ (0x03, 0x0f): "USB_CLASS_DEVICE_PATH",
+ (0x03, 0x10): "FW_SBP2_UNIT_LUN_DEVICE_PATH",
+ (0x03, 0x11): "DEVICE_LOGICAL_UNIT_DEVICE_PATH",
+ (0x03, 0x06): "I2O_DEVICE_PATH",
+ (0x03, 0x0b): "MAC_ADDR_DEVICE_PATH",
+ (0x03, 0x0c): "IPv4_DEVICE_PATH",
+ (0x03, 0x09): "INFINIBAND_DEVICE_PATH",
+ (0x03, 0x0e): "UART_DEVICE_PATH",
+ (0x03, 0x0a): "VENDOR_DEVICE_PATH",
+ (0x03, 0x13): "ISCSI_DEVICE_PATH",
+ (0x04, 0x01): "HARDDRIVE_DEVICE_PATH",
+ (0x04, 0x02): "CDROM_DEVICE_PATH",
+ (0x04, 0x03): "VENDOR_DEVICE_PATH",
+ (0x04, 0x04): "FILEPATH_DEVICE_PATH",
+ (0x04, 0x05): "MEDIA_PROTOCOL_DEVICE_PATH",
+ (0x05, 0x01): "BBS_BBS_DEVICE_PATH",
+ (0x7F, 0xFF): "EFI_DEVICE_PATH_PROTOCOL",
+ (0xFF, 0xFF): "EFI_DEVICE_PATH_PROTOCOL",
+}
+
+def EFI_DEVICE_PATH_PROTOCOL_TypeSummary (valobj,internal_dict):
+ #
+ #
+ #
+ if valobj.TypeIsPointerType():
+ # EFI_DEVICE_PATH_PROTOCOL *
+ return ""
+
+ Str = ""
+ if valobj.num_children == 3:
+ # EFI_DEVICE_PATH_PROTOCOL
+ Type = valobj.GetChildMemberWithName('Type').unsigned
+ SubType = valobj.GetChildMemberWithName('SubType').unsigned
+ if (Type, SubType) in device_path_dict:
+ TypeStr = device_path_dict[Type, SubType]
+ else:
+ TypeStr = ""
+
+ LenLow = valobj.GetChildMemberWithName('Length').GetChildAtIndex(0).unsigned
+ LenHigh = valobj.GetChildMemberWithName('Length').GetChildAtIndex(1).unsigned
+ Len = LenLow + (LenHigh >> 8)
+
+ Address = long ("%d" % valobj.addr)
+ if (Address == lldb.LLDB_INVALID_ADDRESS):
+ # Need to reserach this, it seems to be the nested struct case
+ ExprStr = ""
+ elif (Type & 0x7f == 0x7f):
+ ExprStr = "End Device Path" if SubType == 0xff else "End This Instance"
+ else:
+ ExprStr = "expr *(%s *)0x%08x" % (TypeStr, Address)
+
+ Str = " {\n"
+ Str += " (UINT8) Type = 0x%02x // %s\n" % (Type, "END" if (Type & 0x7f == 0x7f) else "")
+ Str += " (UINT8) SubType = 0x%02x // %s\n" % (SubType, ExprStr)
+ Str += " (UINT8 [2]) Length = { // 0x%04x (%d) bytes\n" % (Len, Len)
+ Str += " (UINT8) [0] = 0x%02x\n" % LenLow
+ Str += " (UINT8) [1] = 0x%02x\n" % LenHigh
+ Str += " }\n"
+ if (Type & 0x7f == 0x7f) and (SubType == 0xff):
+ pass
+ elif ExprStr != "":
+ NextNode = Address + Len
+ Str += "// Next node 'expr *(EFI_DEVICE_PATH_PROTOCOL *)0x%08x'\n" % NextNode
+
+ return Str
+
+
+
+def TypePrintFormating(debugger):
+ #
+ # Set the default print formating for EFI types in lldb.
+ # seems lldb defaults to decimal.
+ #
+ category = debugger.GetDefaultCategory()
+ FormatBool = lldb.SBTypeFormat(lldb.eFormatBoolean)
+ category.AddTypeFormat(lldb.SBTypeNameSpecifier("BOOLEAN"), FormatBool)
+
+ FormatHex = lldb.SBTypeFormat(lldb.eFormatHex)
+ category.AddTypeFormat(lldb.SBTypeNameSpecifier("UINT64"), FormatHex)
+ category.AddTypeFormat(lldb.SBTypeNameSpecifier("INT64"), FormatHex)
+ category.AddTypeFormat(lldb.SBTypeNameSpecifier("UINT32"), FormatHex)
+ category.AddTypeFormat(lldb.SBTypeNameSpecifier("INT32"), FormatHex)
+ category.AddTypeFormat(lldb.SBTypeNameSpecifier("UINT16"), FormatHex)
+ category.AddTypeFormat(lldb.SBTypeNameSpecifier("INT16"), FormatHex)
+ category.AddTypeFormat(lldb.SBTypeNameSpecifier("UINT8"), FormatHex)
+ category.AddTypeFormat(lldb.SBTypeNameSpecifier("INT8"), FormatHex)
+ category.AddTypeFormat(lldb.SBTypeNameSpecifier("UINTN"), FormatHex)
+ category.AddTypeFormat(lldb.SBTypeNameSpecifier("INTN"), FormatHex)
+ category.AddTypeFormat(lldb.SBTypeNameSpecifier("CHAR8"), FormatHex)
+ category.AddTypeFormat(lldb.SBTypeNameSpecifier("CHAR16"), FormatHex)
+
+ category.AddTypeFormat(lldb.SBTypeNameSpecifier("EFI_PHYSICAL_ADDRESS"), FormatHex)
+ category.AddTypeFormat(lldb.SBTypeNameSpecifier("PHYSICAL_ADDRESS"), FormatHex)
+ category.AddTypeFormat(lldb.SBTypeNameSpecifier("EFI_STATUS"), FormatHex)
+ category.AddTypeFormat(lldb.SBTypeNameSpecifier("EFI_TPL"), FormatHex)
+ category.AddTypeFormat(lldb.SBTypeNameSpecifier("EFI_LBA"), FormatHex)
+ category.AddTypeFormat(lldb.SBTypeNameSpecifier("EFI_BOOT_MODE"), FormatHex)
+ category.AddTypeFormat(lldb.SBTypeNameSpecifier("EFI_FV_FILETYPE"), FormatHex)
+
+ #
+ # Smart type printing for EFI
+ #
+ debugger.HandleCommand("type summary add EFI_GUID --python-function lldbefi.EFI_GUID_TypeSummary")
+ debugger.HandleCommand("type summary add EFI_STATUS --python-function lldbefi.EFI_STATUS_TypeSummary")
+ debugger.HandleCommand("type summary add EFI_TPL --python-function lldbefi.EFI_TPL_TypeSummary")
+ debugger.HandleCommand("type summary add EFI_DEVICE_PATH_PROTOCOL --python-function lldbefi.EFI_DEVICE_PATH_PROTOCOL_TypeSummary")
+
+ debugger.HandleCommand("type summary add CHAR16 --python-function lldbefi.CHAR16_TypeSummary")
+ debugger.HandleCommand('type summary add --regex "CHAR16 \[[0-9]+\]" --python-function lldbefi.CHAR16_TypeSummary')
+ debugger.HandleCommand("type summary add CHAR8 --python-function lldbefi.CHAR8_TypeSummary")
+ debugger.HandleCommand('type summary add --regex "CHAR8 \[[0-9]+\]" --python-function lldbefi.CHAR8_TypeSummary')
+
+
+gEmulatorBreakWorkaroundNeeded = True
+
+def LoadEmulatorEfiSymbols(frame, bp_loc , internal_dict):
+ #
+ # This is an lldb breakpoint script, and assumes the breakpoint is on a
+ # function with the same prototype as SecGdbScriptBreak(). The
+ # argument names are important as lldb looks them up.
+ #
+ # VOID
+ # SecGdbScriptBreak (
+ # char *FileName,
+ # int FileNameLength,
+ # long unsigned int LoadAddress,
+ # int AddSymbolFlag
+ # )
+ # {
+ # return;
+ # }
+ #
+ # When the emulator loads a PE/COFF image, it calls the stub function with
+ # the filename of the symbol file, the length of the FileName, the
+ # load address and a flag to indicate if this is a load or unload operation
+ #
+ global gEmulatorBreakWorkaroundNeeded
+
+ if gEmulatorBreakWorkaroundNeeded:
+ # turn off lldb debug prints on SIGALRM (EFI timer tick)
+ frame.thread.process.target.debugger.HandleCommand("process handle SIGALRM -n false")
+ gEmulatorBreakWorkaroundNeeded = False
+
+ # Convert C string to Python string
+ Error = lldb.SBError()
+ FileNamePtr = frame.FindVariable ("FileName").GetValueAsUnsigned()
+ FileNameLen = frame.FindVariable ("FileNameLength").GetValueAsUnsigned()
+ FileName = frame.thread.process.ReadCStringFromMemory (FileNamePtr, FileNameLen, Error)
+ if not Error.Success():
+ print "!ReadCStringFromMemory() did not find a %d byte C string at %x" % (FileNameLen, FileNamePtr)
+ # make breakpoint command contiue
+ frame.GetThread().GetProcess().Continue()
+
+ debugger = frame.thread.process.target.debugger
+ if frame.FindVariable ("AddSymbolFlag").GetValueAsUnsigned() == 1:
+ LoadAddress = frame.FindVariable ("LoadAddress").GetValueAsUnsigned()
+
+ debugger.HandleCommand ("target modules add %s" % FileName)
+ print "target modules load --slid 0x%x %s" % (LoadAddress, FileName)
+ debugger.HandleCommand ("target modules load --slide 0x%x --file %s" % (LoadAddress, FileName))
+ else:
+ target = debugger.GetSelectedTarget()
+ for SBModule in target.module_iter():
+ ModuleName = SBModule.GetFileSpec().GetDirectory() + '/'
+ ModuleName += SBModule.GetFileSpec().GetFilename()
+ if FileName == ModuleName or FileName == SBModule.GetFileSpec().GetFilename():
+ target.ClearModuleLoadAddress (SBModule)
+ if not target.RemoveModule (SBModule):
+ print "!lldb.target.RemoveModule (%s) FAILED" % SBModule
+
+ # make breakpoint command contiue
+ frame.thread.process.Continue()
+
+def GuidToCStructStr (guid, Name=False):
+ #
+ # Convert a 16-byte bytesarry (or bytearray compat object) to C guid string
+ # { 0xB402621F, 0xA940, 0x1E4A, { 0x86, 0x6B, 0x4D, 0xC9, 0x16, 0x2B, 0x34, 0x7C } }
+ #
+ # Name=True means lookup name in GuidNameDict and us it if you find it
+ #
+
+ if not isinstance (guid, bytearray):
+ # convert guid object to UUID, and UUID to bytearray
+ Uuid = uuid.UUID(guid)
+ guid = bytearray (Uuid.bytes_le)
+
+ return "{ 0x%02.2X%02.2X%02.2X%02.2X, 0x%02.2X%02.2X, 0x%02.2X%02.2X, { 0x%02.2X, 0x%02.2X, 0x%02.2X, 0x%02.2X, 0x%02.2X, 0x%02.2X, 0x%02.2X, 0x%02.2X } }" % \
+ (guid[3], guid[2], guid[1], guid[0], guid[5], guid[4], guid[7], guid[6], guid[8], guid[9], guid[10], guid[11], guid[12], guid[13], guid[14], guid[15])
+
+def ParseGuidString(GuidStr):
+ #
+ # Error check and convert C Guid init to string
+ # ParseGuidString("49152E77-1ADA-4764-B7A2-7AFEFED95E8B")
+ # ParseGuidString("{ 0xBA24B391, 0x73FD, 0xC54C, { 0x9E, 0xAF, 0x0C, 0xA7, 0x8A, 0x35, 0x46, 0xD1 } }")
+ #
+
+ if "{" in GuidStr :
+ # convert C form "{ 0xBA24B391, 0x73FD, 0xC54C, { 0x9E, 0xAF, 0x0C, 0xA7, 0x8A, 0x35, 0x46, 0xD1 } }"
+ # to string form BA24B391-73FD-C54C-9EAF-0CA78A3546D1
+ # make a list of Hex numbers like: ['0xBA24B391', '0x73FD', '0xC54C', '0x9E', '0xAF', '0x0C', '0xA7', '0x8A', '0x35', '0x46', '0xD1']
+ Hex = ''.join(x for x in GuidStr if x not in '{,}').split()
+ Str = "%08X-%04X-%04X-%02.2X%02.2X-%02.2X%02.2X%02.2X%02.2X%02.2X%02.2X" % \
+ (int(Hex[0], 0), int(Hex[1], 0), int(Hex[2], 0), int(Hex[3], 0), int(Hex[4], 0), \
+ int(Hex[5], 0), int(Hex[6], 0), int(Hex[7], 0), int(Hex[8], 0), int(Hex[9], 0), int(Hex[10], 0))
+ elif GuidStr.count('-') == 4:
+ # validate "49152E77-1ADA-4764-B7A2-7AFEFED95E8B" form
+ Check = "%s" % str(uuid.UUID(GuidStr)).upper()
+ if GuidStr.upper() == Check:
+ Str = GuidStr.upper()
+ else:
+ Ste = ""
+ else:
+ Str = ""
+
+ return Str
+
+
+def create_guid_options():
+ usage = "usage: %prog [data]"
+ description='''lookup EFI_GUID by CName, C struct, or GUID string and print out all three.
+ '''
+ parser = optparse.OptionParser(description=description, prog='guid',usage=usage)
+ return parser
+
+def efi_guid_command(debugger, command, result, dict):
+ # Use the Shell Lexer to properly parse up command options just like a
+ # shell would
+ command_args = shlex.split(command)
+ parser = create_guid_options()
+ try:
+ (options, args) = parser.parse_args(command_args)
+ if len(args) >= 1:
+ if args[0] == "{":
+ # caller forgot to quote the string"
+ # mark arg[0] a string containing all args[n]
+ args[0] = ' '.join(args)
+ GuidStr = ParseGuidString (args[0])
+ if GuidStr == "":
+ # return Key of GuidNameDict for value args[0]
+ GuidStr = [Key for Key, Value in guid_dict.iteritems() if Value == args[0]][0]
+ GuidStr = GuidStr.upper()
+ except:
+ # if you don't handle exceptions, passing an incorrect argument to the OptionParser will cause LLDB to exit
+ # (courtesy of OptParse dealing with argument errors by throwing SystemExit)
+ result.SetError ("option parsing failed")
+ return
+
+
+ if len(args) >= 1:
+ if GuidStr in guid_dict:
+ print "%s = %s" % (guid_dict[GuidStr], GuidStr)
+ print "%s = %s" % (guid_dict[GuidStr], GuidToCStructStr (GuidStr))
+ else:
+ print GuidStr
+ else:
+ # dump entire dictionary
+ width = max(len(v) for k,v in guid_dict.iteritems())
+ for value in sorted(guid_dict, key=guid_dict.get):
+ print '%-*s %s %s' % (width, guid_dict[value], value, GuidToCStructStr(value))
+
+ return
+
+
+#
+########## Code that runs when this script is imported into LLDB ###########
+#
+def __lldb_init_module (debugger, internal_dict):
+ # This initializer is being run from LLDB in the embedded command interpreter
+ # Make the options so we can generate the help text for the new LLDB
+ # command line command prior to registering it with LLDB below
+
+ global guid_dict
+
+ # Source Guid.xref file if we can find it
+ inputfile = os.getcwd()
+ inputfile += os.sep + os.pardir + os.sep + 'FV' + os.sep + 'Guid.xref'
+ with open(inputfile) as f:
+ for line in f:
+ data = line.split(' ')
+ if len(data) >= 2:
+ guid_dict[data[0].upper()] = data[1].strip('\n')
+
+ # init EFI specific type formaters
+ TypePrintFormating (debugger)
+
+
+ # add guid command
+ parser = create_guid_options()
+ efi_guid_command.__doc__ = parser.format_help()
+ debugger.HandleCommand('command script add -f lldbefi.efi_guid_command guid')
+
+
+ Target = debugger.GetTargetAtIndex(0)
+ if Target:
+ Breakpoint = Target.BreakpointCreateByName('SecGdbScriptBreak')
+ if Breakpoint.GetNumLocations() == 1:
+ # Set the emulator breakpoints, if we are in the emulator
+ debugger.HandleCommand("breakpoint command add -s python -F lldbefi.LoadEmulatorEfiSymbols {id}".format(id=Breakpoint.GetID()))
+ print 'Type r to run emulator. SecLldbScriptBreak armed. EFI modules should now get source level debugging in the emulator.'
projects / mirror_edk2.git / blobdiff